BTA/BTB24, BTA25, BTA26 and T25 Series
|
|
|
- Kory Barker
- 5 years ago
- Views:
Transcription
1 BTA/BTB24, BT5, BT6 and T25 Series SNUBBERLESS & STANDARD 25A TRIACS MAIN FEATURES: Symbol Value Unit I T(RMS) 25 A V DRM /V RRM 6 and 8 V I T (Q1 ) 35 to 5 ma DESCRIPTION Available either in through-hole of surface and T25 mount packages, the BTA/BTB triac series is suitable for general purpose AC power switching. They can be used as an ON/OFF function in applications such as static relays, heating regulation, water heaters, induction motor starting circuits...or for phase control operation in high power motor speed controllers, soft start circuits...the snubberless versions (BTA/BTB...W and T25 series) are specially recommended for use on inductive loads, thanks to their high commutation performances. By using an internal ceramic pad, the BTA series provides voltage insulated tab (rated at 25V RMS) complying with UL standards (File ref.: E81734). ABSOLUTE MAXIMUM RATINS TO-22AB Insulated (BT4) RD91 (BT5) D 2 PAK (T25) TO-22AB (BTB24) TOP3 Insulated (BT6) Symbol Parameter Value Unit I T(RMS) RMS on-state current (full sine wave) D²PAK A Tc = 1 C TO-22AB RD91 25 Tc = 9 C TOP3 Ins. TO-22AB Ins. Tc = 75 C I TSM Non repetitive surge peak on-state F = 6 Hz t = 16.7 ms 26 A current (full cycle, Tj initial = 25 C) F = 5 Hz t = 2 ms 25 I ² t I ² t Value for fusing tp = 1 ms 34 A ² s di/dt Critical rate of rise of on-state current I = 2 x I T, tr 1 ns F = 12 Hz Tj = 125 C 5 A/µs V DSM /V RSM Non repetitive surge peak off-state voltage tp = 1 ms Tj = 25 C V DRM /V RRM + 1 I M Peak gate current tp = 2 µs Tj = 125 C 4 A P (AV) Average gate power dissipation Tj = 125 C 1 W V T stg T j Storage junction temperature range Operating junction temperature range - 4 to to C
2 BTA/BTB24, BT5, BT6 and T25 Series ELECTRICAL CHARACTERISTICS (Tj = 25 C, unless otherwise specified) SNUBBERLESS (3 Quadrants) T25-, BTA/BTB24...W, BT5...W, BT6...W Symbol Test Conditions Quadrant T25 BTA/BTB Unit T2535 CW BW I T (1) I - II - III MAX ma V D = 12 V R L = 33 Ω V T I - II - III MAX. 1.3 V V D V D = V DRM R L = 3.3 kω Tj = 125 C I - II - III MIN..2 V I H (2) I T = 5 ma MAX ma I L I = 1.2 I T I - III MAX ma II dv/dt (2) V D = 67 % V DRM gate open Tj = 125 C MIN V/µs (di/dt)c (2) Without snubber Tj = 125 C MIN A/ms STANDARD (4 Quadrants): BTB24...B, BT5...B, BT6...B Symbol Test Conditions Quadrant Value Unit I T (1) I - II - III 5 ma MAX. V D = 12 V R L = 33 Ω IV 1 V T ALL MAX. 1.3 V V D V D = V DRM R L = 3.3 kω Tj = 125 C ALL MIN..2 V I H (2) I T = 5 ma MAX. 8 ma I L I = 1.2 I T I - III - IV MAX. 7 ma II 16 dv/dt (2) V D = 67 % V DRM gate open Tj = 125 C MIN. 5 V/µs (dv/dt)c (2) (di/dt)c = 13.3 A/ms Tj = 125 C MIN. 1 V/µs STATIC CHARACTERISTICS Symbol Test Conditions Value Unit V TM (2) I TM = 35 A tp = 38 µs Tj = 25 C MAX V V to (2) Threshold voltage Tj = 125 C MAX..85 V R d (2) Dynamic resistance Tj = 125 C MAX. 16 mω I DRM V DRM = V RRM Tj = 25 C 5 µa MAX. I RRM Tj = 125 C 3 ma Note 1: minimum IT is guaranted at 5% of IT max. Note 2: for both polarities of referenced to
3 BTA/BTB24, BT5, BT6 and T25 Series THERMAL RESISTANCES Symbol Parameter Value Unit R th(j-c) Junction to case (AC) D ² PAK C/W.8 TO-22AB RD91 (Insulated) TOP3 Insulated 1.1 TO-22AB Insulated 1.7 R th(j-a) Junction to ambient S = 1 cm ² D ² PAK 45 C/W S: Copper surface under tab PRODUCT SELECTOR TOP3 Insulated 5 TO-22AB TO-22AB Insulated 6 Part Number Voltage (xxx) 6 V 8 V Sensitivity Type Package BTB24-xxxB X X 5 ma Standard TO-22AB BTA/BTB24-xxxBW X X 5 ma Snubberless TO-22AB BTA/BTB24-xxxCW X X 35 ma Snubberless TO-22AB BT5-xxxB X X 5 ma Standard RD-91 BT5-xxxBW X X 5 ma Snubberless RD-91 BT5-xxxCW X X 35 ma Snubberless RD-91 BT6-xxxB X X 5 ma Standard TOP3 Ins. BT6-xxxBW X X 5 ma Snubberless TOP3 Ins. BT6-xxxCW X X 35 ma Snubberless TOP3 Ins. T2535-xxx X X 35 ma Snubberless D ² PAK BTB: Non insulated TO-22AB package ORDERIN INFORMATION BT A 24-6 BW (R) TRIAC SERIES INSULATION: A: insulated B: non insulated CURRENT: 24: 25A in TO-22AB 25: 25A in Rd91 26: 25A in TOP3 VOLTAE: 6: 6V 8: 8V SENSITIVITY & TYPE B: 5mA STANDARD BW: 5mA SNUBBERLESS CW: 35mA SNUBBERLESS PACKIN MODE Blank: Bulk R: Tube
4 BTA/BTB24, BT5, BT6 and T25 Series TRIAC SERIES CURRENT: 25A T (-TR) SENSITIVITY: 35: 35mA VOLTAE: 6: 6V 8: 8V PACKAE: 2 : D PAK PACKIN MODE: Blank: Tube -TR: Tape & Reel
