Hallogic Hall-effect Sensors OH090U, OH180U, OH360U OHN3000 Series, OHS3000 Series OHN3100 Series, OHS3100 Series
|
|
|
- Douglas Thompson
- 6 years ago
- Views:
Transcription
1 Hallogic Halleffect Sensors Features: Designed for noncontact switching operations Operates over broad range of supply voltages (4.5 V to 24 V) Operates with excellent temperature stability in harsh environments Drive capability up to 7 TTL loads Description: These Halleffect devices contain a monolithic integrated circuit which incorporates a Hall element, a linear amplifier, a threshold amplifier, and Schmitt trigger on a single Hallogic silicon chip. Included onchip is a band gap voltage regulator to allow operation with a wide range of supply voltages. These devices feature logic level output and provide up to 21 ma of sink current. This allows direct driving of more than 7 TTL loads or any standard logic family using power supplies ranging from 4.5 to 24 volts. Output amplitude is constant at switching frequencies from DC to over khz. The UniPolar turns on with a (logic level ) after a sufficient magnetic field from the south pole of a magnet approached the symbolized face of the device (Operating ) and turns off (logic level 1 ) after the magnetic field reached a minimum value. The BiPolar latch device turns on (logic level ) in the presence of a magnetic south pole and turn off (logic level 1 ) when subjected to a magnetic north pole. Both magnetic poles are necessary for operation for BiPolar devices. This feature makes these sensors ideal for applications in noncontact switching operations, brushless DC motors and for use with multiple pole magnets. Applications: Noncontact reflective object sensor Assembly line automation Machine automation Machine safety End of travel sensor Door sensor Ordering Information OH313U, OH3113U OHN319U, OHS319U, OHN3119U, OHS3119U OHN3U, OHS3U, OHN31U, OHS31U OHN33U, HS33U, OHN313U, OHS313U OHN3131U, OHS3131U OHN34U, OHS34U, OHN314U, OHS314U OH375U, OHS375U, OHN3175U, OHS3175U OHN3177U, OHS3177U Unipolar nonlatching BiPolar latching Pin # Transistor 1 V CC 2 Ground 3 Output 1 Vcc Voltage Regulator Hall Element Output 3 2 Ground [MILLIMETERS] DIMENSIONS ARE IN: INCHES RoHS OPTEK Technology Inc Wallace Drive, Carrollton, Texas 76 Phone: (972) 3232 or (8) FAX: (972) sensors@optekinc.com Page 1 of 9
2 Hallogic Halleffect Sensors Absolute Maximum Ratings (T A = C unless otherwise noted) Supply Voltage, Vcc Storage Temperature Range, T S Operating Temperature Range, T A Electrical Characteristics (Vcc = 4.5 V to 24 V, T A = C unless otherwise noted) OH9U UniPolar OHN3 U OHS3 U OH9/18/36U V 65 C to +16 C C to +85 C 4 C to +1 C 4 C to +1 C Lead Soldering Temperature (1/8 in. (3.2 mm) from case for 5 sec. with soldering iron) 26 C (1) Output ON Current, I SINK ma Output OFF Voltage, V OUT V Magnetic Flux Density, B Unlimited Icc Supply Current 6 9 ma Vcc = 24 V, Output Off V OL Output Saturation Voltage 3 mv Vcc = 4.5 V, I OL = ma, B 18 I OH Output Leakage Current.5 1. µa Vcc = 24 V, V OUT = 24 V, B t r Output Rise Time µs R L = 8 Ω, C L = pf, Vcc = 14 V t f Output Fall Time.1 1. µs OH18U UniPolar Icc Supply Current 6 9 ma Vcc = 24 V, Output Off V OL Output Saturation Voltage 3 mv Vcc = 4.5 V, I OL = ma, B 29 I OH Output Leakage Current.5 1. µa Vcc = 24 V, V OUT = 24 V, B t r Output Rise Time µs R L = 8 Ω, C L = pf, Vcc = 14 V t f Output Fall Time.1 1. µs Page 2 of 9 OPTEK Technology Inc Wallace Drive, Carrollton, Texas 76 Phone: (972) 3232 or (8) FAX: (972) sensors@optekinc.com
