MC74HC74A. Dual D Flip Flop with Set and Reset. High Performance Silicon Gate CMOS
|
|
- Darlene Wilcox
- 5 years ago
- Views:
Transcription
1 Dual D Flip Flop wih Se and Rese High Performance Silicon Gae CMOS The MC4HC4A is idenical in pinou o he LS4. The device inpus are compaible wih sandard CMOS oupus; wih pullup resisors, hey are compaible wih LSTTL oupus. This device consiss of wo D flip flops wih individual Se, Rese, and Clock inpus. Informaion a a D inpu is ransferred o he corresponding Q oupu on he nex posiive going edge of he clock inpu. Boh Q and Q oupus are available from each flip flop. The Se and Rese inpus are asynchronous. Feaures Oupu Drive Capabiliy: 0 LSTTL Loads Oupus Direcly Inerface o CMOS, NMOS, and TTL Operaing olage Range: 2.0 o 6.0 Low Inpu Curren:.0 A High Noise Immuniy Characerisic of CMOS Devices In Compliance wih he JEDEC Sandard No..0 A Requiremens Chip Complexiy: 28 FETs or 32 Equivalen Gaes Pb Free Packages are Available hp://onsemi.com 4 PDIP 4 N SUFFIX CASE 646 SOIC 4 D SUFFIX CASE 5A TSSOP 4 DT SUFFIX CASE 948G 4 MARKING DIAGRAMS MC4HC4AN AWLYYWWG 4 HC4AG AWLYWW HC 4A ALYW 4 4 SOEIAJ 4 F SUFFIX CASE 965 4HC4A ALYWG A = Assembly Locaion L, WL = Wafer Lo Y, YY = Year W, WW = Work Week G or = Pb Free Package (Noe: Microdo may be in eiher locaion) ORDERING INFORMATION See deailed ordering and shipping informaion in he package dimensions secion on page 4 of his daa shee. Semiconducor Componens Indusries, LLC, 2006 Ocober, 2006 Rev. Publicaion Order Number: MC4HC4A/D
2 PIN ASSIGNMENT LOGIC DIAGRAM RESET 4 RESET DATA CLOCK SET Q Q FUNCTION TABLE Inpus Oupus Se Rese Clock Daa Q Q L H X X H L H L X X L H L L X X H* H* H H H H L H H L L H H H L X No Change H H H X No Change H H X No Change RESET 2 DATA 2 CLOCK 2 SET 2 Q2 Q2 DATA CLOCK SET RESET 2 DATA 2 CLOCK 2 SET PIN 4 = PIN = Q Q Q2 Q2 *Boh oupus will remain high as long as Se and Rese are low, bu he oupu saes are unpredicable if Se and Rese go high simulaneously. MAXIMUM RATINGS ÎÎ Symbol Parameer alue Uni ÎÎ DC Supply olage (Referenced o ) 0.5 o +.0 in ÎÎ DC Inpu olage (Referenced o ) Î 0.5 o ou ÎÎ DC Oupu olage (Referenced o ) Î 0.5 o I in ÎÎ DC Inpu Curren, per Pin Î ± 20 ma I ou DC Oupu Curren, per Pin ± 25 ma I CC DC Supply Curren, and Pins ± 50 ma P D Power Dissipaion in Sill Air, Plasic DIP 50 mw Î SOIC Package Î 500 Î TSSOP Package Î 450 T sg Sorage Temperaure 65 o + 50 C T L Lead Temperaure, mm from Case for 0 Seconds C (Plasic DIP, SOIC or TSSOP Package) 260 Î 300 Sresses exceeding Maximum Raings may damage he device. Maximum Raings are sress raings only. Funcional operaion above he Recommended Operaing Condiions is no implied. Exended exposure o sresses above he Recommended Operaing Condiions may affec device reliabiliy. Deraing Plasic DIP: 0 mw/ C from 65 o 25 C SOIC Package: mw/ C from 65 o 25 C TSSOP Package: 6. mw/ C from 65 o 25 C For high frequency or heavy load consideraions, see Chaper 2 of he ON Semiconducor High Speed CMOS Daa Book (DL29/D). RECOMMENDED OPERATING CONDITIONS SymbolÎÎ Parameer Min Max Uni ÎÎ DC Supply olage (Referenced o ) in, ou ÎÎ DC Inpu olage, Oupu olage (Referenced o ) 0 T A Operaing Temperaure, All Package Types C r, f Inpu Rise and Fall Time ÎÎ CC = ns (Figures, 2, 3) = Î = = This device conains proecion circuiry o guard agains damage due o high saic volages or elecric fields. However, precauions mus be aken o avoid applicaions of any volage higher han maximum raed volages o his high impedance circui. For proper operaion, in and ou should be consrained o he range ( in or ou ). Unused inpus mus always be ied o an appropriae logic volage level (e.g., eiher or ). Unused oupus mus be lef open. hp://onsemi.com 2
3 DC ELECTRICAL CHARACTERISTICS (olages Referenced o ) Guaraneed Limi 55 o Symbol Parameer Tes Condiions 25 C 85 C 25 C Uni IH Î Î Minimum High Level Inpu ou = 0. or olage Î I ou 20 A Î IL Maximum Low Level Inpu Î olage Î ou = 0. or I ou 20 A Î OH Minimum High Level Oupu Î Î in = IH or IL olage I ou 20 A in = IH or IL I ou 2.4 ma I ou 4.0 ma I ou 5.2 ma OL Î Maximum Low Level Oupu Î in = IH or IL ÎÎ olage Î I ou 20 A Î in = IH or IL I ou 2.4 ma I ou 4.0 ma I ou 5.2 ma I in Maximum Inpu Leakage Curren in = or 6.0 ± 0. ±.0 ±.0 A I CC Maximum Quiescen Supply Î Î in = or ÎÎ A Curren (per Package) I ou = 0 A NOTE: Informaion on ypical parameric values can be found in Chaper 2 of he ON Semiconducor High Speed CMOS Daa Book (DL29/D). AC ELECTRICAL CHARACTERISTICS (C L = 50 pf, Inpu r = f = 6.0 ns) Guaraneed Limi 55 o Symbol Parameer 25 C 85 C 25 C Uni f max ÎÎ Maximum Clock Frequency ( Duy Cycle) MHz (Figures and 4) Î PLH, Î Maximum Propagaion Delay, Clock o Q or Q ns PHL Î (Figures and 4) PLH, Î Maximum Propagaion Delay, Se or Rese o Q or Q ns PHL (Figures 2 and 4) ÎÎ TLH, Î Maximum Oupu Transiion Time, Any Oupu ns THL (Figures and 4) C in Maximum Inpu Capaciance pf NOTE: For propagaion delays wih loads oher han 50 pf, and informaion on ypical parameric values, see Chaper 2 of he ON Semiconducor High Speed CMOS Daa Book (DL29/D). 