5 BTA/BTB24, BT5, BT6 and T25 Series Fig. 1: Maximum power dissipation versus RMS on-state current (full cycle). Fig. 2-1: RMS on-state current versus case temperature (full cycle). P (W) 3 IT(RMS) (A) BTB/T BT BT5/ IT(RMS) (A) Tc( C) Fig. 2-2: D²PAK RMS on-state current versus ambient temperature (printed circuit board FR4, copper thickness: 35 µm), full cycle. Fig. 3: Relative variation of thermal impedance versus pulse duration. IT(RMS) (A) 4. 2 DPAK (S=1cm ) Tamb( C) K=[Zth/Rth] 1E+ 1E-1 1E-2 Zth(j-c) Zth(j-a) BTA/BTB24/T25 Zth(j-a) BT6 tp (s) 1E-3 1E-3 1E-2 1E-1 1E+ 1E+1 1E+2 5E+2 Fig. 4: values). On-state characteristics (maximum Fig. 5: Surge peak on-state current versus number of cycles. ITM (A) 3 ITSM (A) 3 1 Tj max 25 2 Non repetitive Tj initial=25 C t=2ms One cycle 1 Tj=25 C 15 1 Repetitive Tc=75 C Tj max. Vto =.85 V Rd = 16 mω VTM (V) Number of cycles
6 BTA/BTB24, BT5, BT6 and T25 Series Fig. 6: Non-repetitive surge peak on-state current for a sinusoidal pulse with width tp < 1ms, and corresponding value of I²t. Fig. 7: Relative variation of gate trigger current, holding current and latching current versus junction temperature (typical values). 3 1 ITSM (A), I²t (A²s) di/dt limitation: 5A/µs Tj initial=25 C IT,IH,IL[Tj] / IT,IH,IL [Tj=25 C] IT 1.5 ITSM 1. IH & IL tp (ms) I²t.5 Tj( C) Fig. 8: Relative variation of critical rate of decrease of main current versus (dv/dt)c (typical values). Fig. 9: Relative variation of critical rate of decrease of main current versus junction temperature. (di/dt)c [(dv/dt)c] / Specified (di/dt)c BW/CW/T B (dv/dt)c (V/µs) (di/dt)c [Tj] / (di/dt)c [Tj specified] Tj ( C) Fig. 1: D²PAK Thermal resistance junction to ambient versus copper surface under tab (printed circuit board FR4, copper thickness: 35 µm). Rth(j-a) ( C/W) 8 D²PAK S(cm²)
7 BTA/BTB24, BT5, BT6 and T25 Series PACKAE MECHANICAL DATA D²PAK (Plastic) DIMENSIONS A REF. Millimeters Inches L L2 L3 E B2 B 2. MIN. FLAT ZONE C2 C R V2 D Min. Typ. Max. Min. Typ. Max. A B B C C D E L L L R.4.16 V2 8 8 FOOTPRINT DIMENSIONS (in millimeters) D²PAK (Plastic)
8 BTA/BTB24, BT5, BT6 and T25 Series PACKAE MECHANICAL DATA RD91 (Plastic) DIMENSIONS L2 L1 REF. Millimeters Inches Min. Max. Min. Max. B2 C C2 N2 C1 N1 B1 A B B B C C E3 A F I B C E F I L L N N PACKAE MECHANICAL DATA TOP3 (Plastic) REF. Millimeters DIMENSIONS Inches Min. Typ. Max. Min. Typ. Max. A B C D E F H J K L P R
9 BTA/BTB24, BT5, BT6 and T25 Series PACKAE MECHANICAL DATA TO-22AB (Plastic) DIMENSIONS B C REF. Millimeters Inches b2 Min. Typ. Max. Min. Typ. Max. l4 l3 I l2 L A a1 a2 c2 F A a a B b b C c c e F I I b1 e M c1 L l l M
BTA/BTB24, BTA25, BTA26 and T25 Series
BTA/BTB24, BT5, BT6 and T25 Series SNUBBERLESS & STANDARD 25A TRIACS MAIN FEATURES: Symbol Value Unit I T(RMS) 25 A V DRM /V RRM 6 and 8 V I T (Q1 ) 35 to 5 ma DESCRIPTION Available either in through-hole
BTA/BTB16 and T16 Series
BTA/BTB16 and T16 Series SNUBBERLESS, LOIC LEVEL & STANDARD 16A TRIACS MAIN FEATURES: Symbol Value Unit I T(RMS) 16 A V DRM /V RRM 6, 7 and 8 V I T (Q1 ) 1 to 5 ma DESCRIPTION Available either in through-hole
BTA/BTB08 and T8 Series
BTA/BTB08 and T8 Series SNUBBERLESS, LOIC LEVEL & STANDARD 8A TRIACS MAIN FEATURES: Symbol Value Unit I T(RMS) 8 A V DRM /V RRM 600 and 800 V I T (Q1 ) 5to50 ma DPAK (T8-B) D 2 PAK (T8-) DESCRIPTION Available
ELECTROSÓN BTA24, BTB24, BTA25 BTA26, BTB26, T A standard and Snubberless triacs. Features. Applications. Description
BT4, BTB24, BT5 BT6, BTB26, T25 25 A standard and Snubberless triacs Features High current triac Low thermal resistance with clip bonding High commutation (4 quadrant) or very high commutation (3 quadrant)
BTA12, BTB12 and T12 Series
BTA12, BTB12 and T12 Series SNUBBERLESS, LOIC LEVEL & STANDARD 12A TRIACS Table 1: Main Features Symbol Value Unit I T(RMS) 12 A V DRM /V RRM 6 and 8 V I T (Q1 ) 5 to 5 ma A1 DESCRIPTION Available either
T4 Series 4A TRIACS. Table 1: Main Features Symbol Value Unit I T(RMS) 4 A. V DRM /V RRM 600 to 800 V. I GT (Q1 ) 5 to 35 ma
T4 Series SNUBBERLESS & LOIC LEVEL 4A TRIACS Table 1: Main Features Symbol Value Unit I T(RMS) 4 A V DRM /V RRM 600 to 800 V I T (Q1 ) 5 to 35 ma DESCRIPTION Based on ST s Snubberless / Logic level technology
TN12, TS12 and TYNx12 Series
TN12, TS12 and TYNx12 Series SENSITIVE & STNDRD 12 SCRs MIN FETURES: Symbol Value Unit I T(RMS) 12 V DRM /V RRM 600 to 1000 V K I T 0.2 to 15 m DESCRIPTION vailable either in sensitive (TS12) or standard
TN8, TS8 and TYNx08 Series
