SGM Ω, High Speed, Low Voltage Analog Switch/Multiplexer
|
|
- MargaretMargaret Park
- 5 years ago
- Views:
Transcription
1 GENERL DESCRIPTION The SGM84782 is high-speed, low-voltage, low on-resistance, CMOS analog multiplexer/switch that configured as two 4-channel multiplexers. It operates from a single +1.8V to +4.2V power supply. Targeted applications include battery powered equipment that benefit from low R ON (4) and fast switching speeds (t ON = 17ns, t OFF = 9ns). The SGM84782 can handle rail-to-rail analog signals and is available in Green TQFN L and TSSOP-16 packages. PPLICTIONS Communication Systems Cell Phones Portable Instrumentation udio Signal Routing udio and Video Switching Computer Peripherals Low-Voltage Data-cquisition Systems FETURES Voltage Operation: 1.8V to 4.2V Low On-Resistance: 4 (TYP) at 4.2V Low On-Resistance Flatness -3d andwidth: 15MHz Fast Switching Times (+4.2V) t ON 17ns t OFF 9ns Low Crosstalk: -92d at 1MHz Rail-to-Rail Input and Output Operation Typical Power Consumption (<.1μW) TTL/CMOS Compatible reak-efore-make Switching Extended Industrial Temperature Range: -4 to +85 vailable in Green TQFN L and TSSOP-16 Packages PIN CONFIGURTIONS (TOP VIEW) Y2 Y V+ X ` Y 1 12 X1 FUNCTION TLE Y3 Y X X CONTROL INPUTS ENLE Select ON SWITCHES L L L X-X Y-Y L L H X-X1 Y-Y1 L H L X-X2 Y-Y2 L H H X-X3 Y-Y3 H ll Switches Open ENLE Y 1 Y2 2 Y 3 Y3 4 4 LOGIC N.C. TQFN L 9 X V+ X2 X1 X = Don t Care. Y1 ENLE X X3 N.C. 7 LOGIC TSSOP-16 REV.. 2
2 PCKGE/ORDERING INFORMTION MODEL SGM84782 PIN- PCKGE SPECIFIED TEMPERTURE RNGE ORDERING NUMER PCKGE MRKING PCKGE OPTION TQFN L -4 to +85 SGM84782YTQ16/TR Tape and Reel, 3 TSSOP-16-4 to +85 SGM84782YTS/TR SGM84782YTS Tape and Reel, 3 SOLUTE MXIMUM RTINGS to...v to 4.6V nalog, Digital voltage range V to ( ) +.3V Continuous Current NO, NC, or COM...±1m Operating Temperature Range...-4 to +85 Junction Temperature...15 Storage Temperature Range to +15 Lead Temperature (soldering, 1s)...26 ESD Susceptibility HM...4V MM...4V NOTE: Stresses beyond those listed under bsolute Maximum Ratings may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated in the operational sections of the specifications is not implied. Exposure to absolute maximum rating conditions for extended periods may affect device reliability. CUTION This integrated circuit can be damaged by ESD if you don t pay attention to ESD protection. SGMICRO recommends that all integrated circuits be handled with appropriate precautions. Failure to observe proper handling and installation procedures can cause damage. ESD damage can range from subtle performance degradation to complete device failure. Precision integrated circuits may be more susceptible to damage because very small parametric changes could cause the device not to meet its published specifications. SGMICRO reserves the right to make any change in circuit design, specification or other related things if necessary without notice at any time. Please contact SGMICRO sales office to get the latest datasheet. PIN DESCRIPTION PIN TSSOP-16 TQFN L NME FUNCTION 1, 5, 2, 4 15, 3, 16, 2 Y-Y3 nalog Switch Y Inputs Y-Y Y nalog Switch Y Output. 6 4 ENLE Digital Enable Input. Normally connect to. Drive to logic high to set all switches off. 7 5 N.C. Not Internally Connected. 8 6 Ground. 9 7 Digital ddress Input. 1 8 Digital ddress Input. 12, 14, 15, 11 1, 12, 13, 9 X-X3 nalog Switch X Inputs X-X X nalog Switch X Output Power Supply. Exposed Pad Exposed pad should be soldered to PC board and connected to. 2
3 ELECTRICL CHRCTERISTICS ( = +4.2V, = V, V IH = +1.6V, V IL = +.6V, T = -4 to +85. Typical values are at = +4.2V, T = +25, unless otherwise noted.) PRMETER SYMOL CONDITIONS TEMP MIN TYP MX UNITS NLOG SWITCH nalog Signal Range On-Resistance V X_, V Y_, V X, V Y R ON -4 to +85 V = 4.2V, I X_, I Y_ = -1m, V X, V Y = 1V, Test Circuit 1-4 to On-Resistance Match etween Channels R ON = 4.2V, I X_, I Y_ = -1m, V X, V Y = 1V, Test Circuit 1-4 to On-Resistance Flatness Source OFF Leakage Current Channel ON Leakage Current DIGITL INPUTS R FLT(ON) I X_(OFF), I Y_(OFF) I X_(ON), I Y_(ON), I X(ON), I Y(ON) = 4.2V, I X_, I Y_ = -1m, V X, V Y = 1V, 2.5V, Test Circuit 1-4 to = 4.2V, V X_, V Y_ = 3.3V,.3V, V X, V Y =.3V, 3.3V = 4.2V, V X, V Y =.3V, 3.3V, V X_, V Y_ =.3V, 3.3V or floating -4 to μ -4 to μ Input High Voltage V INH -4 to V Input Low Voltage V INL -4 to V Input Leakage Current I IN_ V, V = V ENLE = V or 4.2V -4 to μ DYNMIC CHRCTERISTICS Turn-On Time t ON V IN = 1.5V to.5v, V X or V Y = 2.1V Turn-Off Time R L= 5, C L = 35pF, Test Circuit ddress Transition Time reak-efore-make Time Delay t OFF t TRNS t D V IN = 4.2V to V, V X or V Y = 2.1V, R L = 5, C L = 35pF, Test Circuit 3 V IN = 4.2V to V, V X or V Y = 2.1V, R L = 5, C L = 35pF, Test Circuit 4 ns ns ns Charge Injection Q C L = 1nF, Test Circuit pc Off Isolation Channel-to-Channel Crosstalk -3d andwidth Channel ON Capacitance POWER REQUIREMENTS O ISO X TLK W C X_(ON), C Y_(ON), C X(ON), C Y(ON) Signal = dm, V IS = 2.1V, R L = 5, C L = 35pF, Test Circuit 6 Signal = dm, V IS = 2.1V, R L = 5, C L = 35pF, Test Circuit 6 Signal = dm, V IS = 2.1V, R L = 5, Test Circuit 6 1MHz MHz MHz MHz d d MHz pf Power Supply Range -4 to V Power Supply Current I + = 4.2V, V, V, V ENLE = 4.2V or V -4 to μ 3
