AM7000 Series GENERAL FEATURES METAL TUBE VARIABLE AREA FLOWMETER

Transcription

1 MET TUBE VRIBE RE FOWMETER M000 Series GENER The metal tube variable area flowmeter M000 Series has been developed from M-0 Series which were based on the long time experience of TOKYO KEISO in the field of flow measurement. In addition to highly reliable local indicators, a variety of outputs are equipped to meet the requirements. Standard metallic materials and full line-up of lined materials cover almost all fluids even they are very corrosive. M000 covers liquids, gases and steam measurement applications in various industrial fields. FETURES FU INE-UP TO MEET POSSIBE REQUIREMENTS!! ll the necessary functions required for variable area flowmeter, i.e. local indication, electric transmitters, local flow integration PROFIBUS P & HRT communication, integrator with scaled pulse output and alarm are now available from one line. COMPCT DESIGN Smaller and lighter To suit modern needs. WIDE PRESSURE RNGE 0 lbs and 00 lbs rating are available as standard and higher pressure versions are also available as option. WIDE RNGE OF MTERI SEECTION ll possible metallic materials and a wide variety of lining materials are available even for corrosive fluids. HRT COMMUNICTION PROTOCO ND PROFIBUS P CN BE CONNECTED. CORRESPONDING TO EXPOSION-PROOF CONSTRUCTION Certification: TIIS, KOSH, NEPSI, TEX & IECEx DUST TIGHT ND WTER IMMERSION PROOF IP

2 M000 Series MET TUBE VRIBE RE FOWMETER MODE CODE TOKYO KEISO CO., TD. TG-F0-E

3 M000 Series MET TUBE VRIBE RE FOWMETER STNDRD SPECIFICTION FUNCTIONS M M /E M /H M /P M /T M /R, /N, /M ocal indication ocal indication Electric transmitter ocal indication Electric transmitter HRT communication ocal indication PROFIBUS P ocal indication Electric transmitter ocal integration Pulse output larm output ocal indication larm output METER SIZE to 0 (Please refer to M Series for more than 00) MTERI Carbon steel,,,, Rubber lining, Fluorocarbon resin lining, PVC lining and Glass lining On request Other metallic material PRESSURE RTING 0lbs (0K) class, 00lbs (0K) class On request Consult factory for higher pressure. Only 0lbs (0K) class is available for full jacketed flow meters (M /JF) and lining material flow meters. FUID PRESSURE General purpose Medium purpose 00lbs (0K) class 0lbs (0K) class Fluid Temp. ( C) up to 0 up to 0 up to 00 up to 0 up to 0 up to 00 up to 0 up to 00 Max. fluid press. (MPa) ining type Refer to Page.0 Consult factory for the specifications of higher pressure model. CONNECTION Flange connection [On request Screw connection (Consult factory)] General purpose Medium purpose Higher purpose JIS 0K FF JIS 0K RF NSI, JPI, DIN Other type are available Consult factory Only RF (Raised faced) flange is available for glass, PVC and fluorocarbon resin lined flow meters. Only FF (Flat faced) flange is available for rubber lined flow meters. TG-F0-E TOKYO KEISO CO., TD.

4 M000 Series MET TUBE VRIBE RE FOWMETER FUID TEMPERTURE (a) Metallic material M M M M /DU M /FB M /FB (Fluid : Gases) M /FB M /FB (Fluid : iquids) Operating temperature range of fluid 0 to 00 C * * 0 to C * 0 to C to 0 C 0 to 00 C * 0 to 00 C * * tes : The flowmeters out of the above temperature range may be available on your request. Consult TOKYO KEISO Co., td. for details. * vailable up to 0 C as an option. * very low temperature version is also available as an option. * Select M /FB or M /FB when temperature of gas service is lower than 0 C, or 0 C or higher. Select M /FB or M /FB when temperature of liquid service is 0 C or higher. vailable as low as 0 C as an option for lower than 0 C liquid service. * The Max. fluid temperature of ordinary type 0 lbs class is 00 C. (b) ining material Rubber lining Fluorocarbon resin lining PVC lining Glass lining 0 to 0 C 0 to 0 C 0 to 0 C 0 to 0 C * * Max. 0 C for fluorocarbon resin float INDICTION CCURCY ±. F.S. (On request ±.0 F.S., Consult factory) ±% F.S. for resin material float version STNDRD SCE ENGTH 0mm RNGEBIITY 0: (0: for the slurry type) INDICTOR CONSTRUCTION Dust tight and water immersion proof IP PINTING COOR PINTING Measuring tube (Carbon steel), body cover Transmitter Cooling fin Jade green ight gray Metallic silver COOR (Munsell.BG/.) (Munsell N.) M (OC INDICTION) MBIENT TEMPERTURE 0 to 0 C Dimension of indicator 0 pprox. mass:.kg 0 TOKYO KEISO CO., TD. TG-F0-E

