Monolithic CMOS Analog Multiplexers
|
|
- Robyn Carr
- 5 years ago
- Views:
Transcription
1 19-008; Rev 3; 9/01 Monolithic CMOS Analog Multiplexers General escription Maxim s and are monolithic CMOS analog multiplexers (muxes): the is a single 8-channel (1-of-8) mux, and the is a differential 4-channel (-of-8) mux. Both devices guarantee break-before-make switching. Maxim guarantees these muxes will not latch up if the power supplies are turned off with the input signals still present. Maxim also guarantees continuous operation when these devices are powered by supplies ranging from ±4.5V to ±18V. The are plug-in upgrades for the industry-standard G08A/, respectively. Maxim s parts have lower on-resistance, faster enable switching times, and significantly lower leakage currents. The / also consume significantly lower power, making them ideal for portable equipment. Control Systems ata Logging Systems Aircraft Heads-Up isplays ata-acquisition Systems Signal Routing Applications Typical Operating Circuits Improved Second Source Operate from ±4.5V to ±18V Supplies Symmetrical, Bidirectional Operation Logic and Enable Inputs, TTL and CMOS Compatible Latchup-Proof Construction Monolithic, Low-Power CMOS esign TOP VIEW 1 16 Features Ordering Information PART TEMP RANGE PIN-PACKAGE CJ 0 C to +70 C 16 Plastic IP CWE 0 C to +70 C 16 Wide SO C/ 0 C to +70 C ice* BK -0 C to +85 C 16 CERIP J -40 C to +85 C 16 Plastic IP Y -40 C to +85 C 16 Narrow SO EGE -40 C to +85 C 16 QFN EWE -40 C to +85 C 16 Wide SO AK -55 C to +15 C 16 CERIP Ordering Information continued at end of data sheet. *Contact factory for dice specifications. Pin Configurations CLOCK IN B IN ANALOG (S) +15V Q B Q C S1 S S3 S4 S5 S6 S7 S8 A ANALOG (S) S1 S S3 S A S5 S6 S7 S8 N.C. A IN r01 +15V Q Q r0 A N.C. S1A SA S1B SB S3A 6 11 S3B S4A 7 10 S4B ABLE IN (MUX ON/OFF CONTROL) A 8 9 B 8-CHANNEL SEQUTIAL MUX/EMUX Typical Operating Circuits continued at end of data sheet. IP/SO Pin Configurations continued at end of data sheet. Maxim Integrated Products 1 For pricing, delivery, and ordering information, please contact Maxim/allas irect! at , or visit Maxim s website at
2 ABSOLUTE MAXIMUM RATINGS Voltage Referenced to...+44v... +5V igital Inputs, V S and V (Note 1)...-V to ( + V) or 0mA, whichever occurs first Current (any terminal, except S or )...30mA Continuous Current, S or...0ma Peak Current, S or (pulsed at 1ms, 10% duty cycle max)..40ma Continuous Power issipation (T A = +70 C) Plastic IP (derate 10.53mW/ C above +70 C)...84mW QFN (derate 19.mW/ C above +70 C) mW Narrow SO (derate 8.70mWI C above +70 C)...696mW Wide SO (derate 9.5mW/ C above +70 C)...76mW CERIP (derate 10.00mW/ C above +70 C)...800mW Operating Temperature Ranges: G50_ACJ/CWE/CGE...0 C to +70 C G50_ABK...-0 C to +85 C GS0_AJ/Y/EWE/EGE C to +85 C G50_AAK C to +15 C Storage Temperature Range C to +150 C Lead Temperature (soldering, 10s) C Note 1: Signals on S_, _, or IN_ exceeding or are clamped by internal diodes. Limit forward-diode current to maximum current ratings Stresses beyond those listed under Absolute Maximum Ratings may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated in the operational sections of the specifications is not implied. Exposure to absolute maximum rating conditions for extended periods may affect device reliability. ELECTRICAL CHARACTERISTICS ( = 15V, =, = OV, T A = +5 C, unless otherwise noted.) PARAMETER SYMBOL CONITIONS A A /E/B/C /E/B/C MIN TYP MAX MIN TYP MAX Anal og S i g nal Rang e V ANALOG V UNITS rain-source On- Resistance R S(ON) Sequence each switch on, V AL = 0.8V, V AH =.4V (Note 4) V = 10V, I S = -00µA V = 10V, I S = -00µA Ω Greatest Change in rain-source On- Resistance Between Channels R R S( ON) max RS( ON) min S(ON) =, R R S(ON) S( ON) 6 6 % -10V V S 10V Source Off- Leakage Current r ai n O ff- Leakag e C ur r ent r ai n O n- Leakag e C ur r ent I S(OFF) I (OFF) I (ON) V = 0V V = 0V V S = 10V, V = -10V V S = -10V, V = 10V V = 10V, V S = -10V V = 10V, V S = -10V V = 10V, V S = -10V V = -10V, V S = 10V Sequence each V S(all) = V = 10V switch on, V S(all) = V = -10V V AL = 0.8V V V S(all) = V = 10V AH =.4V (Note ) V S(all) = V = -10V
3 ELECTRICAL CHARACTERISTICS (continued) ( = 15V, =, = OV, T A = +5 C, unless otherwise noted.) PARAMETER SYMBOL CONITIONS LOGIC Logic Input Current, Input Voltage High Logic Input Current, Input Voltage Low YNAMIC A A /E/B/C /E/B/C MIN TYP MAX MIN TYP MAX V A = 4V I AH V A = 15V All V V =.4V I A = AL 0V V = 0V M ul ti p l exer S w i tchi ng Ti m e t transition Figure µs Break-Before-Make Interval t OP Figure µs Enable Turn-On Time t ON() Figure µs Enable Turn-Off Time t OFF() Figure µs Off-Isolation OIRR V = 0V, R L = 1kΩ, C L = l5pf, V S = 7V RMS f = 500kHz (Note 3) UNITS µa µa db Source Off-Capacitance C S(OFF) V S = 0V, V = 0V, f = 140kHz 5 5 pf rain Off- Capacitance SUPPLY I 5 5 C (OFF) V S = 0V, V = 0V, f = 140kHz GS09A 1 1 Positive Supply Current I+ V =.4V, all V A = 0V or.4v ma Negative Supply Current I- V =.4V, all V A = 0V or.4v ma Positive Supply Current in Standby Negative Supply Current in Standby Power-Supply Range for Continuous Operation I+ V = 0V, all V A = 0V or.4v ma I- V = 0V, all V A = 0V or.4v ma, (Notes 4, 5) ±4.5 ±18.0 ±4.5 ±18.0 V pf 3