3 Hallogic Halleffect Sensors Electrical Characteristics (Vcc = 4.5 V to 24 V, T A = C unless otherwise noted) OH36U UniPolar Icc Supply Current 6 9 ma Vcc = 24 V, Output Off V OL Output Saturation Voltage 3 mv Vcc = 4.5 V, I OL = ma, B 465 I OH Output Leakage Current.1 1. µa Vcc = 24 V, V OUT = 24 V, B 1 t r Output Rise Time µs t f Output Fall Time.1 1. µs R L = 8 Ω, C L = pf, Vcc = 14 V OHN313U, OHN3113U UniPolar OHN313 OHN3113 OHN313 OHN3113 OHN313 OHN C TO 85 C C TO 85 C C TO 85 C Icc Supply Current 4 7 ma Vcc = 24 V, Output Off, B V OL Output Saturation Voltage 4 mv Vcc = 4.5 V, I OL = ma, B 4 I OH Output Leakage Current.1 1. µa Vcc = 24 V, V OUT = 24 V, B t r Output Rise Time µs R L = 8 Ω, C L = pf, Vcc = 12 V t f Output Fall Time.1 1. µs OPTEK Technology Inc Wallace Drive, Carrollton, Texas 76 Phone: (972) 3232 or (8) FAX: (972) sensors@optekinc.com Page 3 of 9
4 Hallogic Halleffect Sensors Electrical Characteristics (Vcc = 4.5 V to 24 V, T A = C unless otherwise noted) OHN319U, OHS319U, OHN3119U, OHS3119U OH_319 OHN3119 OHS3119 OH_319 OHN3119 OHS3119 OH_319 OHN3119 OHS UniPolar C to +85 C 4 C to +1 C C to +85 C 4 C to +1 C C to +85 C 4 C to +1 C Icc Supply Current 4 7 ma Vcc = 24 V, Output Off, B 1 V OL Output Saturation Voltage 4 mv Vcc = 4.5 V, I OL = ma, B I OH Output Leakage Current.1 1. µa Vcc = 24 V, V OUT = 24 V, B t r Output Rise Time µs t f Output Fall Time.1 1. µs R L = 8 Ω, C L = pf, Vcc = 12 V OHN3U, OHS3U, OHN31U, OHS31U UniPolar OH_3 OHN31 OHS31 OH_3 OHN31 OHS31 OH_3 OHN31 OHS C to +85 C 4 C to +1 C C to +85 C 4 C to +1 C C to +85 C 4 C to +1 C Icc Supply Current 4 7 ma Vcc = 24 V, Output Off, B V OL Output Saturation Voltage 4 mv Vcc = 4.5 V, I OL = ma, B 3 I OH Output Leakage Current.1 1. µa Vcc = 24 V, V OUT = 24 V, B t r Output Rise Time µs t f Output Fall Time.1 1. µs R L = 8 Ω, C L = pf, Vcc = 12 V Page 4 of 9 OPTEK Technology Inc Wallace Drive, Carrollton, Texas 76 Phone: (972) 3232 or (8) FAX: (972) sensors@optekinc.com
5 Hallogic Halleffect Sensors Electrical Characteristics (Vcc = 4.5 V to 24 V, T A = C unless otherwise noted) OHN33U, OHS33U, OHN313U & OHS313U OH_33 OH_313 OHN313 OHS313 OH_33 OH_313 OHN313 OHS UniPolar C to +85 C 4 C to +1 C C to +85 C 4 C to +1 C OH_33 45 Magnetic OH_313 Hysteresis OHN313 C to +85 C OHS313 4 C to +1 C Icc Supply Current 4 7 ma Vcc = 24 V, Output Off, B V OL Output Saturation Voltage 4 mv Vcc = 4.5 V, I OL = ma, B I OH Output Leakage Current.1 1. µa Vcc = 24 V, V OUT = 24 V, B t r Output Rise Time µs R L = 8 Ω, C L = pf, Vcc = 12 V t f Output Fall Time.1 1. µs OHN3131U & OHS3131U UniPolar OH_3131 OHN3131 OHS3131 OH_331 OHN3131 OHS3131 OH_331 OHN3131 OHS C to +85 C 4 C to +1 C C to +85 C 4 C to +1 C C to +85 C 4 C to +1 C Icc Supply Current 4 7 ma Vcc = 24 V, Output Off, B V OL Output Saturation Voltage 4 mv Vcc = 4.5 V, I OL = ma, B I OH Output Leakage Current.1 1. µa Vcc = 24 V, V OUT = 24 V, B t r Output Rise Time µs R L = 8 Ω, C L = pf, Vcc = 12 V t f Output Fall Time.1 1. µs OPTEK Technology Inc Wallace Drive, Carrollton, Texas 76 Phone: (972) 3232 or (8) FAX: (972) sensors@optekinc.com Page 5 of 9
6 Hallogic Halleffect Sensors Electrical Characteristics (Vcc = 4.5 V to 24 V, T A = C unless otherwise noted) OHN34U, OHS34U, OHN314U, OHS314U OH_34 OHN314 OHS314 OH_34 OHN314 OHS314 OH_34 OHN314 OHS UniPolar C to +85 C 4 C to +1 C C to +85 C 4 C to +1 C C to +85 C 4 C to +1 C Icc Supply Current 4 7 ma Vcc = 24 V, Output Off, B V OL Output Saturation Voltage 4 mv Vcc = 4.5 V, I OL = ma, B I OH Output Leakage Current.1 1. µa Vcc = 24 V, V OUT = 24 V, B t r Output Rise Time µs R L = 8 Ω, C L = pf, Vcc = 12 V t f Output Fall Time.1 1. µs OHN375U, OHS375U, OHN3175U, OHS3175U BiPolar Latch OH_375 OH_3175 OHN3175 OHS3175 OH_375 OH_3175 OHN3175 OHS C to +85 C 4 C to +1 C C to +85 C 4 C to +1 C OH_375 Magnetic OH_3175 Hysteresis OHN C to +85 C OHS C to +1 C Icc Supply Current 4 7 ma Vcc = 24 V, Output Off, B 2 V OL Output Saturation Voltage 4 mv Vcc = 4.5 V, I OL = ma, B 2 I OH Output Leakage Current.1 1. µa Vcc = 24 V, V OUT = 24 V, B 2 t r Output Rise Time µs R L = 8 Ω, C L = pf, Vcc = 12 V t f Output Fall Time.1 1. µs Page 6 of 9 OPTEK Technology Inc Wallace Drive, Carrollton, Texas 76 Phone: (972) 3232 or (8) FAX: (972) sensors@optekinc.com