5 M000 Series MET TUBE VRIBE RE FOWMETER M /E (OC INDICTOR WITH EECTRIC TRNSMITTER) M /E indicates flow rate by pointer and scale plate, and outputs electric ( to 0m DC) signal which is proportional to flow rate. In addition to the dust tight and water immersion proof type, the intrinsically safe and flame proof versions are available. SPECIFICTION OF TRNSMITTER Power supply voltage : 0 to 0V DC Voltage between transmitter terminals (For Intrinsically safe version : 0 to V DC/For TIIS Flameproof version: to 0 VDC) Current output : to 0m DC Effective output range :.0 to.m t abnormal condition, however,.m or.m as an option can be output. llowable load resistance : ess than 0Ω (0Ω or less / V DC) Determine the allowable load resistance for each supply voltage using following formula. llowable load resistance (Power supply voltage [V] 0 ) / 0.0 [Ω] The allowable load resistance includes the one of circuit wiring. Output accuracy : ±.0%F.S. (gainst flow calibration) ow cut off : 0 to 0%F.S. (default %F.S.) Damping : 0 to 0s (default s) : Weather proof M0., G/, NPT/, Weather proof connector : Intrinsically safe & Flame proof M0., -G/, NPT/, Packing type cable gland te : The packing type cable gland model SXC -BY made by Shimada Electric Co. shall be used for the TIIS flame proof construction. The cable entry for the indicator is G/ only. Construction : Dust tight and water immersion proof IP : Intrinsically safe Ex ia IIC T to T M /E/ I The temperature class of TIIS certified products is T. : Flame proof Ex d IIC T to T M /E/ E The temperature class of TIIS certified products is T, and that of KOSH certified products is T...T. mbient temp. : Dust tight and water immersion proof 0 to 0 C : Intrinsically safe 0 to 0 C : Flame proof 0 to C (For TIIS Certified products) 0 to 0 C (For other certified products) Insulation resistance : 0 MΩ or more / 00V DC (between batch of power supply terminal and indicator case) Withstand voltage : 00V C/min (between batch of power supply terminal and indicator case) DIMENSION OF INDICTOR / TRNSMITTER pprox. mass:.kg TERMIN ND WIRING Power supply + oad resistance E TG-F0-E TOKYO KEISO CO., TD.

6 M000 Series MET TUBE VRIBE RE FOWMETER M /H (OC INDICTOR WITH EECTRIC TRNSMITTER & HRT COMMUNICTION) M /H indicates flow rate by pointer and scale plate, and outputs electric ( to 0m DC) signal equipped with HRT Communication complying with Multi-drop. In addition to the dust tight and water immersion proof type, the intrinsically safe and flame proof versions are available. SPECIFICTION OF TRNSMITTER Power supply voltage : 0 to 0V DC Voltage between transmitter terminals (For Intrinsically safe version: 0 to V DC/For TIIS Flameproof version: to 0 VDC) Current output : to 0m DC Effective output range :.0 to.m t abnormal condition, however,.m or.m as an option can be output. llowable load resistance : 0 to 0Ω (t less than 0Ω load resistance is needed for with HRT communication. ) Determine the allowable load resistance for each supply voltage using following formula. llowable load resistance (Power supply voltage [V] 0) / 0.0 [Ω] The allowable load resistance includes the one of circuit wiring. Output accuracy : ±.0%F.S. (gainst flow calibration) ow cut off : 0 to 0%F.S. (default % F.S.) Damping : 0 to 0s (default s) : Weather proof M0., G/, NPT/, Weather proof connector : Intrinsically safe & Flame proof M0., G/, NPT/, Packing type cable gland te : The packing type cable gland model SXC -BY made by Shimada Electric Co. shall be used for the TIIS flame proof construction. The cable entry for the indicator is G/ only. Construction : Dust tight and water immersion proof IP : Intrinsically safe Ex ia IIC T to T M /H/ I The temperature class of TIIS certified products is T. : Flame proof Ex d IIT to T M /H/ E The temperature class of TIIS certified products is T, and that of KOSH certified products is T...T. mbient temp. : Dust tight and water immersion proof 0 to 0 C : Intrinsically safe 0 to 0 C : Flame proof 0 to C (For TIIS Certified products) 0 to 0 C (For other certified products) Insulation resistance Withstand voltage : 0 MΩ or more/00v DC (between batch of power supply terminal and indicator case) : 00V C/min (between batch of power supply terminal and indicator case) DIMENSION OF INDICTOR / TRNSMITTER pprox. mass:.kg TERMIN ND WIRING Power supply oad resistance + E TOKYO KEISO CO., TD. TG-F0-E

