Description. Symbol Value Unit SOT23-3L (P010xxL) I T(RMS) up to 0.8 A V DRM /V RRM up to 600 V. I GT From 5 to 200 µa

Size: px

Start display at page:

Download "Description. Symbol Value Unit SOT23-3L (P010xxL) I T(RMS) up to 0.8 A V DRM /V RRM up to 600 V. I GT From 5 to 200 µa"

Winfred Mills
6 years ago
Views:

1 P010XX Sensitive standard SCRs up to 0.8 Datasheet production data Description K G TO-92 (P010xx) G K K G SOT-223 (P0102xN) Thanks to highly sensitive triggering levels, the P010XX SCR series is suitable for all applications where available gate current is limited, such as ground fault circuit interrupters, pilot circuits in solid state relays, stand-by mode power supplies, smoke and alarm detectors. vailable in through-hole or surface mount packages, the voltage capability of this series has been upgraded since its introduction and is now available up to 600 V. G Table 1. Device summary K Symbol Value Unit SOT23-3L (P010xxL) I T(RMS) up to 0.8 V DRM /V RRM up to 600 V Features I GT From 5 to 200 µ On-state rms current, 0.8 Repetitive peak off-state voltage up to 600 V Triggering gate current from 5 to 200 µ ECOPCK 2 compliant component pril 2014 DocID15197 Rev 2 1/12 This is information on a product in full production.

2 Characteristics P010xx 1 Characteristics Table 2. bsolute ratings (limiting values) P010xx and P010xxN Symbol Parameter Value Unit I T(RMS) IT (V) I TSM On-state rms current (180 conduction angle) verage on-state current (180 conduction angle) Non repetitive surge peak on-state current TO-92 T l = 55 C SOT-223 T amb = 70 C 0.8 TO-92 T l = 55 C SOT-223 T amb = 70 C 0.5 t p = 8.3 ms 8 T j = 25 C t p = 10 ms 7 I ² t I ² t value for fusing t p = 10 ms T j = 25 C S di/dt Critical rate of rise of on-state current I G = 2 x I GT, t r 100 ns F = 60 Hz T j = 125 C 50 /µs I GM Peak gate current t p = 20 µs T j = 125 C 1 P G(V) verage gate power dissipation T j = 125 C 0.1 W T stg T j Storage junction temperature range Operating junction temperature range - 40 to to C Table 3. bsolute ratings (limiting values) P010xxL Symbol Parameter Value Unit I T(RMS) On-state rms current (180 conduction angle) T amb = 36 C 0.25 IT (V) verage on-state current (180 conduction angle) T amb = 36 C 0.16 I TSM Non repetitive surge peak on-state current t p = 8.3 ms 7 T j = 25 C t p = 10 ms 6 I ² t I ² t value for fusing t p = 10 ms T j = 25 C S di/dt Critical rate of rise of on-state current I G = 2 x I GT, t r 100 ns F = 60 Hz T j = 125 C 50 /µs I GM Peak gate current t p = 20 µs T j = 125 C 0.5 P G(V) verage gate power dissipation T j = 125 C 0.02 W T stg T j Storage junction temperature range Operating junction temperature range - 40 to to C 2/12 DocID15197 Rev 2

3 P010xx Characteristics Table 4. Electrical characteristics (1) P010xx and P010xxN Symbol Test conditions Value Unit I GT Max. 200 µ V D = 12 V, R L = 140 Ω V GT Max. 0.8 V V GD V D = V DRM, R L = 3.3 kω, R GK = 1 kω T j = 125 C Min. 0.1 V V RG I RG = 10 µ Min. 8 V I H I T = 50 m, R GK = 1 kω Max. 5 m I L I G = 1 m, R GK = 1 kω Max. 6 m dv/dt V D = 67% V DRM, R GK = 1 kω T j = 125 C Min. 75 V/µs V TM I TM = 1.6, tp = 380 µs T j = 25 C Max V V t0 Threshold voltage T j = 125 C Max V R d Dynamic resistance T j = 125 C Max. 600 mω V DRM = V RRM = 400 V R GK = 1 kω 1 I DRM T j = 25 C V Max. µ I DRM = V RRM = 600 V R GK = 1 kω 10 RRM V DRM = V RRM R GK = 1 kω T j = 125 C T j = 25 C, unless otherwise specified Table 5. Electrical characteristics (1) P010xxL Symbol Test conditions P0102xL P0109L Unit I GT Max µ V D = 12 V, R L = 140 Ω V GT Max. 0.8 V V GD V D = V DRM, R L = 3.3 kω, R GK = 1 kω T j = 125 C Min. 0.1 V V RG I RG = 10 µ Min. 8 V I H I T = 50 m, R GK = 1 kω Max. 6 m I L I G = 1 m, R GK = 1 kω Max. 7 m dv/dt V D = 67% V DRM, R GK = 1 kω T j = 125 C Min V/µs V TM I TM = 0.4, tp = 380 µs T j = 25 C Max. 1.7 V V t0 Threshold voltage T j = 125 C Max. 1.0 V R d Dynamic resistance T j = 125 C Max mω I DRM T j = 25 C 1 V I DRM = V RRM Max. RRM T j = 125 C 100 µ 1. T j = 25 C, unless otherwise specified DocID15197 Rev 2 3/12 12