25 C, = 5.0 C PD Power Dissipaion Capaciance (Per Flip Flop)* 32 pf * Used o deermine he no load dynamic power consumpion: P D = C PD 2 CC f + I CC. For load consideraions, see Chaper 2 of he ON Semiconducor High Speed CMOS Daa Book (DL29/D). hp://onsemi.com 3
4 TIMING REQUIREMENTS (Inpu r = f = 6.0 ns) Guaraneed Limi 55 o Symbol Parameer 25 C 85 C 25 C Î Uni su Minimum Seup Time, Daa o Clock ns ÎÎ (Figure 3) Î h Minimum Hold Time, Clock o Daa ns ÎÎ (Figure 3) Î rec Minimum Recovery Time, Se or Rese Inacive o Clock ns ÎÎ (Figure 2) Î w Minimum Pulse Widh, Clock ns ÎÎ (Figure ) Î w Minimum Pulse Widh, Se or Rese ns ÎÎ (Figure 2) Î r, f Maximum Inpu Rise and Fall Times ns ÎÎ (Figures, 2, 3) Î ORDERING INFORMATION MC4HC4AN MC4HC4ANG Device Package Shipping PDIP 4 PDIP 4 25 Unis / Rail MC4HC4AD MC4HC4ADG MC4HC4ADR2 MC4HC4ADR2G MC4HC4ADTR2 MC4HC4ADTR2G MC4HC4AF MC4HC4AFG SOIC 4 SOIC 4 SOIC 4 SOIC 4 TSSOP 4* TSSOP 4* SOEIAJ 4 SOEIAJ 4 55 Unis / Rail 2500 / Tape & Reel 50 Unis / Rail MC4HC4AFEL MC4HC4AFELG SOEIAJ 4 SOEIAJ / Tape & Reel For informaion on ape and reel specificaions, including par orienaion and ape sizes, please refer o our Tape and Reel Packaging Specificaions Brochure, BRD80/D. *This package is inherenly Pb Free. hp://onsemi.com 4
5 SWITCHING WAEFORMS CLOCK 90% 0% w f r /f max SET OR RESET Q OR Q w PHL Q or Q 90% 0% PLH TLH PHL THL Q OR Q CLOCK PLH rec Figure. Figure 2. DATA CLOCK su ALID h DEICE UNDER TEST OUTPUT TEST POINT C L * *Includes all probe and jig capaciance Figure 3. Figure 4. 4, 0 SET DATA 2, 2 5, 9 Q 3, CLOCK 6, 8 Q, 3 RESET Figure 5. EXPANDED LOGIC DIAGRAM hp://onsemi.com 5
6 PACKAGE DIMENSIONS PDIP 4 CASE ISSUE P 4 8 B NOTES:. DIMENSIONING AND TOLERANCING PER ANSI Y4.5M, CONTROLLING DIMENSION: INCH. 3. DIMENSION L TO CENTER OF LEADS WHEN FORMED PARALLEL. 4. DIMENSION B DOES NOT INCLUDE MOLD FLASH. 5. ROUNDED CORNERS OPTIONAL. T N SEATING PLANE A INCHES MILLIMETERS DIM MIN MAX MIN MAX A B F L C D C F G 0.00 BSC 2.54 BSC H J K K J L M 0 0 H G D 4 PL M N (0.005) M hp://onsemi.com 6
7 PACKAGE DIMENSIONS SOIC 4 CASE 5A 03 ISSUE H T SEATING PLANE G A 4 8 D 4 PL B K P PL C 0.25 (0.00) M T B S A S 0.25 (0.00) M B M NOTES:. DIMENSIONING AND TOLERANCING PER ANSI Y4.5M, CONTROLLING DIMENSION: MILLIMETER. 3. DIMENSIONS A AND B DO NOT INCLUDE MOLD PROTRUSION. 4. MAXIMUM MOLD PROTRUSION 0.5 (0.006) PER SIDE. 5. DIMENSION D DOES NOT INCLUDE DAMBAR PROTRUSION. ALLOWABLE DAMBAR PROTRUSION SHALL BE 0.2 (0.005) TOTAL IN EXCESS OF THE D DIMENSION AT MAXIMUM MATERIAL CONDITION. MILLIMETERS INCHES R X 45 F DIM MIN MAX MIN MAX A B C D M J F G.2 BSC BSC J K M 0 0 P R SOLDERING FOOTPRINT* 4X 0.58 X.04 4X.52.2 PITCH DIMENSIONS: MILLIMETERS *For addiional informaion on our Pb Free sraegy and soldering deails, please download he ON Semiconducor Soldering and Mouning Techniques Reference Manual, SOLDERRM/D. hp://onsemi.com
8 PACKAGE DIMENSIONS TSSOP 4 CASE 948G 0 ISSUE B 0.5 (0.006) T 0.5 (0.006) T L 0.0 (0.004) T SEATING PLANE U U S 2X L/2 PIN IDENT. S D C 4 4X K REF 0.0 (0.004) M T U S S N (0.00) M B U A G H N J J F DETAIL E K K ÇÇÇ ÇÇÇ ÉÉÉ SECTION N N DETAIL E NOTES:. DIMENSIONING AND TOLERANCING PER ANSI Y4.5M, CONTROLLING DIMENSION: MILLIMETER. 3. DIMENSION A DOES NOT INCLUDE MOLD FLASH, PROTRUSIONS OR GATE BURRS. MOLD FLASH OR GATE BURRS SHALL NOT EXCEED 0.5 (0.006) PER SIDE. 4. DIMENSION B DOES NOT INCLUDE INTERLEAD FLASH OR PROTRUSION. INTERLEAD FLASH OR PROTRUSION SHALL NOT EXCEED 0.25 (0.00) PER SIDE. 5. DIMENSION K DOES NOT INCLUDE DAMBAR PROTRUSION. ALLOWABLE DAMBAR PROTRUSION SHALL BE 0.08 (0.003) TOTAL IN EXCESS OF THE K DIMENSION AT MAXIMUM MATERIAL CONDITION. 6. TERMINAL NUMBERS ARE SHOWN FOR REFERENCE ONLY.. DIMENSION A AND B ARE TO BE DETERMINED AT DATUM PLANE W. MILLIMETERS INCHES DIM MIN MAX MIN MAX A B C D F G 0.65 BSC BSC H J J W K K L 6.40 BSC BSC M SOLDERING FOOTPRINT* PITCH 4X X.26 DIMENSIONS: MILLIMETERS *For addiional informaion on our Pb Free sraegy and soldering deails, please download he ON Semiconducor Soldering and Mouning Techniques Reference Manual, SOLDERRM/D. hp://onsemi.com 8