7 M000 Series MET TUBE VRIBE RE FOWMETER M /P (OC INDICTOR WITH -WIRE PROFIBUS P COMMUNICTION) M /P indicates flow rate by pointer and scale plate, and PROFIBUS P Communication for process automation. In addition to the dust tight and water immersion proof type, the intrinsically safe and flame proof versions are available. SPECIFICTION OF TRNSMITTER Power supply voltage : Bus power supply 0 to V DC However, the power supply for the intrinsically safe circuit with the safety barrier, and with FISCO system is 0 to V DC, and 0 to.v DC respectively. BUS Communication Base current : less than m In/output signal : Manchester-coded Bus Powered (IEC -) Communication protocol : PROFIBUS DP-V Device profile : PROFIBUS P Profile V.0 Function block : nalog Input for volume (or mass) flow rate Totalizer for volume (or mass) flow counter Output accuracy : ±.0% F.S. (gainst flow calibration) : Weather proof M0., G/, NPT/, Weather proof connector : Intrinsically safe & Flame proof M0., G/, NPT/, Packing type cable gland te : The packing type cable gland model SXC -BY made by Shimada Electric Co. shall be used for the TIIS flame proof construction. The cable entry for the indicator is G/ only. Construction : Dust tight and water immersion proof IP : Intrinsically safe Ex ia IIC T to T M /P/ I : Flame proof Ex d IIC T to T M /P/ E The temperature class of TIIS certified products is T, and that of KOSH certified products is T...T. mbient temp. : Dust tight and water immersion proof 0 to 0 C : Intrinsically safe 0 to 0 C : Flame proof 0 to C (For TIIS certified products) 0 to 0 C (For other certified products) Insulation resistance : 0 MΩ or more/00v DC (between batch of power supply terminal and indicator case) Withstand voltage : 00V C/min (between batch of power supply terminal and indicator case) DIMENSION OF INDICTOR / TRNSMITTER pprox. mass:.kg TERMIN ND WIRING DP/P Coupler or DP/P ink + E TG-F0-E TOKYO KEISO CO., TD.

8 M000 Series MET TUBE VRIBE RE FOWMETER M /T (OC INDICTOR WITH OC INTEGRTION, INTEGRTION PUSE, EECTRIC TRNSMISSION ND HRT COMMUNICTION) With local flow rate indication, M /T has the functions of local flow integration, integration pulse output, to 0m electric output and Hart communication. This series serves the custody of flow. The additional magnetic sensing switches to conventional push buttons are available for customers' convenience. In addition to the dust tight and water immersion proof type, the flame proof version is available. SPECIFICTION OF TRNSMITTER Integration : digit red CD (With digit scaling and reset function) Count rate : ess than 0Hz (ess than 000 c/h) Pulse or larm output : NPN Open collector point select output (Pulse width : 0ms, 0ms, ms, 00ms, 00ms) : point alarm + pulse output, or points alarm output (larms are selectable from the flow rate or the integrated flow alarm.) : Max. voltage 0V DC, max. current 0m (The power supply circuit and the output circuit are insulated.) Reverse-connected protection, Residual voltage when turning it on more less.v (0m) Integration accuracy : ±.0%F.S. (gainst flow calibration) Power supply : to 0V DC Voltage between transmitter terminals Current consumption : ess than 0m Current output : to 0m DC Effective output range :.0 to.m t abnormal condition, however,.m or.m as an option can be output. llowable load resistance : ess than 0Ω (In case of HRT communication version : 0 to 0Ω) Determine the allowable load resistance for each supply voltage using following formula. llowable load resistance (Power supply voltage [V] 0) / 0.0 [Ω] The allowable load resistance includes the one of circuit wiring. Output accuracy : ±.0%F.S.(gainst flow calibration) ow cut off : 0 to 0%F.S. (default %F.S.) Damping : 0 to 0s (default s) : G/, NPT/, Packing type cable gland te : The packing type cable gland model SXC -BY made by Shimada Electric Co. shall be used for the TIIS flame proof construction. The cable entry for the indicator is G/ only. Construction : Dust tight and water immersion proof IP : Flame proof Ex d IIC T to T M /T / E The temperature class of TIIS certified products is T, and that of KOSH certified products is T...T. mbient temp. : Dust tight and water immersion proof 0 to 0 C : Flame proof 0 to C (For TIIS Certified products) 0 to 0 C (For other Certified products) Insulation resistance : 0 MΩ or more/00v DC (between batch of power supply terminal and indicator case) Withstand voltage : 00V C/min (between batch of power supply terminal and indicator case) DIMENSION OF INDICTOR/TRNSMITTER pprox. mass:.kg TERMIN ND WIRING 0 Terminal. Terminal wiring DO+ DO DO+ DO R+ R PS+ PS 0 FG (ttention) DO: Contact output terminals, R: 0m analog output terminals, PS: Power supply, FG: Grounding TOKYO KEISO CO., TD. TG-F0-E