4 ELECTRICL CHRCTERISTICS ( = +2.7V to +3.6V, = V, V IH = +1.6V, V IL = +.4V, T = -4 to +85. Typical values are at = +3.V, T = +25, unless otherwise noted.) PRMETER SYMOL CONDITIONS TEMP MIN TYP MX UNITS NLOG SWITCH nalog Signal Range V X_, V Y_, V X, V Y -4 to +85 V On-Resistance R ON = 2.7V, I X_, I Y_ = -1m, V X, V Y = 1V, Test Circuit 1-4 to On-Resistance Match etween Channels R ON = 2.7V, I X_, I Y_ = -1m, V X, V Y = 1V, Test Circuit 1-4 to On-Resistance Flatness R FLT(ON) = 2.7V, I X_, I Y_ = -1m, V X, V Y = 1V, 2.5V, Test Circuit 1-4 to Source OFF Leakage Current I X_(OFF), I Y_(OFF) = 3.6V, V X_, V Y_ = 3.3V,.3V, V X,V Y =.3V, 3.3V -4 to μ Channel ON Leakage Current DIGITL INPUTS I X_(ON), I Y_(ON), I X(ON), I Y(ON) = 3.6V, V X, V Y =.3V, 3.3V, V X_, V Y_ =.3V, 3.3V or floating -4 to μ Input High Voltage V INH -4 to V Input Low Voltage V INL -4 to V Input Leakage Current I IN_ V, V = V ENLE = V or 2.7V -4 to μ DYNMIC CHRCTERISTICS Turn-On Time t ON V IN = 1.5V to.5v, V X or V Y = 1.5V, Turn-Off Time R L = 5, C L = 35pF, Test Circuit ddress Transition Time reak-efore-make Time Delay t OFF t TRNS t D V IN = 1.5V to V, V X or V Y = 1.5V, R L = 5, C L = 35pF, Test Circuit 3 V IN = 1.5V to V, V X or V Y = 1.5V, R L = 5, C L = 35pF, Test Circuit 4 ns ns ns Charge Injection Q C L = 1nF, Test Circuit pc Off Isolation O ISO Signal = dm, V IS = 1.5V, 1MHz R L = 5, C L = 35pF, Test Circuit 6 1MHz d Channel-to-Channel Crosstalk X TLK Signal = dm, V IS = 1.5V, 1MHz R L = 5, C L = 35pF, Test Circuit 6 1MHz d -3d andwidth Channel ON Capacitance W C X_(ON), C Y_(ON), C X(ON), C Y(ON) Signal = dm, V IS = 1.5V, R L = 5, Test Circuit MHz pf 4
5 SGM84782 TYPICL PERFORMNCE CHRCTERISTICS On Response vs. Frequency On Response vs. Frequency On Response (d) = +4.2V T = +25 On Response (d) = +3V T = Frequency (MHz) Frequency (MHz) On Response (d) Response vs. Frequency OFF-ISOLTION CROSSTLK = +4.2V T = Frequency (MHz) On Response (d) Response vs. Frequency OFF-ISOLTION CROSSTLK = +3V T = Frequency (MHz) 5
6 TEST CIRCUITS 1m V1 X_ or Y_ V X_ or V Y_ R ON = V1/1m Test Circuit 1. On Resistance V ENLE ENLE X1,X2,X3, Y1,Y2,Y3 V ENLE V X V Y 5% 9% 9% 5 35pF t OFF t ON Test Circuit 2. Enable Switching Times (t ON, t OFF ) V,V ENLE X1,X2,X3, Y1,Y2,Y3 5 35pF V,V V X V Y 5% V X3 V Y3 t TRNS 1% 9% t TRNS Test Circuit 3. ddress Transition Times (t TRNS ) 6
7 TEST CIRCUITS (Cont.) V,V X-X3 V,V 5% Y-Y3 t R <5ns t F <5ns ENLE V X,V Y 9% 5 35pF t D Test Circuit 4. reak-efore-make Interval (t D) CHNNEL SELECT X_,Y_ V ENLE V ENLE ENLE C L 1pF Q =? C L Δ Test Circuit 5. Charge Injection (Q) CHNNEL SELECT 1nF X_,Y_ V IN NETWORK NLYZER 5 5 OFF-ISOLTION = 2log V IN ENLE MES. REF. 5 5 CROSSTLK = 2log VIN Test Circuit 6. -3d andwidth, Off-Isolation and Crosstalk 7
8 PCKGE OUTLINE DIMENSIONS TQFN L D e N16 L D1 N1 E E1 k b N5 TOP VIEW OTTOM VIEW SIDE VIEW RECOMMENDED LND PTTERN (Unit: mm) Dimensions In Millimeters Dimensions In Inches Symbol MIN MX MIN MX REF.8 REF D D E E k.2 MIN.8 MIN b e.5 TYP.2 TYP L
9 PCKGE OUTLINE DIMENSIONS TSSOP-16 D E1 E e b RECOMMENDED LND PTTERN (Unit: mm) L 1 2 θ H c Dimensions In Millimeters Dimensions In Inches Symbol MIN MX MIN MX b c D E E e.65 SC.26 SC L H.25 TYP.1 TYP θ
10 TPE ND REEL INFORMTION REEL DIMENSIONS TPE DIMENSIONS P2 P W Q1 Q2 Q1 Q2 Q1 Q2 Q3 Q4 Q3 Q4 Q3 Q4 Reel Diameter P1 K Reel Width (W1) DIRECTION OF FEED NOTE: The picture is only for reference. Please make the object as the standard. KEY PRMETER LIST OF TPE ND REEL Package Type Reel Diameter Reel Width W1 K P P1 P2 W Pin1 Quadrant TQFN L Q1 TSSOP Q1 1
11 CRTON OX DIMENSIONS NOTE: The picture is only for reference. Please make the object as the standard. KEY PRMETER LIST OF CRTON OX Reel Type Length Width Height Pizza/Carton
SGM Ω, High Speed, Low Voltage Analog Switch/Multiplexer
nalog Switch/Multiplexer GENERL DESCRIPTION The SGM84782 is high-speed, low-voltage, low on-resistance, CMOS analog multiplexer/switch that configured as two 4-channel multiplexers. It operates from a
More informationSGM Ω, High Speed, Low Voltage Analog Switch/Multiplexer
.5Ω, High Speed, Low Voltage nalog Switch/Multiplexer GENERL DESCRIPTION The SGM4782 is high-speed, low-voltage, low on-resistance, CMOS analog multiplexer/switch that configured as two 4-channel multiplexers.
