DG411CY. Pin Configurations/Functional Diagrams/Truth Tables IN2 DG412 IN3 DIP/SO/TSSOP DG412 LOGIC SWITCH OFF SWITCHES SHOWN FOR LOGIC 0 INPUT
|
|
- Lizbeth Melton
- 5 years ago
- Views:
Transcription
1 9-728; Rev ; 9/0 Improved, Quad, General escription Maxim s redesigned analog switches now feature low on-resistance matching between switches (Ω max) and guaranteed on-resistance flatness over the signal range ( Ω max). These low on-resistance switches conduct equally well in either direction. They guarantee low charge injection, low power consumption, and an E tolerance of 2000V minimum per Method 0.7. The new design offers lower off leakage current over temperature (less than na at +8 ). The are quad, single-pole/single-throw (PT) analog switches. The G is normally closed (N), and the G2 is normally open (NO). The G has two N switches and two NO switches. witching times are less than 0ns max for t ON and less than 00ns max for t. These devices operate from a single +0V to +0V supply, or bipolar ±.V to ±20V supplies. Maxim s improved are fabricated with a V silicongate process. Applications ample-and-hold ircuits Test Equipment Heads-Up isplays Guidance & ontrol ystems Military Radios ommunication ystems Battery-Operated ystems PBX, PABX Audio ignal Routing New Features Plug-In Upgrade for Industry-tandard Improved r(on) Match Between hannels (Ω max) Guaranteed r FLAT(ON) Over ignal Range ( Ω) Improved harge Injection (0p max) Improved Off Leakage urrent Over Temperature (<na at +8 ) Withstand Electrostatic ischarge (2000V min) per Method 0.7 Existing Features Low r(on) (Ω max) ingle-upply Operation +0V to +0V Bipolar-upply Operation ±.V to ±20V Low Power onsumption (µw max) Rail-to-Rail ignal Handling TTL/MO-Logic ompatible Ordering Information Pin onfigurations/functional iagrams/truth Tables PART GJ GUE GY TEMP. RANGE 0 to to to +70 P-PAKAGE Plastic IP TOP Narrow O G/ 0 to +70 ice* Ordering Information continued at end of data sheet. *ontact factory for dice specifications. TOP VIEW G 2 G2 2 G IP/O/TOP G LOGI WITH 0 ON Pin onfigurations continued at end of data sheet. IP/O/TOP G2 LOGI WITH 0 ON WITHE HOWN FOR LOGI 0 PUT IP/O/TOP G LOGI WITHE, WITHE 2, 0 ON ON Maxim Integrated Products For pricing, delivery, and ordering information, please contact Maxim/allas irect! at , or visit Maxim s website at
2 ABOLUTE MAXIMUM RATG Voltage Referenced to...v...2v...( -0.V) to ( +0.V) igital Inputs, V, V (Note )...( -2V) to ( +2V) or 0mA (whichever occurs first) ontinuous urrent (any terminal)...0ma Peak urrent (pulsed at ms, 0% duty cycle max)...00ma ontinuous Power issipation (T A = +70 ) -Pin Plastic IP (derate 0.mW/ above +70 ).82mW -Pin Narrow O (derate 8.70mW/ above +70 )...9mW -Pin ERIP (derate 0.00mW/ above +70 )...800mW -Pin TOP (derate.7mw/ above +70 )...7mW -Pin QFN (derate 9.2mW/ above +70 )...8mW Operating Temperature Ranges G...0 to +70 G...-0 to +8 G_AK_...- to +2 torage Temperature Range...- to +0 Lead Temperature (soldering, 0sec) Note : ignals on,, or exceeding or are clamped by internal diodes. Limit forward current to maximum current rating. tresses beyond those listed under Absolute Maximum Ratings may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated in the operational sections of the specifications is not implied. Exposure to absolute maximum rating conditions for extended periods may affect device reliability. ELETRIAL HARATERITI ual upplies ( = V, = -V, = V, = 0V, V H = 2.V, V L = 0.8V,, unless otherwise noted.) PARAMETER WITH Analog ignal Range rain-ource On-Resistance On-Resistance Match Between hannels (Note ) On-Resistance Flatness (Note ) YMBOL V ANALOG r (ON) r (ON) r FLAT(ON) (Note ) =.V, = -.V, V = ±8.V, I = -0mA = V, = -V, V = ±0V, I = -0mA = V, = -V, V = ±V, 0V, I = -0mA ONITION, A M TYP MAX (Note 2) UNIT V Ω Ω Ω ource-off Leakage urrent (Note 7) rain-off Leakage urrent (Note 7) rain-on Leakage urrent (Note 7) I () I () I (ON) + I (ON) =.V, = -.V, V = ±.V, V =.V =.V, = -.V, V = ±.V, V =.V =.V, = -.V, V = ±.V, V =.V ± ± ± T A = T M to T MAX T A = T M to T MAX T A = T M to T MAX,, A, A,, A, A,, A, A na na na 2
3 ELETRIAL HARATERITI ual upplies (continued) ( = V, = -V, = V, = 0V, V H = 2.V, V L = 0.8V,, unless otherwise noted.) PUT Input urrent with Input Voltage High Input urrent with Input Voltage Low UPPLY Power-upply Range Positive upply urrent Negative upply urrent Logic upply urrent Ground urrent YNAMI Turn-On Time Turn-Off Time PARAMETER Break-Before-Make Time elay harge Injection (Note ) Off Isolation (Note ) rosstalk (Note ) YMBOL I H I L I+ I- I L I t ON t t Q OIRR ONITION = 2.V, all others = 0.8V = 0.8V, all others = 2.V =.V, = -.V, =.V, = -.V, =.V, = -.V, =.V, = -.V, V = ±0V, Figure 2 V = ±0V, Figure 2 G only, R L = 00Ω, L = pf, Figure L =.0nF, V GEN = 0V, R GEN = 0Ω, Figure R L = 0Ω, L = pf, f = MHz, Figure R L = 0Ω, L = pf, f = MHz, Figure M TYP MAX (Note 2) ±. ± UNIT V ns ns ns p db db ource-off apacitance () f = MHz, Figure 7 9 pf rain-off apacitance () f = MHz, Figure 7 9 pf rain-on apacitance (ON) + (ON) f = MHz, Figure 8 pf
