3.5Ω (max) at +3V PART. MAX4733EUA -40 C to +85 C 8 µmax MAX4732. Pin Configurations/Functional Diagrams/Truth Tables TOP VIEW (BUMPS ON BOTTOM) NC1

Size: px
Start display at page:

Download "3.5Ω (max) at +3V PART. MAX4733EUA -40 C to +85 C 8 µmax MAX4732. Pin Configurations/Functional Diagrams/Truth Tables TOP VIEW (BUMPS ON BOTTOM) NC1"

Transcription

1 9-264; Rev 2 2/6 Ω, Dual SPST Analog Switches in UCSP General Description The MAX473// low-voltage, dual, single-pole/single-throw (SPST) analog switches operate from a single +2V to +V supply and handle railto-rail analog signals. These switches exhibit low leakage current (.na) and consume less than.nw (typ) of quiescent power, making them ideal for batterypowered applications. When powered from a +3V supply, these switches feature Ω (max) on-resistance (R ON ) with 3.Ω (max) matching between channels, and 9Ω (max) flatness over the specified signal range. The MAX473 has two normally open (NO) switches, the has two normally closed (NC) switches, and the has one NO and one NC switch. The MAX473// are available in 9-bump chip-scale packages (UCSP ), along with -pin TDFN and -pin µmax packages. The tiny UCSP occupies a.2mm.2mm area and significantly reduces the required PC board area. Applications Battery-Powered Systems Audio/Video-Signal Routing Low-Voltage Data-Acquisition Systems Cell Phones Communications Circuits PDAs UCSP is a trademark of Maxim Integrated Products, Inc. µmax is a registered trademark of Maxim Integrated Products, Inc. Features.2mm.2mm UCSP Package Guaranteed On-Resistance (R ON ) 2Ω (max) at +V Ω (max) at +3V On-Resistance Matching 3Ω (max) at +V 3.Ω (max) at +3V Guaranteed <.na Leakage Current at T A = +2 C Single-Supply Operation from +2.V to +V TTL/CMOS-Logic Compatible -db Crosstalk (MHz) -72dB Off-Isolation (MHz) Low Power Consumption:.nW (typ) Rail-to-Rail Signal Handling PART Ordering Information TEMP RANGE PIN/BUMP- PACKAGE TOP MARK MAX473EUA -4 C to + C µmax MAX473ETA -4 C to + C TDFN-EP** ALG MAX473EBL- -4 C to + C 9 UCSP-9 ABV EUA -4 C to + C µmax ETA -4 C to + C TDFN-EP** ALH EBL- -4 C to + C 9 UCSP-9 ABT EUA -4 C to + C µmax ETA -4 C to + C TDFN-EP** ALI EBL- -4 C to + C 9 UCSP-9 ABS *Future product contact factory for availability. **EP = Exposed pad. Pin Configurations/Functional Diagrams/Truth Tables MAX473// TOP VIEW (BUMPS ON BOTTOM) NO A MAX473 COM A2 A3 NO MAX473 TOP VIEW (BUMPS ON BOTTOM) NC A COM A2 A3 NC IN B B3 COM 2 7 IN IN B B3 COM 2 7 IN C C2 C3 UCSP NO2 3 4 TDFN 6 NO2 C C2 C3 UCSP 3 4 TDFN 6 Pin Configurations/Functional Diagrams/Truth Tables continued at end of data sheet. MAX473 IN_ NO_ OFF ON SWITCHES SHOWN FOR LOGIC "" INPUT IN_ NC_ ON OFF SWITCHES SHOWN FOR LOGIC "" INPUT Maxim Integrated Products For pricing, delivery, and ordering information, please contact Maxim/Dallas Direct! at , or visit Maxim s website at

2 MAX473// ABSOLUTE MAXIMUM RATINGS (All voltages referenced to.)...-.3v to +2V IN_, COM_, NO_, NC_ (Note )...-.3V to ( +.3V) Continuous Current (any pin)...±ma Peak Current (any pin, pulsed at ms, % duty cycle)...±2ma Continuous Power Dissipation (T A = +7 C) -Pin µmax (derate 4.mW/ C above +7 C)...362mW -Pin TDFN (derate 24.4mW/ C above +7 C)...9mW 9-Bump UCSP (derate 4.7mW/ C above +7 C)...379mW ELECTRICAL CHARACTERISTICS Single +3V Supply Operating Temperature Range...-4 C to + C Storage Temperature Range...-6 C to + C Maximum Junction Temperature...+ C Lead Temperature (soldering, s)...+3 C Bump Temperature (soldering, Note 2) Infrared (s) C Vapor Phase (6s)...+2 C Note : Signals on IN_, NO_, NC_, or COM_ exceeding or are clamped by internal diodes. Limit forward-diode current to maximum current rating. Note 2: This device is constructed using a unique set of packaging techniques that impose a limit on the thermal profile the device can be exposed to during board level solder attach and rework. This limit permits only the use of the solder profiles recommended in the industry-standard specification, JEDEC 2A, paragraph 7.6, Table 3 for IR/VPR and Convection reflow. Preheating is required. Hand or wave soldering is not allowed. Stresses beyond those listed under Absolute Maximum Ratings may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated in the operational sections of the specifications is not implied. Exposure to absolute maximum rating conditions for extended periods may affect device reliability. ( = +3V ±%, V IH = +2.V, V IL = +.V, T A =, unless otherwise noted. Typical values are at = +3V, T A = +2 C.) (Notes 3, 4) ANALOG SWITCH PARAMETER SYMBOL CONDITIONS T A MIN TYP MAX UNITS Analog Signal Range V COM_, V NO_, V NC_ V On-Resistance R ON I COM_ = ma; = +2.7V, V NO_ or V NC_ = +.V On-Resistance Matching Between Channels (Notes, 6) On-Resistance Flatness (Note 7) NO_ or NC_ Off-Leakage Current (Note ) COM_ Off-Leakage Current (Note ) COM_ On-Leakage Current (Note ) R ON R FLAT(ON) I NO_(OFF) I NC_(OFF) I COM_(OFF) I COM_(ON) = +2.7V, I COM_ = ma; V NO_ or V NC_ = +.V = +2.7V, I COM_ = ma; V NO_ or V NC_ = +V, +.V, +2V = +3.6V, V COM_ = +.3V, +3V; V NO_ or V NC_ = +3V, +.3V = +3.6V, V COM_ = +.3V, +3V; V NO_ or V NC_ = +3V, +.3V = +3.6V, V COM_ = +.3V, +3.V; V NO_ or V NC_ = +.3V, +3V, or floating +2 C C C C C C Ω Ω Ω na na na 2

3 ELECTRICAL CHARACTERISTICS Single +3V Supply (continued) ( = +3V ±%, V IH = +2.V, V IL = +.V, T A =, unless otherwise noted. Typical values are at = +3V, T A = +2 C.) (Notes 3, 4) PARAMETER SYMBOL CONDITIONS T A MIN TYP MAX UNITS DYNAMIC CHARACTERISTICS Turn-On Time t ON R L = 3Ω, V NO_ or V NC_ = +.V, C L = 3pF, Figure 2 Turn-Off Time t OFF R L = 3Ω, C L = 3pF, V NO_ or V NC_ = +.V, Figure 2 Break-Before-Make ( Only, Note ) Charge Injection t BBM Q V NO_ or V NC_ = +.V, R L = 3Ω, C L = 3pF, Figure 3 V GEN = V, R GEN =, C L =.nf, Figure 4 +2 C C C 4 ns ns ns +2 C 7. pc On-Channel -3dB Bandwidth BW Signal = dbm, Ω in and out +2 C 3 MHz Off-Isolation (Note 9) V ISO R L = Ω, C L = pf, f = MHz, V COM_ = V RMS, Figure Crosstalk (Note ) V CT R L = Ω, C L = pf, f = MHz, V COM_ = V RMS, Figure 6 +2 C -72 db +2 C - db NO_ or NC_ Off-Capacitance C OFF f = MHz, Figure 7 +2 C 2 pf COM_ Off-Capacitance C COM_(OFF) f = MHz, Figure 7 +2 C 2 pf COM_ On-Capacitance C COM_(ON) f = MHz, Figure 7 +2 C 4 pf LOGIC INPUT Input Logic High V IH.4 V Input Logic Low V IL. V Input Leakage Current I IN V IN_ = V or µa SUPPLY Power-Supply Range 2. V Positive Supply Current I+ = +.V, V IN_ = V or, all switches on or off. µa MAX473// 3