9 M000 Series MET TUBE VRIBE RE FOWMETER M /R (OC INDICTOR WITH REED SWITCH TYPE RM) M /R indicates flow rate by pointer and outputs SPST contact at set point for flow alarm. In addition to the dust tight and water immersion proof type, the intrinsically safe version is available. SPECIFICTION OF TRNSMITTER larm point Switch : points ( point high alarm, point low alarm or points high and low alarm) : Self-holding reed switch (a or b contact) Rating : Reed switch (SPST) 0V C, 0W DC as resistance load Max. V C/0., Max. V DC/0. Setting accuracy : ±.% F.S. (gainst flow calibration) te: While switch is on, and if any other flow rate than the alarm setting value is indicated, it may result in causing wrong accuracy. Reset span Enclosure : ess than 0% F.S. (gainst flow calibration) : G/ or NPT/ or others : Dust tight and water immersion proof IP mbient temp. : 0 to 0 C : Intrinsically safe Ex ia IIC T...T (TIIS certified products are subject to the safety barrier. The temperature class of KOSH certified products is T...T. See Page for details.) Insulation resistance Withstand voltage : MΩ or more/00v DC (between batch of power supply terminal and indicator case) : 00V C/min (between batch of power supply terminal and indicator case) DIMENSION OF INDICTOR / TRNSMITTER () () pprox. mass:.kg TERMIN ND WIRING High alarm ow alarm Terminal. High alarm Terminal. ow alarm Wiring of high alarm Wiring of low alarm te : Terminal. and are not used for point high alarm. ikewise, terminal. and are not used for point low alarm. TG-F0-E TOKYO KEISO CO., TD.

10 M000 Series MET TUBE VRIBE RE FOWMETER M /N (OC INDICTOR WITH PROXIMITY SWITCH TYPE RM) With local flow rate indication, M /N has a proximity switch which outputs alarm signals complying with NMUR standard. In addition to the dust tight and water immersion proof type, the intrinsically safe version is available. SPECIFICTION OF TRNSMITTER larm point Switch : points ( point high alarm, point low alarm or points high and low alarm) : Proximity switch Power supply voltage : V DC Operating current Setting accuracy Reset span Enclosure : Proximity switch complying with NMUR, ON :m or less, OFF : m or more : ±.% F.S. (gainst flow calibration) : ess than.% F.S. (gainst flow calibration) : G/ or NPT/ or others : Dust tight and water immersion proof IP : Intrinsically safe Ex ia IIC T...T (The temperature class of TIIS certified products is T, and that of KOSH certified products is T...T. See Page for details.) mbient temp. : Dust tight and water immersion proof to 0 C : Intrinsically safe 0 to 0 C TIIS-certified transmitter 0 to 0 C Other certified transmitters (mbient temperatures above are subject to the safety barrier.) Insulation resistance : MΩ or more/00v DC (between batch of power supply terminal and indicator case) Withstand voltage : 00V DC/min (between batch of power supply terminal and indicator case) DIMENSION OF INDICTOR / TRNSMITTER () () pprox. mass:.kg TERMIN ND WIRING Terminal. High alarm Terminal. ow alarm + + te : Terminal. and are not used for point high alarm. ikewise, terminal. and are not used for point low alarm. 0 TOKYO KEISO CO., TD. TG-F0-E

