High Reliability Hallogic Hall- Effect Sensors OMH090, OMH3019, OMH3020, OMH3040, OMH3075, OMH3131 (B, S versions)

Size: px
Start display at page:

Download "High Reliability Hallogic Hall- Effect Sensors OMH090, OMH3019, OMH3020, OMH3040, OMH3075, OMH3131 (B, S versions)"

Transcription

1 High Reliability Hallogic Hall Features: Designed for noncontact switching operations Operates over a broad range of supply voltages Excellent temperature stability operates in harsh environments Suitable for military and space applications Processing patterned after class B or S of MILSTD3 Through Hole 0.40 [.16 mm] lead length minimum ESD Rating of Class 3B per MILSTD3G, M301.7, HB model. Description: These Halleffect devices contain a monolithic integrated circuit which incorporates a Hall element, a linear amplifier, a threshold amplifier, and Schmitt trigger on a single Hallogic silicon chip. Included onchip is a bandgap voltage regulator that allows operation with a wide range of supply voltages. These devices feature logic level output and provide up to 21 ma of sink current. This allows direct driving of more than 7 TTL loads or any standard logic family using power supplies ranging from 4. to 24 volts. Output amplitude is constant at switching frequencies from DC to over 0 khz. The UniPolar turns on with a (logic level 0 ) after a sufficient magnetic field from the south pole of a magnet approaches the symbolized face of the device (operating point) and turns off (logic level 1 ) after the magnetic field reaches a minimum value. The BiPolar device turns on (logic level 0 ) in the presence of a magnetic south pole and turns off (logic level 1 ) when subjected to a magnetic north pole. Both magnetic poles are necessary for operation for BiPolar devices. This feature makes these sensors ideal for applications in noncontact switching operations, brushless DC motors and for use with multiple pole magnets. B and S devices are processed to OPTEK s military screening program patterned after MILSTD3. This product has passed Radiation Hardness testing up to 30 Krad (si) per MILSTD 3 method 19.6 and up to 10 Krad (si) for ELDRS. Contact your local representative or OPTEK for more information. Applications: Ceramic Package Noncontact switching operations Brushless DC motors Multiple pole magnets Noncontact reflective object sensor Assembly line automation Machine automation Machine safety End of travel sensor Door sensor Pin # Description 1 V CC 2 Ground 3 Output * Add capacitor for stable opera on Lead finish = Solder Dipped (Sn 63/37) DIMENSIONS ARE IN: [MILLIMETERS] INCHES Issue K1 0/16 Page 1

2 High Reliability Hallogic Hall Absolute Maximum Ratings (T A = 2 C unless otherwise noted) Supply Voltage, V CC Storage Temperature Range, T S Operating Temperature Range, T A 2 V 6 C to +10 C C to Lead Soldering Temperature (1/ in. (3.2 mm) from case for seconds with soldering iron) 2 C (1) Output ON Current, I SINK Output OFF Voltage, V OUT Magnetic Flux Density, B (1) Heat sink leads during hand soldering. 2 ma 2 V Unlimited Part Number HiReliability Hallogic Sensor Operate Point Min / Typ / Max Release Point Min / Typ / Max Hysteresis Min / Typ / Max V CC (Volts) Min / Max Package OMH090B OMH090S 0/90/ 30 / 6 / 1 / 30 / OMH3019B OMH3019S 17 / / / 23 / 4 30 / 0 / 1 OMH30B OMH30S OMH3040B OMH3040S UniPolar NonLatching 70 / 2 / 30 0 / / / / 0 70 / 10 / 0 0 / 11 / / 3 / 4. / 24.0 Through Hole OMH3131B OMH3131S / / 9 / 4 / / 1 / 40 OMH307B OMH307S BiPolar Latching 0 / 10 / / 10 / 0 0 / / 00 Issue K1 0/16 Page 2

3 High Reliability Hallogic Hall Electrical Characteristics (V CC = 4. V to 24 V, T A = 2 C unless otherwise noted) OMH090, OMH090B, OMH090S UniPolar I CC V OL I OH Supply Current Output Saturation Voltage Output Leakage Current t r Output Rise Time μs t f Output Fall Time μs ma mv μa C C C & C,V CC = 24 V, Output On, B +2 C,V CC = 4. V, I OL = 30 ma,b & C,V CC = 24 V, V OUT =24 V, B +2 R L = Ω, C L = pf, V CC = 14 V Electrical Characteristics (Vcc = 4. V to 24 V, T A = 2 C unless otherwise noted) OMH3019, OMH3019B, OMH3019S UniPolar C & C & C to I CC Supply Current 9 ma V CC = 24 V, Output On, B 0 V OL Output Saturation Voltage 12 mv V CC = 4. V, I OL = 1 ma, B 00 I OH Output Leakage Current μa V CC = 24 V, V OUT = 24 V, B < 0 t r Output Rise Time μs t f Output Fall Time μs R L = 4 Ω, C L = pf, V CC = 12 V (1) South pole facing symbolized surface. Issue K1 0/16 Page 3

4 High Reliability Hallogic Hall Electrical Characteristics (V CC = 4. V to 24 V, T A = 2 C unless otherwise noted) OMH30, OMH30B, OMH30S UniPolar C & C & C & Icc Supply Current 4 7 ma V CC = 24 V, Output On, B 0 V OL Output Saturation Voltage 0 mv V CC = 4. V, I OL = 1 ma, B 30 I OH Output Leakage Current 0. μa V CC = 24 V, V OUT = 24 V, B 0 t r Output Rise Time μs t f Output Fall Time 0. 1 μs R L = Ω, C L = pf, V CC = 12 V Electrical Characteristics (V CC = 4. V to 24 V, T A = 2 C unless otherwise noted) OMH3040, OMH3040B, OMH3040S UniPolar Icc Supply Current (1) South pole facing symbolized surface ma C & C & C &, V CC = 24 V, Output On, B C V OL Output Saturation Voltage 0 mv V CC = 4. V, I OL = ma, B I OH Output Leakage Current 0. t r Output Rise Time μs t f Output Fall Time 0. 1 μs μa C, V CC = 24V, V OUT = 24V, B 7, V CC = 24V, V OUT = 24V, B 0,V CC = 24V, V OUT = 24V, B 7 G R L = Ω, C L = pf, V CC = 12 V Issue K1 0/16 Page 4