4 MAX473// ELECTRICAL CHARACTERISTICS Single +V Supply ( = +V ±%, V IH = +2.V, V IL = +.V, T A =, unless otherwise noted. Typical values are at = +V, T A = +2 C.) (Notes 3, 4) ANALOG SWITCH PARAMETER SYMBOL CONDITIONS T A MIN TYP MAX UNITS Analog Signal Range V COM_, V NO_, V NC_ V On-Resistance R ON I COM_ = ma, = +4.V, V NO_ or V NC_ = +3.V On-Resistance Matching Between Channels (Notes, 6) On-Resistance Flatness (Note 7) NO_ or NC_ Off-Leakage Current (Note ) COM_ Off-Leakage Current (Note ) COM_ On-Leakage Current (Note ) DYNAMIC CHARACTERISTICS R ON R FLAT(ON) I NO_(OFF) I NC_(OFF) I COM_(OFF) I COM_(ON) = +4.V, I COM_ = ma, V NO_ or V NC_ = +3.V = +4.V, I COM_ = ma, V NO_ or V NC_ = +V, +2V, +3V = +.V, V COM_ = +V, +4.V; V NO_ or V NC_ = +4.V, +V = +.V, V COM_ = +V, +4.V; V NO_ or V NC_ = +4.V, +V = +.V, V COM_ = +V, +4.V; V NO_ or V NC_ = +V, +4.V, or floating Turn-On Time t ON R L = 3Ω, C L = 3pF, V NO_ or V NC_ = +3.V, Figure 2 Turn-Off Time t OFF R L = 3Ω, C L = 3pF, V NO_ or V NC_ = +3.V, Figure 2 Break-Before-Make ( Only, Note ) t BBM V NO_ or V NC_ = +3.V, R L = 3Ω, C L = 3pF, Figure 3 +2 C C C C C C C C C 2 Ω Ω Ω na na na ns ns ns Charge Injection Q V GEN = V, R GEN =, C L =.nf, Figure 4 +2 C 7. pc On-Channel Bandwidth BW Signal = dbm, Ω in and out Off-Isolation (Note 9) V ISO R L = Ω, C L = pf, f = MHz, V COM_ = V RMS, Figure +2 C 3 MHz +2 C -72 db 4

5 ELECTRICAL CHARACTERISTICS Single +V Supply ( = +V ±%, V IH = +2.V, V IL = +.V, T A =, unless otherwise noted. Typical values are at = +V, T A = +2 C.) (Notes 3, 4) PARAMETER SYMBOL CONDITIONS T A MIN TYP MAX UNITS Crosstalk (Note ) V CT R L = Ω, C L = pf, f = MHz, V COM_ = V RMS, Figure 6 +2 C - db NO_ or NC_ Off-Capacitance C OFF f = MHz, Figure 7 +2 C 2 pf COM_ Off-Capacitance C COM_(OFF) f = MHz, Figure 7 +2 C 2 pf COM_ On-Capacitance C COM_(ON) f = MHz, Figure 7 +2 C 4 pf LOGIC INPUT Input Logic High V IH 2. V Input Logic Low V IL. V Input Leakage Current I IN V IN_ = V or µa SUPPLY Power-Supply Range 2. V Positive Supply Current I+ = +.V, V IN_ = V or, all switches on or off. µa Note 3: The algebraic convention, where the most negative value is a minimum and the most positive value a maximum, is used in this data sheet. Note 4: UCSP and TDFN parts are % tested at +2 C only, and guaranteed by design over temperature. µmax parts are % tested at + C and +2 C and guaranteed by design over temperature. Note : R ON = R ON(MAX) - R ON(MIN). Note 6: UCSP on-resistance matching between channels and on-resistance flatness guaranteed by design. Note 7: Flatness is defined as the difference between the maximum and minimum value of on-resistance as measured over the specified analog signal range. Note : Guaranteed by design. Note 9: Off-Isolation = 2 log (V NO_ /V COM_ ), V NO_ = output, V COM_ = input to off switch. Note : Between any two switches. MAX473//

6 MAX473// (T A = +2 C, unless otherwise noted.) RON (Ω) RON (Ω) ON-RESISTANCE vs. V COM = +2.V = +3.V = +.V V COM (V) ON-RESISTANCE vs. V COM ( = +.V) T A = +2 C T A = + C = +.V T A = -4 C MAX toc MAX toc4 RON (Ω) ON/OFF-LEAKAGE CURRENT (pa) ON-RESISTANCE vs. V COM ( = +2.V) T A = +2 C V COM (V) = +V Typical Operating Characteristics T A = -4 C T A = + C ON/OFF-LEAKAGE CURRENT vs. TEMPERATURE ON-LEAKAGE OFF-LEAKAGE MAX toc2 MAXZ toc RON (Ω) CHARGE INJECTION (pc) ON-RESISTANCE vs. V COM ( = +3.V) T A = +2 C T A = + C T A = -4 C V COM (V) CHARGE INJECTION vs. V COM = +.V = +3.V MAX toc3 MAX toc V COM (V) TEMPERATURE ( C) V COM (V) SUPPLY CURRENT (na) SUPPLY CURRENT vs. TEMPERATURE = +V, +3V MAX toc7 LOGIC THRESHOLD VOLTAGE (V) LOGIC THRESHOLD VOLTAGE vs. SUPPLY VOLTAGE V IN RISING OR FALLING MAX toc ton/off (ns) TURN-ON/OFF TIME vs. SUPPLY VOLTAGE t ON t OFF MAX toc TEMPERATURE ( C) (V) (V) 6

7 (T A = +2 C, unless otherwise noted.) ton/off (ns) t ON, = +3.V TURN-ON/OFF TIME vs. TEMPERATURE t ON, = +.V t OFF, t OFF, = +3.V = +.V TEMPERATURE ( C) UCSP PIN MAX toc LOSS (db) Typical Operating Characteristics (continued) k FREQUENCY RESPONSE ON-LOSS OFF-ISOLATION k MAX473 µmax/ TDFN UCSP µmax/ TDFN UCSP M M FREQUENCY (Hz) µmax/ TDFN CROSSTALK = +3V M NAME MAX toc G THD (%)... TOTAL HARMONIC DISTORTION vs. FREQUENCY R L = kω = +3.V R L = kω = +.V R L = kω = +3.V V COM = 2V P-P BW = 3kHz R L = kω = +.V. k k k FREQUENCY (Hz) Pin Description FUNCTION A A NO Analog-Switch Normally Open Terminal A2 2 A2 2 A2 2 COM Analog-Switch Common Terminal A3 4 A3 4 A3 4 Ground. Connect to digital ground. B 7 B 7 B 7 IN Logic-Control Digital Input B3 3 B3 3 B3 3 Logic-Control Digital Input C C C Positive Supply Voltage Input C2 6 C2 6 C2 6 Analog-Switch Common Terminal C3 NO2 Analog-Switch Normally Open Terminal A NC Analog-Switch Normally Closed Terminal C3 C3 Analog-Switch Normally Closed Terminal EP (TDFN only) EP (TDFN only) EP (TDFN only) EP Exposed Pad. Connect to. MAX toc2 MAX473// Applications Information Operating Considerations for High-Voltage Supply The MAX473// operate to +V with some precautions. The absolute maximum rating for is +2V (referenced to ). When operating near this region, bypass with a minimum.µf capacitor to ground as close to the IC as possible. Logic Levels The MAX473// are TTL compatible when powered from a single +V supply. When powered from other supply voltages, the logic inputs should be driven rail-to-rail. For example, with a +V supply, IN and should be driven low to V and high to V. With a +3.3V supply, IN and should be driven low to V and high to 3.3V. Driving IN and railto-rail minimizes power consumption. 7