11 M000 Series MET TUBE VRIBE RE FOWMETER M /M (OC INDICTOR WITH MICRO SWITCH TYPE RM) With local flow rate indication, M /M has a micro switch which outputs SPDT alarm signals. In addition to the dust tight and water immersion proof type, the intrinsically safe version is available. SPECIFICTION OF TRNSMITTER larm point Switch Rating Setting accuracy : points ( point high alarm, point low alarm or points high and low alarm) : Micro switch (c contact) : 0V C/ as resistance load : ±.% F.S. (gainst flow calibration) te: While switch is on, and if any other flow rate than the alarm setting value is indicated, it may result in causing wrong accuracy. Reset span Enclosure : ess than 0% F.S., less than 0% F.S. when alarm contacts work simultaneously. (gainst flow calibration) : G/ or NPT/ or others : Dust tight and water immersion proof IP : Intrinsically safe Ex ia IIC T...T (TIIS certified products are subject to the safety barrier. The temperature class of KOSH certified products is T...T. See Page for details.) mbient temp. : Dust tight and water immersion proof to 0 C : Intrinsically safe 0 to 0 C Insulation resistance Withstand voltage : MΩ or more/00v DC (between batch of power supply terminal and indicator case) : 00V C/min (between batch of power supply terminal and indicator case) DIMENSION OF INDICTOR / TRNSMITTER () () pprox. mass:.kg TERMIN ND WIRING High alarm ow alarm COM COM NC. NO. NC. NO. Terminal. High alarm Terminal. ow alarm COM. COM. NC. NC. NO. NO. te : Terminal.,, are not used for point high alarm. ikewise, terminal.,, are not used for point low alarm. TG-F0-E TOKYO KEISO CO., TD.

12 M000 Series MET TUBE VRIBE RE FOWMETER M /M / E (FME PROOF) M /M / E outputs an alarm signal by SPDT contacts by adding a micro switch to the local flow rate indicator. SPECIFICTION OF TRNSMITTER larm point Switch Rating Setting accuracy : points ( point high alarm, point low alarm or points high and low alarm) : Micro switch (c contact) : V C/ or 0V DC/ : ±.% F.S. (gainst flow calibration) te: While switch is on, and if any other flow rate than the alarm setting value is indicated, it may result in causing wrong accuracy. Reset span Enclosure : ess than % F.S. (gainst flow calibration), less than 0% F.S. when alarm contacts work simultaneously. : G/ or NPT/ or others : Dust tight and water immersion proof IP : Flameproof Ex d IIC T to T (The temperature class of TIIS certified products is T, and that of KOSH certified products is T...T. See Page for details.) mbient temp. : Dust tight and water immersion proof to 0 C : Flameproof 0 to C TIIS-certified transmitter 0 to 0 C Other certified transmitters Insulation resistance Withstand voltage : MΩ or more/00v DC (between batch of power supply terminal and indicator case) : 00V C/min (between batch of power supply terminal and indicator case) DIMENSION OF INDICTOR / TRNSMITTER TERMIN ND WIRING High alarm ow alarm COM COM NC. NO. NC. NO. Terminal. High alarm Terminal. ow alarm COM. COM. NC. NC. NO. NO. te : Terminal.,, are not used for point high alarm. ikewise, terminal.,, are not used for point low alarm. TOKYO KEISO CO., TD. TG-F0-E

13 M000 Series MET TUBE VRIBE RE FOWMETER M / / E (FMEPROOF VERSION) II II II IIII II M / / I ( INTRINSICY SFE VERSION) II II II II IIII INTRINSICY SFE SPECIFICTION OF CURRENT TRNSMISSION ND PROFIBUS P COMMUNICTION INTRINSICY SFE SPECIFICTION OF RM OUTPUT II TG-F0-E TOKYO KEISO CO., TD.

14 M000 Series MET TUBE VRIBE RE FOWMETER DDITION FUNCTION Cooling fin (Model M /FB) cooling fin is to be provided between tube part and indicator housing to release fluid heat in case fluid temperature is more than 0 C. Cooling fin is available for models M (Bottom-Top side), M (Bottom side-top side), M (eft- Right) and M (Right-eft). Float guide Fin Body Flow Jacket (Model M /JS, Semi-jacket, M /JF, Full-jacket) Heating jacket is available for the application of high viscosity and/or sticky fluids. Semi-jacket covers tube part only and full-jacket covers flanges as well. Steam inlet/outlet is screw connection (Rc or NPT). Heating jacket is available for M (Bottom-Top) and M (Bottom-Top side). Only 0 lbs rating is available for full-jacketed flowmeters (M /JF). -Rc/ ead pipe jackets ead pipe -Rc/ ead pipe jackets ead pipe Jackets pipe Jackets pipe iquid damper (Model M /D) damper is to be provided for steam and gas applications to prevent vibration of float. damper pot is provided at the bottom of tube part in which damper liquid (silicon or diflon oil) is contained. The friction between damper liquid and damper makes the float movement smooth for stable indication and durability of moving part. Damper is also recommended for liquid application with heavy pulsation. vailable types are M (Bottom side-top side), M (eft- Right) and M (Right-eft). Body -Rc/ Semi-jacket Body -Rc/ Full-jacket Float rod Flow Gas damper (Model M /DU) Gas damper is available for gas measurement application which does not require damper liquids. (Gas dampers are available for metallic flowmeters only.) Mechanical damper is integrated at the part of float guide which consists of piston and cylinder. s it is not required to install liquid damper at the bottom of flowmeters, it contributes to increase the flexibility of piping design. lso it is not required to fill damper liquid that saves maintenance labour works. Gas damper is applicable for gas measurement applications and not suitable for liquids and steam. lso chlorine gas (easy to form chemical compound) and gas containing rust, trash and oil may hinder the function of piston part. Consult factory for details. vailable size is 0mm to mm ( for mm) and only for metallic material (t for lined material). Damper liquid Damper pot Damper Cylinder Piston Float rod Float TOKYO KEISO CO., TD. TG-F0-E