More informationSGM48752 CMOS Analog Multiplexer
CMOS nalog Multiplexer GENERL DESCRIPTION The is a CMOS analog IC configured as two 4-channel multiplexers. This CMOS device can operate from 2.5V to 5.5V single supplies. Each switch can handle rail-to-rail
More informationSGM :1 CMOS Analog Signal Multiplexer
8:1 CMOS nalog Signal Multiplexer GENERL DESCRIPTION The is a CMOS analog IC configured as an 8-channel multiplexer. This CMOS device can operate from 2.5V to 5.5V single supplies. Each switch can handle
More informationSGM7SZ08 Small Logic Two-Input AND Gate
GENERL DESCRIPTION The is a single two-input ND gate from SGMICRO s Small Logic series. The device is fabricated with advanced CMOS technology to achieve ultra-high speed with high output drive while maintaining
More informationSGM7SZ32 Small Logic Two-Input OR Gate
Preliminary Datasheet GENERL DESCRIPTION The is a single two-input OR gate from SGMICRO's Small Logic series. The device is fabricated with advanced CMOS technology to achieve ultra-high speed with high
More informationSGM48753 CMOS Analog Switch
GENERAL DESCRIPTION The is a CMOS analog IC configured as three single-pole/double-throw (SPDT) switches. This CMOS device can operate from 2.5V to 5.5V single supplies. Each switch can handle rail-to-rail
More informationSGM7SZ00 Small Logic Two-Input NAND Gate
GENERAL DESCRIPTION The SGM7SZ00 is a single two-input NAND gate from SGMICRO s Small Logic series. The device is fabricated with advanced CMOS technology to achieve ultra-high speed with high output drive
More informationSGM8707 Micro-Power, CMOS Input, RRIO, 1.4V, Push-Pull Output Comparator
GENERAL DESCRIPTION The is an ultra low power comparator with a typical power supply current of 3nA. It has the best-in-class power supply current versus propagation delay performance. The propagation
More informationSGM7227 High Speed USB 2.0 (480Mbps) DPDT Analog Switch
GENERAL DECRIPTION The GM7227 is a high-speed, low-power double-pole/ double-throw (DPDT) analog switch that operates from a single 1.8V to 4.3V power supply. GM7227 is designed for the switching of high-speed
More informationSGM48000/1/2 High Speed, Dual Power MOSFET Drivers
SGM000// GENERAL DESCRIPTION The SGM000// ICs are matched dual-drivers. Unique circuit design provides very high speed drivers capable of delivering peak currents of A into highly capacitive loads. Improved
More informationSGM nA, Non-Unity Gain, Quad Rail-to-Rail Input/Output Operational Amplifier
PRODUCT DESCRIPTION The SGM8048 operates with a single supply voltage as low as 1.4V, while drawing less than 690nA (TYP) of quiescent current per amplifier. This device is also designed to support rail-to-rail
More informationSGM nA, Non-Unity Gain, Dual Rail-to-Rail Input/Output Operational Amplifier
PRODUCT DESCRIPTION The SGM8046 operates with a single supply voltage as low as 1.4V, while drawing less than 670nA (TYP) of quiescent current per amplifier. This device is also designed to support rail-to-rail
More informationSGM802 Low-Power, SC70/SOT µp Reset Circuit with Capacitor-Adjustable Reset Timeout Delay
Low-Power, SC70/SOT µp Reset Circuit with GENERAL DESCRIPTION The low-power micro-processor supervisor circuit monitors system voltages from 1.6V to 5V. This device performs a single function: it asserts
More informationSGM800 Low-Power, SOT µp Reset Circuit with Capacitor-Adjustable Reset Timeout Delay
GENERAL DESCRIPTION The low-power micro-processor supervisor circuit monitors system voltages from 1.6V to 5V. This device performs a single function: it asserts a reset signal whenever the V CC supply
More informationSGM nA, Single Rail-to-Rail I/O Operational Amplifier
GENERAL DESCRIPTION The SGM8041 is guaranteed to operate with a single supply voltage as low as 1.4V, while drawing less than 710nA (TYP) of quiescent current. This device is also designed to support rail-to-rail
More informationSGM nA, Dual Rail-to-Rail I/O Operational Amplifier
SGM842 67nA, Dual Rail-to-Rail I/O GENERAL DESCRIPTION The SGM842 is guaranteed to operate with a single supply voltage as low as 1.4V, while drawing less than 67nA (TYP) of quiescent current per amplifier.