9 PACKAGE DIMENSIONS SOEIAJ 4 CASE ISSUE A L E 4 8 Q E H E M L Z DETAIL P D IEW P e A c b A 0.3 (0.005) M 0.0 (0.004) NOTES: М. DIMENSIONING AND TOLERANCING PER ANSI Y4.5M, 982. М 2. CONTROLLING DIMENSION: MILLIMETER. М 3. DIMENSIONS D AND E DO NOT INCLUDE MOLD FLASH OR PROTRUSIONS AND ARE MEASURED AT THE PARTING LINE. MOLD FLASH OR PROTRUSIONS SHALL NOT EXCEED 0.5 (0.006) PER SIDE. М 4. TERMINAL NUMBERS ARE SHOWN FOR REFERENCE ONLY. М 5. THE LEAD WIDTH DIMENSION (b) DOES NOT INCLUDE DAMBAR PROTRUSION. ALLOWABLE DAMBAR PROTRUSION SHALL BE 0.08 (0.003) TOTAL IN EXCESS OF THE LEAD WIDTH DIMENSION AT MAXIMUM MATERIAL CONDITION. DAMBAR CANNOT BE LOCATED ON THE LOWER RADIUS OR THE FOOT. MINIMUM SPACE BETWEEN PROTRUSIONS AND ADJACENT LEAD TO BE 0.46 ( 0.08). MILLIMETERS INCHES DIM MIN MAX MIN MAX A A b c D E e.2 BSC BSC H E L E M Q Z ON Semiconducor and are regisered rademarks of Semiconducor Componens Indusries, LLC (SCILLC). SCILLC reserves he righ o make changes wihou furher noice o any producs herein. SCILLC makes no warrany, represenaion or guaranee regarding he suiabiliy of is producs for any paricular purpose, nor does SCILLC assume any liabiliy arising ou of he applicaion or use of any produc or circui, and specifically disclaims any and all liabiliy, including wihou limiaion special, consequenial or incidenal damages. Typical parameers which may be provided in SCILLC daa shees and/or specificaions can and do vary in differen applicaions and acual performance may vary over ime. All operaing parameers, including Typicals mus be validaed for each cusomer applicaion by cusomer s echnical expers. SCILLC does no convey any license under is paen righs nor he righs of ohers. SCILLC producs are no designed, inended, or auhorized for use as componens in sysems inended for surgical implan ino he body, or oher applicaions inended o suppor or susain life, or for any oher applicaion in which he failure of he SCILLC produc could creae a siuaion where personal injury or deah may occur. Should Buyer purchase or use SCILLC producs for any such uninended or unauhorized applicaion, Buyer shall indemnify and hold SCILLC and is officers, employees, subsidiaries, affiliaes, and disribuors harmless agains all claims, coss, damages, and expenses, and reasonable aorney fees arising ou of, direcly or indirecly, any claim of personal injury or deah associaed wih such uninended or unauhorized use, even if such claim alleges ha SCILLC was negligen regarding he design or manufacure of he par. SCILLC is an Equal Opporuniy/Affirmaive Acion Employer. This lieraure is subjec o all applicable copyrigh laws and is no for resale in any manner. PUBLICATION ORDERING INFORMATION LITERATURE FULFILLMENT: Lieraure Disribuion Cener for ON Semiconducor P.O. Box 563, Denver, Colorado 802 USA Phone: or Toll Free USA/Canada Fax: or Toll Free USA/Canada orderli@onsemi.com N. American Technical Suppor: Toll Free USA/Canada Europe, Middle Eas and Africa Technical Suppor: Phone: Japan Cusomer Focus Cener Phone: hp://onsemi.com 9 ON Semiconducor Websie: Order Lieraure: hp:// For addiional informaion, please conac your local Sales Represenaive MC4HC4A/D
MC74HC74A. Dual D Flip-Flop with Set and Reset. High Performance Silicon Gate CMOS
Dual D Flip-Flop wih Se and Rese High Performance Silicon Gae CMOS The MC4HC4A is idenical in pinou o he LS4. The device inpus are compaible wih sandard CMOS oupus; wih pullup resisors, hey are compaible
More informationMC74HC138A. 1 of 8 Decoder/ Demultiplexer. High Performance Silicon Gate CMOS
of 8 Decoder/ Demuliplexer High Performance Silicon Gae CMOS The is idenical in pinou o he LS8. The device inpus are compaible wih sandard CMOS oupus; wih pullup resisors, hey are compaible wih LSTTL oupus.
More informationMC74HC573A. Octal 3 State Noninverting Transparent Latch. High Performance Silicon Gate CMOS
Ocal 3 Sae Noninvering Transparen Lach High Performance Silicon Gae CMOS The MC74HC573A is idenical in pinou o he LS573. The devices are compaible wih sandard CMOS oupus; wih pullup resisors, hey are compaible
More informationMC74HC595A. 8-Bit Serial-Input/Serial or Parallel-Output Shift Register with Latched 3-State Outputs. High Performance Silicon Gate CMOS
8-Bi Serial-Inpu/Serial or Parallel-Oupu Shif Regiser wih Lached 3-Sae Oupus High Performance Silicon Gae COS The C74HC55A consiss of an 8 bi shif regiser and an 8 bi D ype lach wih hree sae parallel oupus.