4 Characteristics P010xx Table 6. Electrical device summary Order code Voltage 100 V 200 V 400 V 600 V Sensitivity Package Packing mode P X 200 µ TO-92 Bulk P0102 5L3 X 200 µ TO-92 Tape and reel 13 inch P0102L 54 X 200 µ SOT23-3L Tape and reel 7 inch P0102B 13 X 200 µ TO-92 Bulk P0102BL 54 X 200 µ SOT23-3L Tape and reel 7 inch P0102D 13 X 200 µ TO-92 Bulk P0102D 2L3 X 200 µ TO-92 mmopack P0102D 5L3 X 200 µ TO-92 Tape and reel 13 inch P0102DN 54 X X 200 µ SOT-223 Tape and reel 7 inch P0102M 13 X 200 µ TO-92 Bulk P0102MN 54 X 200 µ SOT-223 Tape and reel 7 inch P0109L 54 X 1 µ SOT23-3L Tape and reel 7 inch P0109D 13 X 1 µ TO-92 Bulk P0109D 5L3 X 1 µ TO-92 Tape and reel 13 inch Table 7. Thermal resistance Symbol Parameter Maximum Unit R th(j-a) Junction to case (DC) TO C/W R th(j-t) Junction to tab (DC) SOT C/W R th(j-a) R th(j-a) TO Junction to ambient (DC) C/W S (1) = 5 cm 2 SOT Junction to ambient (mounted on FR4 with recommended pad SOT23-3L 400 C/W layout) 1. S = Copper surface under tab. 4/12 DocID15197 Rev 2

5 P010xx Characteristics Figure 1. Maximum average power dissipation versus average on-state current P010xx and P010xxN Figure 2. Maximum average power dissipation versus average on-state current P010xxL P(W) α = I T(V) () α P(W) α = 180 I T(V) () α Figure 3. verage and DC on-state current versus lead temperature P010xx and P010xxN Figure 4. verage and DC on-state current versus ambient temperature P010xx and P010xxN I T(V) () D.C. (SOT-223) D.C. (TO-92) α = 180 (SOT-223) α = 180 (TO-92) T lead( C) I T(V) () D.C. (SOT-223) D.C. (TO-92) α = 180 (TO-92) α = 180 (SOT-223) T amb( C) Device mounted on FR4 with recomended pad layout for SOT DocID15197 Rev 2 5/12 12

6 Characteristics P010xx Figure 5. verage and DC on-state current versus case temperature P010xxL Figure 6. Relative variation of thermal impedance junction to ambient versus pulse duration 0.30 I T(V) () 1.00 K=[Z th(j-a) /Rth(j-a)] α = 180 D.C. SOT23-3L TO SOT T case( C) t p(s) E-2 1E-1 1E+0 1E+1 1E+2 5E+2 Figure 7. Gate trigger, holding, and latching currents with gate trigger voltage versus junction temperature Figure 8. Relative variation of holding current versus gate-cathode resistance IGT, VGT, IH, IL[Tj] /IGT, VGT, ih, il[tj=25 C] I H and IL (R GK =1 KΩ) V GT IGT T ( C) j Relative variations Typical values I H[R GK] / I H[ R GK =1k Ω] Typical values Tj = 25 C 2 R GK(k Ω) 0 1E-2 1E-1 1E+0 1E+1 Figure 9. Relative variation of dv/dt immunity versus gate-cathode resistance Figure 10. Relative variation of dv/dt immunity versus gate-cathode capacitance 10.0 dv/dt[r GK] / dv/dt[ R GK =1k Ω] Tj = 125 C V D = 0.67 x VDRM 10 8 dv/dt[c GK] / dv/dt[ R GK =1k Ω] V D = 0.67 x VDRM Tj = 125 C R GK = 1kΩ 1.0 Typical values 6 4 Typical values R GK(k Ω) C GK(nF) /12 DocID15197 Rev 2