4 ELETRIAL HARATERITI ingle upply ( = 2V, = 0V, = V, = 0V, V H = 2.V, V L = 0.8V,, unless otherwise noted.) WITH Analog ignal Range rain-ource On Resistance UPPLY PARAMETER Positive upply urrent Negative upply urrent Logic upply urrent YMBOL V ANALOG r (ON) I+ I- I L (Note ) = 0.8V, V =.8V, I = -0mA =.2V, =.2V, =.2V, ONITION T A = T MAX T A = T MAX T A = T MAX M TYP MAX (Note 2) UNIT V Ω Ground urrent I =.2V, T A = T MAX YNAMI Turn-On Time Turn-Off Time t ON t V = 8V, Figure 2 V = 8V, Figure ns ns Break-Before-Make Time elay harge Injection (Note ) t Q G only, R L = 00Ω, L = pf, Figure L =.0nF, V GEN = 0V, R GEN = 0V, Figure 0 Note 2: The algebraic convention, where the most negative value is a minimum and the most positive value a maximum, is used in this data sheet. Note : Guaranteed by design. Note : R ON = R ON max - R ON min. On-resistance match between channels and flatness are guaranteed only with bipolar-supply operation. Flatness is defined as the difference between the maximum and minimum value of on resistance as measured at the extremes of the specified analog signal range. Note : Off Isolation = 20 log (V / V ), V = output, V = input to off switch. ee Figure. Note : Between any two switches. ee Figure. Note 7: Leakage parameters I (), I (), and I (ON) are 00% tested at the maximum rated hot temperature and guaranteed by correlation at ns p
5 Typical Operating haracteristics (, unless otherwise noted.) r(on) (Ω) r(on) (Ω) ON-REITANE vs. V AN POWER-UPPLY VOLTAGE A: = V, = -V B: = 0V, = -0V : = V, = -V : = 20V, = -20V = 2V = 0V V (V) A ON-REITANE vs. V (GLE UPPLY) B T A = +2 T A = +8 G-0 G-0 r(on) (Ω) LEAKAGE (na) = V = -V ON-REITANE vs. V AN TEMPERATURE T A = +2 T A = +8 T A = V (V) LEAKAGE URRENT vs. TEMPERATURE =.V = -.V V = ±V V = V ± G-02 G-0 r(on) (Ω) ON LEAKAGE (na) ON-REITANE vs. V AN TEMPERATURE (GLE UPPLY) = 0V = V = 0V = V = 20V V (V) ON LEAKAGE URRENT vs. TEMPERATURE =.V = -.V V = ±V V = ±V G-0 G V (V) TEMPERATURE ( ) TEMPERATURE ( ) 0 0 = V = -V = V HARGE JETION vs. ANALOG VOLTAGE L = nf G UPPLY URRENT vs. TEMPERATURE A: I+ at =.V B: I- at = -.V : I L at = V G-08 Q (p) I+, I-, IL () A B V (V) TEMPERATURE ( )
6 Pin escription IP/O/TOP P QFN NAME,, 9, 8,, 7, Input 2,, 0, 7,, 8, Analog witch rain Terminal,,,, 2, 9, Analog witch ource Terminal 2 Negative-upply Voltage Input Ground 2 0 Logic upply Voltage Applications Information Operation with upply Voltages Other Than V Using supply voltages other than V will reduce the analog signal range. The switches operate with ±.V to ±20V bipolar supplies or with a +0V to +0V single supply; connect to 0V when operating with a single supply. Also, all device types can operate with unbalanced supplies such as +2V and -V. must be connected to +V to be TTL compatible, or to for MO-logic level inputs. The Typical Operating haracteristics graphs show typical on-resistance with ±V, ±0V, and ±V supplies. (witching times increase by a factor of two or more for operation at ±V.) Overvoltage Protection Proper power-supply sequencing is recommended for all MO devices. o not exceed the absolute maximum ratings because stresses beyond the listed ratings may cause permanent damage to the devices. Always sequence on first, followed by VL,, and logic inputs. If power-supply sequencing is not possible, add two small, external signal diodes in series with supply pins for overvoltage protection (Figure ). Adding diodes reduces the analog signal range to V below and V below, without affecting low switch resistance and low leakage characteristics. evice operation is unchanged, and the difference between and should not exceed +V. V g FUNTION Positive-upply Voltage Input onnected to ubstrate Figure. Overvoltage Protection Using External Blocking iodes
7 Timing iagrams/test ircuits LOGI PUT WITH OUTPUT +V 0V 0V Figure 2. witching-time 0% V OUT t ON t tr < 20ns tf < 20ns 0.9 x V OUT 0.9 x V OUT LOGI PUT WAVEFORM VERTE FOR WITHE THAT HAVE THE OPPOITE LOGI ENE. LOGI PUT WITH PUT +V +V 0V -V REPEAT TET FOR AN, FOR LOA ONITION, EE Electrical haracteristics. L LUE FIXTURE AN TRAY APAITANE. R V OUT = V ( L R L + r (ON) ) R L 00Ω G G2 G WITH OUTPUT V OUT L pf LOGI PUT WITH OUTPUT (VO) WITH OUTPUT 2 (VO2) +V 0V 0V 0V 0% t 0.9 x VOUT t 0.9 x VOUT2 V = +0V V 2 = +0V LOGI PUT 2 +V +V -V R L2 L LUE FIXTURE AN TRAY APAITANE. V OUT2 L2 R L = 00Ω L = pf R L G V OUT L Figure. G Break-Before-Make V OUT ON V OUT V GEN R GEN +V +V L G G2 G V OUT ON Q = ( V OUT )( L ) EPEN ON WITH ONFIGURATION; PUT POLARITY ETERME BY ENE OF WITH. -V V = +V Figure. harge-injection 7
8 Timing iagrams/test ircuits (continued) IGNAL GENERATOR ANALYZER R L Figure. Off-Isolation +V +V -V G G2 G 0V or 2.V IGNAL GENERATOR 0dBm ANALYZER 0V or 2.V R L Figure. rosstalk +V +V -V G G2 G 0Ω 0V or 2.V APAITANE METER f = MHz +V +V G G2 G 0V or 2.V APAITANE METER f = MHz +V +V G G2 G 0V or 2.V -V -V Figure 7. hannel-off apacitance Figure 8. hannel-on apacitance 8