7 Hallogic Halleffect Sensors Electrical Characteristics (Vcc = 4.5 V to 24 V, T A = C unless otherwise noted) OHN3177U, OHS3177U BiPolar Latch OHN3177 OHS3177 OHN3177 OHS3177 OHN3177 OHS C to +85 C 4 C to +1 C C to +85 C 4 C to +1 C C to +85 C 4 C to +1 C Icc Supply Current 4 7 ma Vcc = 24 V, Output Off, B 2 V OL Output Saturation Voltage 4 mv Vcc = 4.5 V, I OL = ma, B 2 I OH Output Leakage Current.1 1. µa Vcc = 24 V, V OUT = 24 V, B 2 t r Output Rise Time µs t f Output Fall Time.1 1. µs R L = 8 Ω, C L = pf, Vcc = 12 V OPTEK Technology Inc Wallace Drive, Carrollton, Texas 76 Phone: (972) 3232 or (8) FAX: (972) sensors@optekinc.com Page 7 of 9
8 Hallogic Halleffect Sensors Typical Operate & Release s 3 & Release s vs Temperature OH9, OH18 & OH36 4 & Release s vs Temperature OH_313, OH_319 & OH_3 3 3 Magnetic Flux Level 2 1 OH18 Operate OH18 Release OH36 Operate OH36 Release OH9 Operate Magnetic Flux Level OH_3 Operate OH_3 Release OH_319 Operate OH_319 Release OH_313 Operate OH_313 Release OH9 Release 6 C 4 C C C C 4 C 6 C 8 C C 1 C 14 C 16 C 6 C 4 C C C C 4 C 6 C 8 C C 1 C 14 C 16 C 2 & Release s vs Temperature OH_33 & OH_34 2 & Release s vs Temperature Magnetic Flux Level 1 OH_34 Operate OH_34 Release OH_33 Operate OH_33 Release Manetic Flux Level 1 OH_375 1 OH_375 6 C 4 C C C C 4 C 6 C 8 C C 1 C 14 C 16 C Page 8 of 9 OPTEK Technology Inc Wallace Drive, Carrollton, Texas 76 Phone: (972) 3232 or (8) FAX: (972) sensors@optekinc.com
9 Hallogic Halleffect Sensors Rise & Fall Time vs Temperature 3 3 Magnetic Field 2 Rise Time V OH V OL 9% 1% Tf Tr 9% 1% Typical Time (ns) 1 Fall Time Vcc 1 U.U.T. 8 Ohm Output 3 Ground 2 pf 4 C C 4 C 8 C 1 C 1 C 9. Icc vs Temperature.4 Saturation Voltage vs Temperature Typical Icc (ma) Icc ON (ma) Icc OFF (ma) Typical Saturation Voltage (V) R L = 8 ohms C C 4 C 8 C 1 C 1 C.1 4 C C 4 C 8 C 1 C 1 C OPTEK Technology Inc Wallace Drive, Carrollton, Texas 76 Phone: (972) 3232 or (8) FAX: (972) sensors@optekinc.com Page 9 of 9
Hallogic Hall-Effect Sensors OH090U, OH180U, OH360U OHN3000 series, OHS3000 series OHN3100 series, OHS3100 series
Hallogic HallEffect Sensors OH9U, OH18U, OH36U OHN3 series, OHS3 series OHN3 series, OHS3 series Features: Designed for noncontact switching operations Operates over broad range of supply voltages (4.5
High Reliability Hallogic Hall- Effect Sensors OMH090, OMH3019, OMH3020, OMH3040, OMH3075, OMH3131 (B, S versions)
High Reliability Hallogic Hall Features: Designed for noncontact switching operations Operates over a broad range of supply voltages Excellent temperature stability operates in harsh environments Suitable
OPL800, OPL800-OC, OPL801, OPL801-OC, OPL810, OPL810-OC, OPL811, OPL811-OC, OPL812-OC, OPL813-OC, OPL820, OPL820-OC, OPL821-OC
OPL800, OPL800OC, OPL801, OPL801OC, OPL810, OPL810OC, OPL811, OPL811OC, OPL812OC, OPL813OC,, OC, OPL821OC Features: Four output options available High noise immunity Direct TTL/LSTTL interface TO18 hermetically
Photologic Sensor OPL530, OPL531, OPL535, OPL536, OPL550, OPL551, OPL560, OPL561, OPL562, OPL563
Photologic Seor Features: Choice of four output optio in lowcost sidelooking package Choice of two seitivity optio (OPL60/61/62/63) High noise immunity Direct TTL/LSTTL CMOS interface Data rates to 20
OPL530, OPL531, OPL535, OPL536, OPL550, OPL551, OPL560, OPL561, OPL562, OPL563
Features: Choice of four output optio in lowcost sidelooking package Choice of two seitivity optio (OPL560/561/562/563) High noise immunity Direct TTL/LSTTL CMOS interface Data rates to 250 kbaud for all
Base Part Number Package Output Type - with Light. Internal 10K - High Internal 10K - Low Internal 10K - High Internal 10K - Low.
