MC74LVX157. Quad 2-Channel Multiplexer. With 5 V Tolerant Inputs

Transcription

1 MC7457 Quad 2-Channel Multiplexer With 5 Tolerant Inputs The MC7457 is an advanced high speed CMO quad 2channel multiplexer. The inputs tolerate voltages up to 7.0, allowing the interface of 5.0 systems to systems. It consists of four 2input digital multiplexers with common select () and enable () inputs. When is held igh, selection of data is inhibited and all the outputs go ow. The select decoding determines whether the I0 n or I n inputs get routed to the corresponding Z n outputs. Features igh peed: t PD = 5. ns (Typ) at CC = 3.3 ow Power Dissipation: I CC = 4 A (Max) at T A = 25 C Power Down Protection Provided on Inputs Balanced Propagation Delays ow Noise: OP = 0.5 (Max) Pin and Function Compatible with Other tandard ogic Families atchup Performance xceeds 300 ma D Performance: uman Body Model > 2000 ; Machine Model > 200 These Devices are PbFree and are Ro Compliant PIN NAM Pins I0n In TRUT TAB INPUT Function ource 0 Data Inputs ource Data Inputs nable Input elect Input Outputs I0n In OUTPUT = igh oltage evel; = ow oltage evel; = igh or ow oltage evel ; For I CC Reasons DO NOT FOAT Inputs 6 OIC6 D UFFI CA 75B TOP6 DT UFFI CA 948F MARKING DIAGRAM 57G AWYWW OIC6 PIN AIGNMNT CC I0c Ic Zc I0d Id Zd I0a Ia Za I0b Ib Zb GND 6ead (Top iew) ORDRING INFORMATION ee detailed ordering and shipping information in the package dimensions section on page 4 of this data sheet = pecific Device Code A = Assembly ocation W, = Wafer ot Y = Year WW, W = Work Week G or = PbFree Package (Note: Microdot may be in either location) 57 AYW 8 TOP6 emiconductor Components Industries, C, 204 August, 204 Rev. 4 Publication Order Number: MC7457/D

2 MC I0a 4 Ia 3 5 I0b 7 Ib 6 4 I0c 2 Ic 3 I0d 9 Id 0 Za Zb Zc Zd Figure. ogic Diagram MAIMUM RATING ymbol Parameter alue Unit CC DC upply oltage 0.5 to +7.0 in DC Input oltage 0.5 to +7.0 out DC Output oltage 0.5 to CC +0.5 I IK Input Diode Current 20 ma I OK Output Diode Current ±20 ma I out DC Output Current, per Pin ±25 ma I CC DC upply Current, CC and GND Pins ±50 ma P D Power Dissipation 80 mw T stg torage Temperature 65 to +50 C tresses exceeding those listed in the Maximum Ratings table may damage the device. If any of these limits are exceeded, device functionality should not be assumed, damage may occur and reliability may be affected. RCOMMNDD OPRATING CONDITION ymbol Parameter Min Max Unit CC DC upply oltage 3.6 in DC Input oltage out DC Output oltage 0 CC T A Operating Temperature, All Package Types C t/ Input Rise and Fall Time 0 00 ns/ Functional operation above the stresses listed in the Recommended Operating Ranges is not implied. xtended exposure to stresses beyond the Recommended Operating Ranges limits may affect device reliability. 2

3 MC7457 DC CTRICA CARACTRITIC ymbol Parameter Test Conditions CC I ighevel Input oltage 3.6 I owevel Input oltage 3.6 O O ighevel Output oltage ( in = I or I ) owevel Output oltage ( in = I or I ) I O = 50 A I O = 50 A I O = 4mA I O = 50 A I O = 50 A I O = 4mA T A = 25 C T A = 40 to 85 C Min Typ Max Min Max I in Input eakage Current in = 5.5 or GND 3.6 ±0. ±.0 A I CC Quiescent upply Current in = CC or GND A Product parametric performance is indicated in the lectrical Characteristics for the listed test conditions, unless otherwise noted. Product performance may not be indicated by the lectrical Characteristics if operated under different conditions. Î AC CTRICA CARACTRITIC (Input t r = t f = ns) ÎÎ T A = 25 C ÎÎ T A = 40 to 85 C ymbolî Parameter Î Test Conditions Min Typ Max Min Max Unit t P, Î Propagation Delay, Input to Î CC = 2.7 C = 5pFÎ t P Output C Î Î = 50pF ÎÎ ÎÎ ns CC = 3.3 ± 0.3 C = 5pF C = 50pF t P Î Î, Propagation Delay, to CC = 2.7 C = 5pF t P Î Î C = 50pF ns CC = 3.3 ± 0.3 C = 5pF C = 50pF Î t P, Propagation Delay, to t P Î Î CC = 2.7 C = 5pF C = 50pF ns CC = 3.3 ± 0.3 C = 5pFÎ C = 50pF ÎÎ t O Î OutputtoOutput kew (Note ) t Î CC = 2.7 C = 50pF.5.5 ns O CC = 3.3 ± C = 50pF Unit.5. kew is defined as the absolute value of the difference between the actual propagation delay for any two separate outputs of the same device. The specification applies to any outputs switching in the same direction, either IGtoOW (t O ) or OWtoIG (t O ); parameter guaranteed by design. Î CAPACITI CARACTRITIC ÎÎ T A = 25 C ÎÎ T A = 40 to 85 C ymbolî Parameter Min Typ Max Min Max Unit Cin Î Input Capacitance pf C PD Î Power Dissipation Capacitance (Note 2) 20 pf 2. C PD is defined as the value of the internal equivalent capacitance which is calculated from the operating current consumption without load. Average operating current can be obtained by the equation: I CC(OPR) = C PD CC f in + I CC / 4 (per bit). C PD is used to determine the noload dynamic power consumption; P D = C PD CC 2 f in + I CC CC. 3