15 M000 Series MET TUBE VRIBE RE FOWMETER Slurry (Model M /S) Float The structure of the float and float part allows solids to pass easily. ccordingly, this model is suitable for measuring liquids containing fibers, granules, etc. In addition to the standard stainless steel, PVC lining is available, which is suitable for plating drainage and other highly corrosive liquids. Guide Float rod Sanitary (Model M /SR) This model is designed and manufactured for sanitary processes. It can be fitted onto process lines through IDF clamps (ISO standard). ll wetted parts are buff polished (#0 to #00). It can be easily disassembled and assembled for cleaning. The electrolytic polishing is also available as an option. See the Technical Guidance TG- F of M000/SR series. TG-F0-E TOKYO KEISO CO., TD.

16 M000 Series MET TUBE VRIBE RE FOWMETER DIMENSIONS, MTERI, PRESSURE OSS, FOW RTE TBE [METIC MTERI] M (Flow direction : BottomTop) M /B (Flow direction : BottomTop, ong body design) For liquid Table Q water (m /h) 0.0.(0.). (.).0 (.). (.). (.). (.) 0. (.). (.) 0 ( ) 0 ( ) Pressure loss (kpa) Figures in ( ) are those of 0K class. 0K, Class 0 0K, Class 00 * te: The mass shown in the table is for the local indicator, and it is also same for the mass in the subsequent tables. In case of "with transmission function," refer to the outside dimension for each model. Table Description Class Class Class Class ower body Flange Float guide Other special metallic material available on request. * Float rod comes out 0mm during operation in meter size 0mm ~ 0mm. The straight length of downstream pipe with the same size as the fl owmeter must be more than 0 mm for a free movement of the fl oat rod. In case of M /B (Bottom-Top, ong body design) this coming out is avoided by extending the tube length. The extension length of body ( dimension) is 0mm for 0K (0lbs) version. Consult factory for length of 0K (00lbs) version. M /DU Table (Flow direction : BottomTop, with gas damper) For gas (0) M /S (Flow direction : BottomTop) M /B/S (Flow direction : BottomTop, ong body design) For liquid and slurry Rangeability 0: (0) Table Q water (m /h) Rangeability 0: Q air [m /h(nor)] Pressure loss (kpa) Pressure Size loss (kpa) JIS0K te: Rangeability for models with the S code is 0:. te: The mass shown in the table is for the local indicator, and it is also same for the mass in the subsequent tables. In case of "with transmission function," refer to the outside dimension for each model. Table Description Class Class Class Class ower body Flange Float guide Other special metallic material available on request. * Float rod comes out 0mm during operation in meter size 0mm ~ 0mm. The straight length of downstream pipe with the same size as the flowmeter must be more than 0 mm for a free movement of the float rod. In case of M /B/S (Bottom-Top, ong body design) this coming out is avoided by extending the tube length. The extension length of body ( dimension) is 0mm for 0K (0lbs) version. Consult factory for length of 0K (00lbs) version. TOKYO KEISO CO., TD. Table Description Class Class Class Class ower body Flange Float guide Other special metallic material available on request. TG-F0-E

17 M000 Series MET TUBE VRIBE RE FOWMETER M (Flow direction : BottomTop side) For liquid Table Table Q water (m /h) 0.0. (0.). (.). (.). (.). (.). (.0) 0. (.) 0. (.0) 0 ( ) 0 ( ) Description Body Flange Upper flange ead pipe Gasket Pressure loss (kpa) Class SGP n-asbestos K, Class 0 0K, Class Figures in ( ) are those of 0K class "H" dimension will be extended by 0mm if a cooling fin is provided. Class n-asbestos Class n-asbestos Class n-asbestos STPG0 for Medium press. 00 lbs (0K) class. Other special metallic material available on request. M /S (Flow direction : BottomTop side) Table For liquid and slurry Table 0 M DU (Flow direction : BottomTop side, with gas damper) For gas Table Q air Pressure Size loss [m /h (nor)] (kpa) JIS 0K 0 Table Description Body Flange Upper flange ead pipe Gasket Class SGP n-asbestos Class Class Class n-asbestos n-asbestos n-asbestos STPG0 for Medium press. 00 lbs (0K) class. Other special metallic material available on request. TG-F0-E TOKYO KEISO CO., TD.