Choice of four output optio in lowcost sidelooking package Choice of two seitivity optio (OPL560/561/562/563) High noise immunity Direct TTL/LSTTL CMOS interface Data rates to 250 kbaud for all except
UNISONIC TECHNOLOGIES CO., LTD
UNISONIC TECHNOLOGIES CO., LTD COMPLEMENTARY OUTPUT HALL EFFECT LATCH DESCRIPTION The UTC H654 is integrated Hall sensors with complementary output drivers designed for electronic commutation of brushless
ATS177. General Description. Features. Applications. Ordering Information SINGLE OUTPUT HALL EFFECT LATCH ATS177 - P L - X - X
Features General Description 3.5V to 20V DC operation voltage Temperature compensation Wide operating voltage range Open-Collector pre-driver 25mA maximum sinking output current Reverse polarity protection
HIGH VOLTAGE HALL EFFECT LATCH General Description. Features. Applications
General Description The is an integrated Hall sensor with output driver designed for electronic commutation of brushless DC motor applications. The device includes an onchip Hall sensor for magnetic sensing,
Block Diagram 1 REG. VCC 2 Hall Plate Amp B 3 GND 4 Pin Assignment 277 (276) Front View 1 : VCC 2 : 3 : B :GND Name P/I/O Pin # Desc
E-MAIL: Features - On-chip Hall sensor with two different sensitivity and hysteresis settings for - 3.5V to 2V operating voltage - 4mA (avg) output sink current - Build-in protecting diode only for chip
Hi-Reliability Optically Coupled Isolator
HiReliability Optically Coupled Isolator Features: TO78 hermetically sealed package High current transfer ratio 1 k electrical isolation Base contact provided for conventional transistor biasing TX and
UNISONIC TECHNOLOGIES CO., LTD
UNISONIC TECHNOLOGIES CO., LTD COMPLEMENTARY OUTPUTS HALL EFFECT LATCH IC DESCRIPTION The UTC UH276 is a Latch-Type Hall Effect sensor with built-in complementary output drivers. It s designed with internal
UNISONIC TECHNOLOGIES CO., LTD
UNISONIC TECHNOLOGIES CO., LTD COMPLEMENTARY OUTPUTS HALL EFFECT LATCH IC DESCRIPTION The UTC UH277 is a Latch-Type Hall Effect sensor with built-in complementary output drivers. It s designed with internal
ATS276 X - P X - B - X. Lead Free L : Lead Free G : Green
Features General Description On-Chip Hall Sensor with Two Different Sensitivity and Hysteresis Settings for ATS276 3.5V to 2V Operating Voltage 4mA (avg.) Output Sink Current Built-in Protecting Diode
UNISONIC TECHNOLOGIES CO., LTD
UNISONIC TECHNOLOGIES CO., LTD BIPOLAR LATCH TYPE HALL EFFECT FOR HIGH-TEMPERATURE OPERATION DESCRIPTION 1 SIP-3 The UTC SK1816 is a semiconductor integrated circuit utilizing the Hall effect. It designed
UNISONIC TECHNOLOGIES CO., LTD
UNISONIC TECHNOLOGIES CO., LTD BIPOLAR LATCH TYPE HALL EFFECT FOR HIGH-TEMPERATURE OPERATION DESCRIPTION 1 SIP-3 The UTC SK1816 is a semiconductor integrated circuit utilizing the Hall effect. It designed
UNISONIC TECHNOLOGIES CO., LTD
UNISONIC TECHNOLOGIES CO., LTD BIPOLAR LATCH TYPE HALL EFFECT FOR HIGH-TEMPERATURE OPERATION DESCRIPTION The UTC SK1816 is a semiconductor integrated circuit utilizing the Hall effect. It designed to operate
HAL501...HAL506, HAL508 Hall Effect Sensor ICs MICRONAS INTERMETALL MICRONAS. Edition May 5, DS
MICRONAS INTERMETALL HAL1...HAL, HAL Hall Effect Sensor ICs Edition May, 1997 1--1DS MICRONAS HAL1...HAL HAL Hall Effect Sensor IC in CMOS technology Common Features: switching offset compensation at khz
General Description DTS27X X -X X X -X. Lead. 27X coil1. R1 = R2 = 470Ω C1 = C2 = 2.2 μ F The R, C value need to be fine tuned base on coils design.
Features - On-chip Hall sensor with two different sensitivity and hysteresis settings for - 3.5V to 18V operating voltage - 35mA (avg) output sink current - Built-in protecting diode only for chip reverse
MM74C14 Hex Schmitt Trigger
MM74C14 Hex Schmitt Trigger General Description The MM74C14 Hex Schmitt Trigger is a monolithic complementary MOS (CMOS) integrated circuit constructed with N- and P-channel enhancement transistors. The
MM74C14 Hex Schmitt Trigger
MM74C14 Hex Schmitt Trigger General Description The MM74C14 Hex Schmitt Trigger is a monolithic complementary MOS (CMOS) integrated circuit constructed with N- and P-channel enhancement transistors. The
MT3451 Series BiCMOS, Latch, Hall-Effect Magnetic Position Sensors
Features and Benefits BiCMOS Technology Magnetic Type: Latch Wide Operating Voltage Range: Supply Voltage 2.8~24V Specified Operating Temperature Range: From -40 ~ 150 High Magnetic Sensitivity B OP =20Gauss,
N-Channel Enhancement-Mode Vertical DMOS FET
N-Channel Enhancement-Mode Vertical DMOS FET Features Free from secondary breakdown Low power drive requirement Ease of paralleling Low C ISS and fast switching speeds Excellent thermal stability Integral
CD40106BC Hex Schmitt Trigger
CD40106BC Hex Schmitt Trigger General Description The CD40106BC Hex Schmitt Trigger is a monolithic complementary MOS (CMOS) integrated circuit constructed with N and P-channel enhancement transistors.