9 Ordering Information (continued) PART TEMP. RANGE P-PAKAGE GEGE -0 to +8 QFN GJ -0 to +8 Plastic IP GY -0 to +8 Narrow O GK -0 to +8 ERIP GAK - to +2 ERIP** G2J 0 to +70 Plastic IP G2UE 0 to +70 TOP G2Y 0 to +70 Narrow O G2/ 0 to +70 ice* G2J -0 to +8 Plastic IP G2EGE -0 to +8 QFN G2Y -0 to +8 Narrow O G2K -0 to +8 ERIP G2AK - to +2 ERIP** GJ 0 to +70 Plastic IP GUE 0 to +70 TOP GY 0 to +70 Narrow O G/ 0 to +70 ice* EEGE -0 to +8 QFN GJ -0 to +8 Plastic IP GY -0 to +8 Narrow O GK -0 to +8 ERIP GAK - to +2 ERIP** * ontact factory for dice specifications. **ontact factory for availability and processing to MIL-T-88B. hip Topography 0.080" (2.0mm) TRANITOR OUNT: UBTRATE ONNETE TO " (2.mm) Pin onfigurations/functional iagrams (continued) TOP VIEW G 0 G2 0 G QFN 9
10 Package Information PIPN.EP 0
11 Package Information (continued) O.EP IP.EP
12 Package Information (continued) TOP.EP Maxim cannot assume responsibility for use of any circuitry other than circuitry entirely embodied in a Maxim product. No circuit patent licenses are implied. Maxim reserves the right to change the circuitry and specifications without notice at any time. 2 Maxim Integrated Products, 20 an Gabriel rive, unnyvale, A 908 (08) Maxim Integrated Products Printed UA is a registered trademark of Maxim Integrated Products.
IN1 IN2 DG412 GND IN3 IN4 DIP/SO/TSSOP DG412 LOGIC SWITCH OFF SWITCHES SHOWN FOR LOGIC 0 INPUT
9-4728; Rev 7; 9/08 Improved, Quad, General escription Maxim s redesigned analog switches now feature low on-resistance matching between switches (3Ω max) and guaranteed on-resistance flatness over the
More informationImproved, Dual, High-Speed Analog Switches
-477; Rev ; 6/ Improved, ual, High-peed Analog witches General escription Maxim's redesigned G4// analog switches now feature guaranteed low on-resistance matching between switches (Ω max) and guaranteed
More informationPrecision, Quad, SPST Analog Switches
9-8; Rev ; 9/ Precision, Quad, SPST Analog Switches General Description The are precision, quad, single-pole single-throw (SPST) analog switches. The MAX364 has four normally closed (N), and the MAX365
More informationPrecision, Quad, SPDT, CMOS Analog Switch
19-0189; Rev 1; 6/99 Precision, Quad, SPDT, MOS Analog Switch General Description The is a precision, quad, single-pole doublethrow (SPDT) analog switch. The four independent switches operate with bipolar
More informationImproved, SPST/SPDT Analog Switches
9-0; Rev 2; 2/96 Improved, PT/PT nalog witches General escription Maxim s redesigned G7/G/G9 precision, CMO, monolithic analog switches now feature guaranteed on-resistance matching (3Ω max) between switches
More informationPART TOP VIEW. Maxim Integrated Products 1
9-96; Rev ; 2/ 45, SPDT Analog Switch in SOT23-8 General Description The is a dual-supply, single-pole/doublethrow (SPDT) analog switch. On-resistance is 45 max and flat (7 max) over the specified signal
More informationPrecision, Quad, SPST Analog Switches
9-022; Rev ; 4/94 Precision, Quad, SPST nalog Switches General escription The are precision, quad, single-pole single-throw (SPST) analog switches. The MX35 has four normally closed (N), and the MX352
More informationON OFF PART. Pin Configurations/Functional Diagrams/Truth Tables 5 V+ LOGIC
9-88; Rev ; /7 25Ω SPST Analog Switches in SOT23-6 General Description The are dual-supply single-pole/single-throw (SPST) switches. On-resistance is 25Ω max and flat (2Ω max) over the specified signal
More informationPrecision, Quad, SPST Analog Switches
-0; Rev ; /0 Precision, Quad, SPST nalog Switches General escription The are precision, quad, single-pole single-throw (SPST) analog switches. The MX has four normally closed (N), and the MX has four normally
More informationDG417/418/419. Precision CMOS Analog Switches. Features Benefits Applications. Description. Functional Block Diagram and Pin Configuration
G417/418/419 Precision MO Analog witches Features Benefits Applications 1-V Analog ignal Range On-Resistance r (on) : 2 Fast witching Action t ON : 1 ns Ultra Low Power Requirements P :3 nw TTL and MO
More informationPrecision, 8-Channel/Dual 4-Channel, High-Performance, CMOS Analog Multiplexers
9-027; Rev 2; 8/02 Precision, 8-Channel/Dual 4-Channel, General Description The / precision, monolithic, CMOS analog multiplexers (muxes) offer low on-resistance (less than 0Ω), which is matched to within
More informationQuad SPST CMOS Analog Switches
Quad PT MO Analog witches Low On-Resistance: Low Leakage: 8 pa Low Power onsumption:.2 mw Fast witching Action t ON : 1 ns Low harge Injection Q: 1 p G21A/G22 Upgrades TTL/MO-ompatible Logic ingle upply
More informationPin Configurations/Functional Diagrams/Truth Tables IN V+ GND SOT23-6* MAX4544 ON OFF OFF ON SWITCHES SHOWN FOR "0" INPUT. Maxim Integrated Products 1
9-; Rev ; / Low-Voltage, Single-Supply General Description The MAX MAX are precision, dual analog switches designed to operate from a single +.V to +V supply. Low power consumption (µw) makes these parts
More informationQuad SPST CMOS Analog Switches
Quad PT MO Analog witches ERIPTION The G441/442 monolithic quad analog switches are designed to provide high speed, low error switching of analog and audio signals. The G441 has a normally closed function.