18 M000 Series MET TUBE VRIBE RE FOWMETER M (Flow direction : Bottom sidetop side) For liquid () Table Table Q water (m /h) 0.0. (0.). (.). (.). (.). (.). (.0) 0. (.) 0. (.0) 0 ( ) 0 ( ) Description Body Flange Upper flange ead pipe Gasket Class SGP Pressure loss (kpa) n-asbestos K, Class 0 0K, Class Figures in ( ) are those of 0K class "H" dimension will be extended by 0mm if a cooling fin is provided. Class Class Class n-asbestos n-asbestos n-asbestos STPG0 for Medium press. 00 lbs (0K) class. Other special metallic material available on request. M /DU (Flow direction : Bottom sidetop side, with gas damper) For gas Table Q air [m /h(nor)] Pressure loss (kpa) Size () JIS 0K 0 () Table Description Body Flange Upper flange ead pipe Gasket Class SGP n-asbestos Class Class Class n-asbestos n-asbestos n-asbestos STPG0 for Medium press. 00 lbs (0K) class. Other special metallic material available on request. M /D (Flow direction : Bottom sidetop side, with liquid damper) For gas and steam 0 () TOKYO KEISO CO., TD. Table Q water (m /h) Q air [m /h(nor)] 0.0. (0.).. (.). (.) (). (.). (.). () (0). (.) (). (.0) 0 () 0. (.) 0 (0) 0. (.0) () 0 () 00 () 0 () 00 () Table Body Flange Upper flange ead pipe Gasket Description Class SGP Pressure loss (kpa) Class Figures in ( ) are those of 0K class. 0K, Class 0 0K, Class "H" dimension will be extended by 0mm if a cooling fin is provided. Class Class n-asbestos n-asbestos n-asbestos n-asbestos STPG0 for Medium press. 00 lbs (0K) class. Other special metallic material available on request. TG-F0-E

19 M000 Series MET TUBE VRIBE RE FOWMETER M, M (Flow direction : eftright, Righteft) For liquid Table Table 0 Description Body Flange Upper flange ead pipe Gasket Q water (m /h) Class SGP n-asbestos Pressure loss (kpa) K, Class 0 0K, Class "H" dimension will be extended by 0mm if a cooling fin is provided. Class Class Class n-asbestos n-asbestos n-asbestos STPG0 for Medium press. 00 lbs (0K) class. Other special metallic material available on request. M /D, M /D (Flow direction : eftright, Righteft, with liquid damper) For gas and steam 0 Table Table Q water (m /h) Description Body Flange Upper flange ead pipe Gasket 0 Damper Q air [m /h(nor)] Class SGP Pressure loss (kpa) K, Class 0 0K, Class "H" dimension will be extended by 0mm if a cooling fin is provided. Class Class Class n-asbestos n-asbestos n-asbestos n-asbestos STPG0 for Medium press. 00 lbs (0K) class. Other special metallic material available on request. M /JS, M /JF (Flow direction : BottomTop, with jacket) For liquid (0) (0) Table Table Description Class Body Jacket pipe Flange Float guide Class Class Class TG-F0-E TOKYO KEISO CO., TD.