4-PIN PHOTOTRANSISTOR OPTOCOUPLERS
PACKAGE HAA84 SCHEMATIC 4 COLLECTOR 4 2 3 EMITTER DESCRIPTION The HAA84 Series consists of two gallium arsenide infrared emitting diodes, connected in inverse parallel, driving a single silicon phototransistor
L4970A 10A SWITCHING REGULATOR
L4970A 10A SWITCHING REGULATOR 10A OUTPUT CURRENT.1 TO 40 OUTPUT OLTAGE RANGE 0 TO 90 DUTY CYCLE RANGE INTERNAL FEED-FORWARD LINE REGULA- TION INTERNAL CURRENT LIMITING PRECISE.1 ± 2 ON CHIP REFERENCE
Discontinued Product
Discontinued Product This device is no longer in production. The device should not be purchased for new design applications. Samples are no longer available. Date of status change: November 1, 21 Recommended
MM74C150 MM82C19 16-Line to 1-Line Multiplexer 3-STATE 16-Line to 1-Line Multiplexer
MM74C150 MM82C19 16-Line to 1-Line Multiplexer 3-STATE 16-Line to 1-Line Multiplexer General Description The MM74C150 and MM82C19 multiplex 16 digital lines to 1 output. A 4-bit address code determines
9A HIGH-SPEED MOSFET DRIVERS
9A HIGH-SPEED MOSFET DRIVERS 9A HIGH-SPEED MOSFET DRIVERS FEATURES Tough CMOS Construction High Peak Output Current.................. 9A High Continuous Output Current........ 2A Max Fast Rise and Fall
MM74C908 Dual CMOS 30-Volt Relay Driver
Dual CMOS 30-Volt Relay Driver General Description The MM74C908 is a general purpose dual high voltage driver capable of sourcing a minimum of 250 ma at V OUT = V CC 3V, and T J = 65 C. The MM74C908 consists
MM54C14 MM74C14 Hex Schmitt Trigger
MM54C14 MM74C14 Hex Schmitt Trigger General Description The MM54C14 MM74C14 Hex Schmitt Trigger is a monolithic complementary MOS (CMOS) integrated circuit constructed with N- and P-channel enhancement
PIN Silicon Photodiode OP950 Series
Features: Epoxy package Linear response vs. irradiance Fast switching me Choice of wide or extra wide receiving angle Side-looker package Small package style ideal for space-limited applica ons OP950 OP954
OP550, OP552, OP555, OP560, OP565, OP750 Series
OP552 Features: Wide receiving angle Four sensitivity ranges Sidelooking package Ideal for spacelimited applications Ideal for PCBoard mounting Choice of clear, opaque or bluetinted package OP550 OP5 OP750
PIN Silicon Photodiode OP950 Series
Features: Epoxy package Linear response vs. irradiance Fast switching me Choice of wide or extra wide receiving angle Side-looker package Small package style ideal for space-limited applica ons OP955 Description:
4-PIN PHOTOTRANSISTOR OPTOCOUPLERS
PACKAGE HAA84 SCHEMATIC 4 COLLECTOR 4 2 3 EMITTER DESCRIPTION The HAA84 Series consists of two gallium arsenide infrared emitting diodes, connected in inverse parallel, driving a single silicon phototransistor
High Speed MOSFET Drivers
High Speed MOSFET Drivers AS / AS9 FEATURES Latch Up Protected......................... >.A Logic Input Swing..................... Negative ESD........................................ k Matched Rise and
Schmitt-Trigger Inverter/ CMOS Logic Level Shifter
Schmitt-Trigger Inverter/ CMOS Logic Level Shifter with LSTTL Compatible Inputs The is a single gate CMOS Schmitt trigger inverter fabricated with silicon gate CMOS technology. It achieves high speed operation
N-Channel Enhancement-Mode Vertical DMOS FET
N-Channel Enhancement-Mode Vertical DMOS FET Features Free from secondary breakdown Low power drive requirement Ease of paralleling Low C ISS and fast switching speeds Excellent thermal stability Integral
Hall-Effect Latch / Bipolar Switch
2 - FEATURES AND BENEFITS AEC-Q1 automotive qualified Quality managed (QM), ISO 26262 compliant High-speed, 4-phase chopper stabilization Low operating voltage down to 3 V High sensitivity Stable switchpoints
C2D10120A Silicon Carbide Schottky Diode Zero Recovery Rectifier
C2D112A Silicon Carbide Schottky Diode Zero Recovery Rectifier RM RM = 12 12 V V ( =135 C) = 1 = 14.5 A A Q c = 61 nc 61 nc Q c Features 1.2kV Schottky Rectifier Zero Reverse Recovery Current Zero Forward
N-Channel Enhancement-Mode Vertical DMOS FETs
VN16 N-Channel Enhancement-Mode Vertical DMOS FETs Features Free from secondary breakdown Low power drive requirement Ease of paralleling Low C ISS and fast switching speeds High input impedance and high
Optocoupler SMD, SOP and SSOP Packages OPIA400 through OPIA414
Features: 2,500 to 5,000 Vrms electrical isolation Choice of a Single and Dual LED Phototransistor or Photo Darlington Sensor Lowcost plastic DualInLine (DIP) package Agency Approvals: UL Certification
Continuous-Time Switch Family
Features and enefits Continuous-time operation Fast power-on time Low noise Stable operation over full operating temperature range Reverse battery protection Solid-state reliability Factory-programmed
HIGH SPEED-10 MBit/s LOGIC GATE OPTOCOUPLERS
DESCRIPTION The / optocouplers consist of an AlGaAS LED, optically coupled to a very high speed integrated photo-detector logic gate with a strobable output. The devices are housed in a compact small-outline
74LS75 Quad Latch. DM74LS75 Quad Latch. General Description. Ordering Code: Logic Diagram. Connection Diagram. Function Table (Each Latch)
74LS75 Quad Latch General Description These latches are ideally suited for use as temporary storage for binary information between processing units and input/output or indicator units. Information present
C2D20120D Silicon Carbide Schottky Diode Zero Recovery Rectifier
C2D212D Silicon Carbide Schottky Diode Zero Recovery Rectifier RM = 12 V ( =135 C) = 29 A ** Q c = 122 nc ** Features 1.2kV Schottky Rectifier Zero Reverse Recovery Zero Forward Recovery High-Frequency
DM74S373 DM74S374 3-STATE Octal D-Type Transparent Latches and Edge-Triggered Flip-Flops
3-STATE Octal D-Type Transparent Latches and Edge-Triggered Flip-Flops General Description These 8-bit registers feature totem-pole 3-STATE outputs designed specifically for driving highly-capacitive or