More informationPin Configurations/Functional Diagrams/Truth Tables IN V+ GND SOT23-6* MAX4544 ON OFF OFF ON SWITCHES SHOWN FOR "0" INPUT. Maxim Integrated Products 1
9-; Rev ; / Low-Voltage, Single-Supply General Description The are precision, dual analog switches designed to operate from a single +.7V to +V supply. Low power consumption (µw) makes these parts ideal
More informationLow-Power, High-Speed CMOS Analog Switches
New Product G1B/3B/5B Low-Power, High-peed MO Analog witches FEATURE BENEFIT APPLIATION 44-V upply Max Rating 15-V Analog ignal Range On-Resistance r (on) : 23 Low Leakage I (on) : pa Fast witching t ON
More informationPrecision, Quad, SPST Analog Switches
98; Rev ; 6/ General Description The are precision, quad, singlepole singlethrow (SPST) analog switches. The MAX36 has four normally closed (N) switches, and the MAX36 has four normally open (NO) switches.
More informationLOW HIGH OFF ON. Maxim Integrated Products 1
9-79; Rev ; /07 Low-Voltage, Quad, SPST General Description The MAX0/MAX/MAX are quad, low-voltage, single-pole/single-throw (SPST) analog switches. On-resistance (00Ω, max) is matched between switches
More informationMonolithic CMOS Analog Multiplexers
19-008; Rev 3; 9/01 Monolithic CMOS Analog Multiplexers General escription Maxim s and are monolithic CMOS analog multiplexers (muxes): the is a single 8-channel (1-of-8) mux, and the is a differential
More informationLow-Leakage, CMOS Analog Multiplexers
/ General Description The / are monolithic, CMOS analog multiplexers (muxes). The 8-channel is designed to connect one of eight inputs to a common output by control of a 3-bit binary address. The dual,
More informationPrecision CMOS Analog Switches
Precision MO Analog witches G417, G418, G419 ERIPTION The G417, G418, G419 monolithic MO analog switches were designed to provide high performance switching of analog signals. ombining low power, low leakages,
More informationLow-Cost, Low-Voltage, Quad, SPST, CMOS Analog Switches
19-0439; Rev 1; 3/96 ow-ost, ow-voltage, Quad, SPST, General escription The 4066/4066 quad, SPST, MOS analog switches are designed to provide superior performance over the industry-standard devices. These
More information2Ω, Quad, SPST, CMOS Analog Switches
9-73; Rev ; 4/ 2Ω, Quad, SPST, CMOS Analog Switches General Description The // quad analog switches feature.6ω max on-resistance (R ) when operating from a dual ±5V supply. R is matched between channels
More information1 pc Charge Injection, 100 pa Leakage, CMOS 5 V/+5 V/+3 V Quad SPST Switches ADG611/ADG612/ADG613
a FEATURE 1 pc Charge Injection 2.7 V to 5.5 V ual upply +2.7 V to +5.5 V ingle upply Automotive Temperature Range 4 C to +125 C 1 pa Max @ 25 C Leakage Currents 85 On-Resistance Rail-to-Rail witching
More informationPrecision, 16-Channel/Dual 8-Channel, Low-Voltage, CMOS Analog Multiplexers
/ Precision, 6-Channel/Dual 8-Channel, General Description The / low-voltage, CMOS analog multiplexers (muxes) offer low on-resistance (Ω max), which is matched to within 6Ω between switches and remains
More informationPrecision, 16-Channel/Dual 8-Channel, High-Performance, CMOS Analog Multiplexers
9-27; Rev 3; 3/ Precision, 6-Channel/Dual 8-Channel, General Description The MA36/MA37 precision, monolithic, CMOS analog multiplexers (muxes) offer low on-resistance (less than Ω), which is matched to
More informationPS391/PS392/PS393. Precision, Quad, SPST, Analog Switches. Description
PS39/PS39/PS393 379379379379379379379379379379379379379 Precision, Quad, SPST, Analog Switches Features Low On-Resistance, ohms typ) Minimizes Disttion and Err oltages On-Resistance Match Between hannels,
More informationLow-Power, High-Speed CMOS Analog Switches
Low-Power, High-Speed MOS Analog es G41/43/4 ESRIPTION The G41/43/4 monolithic analog switches were designed to provide precision, high performance switching of analog signals. ombining low power (.3 µw,
More informationPART MAX312CPE MAX312CSE. Pin Configurations/Functional Diagrams/Truth Tables IN1 COM1 NO1 V- GND IN1 COM1 NC1 V- GND IN1 COM1 NO1 V- GND
9-2; Rev 2; 7/2 Ω, Quad, SPST, MOS nalog Switches General escription Maxim s MX32/MX33/MX3 analog switches feature low on-resistance (Ω max) and.ω on-resistance matching between channels. These switches
More information10Ω, Quad, SPST, CMOS Analog Switches
-; Rev ; / Ω, Quad, SPST, MOS nalog Switches General Description Maxim s MX/MX/MX analog switches feature low on-resistance (Ω max) and.ω on-resistance matching between channels. These switches conduct
More informationLow Voltage 400 MHz Quad 2:1 Mux with 3 ns Switching Time ADG774A
a FEATURE Bandwidth >4 MHz Low Insertion Loss and On Resistance: 2.2 Typical On-Resistance Flatness.3 Typical ingle 3 V/5 upply Operation Very Low istortion:
More informationQuad SPST CMOS Analog Switches
G441, G442 Quad PT MO Analog witches ERIPTION The G441, G442 monolithic quad analog switches are designed to provide high speed, low error switching of analog and audio signals. The G441 has a normally
More information35Ω, Low-Voltage, SPST/SPDT Analog Switches in UCSP Package