4 ELECTRICAL CHARACTERISTICS ( = 15V, = 0V, T A = T MIN to T MAX, unless otherwise noted.) PARAMETER SYMBOL CONITIONS A A /E/B/C /E/B/C MIN TYP MAX MIN TYP MAX Analog Signal Range V ANALOG V rain-source On- Resistance Source Off-Leakage Current rain Off- Leakage Current rain On- Leakage Current LOGIC Logic Input Current, Input Voltage High Logic Input Current, Input Voltage Low R S(ON) I S(OFF) I (OFF) I (ON) S eq uence each sw i tch on, V AL = 0.8V, V AH =.4V V = 0V V = 0V S eq uence each sw i tch on, V AL = 0.8V, V AH =.4V (Note ) V = 10V, I S = -00µA V = 10V, I S = -00µA V S = 10V, V = -10V V S = -10V, V = -10V V = 10V, V S = -10V V = -10V, V S = -10V V = 10V, V S = -10V V = -10V, V S = -10V V S(all) = V = 10V V S(all) = V = -10V V S(all) = V = 10V V S(all) = V = -10V V A =.4V I AH V A = 15V I AL All V A = 0V V =.4V V = 0V UNITS Ω µa µa Note : I (ON) is leakage from driver into on switch. IVSI Note 3: Off-isolation = 0log IVI V S = input to off switch, V = output due to V S. Note 4: Electrical characteristics (such as on-resistance) change when power supplies other than ±15V are used. Note 5: For designs requiring single 5V or dual ±5V operation, refer to Maxim s improved MAX338 and MAX339. Minimum operating voltage for Y and Y is ±9V. 4
5 PIN NAME FUNCTION IP/SO QFN IP/SO QFN 1, 15, 16 15, 14, 13, A, Address Input 1, 16 15, 14, Address Input Enable Negative-Supply Voltage Input S1 S4 Analog Inputs, Bidirectional S1A S4A Analog Inputs, Bidirectional 8 6 Analog Outputs, Bidirectional 8, 9 6, 7 A, B Analog Outputs, Bidirectional S8 S5 Analog Inputs, Bidirectional S4B S1B Analog Inputs, Bidirectional Positive-Supply Voltage Input Ground Pin escription Functional iagrams S1 S1A S S3 SA S3A A S4 S5 S4A S1B S6 S7 SB S3B B S8 S4B CMOS ECOE LOGIC CMOS ECOE LOGIC A 8-CHANNEL SINGLE E MULTIPLEXER IFFERTIAL 4-CHANNEL MULTIPLEXER 5
6 LOGIC +.4V +15V S1 ±10V S S7 S8 A 50Ω 1MΩ V 35pF LOGIC +.4V +15V 50Ω S1 ±10V S1A S4A, A, SB, S3B S4B B 1MΩ V S 35pF Figure 1a. Switching-Time Test Circuit Figure 1b. Switching-Time Test Circuit +15V +15V S1-5V S1B -5V S S7 S1A S4A, A, SB, S3B LOGIC 50Ω A 1kΩ V 35pF LOGIC 50Ω B 1kΩ V S 35pF Figure a. Enable-Time Test Circuit Figure b. Enable-Time Test Circuit 6
7 LOGIC +.4V +15V 50Ω,, (A) ALL S AN A B, Figure 3. Break-Before-Make Test Circuit +5V 1kΩ V 35pF LOGIC t r < 0ns t f < 0ns V (SEE FIG. 1) TRANSITION TIME V (SEE FIG. ) TABLE t (ON) t (OFF) TIME V (SEE FIG. 3) OP TIME (B.B.M INTERVAL) 3V 50% 0 V S1 0.8V S V S8 V S8 t transition S 1 ON 0 0.1V 0 0.9V 0 V 0 V S V S 50% 0V t ON () t open S 8 ON t transition t OFF () Figure 4. Timing iagram for Figures 1,, and 3 Table 1a. Truth Table A ON X X X 0 NONE X = on t care. Table 1 b. Truth Table ON X X 0 NONE X = on t care. 7
8 CLOCK IN IFFERTIAL ANALOG S (S) +15V J Q 1/MM747C73 CLOCK Typical Operating Circuits (continued) S1A SA S3A A S4A S1B SB B S3B S4B J Q 1/MM747C73 IFFERTIAL ANALOG S (S) Ordering Information (continued) PART TEMP RANGE PIN-PACKAGE CJ 0 C to +70 C 16 Plastic IP CWE 0 C to +70 C 16 Wide SO C/ 0 C to +70 C ice* BK -0 C to +85 C 16 CERIP J -40 C to +85 C 16 Plastic IP Y -40 C to +85 C 16 Narrow SO EGE -40 C to +85 C 16 QFN EWE -40 C to +85 C 16 Wide SO AK -55 C to +15 C 16 CERIP *Contact factory for dice specifications. K CLEAR Q N.C. K Q RESET ABLE IFFERTIAL 4-CHANNEL SEQUTIAL MUX/EMUX Pin Configurations (continued) TOP VIEW A 1 1 S1 11 S 3 G S5 S3 4 9 S S1A 11 S1B SA 3 G SB S3A 4 9 S3B 5 6 S4 S8 S7 S4A A B S4B 7 8 QFN QFN 8
9 Chip Topographies 9
10 Package Information (The package drawing(s) in this data sheet may not reflect the most current specifications. For the latest package outline information go to 3L QFN.EPS PACKAGE OUTLINE, 16,0,8,3L QFN, 5x5x0.90 MM I 1 10
11 Package Information (continued) (The package drawing(s) in this data sheet may not reflect the most current specifications. For the latest package outline information go to PACKAGE OUTLINE, 16,0,8,3L QFN, 5x5x0.90 MM I Maxim cannot assume responsibility for use of any circuitry other than circuitry entirely embodied in a Maxim product. No circuit patent licenses are implied. Maxim reserves the right to change the circuitry and specifications without notice at any time. Maxim Integrated Products, 10 San Gabriel rive, Sunnyvale, CA Maxim Integrated Products Printed USA is a registered trademark of Maxim Integrated Products.