More information2Ω, Quad, SPST, CMOS Analog Switches
9-73; Rev ; 4/ 2Ω, Quad, SPST, CMOS Analog Switches General Description The // quad analog switches feature.6ω max on-resistance (R ) when operating from a dual ±5V supply. R is matched between channels
More informationDATASHEET HI-390. Features. Ordering Information. Pinout Switch States shown for a Logic 1 Input. Applications. Functional Diagram
HI-39 Dual SPDT CMOS nalog Switch NOT RECOMMENDED FOR NEW DESIGNS NO RECOMMENDED REPLCEMENT contact our Technical Support Center at 1-888-INTERSIL or www.intersil.com/tsc DTSHEET FN7 Rev 1. ugust The Hl-39
More informationCMOS, +1.8 V to +5.5 V/ 2.5 V, 2.5 Low-Voltage, 8-/16-Channel Multiplexers ADG706/ADG707 REV. A
a FEATURES +.8 V to +. ingle Supply. V ual Supply. ON Resistance. ON Resistance Flatness pa Leakage Currents ns Switching Times Single -to- Multiplexer AG ifferential 8-to- Multiplexer AG 8-Lead TSSOP
More information10Ω, Quad, SPST, CMOS Analog Switches
-; Rev ; / Ω, Quad, SPST, MOS nalog Switches General Description Maxim s MX/MX/MX analog switches feature low on-resistance (Ω max) and.ω on-resistance matching between channels. These switches conduct
More informationLOW HIGH OFF ON. Maxim Integrated Products 1
9-79; Rev ; /07 Low-Voltage, Quad, SPST General Description The MAX0/MAX/MAX are quad, low-voltage, single-pole/single-throw (SPST) analog switches. On-resistance (00Ω, max) is matched between switches
More informationonlinecomponents.com
a FEATURES +.8 V to +. ingle Supply 2. V ual Supply 2. ON Resistance. ON Resistance Flatness pa Leakage Currents 4 ns Switching Times Single 6-to- Multiplexer AG76 ifferential 8-to- Multiplexer AG77 28-Lead
More informationMAX4638/MAX Ω, Single 8:1 and Dual 4:1, Low-Voltage Analog Multiplexers
General Description The / are single : and dual : CMOS analog multiplexers/demultiplexers (muxes/ demuxes). Each mux operates from a single +.V to +V supply or dual ±.V supplies. These devices feature.ω
More informationImproved, SPST/SPDT Analog Switches
9-0; Rev 2; 2/96 Improved, PT/PT nalog witches General escription Maxim s redesigned G7/G/G9 precision, CMO, monolithic analog switches now feature guaranteed on-resistance matching (3Ω max) between switches
More information1 pc Charge Injection, 100 pa Leakage CMOS 5 V/5 V/3 V 4-Channel Multiplexer ADG604
a FEATURES 1 pc Charge Injection (Over the Full Signal Range) 2.7 V to 5.5 V ual Supply 2.7 V to 5.5 ingle Supply Automotive Temperature Range: 4 C to +125 C 1 pa Max @ 25 C Leakage Currents 85 Typ On
More informationCOM COM GND MAX4644 OFF OFF
9-7; Rev ; / High-Speed, Low-Voltage, 4, General Description The is a single-pole/double-throw (SPDT) switch that operates from a single supply ranging from +.V to +.V. It provides low 4 on-resistance
More informationPrecision, 8-Channel/Dual 4-Channel, High-Performance, CMOS Analog Multiplexers
9-027; Rev 2; 8/02 Precision, 8-Channel/Dual 4-Channel, General Description The / precision, monolithic, CMOS analog multiplexers (muxes) offer low on-resistance (less than 0Ω), which is matched to within
More informationUNISONIC TECHNOLOGIES CO., LTD R070LD10
UNISONIC TECHNOLOGIES CO., LTD VOLTGE REGULTOR DESCRIPTION s the UTC linear integrated LDO, the UTC shows a high current, high accuracy, low-dropout voltage which built in on/off function. The features
More informationAOZ6115 High Performance, Low R ON, SPST Analog Switch
OZ6115 High Performance, Low R ON, PT nalog witch General Description The OZ6115 is a high performance single-pole single-throw (PT), low power, TTL-compatible bus switch. The OZ6115 can handle analog
More informationLow-Voltage Single SPDT Analog Switch
Low-Voltage Single SPDT Analog Switch DG22 DESCRIPTION The DG22 is a single-pole/double-throw monolithic CMOS analog switch designed for high performance switching of analog signals. Combining low power,
More informationPS381/PS383/PS385. Precision, 17V Analog Switches. Features. Applications. Functional Diagrams, Pin Configurations, and Truth Tables
79797979797979797979797979 Features Low On-Resistance (Ω typ) Minimizes Distortion and Error Voltages Low Glitching Reduces Step Errors in Sample-and-Holds. Charge Injection, pc typ Single Supply (+V to
More informationAOZ Ω Low-Voltage Dual SPDT Analog Switch. General Description. Features. Applications AOZ6236
0.35 Ω Low-Voltage Dual PDT nalog witch General Description The OZ6236 is a 0.35 Ω low-voltage Dual ingle Pole Double Throw (PDT) analog switch. The OZ6236 operates from a single 1.65 V to 4.3 V supply.