More informationMC14008B. 4 Bit Full Adder
4 Bi Full Adder The MC4008B 4 bi full adder is consruced wih MOS P Channel and N Channel enhancemen mode devices in a single monolihic srucure. This device consiss of four full adders wih fas inernal look
More informationDisribued by: www.jameco.com -800-83-44 The conen and copyrighs of he aached maerial are he propery of is owner. Preferred Device Schoky Barrier Diodes These Schoky barrier diodes are designed for high
More informationMC14008B. 4-Bit Full Adder
4-Bi Full Adder The MC4008B 4 bi full adder is consruced wih MOS P Channel and N Channel enhancemen mode devices in a single monolihic srucure. This device consiss of four full adders wih fas inernal look
More informationMC14503B. Hex Non-Inverting 3-State Buffer
MC4503B Hex Non-Invering 3-Sae Buffer The MC4503B is a hex noninvering buffer wih 3sae oupus, and a high curren source and sink capabiliy. The 3sae oupus make i useful in common bussing applicaio. Two
More informationMC74HC165A. 8 Bit Serial or Parallel Input/ Serial Output Shift Register. High Performance Silicon Gate CMOS
MC74CA 8 Bi Serial or Parallel Inpu/ Serial Oupu Shif Regiser igh Performance Silicon Gae CMOS The MC74CA is idenical in pinou o he S. The device inpus are compaible wih sandard CMOS oupus; wih pullup
More informationMC74HC139A. Dual 1 of 4 Decoder/ Demultiplexer. High Performance Silicon Gate CMOS
MC74HC39A Dual of 4 Decoder/ Demultiplexer High Performance Silicon Gate CMOS The MC74HC39A is identical in pinout to the LS39. The device inputs are compatible with standard CMOS outputs; with pull up
More informationD44VH10 (NPN), D45VH10 (PNP) Complementary Silicon Power Transistors 15 A COMPLEMENTARY SILICON POWER TRANSISTORS 80 V, 83 W
DH (NPN), D5H (PNP) Complemenary Silicon Power Transisors These complemenary silicon power ransisors are designed for highspeed swiching applicaions, such as swiching regulaors and high frequency inverers.
More informationMC14175BDR2G. Quad Type D Flip Flop
MC475B Quad Type D FlipFlop The MC475B quad ype D flipflop is coruced wih MOS Pchannel and Nchannel enhancemen mode devices in a single monolihic srucure. Each of he four flipflops is posiiveedge riggered
More informationMC74HC138A. 1-of-8 Decoder/ Demultiplexer. High Performance Silicon Gate CMOS
MC74HC38A -of-8 Decoder/ Demultiplexer High Performance Silicon Gate CMOS The MC74HC38A is identical in pinout to the LS38. The device inputs are compatible with standard CMOS outputs; with pullup resistors,
More informationMC14175BFELG. Quad Type D Flip Flop
MC475B Quad Type D FlipFlop The MC475B quad ype D flipflop is coruced wih MOS Pchannel and Nchannel enhancemen mode devices in a single monolihic srucure. Each of he four flipflops is posiiveedge riggered
More informationMC74HC244A Octal 3 State Noninverting Buffer/Line Driver/ Line Receiver
Ocal Sae Noninvering uffer/line Driver/ Line Receiver High Performance Silicon Gae COS The C74HC244 is idenical in pinou o he LS244. The device inpus are compaible wih sandard COS oupus; wih pullup resisors,
More informationMC14027B. MARKING DIAGRAMS. MAXIMUM RATINGS (Voltages Referenced to V SS ) (Note 2.) ORDERING INFORMATION PDIP 16 P SUFFIX CASE 648
The MC14027B dual J K flip flop has independen J, K, Clock (C), Se (S) and Rese (R) inpus for each flip flop. These devices may be used in conrol, regiser, or oggle funcions. Diode Proecion on All Inpus
More informationMC14174B/D. Hex Type D Flip-Flop
MC474B Hex Type D Flip-Flop The MC474B hex ype D flipflop is coruced wih MOS Pchannel and Nchannel enhancemen mode devices in a single monolihic srucure. Daa on he D inpus which mees he seup ime requiremens
More informationMC74HC244A Octal 3 State Noninverting Buffer/Line Driver/ Line Receiver
Octal 3 State Noninverting Buffer/Line Driver/ Line Receiver High Performance Silicon Gate CMOS The MC74HC244A is identical in pinout to the LS244. The device inputs are compatible with standard CMOS outputs;
More informationMC74HC273A. Octal D Flip Flop with Common Clock and Reset. High Performance Silicon Gate CMOS
M74H273A Ocal D Flip Flop wih ommon lock and Rese High Performance Silicon Gae MOS The M74H273A is idenical in pinou o he LS273. The device inpus are compaible wih sandard MOS oupus; wih pullup resisors,
More information74HC74. Dual D Flip Flop with Set and Reset. High Performance Silicon Gate CMOS
Dual D Flip Flop with Set and Reset High Performance Silicon Gate CMOS The 4HC4 is identical in pinout to the LS4. The device inputs are compatible with standard CMOS outputs; with pullup resistors, they
More informationMC14043B, MC14044B CMOS MSI. Quad R S Latches
MC44B, MC444B CMOS MSI Quad RS Laches The MC44B and MC444B quad RS laches are coruced wih MOS PChannel and NChannel enhancemen mode devices in a single monolihic srucure. Each lach has an independen Q
More information74HC of 8 Decoder/ Demultiplexer. High Performance Silicon Gate CMOS
of 8 Decoder/ Demultiplexer High Performance Silicon Gate CMOS The 74HC38 is identical in pinout to the LS38. The device inputs are compatible with standard CMOS outputs; with pullup resistors, they are
More informationMC14007UBF. MARKING DIAGRAMS. MAXIMUM RATINGS (Voltages Referenced to V SS ) (Note 2.) ORDERING INFORMATION
The MC007UB muli purpose device consiss of hree N channel and hree P channel enhancemen mode devices packaged o provide access o each device. These versaile pars are useful in inverer circuis, pulse shapers,
More informationMC14029B. Binary/Decade Up/Down Counter
MC4029B Binary/Decade Up/Down Couner The MC4029B Binary/Decade up/down couner is coruced wih MOS P channel and N channel enhancemen mode devices in a single monolihic srucure. The couner coiss of ype D
More information74HC74. Dual D Flip Flop with Set and Reset. High Performance Silicon Gate CMOS
Dual D Flip Flop with Set and Reset High Performance Silicon Gate CMOS The 74HC74 is identical in pinout to the LS74. The device inputs are compatible with standard CMOS outputs; with pullup resistors,