8 MAX473// Analog Signal Levels Analog signals that range over the entire supply voltage ( to ) pass with very little change in R ON (see Typical Operating Characteristics). The bidirectional switches allow NO_, NC_, and COM_ connections to be used as either inputs or outputs. Power-Supply Sequencing and Overvoltage Protection CAUTION: Do not exceed the absolute maximum ratings. Stresses beyond the listed ratings can cause permanent damage to the devices. Proper power-supply sequencing is recommended for all CMOS devices. Always apply before applying analog signals, especially if the analog signal is not current limited. If this sequencing is not possible, and if the analog inputs are not current limited to < 2mA, add a small-signal diode, D, as shown in Figure. If the analog signal can dip below, add D2. Adding protection diodes reduces the analog signal range to a diode drop (about.7v) below (for D), and to a diode drop above ground (for D2). Leakage is unaffected by adding the diodes. On-resistance increases slightly at low supply voltages. Maximum supply voltage () must not exceed +V. Adding protection diodes causes the logic thresholds to be shifted relative to the power-supply rails. The most significant shift occurs when using low supply voltages (+V or less). With a +V supply, TTL compatibility is not guaranteed when protection diodes are added. Driving IN and all the way to the supply rails (i.e., to a diode drop higher than the pin, or to a diode drop lower than the pin) is always acceptable. Protection diodes D and D2 also protect against some overvoltage situations. Using the circuit in Figure, no damage results if the supply voltage is below the absolute maximum rating (+2V) and if a fault voltage up to the absolute maximum rating ( +.3V) is applied to an analog signal terminal. UCSP Applications Information For the latest application details on USCP construction, dimensions, tape carrier information, printed circuit board techniques, bump-pad layout, and recommended reflow temperature profile as well as the latest information on reliability testing results, go to the Maxim web site at to find the Application Note: UCSP A Wafer-Level Chip-Scale Package. Test Circuits/Timing Diagrams EXTERNAL BLOCKING DIODE NO_ * * EXTERNAL BLOCKING DIODE D D2 * * COM_ MAX473 *INTERNAL PROTECTION DIODES. Figure. Overvoltage Protection Using External Blocking Diodes

9 MAX473 LOGIC INPUT V N_ Figure 2. Switching Time V N_ LOGIC INPUT NO_ OR NC_ IN_ R L 3Ω C L INCLUDES FIXTURE AND STRAY CAPACITANCE. R L V OUT = V N_ ( R ) L + R ON NO IN COM COM_ R L2 3Ω C L INCLUDES FIXTURE AND STRAY CAPACITANCE. V OUT2 Test Circuits/Timing Diagrams (continued) C L2 3pF V OUT C L 3pF R L 3Ω V OUT C L 3pF LOGIC INPUT SWITCH OUTPUT V IH V IL V LOGIC INPUT SWITCH OUTPUT (V OUT ) SWITCH OUTPUT 2 (V OUT2 ) % V OUT t ON t OFF t r < ns t f < ns.9 x V OUT.9 x V OUT LOGIC INPUT WAVEFORMS INVERTED FOR SWITCHES THAT HAVE THE OPPOSITE LOGIC SENSE. V V V % t BBM.9 x V UT t r < ns t f < ns t BBM.9 x V OUT2 MAX473// Figure 3. Break-Before-Make Interval ( only) MAX473 V GEN R GEN NC_ OR NO_ IN_ COM C L nf V OUT V OUT IN OFF ON V OUT OFF V IL TO V IH IN OFF ON Q = ( V OUT )(C L ) OFF IN DEPENDS ON SWITCH CONFIGURATION; INPUT POLARITY DETERMINED BY SENSE OF SWITCH. Figure 4. Charge Injection 9

10 MAX473// SIGNAL GENERATOR dbm ANALYZER R L nf COM_ NC_ OR NO_ nf IN_ MAX473 V IL OR V IH V- NOTE: DUAL SUPPLIES USED TO ACCOMODATE GROUND-REFERENCED INSTRUMENTS. Figure. Off-Isolation/On-Channel Bandwidth CAPACITANCE METER f = MHz nf COM_ NC_ OR NO_ IN_ MAX473 V IL OR V IH Test Circuits/Timing Diagrams (continued) SIGNAL GENERATOR dbm ANALYZER OR 2.4V R L nf COM IN NO2/ nf NO/NC MAX473 Ω OR 2.4V V- NOTE: DUAL SUPPLIES USED TO ACCOMODATE GROUND-REFERENCED INSTRUMENTS. Figure 6. Crosstalk TRANSITOR COUNT: 6 PROCESS: CMOS N.C. Chip Information Figure 7. Channel Off/On-Capacitance

11 TOP VIEW NO COM Pin Configurations/Functional Diagrams/Truth Tables (continued) TOP VIEW (BUMPS ON BOTTOM) NO IN MAX473 µmax A B COM 7 6 A2 UCSP IN NO2 A3 B3 C C2 C3 NC COM NO COM µmax EP TDFN EP = EXPOSED PAD IN IN IN_ NO OFF ON ON OFF SWITCHES SHOWN FOR LOGIC "" INPUT NO COM µmax 7 6 IN MAX473//

12 MAX473// Package Information (The package drawing(s) in this data sheet may not reflect the most current specifications. For the latest package outline information go to 9LUCSP, 3x3.EPS PACKAGE OUTLINE, 3x3 UCSP 2-93 K 2

13 Package Information (continued) (The package drawing(s) in this data sheet may not reflect the most current specifications. For the latest package outline information go to PACKAGE OUTLINE, 6,, & 4L, TDFN, EXPOSED PAD, 3x3x. mm 2-37 H 2 6,, &L, DFN THIN.EPS MAX473// COMMON DIMENSIONS SYMBOL MIN. MAX. A.7. D E A.. L.2.4 k.2 MIN. A2.2 REF. PACKAGE VARIATIONS PKG. CODE N D2 E2 e JEDEC SPEC b [(N/2)-] x e T BSC MO229 / WEEA.4..9 REF T BSC MO229 / WEEA.4..9 REF T33- T33- T BSC.4 BSC MO229 / WEEC REF T BSC MO229 / WEEC.3..9 REF T BSC MO229 / WEEC.3..9 REF T BSC MO229 / WEED REF BSC MO229 / WEED REF T REF.4 BSC REF PACKAGE OUTLINE, 6,, & 4L, TDFN, EXPOSED PAD, 3x3x. mm -DRAWING NOT TO SCALE H 2 2 3

14 MAX473// Package Information (continued) (The package drawing(s) in this data sheet may not reflect the most current specifications. For the latest package outline information go to A2 e fl.. D TOP VIEW b E A H A c 4X S L BOTTOM VIEW α DIM A A INCHES MIN MAX BSC A2.3 b c D e E.6 H. L.6 α S.27 BSC MILLIMETERS MIN MAX BSC BSC LUMAXD.EPS FRONT VIEW SIDE VIEW PROPRIETARY INFORMATION TITLE: PACKAGE OUTLINE, L umax/usop APPROVAL DOCUMENT CONTROL NO. REV J Revision History Pages changed at Rev 2:, 2, 7,,, 4 Maxim cannot assume responsibility for use of any circuitry other than circuitry entirely embodied in a Maxim product. No circuit patent licenses are implied. Maxim reserves the right to change the circuitry and specifications without notice at any time. 4 Maxim Integrated Products, 2 San Gabriel Drive, Sunnyvale, CA Maxim Integrated Products is a registered trademark of Maxim Integrated Products, Inc.