5 High Reliability Hallogic Hall Electrical Characteristics (V CC = 4. V to 24 V, T A = 2 C unless otherwise noted) OMH307, OMH307B, OMH307S BiPolar Latching I CC V OL Supply Current Output Saturation Voltage ma mv C & C & C &, V CC = 24 V, (Output On), B C C, V CC = 4. V, I OL = ma, B I OH Output Leakage Current μa V CC = 24 V, V OUT = 24 V, B t r Output Rise Time μs t f Output Fall Time 0. 1 μs R L = Ω, C L = pf, V cc = 12 V Electrical Characteristics (V CC = 4. V to 24 V, T A = 2 C unless otherwise noted) OMH3131, OMH3131B & OMH3131S UniPolar (1) South pole facing symbolized surface C to C to C to I CC Supply Current 4 7 ma V CC = 24 V, Output On, B > V OL Output Saturation Voltage 0 mv V CC = 4. V, I OL = 1 ma, B I OH Output Leakage Current 0. μa V CC = 24 V, V OUT = 24 V, B 0 t r Output Rise Time μs R L = Ω, C L = pf, V cc = 12 V t f Output Fall Time 0. 1 μs Issue K1 0/16 Page

6 High Reliability Hallogic Hall OMH307, OMH3131 (B, S) Magnetic Operate & Release Points vs Temperature Manetic Flux Level OMH3040 Operate OMH3040 Release OMH090 Operate OMH090 Release OMH3131 Operate OMH3131 Release Magnetic Operate & Release Points vs Temperature Manetic Flux Level OMH3019 Operate OMH3019 OMH30 Operate OMH307 Operate OMH30 Release 0 OMH307 Release Issue K1 0/16 Page 6

7 High Reliability Hallogic Hall OMH307, OMH3131 (B, S) B OP 30 Rise and Fall Time vs Temperature Magnetic Field Rise Time V OH V OL 90% % Tf Tr 90% % Typical Time (ns) 0 10 Fall Time 0 Vcc 1 Ohm Output 0 U.U.T. 3 Ground 2 pf 0 40 C 0 C 40 C 0 C 1 C 10 C 9.0 I CC vs Temperature 0.40 Saturation Voltage vs Temperature Typical Icc (ma) Icc ON (ma) Icc OFF (ma) Typical Saturation Voltage (V) R L = ohms C 0 C 40 C 0 C 1 C 10 C 40 C 0 C 40 C 0 C 1 C 10 C Issue K1 0/16 Page 7

Hallogic Hall-Effect Sensors OH090U, OH180U, OH360U OHN3000 series, OHS3000 series OHN3100 series, OHS3100 series

Hallogic Hall-Effect Sensors OH090U, OH180U, OH360U OHN3000 series, OHS3000 series OHN3100 series, OHS3100 series Hallogic HallEffect Sensors OH9U, OH18U, OH36U OHN3 series, OHS3 series OHN3 series, OHS3 series Features: Designed for noncontact switching operations Operates over broad range of supply voltages (4.5

More information

Hallogic Hall-effect Sensors OH090U, OH180U, OH360U OHN3000 Series, OHS3000 Series OHN3100 Series, OHS3100 Series

Hallogic Hall-effect Sensors OH090U, OH180U, OH360U OHN3000 Series, OHS3000 Series OHN3100 Series, OHS3100 Series Hallogic Halleffect Sensors Features: Designed for noncontact switching operations Operates over broad range of supply voltages (4.5 V to 24 V) Operates with excellent temperature stability in harsh environments

More information

OPL800, OPL800-OC, OPL801, OPL801-OC, OPL810, OPL810-OC, OPL811, OPL811-OC, OPL812-OC, OPL813-OC, OPL820, OPL820-OC, OPL821-OC

OPL800, OPL800-OC, OPL801, OPL801-OC, OPL810, OPL810-OC, OPL811, OPL811-OC, OPL812-OC, OPL813-OC, OPL820, OPL820-OC, OPL821-OC OPL800, OPL800OC, OPL801, OPL801OC, OPL810, OPL810OC, OPL811, OPL811OC, OPL812OC, OPL813OC,, OC, OPL821OC Features: Four output options available High noise immunity Direct TTL/LSTTL interface TO18 hermetically

More information

UNISONIC TECHNOLOGIES CO., LTD

UNISONIC TECHNOLOGIES CO., LTD UNISONIC TECHNOLOGIES CO., LTD COMPLEMENTARY OUTPUT HALL EFFECT LATCH DESCRIPTION The UTC H654 is integrated Hall sensors with complementary output drivers designed for electronic commutation of brushless

More information

OPL530, OPL531, OPL535, OPL536, OPL550, OPL551, OPL560, OPL561, OPL562, OPL563

OPL530, OPL531, OPL535, OPL536, OPL550, OPL551, OPL560, OPL561, OPL562, OPL563 Features: Choice of four output optio in lowcost sidelooking package Choice of two seitivity optio (OPL560/561/562/563) High noise immunity Direct TTL/LSTTL CMOS interface Data rates to 250 kbaud for all

More information

ATS177. General Description. Features. Applications. Ordering Information SINGLE OUTPUT HALL EFFECT LATCH ATS177 - P L - X - X

ATS177. General Description. Features. Applications. Ordering Information SINGLE OUTPUT HALL EFFECT LATCH ATS177 - P L - X - X Features General Description 3.5V to 20V DC operation voltage Temperature compensation Wide operating voltage range Open-Collector pre-driver 25mA maximum sinking output current Reverse polarity protection

More information

Photologic Sensor OPL530, OPL531, OPL535, OPL536, OPL550, OPL551, OPL560, OPL561, OPL562, OPL563

Photologic Sensor OPL530, OPL531, OPL535, OPL536, OPL550, OPL551, OPL560, OPL561, OPL562, OPL563 Photologic Seor Features: Choice of four output optio in lowcost sidelooking package Choice of two seitivity optio (OPL60/61/62/63) High noise immunity Direct TTL/LSTTL CMOS interface Data rates to 20

More information

HIGH VOLTAGE HALL EFFECT LATCH General Description. Features. Applications

HIGH VOLTAGE HALL EFFECT LATCH General Description. Features. Applications General Description The is an integrated Hall sensor with output driver designed for electronic commutation of brushless DC motor applications. The device includes an onchip Hall sensor for magnetic sensing,

More information

Base Part Number Package Output Type - with Light. Internal 10K - High Internal 10K - Low Internal 10K - High Internal 10K - Low.