SENSITIVE & STNDRD 8 SCRs MIN FETURES: Symbol Value Unit I T(RMS) 8 K V DRM /V RRM 600 to 1000 V I T 0.2 to 15 m DESCRIPTION vailable either in sensitive (TS8) or standard (TN8 / TYN) gate triggering levels,
T610T-8FP. 6 A logic level Triac. Description. Features. Applications
6 A logic level Triac Description Datasheet production data Available in through-hole fullpack package, the Triac can be used for the on/off or phase angle control function in general purpose AC switching.
T810H. High temperature 8 A sensitive TRIACs. Features. Applications. Description. Medium current TRIAC
T8H High temperature 8 A sensitive TRIACs Features Medium current TRIAC Logic level sensitive TRIAC 5 C max. T j turn-off commutation G Clip bounding A RoHS (22/95/EC) compliant packages Applications The
Table 3: Absolute Ratings (limiting values) Symbol Parameter Value Unit I T(RMS)
TYN61M 1 SCR Table 1: Main Features Symbol Value Unit I T(RMS) 1 V DRM /V RRM 6 V I T (min./max.) 1.5 / 5 m K DESCRIPTION The TYN61M SCR is suitable to fit modes of control found in applications such as
JIEJIE MICROELECTRONICS CO., Ltd
JIJI MIROLTRONIS O., Ltd T0610/T060/T0635/T0650 Series 6 TRIs Rev.3.0 SRIPTION: T06xx series triacs of high junction temperature with high dv/dt rate with strong resistance to electromagnetic interference
Symbol Parameter Value Unit RMS on-state current (full sine wave) Qxx35P5 T C. f = 120 Hz T J. 10 μs I GT
Description 30 mp / 35 mp bi-directional solid state switch series is designed for C switching and phase control applications such as motor speed and temperature modulation controls, lighting controls,
Qxx15xx & Qxx16xHx Series
Teccor brand Thyristors Description 15 mp and 16 mp bi-directional solid state switch series is designed for C switching and phase control applications such as motor speed and temperature modulation controls,
ST1230C..K SERIES 1745A. Features. Typical Applications. Major Ratings and Characteristics. Bulletin I25194 rev. B 01/00. case style A-24 (K-PUK)
ST1230C..K SERIES PHASE CONTROL THYRISTORS Hockey Puk Version Features Center amplifying gate Metal case with ceramic insulator International standard case A-24 (K-PUK) High profile hockey-puk 1745A Typical
ST2600C..R SERIES 2630A. Features. Typical Applications. Major Ratings and Characteristics. Bulletin I25199 rev. B 02/00 (R-PUK)
ST2600C..R SERIES PHASE CONTROL THYRISTORS Hockey Puk Version Features Double side cooling High surge capability High mean current Fatigue free 2630A Typical Applications DC motor controls Controlled DC
Phase Control Thyristor Type SKT552/16E
Date:- 4 Feb 22 Data Sheet Issue:- 3 Absolute Maximum Ratings Phase Control Thyristor Type VOLTAGE RATINGS Symbol Parameter MAXIMUM UNITS V DRM Repetitive peak off-state voltage, (note 1) 16 V V DSM Non-repetitive
Teccor brand Thyristors Silicon Controlled Rectifiers
Description New device series offers high static dv/dt and lower turn off (t q ) sensitive SCR with its small die planar construction SCRs junctions are glass-passivated to ensure long term reliability
Thyristors 6 Amp Sensitive & Standard SCRs. Sxx06xSx & Sxx06x Series
Sxx06xSx & Sxx06x Series RoHS Description This Sxx06x SCR series is ideal for uni-directional switch applications such as phase control, heating, motor speed controls, converters/rectifiers and capacitive
Sensitive SCRs. ( Amps) Features. Electrically Isolated Packages. Glass Passivation
Selected Packages* U.L. RECOGNIZED File #E71639 TO - 92 THERMOTAB TO-2AB TO-2AB A K G Sensitive SCRs (.8 1 ) 5 General Description The Teccor Electronics, Inc. line of sensitive SCR semiconductors are
K G. Order code 400 V 600 V Min. Max. P0111MA 1AA3 X 4 µa 25 µa TO-92. P0111MN 5AA4 X 4 µa 25 µa SOT-223. P0115DA 5AL3 X 15 µa 50 µa TO-92
Sensitive high immunity SCRs up to.8 Features I T(RMS) up to.8 V DRM /V RRM and 6 V I GT from.5 to 5 µ G K Description Thanks to highly sensitive triggering levels, the P11xx SCR series is suitable for
JIEJIE MICROELECTRONICS CO., Ltd
JIJI MIROLTRONIS O., Ltd 8 TRIs Rev.3. SRIPTION: The JT8 series of double mesa technology provide high interference immunity, They can be used as an static ON/O function in electrical control system, and
30 to 35 ma G. Samples. Symbol Parameter Test Conditions Value Unit RMS on-state current T C = 80 C 20 A I T(AV)
Sxx20x & Sxx25x Series RoHS Description Excellent unidirectional switches for phase control applications such as heating and motor speed controls. Standard phase control SCRs are triggered with few milliamperes
Teccor brand Thyristors 1.5 Amp Sensitive SCRs