LOW HIGH OFF ON. Maxim Integrated Products 1

LOW HIGH OFF ON. Maxim Integrated Products 1 9-79; Rev ; /07 Low-Voltage, Quad, SPST General Description The MAX0/MAX/MAX are quad, low-voltage, single-pole/single-throw (SPST) analog switches. On-resistance (00Ω, max) is matched between switches

More information

35Ω, Low-Voltage, SPST/SPDT Analog Switches in UCSP Package

35Ω, Low-Voltage, SPST/SPDT Analog Switches in UCSP Package 19-1994; Rev 3; 2/3 35, Low-Voltage, SPST/SPDT General Description The low on-resistance (R ON ), low-voltage analog switches operate from a single +2.V to +5.5V supply. The / are single-pole/single-throw

More information

MAX4636EUB -40 C to +85 C 10 µmax 1 NO1 IN1 GND. 3 x 3 THIN QFN OFF ON ON OFF SWITCHES SHOWN FOR "0" INPUT. Maxim Integrated Products 1

MAX4636EUB -40 C to +85 C 10 µmax 1 NO1 IN1 GND. 3 x 3 THIN QFN OFF ON ON OFF SWITCHES SHOWN FOR 0 INPUT. Maxim Integrated Products 1 9-79; Rev ; /3 Fast, Low-Voltage, Dual 4 SPDT General Description The are fast, dual 4 singlepole/double-throw (SPDT) analog switches that operate with supply voltages from +.8V to +.V. High switching

More information

2Ω, Quad, SPST, CMOS Analog Switches

2Ω, Quad, SPST, CMOS Analog Switches 9-73; Rev ; 4/ 2Ω, Quad, SPST, CMOS Analog Switches General Description The // quad analog switches feature.6ω max on-resistance (R ) when operating from a dual ±5V supply. R is matched between channels

More information

Pin Configurations/Functional Diagrams/Truth Tables IN V+ GND SOT23-6* MAX4544 ON OFF OFF ON SWITCHES SHOWN FOR "0" INPUT. Maxim Integrated Products 1

Pin Configurations/Functional Diagrams/Truth Tables IN V+ GND SOT23-6* MAX4544 ON OFF OFF ON SWITCHES SHOWN FOR 0 INPUT. Maxim Integrated Products 1 9-; Rev ; / Low-Voltage, Single-Supply General Description The MAX MAX are precision, dual analog switches designed to operate from a single +.V to +V supply. Low power consumption (µw) makes these parts

More information

Pin Configurations/Functional Diagrams/Truth Tables IN V+ GND SOT23-6* MAX4544 ON OFF OFF ON SWITCHES SHOWN FOR "0" INPUT. Maxim Integrated Products 1

Pin Configurations/Functional Diagrams/Truth Tables IN V+ GND SOT23-6* MAX4544 ON OFF OFF ON SWITCHES SHOWN FOR 0 INPUT. Maxim Integrated Products 1 9-; Rev ; / Low-Voltage, Single-Supply General Description The are precision, dual analog switches designed to operate from a single +.7V to +V supply. Low power consumption (µw) makes these parts ideal

More information

MAX14760/MAX14762/MAX14764 Above- and Below-the-Rails Low-Leakage Analog Switches

MAX14760/MAX14762/MAX14764 Above- and Below-the-Rails Low-Leakage Analog Switches 19-652; Rev ; 9/11 EVALUATION KIT AVAILABLE MAX1476// General Description The MAX1476// analog switches are capable of passing bipolar signals that are beyond their supply rails. These devices operate

More information

COM COM GND MAX4644 OFF OFF

COM COM GND MAX4644 OFF OFF 9-7; Rev ; / High-Speed, Low-Voltage, 4, General Description The is a single-pole/double-throw (SPDT) switch that operates from a single supply ranging from +.V to +.V. It provides low 4 on-resistance

More information

ON OFF PART. Pin Configurations/Functional Diagrams/Truth Tables 5 V+ LOGIC

ON OFF PART. Pin Configurations/Functional Diagrams/Truth Tables 5 V+ LOGIC 9-88; Rev ; /7 25Ω SPST Analog Switches in SOT23-6 General Description The are dual-supply single-pole/single-throw (SPST) switches. On-resistance is 25Ω max and flat (2Ω max) over the specified signal

More information

Precision, 8-Channel/Dual 4-Channel, High-Performance, CMOS Analog Multiplexers

Precision, 8-Channel/Dual 4-Channel, High-Performance, CMOS Analog Multiplexers 9-027; Rev 2; 8/02 Precision, 8-Channel/Dual 4-Channel, General Description The / precision, monolithic, CMOS analog multiplexers (muxes) offer low on-resistance (less than 0Ω), which is matched to within

More information

MAX4638/MAX Ω, Single 8:1 and Dual 4:1, Low-Voltage Analog Multiplexers

MAX4638/MAX Ω, Single 8:1 and Dual 4:1, Low-Voltage Analog Multiplexers General Description The / are single : and dual : CMOS analog multiplexers/demultiplexers (muxes/ demuxes). Each mux operates from a single +.V to +V supply or dual ±.V supplies. These devices feature.ω

More information

MAX14753 V DD INA0 INA1 INA2 INA3 OUT INB0 INB1 INB2 INB3

MAX14753 V DD INA0 INA1 INA2 INA3 OUT INB0 INB1 INB2 INB3 19-4255; Rev 3; 7/10 8-Channel/Dual 4-Channel General Description The are 8-to-1 and dual 4-to-1 high-voltage analog multiplexers. Both devices feature 60Ω (typ) on-resistance with 0.03Ω (typ) on-resistance

More information

PART TOP VIEW. Maxim Integrated Products 1

PART TOP VIEW. Maxim Integrated Products 1 9-96; Rev ; 2/ 45, SPDT Analog Switch in SOT23-8 General Description The is a dual-supply, single-pole/doublethrow (SPDT) analog switch. On-resistance is 45 max and flat (7 max) over the specified signal

More information

Low-Leakage, CMOS Analog Multiplexers

Low-Leakage, CMOS Analog Multiplexers / General Description The / are monolithic, CMOS analog multiplexers (muxes). The 8-channel is designed to connect one of eight inputs to a common output by control of a 3-bit binary address. The dual,

More information

Precision, 16-Channel/Dual 8-Channel, High-Performance, CMOS Analog Multiplexers

Precision, 16-Channel/Dual 8-Channel, High-Performance, CMOS Analog Multiplexers 9-27; Rev 3; 3/ Precision, 6-Channel/Dual 8-Channel, General Description The MA36/MA37 precision, monolithic, CMOS analog multiplexers (muxes) offer low on-resistance (less than Ω), which is matched to

More information

Precision, 16-Channel/Dual 8-Channel, Low-Voltage, CMOS Analog Multiplexers

Precision, 16-Channel/Dual 8-Channel, Low-Voltage, CMOS Analog Multiplexers / Precision, 6-Channel/Dual 8-Channel, General Description The / low-voltage, CMOS analog multiplexers (muxes) offer low on-resistance (Ω max), which is matched to within 6Ω between switches and remains

More information

Features. Functional Diagrams, Pin Configurations, and Truth Tables

Features. Functional Diagrams, Pin Configurations, and Truth Tables Features Low On-Resistance (Ω typ) Minimizes Distortion and Error Voltages Low Glitching Reduces Step Errors in Sample-and-Holds. Charge Injection, pc typ Single-Supply Operation (+.V to +1V) Improved

More information

Precision, Quad, SPST Analog Switches

Precision, Quad, SPST Analog Switches 9-8; Rev ; 9/ Precision, Quad, SPST Analog Switches General Description The are precision, quad, single-pole single-throw (SPST) analog switches. The MAX364 has four normally closed (N), and the MAX365

More information

Low-Voltage, 8-Channel/Dual 4-Channel Multiplexers with Latchable Inputs

Low-Voltage, 8-Channel/Dual 4-Channel Multiplexers with Latchable Inputs 9-396; Rev. ; 5/95 Low-Voltage, 8-Channel/Dual 4-Channel General Description The are low-voltage, CMOS, -of-8 and dual 4-channel muxes with latchable digital inputs. They feature low-voltage operation

More information

8-Channel/Dual 4-Channel, Low-Leakage, CMOS Analog Multiplexers

8-Channel/Dual 4-Channel, Low-Leakage, CMOS Analog Multiplexers 9-272; Rev 3; / 8-Channel/Dual -Channel, The / are monolithic, CMOS analog multiplexers (muxes). The 8-channel is designed to connect one of eight inputs to a common output by control of a 3-bit binary

More information

8-Channel/Dual 4-Channel, Low-Leakage, CMOS Analog Multiplexers

8-Channel/Dual 4-Channel, Low-Leakage, CMOS Analog Multiplexers 9-272; Rev 3; /4 8-Channel/Dual 4-Channel, The / are monolithic, CMOS analog multiplexers (muxes). The 8-channel is designed to connect one of eight inputs to a common output by control of a 3-bit binary

More information

Low-Voltage Single SPDT Analog Switch

Low-Voltage Single SPDT Analog Switch Low-Voltage Single SPDT Analog Switch DG22 DESCRIPTION The DG22 is a single-pole/double-throw monolithic CMOS analog switch designed for high performance switching of analog signals. Combining low power,