4 MC7457 NOI CARACTRITIC (Input t r = t f = ns, C = 50pF, CC = 3.3, Measured in OIC Package) T A = 25 C ymbol Characteristic Typ Max Unit OP Quiet Output Maximum Dynamic O O Quiet Output Minimum Dynamic O ID Minimum igh evel Dynamic Input oltage ID Maximum ow evel Dynamic Input oltage In or 50% CC GND 50% CC GND t P t P t P t P 50% CC 50% CC Figure 2. Figure 3. TT POINT DIC UNDR TT OUTPUT C * *Includes all probe and jig capacitance Figure 4. Propagation Delay Test Circuit ORDRING INFORMATION Device Package hipping MC7457DR2G OIC6 (PbFree) 2500 Tape & Reel MC7457DTR2G TOP6 (PbFree) 2500 Tape & Reel For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging pecifications Brochure, BRD80/D. 4

5 MC7457 PACKAG DIMNION TOP6 CA 948F IU B 0.5 (0.006) T 0.5 (0.006) T 0.0 (0.004) T ATING PAN U PIN IDNT. U D 2 /2 C 6 K RF 0.0 (0.004) M T U K A G J K ÇÇÇ ÉÉÉ B CTION NN U J N 0.25 (0.00) M N F DTAI DTAI W NOT:. DIMNIONING AND TORANCING PR ANI Y4.5M, CONTROING DIMNION: MIIMTR. 3. DIMNION A DO NOT INCUD MOD FA. PROTRUION OR GAT BURR. MOD FA OR GAT BURR A NOT CD 0.5 (0.006) PR ID. 4. DIMNION B DO NOT INCUD INTRAD FA OR PROTRUION. INTRAD FA OR PROTRUION A NOT CD 0.25 (0.00) PR ID. 5. DIMNION K DO NOT INCUD DAMBAR PROTRUION. AOWAB DAMBAR PROTRUION A B 0.08 (0.003) TOTA IN C OF T K DIMNION AT MAIMUM MATRIA CONDITION. 6. TRMINA NUMBR AR OWN FOR RFRNC ONY. 7. DIMNION A AND B AR TO B DTRMIND AT DATUM PAN W. MIIMTR INC DIM MIN MA MIN MA A B C D F G 0.65 BC BC J J K K BC BC M ODRING FOOTPRINT* PITC DIMNION: MIIMTR *For additional information on our PbFree strategy and soldering details, please download the ON emiconductor oldering and Mounting Techniques Reference Manual, ODRRM/D. 5

6 MC7457 PACKAG DIMNION A B OIC6 CA 75B05 IU K P 8 P 0.25 (0.00) M B NOT:. DIMNIONING AND TORANCING PR ANI Y4.5M, CONTROING DIMNION: MIIMTR. 3. DIMNION A AND B DO NOT INCUD MOD PROTRUION. 4. MAIMUM MOD PROTRUION 0.5 (0.006) PR ID. 5. DIMNION D DO NOT INCUD DAMBAR PROTRUION. AOWAB DAMBAR PROTRUION A B 0.27 (0.005) TOTA IN C OF T D DIMNION AT MAIMUM MATRIA CONDITION. MIIMTR INC DIM MIN MA MIN MA A B C D F G.27 BC BC J K M P R T ATING PAN G D 6 P 0.25 (0.00) M T B A K C M R 45 J F ODRING FOOTPRINT* PITC 8 9 DIMNION: MIIMTR *For additional information on our PbFree strategy and soldering details, please download the ON emiconductor oldering and Mounting Techniques Reference Manual, ODRRM/D. ON emiconductor and the are registered trademarks of emiconductor Components Industries, C (CIC) or its subsidiaries in the United tates and/or other countries. CIC owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of CIC s product/patent coverage may be accessed at CIC reserves the right to make changes without further notice to any products herein. CIC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does CIC assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. Typical parameters which may be provided in CIC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including Typicals must be validated for each customer application by customer s technical experts. CIC does not convey any license under its patent rights nor the rights of others. CIC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the CIC product could create a situation where personal injury or death may occur. hould Buyer purchase or use CIC products for any such unintended or unauthorized application, Buyer shall indemnify and hold CIC and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that CIC was negligent regarding the design or manufacture of the part. CIC is an qual Opportunity/Affirmative Action mployer. This literature is subject to all applicable copyright laws and is not for resale in any manner. PUBICATION ORDRING INFORMATION ITRATUR FUFIMNT: iterature Distribution Center for ON emiconductor P.O. Box 563, Denver, Colorado 8027 UA Phone: or Toll Free UA/Canada Fax: or Toll Free UA/Canada mail: orderlit@onsemi.com N. American Technical upport: Toll Free UA/Canada urope, Middle ast and Africa Technical upport: Phone: Japan Customer Focus Center Phone: ON emiconductor Website: Order iterature: For additional information, please contact your local ales Representative MC7457/D