Description Excellent unidirectional switches for phase control applications such as heating and motor speed controls. Sensitive gate SCRs are easily triggered with microamps of current as furnished by
Samples. Symbol Parameter Test Conditions Value Unit RMS on-state current T C = 40 C 1.5 A I T(AV) Average on-state current T C
TCR22-x Series RoHS Description Excellent unidirectional switches for phase control applications such as heating and motor speed controls. Sensitive gate SCRs are easily triggered with microamps of current
Passivated ultra sensitive gate thyristor in a SOT54 plastic package. Earth leakage circuit breakers or Ground Fault Circuit Interrupters (GFCI)
Rev. 2 31 July 28 Product data sheet 1. Product profile 1.1 General description Passivated ultra sensitive gate thyristor in a SOT54 plastic package. 1.2 Features Ultra sensitive gate Direct interfacing
ST303C..L SERIES 515A. Features. Typical Applications. Major Ratings and Characteristics. Bulletin I25186 rev. A 05/94. case style TO-200AC (B-PUK)
ST303C..L SERIES INVERTER GRADE THYRISTORS Hockey Puk Version Features Metal case with ceramic insulator International standard case TO-AC (B-PUK) All diffused design Center amplifying gate Guaranteed
(6 A to 40 A) Features
Selected Packages* File #E71639 U.L. RECONIZED *TO-22 *TO-218X *TO-218 TO-263 D 2 Pak TO-252 D-Pak TO-251 V-Pak (6 A to 4 A) E4 eneral Description Teccor offers bidirectional alternistors with current
Teccor brand Thyristors 0.8 Amp Sensitive SCRs
Description Excellent unidirectional switches for phase control applications such as heating and motor speed controls. Sensitive gate SCRs are easily triggered with microamps of current as furnished by
Samples. Symbol Parameter Test Conditions Value Unit RMS on-state current T C = 90 C 55 A I T(AV) Average on-state current T C
Sxx55x Series RoHS Description Excellent unidirectional switches for phase control applications such as heating and motor speed controls. Standard phase control SCRs are triggered with few milliamperes
ST700C..L SERIES 910A. Features. Typical Applications. Major Ratings and Characteristics. Bulletin I25190 rev. D 04/00. case style TO-200AC (B-PUK)
ST0C..L SERIES PHASE CONTROL THYRISTORS Hockey Puk Version Features Center amplifying gate Metal case with ceramic insulator International standard case TO-0AC (B-PUK) 910A Typical Applications DC motor
Teccor brand Thyristors 65 / 70 Amp Standard SCRs
Sxx65x & Sxx70x Series RoHS Description Excellent unidirectional switches for phase control applications such as heating and motor speed controls. Standard phase control SCRs are triggered with few milliamperes
Description. Symbol Value Unit SOT23-3L (P010xxL) I T(RMS) up to 0.8 A V DRM /V RRM up to 600 V. I GT From 5 to 200 µa
P010XX Sensitive standard SCRs up to 0.8 Datasheet production data Description K G TO-92 (P010xx) G K K G SOT-223 (P0102xN) Thanks to highly sensitive triggering levels, the P010XX SCR series is suitable
STTH5L06. Turbo 2 ultrafast high voltage rectifier. Description. Features
Turbo 2 ultrafast high voltage rectifier Description Datasheet - production data The STTH5L06 is developed using St's Turbo 2 600 V technology. It is well-suited as a boost diode, especially for use in
STTH8R06. Turbo 2 ultrafast high voltage rectifier. Description. Features
Turbo 2 ultrafast high voltage rectifier Description Datasheet - production data The STTH8R06, which uses ST Turbo 2 600 V technology, is specially suited as boost diode in continuous mode power factor
STTH10LCD06. Turbo 2 ultrafast - high voltage rectifier for flat panel displays. Description. Features
STTH1LCD6 Turbo 2 ultrafast - high voltage rectifier for flat panel displays Description Datasheet - production data The STTH1LCD6 uses ST Turbo 2 technology. This device is suited for power applications
STPS1045B. Power Schottky rectifier. Description. Features
Power Schottky rectifier Datasheet production data Description High voltage Schottky rectifier suited for switch mode power supply and other power converters. Packaged in DPAK, this device is intended
Double Thyristor Module For Phase Control MT A2
Electrically isolated base plate Industrial standard package Simplified mechanical design, rapid assembly Pressure contact PROTON-ELECTROTEX RUSSIA Double Thyristor Module For Phase Control MT3-595-18-A2
P100 SERIES 25A PASSIVATED ASSEMBLED CIRCUIT ELEMENTS. Features. Description. Major Ratings and Characteristics. Bulletin I27125 rev.