Precision, 8-Channel/Dual 4-Channel, High-Performance, CMOS Analog Multiplexers
9-027; Rev 2; 8/02 Precision, 8-Channel/Dual 4-Channel, General Description The / precision, monolithic, CMOS analog multiplexers (muxes) offer low on-resistance (less than 0Ω), which is matched to within
More informationPrecision, 16-Channel/Dual 8-Channel, High-Performance, CMOS Analog Multiplexers
9-27; Rev 3; 3/ Precision, 6-Channel/Dual 8-Channel, General Description The MA36/MA37 precision, monolithic, CMOS analog multiplexers (muxes) offer low on-resistance (less than Ω), which is matched to
More informationLOW HIGH OFF ON. Maxim Integrated Products 1
9-79; Rev ; /07 Low-Voltage, Quad, SPST General Description The MAX0/MAX/MAX are quad, low-voltage, single-pole/single-throw (SPST) analog switches. On-resistance (00Ω, max) is matched between switches
More information8-Ch/Dual 4-Ch High-Performance CMOS Analog Multiplexers
8-Ch/ual 4-Ch High-Performance CMOS Analog Multiplexers Low On-Resistance r S(on) : Low Charge Injection Q: pc Fast Transition Time t TRANS : 6 ns Low Power I SUPPLY : A Single Supply Capability 44-V Supply
More informationPin Configurations/Functional Diagrams/Truth Tables IN V+ GND SOT23-6* MAX4544 ON OFF OFF ON SWITCHES SHOWN FOR "0" INPUT. Maxim Integrated Products 1
9-; Rev ; / Low-Voltage, Single-Supply General Description The MAX MAX are precision, dual analog switches designed to operate from a single +.V to +V supply. Low power consumption (µw) makes these parts
More informationLow-Leakage, CMOS Analog Multiplexers
/ General Description The / are monolithic, CMOS analog multiplexers (muxes). The 8-channel is designed to connect one of eight inputs to a common output by control of a 3-bit binary address. The dual,
More informationMAX14753 V DD INA0 INA1 INA2 INA3 OUT INB0 INB1 INB2 INB3
19-4255; Rev 3; 7/10 8-Channel/Dual 4-Channel General Description The are 8-to-1 and dual 4-to-1 high-voltage analog multiplexers. Both devices feature 60Ω (typ) on-resistance with 0.03Ω (typ) on-resistance
More informationLow-Voltage, 8-Channel/Dual 4-Channel Multiplexers with Latchable Inputs
9-396; Rev. ; 5/95 Low-Voltage, 8-Channel/Dual 4-Channel General Description The are low-voltage, CMOS, -of-8 and dual 4-channel muxes with latchable digital inputs. They feature low-voltage operation
More informationPrecision, 16-Channel/Dual 8-Channel, Low-Voltage, CMOS Analog Multiplexers
/ Precision, 6-Channel/Dual 8-Channel, General Description The / low-voltage, CMOS analog multiplexers (muxes) offer low on-resistance (Ω max), which is matched to within 6Ω between switches and remains
More information2Ω, Quad, SPST, CMOS Analog Switches
9-73; Rev ; 4/ 2Ω, Quad, SPST, CMOS Analog Switches General Description The // quad analog switches feature.6ω max on-resistance (R ) when operating from a dual ±5V supply. R is matched between channels
More information8-Channel/Dual 4-Channel, Low-Leakage, CMOS Analog Multiplexers
9-272; Rev 3; /4 8-Channel/Dual 4-Channel, The / are monolithic, CMOS analog multiplexers (muxes). The 8-channel is designed to connect one of eight inputs to a common output by control of a 3-bit binary
More information8-Channel/Dual 4-Channel, Low-Leakage, CMOS Analog Multiplexers
9-272; Rev 3; / 8-Channel/Dual -Channel, The / are monolithic, CMOS analog multiplexers (muxes). The 8-channel is designed to connect one of eight inputs to a common output by control of a 3-bit binary
More informationCOM COM GND MAX4644 OFF OFF
9-7; Rev ; / High-Speed, Low-Voltage, 4, General Description The is a single-pole/double-throw (SPDT) switch that operates from a single supply ranging from +.V to +.V. It provides low 4 on-resistance
More informationPin Configurations/Functional Diagrams/Truth Tables IN V+ GND SOT23-6* MAX4544 ON OFF OFF ON SWITCHES SHOWN FOR "0" INPUT. Maxim Integrated Products 1
9-; Rev ; / Low-Voltage, Single-Supply General Description The are precision, dual analog switches designed to operate from a single +.7V to +V supply. Low power consumption (µw) makes these parts ideal
More informationPrecision, Quad, SPST Analog Switches
9-8; Rev ; 9/ Precision, Quad, SPST Analog Switches General Description The are precision, quad, single-pole single-throw (SPST) analog switches. The MAX364 has four normally closed (N), and the MAX365
More informationDG411CY. Pin Configurations/Functional Diagrams/Truth Tables IN2 DG412 IN3 DIP/SO/TSSOP DG412 LOGIC SWITCH OFF SWITCHES SHOWN FOR LOGIC 0 INPUT
9-728; Rev ; 9/0 Improved, Quad, General escription Maxim s redesigned analog switches now feature low on-resistance matching between switches (Ω max) and guaranteed on-resistance flatness over the signal
More informationImproved, Dual, High-Speed Analog Switches
-477; Rev ; 6/ Improved, ual, High-peed Analog witches General escription Maxim's redesigned G4// analog switches now feature guaranteed low on-resistance matching between switches (Ω max) and guaranteed