Base Part Number Package Output Type - with Light. Internal 10K - High Internal 10K - Low Internal 10K - High Internal 10K - Low. Choice of four output optio in lowcost sidelooking package Choice of two seitivity optio (OPL560/561/562/563) High noise immunity Direct TTL/LSTTL CMOS interface Data rates to 250 kbaud for all except

More information

Block Diagram 1 REG. VCC 2 Hall Plate Amp B 3 GND 4 Pin Assignment 277 (276) Front View 1 : VCC 2 : 3 : B :GND Name P/I/O Pin # Desc

Block Diagram 1 REG. VCC 2 Hall Plate Amp B 3 GND 4 Pin Assignment 277 (276) Front View 1 : VCC 2 : 3 : B :GND Name P/I/O Pin # Desc E-MAIL: Features - On-chip Hall sensor with two different sensitivity and hysteresis settings for - 3.5V to 2V operating voltage - 4mA (avg) output sink current - Build-in protecting diode only for chip

More information

UNISONIC TECHNOLOGIES CO., LTD

UNISONIC TECHNOLOGIES CO., LTD UNISONIC TECHNOLOGIES CO., LTD COMPLEMENTARY OUTPUTS HALL EFFECT LATCH IC DESCRIPTION The UTC UH276 is a Latch-Type Hall Effect sensor with built-in complementary output drivers. It s designed with internal

More information

UNISONIC TECHNOLOGIES CO., LTD

UNISONIC TECHNOLOGIES CO., LTD UNISONIC TECHNOLOGIES CO., LTD COMPLEMENTARY OUTPUTS HALL EFFECT LATCH IC DESCRIPTION The UTC UH277 is a Latch-Type Hall Effect sensor with built-in complementary output drivers. It s designed with internal

More information

UNISONIC TECHNOLOGIES CO., LTD

UNISONIC TECHNOLOGIES CO., LTD UNISONIC TECHNOLOGIES CO., LTD BIPOLAR LATCH TYPE HALL EFFECT FOR HIGH-TEMPERATURE OPERATION DESCRIPTION 1 SIP-3 The UTC SK1816 is a semiconductor integrated circuit utilizing the Hall effect. It designed

More information

UNISONIC TECHNOLOGIES CO., LTD

UNISONIC TECHNOLOGIES CO., LTD UNISONIC TECHNOLOGIES CO., LTD BIPOLAR LATCH TYPE HALL EFFECT FOR HIGH-TEMPERATURE OPERATION DESCRIPTION The UTC SK1816 is a semiconductor integrated circuit utilizing the Hall effect. It designed to operate

More information

UNISONIC TECHNOLOGIES CO., LTD

UNISONIC TECHNOLOGIES CO., LTD UNISONIC TECHNOLOGIES CO., LTD BIPOLAR LATCH TYPE HALL EFFECT FOR HIGH-TEMPERATURE OPERATION DESCRIPTION 1 SIP-3 The UTC SK1816 is a semiconductor integrated circuit utilizing the Hall effect. It designed

More information

MT3451 Series BiCMOS, Latch, Hall-Effect Magnetic Position Sensors

MT3451 Series BiCMOS, Latch, Hall-Effect Magnetic Position Sensors Features and Benefits BiCMOS Technology Magnetic Type: Latch Wide Operating Voltage Range: Supply Voltage 2.8~24V Specified Operating Temperature Range: From -40 ~ 150 High Magnetic Sensitivity B OP =20Gauss,

More information

HAL501...HAL506, HAL508 Hall Effect Sensor ICs MICRONAS INTERMETALL MICRONAS. Edition May 5, DS

HAL501...HAL506, HAL508 Hall Effect Sensor ICs MICRONAS INTERMETALL MICRONAS. Edition May 5, DS MICRONAS INTERMETALL HAL1...HAL, HAL Hall Effect Sensor ICs Edition May, 1997 1--1DS MICRONAS HAL1...HAL HAL Hall Effect Sensor IC in CMOS technology Common Features: switching offset compensation at khz

More information

ATS276 X - P X - B - X. Lead Free L : Lead Free G : Green

ATS276 X - P X - B - X. Lead Free L : Lead Free G : Green Features General Description On-Chip Hall Sensor with Two Different Sensitivity and Hysteresis Settings for ATS276 3.5V to 2V Operating Voltage 4mA (avg.) Output Sink Current Built-in Protecting Diode

More information

General Description DTS27X X -X X X -X. Lead. 27X coil1. R1 = R2 = 470Ω C1 = C2 = 2.2 μ F The R, C value need to be fine tuned base on coils design.

General Description DTS27X X -X X X -X. Lead. 27X coil1. R1 = R2 = 470Ω C1 = C2 = 2.2 μ F The R, C value need to be fine tuned base on coils design. Features - On-chip Hall sensor with two different sensitivity and hysteresis settings for - 3.5V to 18V operating voltage - 35mA (avg) output sink current - Built-in protecting diode only for chip reverse

More information

Discontinued Product

Discontinued Product Discontinued Product This device is no longer in production. The device should not be purchased for new design applications. Samples are no longer available. Date of status change: November 1, 21 Recommended

More information

MM74C150 MM82C19 16-Line to 1-Line Multiplexer 3-STATE 16-Line to 1-Line Multiplexer

MM74C150 MM82C19 16-Line to 1-Line Multiplexer 3-STATE 16-Line to 1-Line Multiplexer MM74C150 MM82C19 16-Line to 1-Line Multiplexer 3-STATE 16-Line to 1-Line Multiplexer General Description The MM74C150 and MM82C19 multiplex 16 digital lines to 1 output. A 4-bit address code determines

More information

4-PIN PHOTOTRANSISTOR OPTOCOUPLERS

4-PIN PHOTOTRANSISTOR OPTOCOUPLERS PACKAGE HAA84 SCHEMATIC 4 COLLECTOR 4 2 3 EMITTER DESCRIPTION The HAA84 Series consists of two gallium arsenide infrared emitting diodes, connected in inverse parallel, driving a single silicon phototransistor