More information

Low-Voltage Single SPDT Analog Switch

Low-Voltage Single SPDT Analog Switch Low-Voltage Single SPDT Analog Switch DG22 DESCRIPTION The DG22 is a single-pole/double-throw monolithic CMOS analog switch designed for high performance switching of analog signals. Combining low power,

More information

Powered-off Protection, 1, 1.8 V to 5.5 V, SPDT Analog Switch (2:1 Multiplexer)

Powered-off Protection, 1, 1.8 V to 5.5 V, SPDT Analog Switch (2:1 Multiplexer) DGE Powered-off Protection,,.8 V to 5.5 V, SPDT Analog Switch (: Multiplexer) DESCRIPTION The DGE is a high performance single-pole, double-throw (SPDT) analog switch designed for.8 V to 5.5 V operation

More information

Monolithic CMOS Analog Multiplexers

Monolithic CMOS Analog Multiplexers 19-008; Rev 3; 9/01 Monolithic CMOS Analog Multiplexers General escription Maxim s and are monolithic CMOS analog multiplexers (muxes): the is a single 8-channel (1-of-8) mux, and the is a differential

More information

High-Supply-Voltage, Precision Voltage Reference in SOT23 MAX6035

High-Supply-Voltage, Precision Voltage Reference in SOT23 MAX6035 19-2606; Rev 3; 11/06 High-Supply-Voltage, Precision General Description The is a high-voltage, precision micropower voltage reference. This three-terminal device is available with output voltage options

More information

TOP VIEW. Maxim Integrated Products 1

TOP VIEW. Maxim Integrated Products 1 9-2266; Rev 2; 6/3 3ppm/ C, Low-Power, Low-Dropout General Description The high-precision, low-power, low-dropout voltage reference features a low 3ppm/ C (max) temperature coefficient and a low dropout

More information

SGM48753 CMOS Analog Switch

SGM48753 CMOS Analog Switch GENERAL DESCRIPTION The is a CMOS analog IC configured as three single-pole/double-throw (SPDT) switches. This CMOS device can operate from 2.5V to 5.5V single supplies. Each switch can handle rail-to-rail

More information

Powered-off Protection, 6, 1.8 V to 5.5 V, SPDT Analog Switch (2:1 Multiplexer)

Powered-off Protection, 6, 1.8 V to 5.5 V, SPDT Analog Switch (2:1 Multiplexer) Powered-off Protection,, 1. V to 5.5 V, SPDT Analog Switch (:1 Multiplexer) DESCRIPTION The is a high performance single-pole, double-throw (SPDT) analog switch designed for 1. V to 5.5 V operation with

More information

Precision, Quad, SPDT, CMOS Analog Switch

Precision, Quad, SPDT, CMOS Analog Switch 19-0189; Rev 1; 6/99 Precision, Quad, SPDT, MOS Analog Switch General Description The is a precision, quad, single-pole doublethrow (SPDT) analog switch. The four independent switches operate with bipolar

More information

Low-Voltage Analog Temperature Sensors in SC70 and SOT23 Packages

Low-Voltage Analog Temperature Sensors in SC70 and SOT23 Packages 19-2040; Rev 1; 6/01 Low-Voltage Analog Temperature Sensors General Description The precision, low-voltage, analog output temperature sensors are available in 5-pin SC70 and SOT23 packages. The devices

More information

PS381/PS383/PS385. Precision, 17V Analog Switches. Features. Applications. Functional Diagrams, Pin Configurations, and Truth Tables

PS381/PS383/PS385. Precision, 17V Analog Switches. Features. Applications. Functional Diagrams, Pin Configurations, and Truth Tables 79797979797979797979797979 Features Low On-Resistance (Ω typ) Minimizes Distortion and Error Voltages Low Glitching Reduces Step Errors in Sample-and-Holds. Charge Injection, pc typ Single Supply (+V to

More information

Description. For Fairchild s definition of Eco Status, please visit:

Description. For Fairchild s definition of Eco Status, please visit: FSA2357 Low R ON 3:1 Analog Switch Features 10µA Maximum I CCT Current Over an Expanded Control Voltage Range: V IN=2.6V, V CC=4.5V On Capacitance (C ON): 70pF Typical 0.55Ω Typical On Resistance (R ON)

More information

1 pc Charge Injection, 100 pa Leakage CMOS 5 V/5 V/3 V 4-Channel Multiplexer ADG604

1 pc Charge Injection, 100 pa Leakage CMOS 5 V/5 V/3 V 4-Channel Multiplexer ADG604 a FEATURES 1 pc Charge Injection (Over the Full Signal Range) 2.7 V to 5.5 V ual Supply 2.7 V to 5.5 ingle Supply Automotive Temperature Range: 4 C to +125 C 1 pa Max @ 25 C Leakage Currents 85 Typ On

More information

Low-Cost, Micropower, Low-Dropout, High-Output-Current, SOT23 Voltage References

Low-Cost, Micropower, Low-Dropout, High-Output-Current, SOT23 Voltage References 19-1613; Rev 3; 3/2 Low-Cost, Micropower, Low-Dropout, General Description The are low-cost, low-dropout (LDO), micropower voltage references. These three-terminal references are available with output

More information

N.C. OUT. Maxim Integrated Products 1

N.C. OUT. Maxim Integrated Products 1 19-2892; Rev 2; 11/6 Ultra-Low-Power Precision Series General Description The MAX629 micropower, low-dropout bandgap voltage reference combines ultra-low supply current and low drift in a miniature 5-pin

More information

CMOS ±5 V/+5 V/+3 V Triple SPDT Switch ADG633

CMOS ±5 V/+5 V/+3 V Triple SPDT Switch ADG633 CMOS ±5 V/+5 V/+3 V Triple SPT Switch AG633 FEATURES ±2 V to ±6 V ual Supply 2 V to 12 ingle Supply Automotive Temperature Range 4 o C to +125 o C

More information

SC70, 1.6V, Nanopower, Beyond-the-Rails Comparators With/Without Reference

SC70, 1.6V, Nanopower, Beyond-the-Rails Comparators With/Without Reference 19-1862; Rev 4; 1/7 SC7, 1.6V, Nanopower, Beyond-the-Rails General Description The nanopower comparators in space-saving SC7 packages feature Beyond-the- Rails inputs and are guaranteed to operate down

More information

Maxim Integrated Products 1

Maxim Integrated Products 1 19-4187; Rev 4; 7/1 μ μ PART AMPS PER PACKAGE PIN- PACKAGE + * TOP MARK MAX965AZK+ 1 5 SOT3 ADSI MAX965AZK/V+ 1 5 SOT3 ADSK MAX965AUA+ 1 8 μmax-ep* AABI MAX965ATA+ 1 8 TDFN-EP* BKX MAX9651AUA+ 8 μmax-ep*

More information

Four-Channel Thermistor Temperature-to-Pulse- Width Converter

Four-Channel Thermistor Temperature-to-Pulse- Width Converter 19-234; Rev ; 1/2 General Description The four-channel thermistor temperature-topulse-width converter measures the temperatures of up to four thermistors and converts them to a series of output pulses

More information

Switched-Capacitor Voltage Doublers

Switched-Capacitor Voltage Doublers 9-; Rev 3; / Switched-Capacitor Voltage Doublers General Description The ultra-small / monolithic, CMOS charge-pump voltage doublers accept input voltages ranging from +.V to +.V. Their high voltage-conversion

More information

1 pc Charge Injection, 100 pa Leakage, CMOS 5 V/+5 V/+3 V Quad SPST Switches ADG611/ADG612/ADG613

1 pc Charge Injection, 100 pa Leakage, CMOS 5 V/+5 V/+3 V Quad SPST Switches ADG611/ADG612/ADG613 a FEATURE 1 pc Charge Injection 2.7 V to 5.5 V ual upply +2.7 V to +5.5 V ingle upply Automotive Temperature Range 4 C to +125 C 1 pa Max @ 25 C Leakage Currents 85 On-Resistance Rail-to-Rail witching

More information

Improved Quad CMOS Analog Switches

Improved Quad CMOS Analog Switches Improved Quad CMOS Analog Switches DG211B, DG212B DESCRIPTION The DG211B, DG212B analog switches are highly improved versions of the industry-standard DG211, DG212. These devices are fabricated in proprietary