More informationMC74VHC244. Octal Bus Buffer
Ocal Bus Buffer The MC74HC244 is an advanced high speed CMOS ocal bus buffer fabricaed wih silicon gae CMOS echnology. The MC74HC244 is a noninvering 3 sae buffer, and has wo acive low oupu enables. This
More information74HC86. Quad 2 Input Exclusive OR Gate. High Performance Silicon Gate CMOS
Quad 2 Input Exclusive OR Gate MARKING DIAGRAMS High Performance Silicon Gate CMOS The is identical in pinout to the LS86. The device inputs are compatible with standard CMOS outputs; with pullup resistors,
More informationPIN ASSIGNMENT LOGI DIAGRAM LOK a RESET a a 2 a LOK b RESET b b LOK, 3 BINARY OUNTER 3, 4, 0 5, 9 6, a 4 a b 3 b RESET
Dual 4 Sage Binary Ripple ouner High Performance Silicon Gae MOS The M74H393A is idenical in pinou o he LS393. The device inpus are compaible wih sandard MOS oupus; wih pullup resisors, hey are compaible
More informationMC74HC573A. Octal 3-State Noninverting Transparent Latch. High Performance Silicon Gate CMOS
Ocal 3-Sae Noninvering Transparen Lach High Performance Silicon Gae CMOS The MC74HC573 is idenical in pinou o he LS573. The devices are compaible wih sandard CMOS oupus; wih pullup resisors, hey are compaible
More informationMC14042B. MARKING DIAGRAMS. MAXIMUM RATINGS (Voltages Referenced to V SS ) (Note 2.) ORDERING INFORMATION PDIP 16 P SUFFIX CASE 648
The MC14042B Quad Traparen Lach is coruced wih MOS P channel and N channel enhancemen mode devices in a single monolihic srucure. Each lach has a separae daa inpu, bu all four laches share a common clock.
More informationMC74HC132A. Quad 2 Input NAND Gate with Schmitt Trigger Inputs. High Performance Silicon Gate CMOS
Quad 2 Input NAND Gate with Schmitt Trigger Inputs High Performance Silicon Gate CMOS The is identical in pinout to the LS32. The device inputs are compatible with standard CMOS outputs; with pull up resistors,
More informationMC74HC573A. Octal 3-State Noninverting Transparent Latch. High Performance Silicon Gate CMOS
Ocal 3-Sae Noninvering Traparen Lach High Performance Silicon Gae COS The C74HC573 is idenical in pinou o he LS573. The devices are compaible wih sandard COS oupus; wih pullup resisors, hey are compaible
More informationMC14043B, MC14044B CMOS MSI. Quad R S Latches
MC44B, MC444B CMOS MSI Quad RS Laches The MC44B and MC444B quad RS laches are coruced wih MOS PChannel and NChannel enhancemen mode devices in a single monolihic srucure. Each lach has an independen Q
More informationMC74HCT138A. 1 of 8 Decoder/ Demultiplexer with LSTTL Compatible Inputs. High Performance Silicon Gate CMOS
of 8 Decoder/ Demultiplexer with LSTTL Compatible Inputs High Performance Silicon Gate CMOS The MC74HCT38A is identical in pinout to the LS38. The HCT38A may be used as a level converter for interfacing
More informationMC74HC393A. Dual 4-Stage Binary Ripple Counter. High Performance Silicon Gate CMOS
Dual 4-Sage Binary Ripple ouner High Performance Silicon Gae MOS The M74H393A is idenical in pinou o he LS393. The device inpus are compaible wih sandard MOS oupus; wih pullup resisors, hey are compaible
More information74HC244 Octal 3 State Noninverting Buffer/Line Driver/ Line Receiver
Octal 3 State Noninverting Buffer/Line Driver/ Line Receiver High Performance Silicon Gate CMOS The is identical in pinout to the LS244. The device inputs are compatible with standard CMOS outputs; with
More informationMC74AC132, MC74ACT132. Quad 2 Input NAND Schmitt Trigger
MC74AC32, MC74ACT32 Quad 2 Input NAND Schmitt Trigger The MC74AC/74ACT32 contains four 2 input NAND gates which are capable of transforming slowly changing input signals into sharply defined, jitter free
More informationMC74AC74, MC74ACT74. Dual D Type Positive Edge Triggered Flip Flop
Dual D Type Positive Edge Triggered Flip Flop The MC74AC74/74ACT74 is a dual D type flip flop with Asynchronous Clear and Set inputs and complementary (Q,Q) outputs. Information at the input is traferred
More information74HCT245. Octal 3-State Noninverting Bus Transceiver with LSTTL-Compatible Inputs. High-Performance Silicon-Gate CMOS
Octal 3-State Noninverting Bus Transceiver with LSTTL-Compatible Inputs High-Performance Silicon-Gate CMOS The 74HCT245 is identical in pinout to LS245. The device has TTL-Compatible Inputs. The HCT245
More informationMC74VHC132. Quad 2 Input NAND Schmitt Trigger
MC74HC32 Quad 2 Input NAND Schmitt Trigger The MC74HC32 is an advanced high speed CMOS Schmitt NAND trigger fabricated with silicon gate CMOS technology. It achieves high speed operation similar to equivalent
More informationMC74HCT573A/D. Octal 3-State Noninverting Transparent Latch with LSTTL Compatible Inputs. High Performance Silicon Gate CMOS
Octal 3-State Noninverting Transparent Latch with LSTTL Compatible Inputs High Performance Silicon Gate CMOS The MC74HCT573A is identical in pinout to the LS573. This device may be used as a level converter
More informationMC74HC86A. Quad 2 Input Exclusive OR Gate. High Performance Silicon Gate CMOS
Quad 2 Input Exclusive OR Gate High Performance Silicon Gate CMOS The MC4HC86A is identical in pinout to the S86. The device inputs are compatible with standard CMOS outputs; with pullup resistors, they
More informationMC14099B. 8 Bit Addressable Latches
MC0B Bi ddressable Laches The MC0B is an bi addressable lach. Daa is enered in serial form when he appropriae lach is addressed (via address pi 0,, ) and wrie disable is in he low sae. For he MC0B he inpu
More informationMC74AC109, MC74ACT109. Dual JK Positive Edge Triggered Flip Flop
MC9, MC9 Dual JK Positive EdgeTriggered FlipFlop The MC9/9 coists of two highspeed completely independent traition clocked JK flipflops. The clocking operation is independent of rise and fall times of
More informationMC74HCT373A/D. Octal 3-State Noninverting Transparent Latch with LSTTL-Compatible Inputs. High Performance Silicon Gate CMOS
Ocal -Sae Noninvering Traparen Lach wih LSTTL-Compaible Inpus High Performance Silicon Gae CMOS The MC7HCT7A may be used as a level converer for inerfacing TTL or NMOS oupus o High Speed CMOS inpus. The