C2D10120A Silicon Carbide Schottky Diode Zero Recovery Rectifier
Datasheet: 2D112 Rev. D 2D112A Silicon arbide Schottky Diode Zero Recovery Rectifier RM = 12 V = 1 A Q c = 61 n Features 12-Volt Schottky Rectifier Zero Reverse Recovery urrent Zero Forward Recovery Voltage
1.0 Amp Output Current IGBT Gate Drive Photocoupler with Rail-to-Rail Output Voltage in Stretched SO6
.0 Amp Output Current IGBT Gate Drive Photocoupler with Rail-to-Rail Output Voltage in Stretched SO. Description The Photocoupler is ideally suited for driving power IGBTs and MOSFETs used in motor control
MOC8111 MOC8112 MOC8113
PACKAGE SCHEMATIC ANODE 6 N/C 6 6 CATHODE 2 5 COLLECTOR N/C 3 4 EMITTER 6 DESCRIPTION The MOC8X series consists of a Gallium Arsenide IRED coupled with an NPN phototransistor. The base of the transistor
NTE74HC109 Integrated Circuit TTL High Speed CMOS, Dual J K Positive Edge Triggered Flip Flop w/set & Reset
NTE74HC109 Integrated Circuit TTL High Speed CMOS, Dual J K Positive Edge Triggered Flip Flop w/set & Reset Description: The NTE74HC109 is a dual J K flip flip with set and reset in a 16 Lead plastic DIP
M63954P. HVIC Half-Bridge Driver
M9P Powerex, Inc., Hillis Street, Youngwood, Pennsylvania 97- (7) 9-77 HVIC Half-Bridge Driver 9 E e c Description: M9P is a high voltage integrated circuit designed for electronic ballast, Power MOSFET
Photocoupler Product Data Sheet LTV-60L series LITE-ON DCC RELEASE
Product Data Sheet Spec No. :DS7-215-87 Effective Date: 1/18/218 Revision: B LITE-ON DCC RELEASE BNS-OD-FC1/A4 LITE-ON Technology Corp. / Optoelectronics No.9,Chien 1 Road, Chung Ho, New Taipei City 23585,
C2D05120A Silicon Carbide Schottky Diode Zero Recovery Rectifier
C2D512A Silicon Carbide Schottky Diode Zero Recovery Rectifier RM = 12 V ( =135 C) = 8.5 A Q c = 28 nc Features 1.2kV Schottky Rectifier Zero Reverse Recovery Current Zero Forward Recovery Voltage High-Frequency
2 Input NAND Gate L74VHC1G00
Input NAND Gate The is an advanced high speed CMOS input NAND gate fabricated with silicon gate CMOS technology. It achieves high speed operation similar to equivalent Bipolar Schottky TTL while maintaining
74LS244 Octal 3-STATE Buffer/Line Driver/Line Receiver
74LS244 Octal 3-STATE Buffer/Line Driver/Line Receiver General Description These buffers/line drivers are designed to improve both the performance and PC board density of 3-STATE buffers/ drivers employed
NTE4514B & NTE4515B Integrated Circuit CMOS, 4 Bit Latch/4 to 16 Line Decoder
NTE4514B & NTE4515B Integrated Circuit CMOS, 4 Bit Latch/4 to 16 Line Decoder Description: The NTE4514B (output active high option) and NTE4515B (output active low option) are two output options of a 4
IRGP4263PbF IRGP4263-EPbF
IRGP3PbF IRGP3-EPbF Insulated Gate Bipolar Transistor V CES = 5V I C = 5A, T C =1 C C G G t SC 5.5µs, T J(max) = 175 C V CE(ON) typ. = 1.7V @ IC = A Applications Industrial Motor Drive Inverters UPS Welding
NTE4035B Integrated Circuit CMOS, 4 Bit Parallel In/Parallel Out Shift Register
NTE4035B Integrated Circuit CMOS, 4 Bit Parallel In/Parallel Out Shift Register Description: The NTE4035B is a 4 bit shift register in a 16 Lead DIP type package constructed with MOS P Channel an N Channel
CD4071BC CD4081BC Quad 2-Input OR Buffered B Series Gate Quad 2-Input AND Buffered B Series Gate
Quad 2-Input OR Buffered B Series Gate Quad 2-Input AND Buffered B Series Gate General Description The CD4071BC and CD4081BC quad gates are monolithic complementary MOS (CMOS) integrated circuits constructed
GENERAL PURPOSE 6-PIN PHOTOTRANSISTOR OPTOCOUPLERS
4N37 HA HA2 HA3 HA4 HA5 WHITE PACKAGE (-M SUFFIX) SCHEMATIC 2 3 NC PIN. ANODE 2. CATHODE 3. NO CONNECTION 4. EMITTER 5. COLLECTOR. BASE 5 4 BLACK PACKAGE (NO -M SUFFIX) DESCRIPTION The general purpose
DS Tap Silicon Delay Line FEATURES PIN ASSIGNMENT. PIN DESCRIPTION TAP 1 TAP 5 TAP Output Number +5 Volts
DS00 -Tap Silicon Delay Line FEATURES All-silicon time delay taps equally spaced Delay tolerance ± ns or ±%, whichever is greater Stable and precise over temperature and voltage range Leading and trailing
T C MEASURED POINT G1 E1 E2 G2 W - (4 PLACES) G2 E2 E1 G1
CMDU-3KA Powerex, Inc., Hillis Street, Youngwood, Pennsylvania 15697-1 (7) 95-77 Dual IGBTMOD KA-Series Module Amperes/17 Volts B F A G T C MEASURED POINT M C L T - ( TYP.) N R Z CE1 E C1 C E AA S - (3
MM74C221 Dual Monostable Multivibrator
MM74C221 Dual Monostable Multivibrator General Description The MM74C221 dual monostable multivibrator is a monolithic complementary MOS integrated circuit. Each multivibrator features a negative-traition-triggered
HIGH SPEED TRANSISTOR OPTOCOUPLERS
SINGLECHANNEL: PACKAGE SCHEMATIC N/C V CC + V CC V F + V F 7 V B _ 7 V 0 _ V O _ V 0 V F N/C 4 5 GND + 4 5 GND,,, Pin 7 is not connected in Part Number / DESCRIPTION The /, / and / optocouplers consist
MM74C90 MM74C93 4-Bit Decade Counter 4-Bit Binary Counter
4-Bit Decade Counter 4-Bit Binary Counter General Description The MM74C90 decade counter and the MM74C93 binary counter and complementary MOS (CMOS) integrated circuits constructed with N- and P-channel
MM74C906 Hex Open Drain N-Channel Buffers
Hex Open Drain N-Channel Buffers General Description The MM74C906 buffer employs monolithic CMOS technology in achieving open drain outputs. The MM74C906 consists of six inverters driving six N-channel
CD4049UBC CD4050BC Hex Inverting Buffer Hex Non-Inverting Buffer
CD4049UBC CD4050BC Hex Inverting Buffer Hex Non-Inverting Buffer General Description The CD4049UBC and CD4050BC hex buffers are monolithic complementary MOS (CMOS) integrated circuits constructed with
74LVQ138 Low Voltage 1-of-8 Decoder/Demultiplexer
Low Voltage 1-of-8 Decoder/Demultiplexer General Description The LVQ138 is a high-speed 1-of-8 decoder/demultiplexer. This device is ideally suited for high-speed bipolar memory chip select address decoding.