More informationPrecision, 16-Channel/Dual 8-Channel, Low-Voltage, CMOS Analog Multiplexers
/ Precision, 6-Channel/Dual 8-Channel, General Description The / low-voltage, CMOS analog multiplexers (muxes) offer low on-resistance (Ω max), which is matched to within 6Ω between switches and remains
More informationCMOS ±5 V/+5 V/+3 V Triple SPDT Switch ADG633
CMOS ±5 V/+5 V/+3 V Triple SPT Switch AG633 FEATURES ±2 V to ±6 V ual Supply 2 V to 12 ingle Supply Automotive Temperature Range 4 o C to +125 o C
More informationPowered-off Protection, 1, 1.8 V to 5.5 V, SPDT Analog Switch (2:1 Multiplexer)
DGE Powered-off Protection,,.8 V to 5.5 V, SPDT Analog Switch (: Multiplexer) DESCRIPTION The DGE is a high performance single-pole, double-throw (SPDT) analog switch designed for.8 V to 5.5 V operation
More informationLow Voltage 2-1 Mux, Level Translator ADG3232
Low Voltage 2-1 Mux, Level Translator ADG3232 FEATURES Operates from 1.65 V to 3.6 V Supply Rails Unidirectional Signal Path, Bidirectional Level Translation Tiny 8-Lead SOT-23 Package Short Circuit Protection
More informationPowered-off Protection, 6, 1.8 V to 5.5 V, SPDT Analog Switch (2:1 Multiplexer)
Powered-off Protection,, 1. V to 5.5 V, SPDT Analog Switch (:1 Multiplexer) DESCRIPTION The is a high performance single-pole, double-throw (SPDT) analog switch designed for 1. V to 5.5 V operation with
More informationLow-Leakage, CMOS Analog Multiplexers
/ General Description The / are monolithic, CMOS analog multiplexers (muxes). The 8-channel is designed to connect one of eight inputs to a common output by control of a 3-bit binary address. The dual,
More informationLow-Voltage Single SPDT Analog Switch
Low-Voltage Single SPDT Analog Switch DG22 DESCRIPTION The DG22 is a single-pole/double-throw monolithic CMOS analog switch designed for high performance switching of analog signals. Combining low power,
More informationQUICK REFERENCE DATA GND = 0 V; T amb =25 C; t r =t f = 6 ns. TYPICAL SYMBOL PARAMETER CONDITIONS 74HC00 74HCT00 UNIT
FETURES Complies with JEDEC standard no. 8-1 ESD protection: HBM EI/JESD22-114- exceeds 2000 V MM EI/JESD22-115- exceeds 200 V Specified from 40 to +85 C and 40 to +125 C. DESCRIPTION The 74HC00/74HCT00
More informationLNTA4001NT1G S-LNTA4001NT1G. Small Signal MOSFET 20 V, 238 ma, Single, N-Channel, Gate ESD Protection LESHAN RADIO COMPANY, LTD.
Small Signal MOSFET V, 38 ma, Single, N-Channel, Gate ESD Protection Features Low Gate Charge for Fast Switching Small.6 x.6 mm Footprint ESD Protected Gate Pb-Free Package is Available ESD Protected:V
More informationAOZ Ω Low-Voltage Dual-DPDT Analog Switch
0.3Ω Low-Voltage Dual-DPDT nalog witch General Description The OZ6274 is a dual Double-Pole, Double-Throw (DPDT) analog switch that is designed to operate from a single 1.65V to 4.3V supply. The OZ6274
More informationAOZ6135 High Performance, Low R ON, 1Ω SPDT Analog Switch
OZ6135 High Performance, Low R ON, 1Ω PDT nalog witch General Description The OZ6135 is a high performance single-pole double-throw (PDT), low power, TTL-compatible bus switch. The OZ6135 can handle analog
More information1 pc Charge Injection, 100 pa Leakage, CMOS 5 V/+5 V/+3 V Quad SPST Switches ADG611/ADG612/ADG613
a FEATURE 1 pc Charge Injection 2.7 V to 5.5 V ual upply +2.7 V to +5.5 V ingle upply Automotive Temperature Range 4 C to +125 C 1 pa Max @ 25 C Leakage Currents 85 On-Resistance Rail-to-Rail witching
More informationLC2 MOS 4-/8-Channel High Performance Analog Multiplexers ADG408/ADG409
a FEATURES 44 upply Maximum Ratings to Analog Signal Range Low On Resistance ( max) Low Power (I SUPPLY < 75 A) Fast Switching Break-Before-Make Switching Action Plug-in Replacement for G408/G409 APPLICATIONS
More informationPrecision 16-Channel/Dual 8-Channel CMOS Analog Multiplexers
G6B, G7B Precision 6-Channel/ual 8-Channel CMOS nalog Multiplexers ESCRIPTION The G6B and G7B are high performance analog multiplexers. Their ultra-low switch charge injection, low channel capacitance,
More information35Ω, Low-Voltage, SPST/SPDT Analog Switches in UCSP Package
19-1994; Rev 3; 2/3 35, Low-Voltage, SPST/SPDT General Description The low on-resistance (R ON ), low-voltage analog switches operate from a single +2.V to +5.5V supply. The / are single-pole/single-throw
More informationINTEGRATED CIRCUITS DATA SHEET. 74HC00; 74HCT00 Quad 2-input NAND gate. Product specification Supersedes data of 1997 Aug 26.