19-1994; Rev 3; 2/3 35, Low-Voltage, SPST/SPDT General Description The low on-resistance (R ON ), low-voltage analog switches operate from a single +2.V to +5.5V supply. The / are single-pole/single-throw
More informationFeatures. Functional Diagrams, Pin Configurations, and Truth Tables
Features Low On-Resistance (Ω typ) Minimizes Distortion and Error Voltages Low Glitching Reduces Step Errors in Sample-and-Holds. Charge Injection, pc typ Single-Supply Operation (+.V to +1V) Improved
More informationLow-Voltage, 8-Channel/Dual 4-Channel Multiplexers with Latchable Inputs
9-396; Rev. ; 5/95 Low-Voltage, 8-Channel/Dual 4-Channel General Description The are low-voltage, CMOS, -of-8 and dual 4-channel muxes with latchable digital inputs. They feature low-voltage operation
More informationQuad SPST CMOS Analog Switches
G441, G442 Quad PT MO Analog witches ERIPTION The G441, G442 monolithic quad analog switches are designed to provide high speed, low error switching of analog and audio signals. The G441 has a normally
More informationLow Capacitance, Low Charge Injection, ±15 V/+12 V icmos Quad SPST Switches ADG1212-EP
Enhanced Product Low Capacitance, Low Charge Injection, ±15 V/+12 V icmo Quad PT witches FEATURE 1 pf off capacitance 2.6 pf on capacitance
More informationCOM COM GND MAX4644 OFF OFF
9-7; Rev ; / High-Speed, Low-Voltage, 4, General Description The is a single-pole/double-throw (SPDT) switch that operates from a single supply ranging from +.V to +.V. It provides low 4 on-resistance
More informationLC2 MOS 4-/8-Channel High Performance Analog Multiplexers ADG408/ADG409
a FEATURES 44 upply Maximum Ratings to Analog Signal Range Low On Resistance ( max) Low Power (I SUPPLY < 75 A) Fast Switching Break-Before-Make Switching Action Plug-in Replacement for G408/G409 APPLICATIONS
More informationPS381/PS383/PS385. Precision, 17V Analog Switches. Features. Applications. Functional Diagrams, Pin Configurations, and Truth Tables
79797979797979797979797979 Features Low On-Resistance (Ω typ) Minimizes Distortion and Error Voltages Low Glitching Reduces Step Errors in Sample-and-Holds. Charge Injection, pc typ Single Supply (+V to
More information8-Channel/Dual 4-Channel, Low-Leakage, CMOS Analog Multiplexers
9-272; Rev 3; /4 8-Channel/Dual 4-Channel, The / are monolithic, CMOS analog multiplexers (muxes). The 8-channel is designed to connect one of eight inputs to a common output by control of a 3-bit binary
More information1 pc Charge Injection, 100 pa Leakage CMOS 5 V/5 V/3 V 4-Channel Multiplexer ADG604
a FEATURES 1 pc Charge Injection (Over the Full Signal Range) 2.7 V to 5.5 V ual Supply 2.7 V to 5.5 ingle Supply Automotive Temperature Range: 4 C to +125 C 1 pa Max @ 25 C Leakage Currents 85 Typ On
More information8-Ch/Dual 4-Ch High-Performance CMOS Analog Multiplexers
8-Ch/ual 4-Ch High-Performance CMOS Analog Multiplexers Low On-Resistance r S(on) : Low Charge Injection Q: pc Fast Transition Time t TRANS : 6 ns Low Power I SUPPLY : A Single Supply Capability 44-V Supply
More informationLC 2 MOS Precision Analog Switch in MSOP ADG419-EP
LC 2 MOS Precision Analog Switch in MSOP AG49-EP FEATURES 44 V supply maximum ratings VSS to V analog signal range Low on resistance:
More information8-Channel/Dual 4-Channel, Low-Leakage, CMOS Analog Multiplexers
9-272; Rev 3; / 8-Channel/Dual -Channel, The / are monolithic, CMOS analog multiplexers (muxes). The 8-channel is designed to connect one of eight inputs to a common output by control of a 3-bit binary
More informationFEATURES APPLICATIONS
6 On-Resistance, +12 V, ± V, + V, +3 V, SPST and SPDT Switches DESRIPTION analog switches are designed to operate from +3 V to +16 V single supply or ± 3 V to ± 8 V dual supply and are fully specified
More informationMAX4636EUB -40 C to +85 C 10 µmax 1 NO1 IN1 GND. 3 x 3 THIN QFN OFF ON ON OFF SWITCHES SHOWN FOR "0" INPUT. Maxim Integrated Products 1
9-79; Rev ; /3 Fast, Low-Voltage, Dual 4 SPDT General Description The are fast, dual 4 singlepole/double-throw (SPDT) analog switches that operate with supply voltages from +.8V to +.V. High switching
More informationonlinecomponents.com
a FEATURES +.8 V to +. ingle Supply 2. V ual Supply 2. ON Resistance. ON Resistance Flatness pa Leakage Currents 4 ns Switching Times Single 6-to- Multiplexer AG76 ifferential 8-to- Multiplexer AG77 28-Lead
More informationCMOS, +1.8 V to +5.5 V/ 2.5 V, 2.5 Low-Voltage, 8-/16-Channel Multiplexers ADG706/ADG707 REV. A
a FEATURES +.8 V to +. ingle Supply. V ual Supply. ON Resistance. ON Resistance Flatness pa Leakage Currents ns Switching Times Single -to- Multiplexer AG ifferential 8-to- Multiplexer AG 8-Lead TSSOP
More informationCMOS ±5 V/+5 V/+3 V Triple SPDT Switch ADG633
CMOS ±5 V/+5 V/+3 V Triple SPT Switch AG633 FEATURES ±2 V to ±6 V ual Supply 2 V to 12 ingle Supply Automotive Temperature Range 4 o C to +125 o C
More informationLow-Voltage Single SPDT Analog Switch
Low-Voltage Single SPDT Analog Switch DG22 DESCRIPTION The DG22 is a single-pole/double-throw monolithic CMOS analog switch designed for high performance switching of analog signals. Combining low power,