P0 SERIES PASSIVATED ASSEMBLED CIRCUIT ELEMENTS Features Glass passivated junctions for greater reliability Electrically isolated base plate 25A Available up to 200 V RRM, V DRM High dynamic characteristics
STPS2030CT/CG/CR LOW DROP POWER SCHOTTKY RECTIFIER MAJOR PRODUCTS CHARACTERISTICS. 2x10A 30 V Tj (max) 150 C
STPS23CT/CG/CR LOW DROP POWER SCHOTTY RECTIFIER MAJOR PRODUCTS CHARACTERISTICS I F(AV) V RRM 2xA 3 V Tj (max) 5 C V F (max).4 V FEATURES AND BENEFITS VERY SMALL CONDUCTION LOSSES NEGLIGIBLE SWITCHING LOSSES
Thyristors. Sxx10xSx & Sxx10x Series. 10 Amp Sensitive & Standard SCRs. Description
Sxx10xSx & Sxx10x Series RoHS Description This Sxx10x SCR series is ideal for uni-directional switch applications such as phase control, heating, motor speed controls, converters/rectifiers and capacitive
Symbol Parameter Test Conditions Value Unit Sxx15L T C. = 90 C 15 RMS on-state current Sxx16R = 90 C 9.5 I T(AV) Sxx16R
Sxx15x & Sxx16x Series RoHS Description Excellent unidirectional switches for phase control applications such as heating and motor speed controls. Standard phase control SRs are triggered with few milliamperes
Teccor brand Thyristors 0.8 Amp Sensitive SCRs
Description Excellent unidirectional switches for phase control applications such as heating and motor speed controls. Sensitive gate SCRs are easily triggered with micromps of current as furnished by
Distributed by: www.jameco.com 1-800-831-4242 The content and copyrights of the attached material are the property of its owner. STTH112/A/U HIGH VOLTAGE ULTRAFAST RECTIFIER Main product characteristics
Teccor brand Thyristors 0.8 Amp Sensitive SCRs
EC103xx & SxSx Series RoHS Description Excellent unidirectional switches for phase control applications such as heating and motor speed controls. Sensitive gate SCRs are easily triggered with micromps
TURBO 2 ULTRAFAST HIGH VOLTAGE RECTIFIER
TURBO 2 ULTRAAST HIGH VOLTAGE RECTIIER Table 1: Main Product Characteristics I (AV) Up to 2 x A V RRM 6 V T j 175 C V (typ).95 V t rr (max) 55 ns EATURES AND BENEITS Ultrafast switching Low reverse current
STTH8R03G/D 300V HYPERFAST RECTIFIER MAJOR PRODUCT CHARACTERISTICS. 8A 300 V I RM (typ.) Tj (max) 175 C TO-220AC STTH8R03D
STTH8R3G/D 3V HYPERFST RECTIFIER MJOR PRODUCT CHRCTERISTICS I F(V) V RRM 8 3 V I RM (typ.) 4 Tj (max) 175 C V F (max) 1.3 V trr (max) 3 ns FETURES ND BENEFITS Designed for high frequency applications.
STTH10R04. High efficiency rectifier. Description. Features
STTH1R4 High efficiency rectifier Datasheet - production data Features K A A NC D 2 PAK K Ultrafast recovery Low power losses High surge capability Low leakage current High junction temperature ECOPACK
STPS1L40M LOW DROP POWER SCHOTTKY RECTIFIER. Table 1: Main Product Characteristics I F(AV) V RRM. 1 A 40 V T j (max) 150 C V F (max) 0.
LOW DROP POWER SCHOTTKY RECTIFIER Table 1: Main Product Characteristics I F(AV) V RRM 1 A 40 V T j (max) 150 C V F (max) 0 V C A FEATURES AND BENEFITS Very small conduction losses Negligible switching
STPS41L45CG/CT/CR LOW DROP POWER SCHOTTKY RECTIFIER. MAIN PRODUCTS CHARACTERISTICS 2x20A 45 V Tj (max) 150 C
STPS41L45CG/CT/CR LOW DROP POWER SCHOTTKY RECTIFIER MIN PRODUCTS CHRCTERISTICS I F(V) V RRM 2x2 45 V Tj (max) 15 C V F (max).47 V 2 K FETURES ND BENEFITS VERY SMLL CONDUCTION LOSSES NEGLIGIBLE SWITCHING
ST333C..L SERIES 620A. Features. Typical Applications. Major Ratings and Characteristics. Bulletin I25187 rev. B 04/00. case style TO-200AC (B-PUK)
ST333C..L SERIES INVERTER GRADE THYRISTORS Hockey Puk Version Features Metal case with ceramic insulator International standard case TO-AC (B-PUK) All diffused design Center amplifying gate Guaranteed
STPS2H V power Schottky rectifier. Datasheet. Features. Description. Negligible switching losses
Datasheet 100 V power Schottky rectifier Features A Negligible switching losses A High junction temperature capability Low leakage current K SMA K SMB Good trade-off between leakage current and forward
ST733C..L SERIES 940A. Features. Typical Applications. Major Ratings and Characteristics. Bulletin I25188 rev. A 04/00. case style TO-200AC (B-PUK)
ST733C..L SERIES INVERTER GRADE THYRISTORS Hockey Puk Version Features Metal case with ceramic insulator International standard case TO-AC (B-PUK) All diffused design Center amplifying gate Guaranteed
STTH312B. Ultrafast recovery V diode. Main product characteristics. Features and benefits. Description. Order codes
STTH31 Ultrafast recovery - 1 V diode Main product characteristics I (AV) 3 A V RRM 1 V T j 175 C V (typ) 1.15 V t rr (typ) 55 ns K A K eatures and benefits Ultrafast, soft recovery Very low conduction
STTH16R04CT. Ultrafast recovery diode. Main product characteristics. Features and benefits. Description. Order codes TO-220AB TO-220FPAB
Ultrafast recovery diode Main product characteristics I F(AV) 2 X 8 A A1 A2 K V RRM 4 V T j 175 C V F (typ) t rr (typ).9 V 25 ns A1 K A2 A1 A2 K Features and benefits TO-22AB T TO-22FPAB FP Very low switching
Thyristor Modules Thyristor/Diode Modules
MCC MCD Thyristor Modules Thyristor/Diode Modules I TRMS = x 5 I TM = x RRM = -8 RSM RRM Type DSM DRM MCC -io MCD -io 5 4 MCC -4io MCD -4io 7 6 MCC -6io MCD -6io 9 8 MCC -8io MCD -8io 7 6 5 4 E787 Symbol
BAR42FILM BAR43FILM SMALL SIGNAL SCHOTTKY DIODE. Table 1: Main Product Characteristics I F(AV) 0.1 A V RRM. 30 V T j 150 C 0.33 and 0.