More information

LE Ω SECOND SOURCE BLEED RESISTORS PART. Maxim Integrated Products 1 MAX4800A MAX4802A. TQFP 7mm x 7mm ; Rev 0; 5/08 N.C. (RGND) TOP VIEW GND

LE Ω SECOND SOURCE BLEED RESISTORS PART. Maxim Integrated Products 1 MAX4800A MAX4802A. TQFP 7mm x 7mm ; Rev 0; 5/08 N.C. (RGND) TOP VIEW GND 19-4120; Rev 0; 5/08 Ω Ω μ TOP VIEW DIN VDD GND (RGND) VNN 36 35 34 33 32 31 30 29 28 27 26 25 PART BED RESISTORS SECOND SOURCE PIN- PACKAGE CXZ+* No 26 CSBGA CQI+ No HV2203PJ-G 28 PLCC CCM+* No HV2203FG-G

More information

onlinecomponents.com

onlinecomponents.com a FEATURES +.8 V to +. ingle Supply 2. V ual Supply 2. ON Resistance. ON Resistance Flatness pa Leakage Currents 4 ns Switching Times Single 6-to- Multiplexer AG76 ifferential 8-to- Multiplexer AG77 28-Lead

More information

Low Voltage 2-1 Mux, Level Translator ADG3232

Low Voltage 2-1 Mux, Level Translator ADG3232 Low Voltage 2-1 Mux, Level Translator ADG3232 FEATURES Operates from 1.65 V to 3.6 V Supply Rails Unidirectional Signal Path, Bidirectional Level Translation Tiny 8-Lead SOT-23 Package Short Circuit Protection

More information

Miniature Electronically Trimmable Capacitor V DD. Maxim Integrated Products 1

Miniature Electronically Trimmable Capacitor V DD. Maxim Integrated Products 1 19-1948; Rev 1; 3/01 Miniature Electronically Trimmable Capacitor General Description The is a fine-line (geometry) electronically trimmable capacitor (FLECAP) programmable through a simple digital interface.

More information

CMOS, +1.8 V to +5.5 V/ 2.5 V, 2.5 Low-Voltage, 8-/16-Channel Multiplexers ADG706/ADG707 REV. A

CMOS, +1.8 V to +5.5 V/ 2.5 V, 2.5 Low-Voltage, 8-/16-Channel Multiplexers ADG706/ADG707 REV. A a FEATURES +.8 V to +. ingle Supply. V ual Supply. ON Resistance. ON Resistance Flatness pa Leakage Currents ns Switching Times Single -to- Multiplexer AG ifferential 8-to- Multiplexer AG 8-Lead TSSOP

More information

FEATURES BENEFITS APPLICATIONS

FEATURES BENEFITS APPLICATIONS 0.37, Low Capacitance, Dual DPDT / Quad SPDT Analog Switch DESCRIPTION The, is a four-channel single-pole double-throw (SPDT) analog switch with two control inputs. It is also known as a two-channel double-pole

More information

Dual High-Speed 1.5A MOSFET Drivers

Dual High-Speed 1.5A MOSFET Drivers 19-132; Rev 2; 6/6 Dual High-Speed 1.A MOSFET Drivers General Description The are dual monolithic MOSFET drivers designed to tralate TTL/CMOS inputs to high voltage/current outputs. The MAX4426 is a dual

More information

Compact, Dual-Output Charge Pump

Compact, Dual-Output Charge Pump 9-7; Rev ; 7/97 Compact, Dual-Output Charge Pump General Description The is a CMOS charge-pump DC-DC converter in an ultra-small µmax package. It produces positive and negative outputs from a single positive

More information

FSUSB31 Low-Power 1-Port Hi-Speed USB 2.0 (480Mbps) Switch

FSUSB31 Low-Power 1-Port Hi-Speed USB 2.0 (480Mbps) Switch Low-Power 1-Port Hi-Speed USB 2.0 (480Mbps) Switch Features Low On capacitance, 3.7pF (typical) Low On resistance, 6.5Ω (typical) Low power consumption (1µA maximum) 10µA maximum I CCT over and expanded

More information

AOZ Ω Low-Voltage Dual-DPDT Analog Switch

AOZ Ω Low-Voltage Dual-DPDT Analog Switch 0.3Ω Low-Voltage Dual-DPDT nalog witch General Description The OZ6274 is a dual Double-Pole, Double-Throw (DPDT) analog switch that is designed to operate from a single 1.65V to 4.3V supply. The OZ6274

More information

MAX TEMPCO (ppm/ C) INITIAL ERROR (mv)

MAX TEMPCO (ppm/ C) INITIAL ERROR (mv) 19-0887; Rev 7; /07 General Description The are industry-standard precision voltage references. The stable 10V output of the REF01 can be adjusted over a ±% range with minimal effect on temperature stability.

More information

DG211. Features. SPST 4-Channel Analog Switch. Part Number Information. Functional Block Diagrams. Pinout. Data Sheet December 21, 2005 FN3118.

DG211. Features. SPST 4-Channel Analog Switch. Part Number Information. Functional Block Diagrams. Pinout. Data Sheet December 21, 2005 FN3118. Data Sheet FN3118.4 SPST 4-Channel Analog Switch The is a low cost, CMOS monolithic, Quad SPST analog switch. It can be used in general purpose switching applications for communications, instrumentation,

More information

NC7SB3157 TinyLogic Low Voltage UHS Analog Switch 2-Channel Multiplexer/Demultiplexer (Preliminary)

NC7SB3157 TinyLogic Low Voltage UHS Analog Switch 2-Channel Multiplexer/Demultiplexer (Preliminary) September 1999 Revised November 1999 TinyLogic Low Voltage UHS Analog Switch 2-Channel Multiplexer/Demultiplexer (Preliminary) General Description The is a high performance, Analog Switch 2- channel CMOS

More information

LC2 MOS 4-/8-Channel High Performance Analog Multiplexers ADG408/ADG409

LC2 MOS 4-/8-Channel High Performance Analog Multiplexers ADG408/ADG409 a FEATURES 44 upply Maximum Ratings to Analog Signal Range Low On Resistance ( max) Low Power (I SUPPLY < 75 A) Fast Switching Break-Before-Make Switching Action Plug-in Replacement for G408/G409 APPLICATIONS

More information

PART. Maxim Integrated Products 1

PART. Maxim Integrated Products 1 9-79; Rev ; 9/ SC7 Inverting Charge Pumps General Description The / monolithic, CMOS chargepump voltage inverters in the ultra-small SC7 package feature a low Ω output resistance, permitting loads up to

More information

PART. Maxim Integrated Products 1

PART. Maxim Integrated Products 1 9-704; Rev 5; /09 Improved Precision Micropower General Description The is a precision two-terminal shunt mode, bandgap voltage reference with a fixed reverse breakdown voltage of.225v. Ideal for space-critical

More information

4-Pin µp Voltage Monitors with Pin-Selectable Power-On Reset Timeout Delay

4-Pin µp Voltage Monitors with Pin-Selectable Power-On Reset Timeout Delay 19-1122; Rev 3; 12/05 4-Pin µp oltage Monitors with Pin-Selectable General Description The microprocessor (µp) supervisory circuits monitor power supplies in µp and digital systems. They provide excellent

More information

8-CHANNEL MULTIPLEXER DESCRIPTION: FEATURES: SEi 338RP

8-CHANNEL MULTIPLEXER DESCRIPTION: FEATURES: SEi 338RP A0 1 16 A1 V+ V- GND EN V- NO1 NO2 NO3 SEi 338RP A2 GND V+ NO5 NO6 NO1 NO2 NO3 NO4 NO5 NO6 NO7 NO8 COM NO4 NO7 CMOS DECODE LOGIC COM 8 9 NO8 A2 A1A0 EN FEATURES: DESCRIPTION: RAD-PAK Technology hardened

More information

AOZ Ω Low-Voltage Dual SPDT Analog Switch. General Description. Features. Applications AOZ6236

AOZ Ω Low-Voltage Dual SPDT Analog Switch. General Description. Features. Applications AOZ6236 0.35 Ω Low-Voltage Dual PDT nalog witch General Description The OZ6236 is a 0.35 Ω low-voltage Dual ingle Pole Double Throw (PDT) analog switch. The OZ6236 operates from a single 1.65 V to 4.3 V supply.