More information

MM74C14 Hex Schmitt Trigger

MM74C14 Hex Schmitt Trigger MM74C14 Hex Schmitt Trigger General Description The MM74C14 Hex Schmitt Trigger is a monolithic complementary MOS (CMOS) integrated circuit constructed with N- and P-channel enhancement transistors. The

More information

MM74C908 Dual CMOS 30-Volt Relay Driver

MM74C908 Dual CMOS 30-Volt Relay Driver Dual CMOS 30-Volt Relay Driver General Description The MM74C908 is a general purpose dual high voltage driver capable of sourcing a minimum of 250 ma at V OUT = V CC 3V, and T J = 65 C. The MM74C908 consists

More information

2 Input NAND Gate L74VHC1G00

2 Input NAND Gate L74VHC1G00 Input NAND Gate The is an advanced high speed CMOS input NAND gate fabricated with silicon gate CMOS technology. It achieves high speed operation similar to equivalent Bipolar Schottky TTL while maintaining

More information

L4970A 10A SWITCHING REGULATOR

L4970A 10A SWITCHING REGULATOR L4970A 10A SWITCHING REGULATOR 10A OUTPUT CURRENT.1 TO 40 OUTPUT OLTAGE RANGE 0 TO 90 DUTY CYCLE RANGE INTERNAL FEED-FORWARD LINE REGULA- TION INTERNAL CURRENT LIMITING PRECISE.1 ± 2 ON CHIP REFERENCE

More information

Continuous-Time Switch Family

Continuous-Time Switch Family Features and enefits Continuous-time operation Fast power-on time Low noise Stable operation over full operating temperature range Reverse battery protection Solid-state reliability Factory-programmed

More information

MM74C14 Hex Schmitt Trigger

MM74C14 Hex Schmitt Trigger MM74C14 Hex Schmitt Trigger General Description The MM74C14 Hex Schmitt Trigger is a monolithic complementary MOS (CMOS) integrated circuit constructed with N- and P-channel enhancement transistors. The

More information

4-PIN PHOTOTRANSISTOR OPTOCOUPLERS

4-PIN PHOTOTRANSISTOR OPTOCOUPLERS PACKAGE HAA84 SCHEMATIC 4 COLLECTOR 4 2 3 EMITTER DESCRIPTION The HAA84 Series consists of two gallium arsenide infrared emitting diodes, connected in inverse parallel, driving a single silicon phototransistor

More information

High Speed MOSFET Drivers

High Speed MOSFET Drivers High Speed MOSFET Drivers AS / AS9 FEATURES Latch Up Protected......................... >.A Logic Input Swing..................... Negative ESD........................................ k Matched Rise and

More information

PIN Silicon Photodiode OP950 Series

PIN Silicon Photodiode OP950 Series Features: Epoxy package Linear response vs. irradiance Fast switching me Choice of wide or extra wide receiving angle Side-looker package Small package style ideal for space-limited applica ons OP950 OP954

More information

PIN Silicon Photodiode OP950 Series

PIN Silicon Photodiode OP950 Series Features: Epoxy package Linear response vs. irradiance Fast switching me Choice of wide or extra wide receiving angle Side-looker package Small package style ideal for space-limited applica ons OP955 Description:

More information

CD40106BC Hex Schmitt Trigger

CD40106BC Hex Schmitt Trigger CD40106BC Hex Schmitt Trigger General Description The CD40106BC Hex Schmitt Trigger is a monolithic complementary MOS (CMOS) integrated circuit constructed with N and P-channel enhancement transistors.

More information

Schmitt-Trigger Inverter/ CMOS Logic Level Shifter

Schmitt-Trigger Inverter/ CMOS Logic Level Shifter Schmitt-Trigger Inverter/ CMOS Logic Level Shifter with LSTTL Compatible Inputs The is a single gate CMOS Schmitt trigger inverter fabricated with silicon gate CMOS technology. It achieves high speed operation

More information

HIGH SPEED-10 MBit/s LOGIC GATE OPTOCOUPLERS

HIGH SPEED-10 MBit/s LOGIC GATE OPTOCOUPLERS DESCRIPTION The / optocouplers consist of an AlGaAS LED, optically coupled to a very high speed integrated photo-detector logic gate with a strobable output. The devices are housed in a compact small-outline

More information

NTE74HC109 Integrated Circuit TTL High Speed CMOS, Dual J K Positive Edge Triggered Flip Flop w/set & Reset

NTE74HC109 Integrated Circuit TTL High Speed CMOS, Dual J K Positive Edge Triggered Flip Flop w/set & Reset NTE74HC109 Integrated Circuit TTL High Speed CMOS, Dual J K Positive Edge Triggered Flip Flop w/set & Reset Description: The NTE74HC109 is a dual J K flip flip with set and reset in a 16 Lead plastic DIP

More information

DS Tap Silicon Delay Line FEATURES PIN ASSIGNMENT. PIN DESCRIPTION TAP 1 TAP 5 TAP Output Number +5 Volts

DS Tap Silicon Delay Line FEATURES PIN ASSIGNMENT. PIN DESCRIPTION TAP 1 TAP 5 TAP Output Number +5 Volts DS00 -Tap Silicon Delay Line FEATURES All-silicon time delay taps equally spaced Delay tolerance ± ns or ±%, whichever is greater Stable and precise over temperature and voltage range Leading and trailing

More information

MM54C14 MM74C14 Hex Schmitt Trigger

MM54C14 MM74C14 Hex Schmitt Trigger MM54C14 MM74C14 Hex Schmitt Trigger General Description The MM54C14 MM74C14 Hex Schmitt Trigger is a monolithic complementary MOS (CMOS) integrated circuit constructed with N- and P-channel enhancement

More information

74LS75 Quad Latch. DM74LS75 Quad Latch. General Description. Ordering Code: Logic Diagram. Connection Diagram. Function Table (Each Latch)

74LS75 Quad Latch. DM74LS75 Quad Latch. General Description. Ordering Code: Logic Diagram. Connection Diagram. Function Table (Each Latch) 74LS75 Quad Latch General Description These latches are ideally suited for use as temporary storage for binary information between processing units and input/output or indicator units. Information present

More information

9A HIGH-SPEED MOSFET DRIVERS

9A HIGH-SPEED MOSFET DRIVERS 9A HIGH-SPEED MOSFET DRIVERS 9A HIGH-SPEED MOSFET DRIVERS FEATURES Tough CMOS Construction High Peak Output Current.................. 9A High Continuous Output Current........ 2A Max Fast Rise and Fall