BR42FILM BR43FILM SMLL SIGNL SCHOTTY DIODE Table 1: Main Product Characteristics I F(V) 0.1 V RRM 30 V T j 150 C V F (max) 0.33 and 0.40 V FETURES ND BENEFITS Very small conduction losses Negligible switching
EV Series 1.5 Amp Sensitive SCRs. Description. Features. Surge capability > 15Amps Blocking voltage (V DRM / V RRM.
Sx02xS Series RoHS Description New mp sensitive gate SR series offers high static dv/dt with low turn off time (tq) through small die planar construction design. ll SR s junctions are glasspassivated to
3 1/4. Features / Advantages: Applications: Package: SOT-227B (minibloc)
MCO5-6io hyristor RRM = 6 A = 57A =. Single hyristor Part number MCO5-6io Backside: isolated 3 /4 Features / Advantages: Applications: Package: SO-7B (minibloc) hyristor for line frequency Planar passivated
5SGA 15F2502. Gate turn-off Thyristor. V DRM = 2500 V I TGQM = 1500 A I TSM = 10 ka V T0 = 1.55 V r T = 0.63 mω V DClin = 1400 V
V DRM = 2500 V I TGQM = 1500 A I TSM = 10 ka V T0 = 1.55 V r T = 0.63 mω V DClin = 1400 V Gate turn-off Thyristor 5SGA 15F2502 Doc. No. 5SYA 1214-01 Aug. 2000 Patented free-floating silicon technology
Phase Control Thyristor Types N2500VC120 to N2500VC160
WESTCODE Date:- 2 Nov, 21 Data Sheet Issue:- 1 Phase Control Thyristor Types N25VC12 to N25VC16 Absolute Maximum Ratings VOLTAGE RATINGS MAXIMUM LIMITS VDRM Repetitive peak off-state voltage, (note 1)
STTH212RL. High voltage ultrafast diode. Main product characteristics. Features and benefits. Order codes. Description DO-201AD STTH212
High voltage ultrafast diode Main product characteristics I F(AV) 2 A A K V RRM 12 V T j 175 C V F (typ) 1. V t rr (max) Features and benefits Low forward voltage drop High reliability High surge current
ST223C..C SERIES 390A. Features. Typical Applications. Major Ratings and Characteristics. Bulletin I25174 rev. B 04/00. case style TO-200AB (A-PUK)
ST223C..C SERIES INVERTER GRADE THYRISTORS Hockey Puk Version Features Metal case with ceramic insulator International standard case TO-0AB (A-PUK) All diffused design Center amplifying gate Guaranteed
Features / Advantages: Applications: Package: Y4
hyristor Module RRM = 2x 4 A = 26A =. Phase leg Part number MCC2-4io Backside: isolated 3 2 6 7 4 Features / Advantages: Applications: Package: Y4 hyristor for line frequency Planar passivated chip Long-term
ST183C..C SERIES 370A. Features. Typical Applications. Major Ratings and Characteristics. Bulletin I25178 rev. B 04/00. case style TO-200AB (A-PUK)
ST83C..C SERIES INVERTER GRADE THYRISTORS Hockey Puk Version Features Metal case with ceramic insulator International standard case TO-AB (A-PUK) All diffused design Center amplifying gate Guaranteed high
1000PT Series. Phase Control Thyristors (Hockey PUK Version), 1000A FEATURES TYPICAL APPLICATIONS. RoHS. Nell High Power Products.