More information

Improved, Dual, High-Speed Analog Switches

Improved, Dual, High-Speed Analog Switches -477; Rev ; 6/ Improved, ual, High-peed Analog witches General escription Maxim's redesigned G4// analog switches now feature guaranteed low on-resistance matching between switches (Ω max) and guaranteed

More information

Regulated 3.3V Charge Pump MAX679

Regulated 3.3V Charge Pump MAX679 19-1217; Rev ; 4/97 Regulated 3.3 Charge Pump General Description The step-up, regulated charge pump generates a 3.3 ±4% output voltage from a 1.8 to 3.6 input voltage (two alkaline, NiCd, or NiMH; or

More information

Precision, Micropower, Low-Dropout, High- Output-Current, SO-8 Voltage References

Precision, Micropower, Low-Dropout, High- Output-Current, SO-8 Voltage References 19-165; Rev ; 7/ Precision, Micropower, Low-Dropout, High- General Description The MAX6167 are precision, low-dropout, micropower voltage references. These three-terminal devices operate with an input

More information

Ultra-Low-Power Series Voltage Reference

Ultra-Low-Power Series Voltage Reference 19-257; Rev 2; 3/5 Ultra-Low-Power Series Voltage Reference General Description The micropower, low-dropout bandgap voltage reference combines ultra-low supply current and low drift in a miniature 5-pin

More information

Low Voltage 400 MHz Quad 2:1 Mux with 3 ns Switching Time ADG774A

Low Voltage 400 MHz Quad 2:1 Mux with 3 ns Switching Time ADG774A a FEATURE Bandwidth >4 MHz Low Insertion Loss and On Resistance: 2.2 Typical On-Resistance Flatness.3 Typical ingle 3 V/5 upply Operation Very Low istortion:

More information

AOZ6135 High Performance, Low R ON, 1Ω SPDT Analog Switch

AOZ6135 High Performance, Low R ON, 1Ω SPDT Analog Switch OZ6135 High Performance, Low R ON, 1Ω PDT nalog witch General Description The OZ6135 is a high performance single-pole double-throw (PDT), low power, TTL-compatible bus switch. The OZ6135 can handle analog

More information

SGM7227 High Speed USB 2.0 (480Mbps) DPDT Analog Switch

SGM7227 High Speed USB 2.0 (480Mbps) DPDT Analog Switch GENERAL DECRIPTION The GM7227 is a high-speed, low-power double-pole/ double-throw (DPDT) analog switch that operates from a single 1.8V to 4.3V power supply. GM7227 is designed for the switching of high-speed

More information

DG411CY. Pin Configurations/Functional Diagrams/Truth Tables IN2 DG412 IN3 DIP/SO/TSSOP DG412 LOGIC SWITCH OFF SWITCHES SHOWN FOR LOGIC 0 INPUT

DG411CY. Pin Configurations/Functional Diagrams/Truth Tables IN2 DG412 IN3 DIP/SO/TSSOP DG412 LOGIC SWITCH OFF SWITCHES SHOWN FOR LOGIC 0 INPUT 9-728; Rev ; 9/0 Improved, Quad, General escription Maxim s redesigned analog switches now feature low on-resistance matching between switches (Ω max) and guaranteed on-resistance flatness over the signal

More information

SGM :1 CMOS Analog Signal Multiplexer

SGM :1 CMOS Analog Signal Multiplexer 8:1 CMOS nalog Signal Multiplexer GENERL DESCRIPTION The is a CMOS analog IC configured as an 8-channel multiplexer. This CMOS device can operate from 2.5V to 5.5V single supplies. Each switch can handle

More information

Case Outline(s). The case outlines shall be designated in Mil-Std-1835 and as follows:

Case Outline(s). The case outlines shall be designated in Mil-Std-1835 and as follows: +SCOPE: TTL COMPATIBLE CMOS ANALOG SWITCHES Device Type Generic Number 0 DG300A(x)/883B 02 DG30A(x)/883B 03 DG302A(x)/883B 04 DG303A(x)/883B Case Outline(s). The case outlines shall be designated in Mil-Std-835

More information

PS391/PS392/PS393. Precision, Quad, SPST, Analog Switches. Description

PS391/PS392/PS393. Precision, Quad, SPST, Analog Switches. Description PS39/PS39/PS393 379379379379379379379379379379379379379 Precision, Quad, SPST, Analog Switches Features Low On-Resistance, ohms typ) Minimizes Disttion and Err oltages On-Resistance Match Between hannels,

More information

Period/Frequency Output

Period/Frequency Output / General Description The / are low-cost, low-current temperature sensors with a single-wire output. The converts the ambient temperature into a square wave with a period proportional to absolute temperature

More information

PART MAX1666SEEE MAX1666XEEP UVO V CC REF MAX1666A/V UVA MMA WRN CGI. Maxim Integrated Products 1

PART MAX1666SEEE MAX1666XEEP UVO V CC REF MAX1666A/V UVA MMA WRN CGI. Maxim Integrated Products 1 19-1465; Rev 3; 11/04 General Description The MAX1666 provides complete protection against overvoltage, undervoltage, overcharge current, overdischarge current, and cell mismatch for 2-cell to 4-cell lithium-ion

More information

3-Pin Microprocessor Reset Circuits

3-Pin Microprocessor Reset Circuits 19-0344; Rev 6; 12/05 3-Pin Microprocessor Reset Circuits General Description The MAX803/MAX809/MAX810 are microprocessor (µp) supervisory circuits used to monitor the power supplies in µp and digital

More information

TOP VIEW V L GND I/O V L GND

TOP VIEW V L GND I/O V L GND 19-1847; Rev 3; 5/9 1µA, 2Mbps, Low-Voltage Level Tralators in SC7 and µdfn General Description The MAX337/ logic-level tralators are ideal for applicatio interfacing low-voltage devices to other logic

More information

Precision 8-Ch/Dual 4-Ch Low Voltage Analog Multiplexers

Precision 8-Ch/Dual 4-Ch Low Voltage Analog Multiplexers Precision 8-Ch/ual 4-Ch Low Voltage Analog Multiplexers ESCRIPTION The G948, G949 uses BiCMOS wafer fabrication technology that allows the G948, G949 to operate on single and dual supplies. Single supply

More information

LC 2 MOS Precision Analog Switch in MSOP ADG419-EP

LC 2 MOS Precision Analog Switch in MSOP ADG419-EP LC 2 MOS Precision Analog Switch in MSOP AG49-EP FEATURES 44 V supply maximum ratings VSS to V analog signal range Low on resistance:

More information

8-Ch/Dual 4-Ch High-Performance CMOS Analog Multiplexers

8-Ch/Dual 4-Ch High-Performance CMOS Analog Multiplexers 8-Ch/ual 4-Ch High-Performance CMOS Analog Multiplexers Low On-Resistance r S(on) : Low Charge Injection Q: pc Fast Transition Time t TRANS : 6 ns Low Power I SUPPLY : A Single Supply Capability 44-V Supply

More information

Improved, SPST/SPDT Analog Switches

Improved, SPST/SPDT Analog Switches 9-0; Rev 2; 2/96 Improved, PT/PT nalog witches General escription Maxim s redesigned G7/G/G9 precision, CMO, monolithic analog switches now feature guaranteed on-resistance matching (3Ω max) between switches

More information

1μA Ultra-Tiny Shunt Voltage Reference

1μA Ultra-Tiny Shunt Voltage Reference EVALUATION KIT AVAILABLE MAX6069 General Description The MAX6069 ultra-low-power shunt references are ideal for space-critical and low-power applications. They are offered in a 4-bump wafer-level package

More information

IN1 IN2 DG412 GND IN3 IN4 DIP/SO/TSSOP DG412 LOGIC SWITCH OFF SWITCHES SHOWN FOR LOGIC 0 INPUT

IN1 IN2 DG412 GND IN3 IN4 DIP/SO/TSSOP DG412 LOGIC SWITCH OFF SWITCHES SHOWN FOR LOGIC 0 INPUT 9-4728; Rev 7; 9/08 Improved, Quad, General escription Maxim s redesigned analog switches now feature low on-resistance matching between switches (3Ω max) and guaranteed on-resistance flatness over the

More information

SGM Ω, High Speed, Low Voltage Analog Switch/Multiplexer

SGM Ω, High Speed, Low Voltage Analog Switch/Multiplexer .5Ω, High Speed, Low Voltage nalog Switch/Multiplexer GENERL DESCRIPTION The SGM4782 is high-speed, low-voltage, low on-resistance, CMOS analog multiplexer/switch that configured as two 4-channel multiplexers.