More informationMC14174B/D. Hex Type D Flip Flop
7B Hex Type D FlipFlop The 7B hex ype D flipflop is coruced wih OS Pchannel and Nchannel enhancemen mode devices in a single monolihic srucure. Daa on he D inpus which mees he seup ime requireme is raferred
More informationQuad 2-Input OR Gate High-Performance Silicon-Gate CMOS
TECNICAL DATA Quad 2-Inpu OR ae igh-performance Silicon-ae CMOS The is idenical in pinou o he LS/ALS32. The device inpus are compaible wih sandard CMOS oupus; wih pullup resisors, hey are compaible wih
More informationMC74VHC14. Hex Schmitt Inverter
MC74HC4 Hex Schmitt Inverter The MC74HC4 is an advanced high speed CMOS Schmitt inverter fabricated with silicon gate CMOS technology. It achieves high speed operation similar to equivalent Bipolar Schottky
More informationMC74VHC257. Quad 2-Channel Multiplexer with 3-State Outputs
MC74HC257 Quad 2-Channel Muliplexer wih 3-ae Oupus The MC74HC257 is an advanced high speed CMO quad 2 channel muliplexer fabricaed wih silicon gae CMO echnology. I achieves high speed operaion similar
More informationMJE18006G SWITCHMODE. NPN Bipolar Power Transistor For Switching Power Supply Applications POWER TRANSISTOR 6.0 AMPERES 1000 VOLTS 100 WATTS
SWITCHMODE NPN Bipolar Power Transisor For Swiching Power Supply Applicaions The has an applicaions specific saeofhear die designed for use in V lineoperaed SWITCHMODE Power supplies and elecronic ligh
More informationMC74AC138, MC74ACT of 8 Decoder/Demultiplexer
1 of 8 Decoder/Demultiplexer The MC74AC138/74ACT138 is a high speed 1 of 8 decoder/demultiplexer. This device is ideally suited for high speed bipolar memory chip select address decoding. The multiple
More informationMC14584B. Hex Schmitt Trigger
MC4584B Hex Schmitt Trigger The MC4584B Hex Schmitt Trigger is constructed with MOS Pchannel and Nchannel enhancement mode devices in a single monolithic structure. These devices find primary use where
More informationMC14027B. Dual J K Flip Flop
M4027B Dual Flip Flop The M4027B dual flip flop has independen,, lock (), Se (S) and Rese (R) inpus for each flip flop. These devices may be used in conrol, regiser, or oggle funcio. Feaures Diode Proecion
More informationMC14049B, MC14050B. Hex Buffer
MC404B, MC4050B Hex Buffer The MC404B Hex Inverter/Buffer and MC4050B Noninverting Hex Buffer are constructed with MOS PChannel and NChannel enhancement mode devices in a single monolithic structure. These
More informationMC74HC244A. Octal 3-State Noninverting Buffer/Line Driver/ Line Receiver. High Performance Silicon Gate CMOS
Octal 3-State Noninverting Buffer/Line Driver/ Line Receiver High Performance Silicon Gate CMOS The MC74HC244A is identical in pinout to the LS244. The device inputs are compatible with standard CMOS outputs;
More information74HC245. Octal 3 State Noninverting Bus Transceiver. High Performance Silicon Gate CMOS
Octal 3 State Noninverting Bus Traceiver High Performance Silicon Gate CMOS The 74HC245 is identical in pinout to the LS245. The device inputs are compatible with standard CMOS outputs; with pull up resistors,
More informationMC74LCX74. Low-Voltage CMOS Dual D-Type Flip-Flop. With 5 V Tolerant Inputs
Low-oltage CMOS Dual D-Type Flip-Flop With 5 Tolerant Inputs The MC74LCX74 is a high performance, dual D type flip flop with asynchronous clear and set inputs and complementary (O, O) outputs. It operates
More informationMJE5740, MJE5742. NPN Silicon Power Darlington Transistors POWER DARLINGTON TRANSISTORS 8 AMPERES VOLTS 80 WATTS
is a Preferred Device NPN Silicon Power Darlingon Transisors The and Darlingon ransisors are designed for highvolage power swiching in inducive circuis. Feaures PbFree Packages are Available* Applicaions
More informationSN74LS145MEL. 1 of 10 Decoder/Driver Open Collector LOW POWER SCHOTTKY
of 0 Decoder/Driver Open Collector The SN74LS45, -of-0 Decoder/Driver, is designed to accept BCD inputs and provide appropriate outputs to drive 0-digit incandescent displays. All outputs remain off for
More informationMJE5740G, MJE5742G. NPN Silicon Power Darlington Transistors POWER DARLINGTON TRANSISTORS 8 AMPERES VOLTS 80 WATTS
MJE74G, MJE74G NPN Silicon Power Darlingon Transisors The MJE74G and MJE74G Darlingon ransisors are designed for highvolage power swiching in inducive circuis. Feaures These Devices are PbFree and are
More informationSN74LS157MEL. Quad 2 Input Multiplexer LOW POWER SCHOTTKY
Quad 2 Input Multiplexer The LSTTL/ MSI is a high speed Quad 2-Input Multiplexer. Four bits of data from two sources can be selected using the common Select and Enable inputs. The four buffered outputs
More informationSN74LS132MEL. Quad 2 Input Schmitt Trigger NAND Gate LOW POWER SCHOTTKY
Quad 2 Input Schmitt Trigger NAND Gate The SN74LS32 contains four 2-Input NAND Gates which accept standard TTL input signals and provide standard TTL output levels. They are capable of transforming slowly
More informationMC14020B. 14 Bit Binary Counter
M4020B 4Bi Binary ouner The M4020B 4sage binary couner is coruced wih MOS Phannel and Nhannel enhancemen mode devices in a single monolihic srucure. This par is designed wih an inpu wave shaping circui
More informationHigh Performance Silicon Gate CMOS
High Performance Silicon Gae MOS The M7H7A is idenical in pinou o he LS7. The device inpus are compaible wih sandard MOS oupus; wih pull up resisors, hey are compaible wih LSTTL oupus. This device coiss
More informationFST Bit Bus Switch
FST32 4-Bit Bus Switch The ON Semiconductor FST32 is a quad, high performance switch. The device is CMOS TTL compatible when operating between 4 and. Volts. The device exhibits extremely low R ON and adds
More informationMC14049B, MC14050B. Hex Buffer
MC4049B, MC4050B Hex Buffer The MC4049B Hex Inverter/Buffer and MC4050B Noninverting Hex Buffer are constructed with MOS PChannel and NChannel enhancement mode devices in a single monolithic structure.