7 P010xx Characteristics Figure 11. Surge peak on-state current versus number of cycles Figure 12. Non-repetitive surge peak on-state current and corresponding value of I²t I TSM() Repetitive T amb=25 C Non repetitive Tj initial=25 C t p=10ms One cycle 1 Number of cycles I TSM(), I t ( s) Tj initial = 25 C t p(ms) ITSM For a sinusoidal pulse with width tp < 10 ms I 2 t Figure 13. On-state characteristics P010xx, P010xxN Figure 14. On-state characteristics P010xxL 1E+1 I TM() Tj max.: V t0=0.95v R d=600mω 1E+1 I TM() Tj max.: V t0=1.0v R=1 d Ω 1E+0 Tj=max Maximum values 1E+0 Tj=max T j=25 C Maximum values T j=25 C 1E-1 1E-1 1E-2 V TM(V) E-2 V TM(V) Figure 15. Thermal resistance junction to ambient versus copper surface under tab P010xxN Figure 16. Thermal resistance junction to ambient versus copper surface under tab P010xxL R th(j-a) ( C/W) Epoxy printed circuit board FR4, copper thickness = 35 µm S(cm²) R th(j-a) ( C/W) Epoxy printed circuit board FR4, copper thickness = 35 µm S(cm²) DocID15197 Rev 2 7/12 12

8 Package information P010xx 2 Package information Epoxy meets UL94, V0 Lead-free package In order to meet environmental requirements, ST offers these devices in different grades of ECOPCK packages, depending on their level of environmental compliance. ECOPCK specifications, grade definitions and product status are available at: ECOPCK is an ST trademark. Table 8. TO-92 dimensions dimensions Ref Millimeters Inches a Min Typ Max Min Typ Max B C B C F D E D E F a Table 9. SOT-223 dimensions Ref. Millimeters Dimensions Inches V c Min. Typ. Max. Min. Typ. Max. 1 e1 D B1 B B B c H E D (1) e e e E (1) H V 10 max 1. Do not include mold flash or protrusions. Mold flash or protrusions shall not exceed 0.15mm (0.006inches) 8/12 DocID15197 Rev 2

9 P010xx Package information Figure 17. Footprint (dimensions in mm) Table 10. SOT23-3L dimensions Dimensions E Ref. Millimeters Inches Min. Max. Min. Max B e e1 D B c S 1 D e e H L c E H L 0.6 typ typ. S Figure 18. Footprint (dimensions in mm) DocID15197 Rev 2 9/12 12

10 Ordering information P010xx 3 Ordering information Figure 19. Ordering information scheme P 01 0x x x Blank xxx Sensitive SCR series Current 01 up to 0.8 Sensitivity 02 = 200 µ 09 = 1 µ Voltage = 100 V B = 200 V D = 400 V M = 600 V Package = TO-92 L = SOT23-3L N = SOT-223 Packing mode 13 = Bulk 2L3 = mmopack 5L3 = Tape and reel 13 inch 54 = Tape and reel 7 inch Table 11. Ordering information Order code Marking Package Weight Base qty Packing mode P P0102 TO g 2500 Bulk P0102 5L3 P0102 TO g 2000 Tape and reel 13 inch P0102L 54 P2 SOT23-3L 0.01 g 3000 Tape and reel 7 inch P0102B 13 P0102 B TO g 1000 Bulk P0102BL 54 P2B SOT23-3L 0.01 g 3000 Tape and reel 7 inch P0102D 13 P0102 D TO g 2500 Bulk P0102D 2L3 P0102 D TO g 2000 mmopack P0102D 5L3 P0102 D TO g 2000 Tape and reel 13 inch P0102DN 54 P2D SOT g 3000 Tape and reel 7 inch P0102M 13 P0102 M TO g 2500 Bulk P0102MN 54 P2M SOT g 2000 Tape and reel 7 inch P0109L 54 P9 SOT23-3L 0.01 g 3000 Tape and reel 7 inch P0109D 13 P0109 D TO g 2500 Bulk P0109D 5L3 P0109 D TO g 2000 Tape and reel 13 inch 10/12 DocID15197 Rev 2