More information

10Ω, Quad, SPST, CMOS Analog Switches

10Ω, Quad, SPST, CMOS Analog Switches -; Rev ; / Ω, Quad, SPST, MOS nalog Switches General Description Maxim s MX/MX/MX analog switches feature low on-resistance (Ω max) and.ω on-resistance matching between channels. These switches conduct

More information

MAX701 N.C. GND DIP/SO

MAX701 N.C. GND DIP/SO 9-90; Rev ; /0 Power-Supply Monitor with Reset General Description The MAX00/MAX0/MAX0 are supervisory circuits used to monitor the power supplies in microprocessor (µp) and digital systems. The / outputs

More information

FEATURES APPLICATIONS

FEATURES APPLICATIONS 6 On-Resistance, +12 V, ± V, + V, +3 V, SPST and SPDT Switches DESRIPTION analog switches are designed to operate from +3 V to +16 V single supply or ± 3 V to ± 8 V dual supply and are fully specified

More information

FSUSB30 Low-Power, Two-Port, High-Speed USB 2.0 (480Mbps) Switch

FSUSB30 Low-Power, Two-Port, High-Speed USB 2.0 (480Mbps) Switch FSUSB30 Low-Power, Two-Port, High-Speed USB 2.0 (480Mbps) Switch Features? Low On Capacitance: 3.7pF (Typical)? Low On Resistance: 6.5 (Typical)? Low Power Consumption: 1µA (Maximum) 10µA Maximum I CCT

More information

MM74C150 MM82C19 16-Line to 1-Line Multiplexer 3-STATE 16-Line to 1-Line Multiplexer

MM74C150 MM82C19 16-Line to 1-Line Multiplexer 3-STATE 16-Line to 1-Line Multiplexer MM74C150 MM82C19 16-Line to 1-Line Multiplexer 3-STATE 16-Line to 1-Line Multiplexer General Description The MM74C150 and MM82C19 multiplex 16 digital lines to 1 output. A 4-bit address code determines

More information

INT RST TEMP RANGE PIN- PACKAGE TOP MARK PKG CODE PART. -40 C to +125 C -40 C to +125 C 16 QSOP E16-4 MAX7323AEE+ 16 TQFN-EP* 3mm x 3mm MAX7323ATE+

INT RST TEMP RANGE PIN- PACKAGE TOP MARK PKG CODE PART. -40 C to +125 C -40 C to +125 C 16 QSOP E16-4 MAX7323AEE+ 16 TQFN-EP* 3mm x 3mm MAX7323ATE+ 19-3806; Rev 1; 7/07 INT RST Ω μ PART MAX7323AEE+ MAX7323ATE+ * TEMP RANGE -40 C to +125 C -40 C to +125 C PIN- PACKAGE TOP MARK PKG CODE 16 QSOP E16-4 16 TQFN-EP* 3mm x 3mm ADE T1633-4 PART INPUTS INTERRUPT

More information

AG726/AG732 SPECIFICATIONS ( = V %, = V, GN = V, unless otherwise noted.) B Version 4 C Parameter +2 C to +8 C Unit Test Conditions/Comments ANALOG SW

AG726/AG732 SPECIFICATIONS ( = V %, = V, GN = V, unless otherwise noted.) B Version 4 C Parameter +2 C to +8 C Unit Test Conditions/Comments ANALOG SW a FEATURES.8 V to. ingle Supply 2. V ual-supply Operation 4 On Resistance. On Resistance Flatness 48-Lead TQFP or 48-Lead 7 mm 7 mm CSP Packages Rail-to-Rail Operation 3 ns Switching Times Single 32-to-

More information

MM74C00 MM74C02 MM74C04 Quad 2-Input NAND Gate Quad 2-Input NOR Gate Hex Inverter

MM74C00 MM74C02 MM74C04 Quad 2-Input NAND Gate Quad 2-Input NOR Gate Hex Inverter MM74C00 MM74C02 MM74C04 Quad 2-Input NAND Gate Quad 2-Input NOR Gate Hex Inverter General Description The MM74C00, MM74C02, and MM74C04 logic gates employ complementary MOS (CMOS) to achieve wide power

More information

74HC4051; 74HCT channel analog multiplexer/demultiplexer

74HC4051; 74HCT channel analog multiplexer/demultiplexer Product data sheet 1. General description 2. Features 3. Applications The is a high-speed Si-gate CMOS device and is pin compatible with Low-power Schottky TTL (LSTTL). The device is specified in compliance

More information

Precision, Low-Power, Low-Dropout, SOT23-3 Voltage References

Precision, Low-Power, Low-Dropout, SOT23-3 Voltage References 19-777; Rev 3; /01 General Description The /MAX6021/MAX6025/MAX6030/MAX601/ MAX605/ precision, low-dropout, micropower voltage references are available in miniature SOT23-3 surface-mount packages. They

More information

AOZ6115 High Performance, Low R ON, SPST Analog Switch

AOZ6115 High Performance, Low R ON, SPST Analog Switch OZ6115 High Performance, Low R ON, PT nalog witch General Description The OZ6115 is a high performance single-pole single-throw (PT), low power, TTL-compatible bus switch. The OZ6115 can handle analog

More information

INTEGRATED CIRCUITS. 74LV688 8-bit magnitude comparator. Product specification Supersedes data of 1997 May 15 IC24 Data Handbook.

INTEGRATED CIRCUITS. 74LV688 8-bit magnitude comparator. Product specification Supersedes data of 1997 May 15 IC24 Data Handbook. INTEGRATED CIRCUITS Supersedes data of 1997 May 15 IC24 Data Handbook 1998 Jun 23 FEATURES Wide operating voltage: 1.0 to 5.5V Optimized for low voltage applications: 1.0V to 3.6V Accepts TTL input levels

More information

Features Y Wide analog input voltage range g6v. Y Low on resistance 50 typ (VCC V EE e4 5V) Y Logic level translation to enable 5V logic with g5v

Features Y Wide analog input voltage range g6v. Y Low on resistance 50 typ (VCC V EE e4 5V) Y Logic level translation to enable 5V logic with g5v 74VHC4051 8-Channel Analog Multiplexer 74VHC4052 Dual 4-Channel Analog Multiplexer 74VHC4053 Triple 2-Channel Analog Multiplexer General Description These multiplexers are digitally controlled analog switches

More information

INTEGRATED CIRCUITS. 74LV00 Quad 2-input NAND gate. Product specification Supersedes data of 1998 Apr 13 IC24 Data Handbook.

INTEGRATED CIRCUITS. 74LV00 Quad 2-input NAND gate. Product specification Supersedes data of 1998 Apr 13 IC24 Data Handbook. INTEGRATED CIRCUITS Supersedes data of 1998 Apr 13 IC24 Data Handbook 1998 Apr 20 FEATURES Wide operating voltage: 1.0 to 5.5 V Optimized for low voltage applications: 1.0 to 3.6 V Accepts TTL input levels

More information

INTEGRATED CIRCUITS. 74LVC138A 3-to-8 line decoder/demultiplexer; inverting. Product specification 1998 Apr 28

INTEGRATED CIRCUITS. 74LVC138A 3-to-8 line decoder/demultiplexer; inverting. Product specification 1998 Apr 28 INTEGRATED CIRCUITS -to-8 line decoder/demultiplexer; inverting 998 Apr 8 FEATURES Wide supply voltage range of. to. V In accordance with JEDEC standard no. 8-A Inputs accept voltages up to. V CMOS lower

More information

28V, 100mA, Low-Quiescent-Current LDO with Reset and Power-Fail Input/Output

28V, 100mA, Low-Quiescent-Current LDO with Reset and Power-Fail Input/Output 19-654; Rev ; 11/6 General Description The high-voltage linear regulator is designed to operate from a +5V to +28V input voltage, and withstands up to 4V transients. The device consumes only 45µA of quiescent

More information