More informationLC2 MOS 4-/8-Channel High Performance Analog Multiplexers ADG408/ADG409
a FEATURES 44 upply Maximum Ratings to Analog Signal Range Low On Resistance ( max) Low Power (I SUPPLY < 75 A) Fast Switching Break-Before-Make Switching Action Plug-in Replacement for G408/G409 APPLICATIONS
More informationMAX4636EUB -40 C to +85 C 10 µmax 1 NO1 IN1 GND. 3 x 3 THIN QFN OFF ON ON OFF SWITCHES SHOWN FOR "0" INPUT. Maxim Integrated Products 1
9-79; Rev ; /3 Fast, Low-Voltage, Dual 4 SPDT General Description The are fast, dual 4 singlepole/double-throw (SPDT) analog switches that operate with supply voltages from +.8V to +.V. High switching
More informationMAX4638/MAX Ω, Single 8:1 and Dual 4:1, Low-Voltage Analog Multiplexers
General Description The / are single : and dual : CMOS analog multiplexers/demultiplexers (muxes/ demuxes). Each mux operates from a single +.V to +V supply or dual ±.V supplies. These devices feature.ω
More informationDual High-Speed 1.5A MOSFET Drivers
19-132; Rev 2; 6/6 Dual High-Speed 1.A MOSFET Drivers General Description The are dual monolithic MOSFET drivers designed to tralate TTL/CMOS inputs to high voltage/current outputs. The MAX4426 is a dual
More informationLow-Voltage Analog Temperature Sensors in SC70 and SOT23 Packages
19-2040; Rev 1; 6/01 Low-Voltage Analog Temperature Sensors General Description The precision, low-voltage, analog output temperature sensors are available in 5-pin SC70 and SOT23 packages. The devices
More informationPrecision, Quad, SPDT, CMOS Analog Switch
19-0189; Rev 1; 6/99 Precision, Quad, SPDT, MOS Analog Switch General Description The is a precision, quad, single-pole doublethrow (SPDT) analog switch. The four independent switches operate with bipolar
More informationMiniature Electronically Trimmable Capacitor V DD. Maxim Integrated Products 1
19-1948; Rev 1; 3/01 Miniature Electronically Trimmable Capacitor General Description The is a fine-line (geometry) electronically trimmable capacitor (FLECAP) programmable through a simple digital interface.
More information1 pc Charge Injection, 100 pa Leakage CMOS 5 V/5 V/3 V 4-Channel Multiplexer ADG604
a FEATURES 1 pc Charge Injection (Over the Full Signal Range) 2.7 V to 5.5 V ual Supply 2.7 V to 5.5 ingle Supply Automotive Temperature Range: 4 C to +125 C 1 pa Max @ 25 C Leakage Currents 85 Typ On
More informationHigh-Supply-Voltage, Precision Voltage Reference in SOT23 MAX6035
19-2606; Rev 3; 11/06 High-Supply-Voltage, Precision General Description The is a high-voltage, precision micropower voltage reference. This three-terminal device is available with output voltage options
More informationON OFF PART. Pin Configurations/Functional Diagrams/Truth Tables 5 V+ LOGIC
9-88; Rev ; /7 25Ω SPST Analog Switches in SOT23-6 General Description The are dual-supply single-pole/single-throw (SPST) switches. On-resistance is 25Ω max and flat (2Ω max) over the specified signal
More informationMAX701 N.C. GND DIP/SO
9-90; Rev ; /0 Power-Supply Monitor with Reset General Description The MAX00/MAX0/MAX0 are supervisory circuits used to monitor the power supplies in microprocessor (µp) and digital systems. The / outputs
More informationCMOS, +1.8 V to +5.5 V/ 2.5 V, 2.5 Low-Voltage, 8-/16-Channel Multiplexers ADG706/ADG707 REV. A
a FEATURES +.8 V to +. ingle Supply. V ual Supply. ON Resistance. ON Resistance Flatness pa Leakage Currents ns Switching Times Single -to- Multiplexer AG ifferential 8-to- Multiplexer AG 8-Lead TSSOP
More information4-Pin µp Voltage Monitors with Pin-Selectable Power-On Reset Timeout Delay
19-1122; Rev 3; 12/05 4-Pin µp oltage Monitors with Pin-Selectable General Description The microprocessor (µp) supervisory circuits monitor power supplies in µp and digital systems. They provide excellent
More information35Ω, Low-Voltage, SPST/SPDT Analog Switches in UCSP Package
19-1994; Rev 3; 2/3 35, Low-Voltage, SPST/SPDT General Description The low on-resistance (R ON ), low-voltage analog switches operate from a single +2.V to +5.5V supply. The / are single-pole/single-throw
More informationonlinecomponents.com
a FEATURES +.8 V to +. ingle Supply 2. V ual Supply 2. ON Resistance. ON Resistance Flatness pa Leakage Currents 4 ns Switching Times Single 6-to- Multiplexer AG76 ifferential 8-to- Multiplexer AG77 28-Lead
More informationLow-Cost, Micropower, Low-Dropout, High-Output-Current, SOT23 Voltage References
19-1613; Rev 3; 3/2 Low-Cost, Micropower, Low-Dropout, General Description The are low-cost, low-dropout (LDO), micropower voltage references. These three-terminal references are available with output
More information3.5Ω (max) at +3V PART. MAX4733EUA -40 C to +85 C 8 µmax MAX4732. Pin Configurations/Functional Diagrams/Truth Tables TOP VIEW (BUMPS ON BOTTOM) NC1