INTEGRTED CIRCUITS DT SHEET Quad 2-input NND gate Supersedes data of 1997 ug 26 2003 Jun 30 Quad 2-input NND gate FETURES Complies with JEDEC standard no. 8-1 ESD protection: HBM EI/JESD22-114- exceeds
More information2 Input NAND Gate L74VHC1G00
Input NAND Gate The is an advanced high speed CMOS input NAND gate fabricated with silicon gate CMOS technology. It achieves high speed operation similar to equivalent Bipolar Schottky TTL while maintaining
More informationQUICK REFERENCE DATA GND = 0 V; T amb =25 C; t r =t f = 6 ns. TYPICAL SYMBOL PARAMETER CONDITIONS 74HC00 74HCT00 UNIT
Quad 2-input NND gate FETURES Complies with JEDEC standard no. -1 ESD protection: HBM EI/JESD22-114- exceeds 2000 V MM EI/JESD22-115- exceeds 200 V Specified from 40 to +5 C and 40 to +125 C. DESCRIPTION
More informationPin Configurations/Functional Diagrams/Truth Tables IN V+ GND SOT23-6* MAX4544 ON OFF OFF ON SWITCHES SHOWN FOR "0" INPUT. Maxim Integrated Products 1
9-; Rev ; / Low-Voltage, Single-Supply General Description The are precision, dual analog switches designed to operate from a single +.7V to +V supply. Low power consumption (µw) makes these parts ideal
More informationImproved Quad CMOS Analog Switches
Improved Quad CMOS Analog Switches DG211B, DG212B DESCRIPTION The DG211B, DG212B analog switches are highly improved versions of the industry-standard DG211, DG212. These devices are fabricated in proprietary
More informationFeatures. Functional Diagrams, Pin Configurations, and Truth Tables
Features Low On-Resistance (Ω typ) Minimizes Distortion and Error Voltages Low Glitching Reduces Step Errors in Sample-and-Holds. Charge Injection, pc typ Single-Supply Operation (+.V to +1V) Improved
More informationNC7SB3157 TinyLogic Low Voltage UHS Analog Switch 2-Channel Multiplexer/Demultiplexer (Preliminary)
September 1999 Revised November 1999 TinyLogic Low Voltage UHS Analog Switch 2-Channel Multiplexer/Demultiplexer (Preliminary) General Description The is a high performance, Analog Switch 2- channel CMOS
More informationPin Configurations/Functional Diagrams/Truth Tables IN V+ GND SOT23-6* MAX4544 ON OFF OFF ON SWITCHES SHOWN FOR "0" INPUT. Maxim Integrated Products 1
9-; Rev ; / Low-Voltage, Single-Supply General Description The MAX MAX are precision, dual analog switches designed to operate from a single +.V to +V supply. Low power consumption (µw) makes these parts
More informationLogic Configuration Part Number Package Type Packing Method Quantity. IX4423N 8-Pin SOIC Tube 100 IX4423NTR 8-Pin SOIC Tape & Reel 2000
IX23-IX2-IX25 3-mpere Dual Low-Side Ultrafast MOSFET Drivers Features 3 Peak Output Current Wide Operating Voltage Range:.5V to 35V - C to +25 C Operating Temperature Range Latch-up Protected to 3 Fast
More informationMAX14753 V DD INA0 INA1 INA2 INA3 OUT INB0 INB1 INB2 INB3
19-4255; Rev 3; 7/10 8-Channel/Dual 4-Channel General Description The are 8-to-1 and dual 4-to-1 high-voltage analog multiplexers. Both devices feature 60Ω (typ) on-resistance with 0.03Ω (typ) on-resistance
More informationDescription. For Fairchild s definition of Eco Status, please visit:
FSA2357 Low R ON 3:1 Analog Switch Features 10µA Maximum I CCT Current Over an Expanded Control Voltage Range: V IN=2.6V, V CC=4.5V On Capacitance (C ON): 70pF Typical 0.55Ω Typical On Resistance (R ON)
More informationDLA LAND AND MARITIME COLUMBUS, OHIO TITLE MICROCIRCUIT, LINEAR, CMOS SPDT SWITCH, MONOLITHIC SILICON REVISIONS
REVISIONS LTR DESCRIPTION DTE PPROVED Prepared in accordance with SME Y14.24 Vendor item drawing REV PGE REV PGE REV STTUS OF PGES REV PGE 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 PMIC N/ PREPRED BY RICK OFFICER
More informationBCT4223 Low-Voltage, 0.4Ω Dual-SPDT Analog Switch
BCT4223 General Description The BCT4223 is a high-performance, dual single-pole double-throw (SPDT) analog switch. Specified over a wide operating power supply voltage range, 1.65V to 5.0V, Targeted applications
More information3.5Ω (max) at +3V PART. MAX4733EUA -40 C to +85 C 8 µmax MAX4732. Pin Configurations/Functional Diagrams/Truth Tables TOP VIEW (BUMPS ON BOTTOM) NC1
9-264; Rev 2 2/6 Ω, Dual SPST Analog Switches in UCSP General Description The MAX473// low-voltage, dual, single-pole/single-throw (SPST) analog switches operate from a single +2V to +V supply and handle
More informationMM74HC151 8-Channel Digital Multiplexer
8-Channel Digital Multiplexer General Description The MM74HC151 high speed Digital multiplexer utilizes advanced silicon-gate CMOS technology. Along with the high noise immunity and low power dissipation
More informationPrecision, Quad, SPST Analog Switches
9-022; Rev ; 4/94 Precision, Quad, SPST nalog Switches General escription The are precision, quad, single-pole single-throw (SPST) analog switches. The MX35 has four normally closed (N), and the MX352
More informationINTEGRATED CIRCUITS DATA SHEET. 74HC04; 74HCT04 Hex inverter. Product specification Supersedes data of 1993 Sep Jul 23
INTEGRTED CIRCUITS DT SHEET Supersedes data of 993 Sep 0 2003 Jul 23 FETURES Complies with JEDEC standard no. 8- ESD protection: HBM EI/JESD22-4- exceeds 2000 V MM EI/JESD22-5- exceeds 200 V. Specified
More information2-Line Low Capacitance, Bidirectional and Symmetrical (BiSy) ESD-Protection Diode - Flow Through Design