0PT Series Phase Control Thyristors (Hockey PUK ersion), 0 FETURES Center amplifying gate Metal case with ceramic insulator lnternational standard case TO-0C (B-PUK) Nell s C-type Capsule Compliant to
5SGA 20H2501. Gate turn-off Thyristor. V DRM = I TGQM = 2000 A I TSM = 16 ka V T0 = 1.66 V r T = 0.57 mω V DClin = 1400 V
V DRM = 25 V I TGQM = 2 A I TSM = 16 ka V T = 1.66 V r T =.57 mω V DClin = 14 V Gate turn-off Thyristor Doc. No. 5SYA125-1 Jun. 4 Patented free-floating silicon technology Low on-state and switching losses
STTH60SW03C. Turbo 2 ultrafast high voltage rectifier. Description. Features
STTH6SW3C Turbo 2 ultrafast high voltage rectifier A1 A2 K Description Datasheet production data The STTH6SW3C uses ST Turbo 2 3 V technology. It is especially suited to be used for DC/DC and DC/AC converters
ABB 5STP12F4200 Control Thyristor datasheet
ABB 5STP12F4200 Control Thyristor datasheet http://www.manuallib.com/abb/5stp12f4200-control-thyristor-datasheet.html Patented free-floating silicon technology Low on-state and switching losses Designed
STTH15L06. Turbo 2 ultrafast high voltage rectifier. Description. Features
STTH15L6 Turbo 2 ultrafast high voltage rectifier Datasheet - production data Description K A K A The STTH15L6, which is using ST Turbo 2 6 V technology, is specially suited for use in switching power
5SGF 30J4502. Gate turn-off Thyristor PRELIMINARY. V DRM = 4500 V I TGQM = 3000 A I TSM = 24 ka V T0 = 1.80 V r T = 0.70 mω V DClin = 3000 V
V DRM = 4500 V I TGQM = 3000 A I TSM = 24 ka V T0 = 1.80 V r T = 0.70 mω V DClin = 3000 V Gate turn-off Thyristor 5SGF 30J4502 PRELIMINARY Doc. No. 5SYA 1211-04 Aug. 2000 Patented free-floating silicon
Features / Advantages: Applications: Package: Y4
hyristor Module RRM = 2x 16 A = 181A = 1.3 Phase leg Part number MCC162-16io1 Backside: isolated 3 1 2 6 7 5 4 Features / Advantages: Applications: Package: Y4 hyristor for line frequency Planar passivated
not Recommend for New Design TM55DZ/CZ-M,-H MEDIUM POWER GENERAL USE
PPLICTION DC motor control, NC equipment, C motor control, Contactless switches, E lectric furnace temperature control, Light dimmers OUTLINE DRWING & CIRCUIT DIGRM 9. K G K1 1. 0 0 M G1 φ6. 1. 6 Tab#,
Negligible switching losses. Low forward voltage drop Surface mount miniature packages Avalanche rated ECOPACK 2 compliant
Datasheet 60 V - 1 power Schottky rectifier K Features Negligible switching losses K SM K DO-41 Low forward voltage drop Surface mount miniature packages valanche rated ECOPCK 2 compliant K STmite flat
Silicon carbide Power MOSFET 650 V, 90 A, 18 mω (typ., T J = 25 C) in an H²PAK-7 package. Order code V DS R DS(on) max. I D
Datasheet Silicon carbide Power MOSFET 650 V, 90 A, 18 mω (typ., T J = 25 C) in an H²PAK-7 package TAB Features Order code V DS R DS(on) max. I D 1 H2PAK-7 7 SCTH90N65G2V-7 650 V 25 mω 90 A Very high operating
Phase Control Thyristor Types N3533Z#140 to N3533Z#220 Old Type No.: N1400CH02-20
WESTCODE An IXYS Company Date:- 18 Sept 27 Data Sheet Issue:- 2 Phase Control Thyristor Types N3533Z#14 to N3533Z#22 Old Type No.: N14CH2-2 Absolute Maximum Ratings VOLTAGE RATINGS MAXIMUM LIMITS V DRM
Asymmetric Gate turn-off Thyristor 5SGA 30J4502
V DRM = 45 V I TGQM = 3 A I TSM = 24 1 3 A V T = 2.2 V r T =.6 mω V Dclink = 28 V Asymmetric Gate turn-off Thyristor 5SGA 3J452 Patented free-floating silicon technology Low on-state and switching losses
Thyristor Modules Thyristor/Diode Modules
Thyristor Modules Thyristor/Diode Modules I TRMS = 2x 8 I TVM = 2x 6 RM = 8-8 V SM RM Type V DSM V DRM V V Version B 8B Version B 8B 9 8 MCC 95-8 iob / io8b -8 iob / io8b 3 MCC 95-2 iob / io8b -2 iob /
5STP 18F1801 Old part no. T
5STP 18F181 Phase Control Thyristor Properties 5STP 18F181 Old part no. T 918-177-18 Key Parameters High operational capability V DRM, V RRM = 1 8 V Possibility of serial and parallel connection I TAVm
8ETU04 8ETU04S 8ETU04-1
8ETU04 8ETU04S 8ETU04- Ultrafast Rectifier Features Ultrafast Recovery Time Low Forward Voltage Drop Low Leakage Current 75 C Operating Junction Temperature t rr = 60ns I F(AV) = 8Amp V R = 400V Description/
STTH1R04. Ultrafast recovery diode. Description. Features
STTH1R4 Ultrafast recovery diode Datasheet - production data DO-41 STTH1R4 A K DO-15 STTH1R4Q Band indicates cathode side. Description The STTH1R4 series uses ST's new 4 V planar Pt doping technology.
STD5N20L N-CHANNEL 200V Ω - 5A DPAK STripFET MOSFET
N-CHANNEL 200V - 0.65Ω - 5A DPAK STripFET MOSFET Table 1: General Features TYPE V DSS R DS(on) I D Pw Figure 1: Package STD5N20L 200 V < 0.7 Ω 5 A 33 W TYPICAL R DS (on) = 0.65 Ω @ 5V CONDUCTION LOSSES
TURBO 2 ULTRAFAST HIGH VOLTAGE RECTIFIER
STTH5R6 TURBO 2 ULTRST HIGH VOLTGE RECTIIER Table 1: Main Product Characteristics I (V) 5 V RRM 6 V T j 175 C V (typ) 1.4 V t rr (max) 4 ns ETURES ND BENEITS Ultrafast switching Low reverse recovery current
ST303C..C SERIES 620A INVERTER GRADE THYRISTORS. Features. Typical Applications. Major Ratings and Characteristics. Bulletin I25172 rev.