9-264; Rev 2 2/6 Ω, Dual SPST Analog Switches in UCSP General Description The MAX473// low-voltage, dual, single-pole/single-throw (SPST) analog switches operate from a single +2V to +V supply and handle
More informationIN1 IN2 DG412 GND IN3 IN4 DIP/SO/TSSOP DG412 LOGIC SWITCH OFF SWITCHES SHOWN FOR LOGIC 0 INPUT
9-4728; Rev 7; 9/08 Improved, Quad, General escription Maxim s redesigned analog switches now feature low on-resistance matching between switches (3Ω max) and guaranteed on-resistance flatness over the
More informationPART TOP VIEW. Maxim Integrated Products 1
9-96; Rev ; 2/ 45, SPDT Analog Switch in SOT23-8 General Description The is a dual-supply, single-pole/doublethrow (SPDT) analog switch. On-resistance is 45 max and flat (7 max) over the specified signal
More informationCMOS ±5 V/+5 V/+3 V Triple SPDT Switch ADG633
CMOS ±5 V/+5 V/+3 V Triple SPT Switch AG633 FEATURES ±2 V to ±6 V ual Supply 2 V to 12 ingle Supply Automotive Temperature Range 4 o C to +125 o C
More informationMAX14760/MAX14762/MAX14764 Above- and Below-the-Rails Low-Leakage Analog Switches
19-652; Rev ; 9/11 EVALUATION KIT AVAILABLE MAX1476// General Description The MAX1476// analog switches are capable of passing bipolar signals that are beyond their supply rails. These devices operate
More informationSwitched-Capacitor Voltage Doublers
9-; Rev 3; / Switched-Capacitor Voltage Doublers General Description The ultra-small / monolithic, CMOS charge-pump voltage doublers accept input voltages ranging from +.V to +.V. Their high voltage-conversion
More informationCompact, Dual-Output Charge Pump
9-7; Rev ; 7/97 Compact, Dual-Output Charge Pump General Description The is a CMOS charge-pump DC-DC converter in an ultra-small µmax package. It produces positive and negative outputs from a single positive
More informationCase Outline(s). The case outlines shall be designated in Mil-Std-1835 and as follows:
+SCOPE: TTL COMPATIBLE CMOS ANALOG SWITCHES Device Type Generic Number 0 DG300A(x)/883B 02 DG30A(x)/883B 03 DG302A(x)/883B 04 DG303A(x)/883B Case Outline(s). The case outlines shall be designated in Mil-Std-835
More informationPART. Maxim Integrated Products 1
9-704; Rev 5; /09 Improved Precision Micropower General Description The is a precision two-terminal shunt mode, bandgap voltage reference with a fixed reverse breakdown voltage of.225v. Ideal for space-critical
More informationDevice Type Generic Number Circuit Function 01 DG406A(x)/883B 16-Channel Analog Multiplexer 02 DG407A(x)/883B Dual 8-Channel Analog Multiplexer
SCOPE: IMPROVED 6-CHANNEL/DUAL 8-CHANNEL, HIGH PERFORMANCE CMOS ANALOG MULTIPLEXER Device Type Generic Number Circuit Function 0 DG406A(x)/883B 6-Channel Analog Multiplexer DG407A(x)/883B Dual 8-Channel
More informationLC 2 MOS Precision Analog Switch in MSOP ADG419-EP
LC 2 MOS Precision Analog Switch in MSOP AG49-EP FEATURES 44 V supply maximum ratings VSS to V analog signal range Low on resistance:
More informationFour-Channel Thermistor Temperature-to-Pulse- Width Converter
19-234; Rev ; 1/2 General Description The four-channel thermistor temperature-topulse-width converter measures the temperatures of up to four thermistors and converts them to a series of output pulses
More informationTOP VIEW. Maxim Integrated Products 1
9-2266; Rev 2; 6/3 3ppm/ C, Low-Power, Low-Dropout General Description The high-precision, low-power, low-dropout voltage reference features a low 3ppm/ C (max) temperature coefficient and a low dropout
More informationPrecision, Quad, SPST Analog Switches
-0; Rev ; /0 Precision, Quad, SPST nalog Switches General escription The are precision, quad, single-pole single-throw (SPST) analog switches. The MX has four normally closed (N), and the MX has four normally
More informationImproved Quad CMOS Analog Switches
Improved Quad CMOS Analog Switches DG211B, DG212B DESCRIPTION The DG211B, DG212B analog switches are highly improved versions of the industry-standard DG211, DG212. These devices are fabricated in proprietary
More informationLow-Voltage Single SPDT Analog Switch
Low-Voltage Single SPDT Analog Switch DG22 DESCRIPTION The DG22 is a single-pole/double-throw monolithic CMOS analog switch designed for high performance switching of analog signals. Combining low power,
More informationPS381/PS383/PS385. Precision, 17V Analog Switches. Features. Applications. Functional Diagrams, Pin Configurations, and Truth Tables
79797979797979797979797979 Features Low On-Resistance (Ω typ) Minimizes Distortion and Error Voltages Low Glitching Reduces Step Errors in Sample-and-Holds. Charge Injection, pc typ Single Supply (+V to
More informationPART MAX1666SEEE MAX1666XEEP UVO V CC REF MAX1666A/V UVA MMA WRN CGI. Maxim Integrated Products 1
19-1465; Rev 3; 11/04 General Description The MAX1666 provides complete protection against overvoltage, undervoltage, overcharge current, overdischarge current, and cell mismatch for 2-cell to 4-cell lithium-ion
More informationPrecision 8-Ch/Dual 4-Ch Low Voltage Analog Multiplexers