More information3.5Ω (max) at +3V PART. MAX4733EUA -40 C to +85 C 8 µmax MAX4732. Pin Configurations/Functional Diagrams/Truth Tables TOP VIEW (BUMPS ON BOTTOM) NC1
9-264; Rev 2 2/6 Ω, Dual SPST Analog Switches in UCSP General Description The MAX473// low-voltage, dual, single-pole/single-throw (SPST) analog switches operate from a single +2V to +V supply and handle
More informationLow-Voltage Single SPDT Analog Switch
Low-Voltage Single SPDT Analog Switch DG22 DESCRIPTION The DG22 is a single-pole/double-throw monolithic CMOS analog switch designed for high performance switching of analog signals. Combining low power,
More informationMAX14753 V DD INA0 INA1 INA2 INA3 OUT INB0 INB1 INB2 INB3
19-4255; Rev 3; 7/10 8-Channel/Dual 4-Channel General Description The are 8-to-1 and dual 4-to-1 high-voltage analog multiplexers. Both devices feature 60Ω (typ) on-resistance with 0.03Ω (typ) on-resistance
More informationMAX4638/MAX Ω, Single 8:1 and Dual 4:1, Low-Voltage Analog Multiplexers
General Description The / are single : and dual : CMOS analog multiplexers/demultiplexers (muxes/ demuxes). Each mux operates from a single +.V to +V supply or dual ±.V supplies. These devices feature.ω
More informationQuad SPST CMOS Analog Switches
G444, G44 Quad SPST MOS Analog Switches APPLIATIONS Audio switching Battery powered systems ata acquisition Sample-and-hold circuits Telecommunication systems Automatic test equipment Single supply circuits
More informationAG726/AG732 SPECIFICATIONS ( = V %, = V, GN = V, unless otherwise noted.) B Version 4 C Parameter +2 C to +8 C Unit Test Conditions/Comments ANALOG SW
a FEATURES.8 V to. ingle Supply 2. V ual-supply Operation 4 On Resistance. On Resistance Flatness 48-Lead TQFP or 48-Lead 7 mm 7 mm CSP Packages Rail-to-Rail Operation 3 ns Switching Times Single 32-to-
More informationMAX14760/MAX14762/MAX14764 Above- and Below-the-Rails Low-Leakage Analog Switches
19-652; Rev ; 9/11 EVALUATION KIT AVAILABLE MAX1476// General Description The MAX1476// analog switches are capable of passing bipolar signals that are beyond their supply rails. These devices operate
More informationPowered-off Protection, 6, 1.8 V to 5.5 V, SPDT Analog Switch (2:1 Multiplexer)
Powered-off Protection,, 1. V to 5.5 V, SPDT Analog Switch (:1 Multiplexer) DESCRIPTION The is a high performance single-pole, double-throw (SPDT) analog switch designed for 1. V to 5.5 V operation with
More informationAOZ6115 High Performance, Low R ON, SPST Analog Switch
OZ6115 High Performance, Low R ON, PT nalog witch General Description The OZ6115 is a high performance single-pole single-throw (PT), low power, TTL-compatible bus switch. The OZ6115 can handle analog
More informationPowered-off Protection, 1, 1.8 V to 5.5 V, SPDT Analog Switch (2:1 Multiplexer)
DGE Powered-off Protection,,.8 V to 5.5 V, SPDT Analog Switch (: Multiplexer) DESCRIPTION The DGE is a high performance single-pole, double-throw (SPDT) analog switch designed for.8 V to 5.5 V operation
More informationSGM7227 High Speed USB 2.0 (480Mbps) DPDT Analog Switch
GENERAL DECRIPTION The GM7227 is a high-speed, low-power double-pole/ double-throw (DPDT) analog switch that operates from a single 1.8V to 4.3V power supply. GM7227 is designed for the switching of high-speed
More informationPrecision Monolithic Low-Voltage CMOS Analog Switches
G47L, G48L, G49L Precision Monolithic Low-Voltage MOS Analog Switches ESRIPTION The G47L, G48L, G49L are low voltage pin-for-pin compatible companion devices to the industry standard G47, G48, G49 with
More informationLow-Voltage Analog Temperature Sensors in SC70 and SOT23 Packages
19-2040; Rev 1; 6/01 Low-Voltage Analog Temperature Sensors General Description The precision, low-voltage, analog output temperature sensors are available in 5-pin SC70 and SOT23 packages. The devices
More informationSA CH SEGMENT /COMMON DRIVER FOR DOT MATRIX LCD
A06 A06 0 H EGMENT /OMMON RIVER FOR OT MATRIX L Ver. July, 000 A06 INTROUTION The A06 is an L driver LI which is fabricated by low power MO high voltage process technology. In segment driver mode, it can
More informationAOZ6135 High Performance, Low R ON, 1Ω SPDT Analog Switch
OZ6135 High Performance, Low R ON, 1Ω PDT nalog witch General Description The OZ6135 is a high performance single-pole double-throw (PDT), low power, TTL-compatible bus switch. The OZ6135 can handle analog
More informationQuad SPST CMOS Analog Switch
Quad PT CMO Analog witch HI-201/883 The HI-201/883 is a monolithic device comprised of four independently selectable PT switchers which feature fast switching speeds (185ns typical) combined with low power
More informationDual High-Speed 1.5A MOSFET Drivers
19-132; Rev 2; 6/6 Dual High-Speed 1.A MOSFET Drivers General Description The are dual monolithic MOSFET drivers designed to tralate TTL/CMOS inputs to high voltage/current outputs. The MAX4426 is a dual
More informationAOZ Ω Low-Voltage Dual SPDT Analog Switch. General Description. Features. Applications AOZ6236
0.35 Ω Low-Voltage Dual PDT nalog witch General Description The OZ6236 is a 0.35 Ω low-voltage Dual ingle Pole Double Throw (PDT) analog switch. The OZ6236 operates from a single 1.65 V to 4.3 V supply.