More informationNE522 High Speed Dual Differential Comparator/Sense Amp
HighSpeed DualDifferential Comparator/Sense Amp Features 5 ns Maximum Guaranteed Propagation Delay 0 A Maximum Input Bias Current TTL-Compatible Strobes and Outputs Large Common-Mode Input oltage Range
More informationMC74HC4094A. 8-Bit Shift and Store Register. High Performance Silicon Gate CMOS
8-Bit Shift and Store Register High Performance Silicon Gate CMOS The MC74HC4094A is a high speed CMOS 8 bit serial shift and storage register. This device consists of an 8 bit shift register and latch
More information74FST Bit Bus Switch
4FST32 4 Bit Bus Switch The ON Semiconductor 4FST32 is a quad, high performance switch. The device is CMOS TTL compatible when operating between 4 and. Volts. The device exhibits extremely low R ON and
More informationMC74LV594A. 8-Bit Shift Register with Output Register
8-Bit Shift Register with Output Register The MC74LV594A is an 8 bit shift register designed for 2 V to 6.0 V V CC operation. The device contain an 8 bit serial in, parallel out shift register that feeds
More informationIs Now Part of To learn more about ON Semiconductor, please visit our website at
Is Now Par of To learn more abou ON Semiconducor, please visi our websie a www.onsemi.com ON Semiconducor and he ON Semiconducor logo are rademarks of Semiconducor Componens Indusries, LLC dba ON Semiconducor
More informationMC74VHC245. Octal Bus Buffer/Line Driver
MC74HC245 Octal Bus Buffer/Line Driver The MC74HC245 is an advanced high speed CMOS octal bus transceiver fabricated with silicon gate CMOS technology. It achieves high speed operation similar to equivalent
More informationMC Bit Magnitude Comparator
Bit Magnitude Comparator The MC0 is a high speed expandable bit comparator for comparing the magnitude of two binary words. Two outputs are provided: and. A = B can be obtained by NORing the two outputs
More informationSN74LS151MEL. 8 Input Multiplexer LOW POWER SCHOTTKY
8 Input Multiplexer The TTL/MSI SN74LS5 is a high speed 8-input Digital Multiplexer. It provides, in one package, the ability to select one bit of data from up to eight sources. The LS5 can be used as
More informationMC74ACT Input Universal Shift/Storage Register with Synchronous Reset and Common I/O Pins
8 Input Universal Shift/Storage Register with Synchronous Reset and Common I/O Pins The MC74ACT323 is an 8-bit universal shift/storage register with3-state outputs. Its function is similar to the MC74ACT299
More informationMC74AC259, MC74ACT Bit Addressable Latch
8 Bit Addressable Latch The MC74AC259/74ACT259 is a high speed 8 bit addressable latch designed for general purpose storage applicatio in digital systems. It is a multifunctional device capable of storing
More informationMC14040B. 12-Bit Binary Counter
M4040B 2Bi Binary ouner The M4040B 2sage binary couner is coruced wih MOS Phannel and Nhannel enhancemen mode devices in a single monolihic srucure. This par is designed wih an inpu wave shaping circui
More informationNLSV2T Bit Dual-Supply Inverting Level Translator
2-Bit Dual-Supply Inverting Level Translator The NLSV2T240 is a 2 bit configurable dual supply voltage level translator. The input A n and output B n ports are designed to track two different power supply
More informationHigh Performance Silicon Gate CMOS
High Performance Silicon Gae MOS The M74H574A is idenical in pinou o he LS574. The device inpus are compaible wih sandard MOS oupus; wih pull up resisors, hey are compaible wih LSTTL oupus. aa meeing he
More informationNDS9952A Dual N & P-Channel Enhancement Mode Field Effect Transistor
NS99A ual N & P-Channel Enhancemen Mode Field Effec Transisor General escripion Feaures These dual N- and P-channel enhancemen mode power field effec ransisors are produced using ON Semiconducors proprieary,
More information74HC00. Quad 2-Input NAND Gate. High-Performance Silicon-Gate CMOS
74C00 Quad 2-Input NAND Gate igh-performance Silicon-Gate CMOS The 74C00 is identical in pinout to the S00. The device inputs are compatible with Standard CMOS outputs; with pullup resistors, they are
More informationMC74HC390. Dual 4 Stage Binary Ripple Counter with 2 and 5 Sections. High Performance Silicon Gate CMOS
Dual 4Sage Binary Ripple ouner wih 2 and 5 Secions HighPerformance Siliconae OS The 54/74H30 is idenical in pinou o he LS30. The device inpus are compaible wih sandard OS oupus; wih pullup resisors, hey
More information74HCT32. Quad 2 Input OR Gate with LSTTL Compatible Inputs. High Performance Silicon Gate CMOS
Quad 2 Input OR Gate with STT Compatible Inputs igh Performance Silicon Gate CMOS The 74CT32 is identical in pinout to the S32. The device has TT compatible inputs. Features Output Drive Capability: 0
More informationNLSV22T244. Dual 2-Bit Dual-Supply Non-Inverting Level Translator
Dual 2-Bit Dual-Supply Non-Inverting Level Translator The NLSV22T244 is a dual 2 bit configurable dual supply bus buffer level translator. The input ports A and the output ports B are designed to track