VBUS5M2-HT1 2-Line Low Capacitance, Bidirectional and Symmetrical (BiSy) ESD-Protection Diode - Flow Through Design 1 22814 3 MRKING (example only) Bar = cathode marking X = date code Y = type code (see
More informationMAX14760/MAX14762/MAX14764 Above- and Below-the-Rails Low-Leakage Analog Switches
19-652; Rev ; 9/11 EVALUATION KIT AVAILABLE MAX1476// General Description The MAX1476// analog switches are capable of passing bipolar signals that are beyond their supply rails. These devices operate
More informationLow-Voltage, 8-Channel/Dual 4-Channel Multiplexers with Latchable Inputs
9-396; Rev. ; 5/95 Low-Voltage, 8-Channel/Dual 4-Channel General Description The are low-voltage, CMOS, -of-8 and dual 4-channel muxes with latchable digital inputs. They feature low-voltage operation
More informationNTE74HC109 Integrated Circuit TTL High Speed CMOS, Dual J K Positive Edge Triggered Flip Flop w/set & Reset
NTE74HC109 Integrated Circuit TTL High Speed CMOS, Dual J K Positive Edge Triggered Flip Flop w/set & Reset Description: The NTE74HC109 is a dual J K flip flip with set and reset in a 16 Lead plastic DIP
More informationMAX4636EUB -40 C to +85 C 10 µmax 1 NO1 IN1 GND. 3 x 3 THIN QFN OFF ON ON OFF SWITCHES SHOWN FOR "0" INPUT. Maxim Integrated Products 1
9-79; Rev ; /3 Fast, Low-Voltage, Dual 4 SPDT General Description The are fast, dual 4 singlepole/double-throw (SPDT) analog switches that operate with supply voltages from +.8V to +.V. High switching
More informationINTEGRATED CIRCUITS. For a complete data sheet, please also download:
INTEGRTED CIRCUITS DT SHEET For a complete data sheet, please also download: The IC06 74HC/HCT/HCU/HCMOS Logic Family Specifications The IC06 74HC/HCT/HCU/HCMOS Logic Package Information The IC06 74HC/HCT/HCU/HCMOS
More informationHigh-Speed, Low-Voltage, CMOS Analog Multiplexers/Switches
9-52; Rev ; 7/99 igh-speed, ow-voltage, CMOS nalog General Description The are high-speed, lowvoltage, CMOS analog ICs configured as an 8-channel multiplexer (M467), two 4-channel multiplexers (M468),
More informationCD54/74AC153, CD54/74ACT153
CD4/74AC13, CD4/74ACT13 Data sheet acquired from Harris Semiconductor SCHS237A September 1998 - Revised May 2000 Dual 4-Input Multiplexer Features Description [ /Title (CD74 AC13, CD74 ACT1 3) /Subject
More informationEN: This Datasheet is presented by the m anufacturer. Please v isit our website for pricing and availability at ore.hu.
EN: This Datasheet is presented by the m anufacturer. Please v isit our website for pricing and availability at www.hest ore.hu. INTEGRTED CIRCUITS DT SHEET Supersedes data of 1990 Dec 01 2003 Jul 25 FETURES
More informationThe 74HC21 provide the 4-input AND function.
Rev. 03 12 November 2004 Product data sheet 1. General description 2. Features 3. Quick reference data The is a high-speed Si-gate CMOS device and is pin compatible with low-power Schottky TTL (LSTTL).
More information8-channel analog multiplexer/demultiplexer. For operation as a digital multiplexer/demultiplexer, V EE is connected to V SS (typically ground).
Rev. 04 12 January 2005 Product data sheet 1. General description 2. Features The is an with three address inputs (0 to 2), an active LOW enable input (E), eight independent inputs/outputs (Y0 to Y7) and
More informationPrecision, 16-Channel/Dual 8-Channel, High-Performance, CMOS Analog Multiplexers
9-27; Rev 3; 3/ Precision, 6-Channel/Dual 8-Channel, General Description The MA36/MA37 precision, monolithic, CMOS analog multiplexers (muxes) offer low on-resistance (less than Ω), which is matched to
More informationSmall Signal Schottky Diode FlipKY Gen 2
Small Signal Schottky Diode FlipKY Gen 2 MECHNICL DT Case: CLP0603-2M X FETURES Schottky diode for high-speed switching Very low dimensions: 0.6 mm x 0.3 mm x 0.29 mm 0.2 forward current Low forward voltage
More informationMM74HC157 Quad 2-Input Multiplexer
Quad 2-Input Multiplexer General Description The MM74HC157 high speed Quad 2-to-1 Line data selector/multiplexers utilizes advanced silicon-gate CMOS technology. It possesses the high noise immunity and
More informationCompact, Low Power Consumption, Triple SPDT (Triple 2:1 Multiplexers)
ompact, Low Power onsumption, Triple SPDT (Triple 2: Multiplexers) DG944 DESRIPTION The DG944 is a triple SPDT (triple 2: multiplexers) with enhanced performance on low power consumption, while guarantees.8
More informationVS-HFA08SD60SPbF. HEXFRED Ultrafast Soft Recovery Diode, 8 A. Vishay Semiconductors. FEATURES BENEFITS PRODUCT SUMMARY
HEXFRED Ultrafast Soft Recovery Diode, 8 2, 4 FETURES Ultrafast recovery time Ultrasoft recovery Very low I RRM 3 TO-252 (D-PK) N/C node PRODUCT SUMMRY Package TO-252 (D-PK) I F(V) 8 V R 600 V V F at I
More information8-Ch/Dual 4-Ch High-Performance CMOS Analog Multiplexers
8-Ch/ual 4-Ch High-Performance CMOS Analog Multiplexers Low On-Resistance r S(on) : Low Charge Injection Q: pc Fast Transition Time t TRANS : 6 ns Low Power I SUPPLY : A Single Supply Capability 44-V Supply
More informationFSUSB31 Low-Power 1-Port Hi-Speed USB 2.0 (480Mbps) Switch
Low-Power 1-Port Hi-Speed USB 2.0 (480Mbps) Switch Features Low On capacitance, 3.7pF (typical) Low On resistance, 6.5Ω (typical) Low power consumption (1µA maximum) 10µA maximum I CCT over and expanded