More informationDescription. For Fairchild s definition of Eco Status, please visit:
FSA2357 Low R ON 3:1 Analog Switch Features 10µA Maximum I CCT Current Over an Expanded Control Voltage Range: V IN=2.6V, V CC=4.5V On Capacitance (C ON): 70pF Typical 0.55Ω Typical On Resistance (R ON)
More informationSGM48753 CMOS Analog Switch
GENERAL DESCRIPTION The is a CMOS analog IC configured as three single-pole/double-throw (SPDT) switches. This CMOS device can operate from 2.5V to 5.5V single supplies. Each switch can handle rail-to-rail
More informationDATASHEET DG441, DG442. Features. Applications. Pinout. Monolithic, Quad SPST, CMOS Analog Switches. FN3281 Rev Page 1 of 14.
DATASHEET DG441, DG442 Monolithic, Quad SPST, MOS Analog Switches The DG441 and DG442 monolithic MOS analog switches are drop-in replacements for the popular DG21A and DG22 series devices. They include
More informationDATASHEET DG401, DG403. Features. Applications. Pinouts. Ordering Information. Monolithic CMOS Analog Switches. FN3284 Rev 11.
DATASHEET DG41, DG43 Monolithic MOS Analog Switches FN3284 Rev 11. The DG41 and DG43 monolithic MOS analog switches have TTL and MOS compatible digital inputs. These switches feature low analog ON resistance
More informationCase Outline(s). The case outlines shall be designated in Mil-Std-1835 and as follows:
+SCOPE: TTL COMPATIBLE CMOS ANALOG SWITCHES Device Type Generic Number 0 DG300A(x)/883B 02 DG30A(x)/883B 03 DG302A(x)/883B 04 DG303A(x)/883B Case Outline(s). The case outlines shall be designated in Mil-Std-835
More informationImproved Quad CMOS Analog Switches
Improved Quad CMOS Analog Switches DG211B, DG212B DESCRIPTION The DG211B, DG212B analog switches are highly improved versions of the industry-standard DG211, DG212. These devices are fabricated in proprietary
More information16, Low Parasitic Capacitance and Leakage, +12 V / +5 V / +3 V / ± 5 V Quad SPST Switches
16, Low Parasitic apacitance and Leakage, +12 V / +5 V / +3 V / ± 5 V Quad SPST Switches DESRIPTION The DG411LE, DG412LE, and DG413LE are monolithic quad singlepolesinglethrow analog switches. The DG411LE
More informationAOZ Ω Low-Voltage Dual-DPDT Analog Switch
0.3Ω Low-Voltage Dual-DPDT nalog witch General Description The OZ6274 is a dual Double-Pole, Double-Throw (DPDT) analog switch that is designed to operate from a single 1.65V to 4.3V supply. The OZ6274
More informationFour-Channel Thermistor Temperature-to-Pulse- Width Converter
19-234; Rev ; 1/2 General Description The four-channel thermistor temperature-topulse-width converter measures the temperatures of up to four thermistors and converts them to a series of output pulses
More informationOctal D-type transparent latch; 3-state
Rev. 02 18 October 2007 Product data sheet 1. General description 2. Features The is an octal -type transparent latch featuring separate -type inputs for each latch and 3-state true outputs for bus-oriented
More informationFeatures. Symbol Parameter Rating Units V DS Drain-Source Voltage 40 V V GS Gate-Source Voltage ±20 V
General escription These N-Channel enhancement mode power field effect transistors are using trench MO technology. This advanced technology has been especially tailored to minimize on-state resistance,
More informationTemperature range Name Description Version 74LVC74AD 40 C to +125 C SO14 plastic small outline package; 14 leads;
Rev. 06 4 June 2007 Product data sheet 1. General description 2. Features 3. Ordering information The is a dual edge triggered D-type flip-flop with individual data (D) inputs, clock (P) inputs, set (SD)
More informationS6B CH SEGMENT / COMMON DRIVER FOR DOT MATRIX LCD
6B006 0 H EGENT / OON RIVER FOR OT ATRIX L June. 000. Ver. 0.0 ontents in this document are subject to change without notice. No part of this document may be reproduced or transmitted in any form or by
More informationDual 4-Input AND Gate
TENIAL DATA Dual 4-Input AND ate The is high-speed Si-gate MOS device and is pin compatible with low power Schottky TTL (LSTTL). The device provide the Dual 4-input AND function. Outputs Directly Interface
More informationPrecision 8-Ch/Dual 4-Ch Low Voltage Analog Multiplexers
Precision 8-Ch/ual 4-Ch Low Voltage Analog Multiplexers ESCRIPTION The G948, G949 uses BiCMOS wafer fabrication technology that allows the G948, G949 to operate on single and dual supplies. Single supply
More informationStandard Products UT54ACS273/UT54ACTS273 Octal D-Flip-Flops with Clear. Datasheet December 16, 2011
Standard Products UT54AS273/UT54ATS273 Octal -Flip-Flops with lear atasheet ecember 16, 2011 www.aeroflex.com/logic FEATUES ontains eight flip-flops with single-rail outputs Buffered clock and direct clear
More informationTriple 3-Input NOR Gate
TENIAL DATA IN4T2A Triple 3-Input NOR ate The IN4T2A is high-speed Si-gate MOS device and is pin compatible with low power Schottky TTL (LSTTL). The device provide the Triple 3-input NOR function. Outputs
More informationFEATURES BENEFITS APPLICATIONS
0.37, Low Capacitance, Dual DPDT / Quad SPDT Analog Switch DESCRIPTION The, is a four-channel single-pole double-throw (SPDT) analog switch with two control inputs. It is also known as a two-channel double-pole
More informationMiniature Electronically Trimmable Capacitor V DD. Maxim Integrated Products 1
19-1948; Rev 1; 3/01 Miniature Electronically Trimmable Capacitor General Description The is a fine-line (geometry) electronically trimmable capacitor (FLECAP) programmable through a simple digital interface.