Precision 8-Ch/ual 4-Ch Low Voltage Analog Multiplexers ESCRIPTION The G948, G949 uses BiCMOS wafer fabrication technology that allows the G948, G949 to operate on single and dual supplies. Single supply
More information3-Pin Microprocessor Reset Circuits
19-0344; Rev 6; 12/05 3-Pin Microprocessor Reset Circuits General Description The MAX803/MAX809/MAX810 are microprocessor (µp) supervisory circuits used to monitor the power supplies in µp and digital
More informationFeatures. Functional Diagrams, Pin Configurations, and Truth Tables
Features Low On-Resistance (Ω typ) Minimizes Distortion and Error Voltages Low Glitching Reduces Step Errors in Sample-and-Holds. Charge Injection, pc typ Single-Supply Operation (+.V to +1V) Improved
More informationUltra-Low-Power Series Voltage Reference
19-257; Rev 2; 3/5 Ultra-Low-Power Series Voltage Reference General Description The micropower, low-dropout bandgap voltage reference combines ultra-low supply current and low drift in a miniature 5-pin
More informationAG726/AG732 SPECIFICATIONS ( = V %, = V, GN = V, unless otherwise noted.) B Version 4 C Parameter +2 C to +8 C Unit Test Conditions/Comments ANALOG SW
a FEATURES.8 V to. ingle Supply 2. V ual-supply Operation 4 On Resistance. On Resistance Flatness 48-Lead TQFP or 48-Lead 7 mm 7 mm CSP Packages Rail-to-Rail Operation 3 ns Switching Times Single 32-to-
More informationLow-Voltage Single SPDT Analog Switch
Low-Voltage Single SPDT Analog Switch DG22 DESCRIPTION The DG22 is a single-pole/double-throw monolithic CMOS analog switch designed for high performance switching of analog signals. Combining low power,
More informationPART. Maxim Integrated Products 1
9-79; Rev ; 9/ SC7 Inverting Charge Pumps General Description The / monolithic, CMOS chargepump voltage inverters in the ultra-small SC7 package feature a low Ω output resistance, permitting loads up to
More informationMAX TEMPCO (ppm/ C) INITIAL ERROR (mv)
19-0887; Rev 7; /07 General Description The are industry-standard precision voltage references. The stable 10V output of the REF01 can be adjusted over a ±% range with minimal effect on temperature stability.
More informationImproved, SPST/SPDT Analog Switches
9-0; Rev 2; 2/96 Improved, PT/PT nalog witches General escription Maxim s redesigned G7/G/G9 precision, CMO, monolithic analog switches now feature guaranteed on-resistance matching (3Ω max) between switches
More information3.2, Fast Switching Speed, +12 V / +5 V / +3 V / ± 5 V, 4- / 8-Channel Analog Multiplexers
G948E, G949E 3.2, Fast Switching Speed, +12 V / +5 V / +3 V / ± 5 V, 4- / 8-Channel Analog Multiplexers ESCRIPTION The G948E, G949E uses BiCMOS wafer fabrication technology that allows the G948E, G949E
More informationN.C. OUT. Maxim Integrated Products 1
19-2892; Rev 2; 11/6 Ultra-Low-Power Precision Series General Description The MAX629 micropower, low-dropout bandgap voltage reference combines ultra-low supply current and low drift in a miniature 5-pin
More informationTOP VIEW V L GND I/O V L GND
19-1847; Rev 3; 5/9 1µA, 2Mbps, Low-Voltage Level Tralators in SC7 and µdfn General Description The MAX337/ logic-level tralators are ideal for applicatio interfacing low-voltage devices to other logic
More informationPeriod/Frequency Output
/ General Description The / are low-cost, low-current temperature sensors with a single-wire output. The converts the ambient temperature into a square wave with a period proportional to absolute temperature
More informationPrecision, Micropower, Low-Dropout, High- Output-Current, SO-8 Voltage References
19-165; Rev ; 7/ Precision, Micropower, Low-Dropout, High- General Description The MAX6167 are precision, low-dropout, micropower voltage references. These three-terminal devices operate with an input
More informationPrecision, Low-Power, Low-Dropout, SOT23-3 Voltage References
19-777; Rev 3; /01 General Description The /MAX6021/MAX6025/MAX6030/MAX601/ MAX605/ precision, low-dropout, micropower voltage references are available in miniature SOT23-3 surface-mount packages. They
More information74LV374 Octal D-type flip-flop; positive edge-trigger (3-State) INTEGRATED CIRCUITS
INTEGRATE CIRCUITS Octal -type flip-flop; positive edge-trigger (3-State) Supersedes data of 1996 Feb IC24 ata Handbook 1997 Mar 20 FEATURES Wide operating voltage: 1.0 to 5.5 Optimized for Low oltage
More informationLow-Power, High-Speed CMOS Analog Switches
Low-Power, High-Speed MOS Analog es G41/43/4 ESRIPTION The G41/43/4 monolithic analog switches were designed to provide precision, high performance switching of analog signals. ombining low power (.3 µw,
More information3-Pin Microprocessor Reset Circuits
19-0344; Rev 7; 2/10 3-Pin Microprocessor Reset Circuits General Description The MAX803/MAX809/MAX810 are microprocessor (µp) supervisory circuits used to monitor the power supplies in µp and digital systems.