More informationINTEGRATED CIRCUITS. For a complete data sheet, please also download: The IC06 74HC/HCT/HCU/HCMOS Logic Family Specifications
INTEGRTED CIRCUITS DT SHEET For a complete data sheet, please also download: The IC06 74HC/HCT/HCU/HCMOS Logic Family Specifications Dual D-type flip-flop with set and reset; Supersedes data of September
More informationDPDT CMOS Analog Switch
DPDT CMOS nalog Switch HI-5046/883 This CMOS analog switch offers low-resistance switching performance for analog voltages up to the supply rails and for signal currents up to 70m. ON resistance is low
More informationRP mA, Ultra-Low Noise, Ultra-Fast CMOS LDO Regulator. General Description. Features. Applications. Ordering Information. Marking Information
RP122 3mA, Ultra-Low Noise, Ultra-Fast CMOS LDO Regulator General Description The RP122 is designed for portable RF and wireless applications with demanding performance and space requirements. The RP122
More informationCD54/74HC151, CD54/74HCT151
CD54/74HC151, CD54/74HCT151 Data sheet acquired from Harris Semiconductor SCHS150A September 1997 - Revised May 2000 High Speed CMOS Logic 8-Input Multiplexer [ /Title (CD74H C151, CD74H CT151) /Subject
More informationMM74C150 MM82C19 16-Line to 1-Line Multiplexer 3-STATE 16-Line to 1-Line Multiplexer
MM74C150 MM82C19 16-Line to 1-Line Multiplexer 3-STATE 16-Line to 1-Line Multiplexer General Description The MM74C150 and MM82C19 multiplex 16 digital lines to 1 output. A 4-bit address code determines
More informationCase Outline(s). The case outlines shall be designated in Mil-Std-1835 and as follows:
+SCOPE: TTL COMPATIBLE CMOS ANALOG SWITCHES Device Type Generic Number 0 DG300A(x)/883B 02 DG30A(x)/883B 03 DG302A(x)/883B 04 DG303A(x)/883B Case Outline(s). The case outlines shall be designated in Mil-Std-835
More information8-Channel, Dual 4-Channel, Triple 2-Channel Multiplexers
8-hannel, Dual 4-hannel, Triple 2-hannel Multiplexers DESRIPTION The DG92, DG922, and DG923 are high precision single and dual supply MOS analog multiplexers. DG92 is an 8-channel multiplexer, the DG922
More informationTemperature range Name Description Version XC7SET32GW 40 C to +125 C TSSOP5 plastic thin shrink small outline package; 5 leads; body width 1.
Rev. 01 3 September 2009 Product data sheet 1. General description 2. Features 3. Ordering information is a high-speed Si-gate CMOS device. It provides a 2-input OR function. Symmetrical output impedance
More information74AUP1G95 TinyLogic Low Power Universal Configurable Two-Input Logic Gate (Open Drain Output)
74UPG9 TinyLogic Low Power Universal onfigurable Two-Input Logic Gate (Open Drain Output) Features 0.8 V to.6 V V Supply Operation.6 V Over-Voltage Tolerant I/Os at V from 0.8V to.6 V Extremely High Speed
More informationUNISONIC TECHNOLOGIES CO., LTD U74HC14
UNISONIC TECHNOLOGIES CO., LTD U74HC14 HIGH-SPEED CMOS LOGIC HEX INVERTING SCHMITT TRIGGER DESCRIPTION The UTC U74HC14 each contain six inverting Schmitt triggers in one package. Each of them perform the
More informationPrecision 16-Channel/Dual 8-Channel CMOS Analog Multiplexers
G6B, G7B Precision 6-Channel/ual 8-Channel CMOS nalog Multiplexers ESCRIPTION The G6B and G7B are high performance analog multiplexers. Their ultra-low switch charge injection, low channel capacitance,
More informationPrecision, Quad, SPDT, CMOS Analog Switch
19-0189; Rev 1; 6/99 Precision, Quad, SPDT, MOS Analog Switch General Description The is a precision, quad, single-pole doublethrow (SPDT) analog switch. The four independent switches operate with bipolar
More informationAG726/AG732 SPECIFICATIONS ( = V %, = V, GN = V, unless otherwise noted.) B Version 4 C Parameter +2 C to +8 C Unit Test Conditions/Comments ANALOG SW
a FEATURES.8 V to. ingle Supply 2. V ual-supply Operation 4 On Resistance. On Resistance Flatness 48-Lead TQFP or 48-Lead 7 mm 7 mm CSP Packages Rail-to-Rail Operation 3 ns Switching Times Single 32-to-
More informationDG211. Features. SPST 4-Channel Analog Switch. Part Number Information. Functional Block Diagrams. Pinout. Data Sheet December 21, 2005 FN3118.
Data Sheet FN3118.4 SPST 4-Channel Analog Switch The is a low cost, CMOS monolithic, Quad SPST analog switch. It can be used in general purpose switching applications for communications, instrumentation,
More information2-input EXCLUSIVE-OR gate
Rev. 01 7 September 2009 Product data sheet 1. General description 2. Features 3. Ordering information is a high-speed Si-gate CMOS device. It provides a 2-input EXCLUSIVE-OR function. Symmetrical output
More informationINTEGRATED CIRCUITS. 74LVC138A 3-to-8 line decoder/demultiplexer; inverting. Product specification 1998 Apr 28
INTEGRATED CIRCUITS -to-8 line decoder/demultiplexer; inverting 998 Apr 8 FEATURES Wide supply voltage range of. to. V In accordance with JEDEC standard no. 8-A Inputs accept voltages up to. V CMOS lower
More informationThe 74LV32 provides a quad 2-input OR function.
Rev. 03 9 November 2007 Product data sheet. General description 2. Features 3. Ordering information The is a low-voltage Si-gate CMOS device that is pin and function compatible with 74HC32 and 74HCT32.
More information