More information

N-Channel Enhancement-Mode Vertical DMOS FET

N-Channel Enhancement-Mode Vertical DMOS FET N-Channel Enhancement-Mode Vertical DMOS FET Features Free from secondary breakdown Low power drive requirement Ease of paralleling Low C ISS and fast switching speeds Excellent thermal stability Integral

More information

54AC32 Quad 2-Input OR Gate

54AC32 Quad 2-Input OR Gate 54AC32 Quad 2-Input OR Gate General Description The AC/ ACT32 contains four, 2-input OR gates. Features n I CC reduced by 50% on 54AC/74AC only Logic Symbol IEEE/IEC n Outputs source/sink 24 ma n ACT32

More information

1.0 Amp Output Current IGBT Gate Drive Photocoupler with Rail-to-Rail Output Voltage in Stretched SO6

1.0 Amp Output Current IGBT Gate Drive Photocoupler with Rail-to-Rail Output Voltage in Stretched SO6 .0 Amp Output Current IGBT Gate Drive Photocoupler with Rail-to-Rail Output Voltage in Stretched SO. Description The Photocoupler is ideally suited for driving power IGBTs and MOSFETs used in motor control

More information

MOC8111 MOC8112 MOC8113

MOC8111 MOC8112 MOC8113 PACKAGE SCHEMATIC ANODE 6 N/C 6 6 CATHODE 2 5 COLLECTOR N/C 3 4 EMITTER 6 DESCRIPTION The MOC8X series consists of a Gallium Arsenide IRED coupled with an NPN phototransistor. The base of the transistor

More information

54AC258 54ACT258 Quad 2-Input Multiplexer with TRI-STATE Outputs

54AC258 54ACT258 Quad 2-Input Multiplexer with TRI-STATE Outputs 54AC258 54ACT258 Quad 2-Input Multiplexer with TRI-STATE Outputs General Description The AC/ ACT258 is a quad 2-input multiplexer with TRI-STATE outputs. Four bits of data from two sources can be selected

More information

OP550, OP552, OP555, OP560, OP565, OP750 Series

OP550, OP552, OP555, OP560, OP565, OP750 Series OP552 Features: Wide receiving angle Four sensitivity ranges Sidelooking package Ideal for spacelimited applications Ideal for PCBoard mounting Choice of clear, opaque or bluetinted package OP550 OP5 OP750

More information

GM4275 GM4275 V2.03. Features. Description. Applications. Block Diagram WIDE INPUT RANGE 5V LOW DROPOUT REGULATOR WITH RESET FLAG

GM4275 GM4275 V2.03. Features. Description. Applications. Block Diagram WIDE INPUT RANGE 5V LOW DROPOUT REGULATOR WITH RESET FLAG Description The GM4275 series of fixed output, micro-power voltage regulators is designed for applications which require wide input voltage range up to 45V. The GM4275 is an excellent choice for the use

More information

Chopper-Stabilized, Two Wire Hall-Effect Switches

Chopper-Stabilized, Two Wire Hall-Effect Switches FEATURES AND BENEFITS High speed, 4-phase chopper stabilization Low switchpoint drift throughout temperature range Low sensitivity to thermal and mechanical stresses On-chip protection Supply transient

More information

Hall-Effect Latch / Bipolar Switch

Hall-Effect Latch / Bipolar Switch 2 - FEATURES AND BENEFITS AEC-Q1 automotive qualified Quality managed (QM), ISO 26262 compliant High-speed, 4-phase chopper stabilization Low operating voltage down to 3 V High sensitivity Stable switchpoints

More information

54AC174/54ACT174 Hex D Flip-Flop with Master Reset

54AC174/54ACT174 Hex D Flip-Flop with Master Reset 54AC174/54ACT174 Hex D Flip-Flop with Master Reset General Description The AC/ ACT174 is a high-speed hex D flip-flop. The device is used primarily as a 6-bit edge-triggered storage register. The information

More information

Hi-Reliability Optically Coupled Isolator

Hi-Reliability Optically Coupled Isolator HiReliability Optically Coupled Isolator Features: TO78 hermetically sealed package High current transfer ratio 1 k electrical isolation Base contact provided for conventional transistor biasing TX and

More information

MM74C906 Hex Open Drain N-Channel Buffers

MM74C906 Hex Open Drain N-Channel Buffers Hex Open Drain N-Channel Buffers General Description The MM74C906 buffer employs monolithic CMOS technology in achieving open drain outputs. The MM74C906 consists of six inverters driving six N-channel

More information

5-V Low Drop Fixed Voltage Regulator TLE 4275

5-V Low Drop Fixed Voltage Regulator TLE 4275 5-V Low Drop Fixed Voltage Regulator TLE 4275 Features Output voltage 5 V ± 2% Very low current consumption Power-on and undervoltage reset Reset low down to V Q = 1 V Very low-drop voltage Short-circuit-proof

More information

Features Y Wide supply voltage range 3 0V to 15V. Y High noise immunity 0 45 VDD (typ ) Y Low power TTL fan out of 2 driving 74L

Features Y Wide supply voltage range 3 0V to 15V. Y High noise immunity 0 45 VDD (typ ) Y Low power TTL fan out of 2 driving 74L CD4025 CD4023BM CD4023BC Buffered Triple 3-Input NAND Gate CD4025BM CD4025BC Buffered Triple 3-Input NOR Gate General Description These triple gates are monolithic complementary MOS (CMOS) integrated circuits

More information

SN74LS151D LOW POWER SCHOTTKY

SN74LS151D LOW POWER SCHOTTKY The TTL/MSI SN74LS5 is a high speed 8-input Digital Multiplexer. It provides, in one package, the ability to select one bit of data from up to eight sources. The LS5 can be used as a universal function

More information

NTE4501 Integrated Circuit CMOS, Dual 4 Input NAND Gate, 2 Input NOR/OR Gate, 8 Input AND/NAND Gate

NTE4501 Integrated Circuit CMOS, Dual 4 Input NAND Gate, 2 Input NOR/OR Gate, 8 Input AND/NAND Gate NTE4501 Integrated Circuit CMOS, Dual 4 Input NAND Gate, 2 Input NOR/OR Gate, 8 Input AND/NAND Gate Description: The NTE4501 is a triple gate device in a 16 Lead DIP type package constructed with MOS P

More information

MM74HC157 Quad 2-Input Multiplexer

MM74HC157 Quad 2-Input Multiplexer Quad 2-Input Multiplexer General Description The MM74HC157 high speed Quad 2-to-1 Line data selector/multiplexers utilizes advanced silicon-gate CMOS technology. It possesses the high noise immunity and

More information

DM74S373 DM74S374 3-STATE Octal D-Type Transparent Latches and Edge-Triggered Flip-Flops

DM74S373 DM74S374 3-STATE Octal D-Type Transparent Latches and Edge-Triggered Flip-Flops 3-STATE Octal D-Type Transparent Latches and Edge-Triggered Flip-Flops General Description These 8-bit registers feature totem-pole 3-STATE outputs designed specifically for driving highly-capacitive or

More information

NTE4035B Integrated Circuit CMOS, 4 Bit Parallel In/Parallel Out Shift Register

NTE4035B Integrated Circuit CMOS, 4 Bit Parallel In/Parallel Out Shift Register NTE4035B Integrated Circuit CMOS, 4 Bit Parallel In/Parallel Out Shift Register Description: The NTE4035B is a 4 bit shift register in a 16 Lead DIP type package constructed with MOS P Channel an N Channel

More information

MM74HC151 8-Channel Digital Multiplexer

MM74HC151 8-Channel Digital Multiplexer 8-Channel Digital Multiplexer General Description The MM74HC151 high speed Digital multiplexer utilizes advanced silicon-gate CMOS technology. Along with the high noise immunity and low power dissipation

More information

NTE4514B & NTE4515B Integrated Circuit CMOS, 4 Bit Latch/4 to 16 Line Decoder

NTE4514B & NTE4515B Integrated Circuit CMOS, 4 Bit Latch/4 to 16 Line Decoder NTE4514B & NTE4515B Integrated Circuit CMOS, 4 Bit Latch/4 to 16 Line Decoder Description: The NTE4514B (output active high option) and NTE4515B (output active low option) are two output options of a 4

More information

74LS244 Octal 3-STATE Buffer/Line Driver/Line Receiver

74LS244 Octal 3-STATE Buffer/Line Driver/Line Receiver 74LS244 Octal 3-STATE Buffer/Line Driver/Line Receiver General Description These buffers/line drivers are designed to improve both the performance and PC board density of 3-STATE buffers/ drivers employed

More information

74LVQ138 Low Voltage 1-of-8 Decoder/Demultiplexer

74LVQ138 Low Voltage 1-of-8 Decoder/Demultiplexer Low Voltage 1-of-8 Decoder/Demultiplexer General Description The LVQ138 is a high-speed 1-of-8 decoder/demultiplexer. This device is ideally suited for high-speed bipolar memory chip select address decoding.

More information

M63954P. HVIC Half-Bridge Driver

M63954P. HVIC Half-Bridge Driver M9P Powerex, Inc., Hillis Street, Youngwood, Pennsylvania 97- (7) 9-77 HVIC Half-Bridge Driver 9 E e c Description: M9P is a high voltage integrated circuit designed for electronic ballast, Power MOSFET

More information

GENERAL PURPOSE 6-PIN PHOTOTRANSISTOR OPTOCOUPLERS

GENERAL PURPOSE 6-PIN PHOTOTRANSISTOR OPTOCOUPLERS 4N37 HA HA2 HA3 HA4 HA5 WHITE PACKAGE (-M SUFFIX) SCHEMATIC 2 3 NC PIN. ANODE 2. CATHODE 3. NO CONNECTION 4. EMITTER 5. COLLECTOR. BASE 5 4 BLACK PACKAGE (NO -M SUFFIX) DESCRIPTION The general purpose

More information

AN8814SB. 4-channel driver IC for optical disk drive. ICs for Compact Disc/CD-ROM Player. Overview. Features. Applications.

AN8814SB. 4-channel driver IC for optical disk drive. ICs for Compact Disc/CD-ROM Player. Overview. Features. Applications. AN884SB 4-channel driver IC for optical disk drive Overview The AN884SB is a BTL system 4-channel driver and is encapsulated in the SMD package which excels in heat radiation characteristic. 8.4±0. (5.5)

More information

C2D10120A Silicon Carbide Schottky Diode Zero Recovery Rectifier

C2D10120A Silicon Carbide Schottky Diode Zero Recovery Rectifier C2D112A Silicon Carbide Schottky Diode Zero Recovery Rectifier RM RM = 12 12 V V ( =135 C) = 1 = 14.5 A A Q c = 61 nc 61 nc Q c Features 1.2kV Schottky Rectifier Zero Reverse Recovery Current Zero Forward

More information

N-Channel Enhancement-Mode Vertical DMOS FET

N-Channel Enhancement-Mode Vertical DMOS FET N-Channel Enhancement-Mode Vertical DMOS FET Features Free from secondary breakdown Low power drive requirement Ease of paralleling Low C ISS and fast switching speeds Excellent thermal stability Integral

More information

CD4071BC CD4081BC Quad 2-Input OR Buffered B Series Gate Quad 2-Input AND Buffered B Series Gate

CD4071BC CD4081BC Quad 2-Input OR Buffered B Series Gate Quad 2-Input AND Buffered B Series Gate Quad 2-Input OR Buffered B Series Gate Quad 2-Input AND Buffered B Series Gate General Description The CD4071BC and CD4081BC quad gates are monolithic complementary MOS (CMOS) integrated circuits constructed

More information

MM74HC574 3-STATE Octal D-Type Edge-Triggered Flip-Flop

MM74HC574 3-STATE Octal D-Type Edge-Triggered Flip-Flop 3-STATE Octal D-Type Edge-Triggered Flip-Flop General Description The MM74HC574 high speed octal D-type flip-flops utilize advanced silicon-gate P-well CMOS technology. They possess the high noise immunity

More information

MM74HC373 3-STATE Octal D-Type Latch

MM74HC373 3-STATE Octal D-Type Latch 3-STATE Octal D-Type Latch General Description The MM74HC373 high speed octal D-type latches utilize advanced silicon-gate CMOS technology. They possess the high noise immunity and low power consumption

More information

MM74C221 Dual Monostable Multivibrator

MM74C221 Dual Monostable Multivibrator MM74C221 Dual Monostable Multivibrator General Description The MM74C221 dual monostable multivibrator is a monolithic complementary MOS integrated circuit. Each multivibrator features a negative-traition-triggered

More information

MM74C90 MM74C93 4-Bit Decade Counter 4-Bit Binary Counter

MM74C90 MM74C93 4-Bit Decade Counter 4-Bit Binary Counter 4-Bit Decade Counter 4-Bit Binary Counter General Description The MM74C90 decade counter and the MM74C93 binary counter and complementary MOS (CMOS) integrated circuits constructed with N- and P-channel

More information

A1245. Chopper-Stabilized, Two Wire Hall-Effect Latch PACKAGES

A1245. Chopper-Stabilized, Two Wire Hall-Effect Latch PACKAGES FEATURES AND BENEFITS High speed, 4-phase chopper stabilization Low switchpoint drift throughout temperature range Low sensitivity to thermal and mechanical stresses On-chip protection Supply transient

More information

PHOTODARLINGTON OPTICAL INTERRUPTER SWITCH

PHOTODARLINGTON OPTICAL INTERRUPTER SWITCH HB HB HB3 PACKAGE DIMENSIONS 0.7 (.0) 0.57 (.6) C L 0.9 (6.35) 0.3 (6.5) D E C L 0.39 (.00) 0.3 (0.85).33 (3.38).073 (.85) 0.9 (3.3) 0.9 (3.0) 0.33 (.0) 0. (0.7) Optical C L 0.5 (3.) 0.9 (3.0).35 (8.00).95

More information

C2D10120A Silicon Carbide Schottky Diode Zero Recovery Rectifier

C2D10120A Silicon Carbide Schottky Diode Zero Recovery Rectifier Datasheet: 2D112 Rev. D 2D112A Silicon arbide Schottky Diode Zero Recovery Rectifier RM = 12 V = 1 A Q c = 61 n Features 12-Volt Schottky Rectifier Zero Reverse Recovery urrent Zero Forward Recovery Voltage

More information

N-Channel Enhancement-Mode Vertical DMOS FETs

N-Channel Enhancement-Mode Vertical DMOS FETs VN16 N-Channel Enhancement-Mode Vertical DMOS FETs Features Free from secondary breakdown Low power drive requirement Ease of paralleling Low C ISS and fast switching speeds High input impedance and high

More information

INTEGRATED CIRCUITS. For a complete data sheet, please also download:

INTEGRATED CIRCUITS. For a complete data sheet, please also download: INTEGRATED CIRCUITS DATA SHEET For a complete data sheet, please also download: The IC06 74HC/HCT/HCU/HCMOS Logic Family Specifications The IC06 74HC/HCT/HCU/HCMOS Logic Package Information The IC06 74HC/HCT/HCU/HCMOS

More information

UNISONIC TECHNOLOGIES CO., LTD U74HC14

UNISONIC TECHNOLOGIES CO., LTD U74HC14 UNISONIC TECHNOLOGIES CO., LTD U74HC14 HIGH-SPEED CMOS LOGIC HEX INVERTING SCHMITT TRIGGER DESCRIPTION The UTC U74HC14 each contain six inverting Schmitt triggers in one package. Each of them perform the

More information

AVAILABLE OPTIONS PACKAGED DEVICES CHIP CARRIER (FK) CERAMIC DIP (JG) TL7702ACD TL7715ACD TL7702ACP TL7715ACP TL7702ACY TL7715ACY

AVAILABLE OPTIONS PACKAGED DEVICES CHIP CARRIER (FK) CERAMIC DIP (JG) TL7702ACD TL7715ACD TL7702ACP TL7715ACP TL7702ACY TL7715ACY Power-On Reset Generator Automatic Reset Generation After Voltage Drop Wide Supply Voltage Range Precision Voltage Sensor Temperature-Compensated Voltage Reference True and Complement Reset Outputs Externally

More information

TA7262P,TA7262P(LB),TA7262F

TA7262P,TA7262P(LB),TA7262F TOSHIBA BIPOLAR LINEAR INTEGRATED CIRCUIT SILICON MONOLITHIC TA7262P,TA7262P(LB),TA7262F DC MOTOR DRIVER (3 PHASE Bi DIRECTIONAL) The TA7262P / P (LB) / F are 3 Phase Bi Directional supply voltage control

More information

Standard Products UT54ACS74/UT54ACTS74 Dual D Flip-Flops with Clear & Preset. Datasheet November 2010

Standard Products UT54ACS74/UT54ACTS74 Dual D Flip-Flops with Clear & Preset. Datasheet November 2010 Standard Products UT54ACS74/UT54ACTS74 Dual D Flip-Flops with Clear & Preset Datasheet November 2010 www.aeroflex.com/logic FEATURES 1.2μ CMOS - Latchup immune High speed Low power consumption Single 5

More information

CD4049UBC CD4050BC Hex Inverting Buffer Hex Non-Inverting Buffer

CD4049UBC CD4050BC Hex Inverting Buffer Hex Non-Inverting Buffer CD4049UBC CD4050BC Hex Inverting Buffer Hex Non-Inverting Buffer General Description The CD4049UBC and CD4050BC hex buffers are monolithic complementary MOS (CMOS) integrated circuits constructed with

More information

GENERAL PURPOSE 6-PIN PHOTOTRANSISTOR OPTOCOUPLERS

GENERAL PURPOSE 6-PIN PHOTOTRANSISTOR OPTOCOUPLERS TIL TIL-M TIL7-M MOC800-M WHITE PACKAGE (-M SUFFIX) SCHEMATIC 2 3 NC 5 4 PIN. ANODE 2. CATHODE 3. NO CONNECTION 4. EMITTER 5. COLLECTOR. BASE BLACK PACKAGE (NO -M SUFFIX) DESCRIPTION The MOC800, TIL and

More information

MM74HC154 4-to-16 Line Decoder

MM74HC154 4-to-16 Line Decoder 4-to-16 Line Decoder General Description The MM74HC154 decoder utilizes advanced silicon-gate CMOS technology, and is well suited to memory address decoding or data routing applications. It possesses high

More information

CD4028BC BCD-to-Decimal Decoder

CD4028BC BCD-to-Decimal Decoder BCD-to-Decimal Decoder General Description The is a BCD-to-decimal or binary-to-octal decoder consisting of 4 inputs, decoding logic gates, and 10 output buffers. A BCD code applied to the 4 inputs, A,

More information

MM74C00 MM74C02 MM74C04 Quad 2-Input NAND Gate Quad 2-Input NOR Gate Hex Inverter

MM74C00 MM74C02 MM74C04 Quad 2-Input NAND Gate Quad 2-Input NOR Gate Hex Inverter MM74C00 MM74C02 MM74C04 Quad 2-Input NAND Gate Quad 2-Input NOR Gate Hex Inverter General Description The MM74C00, MM74C02, and MM74C04 logic gates employ complementary MOS (CMOS) to achieve wide power

More information

High-Temperature Precision Hall-Effect Switch

High-Temperature Precision Hall-Effect Switch - FEATURES AND BENEFITS Unipolar switchpoints ASIL A functional safety compliance Automotive-grade ruggedness and fault tolerance Extended AEC-Q qualification Reverse-battery and 4 V load dump protection

More information

DS1225Y. 64K Nonvolatile SRAM FEATURES PIN ASSIGNMENT

DS1225Y. 64K Nonvolatile SRAM FEATURES PIN ASSIGNMENT DS1225Y 64K Nonvolatile SRAM FEATURES years minimum data retention in the absence of external power PIN ASSIGNMENT NC 1 28 VCC Data is automatically protected during power loss Directly replaces 8K x 8

More information

MM74C85 4-Bit Magnitude Comparator

MM74C85 4-Bit Magnitude Comparator 4-Bit Magnitude Comparator General Description The MM74C85 is a four-bit magnitude comparator which will perform comparison of straight binary or BCD codes. The circuit consists of eight comparing inputs

More information

NE556 SA556 - SE556 GENERAL PURPOSE DUAL BIPOLAR TIMERS. LOW TURN OFF TIME MAXIMUM OPERATING FREQUENCY GREATER THAN 500kHz

NE556 SA556 - SE556 GENERAL PURPOSE DUAL BIPOLAR TIMERS. LOW TURN OFF TIME MAXIMUM OPERATING FREQUENCY GREATER THAN 500kHz SA - SE GENERAL PURPOSE DUAL BIPOLAR TIMERS. LOW TURN OFF TIME MAXIMUM OPERATING FREQUENCY GREATER THAN 00kHz. TIMING FROM MICROSECONDS TO HOURS. OPERATES IN BOTH ASTABLE AND MONOSTABLE MODES HIGH OUTPUT

More information

Standard Products UT54ACS153/UT54ACTS153 Dual 4 to 1 Multiplexers. Datasheet November 2010

Standard Products UT54ACS153/UT54ACTS153 Dual 4 to 1 Multiplexers. Datasheet November 2010 Standard Products UT54ACS153/UT54ACTS153 Dual 4 to 1 Multiplexers Datasheet November 2010 www.aeroflex.com/logic FEATURES 1.2μ CMOS - Latchup immune High speed Low power consumption Single 5 volt supply

More information

PHOTOTRANSISTOR OPTOCOUPLERS

PHOTOTRANSISTOR OPTOCOUPLERS MCT MCTE MCT0 MCT7 MCT00 MCT0 MCT0 WHITE PACKAGE (-M SUFFIX) BLACK PACKAGE (NO -M SUFFIX) DESCRIPTION The MCTXXX series optoisolators consist of a gallium arsenide infrared emitting diode driving a silicon

More information

SGM7SZ00 Small Logic Two-Input NAND Gate

SGM7SZ00 Small Logic Two-Input NAND Gate GENERAL DESCRIPTION The SGM7SZ00 is a single two-input NAND gate from SGMICRO s Small Logic series. The device is fabricated with advanced CMOS technology to achieve ultra-high speed with high output drive

More information

Features MIC4468 V S GND. Micrel, Inc Fortune Drive San Jose, CA USA tel + 1 (408) fax + 1 (408)

Features MIC4468 V S GND. Micrel, Inc Fortune Drive San Jose, CA USA tel + 1 (408) fax + 1 (408) MIC// Quad.-Peak Low-Side MOSFET Driver Bipolar/CMOS/DMOS General Description The MIC// family of -output CMOS buffer/drivers is an expansion from the earlier single- and dual-output drivers, to which

More information

Standard Products UT54ACS109/UT54ACTS109 Dual J-K Flip-Flops. Datasheet November 2010

Standard Products UT54ACS109/UT54ACTS109 Dual J-K Flip-Flops. Datasheet November 2010 Standard Products UT54ACS109/UT54ACTS109 Dual J-K Flip-Flops Datasheet November 2010 www.aeroflex.com/logic FEATURES 1.2μ CMOS - Latchup immune High speed Low power consumption Single 5 volt supply Available

More information

MM74HC00 Quad 2-Input NAND Gate

MM74HC00 Quad 2-Input NAND Gate MM74HC00 Quad 2-Input NAND Gate General Description The MM74HC00 NAND gates utilize advanced silicon-gate CMOS technology to achieve operating speeds similar to LS-TTL gates with the low power consumption

More information

DS1691A/DS3691 (RS-422/RS-423) Line Drivers with TRI-STATE Outputs

DS1691A/DS3691 (RS-422/RS-423) Line Drivers with TRI-STATE Outputs DS1691A/DS3691 (RS-422/RS-423) Line Drivers with TRI-STATE Outputs General Description The DS1691A/DS3691 are low power Schottky TTL line drivers designed to meet the requirements of EIA standards RS-422

More information

MM74C175 Quad D-Type Flip-Flop

MM74C175 Quad D-Type Flip-Flop Quad D-Type Flip-Flop General Description The MM74C175 coists of four positive-edge triggered D- type flip-flops implemented with monolithic CMOS technology. Both are true and complemented outputs from

More information

C2D05120A Silicon Carbide Schottky Diode Zero Recovery Rectifier

C2D05120A Silicon Carbide Schottky Diode Zero Recovery Rectifier C2D512A Silicon Carbide Schottky Diode Zero Recovery Rectifier RM = 12 V ( =135 C) = 8.5 A Q c = 28 nc Features 1.2kV Schottky Rectifier Zero Reverse Recovery Current Zero Forward Recovery Voltage High-Frequency

More information