More informationCharacteristic Symbol Value Unit Output Current I out 150 ma
LBNB ma LOAD SWITH FEATURING OMPLEMENTARY BIPOLAR TRANSISTORS NEW PRODUT General Description LMNB is best suited for applications where the load needs to be turned on and off using control circuits like
More informationDevice Type Generic Number Circuit Function 01 DG406A(x)/883B 16-Channel Analog Multiplexer 02 DG407A(x)/883B Dual 8-Channel Analog Multiplexer
SCOPE: IMPROVED 6-CHANNEL/DUAL 8-CHANNEL, HIGH PERFORMANCE CMOS ANALOG MULTIPLEXER Device Type Generic Number Circuit Function 0 DG406A(x)/883B 6-Channel Analog Multiplexer DG407A(x)/883B Dual 8-Channel
More informationFDS4435BZ P-Channel PowerTrench MOSFET -30V, -8.8A, 20m
F35BZ P-Channel PowerTrench MOFET -V, -8.8A, m Features Max r (on) = m at V G = -V, I = -8.8A Max r (on) = 35m at V G = -.5V, I = -.7A Extended V G range (-5V) for battery applications HBM E protection
More informationOctal 3-State Noninverting D Flip-Flop
TEHNIAL ATA IN74H74A Octal 3-State Noninverting Flip-Flop High-Performance Silicon-Gate MOS N SUFFIX PLASTI IP The IN74H74A is identical in pinout to the LS/ALS74. The device inputs are compatible with
More informationINTEGRATED CIRCUITS. 74LVC138A 3-to-8 line decoder/demultiplexer; inverting. Product specification 1998 Apr 28
INTEGRATED CIRCUITS -to-8 line decoder/demultiplexer; inverting 998 Apr 8 FEATURES Wide supply voltage range of. to. V In accordance with JEDEC standard no. 8-A Inputs accept voltages up to. V CMOS lower
More informationINTEGRATED CIRCUITS. 74LV00 Quad 2-input NAND gate. Product specification Supersedes data of 1998 Apr 13 IC24 Data Handbook.
INTEGRATED CIRCUITS Supersedes data of 1998 Apr 13 IC24 Data Handbook 1998 Apr 20 FEATURES Wide operating voltage: 1.0 to 5.5 V Optimized for low voltage applications: 1.0 to 3.6 V Accepts TTL input levels
More information8-Input NAND Gate IN74HCT30A TECHNICAL DATA LOGIC DIAGRAM PIN ASSIGNMENT FUNCTION TABLE. Rev. 00
TENIL T IN74T3 8-Input NN ate The IN74T3 is high-speed Si-gate MOS device and is pin compatible with low power Schottky TTL (LSTTL). The device provide the 8-input NN function. Outputs irectly Interface
More informationIH5341, IH5352. Dual SPST, Quad SPST CMOS RF/Video Switches. Description. Features. Ordering Information. Applications. Pinouts.
SEMICONDUCTOR IH, IH2 December Features Description Dual SPST, Quad SPST CMOS RF/Video Switches R DS(ON) < Ω Switch Attenuation Varies Less Than db From DC to 00MHz "OFF" Isolation > 0dB Typical at 0MHz
More informationHigh Voltage, Latch-Up Proof, 4-Channel Multiplexer ADG5204
High Voltage, Latch-Up Proof, 4-Channel Multiplexer AG524 FEATURES Latch-up proof 3 pf off source capacitance 26 pf off drain capacitance.6 pc charge injection Low leakage:.4 na maximum at 85 C ±9 V to
More informationThe 74LV08 provides a quad 2-input AND function.
Quad 2-input ND gate Rev. 03 6 pril 2009 Product data sheet. General description 2. Features 3. Ordering information The is a low-voltage Si-gate CMOS device that is pin and function compatible with 74HC0
More informationNC7SB3157 TinyLogic Low Voltage UHS Analog Switch 2-Channel Multiplexer/Demultiplexer (Preliminary)
September 1999 Revised November 1999 TinyLogic Low Voltage UHS Analog Switch 2-Channel Multiplexer/Demultiplexer (Preliminary) General Description The is a high performance, Analog Switch 2- channel CMOS
More informationNeotec Semiconductor Ltd. 新德科技股份有限公司
rystalfontz Neotec emiconductor Ltd. L river INTROUTION The is a L driver LI that is fabricated by low power MO high voltage process technology. In segment drive mode, it can be interfaced in -bit serial
More information