More information74FST Bit, 4 Port Bus Exchange Switch
4 Bit, 4 Port Bus Exchange Switch The ON Semiconductor 74FST3400 is a 4 bit, 4 port bus exchange switch. The device is CMOS TTL compatible when operating between 4.0 and 5.5 Volts. The device exhibits
More information1.3 A, 20 V. R DS(ON) = 25 C unless otherwise noted. Symbol Parameter NDS331N Units V DSS. Drain-Source Voltage 20 V V GSS
NSN N-Channel Logic Level Enhancemen Mode Field Effec Transisor General escripion Feaures These N-Channel logic level enhancemen mode power field effec ransisors are produced using ON Semiconducor's proprieary,
More informationLOW POWER SCHOTTKY. GUARANTEED OPERATING RANGES ORDERING INFORMATION PLASTIC N SUFFIX CASE 648
The SN74LS194A is a High Speed 4-Bit Bidirectional Universal Shift Register. As a high speed multifunctional sequential building block, it is useful in a wide variety of applications. It may be used in
More informationMC74HC373A. Octal 3 State Non Inverting Transparent Latch. High Performance Silicon Gate CMOS
Octal 3 State Non Inverting Transparent Latch High Performance Silicon Gate CMOS The MC74HC373A is identical in pinout to the LS373. The device inputs are compatible with standard CMOS outputs; with pullup
More informationSN74LS175MEL. Quad D Flip Flop LOW POWER SCHOTTKY
uad Flip Flop The LSTTL/MSI SN74LS75 is a high speed uad Flip-Flop. The device is useful for general flip-flop requirements where clock and clear inputs are common. The information on the inputs is stored
More informationSN74LS373, SN74LS374. Octal Transparent Latch with 3 State Outputs; Octal D Type Flip Flop with 3 State Output LOW POWER SCHOTTKY
Octal Transparent Latch with 3 State Outputs; Octal Type Flip Flop with 3 State Output The SN74LS373 consists of eight latches with 3-state outputs for bus organized system applications. The flip-flops
More informationMC14015B. Dual 4 Bit Static Shift Register
M0B Dual Bi Saic Shif egiser The M0B dual bi saic shif regiser is coruced wih MOS Phannel and Nhannel enhancemen mode devices in a single monolihic srucure. I coiss of wo idenical, independen sae serialinpu/paralleloupu
More information74HC32. Quad 2 Input OR Gate. High Performance Silicon Gate CMOS
Quad 2 Input OR Gate igh Performance Silicon Gate CMOS The is identical in pinout to the S32. The device inputs are compatible with Standard CMOS outputs; with pullup resistors, they are compatible with
More informationLOW POWER SCHOTTKY. ESD > 3500 Volts. GUARANTEED OPERATING RANGES ORDERING INFORMATION V CC 8 7 GND
ESD > 3500 Volts V CC 8 4 3 2 0 9 LOW POWER SCHOTTKY 2 3 4 5 6 7 GND GUARANTEED OPERATING RANGES Symbol Parameter Min Typ Max Unit V CC Supply Voltage 4.75 5.0 5.25 V T A Operating Ambient Temperature
More informationSN74LS125A, SN74LS126A. Quad 3 State Buffers LOW POWER SCHOTTKY. LS125A LS126A TRUTH TABLES ORDERING INFORMATION
Quad 3 State Buffers V CC E D O E D O 4 3 2 0 9 8 LOW POWER SCHOTTKY 2 3 4 5 6 E D O E D O LS25A GND V CC E D O E D O 4 3 2 0 9 8 4 PLASTIC N SUFFIX CASE 646 LS25A INPUTS 2 3 4 5 6 E D O E LS26A D O GND
More informationHigh Performance Silicon Gate CMOS
High Performance Silicon Gate CMOS The MC74HCT14A may be used as a level converter for interfacing TTL or NMOS outputs to high speed CMOS inputs. The HCT14A is identical in pinout to the LS14. The HCT14A
More informationMC74VHC1GT125. Noninverting Buffer / CMOS Logic Level Shifter with LSTTL Compatible Inputs
C74CGT Noninvering Buffer / COS ogic evel Shifer wih STT Compaible Inpus The C74CGT is a single gae noninvering buffer fabricaed wih silicon gae COS echnology. I achieves high speed operaion similar o
More informationMC74AC74, MC74ACT74. Dual D Type Positive Edge Triggered Flip Flop
Dual D Type Positive Edge Triggered Flip Flop The MC74/T74 is a dual D type flip flop with Asynchronous Clear and Set inputs and complementary (Q,Q) outputs. Information at the input is traferred to the
More informationMC74AC161, MC74ACT161, MC74AC163, MC74ACT163. Synchronous Presettable Binary Counter
MC74AC161, MC74ACT161, MC74AC163, MC74ACT163 Synchronous Presettable Binary Counter The MC74AC161/74ACT161 and MC74AC163/74ACT163 are high speed synchronous modulo 16 binary counters. They are synchronously
More informationPart Ordering code Marking Remarks 1N4148W-V 1N4148W-V-GS18 or 1N4148W-V-GS08 A2 Tape and Reel
Small Signal Fas Swiching Diode Feaures These diodes are also available in oher case syles including he DO- case wih he ype designaion N8, he MiniMELF case wih he ype designaion LL8, and he SOT- case wih
More informationSN74LS147, SN74LS Line to 4 Line and 8 Line to 3 Line Priority Encoders LOW POWER SCHOTTKY
0 Line to Line and 8 Line to 3 Line Priority Encoders The SN7LS7 and the SN7LS8 are Priority Encoders. They provide priority decoding of the inputs to eure that only the highest order data line is encoded.
More information