Photocoupler Product Data Sheet 6N137 series Spec No.: DS Effective Date: 04/25/2014 LITE-ON DCC RELEASE
Photocoupler Product Data Sheet Spec No.: DS70-2008-0035 Effective Date: 04/25/2014 Revision: B LITE-ON DCC RELEASE BNS-OD-FC001/A4 LITE-ON Technology Corp. / Optoelectronics No.90,Chien 1 Road, Chung
IRGB8B60KPbF IRGS8B60KPbF IRGSL8B60KPbF C
INSULATED GATE BIPOLAR TRANSISTOR Features Low VCE (on) Non Punch Through IGBT Technology. 1µs Short Circuit Capability. Square RBSOA. Positive VCE (on) Temperature Coefficient. Lead-Free. Benefits Benchmark
MM74HC574 3-STATE Octal D-Type Edge-Triggered Flip-Flop
3-STATE Octal D-Type Edge-Triggered Flip-Flop General Description The MM74HC574 high speed octal D-type flip-flops utilize advanced silicon-gate P-well CMOS technology. They possess the high noise immunity
MM74HC157 Quad 2-Input Multiplexer
Quad 2-Input Multiplexer General Description The MM74HC157 high speed Quad 2-to-1 Line data selector/multiplexers utilizes advanced silicon-gate CMOS technology. It possesses the high noise immunity and
PHOTODARLINGTON OPTICAL INTERRUPTER SWITCH
HB HB HB3 PACKAGE DIMENSIONS 0.7 (.0) 0.57 (.6) C L 0.9 (6.35) 0.3 (6.5) D E C L 0.39 (.00) 0.3 (0.85).33 (3.38).073 (.85) 0.9 (3.3) 0.9 (3.0) 0.33 (.0) 0. (0.7) Optical C L 0.5 (3.) 0.9 (3.0).35 (8.00).95
IRGB30B60KPbF IRGS30B60KPbF IRGSL30B60KPbF
PD - 973 INSULATED GATE BIPOLAR TRANSISTOR Features Low VCE (on) Non Punch Through IGBT Technology 1µs Short Circuit Capability Square RBSOA G Positive VCE (on) Temperature Coefficient Maximum Junction
Features Y Wide supply voltage range 3 0V to 15V. Y High noise immunity 0 45 VDD (typ ) Y Low power TTL fan out of 2 driving 74L
CD4025 CD4023BM CD4023BC Buffered Triple 3-Input NAND Gate CD4025BM CD4025BC Buffered Triple 3-Input NOR Gate General Description These triple gates are monolithic complementary MOS (CMOS) integrated circuits
MM74HC151 8-Channel Digital Multiplexer
8-Channel Digital Multiplexer General Description The MM74HC151 high speed Digital multiplexer utilizes advanced silicon-gate CMOS technology. Along with the high noise immunity and low power dissipation
MM54C221 MM74C221 Dual Monostable Multivibrator
MM54C221 MM74C221 Dual Monostable Multivibrator General Description The MM54C221 MM74C221 dual monostable multivibrator is a monolithic complementary MOS integrated circuit Each multivibrator features
MM74HC373 3-STATE Octal D-Type Latch
3-STATE Octal D-Type Latch General Description The MM74HC373 high speed octal D-type latches utilize advanced silicon-gate CMOS technology. They possess the high noise immunity and low power consumption
GENERAL PURPOSE 6-PIN PHOTOTRANSISTOR OPTOCOUPLERS
TIL TIL-M TIL7-M MOC800-M WHITE PACKAGE (-M SUFFIX) SCHEMATIC 2 3 NC 5 4 PIN. ANODE 2. CATHODE 3. NO CONNECTION 4. EMITTER 5. COLLECTOR. BASE BLACK PACKAGE (NO -M SUFFIX) DESCRIPTION The MOC800, TIL and
SN74LS151D LOW POWER SCHOTTKY
The TTL/MSI SN74LS5 is a high speed 8-input Digital Multiplexer. It provides, in one package, the ability to select one bit of data from up to eight sources. The LS5 can be used as a universal function
IR2106/IR21064 IR2107/IR21074 HIGH AND LOW SIDE DRIVER
Features Floating channel designed for bootstrap operation Fully operational to +00V Tolerant to negative transient voltage dv/dt immune Gate drive supply range from 0 to 0V Undervoltage lockout for both
1-OF-8 DECODER/DEMULTIPLEXER High-Speed Silicon-Gate CMOS
1-OF-8 DECODER/DEMULTIPLEXER High-Speed Silicon-Gate CMOS The IN74ACT138 is identical in pinout to the LS/ALS138, HC/HCT138. The IN74ACT138 may be used as a level converter for interfacing TTL or NMOS
NTE4501 Integrated Circuit CMOS, Dual 4 Input NAND Gate, 2 Input NOR/OR Gate, 8 Input AND/NAND Gate
NTE4501 Integrated Circuit CMOS, Dual 4 Input NAND Gate, 2 Input NOR/OR Gate, 8 Input AND/NAND Gate Description: The NTE4501 is a triple gate device in a 16 Lead DIP type package constructed with MOS P
=25 C Avalanche Energy, single pulse 65 I C. C Soldering Temperature, for 10 seconds 300, (0.063 in. (1.6mm) from case)