ST303C..C SERIES INVERTER GRADE THYRISTORS Puk Version Features Metal case with ceramic insulator International standard case TO-AB (E-PUK) All diffused design Center amplifying gate Guaranteed high dv/dt
30ETH06 30ETH06S 30ETH06-1
Hyperfast Rectifier Features Hyperfastfast Recovery Time Low Forward Voltage Drop Low Leakage Current 75 C Operating Junction Temperature Dual Diode Center Tap 30ETH06 30ETH06S 30ETH06- t rr = 8ns typ.
Asymmetric Integrated Gate- Commutated Thyristor 5SHY 35L4503
V DRM = 45 V I TGQM = 4 A I TSM = 32 ka V T =.4 V r T =.325 mω V DClink = 28 V Asymmetric Integrated Gate- Commutated Thyristor 5SHY 35L453 Highest snubberless turn-off rating Suitable for series connection
5SDF 08H6005 PRELIMINARY
V RRM = 5500 V (AV)M = 585 A SM = 18 10 3 A V (T0) = 4.5 V r T = 1.3 mw V DClink = 3300 V Fast Recovery Diode 5SDF 08H6005 PRELIMINARY Patented free-floating technology Industry standard housing Cosmic
MTC-500, MTK-500, MTA-500 Dual SCR Power Module
KKMTx5, December29 version MTC-5, MTK-5, MTA-5 s are designed for use in power electronic circuits and equipment under normal operating conditions. KEY PARAMETERS U DRM, U RRM I T(AV) I TSM du/dt* di/dt
Phase Control Thyristor Types N1114LS120 to N1114LS180
WESTCODE Date:- 6 Feb, 1 Data Sheet Issue:- 1 Phase Control Thyristor Types N1114LS1 to N1114LS18 Absolute Maximum Ratings VOLTAGE RATINGS MAXIMUM LIMITS VDRM Repetitive peak off-state voltage, (note 1)
Very low conduction losses Low forward voltage drop Low thermal resistance High specified avalanche capability High integration ECOPACK 2 compliant
Datasheet 100 V, 30 A power Schottky rectifier Features Very low conduction losses Low forward voltage drop Low thermal resistance High specified avalanche capability High integration ECOPACK 2 compliant
15ETL06PbF 15ETL06FPPbF
Ultra-low V F Hyperfast Rectifier for Discontinuous Mode PFC Features Benchmark Ultra-low Forward Voltage Drop Hyperfast Recovery Time Low Leakage Current 75 C Operating Junction Temperature Fully Isolated
Phase Control Thyristor Types N1588NC200 to N1588NC260
Date:- 2 August 212 Data Sheet Issue:- 2 Phase Control Thyristor Types N1588NC2 to N1588NC26 Absolute Maximum Ratings VOLTAGE RATINGS MAXIMUM LIMITS V DRM Repetitive peak off-state voltage, (note 1) 2-26
Phase Control Thyristor Types N1467NC200 to N1467NC260
Date:- 31 st July 2012 Data Sheet Issue:- 3 Phase Control Thyristor Types N1467NC200 to N1467NC260 Absolute Maximum Ratings VOLTAGE RATINGS MAXIMUM LIMITS V DRM Repetitive peak off-state voltage, (note
Automotive-grade 400 V internally clamped IGBT E SCIS 320 mj
STGB25N40LZAG, STGD25N40LZAG Datasheet Automotive-grade 400 V internally clamped IGBT E SCIS 320 mj Features TAB D 2 PAK 2 1 3 TAB 2 1 DPAK 3 AEC-Q101 qualified SCIS energy of 320 mj @ T J = 25 C Parts
TURBO 2 ULTRAFAST HIGH VOLTAGE RECTIFIER
STTH TURBO ULTRAFAST HIGH VOLTAGE RECTIFIER MAIN PRODUCT CHARACTERISTICS I F(AV) V RRM FEATURES AND BENEFITS Ultrafast switching Low reverse recovery current A V Tj (max) 7 C V F (max) trr (max). V ns
T..HFL SERIES 40 A 70 A 85 A. FAST RECOVERY DIODES T-Modules. Features. Description. Major Ratings and Characteristics. Bulletin I27107 rev.
Bulletin 277 rev. B 09/06 T..HFL SERES FAST REOVERY DODES T-Modules Features Fast recovery time characteristics Electrically isolated base plate V RMS isolating voltage Standard JEDE package Simplified
HFB20HJ20C. Ultrafast, Soft Recovery Diode. Features. Description. Absolute Maximum Ratings. 1 PD A V R = 200V I F(AV) = 20A
PD - 9469A HEXFRED TM Features Reduced RFI and EMI Reduced Snubbing Extensive Characterization of Recovery Parameters Hermetic Surface Mount Ultrafast, Soft Recovery Diode V R = 200V I F(AV) = 20A t rr
Asymmetric Gate turn-off Thyristor 5SGA 06D4502 PRELIMINARY
V DRM = 4500 V I TGQM = 600 A I TSM = 3 10 3 A V T0 = 1.9 V r T = 3.5 mω V Dclink = 2800 V Asymmetric Gate turn-off Thyristor 5SGA 06D4502 PRELIMINARY Patented free-floating silicon technology Low on-state
Phase Control Thyristor Types N3165HA260 and N3165HA280 Development Type No.: NX450HA260 and NX450HA280
Date:- 8 th December, 214 Data Sheet Issue:- A1 Phase Control Thyristor Types N3165HA26 and N3165HA28 Development Type No.: NX45HA26 and NX45HA28 Absolute Maximum Ratings VOLTAGE RATINGS MAXIMUM LIMITS
5SGS 08D4500 Old part no. TG
Old part no. TG 97-8-45 Gate Turn-off Thyristor Properties Key Parameters Full reverse voltage V DRM, V RRM = 4 5 V High reliability I TGQM = 8 A Suitable for drives and traction applications I TAVm =