More information74LVC374 Octal D-type flip-flop; positive edge-trigger (3-State) INTEGRATED CIRCUITS
INTEGRATE CIRCUITS Octal -type flip-flop; positive edge-trigger (3-State) Supersedes data of February 1996 IC24 ata Handbook 1997 Mar 12 FEATURES Wide supply voltage range of 1.2V to 3.6V In accordance
More informationLow Voltage 400 MHz Quad 2:1 Mux with 3 ns Switching Time ADG774A
a FEATURE Bandwidth >4 MHz Low Insertion Loss and On Resistance: 2.2 Typical On-Resistance Flatness.3 Typical ingle 3 V/5 upply Operation Very Low istortion:
More informationHigh Speed Quad SPST CMOS Analog Switch
High Speed Quad SPST CMOS Analog Switch HI-21HS/883 The HI-21HS/883 is a monolithic CMOS analog switch featuring very fast switching speeds and low ON resistance. This integrated circuit consists of four
More informationDG211. Features. SPST 4-Channel Analog Switch. Part Number Information. Functional Block Diagrams. Pinout. Data Sheet December 21, 2005 FN3118.
Data Sheet FN3118.4 SPST 4-Channel Analog Switch The is a low cost, CMOS monolithic, Quad SPST analog switch. It can be used in general purpose switching applications for communications, instrumentation,
More informationLE Ω SECOND SOURCE BLEED RESISTORS PART. Maxim Integrated Products 1 MAX4800A MAX4802A. TQFP 7mm x 7mm ; Rev 0; 5/08 N.C. (RGND) TOP VIEW GND
19-4120; Rev 0; 5/08 Ω Ω μ TOP VIEW DIN VDD GND (RGND) VNN 36 35 34 33 32 31 30 29 28 27 26 25 PART BED RESISTORS SECOND SOURCE PIN- PACKAGE CXZ+* No 26 CSBGA CQI+ No HV2203PJ-G 28 PLCC CCM+* No HV2203FG-G
More informationPrecision, Quad, SPST Analog Switches
9-022; Rev ; 4/94 Precision, Quad, SPST nalog Switches General escription The are precision, quad, single-pole single-throw (SPST) analog switches. The MX35 has four normally closed (N), and the MX352
More information1ppm/ C, Low-Noise, +2.5V/+4.096V/+5V Voltage References
19-123; Rev 1; 1/1 1ppm/ C, Low-Noise, +2.5V/+4.96V/+5V General Description The // are low-noise, precision voltage references with extremely low,.5ppm/ C typical temperature coefficients and excellent,
More informationNTE74HC109 Integrated Circuit TTL High Speed CMOS, Dual J K Positive Edge Triggered Flip Flop w/set & Reset
NTE74HC109 Integrated Circuit TTL High Speed CMOS, Dual J K Positive Edge Triggered Flip Flop w/set & Reset Description: The NTE74HC109 is a dual J K flip flip with set and reset in a 16 Lead plastic DIP
More informationMM74C150 MM82C19 16-Line to 1-Line Multiplexer 3-STATE 16-Line to 1-Line Multiplexer
MM74C150 MM82C19 16-Line to 1-Line Multiplexer 3-STATE 16-Line to 1-Line Multiplexer General Description The MM74C150 and MM82C19 multiplex 16 digital lines to 1 output. A 4-bit address code determines
More informationSC70, 1.6V, Nanopower, Beyond-the-Rails Comparators With/Without Reference
19-1862; Rev 4; 1/7 SC7, 1.6V, Nanopower, Beyond-the-Rails General Description The nanopower comparators in space-saving SC7 packages feature Beyond-the- Rails inputs and are guaranteed to operate down
More informationRegulated 3.3V Charge Pump MAX679
19-1217; Rev ; 4/97 Regulated 3.3 Charge Pump General Description The step-up, regulated charge pump generates a 3.3 ±4% output voltage from a 1.8 to 3.6 input voltage (two alkaline, NiCd, or NiMH; or
More informationMAX471/MAX472 PART TEMP. RANGE PIN-PACKAGE. MAX471EPA 0 C to +70 C
19-; Rev 2; 12/96 µ µ µ µ PART TEMP. RANGE PIN-PACKAGE CPA CSA EPA C to +7 C C to +7 C -4 C to +8 C 8 Plastic DIP 8 SO 8 Plastic DIP ESA -4 C to +8 C 8 SO CPA C to +7 C 8 Plastic DIP CSA C to +7 C 8 SO
More informationPowered-off Protection, 6, 1.8 V to 5.5 V, SPDT Analog Switch (2:1 Multiplexer)
Powered-off Protection,, 1. V to 5.5 V, SPDT Analog Switch (:1 Multiplexer) DESCRIPTION The is a high performance single-pole, double-throw (SPDT) analog switch designed for 1. V to 5.5 V operation with
More informationINTEGRATED CIRCUITS. 74LV273 Octal D-type flip-flop with reset; positive-edge trigger. Product specification 1997 Apr 07 IC24 Data Handbook
INTEGRATED CIRCUITS Octal D-type flip-flop with reset; positive-edge trigger 1997 Apr 07 IC24 Data Handbook FEATURES Wide operating voltage: 1.0 to 5.5V Optimized for Low Voltage applications: 1.0 to 3.6V
More informationDG2707. High Speed, Low Voltage, 3, Differential 4:1 CMOS Analog Multiplexer/Switch. Vishay Siliconix FEATURES DESCRIPTION APPLICATIONS
G2707 High Speed, Low Voltage, 3, ifferential 4:1 CMOS Analog Multiplexer/Switch ESCRIPTION The G2707 is a high speed, low voltage, 3, differential 4:1 multiplexer. It operates from a 1.65 V to 4.3 V single
More informationINTEGRATED CIRCUITS. 74LV stage binary ripple counter. Product specification 1998 Jun 23 IC24 Data Handbook
INTEGRATED CIRCUITS 1998 Jun 23 IC24 Data Handbook FEATURES Optimized for Low Voltage applications: 1.0 to 5.5V Accepts TTL input levels between V CC = 2.7V and V CC = 3.6V Typical V OLP (output ground
More information74LV393 Dual 4-bit binary ripple counter
INTEGRATED CIRCUITS Supersedes data of 1997 Mar 04 IC24 Data Handbook 1997 Jun 10 FEATURES Optimized for Low Voltage applications: 1.0 to.6v Accepts TTL input levels between V CC = 2.7V and V CC =.6V Typical
More informationINTEGRATED CIRCUITS. 74LVC138A 3-to-8 line decoder/demultiplexer; inverting. Product specification 1998 Apr 28
INTEGRATED CIRCUITS -to-8 line decoder/demultiplexer; inverting 998 Apr 8 FEATURES Wide supply voltage range of. to. V In accordance with JEDEC standard no. 8-A Inputs accept voltages up to. V CMOS lower
More information3-Pin, Low-Power μp Reset Circuits MAX6800/MAX6801/ MAX6802. Benefits and Features. General Description. Typical Operating Circuit.