PD- 94117 IRGP2B12U-E INSULATED GATE BIPOLAR TRANSISTOR Features UltraFast IGBT UltraFast Non Punch Through (NPT) Technology 1 µs Short Circuit capability Square RBSOA Positive V CE (on) Temperature Coefficient
CID Insulated Gate Bipolar Transistor with Silicon Carbide Schottky Diode Zero Recovery Rectifier
CID566 Insulated Gate Bipolar Transistor with Silicon Carbide Schottky Diode Zero Recovery Rectifier Features Package CES = 6 = 5 A, T C = C T sc > µs, =5 C CE(on) Typ. =.8 Zero Reverse Recovery Diode
Photocoupler Product Data Sheet LTV-0601 Spec No.: DS Effective Date: 07/06/2016 LITE-ON DCC RELEASE
Product Data Sheet LTV-0601 Spec No.: DS70-2013-0015 Effective Date: 07/06/2016 Revision: C LITE-ON DCC RELEASE BNS-OD-FC001/A4 LITE-ON Technology Corp. / Optoelectronics No.90,Chien 1 Road, Chung Ho,
PHOTOTRANSISTOR OPTOCOUPLERS
MCT MCTE MCT0 MCT7 MCT00 MCT0 MCT0 WHITE PACKAGE (-M SUFFIX) BLACK PACKAGE (NO -M SUFFIX) DESCRIPTION The MCTXXX series optoisolators consist of a gallium arsenide infrared emitting diode driving a silicon
CD4093BC Quad 2-Input NAND Schmitt Trigger
CD4093BC Quad 2-Input NAND Schmitt Trigger General Description The CD4093B consists of four Schmitt-trigger circuits. Each circuit functions as a 2-input NAND gate with Schmitttrigger action on both inputs.
HIGH SPEED TRANSISTOR OPTOCOUPLERS
DESCRIPTION The HCPL05XX, and HCPL04XX optocouplers consist of an AlGaAs LED optically coupled to a high speed photodetector transistor housed in a compact pin small outline package. A separate connection
MM74C373 MM74C374 3-STATE Octal D-Type Latch 3-STATE Octal D-Type Flip-Flop
MM74C374 3-STATE Octal D-Type Latch 3-STATE Octal D-Type Flip-Flop General Description The and MM74C374 are integrated, complementary MOS (CMOS), 8-bit storage elements with 3- STATE outputs. These outputs
MM74C175 Quad D-Type Flip-Flop
Quad D-Type Flip-Flop General Description The MM74C175 coists of four positive-edge triggered D- type flip-flops implemented with monolithic CMOS technology. Both are true and complemented outputs from
n-channel Solar Inverter Induction Heating G C E Gate Collector Emitter
INSULATED GATE BIPOLAR TRANSISTOR WITH ULTRAFAST SOFT RECOVERY DIODE Features C Low V CE (ON) trench IGBT technology Low switching losses Square RBSOA 1% of the parts tested for I LM Positive V CE (ON)
MM74C912 6-Digit BCD Display Controller/Driver
6-Digit BCD Display Controller/Driver General Description The display controllers are interface elements, with memory, that drive a 6-digit, 8-segment LED display. The display controllers receive data
MM74C85 4-Bit Magnitude Comparator
4-Bit Magnitude Comparator General Description The MM74C85 is a four-bit magnitude comparator which will perform comparison of straight binary or BCD codes. The circuit consists of eight comparing inputs
General Purpose Transistors
General Purpose Transistors NPN and PNP Silicon These transistors are designed for general purpose amplifier applications. They are housed in the SOT 33/SC which is designed for low power surface mount
MM74HC573 3-STATE Octal D-Type Latch
MM74HC573 3-STATE Octal D-Type Latch General Description The MM74HC573 high speed octal D-type latches utilize advanced silicon-gate P-well CMOS technology. They possess the high noise immunity and low
MM74HC244 Octal 3-STATE Buffer
MM74HC244 Octal 3-STATE Buffer General Description The MM74HC244 is a non-inverting buffer and has two active low enables (1G and 2G); each enable independently controls 4 buffers. This device does not
NTE74177 Integrated Circuit TTL 35Mhz Presettable Binary Counter/Latch
NTE74177 Integrated Circuit TTL 35Mhz Presettable Binary Counter/Latch Description: The NTE74177 is a high speed monolithic counter in a 14 Lead plastic DIP type package consisting of four DC coupled master
MT4103 Series Uni-polar, Hall-Effect
Unipolar, HallEffect Magnetic Position ensors Features and Benefits Bipolar Technology Magnetic Type: Unipolar Wide Operating Voltage Range: upply Voltage 3.8~30V pecified Operating Temperature Range: