MT4103 Series Uni-polar, Hall-Effect
|
|
- Wesley Randell Chambers
- 6 years ago
- Views:
Transcription
1 Unipolar, HallEffect Magnetic Position ensors Features and Benefits Bipolar Technology Magnetic Type: Unipolar Wide Operating Voltage Range: upply Voltage 3.8~30V pecified Operating Temperature Range: From 40 ~150 Magnetic ensitivity Bop=150Gauss, Brp=100Gauss (typical) Lead Free Package Flat TO92, OT23, OT89B Open Collector Output RoH Compliant 2011/65/EU Applications Automotive, Home appliances, Industrial peed Detection Position Detection Magnetic Encoder olidtate witch Proximity witch Family Members Part number MT4103A MT4103AT MT4103AT MT4103BT MT4103ET Description Flat TO92 package, bulk packaging (1000pcs/bag) Flat TO92 package, Radial lead, bulk packaging (1000pcs/bag) OT23 package, tape and reel packaging (3000pcs/bag) OT89B package, tape and reel packaging ( 1000pcs/bag) OT23(thin outline) package, tape and reel packaging (3000pcs/bag) General Description The MT4103 family, produced with Bipolar technology, The Hall IC internally includes an onchip Hall voltage generator, a voltage regulator for operation with supply voltages of 3.8 to 30V, reverse protection diode, temperature compensation circuitry, smallsignal amplifier, chmitt trigger and an opencollector output. They are designed to respond to a single pole: North (AT) or outh (A, BT and ET). While the magnetic flux density(b) is larger than operate point (Bop), the output will be turned on (Low), while the magnetic flux density(b) is lower than release point (Brp), then turn off (High). The MT4103 family provides a variety of packages to customers: OT23/OT89B for surface mount and TO92 flat for throughhole mount. All packages are RoH compliant. 01/10
2 Unipolar, HallEffect Magnetic Position ensors Vs Regulator VOUT Hall Element Amp GND Functional Block Diagram Function Description Definition of Magnetic Parameters BOP: BRP: Operating Point Magnetic flux density applied on the branded side of the package which turns the output driver ON (V OUT = Low) Release Point Magnetic flux density applied on the branded side of the package which turns the output driver OFF (V OUT = high) BHYT: Hysteresis Window BOPBRP Definition of witching Function Output (V) Output (V) North Pole B OP B RP 0 0 B RP B OP outh Pole witching Behavior of AT witching Behavior of A, BT and ET 02/10
3 Unipolar, HallEffect Magnetic Position ensors N N Motion OUT=Low OUT=High OUT=Low OUT=High witching Point of AT witching Point of A Motion OUT=Low witching Point of BT OUT=High OUT=Low witching Point of ET OUT=High Note: Direction of magnetic flux Pin Description MT4103AT Name Number Description GND 3 Ground Output 2 OpenCollector output MT4103A (MT4103AT) Name Number Description Vs 1 Power Vs 1 Power GND 2 Ground Output 3 OpenCollector output MT4103ET Name Number Description Vs 1 Power GND 3 Ground Output 2 OpenCollector output MT4103BT Name Number Description Vs 1 Power GND 2 Ground Output 3 OpenCollector output 03/10
4 Unipolar, HallEffect Magnetic Position ensors Electrical and Magnetic Characteristics Absolute Maximum Ratings Absolute maximum ratings are limiting values to be applied individually, and beyond which the serviceability of the circuit may be impaired. Functional operability is not necessarily implied. Exposure to absolute maximum rating conditions for an extended period of time may affect device reliability. Absolute maximum ratings: all voltages listed are referenced to GND. ymbol Parameters Min Max Units V V RCC V OUT upply Voltage 40 V Reverse Battery Voltage 40 V Output Voltage 40 V I OUT Continuous output current 50 ma T A Operating Ambient Temperature T s torage temperature T J Junction temperature 165 B Magnetic flux No Limit Gauss MT4103 eries pecifications at T A = 40 to 150, Vs = 3.8V to 30V (unless otherwise specified) ymbol Parameter Test Condition Min V upply Voltage Operating V I upply Current B<B RP V ON Output aturation Voltage I OUT=20mA, B>B OP I OFF Output Leakage Current B<B RP, V OUT =30V 10 ua T R Output Rise Time R L=1KOhm, C L =20pF T F Output Fall Time R L=1KOhm, C L =20pF F W R TH B OP B RP Maximum witching Frequency 100 KHz OT23 Package Thermal Resistance 301 TO92 Package Thermal Resistance 230 OT89B Package Thermal Resistance Magnetic Operating Point Magnetic Release Point B HYT Hysteresis Window B OPB RP Typ Max Units 4 10 ma V u u /W /W /W 230 Gauss 150 Gauss Gauss 04/10
5 Unipolar, HallEffect Magnetic Position ensors Typical Application Circuit Note: R L recommend 1Kohm to 10Kohm MT4103 Typical Output Waveform (The TO92 package as an example ) B B OP Magnetic Field B RP T V High Digital Output Low T 05/10
6 Unipolar, HallEffect Magnetic Position ensors PACKAGE DEIGNATOR (MT4103A) TO92 Flat ymbol Dimensions in Millimeters Dimensions in Inches Min Max Min Max A A b b c D D E e TYP TYP. e L θ 45 TYP. 45 TYP. 06/10
7 Unipolar, HallEffect Magnetic Position ensors PACKAGE DEIGNATOR (MT4103AT) Flat TO92 Radial lead ymbol Dimensions in Millimeters Dimensions in Inches Min Max Min Max A A b b c D D E e TYP TYP. e TYP TYP. L REF REF. L REF REF. θ 45 TYP. 45 TYP. 07/10
8 Unipolar, HallEffect Magnetic Position ensors PACKAGE DEIGNATOR (MT4103AT) OT233L ymbol Dimensions in Millimeters Dimensions in Inches Min Max Min Max A A A b c D E E e TYP TYP. e L θ /10
9 Unipolar, HallEffect Magnetic Position ensors PACKAGE DEIGNATOR (MT4103BT) OT89B ymbol Dimensions in Millimeters Dimensions in Inches Min Max Min Max A A b b D c REF REF. E HE e TYP TYP. L /10
10 Unipolar, HallEffect Magnetic Position ensors PACKAGE DEIGNATOR (MT4103ET) OT23 ymbol Dimensions in Millimeters Dimensions in Inches Min Max Min Max A A A b c D E E e TYP TYP. e L REF REF. L θ /10
MT1101 Series CMOS, Uni-polar, Hall-Effect
CMO, Unipolar, HallEffect Features and Benefits CMO Technology Magnetic Type: Unipolar Wide Operating Voltage Range: upply Voltage 2.8~24V pecified Operating Temperature Range: From 40 ~125 High Magnetic
More informationMT4106 Series Uni-polar, Hall-Effect
Uni-polar, Hall-Effect Magnetic Position ensors Features and Benefits Bipolar Technology Magnetic Type: Uni-polar Wide Operating Voltage Range: upply Voltage 3.8~30V pecified Operating Temperature Range:
More informationMT3451 Series BiCMOS, Latch, Hall-Effect Magnetic Position Sensors
Features and Benefits BiCMOS Technology Magnetic Type: Latch Wide Operating Voltage Range: Supply Voltage 2.8~24V Specified Operating Temperature Range: From -40 ~ 150 High Magnetic Sensitivity B OP =20Gauss,
More informationATS177. General Description. Features. Applications. Ordering Information SINGLE OUTPUT HALL EFFECT LATCH ATS177 - P L - X - X
Features General Description 3.5V to 20V DC operation voltage Temperature compensation Wide operating voltage range Open-Collector pre-driver 25mA maximum sinking output current Reverse polarity protection
More informationUNISONIC TECHNOLOGIES CO., LTD
UNISONIC TECHNOLOGIES CO., LTD COMPLEMENTARY OUTPUTS HALL EFFECT LATCH IC DESCRIPTION The UTC UH276 is a Latch-Type Hall Effect sensor with built-in complementary output drivers. It s designed with internal
More informationUNISONIC TECHNOLOGIES CO., LTD
UNISONIC TECHNOLOGIES CO., LTD BIPOLAR LATCH TYPE HALL EFFECT FOR HIGH-TEMPERATURE OPERATION DESCRIPTION 1 SIP-3 The UTC SK1816 is a semiconductor integrated circuit utilizing the Hall effect. It designed
More informationUNISONIC TECHNOLOGIES CO., LTD
UNISONIC TECHNOLOGIES CO., LTD COMPLEMENTARY OUTPUT HALL EFFECT LATCH DESCRIPTION The UTC H654 is integrated Hall sensors with complementary output drivers designed for electronic commutation of brushless
More informationMLX90224 Dual Hall Effect Switch
Dual Hall Effect witch Features and Benefits Chopper tabilized Amplifier tage CMO for Optimum tability, Quality and Cost Dual Output 5V to 24V Operation Phase/Direction Detection (option code B) Applications
More informationDiscontinued Product
Discontinued Product This device is no longer in production. The device should not be purchased for new design applications. Samples are no longer available. Date of status change: November 1, 21 Recommended
More informationUNISONIC TECHNOLOGIES CO., LTD
UNISONIC TECHNOLOGIES CO., LTD COMPLEMENTARY OUTPUTS HALL EFFECT LATCH IC DESCRIPTION The UTC UH277 is a Latch-Type Hall Effect sensor with built-in complementary output drivers. It s designed with internal
More informationAPS12205, APS12215, and APS12235 High-Temperature Hall-Effect Latches for Low Voltage Applications
FEATURES AND BENEFITS Optimized for applications with regulated power rails Operation from to. V AEC-Q100 automotive qualified Operation up to 17 C junction temperature Dynamic offset cancellation Resistant
More informationATS276 X - P X - B - X. Lead Free L : Lead Free G : Green
Features General Description On-Chip Hall Sensor with Two Different Sensitivity and Hysteresis Settings for ATS276 3.5V to 2V Operating Voltage 4mA (avg.) Output Sink Current Built-in Protecting Diode
More informationUNISONIC TECHNOLOGIES CO., LTD
UNISONIC TECHNOLOGIES CO., LTD BIPOLAR LATCH TYPE HALL EFFECT FOR HIGH-TEMPERATURE OPERATION DESCRIPTION 1 SIP-3 The UTC SK1816 is a semiconductor integrated circuit utilizing the Hall effect. It designed
More informationUNISONIC TECHNOLOGIES CO., LTD
UNISONIC TECHNOLOGIES CO., LTD BIPOLAR LATCH TYPE HALL EFFECT FOR HIGH-TEMPERATURE OPERATION DESCRIPTION The UTC SK1816 is a semiconductor integrated circuit utilizing the Hall effect. It designed to operate
More informationGeneral Description DTS27X X -X X X -X. Lead. 27X coil1. R1 = R2 = 470Ω C1 = C2 = 2.2 μ F The R, C value need to be fine tuned base on coils design.
Features - On-chip Hall sensor with two different sensitivity and hysteresis settings for - 3.5V to 18V operating voltage - 35mA (avg) output sink current - Built-in protecting diode only for chip reverse
More informationChopper-Stabilized, Two Wire Hall-Effect Switches
FEATURES AND BENEFITS High speed, 4-phase chopper stabilization Low switchpoint drift throughout temperature range Low sensitivity to thermal and mechanical stresses On-chip protection Supply transient
More informationPrecision Hall-Effect Switch for Consumer and Industrial Applications
FEATURES AND BENEFITS Unipolar switchpoints Superior ruggedness and fault tolerance Reverse-polarity and transient protection Operation from 40 C to 175 C junction temperature Output short-circuit and
More informationS-57K1 A Series FOR AUTOMOTIVE 125 C OPERATION HIGH-WITHSTAND VOLTAGE HIGH-SPEED BIPOLAR HALL EFFECT LATCH IC. Features. Applications.
www.ablic.com FOR AUTOMOTIVE 125 C OPERATION HIGH-WITHSTAND VOLTAGE HIGH-SPEED BIPOLAR HALL EFFECT LATCH IC ABLIC Inc., 2013-2019 This IC, developed by CMOS technology, is a high-accuracy Hall effect latch
More informationHigh-Temperature Precision Hall-Effect Switch
- FEATURES AND BENEFITS Unipolar switchpoints ASIL A functional safety compliance Automotive-grade ruggedness and fault tolerance Extended AEC-Q qualification Reverse-battery and 4 V load dump protection
More informationHIGH VOLTAGE HALL EFFECT LATCH General Description. Features. Applications
General Description The is an integrated Hall sensor with output driver designed for electronic commutation of brushless DC motor applications. The device includes an onchip Hall sensor for magnetic sensing,
More informationHigh Reliability Hallogic Hall- Effect Sensors OMH090, OMH3019, OMH3020, OMH3040, OMH3075, OMH3131 (B, S versions)
High Reliability Hallogic Hall Features: Designed for noncontact switching operations Operates over a broad range of supply voltages Excellent temperature stability operates in harsh environments Suitable
More informationHall-Effect Latch / Bipolar Switch
2 - FEATURES AND BENEFITS AEC-Q1 automotive qualified Quality managed (QM), ISO 26262 compliant High-speed, 4-phase chopper stabilization Low operating voltage down to 3 V High sensitivity Stable switchpoints
More informationBlock Diagram 1 REG. VCC 2 Hall Plate Amp B 3 GND 4 Pin Assignment 277 (276) Front View 1 : VCC 2 : 3 : B :GND Name P/I/O Pin # Desc
E-MAIL: Features - On-chip Hall sensor with two different sensitivity and hysteresis settings for - 3.5V to 2V operating voltage - 4mA (avg) output sink current - Build-in protecting diode only for chip
More informationAPS13290 and APS13291 Precision Hall-Effect Latches for Consumer and Industrial Applications
APS329 and FEATURES AND BENEFITS Symmetrical latch switchpoints Superior ruggedness and fault tolerance Reverse-polarity and transient protection Operation from 4 C to 7 C junction temperature Output short-circuit
More informationS-57P1 S Series FOR AUTOMOTIVE 150 C OPERATION HIGH-WITHSTAND VOLTAGE HIGH-SPEED BIPOLAR HALL EFFECT LATCH IC. Features. Applications.
www.ablicinc.com FOR AUTOMOTIVE 150 C OPERATION HIGH-WITHSTAND VOLTAGE HIGH-SPEED BIPOLAR HALL EFFECT LATCH IC ABLIC Inc., 2015-2017 This IC, developed by CMOS technology, is a high-accuracy Hall effect
More informationSGM7227 High Speed USB 2.0 (480Mbps) DPDT Analog Switch
GENERAL DECRIPTION The GM7227 is a high-speed, low-power double-pole/ double-throw (DPDT) analog switch that operates from a single 1.8V to 4.3V power supply. GM7227 is designed for the switching of high-speed
More informationS-5743 A Series 125 C OPERATION HIGH-WITHSTAND VOLTAGE HIGH-SPEED BIPOLAR HALL EFFECT LATCH IC. Features. Applications. Package.
www.ablicinc.com S-5743 A Series 125 C OPERATION HIGH-WITHSTAND VOLTAGE HIGH-SPEED BIPOLAR HALL EFFECT LATCH IC ABLIC Inc., 2015-2017 Rev.1.1_02 This IC, developed by CMOS technology, is a high-accuracy
More informationChopper-Stabilized Precision Hall-Effect Latches
Features and Benefits AEC-Q1 automotive qualified Symmetrical latch switchpoints Resistant to physical stress Superior temperature stability Output short-circuit protection Operation from unregulated supply
More informationDetection of S pole Detection of N pole Active "L" Active "H" Nch open-drain output Nch driver built-in pull-up resistor. f C = 250 khz typ.
www.ablic.com www.ablicinc.com S-5732 B Series 125 C OPERATION HIGH-WITHSTAND VOLTAGE HIGH-SPEED UNIPOLAR DETECTION TYPE HALL EFFECT SWITCH IC ABLIC Inc., 2016-2017 Rev.2.1_02 This IC, developed by CMOS
More informationA1245. Chopper-Stabilized, Two Wire Hall-Effect Latch PACKAGES
FEATURES AND BENEFITS High speed, 4-phase chopper stabilization Low switchpoint drift throughout temperature range Low sensitivity to thermal and mechanical stresses On-chip protection Supply transient
More informationContinuous-Time Switch Family
Features and enefits Continuous-time operation Fast power-on time Low noise Stable operation over full operating temperature range Reverse battery protection Solid-state reliability Factory-programmed
More informationRP mA, Ultra-Low Noise, Ultra-Fast CMOS LDO Regulator. General Description. Features. Applications. Ordering Information. Marking Information
RP122 3mA, Ultra-Low Noise, Ultra-Fast CMOS LDO Regulator General Description The RP122 is designed for portable RF and wireless applications with demanding performance and space requirements. The RP122
More informationContinuous-Time Switch Family
Features and Benefits Continuous-time operation Fast power-on time Low noise Stable operation over full operating temperature range Reverse battery protection Solid-state reliability Factory-programmed
More informationA1244 Chopper-Stabilized, Two Wire Hall-Effect Latch
Features and Benefits High speed, 4-phase chopper stabilization Low switchpoint drift throughout temperature range Low sensitivity to thermal and mechanical stresses On-chip protection Supply transient
More informationHallogic Hall-effect Sensors OH090U, OH180U, OH360U OHN3000 Series, OHS3000 Series OHN3100 Series, OHS3100 Series
Hallogic Halleffect Sensors Features: Designed for noncontact switching operations Operates over broad range of supply voltages (4.5 V to 24 V) Operates with excellent temperature stability in harsh environments
More informationHAL501...HAL506, HAL508 Hall Effect Sensor ICs MICRONAS INTERMETALL MICRONAS. Edition May 5, DS
MICRONAS INTERMETALL HAL1...HAL, HAL Hall Effect Sensor ICs Edition May, 1997 1--1DS MICRONAS HAL1...HAL HAL Hall Effect Sensor IC in CMOS technology Common Features: switching offset compensation at khz
More informationAOZ6115 High Performance, Low R ON, SPST Analog Switch
OZ6115 High Performance, Low R ON, PT nalog witch General Description The OZ6115 is a high performance single-pole single-throw (PT), low power, TTL-compatible bus switch. The OZ6115 can handle analog
More informationPT5108. High-PSRR 500mA LDO GENERAL DESCRIPTION FEATURES APPLICATIONS TYPICAL APPLICATIONS. Ripple Rejection vs Frequency. Ripple Rejection (db)
GENERAL DESCRIPTION The PT5108 is a low-dropout voltage regulator designed for portable applications that require both low noise performance and board space. Its PSRR at 1kHz is better than 70dB. The PT5108
More informationHallogic Hall-Effect Sensors OH090U, OH180U, OH360U OHN3000 series, OHS3000 series OHN3100 series, OHS3100 series
Hallogic HallEffect Sensors OH9U, OH18U, OH36U OHN3 series, OHS3 series OHN3 series, OHS3 series Features: Designed for noncontact switching operations Operates over broad range of supply voltages (4.5
More informationA1126. Chopper-Stabilized Omnipolar Hall-Effect Switch DESCRIPTION FEATURES AND BENEFITS. PACKAGES: Not to scale. Functional Block Diagram
FEATURES AND BENEFITS AEC-Q1 automotive qualified Omnipolar operation Low switchpoint drift Superior temperature stability Insensitive to physical stress Reverse-battery protection Robust EMC capability
More informationSGM802 Low-Power, SC70/SOT µp Reset Circuit with Capacitor-Adjustable Reset Timeout Delay
Low-Power, SC70/SOT µp Reset Circuit with GENERAL DESCRIPTION The low-power micro-processor supervisor circuit monitors system voltages from 1.6V to 5V. This device performs a single function: it asserts
More informationBipolar Detection Hall ICs
Hall IC Series / Hall IC(Latch type) Bipolar Detection Hall ICs BU52001GUL, BU52011HFV, BU52021HFV, BU52015GUL, BU52025G, BU52051NVX, BD711G Description The bipolar Hall ICs are magnetic switches that
More informationt CYCLE = ms typ. (I DD = 1.4 μa typ.) t CYCLE = 50.5 ms typ. (I DD = 2.0 μa typ.) t CYCLE = 5.7 ms typ. (I DD = 12.0 μa typ.
www.sii-ic.com S-5718 Series LOW VOLTAGE OPERATION OMNIPOLAR / UNIPOLAR DETECTION TYPE HALL EFFECT SWITCH IC WITH SWITCHABLE DETECTION POLE FUNCTION SII Semiconductor Corporation, 2017 Rev.1.1_00 This
More informationSGM48753 CMOS Analog Switch
GENERAL DESCRIPTION The is a CMOS analog IC configured as three single-pole/double-throw (SPDT) switches. This CMOS device can operate from 2.5V to 5.5V single supplies. Each switch can handle rail-to-rail
More informationGENERAL DESCRIPTION The PT5128 is a dual channel low-dropout voltage regulator designed for portable and wireless applications that require high PSRR, low quiescent current and excellent line and load
More informationAOZ Ω Low-Voltage Dual-DPDT Analog Switch
0.3Ω Low-Voltage Dual-DPDT nalog witch General Description The OZ6274 is a dual Double-Pole, Double-Throw (DPDT) analog switch that is designed to operate from a single 1.65V to 4.3V supply. The OZ6274
More informationAlfa-MOS Technology. AF V / 50mA Linear LED Driver
General Description The is a linear LED driver. The application of high bright LED is widely used for general illumination. The maximum output current is 50mA. Typical variations is % in V IN = 6 ~ 500V
More information5V/400mA Low Drop Voltage ILE4275 TECHNICAL DATA
TECHNICAL DATA 5V/400mA Low Drop Voltage ILE4275 is integrated circuits of voltage regulator 5V/400 ma with low-drop voltage. The IC of voltage regulator 5V/400 ma are purposed to supply DC voltage 5V
More informationGM4275 GM4275 V2.03. Features. Description. Applications. Block Diagram WIDE INPUT RANGE 5V LOW DROPOUT REGULATOR WITH RESET FLAG
Description The GM4275 series of fixed output, micro-power voltage regulators is designed for applications which require wide input voltage range up to 45V. The GM4275 is an excellent choice for the use
More informationOPL800, OPL800-OC, OPL801, OPL801-OC, OPL810, OPL810-OC, OPL811, OPL811-OC, OPL812-OC, OPL813-OC, OPL820, OPL820-OC, OPL821-OC
OPL800, OPL800OC, OPL801, OPL801OC, OPL810, OPL810OC, OPL811, OPL811OC, OPL812OC, OPL813OC,, OC, OPL821OC Features: Four output options available High noise immunity Direct TTL/LSTTL interface TO18 hermetically
More informationSGM800 Low-Power, SOT µp Reset Circuit with Capacitor-Adjustable Reset Timeout Delay
GENERAL DESCRIPTION The low-power micro-processor supervisor circuit monitors system voltages from 1.6V to 5V. This device performs a single function: it asserts a reset signal whenever the V CC supply
More informationSGM48000/1/2 High Speed, Dual Power MOSFET Drivers
SGM000// GENERAL DESCRIPTION The SGM000// ICs are matched dual-drivers. Unique circuit design provides very high speed drivers capable of delivering peak currents of A into highly capacitive loads. Improved
More informationAME, Inc. 5A Low Dropout AME1084 Positive Voltage Regulator General Description Functional Block Diagram Input Current Limiting
General Description Functional Block Diagram The is a 5A low-dropout positive voltage regulator. It is available in fixed and adjustable output voltage versions. Overcurrent and thermal protection are
More informationNTE74HC109 Integrated Circuit TTL High Speed CMOS, Dual J K Positive Edge Triggered Flip Flop w/set & Reset
NTE74HC109 Integrated Circuit TTL High Speed CMOS, Dual J K Positive Edge Triggered Flip Flop w/set & Reset Description: The NTE74HC109 is a dual J K flip flip with set and reset in a 16 Lead plastic DIP
More informationAME. High PSRR, Low Noise, 300mA CMOS Regulator AME8853. n General Description. n Typical Application. n Features. n Functional Block Diagram
8853 n General Description n Typical Application The 8853 family of positive, CMOS linear regulators provide low dropout voltage(220mv@300ma), low quiescent current, and low noise CMOS LDO. These rugged
More informationSchmitt-Trigger Inverter/ CMOS Logic Level Shifter
Schmitt-Trigger Inverter/ CMOS Logic Level Shifter with LSTTL Compatible Inputs The is a single gate CMOS Schmitt trigger inverter fabricated with silicon gate CMOS technology. It achieves high speed operation
More information5A Low Dropout Linear Regulator
Solved by SP084 TM 5A Low Dropout Linear Regulator TO-- features INPUT Low Dropout oltage:. Typically at 5A Current Limiting and Thermal Protection Output Current: 5A Current Limit:.5A Operating Junction
More informationAME. High PSRR, Low Noise, 600mA CMOS Regulator AME8855. General Description. Typical Application. Features. Functional Block Diagram.
8855 General Description Typical Application The 8855 family of positive, CMOS linear regulators provide low dropout voltage(42mv@6ma), low quiescent current, and low noise CMOS LDO. These rugged devices
More informationAOZ6135 High Performance, Low R ON, 1Ω SPDT Analog Switch
OZ6135 High Performance, Low R ON, 1Ω PDT nalog witch General Description The OZ6135 is a high performance single-pole double-throw (PDT), low power, TTL-compatible bus switch. The OZ6135 can handle analog
More informationIsolated Current Sensor with Common Mode Field Rejection
Fully Integrated Current Sensor IC Isolated Current Sensor with Common Mode Field Rejection Description The SENKO SC820 provides economical and precise solutions for AC or DC current sensing in industrial,
More informationIsolated Current Sensor with Common Mode Field Rejection
Fully Integrated Current Sensor IC Isolated Current Sensor with Common Mode Field Rejection Description The Senko Micro s SC810 provides economical and precise solutions for AC or DC current sensing in
More informationAME. µprocessor Supervisory AME8501. n General Description. n Application. n Typical Application. n Features. n Functional Block Diagram
n General Description The family allows the user to customize the CPU reset function without any external components. The user has a large choice of reset voltage thresholds, reset time intervals, and
More informationAOZ Ω Low-Voltage Dual SPDT Analog Switch. General Description. Features. Applications AOZ6236
0.35 Ω Low-Voltage Dual PDT nalog witch General Description The OZ6236 is a 0.35 Ω low-voltage Dual ingle Pole Double Throw (PDT) analog switch. The OZ6236 operates from a single 1.65 V to 4.3 V supply.
More informationAME. High PSRR, Low Noise, 600mA CMOS Regulator AME8855. n General Description. n Typical Application. n Features. n Functional Block Diagram
8855 n General Description n Typical Application The 8855 family of positive, CMOS linear regulators provide low dropout voltage(42mv@6ma), low quiescent current, and low noise CMOS LDO. These rugged devices
More information74F109 Dual JK Positive Edge-Triggered Flip-Flop
Dual JK Positive Edge-Triggered Flip-Flop General Description The F109 consists of two high-speed, completely independent transition clocked JK flip-flops. The clocking operation is independent of rise
More informationAME 1.5A CMOS LDO AME8815. n General Description. n Functional Block Diagram. n Features. n Typical Application. n Applications
n General Description n Functional Block Diagram The family of linear regulators feature low quiescent current (45µA typ.) with low dropout voltage, making them ideal for battery applications. It is available
More informationOPL530, OPL531, OPL535, OPL536, OPL550, OPL551, OPL560, OPL561, OPL562, OPL563
Features: Choice of four output optio in lowcost sidelooking package Choice of two seitivity optio (OPL560/561/562/563) High noise immunity Direct TTL/LSTTL CMOS interface Data rates to 250 kbaud for all
More informationRT9166B. 600mA, Ultra-Fast Transient Response Linear Regulator. General Description. Features. Ordering Information. Applications. Pin Configurations
Ordering Information Output Voltage 12 : 1.2V Note : Richtek products are : RoHS compliant and compatible with the current requirements of IPC/JEDEC J-STD-020. Suitable for use in SnPb or Pb-free soldering
More information1 pc Charge Injection, 100 pa Leakage, CMOS 5 V/+5 V/+3 V Quad SPST Switches ADG611/ADG612/ADG613
a FEATURE 1 pc Charge Injection 2.7 V to 5.5 V ual upply +2.7 V to +5.5 V ingle upply Automotive Temperature Range 4 C to +125 C 1 pa Max @ 25 C Leakage Currents 85 On-Resistance Rail-to-Rail witching
More informationPRODUCTION DATA SHEET
The positive voltage linear regulator is configured with a fixed 3.3V output, featuring low dropout, tight line, load and thermal regulation. VOUT is controlled and predictable as UVLO and output slew
More informationS-57M1 Series HIGH-SPEED BIPOLAR HALL EFFECT LATCH. Features. Applications. Package. ABLIC Inc., Rev.1.
www.ablic.com www.ablicinc.com HIGH-SPEED BIPOLAR HALL EFFECT LATCH ABLIC Inc., 2011-2013 Rev.1.2_02 The, developed by CMOS technology, is a high-accuracy Hall IC that operates with a high-sensitivity,
More informationSGM7SZ00 Small Logic Two-Input NAND Gate
GENERAL DESCRIPTION The SGM7SZ00 is a single two-input NAND gate from SGMICRO s Small Logic series. The device is fabricated with advanced CMOS technology to achieve ultra-high speed with high output drive
More informationAdvanced Power Electronics Corp. APE mA LOW DROPOUT LINEAR REGULATOR FEATURES DESCRIPTION APPLICATIONS TYPICAL APPLICATION CIRCUIT APE8800
300mA LOW DROPOUT LINEAR REGULATOR FEATURES Low Dropout Voltage of 250mV at 300mA Guaranteed 300mA Output Current Very Low Quiescent Current at about 30uA ±2% Output Voltage Accuracy for 1.5V,1.8V, 2.5V
More informationBOLUTE MXIMUM TING These are stress ratings only and functional operation of the device at these ratings or any other above those indicated in the ope
P0. Buck/Boost/Inverting DCDC ing egulator FETUE upply oltage: Current Limiting Output Current to. djustable Output oltage Operation frequency up to 0KHz Low Quiescent Current Precision % eference vailable
More informationNC7SB3157 TinyLogic Low Voltage UHS Analog Switch 2-Channel Multiplexer/Demultiplexer (Preliminary)
September 1999 Revised November 1999 TinyLogic Low Voltage UHS Analog Switch 2-Channel Multiplexer/Demultiplexer (Preliminary) General Description The is a high performance, Analog Switch 2- channel CMOS
More informationS-13R1 Series REVERSE CURRENT PROTECTION CMOS VOLTAGE REGULATOR. Features. Applications. Packages. ABLIC Inc., Rev.1.
www.ablicinc.com REVERSE CURRENT PROTECTION CMOS VOLTAGE REGULATOR ABLIC Inc., 212-214 Rev.1.2_2 The, developed by using the CMOS technology, is a positive voltage regulator IC of 15 ma output current,
More informationAZ1117C. Description. Features. Applications. Pin Assignments. A Product Line of. Diodes Incorporated LOW DROPOUT LINEAR REGULATOR AZ1117C
LOW DROPOUT LINEAR REGULATOR Description Features The is a low dropout three-terminal regulator. The has been optimized for low voltage where transient response and minimum input voltage are critical.
More informationHT75XX-2 100mA Low Power LDO
100mA Low Power LDO Features Low power consumption Low voltage drop Low temperature coefficient High input voltage (up to 24V) High output current : 100mA Output voltage accuracy: tolerance 1% TO92 SOT89
More information*1. Attention should be paid to the power dissipation of the package when the output current is large.
S-1313 Series www.ablic.com www.ablicinc.com SUPER LOW CURRENT CONSUMPTION LOW DROPOUT CMOS VOLTAGE REGULATOR ABLIC Inc., 211-216 Rev.2.1_1 The S-1313 Series, developed by using the CMOS technology, is
More informationSDT800-STR. Description. Features. Agency Approvals. Applications. Absolute Maximum Ratings. Schematic Diagram. Ordering Information
Description The consists of two phototransistors, each optically coupled to a light emitting diode for DC input operation. Optical coupling between the input IR LED and output phototransistor allows for
More informationSGM8707 Micro-Power, CMOS Input, RRIO, 1.4V, Push-Pull Output Comparator
GENERAL DESCRIPTION The is an ultra low power comparator with a typical power supply current of 3nA. It has the best-in-class power supply current versus propagation delay performance. The propagation
More information2 Input NAND Gate L74VHC1G00
Input NAND Gate The is an advanced high speed CMOS input NAND gate fabricated with silicon gate CMOS technology. It achieves high speed operation similar to equivalent Bipolar Schottky TTL while maintaining
More informationIRF9530, RF1S9530SM. 12A, 100V, Ohm, P-Channel Power MOSFETs. Features. Ordering Information. Symbol. Packaging
IRF953, RF1953M 12A, 1V,.3 Ohm, P-Channel Power MOFETs These are P-Channel enhancement mode silicon gate power field effect transistors. They are advanced power MOFETs designed, tested, and guaranteed
More informationDual High-Voltage Trench MOS Barrier Schottky Rectifier
Dual High-Voltage Trench MOS Barrier Schottky Rectifier Ultra Low V F = 0.53 V at I F = 5.0 A 2 TMBS esmp Series Top View PIN PIN 2 PRIMARY CHARACTERISTICS K Bottom View I F(AV) 2 x A V RRM 0 V I FSM 50
More informationPhotologic Sensor OPL530, OPL531, OPL535, OPL536, OPL550, OPL551, OPL560, OPL561, OPL562, OPL563
Photologic Seor Features: Choice of four output optio in lowcost sidelooking package Choice of two seitivity optio (OPL60/61/62/63) High noise immunity Direct TTL/LSTTL CMOS interface Data rates to 20
More informationLMBZ52xxBLG Series. 225 mw SOT 23 Surface Mount LESHAN RADIO COMPANY, LTD. 1/6
5 mw SOT Surface Mount This series of Zener diodes is offered in the convenient, surface mount plastic SOT package. These devices are designed to provide voltage regulation with minimum space requirement.
More informationThe IK642B is a bi-polar integrated circuit designed for the wiper application in the automotive market. It includes wipe, wash and internal mode.
TECHNICAL DATA INTERAL- and WIPE/WASH WIPER CONTROL IC IK642B The IK642B is a bi-polar integrated circuit designed for the wiper application in the automotive market. It includes wipe, wash and internal
More informationThe ESD5451R is available in DFP1006-2L package. Standard products are Pb-free and Halogen-free. Circuit diagram
ESD5451R 1-Line, Bi-directional, Transient Voltage Suppressors http//:www.sh-willsemi.com Descriptions The ESD5451R is a bi-directional TVS (Transient Voltage Suppressor). It is specifically designed to
More informationContinuous-Time Switch Family
FEATURES AN BENEFITS AEC-Q1 automotive qualified Continuous-time operation Fast power-on time Low noise Stable operation over full operating temperature range Reverse battery protection Solid-state reliability
More informationDetection of both poles, S pole or N pole Active "L", active "H" Nch open-drain output, CMOS output
S-5716 Series www.ablicinc.com LOW CURRENT CONSUMPTION BOTH POLES / UNIPOLAR DETECTION TYPE HALL IC ABLIC Inc., 2011-2015 Rev.1.6_02 The S-5716 Series, developed by CMOS technology, is a high-accuracy
More informationRATIOMETRIC, LINEAR HALL-EFFECT SENSORS
UGN3503 HLL EFFECT SENSOR The UGN3503LT, UGN3503U, and UGN3503U Hall-effect sensors accurately track extremely small changes in magnetic flux density changes generally too small to operate Hall-effect
More informationFPF1003A / FPF1004 IntelliMAX Advanced Load Management Products
August 2012 FPF1003A / FPF1004 IntelliMAX Advanced Load Management Products Features 1.2 V to 5.5 V Input Voltage Operating Range Typical R DS(ON) : - 30 mω at V IN =5.5 V - 35 mω at V IN =3.3 V ESD Protected:
More information74VHC00 Quad 2-Input NAND Gate
Quad 2-Input NAND Gate General Description The HC00 is an advanced high-speed CMOS 2-Input NAND Gate fabricated with silicon gate CMOS technology. It achieves the high-speed operation similar to equivalent
More information200 kpa On-Chip Temperature. Compensated Silicon Pressure Sensors. MPX2200 Series. Pressure. Application Examples. Features. MPX2200 Rev 13, 10/2008
Pressure Rev 13, 10/2008 200 kpa On-Chip Temperature + Compensated ilicon Pressure The series devices are silicon piezoresistive pressure sensor providing a highly accurate and linear voltage output directly
More informationUNISONIC TECHNOLOGIES CO., LTD L16B45 Preliminary CMOS IC
UNISONIC TECHNOLOGIES CO., LTD L16B45 Preliminary CMOS IC 16-BIT CONSTANT CURRENT LED SINK DRIVER DESCRIPTION The UTC L16B45 is designed for LED displays. UTC L16B45 contains a serial buffer and data latches
More informationS-5725 Series HIGH-SPEED BIPOLAR HALL EFFECT LATCH. Features. Applications. Packages. ABLIC Inc., Rev.2.
S-5725 Series www.ablic.com www.ablicinc.com HIGH-SPEED BIPOLAR HALL EFFECT LATCH ABLIC Inc., 2011-2015 Rev.2.5_02 The S-5725 Series, developed by CMOS technology, is a high-accuracy Hall IC that operates
More informationSGM nA, Single Rail-to-Rail I/O Operational Amplifier
GENERAL DESCRIPTION The SGM8041 is guaranteed to operate with a single supply voltage as low as 1.4V, while drawing less than 710nA (TYP) of quiescent current. This device is also designed to support rail-to-rail
More informationBC556B, BC557A, B, C, BC558B. Amplifier Transistors. PNP Silicon BC556B PNP AUDIO 100MA 65V 500MW TO92.
B, A, B, C, B Amplifier Transistors PNP Silicon Features PbFree Packages are Available* B PNP AUDIO 1MA 65 5MW TO92 COLLECTOR 1 MAXIMUM RATINGS Collector - Emitter oltage Collector - Base oltage Rating
More information1.5A Buck/Boost/Inverting DC-DC Switching Regulator
P0. Buck/Boost/Inverting DCDC ing egulator FETUE upply oltage: Current Limiting Output Current to. djustable Output oltage Operation frequency up to 0KHz Low Quiescent Current Precision % eference vailable
More informationSERIALLY PROGRAMMABLE CLOCK SOURCE. Features
DATASHEET ICS307-03 Description The ICS307-03 is a dynamic, serially programmable clock source which is flexible and takes up minimal board space. Output frequencies are programmed via a 3-wire SPI port.
More information