General Description The MAX6800/MAX6801/ microprocessor (μp) supervisory circuits monitor the power supplies in 2.85 to 5.0 μp and digital systems. They increase circuit reliability and reduce cost by
More informationLow-Cost, Low-Voltage, Quad, SPST, CMOS Analog Switches
19-0439; Rev 1; 3/96 ow-ost, ow-voltage, Quad, SPST, General escription The 4066/4066 quad, SPST, MOS analog switches are designed to provide superior performance over the industry-standard devices. These
More informationμp Supervisory Circuits
MAX6351 MAX636 General Description The MAX6351 MAX636 microprocessor (μp) supervisors with multiple reset voltages significantly improve system reliability and accuracy compared to separate ICs or discrete
More informationMAX TEMPCO. INITIAL ERROR (ppm/ C) Plastic DIP 8 CERDIP 8 Plastic DIP 0 C to +70 C Plastic DIP 8 SO REF01CZ 0 C to +70 C 65 ±100
19-0887; Rev 1; 8/99 General Description The REF01 and REF02 are precision voltage references that are pretrimmed to within ±3% of +10V and +5V, respectively. Both references feature excellent temperature
More informationDG417/418/419. Precision CMOS Analog Switches. Features Benefits Applications. Description. Functional Block Diagram and Pin Configuration
G417/418/419 Precision MO Analog witches Features Benefits Applications 1-V Analog ignal Range On-Resistance r (on) : 2 Fast witching Action t ON : 1 ns Ultra Low Power Requirements P :3 nw TTL and MO
More informationINTEGRATED CIRCUITS. 74LV688 8-bit magnitude comparator. Product specification Supersedes data of 1997 May 15 IC24 Data Handbook.
INTEGRATED CIRCUITS Supersedes data of 1997 May 15 IC24 Data Handbook 1998 Jun 23 FEATURES Wide operating voltage: 1.0 to 5.5V Optimized for low voltage applications: 1.0V to 3.6V Accepts TTL input levels
More information1 pc Charge Injection, 100 pa Leakage, CMOS 5 V/+5 V/+3 V Quad SPST Switches ADG611/ADG612/ADG613
a FEATURE 1 pc Charge Injection 2.7 V to 5.5 V ual upply +2.7 V to +5.5 V ingle upply Automotive Temperature Range 4 C to +125 C 1 pa Max @ 25 C Leakage Currents 85 On-Resistance Rail-to-Rail witching
More informationPowered-off Protection, 1, 1.8 V to 5.5 V, SPDT Analog Switch (2:1 Multiplexer)
DGE Powered-off Protection,,.8 V to 5.5 V, SPDT Analog Switch (: Multiplexer) DESCRIPTION The DGE is a high performance single-pole, double-throw (SPDT) analog switch designed for.8 V to 5.5 V operation
More information74HC General description. 2. Features. Octal D-type flip-flop; positive-edge trigger; 3-state; inverting
Rev. 03 11 November 2004 Product data sheet 1. General description 2. Features The is a high-speed Si-gate CMOS device and is pin compatible with low-power Schottky TTL (LSTTL). The is specified in compliance
More informationINTEGRATED CIRCUITS. 74LV00 Quad 2-input NAND gate. Product specification Supersedes data of 1998 Apr 13 IC24 Data Handbook.
INTEGRATED CIRCUITS Supersedes data of 1998 Apr 13 IC24 Data Handbook 1998 Apr 20 FEATURES Wide operating voltage: 1.0 to 5.5 V Optimized for low voltage applications: 1.0 to 3.6 V Accepts TTL input levels
More informationMM74C912 6-Digit BCD Display Controller/Driver
6-Digit BCD Display Controller/Driver General Description The display controllers are interface elements, with memory, that drive a 6-digit, 8-segment LED display. The display controllers receive data
More informationDual 3-channel analog multiplexer/demultiplexer with supplementary switches
with supplementary switches Rev. 03 16 December 2009 Product data sheet 1. General description 2. Features 3. Applications 4. Ordering information The is a dual 3-channel analog multiplexer/demultiplexer
More informationINT RST TEMP RANGE PIN- PACKAGE TOP MARK PKG CODE PART. -40 C to +125 C -40 C to +125 C 16 QSOP E16-4 MAX7323AEE+ 16 TQFN-EP* 3mm x 3mm MAX7323ATE+
19-3806; Rev 1; 7/07 INT RST Ω μ PART MAX7323AEE+ MAX7323ATE+ * TEMP RANGE -40 C to +125 C -40 C to +125 C PIN- PACKAGE TOP MARK PKG CODE 16 QSOP E16-4 16 TQFN-EP* 3mm x 3mm ADE T1633-4 PART INPUTS INTERRUPT
More information