11 P010xx Revision history 4 Revision history Table 12. Document revision history Date Revision Changes 24-Nov First issue. 01-pr dded V GT in Figure 7, updated Figure 11 and Table 9 and reformatted to current standard. DocID15197 Rev 2 11/12 12

12 P010xx Please Read Carefully: Information in this document is provided solely in connection with ST products. STMicroelectronics NV and its subsidiaries ( ST ) reserve the right to make changes, corrections, modifications or improvements, to this document, and the products and services described herein at any time, without notice. ll ST products are sold pursuant to ST s terms and conditions of sale. Purchasers are solely responsible for the choice, selection and use of the ST products and services described herein, and ST assumes no liability whatsoever relating to the choice, selection or use of the ST products and services described herein. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. If any part of this document refers to any third party products or services it shall not be deemed a license grant by ST for the use of such third party products or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoever of such third party products or services or any intellectual property contained therein. UNLESS OTHERWISE SET FORTH IN ST S TERMS ND CONDITIONS OF SLE ST DISCLIMS NY EXPRESS OR IMPLIED WRRNTY WITH RESPECT TO THE USE ND/OR SLE OF ST PRODUCTS INCLUDING WITHOUT LIMITTION IMPLIED WRRNTIES OF MERCHNTBILITY, FITNESS FOR PRTICULR PURPOSE (ND THEIR EQUIVLENTS UNDER THE LWS OF NY JURISDICTION), OR INFRINGEMENT OF NY PTENT, COPYRIGHT OR OTHER INTELLECTUL PROPERTY RIGHT. ST PRODUCTS RE NOT DESIGNED OR UTHORIZED FOR USE IN: () SFETY CRITICL PPLICTIONS SUCH S LIFE SUPPORTING, CTIVE IMPLNTED DEVICES OR SYSTEMS WITH PRODUCT FUNCTIONL SFETY REQUIREMENTS; (B) ERONUTIC PPLICTIONS; (C) UTOMOTIVE PPLICTIONS OR ENVIRONMENTS, ND/OR (D) EROSPCE PPLICTIONS OR ENVIRONMENTS. WHERE ST PRODUCTS RE NOT DESIGNED FOR SUCH USE, THE PURCHSER SHLL USE PRODUCTS T PURCHSER S SOLE RISK, EVEN IF ST HS BEEN INFORMED IN WRITING OF SUCH USGE, UNLESS PRODUCT IS EXPRESSLY DESIGNTED BY ST S BEING INTENDED FOR UTOMOTIVE, UTOMOTIVE SFETY OR MEDICL INDUSTRY DOMINS CCORDING TO ST PRODUCT DESIGN SPECIFICTIONS. PRODUCTS FORMLLY ESCC, QML OR JN QULIFIED RE DEEMED SUITBLE FOR USE IN EROSPCE BY THE CORRESPONDING GOVERNMENTL GENCY. Resale of ST products with provisions different from the statements and/or technical features set forth in this document shall immediately void any warranty granted by ST for the ST product or service described herein and shall not create or extend in any manner whatsoever, any liability of ST. ST and the ST logo are trademarks or registered trademarks of ST in various countries. Information in this document supersedes and replaces all information previously supplied. The ST logo is a registered trademark of STMicroelectronics. ll other names are the property of their respective owners STMicroelectronics - ll rights reserved STMicroelectronics group of companies ustralia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan - Malaysia - Malta - Morocco - Philippines - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States of merica 12/12 DocID15197 Rev 2

K G. Order code 400 V 600 V Min. Max. P0111MA 1AA3 X 4 µa 25 µa TO-92. P0111MN 5AA4 X 4 µa 25 µa SOT-223. P0115DA 5AL3 X 15 µa 50 µa TO-92

K G. Order code 400 V 600 V Min. Max. P0111MA 1AA3 X 4 µa 25 µa TO-92. P0111MN 5AA4 X 4 µa 25 µa SOT-223. P0115DA 5AL3 X 15 µa 50 µa TO-92 Sensitive high immunity SCRs up to.8 Features I T(RMS) up to.8 V DRM /V RRM and 6 V I GT from.5 to 5 µ G K Description Thanks to highly sensitive triggering levels, the P11xx SCR series is suitable for