20 M000 Series MET TUBE VRIBE RE FOWMETER M /JS/S, M /JF/S (Flow direction : BottomTop, with jacket) For liquid and slurry (0) (0) Table Q water (m /h) Pressure loss (kpa) K. Class 0 0K. Class 00 * * Float rod comes out by 0mm during operation in meter sizes 0mm 0mm. The straight length of downstream pipe with the same size as the flowmeter must be more than 0 mm for a free movement of the float rod. Table Description Class Body Jacket pipe Flange Float guide Class Class Class M /JS, M /JF (Flow direction : BottomTop side, with jacket) For liquid 0 0 Table Q water (m /h) Pressure loss (kpa) K. Class 0 0K. Class Only General purpose 0 lbs (0K) class is available for full jacketed version. (M /JF) Table Body Flange Upper flange ead pipe Gasket Description Class SGP n-asbestos 0 Upper jacket pipe Jacket pipe Class Class Class n-asbestos n-asbestos n-asbestos SGP or STPG0 (Depending on jacket medium press.) STPG0 for Medium press. 00 lbs (0K) class. Other special metallic material available on request. 0 [RUBBER ND ETFE INED MTERI] M (Flow direction : BottomTop) For liquid 0 TOKYO KEISO CO., TD. Table Table 0 Description Class Class Rubber lined Rubber lined PVC F.C.R. Other metallic material on request Upper body ower body Float guide () Float guide (U) Gasket Rubber lined Rubber lined PVC PVC EPDM Rubber lined Rubber lined PVDF PVDF EPDM Float rod material is ETFE lined for meter size and 0mm. Float rod material is ETFE lined for meter size, 0, and 0mm. Table Description Class F.C.R. lined F.C.R. lined Other metallic material on request Upper body F.C.R. lined ower body F.C.R. lined Float guide () PVDF Float guide (U) PVDF Gasket PTFE F.C.R. means Fluorocarbon Resin. TG-F0-E

21 M000 Series MET TUBE VRIBE RE FOWMETER M (Flow direction : BottomTop side) For liquid 0 Table Q water (m /h) Pressure loss (kpa) Size JIS0K 0 Class, Class Table Description Class Class Rubber lined Rubber lined PVC F.C.R. Other metallic material on request Upper body ower body Float guide () Float guide (U) Gasket Rubber lined Rubber lined PVC PVC EPDM Rubber lined Rubber lined PVDF PVDF EPDM Float rod material is ETFE lined for meter size, 0 and mm. Table Description Class F.C.R. lined F.C.R. lined Other metallic material on request Upper body F.C.R. lined ower body F.C.R. lined Float guide () PVDF Float guide (U) PVDF Gasket PTFE F.C.R. means Fluorocarbon Resin. [PVC INED MTERI] M, M /S (Flow direction : BottomTop) For liquid Table Q water (m /h) Pressure loss (kpa) Size JIS0K Table Description Material Upper body ower body Float receiver Float guide Gasket PVC lined PVC PVC lined PVC lined PVC PVC EPDM Float rod material is ETFE lined for meter size and 0mm. M (Flow direction : BottomTop side) For liquid slurry type is available. For details, contact us. 0 Table Q water (m /h) Pressure loss (kpa) Conn size Size JIS0K Table 0 Description Material Upper body ower body Float guide Upper flange ead pipe Gasket PVC lined PVC PVC lined PVC lined PVC PVC EPDM TG-F0-E TOKYO KEISO CO., TD.

22 M000 Series MET TUBE VRIBE RE FOWMETER [GSS INED MTERI] M (Flow direction : BottomTop) For liquid Table F.C.R. Float Q water Pressure (m /h) loss (kpa) M Float Q water Pressure (m /h) loss (kpa) Conn size Size JIS0K 0 0 Table 0 Description Class Upper body ower body Float receiver Float guide Gasket F.C.R. PVDF PVDF PTFE Class M M M PTFE Float rod material is ETFE lined for meter size, 0, and 0mm. F.C.R. means Fluorocarbon Resin. M (Flow direction : BottomTop side) For liquid 0 TOKYO KEISO CO., TD. Table Table 0 F.C.R. Float M Float Conn Q water Pressure Q water Pressure size (m /h) loss (kpa) (m /h) loss (kpa) Description Class F.C.R. PVDF Upper body ower body Float buide Upper flange ead pipe Gasket PTFE Class M M FEP tubed PTFE Size Float rod material is ETFE lined for meter size, 0 and mm JIS0K 0 0 F.C.R. means Fluorocarbon Resin. TG-F0-E

23 M000 Series MET TUBE VRIBE RE FOWMETER M /D (Flow direction : Bottom sidetop side, with liquid damper) For gas Table F.C.R. Float M Float Conn Q air Pressure Q air Pressure size [m /h(nor)] loss (kpa) [m /h(nor)] loss (kpa) Size () JIS0K 0 0 () Table 0 Description Class F.C.R. PVDF Body Float buide Upper flange ead pipe Gasket Damper Blind flange PTFE Class M M FEP tubed PTFE Float rod material is ETFE lined for meter size, 0 and mm. F.C.R. means Fluorocarbon Resin. TG-F0-E TOKYO KEISO CO., TD.

24 M000 Series MET TUBE VRIBE RE FOWMETER SEECTION OF FOWMETER. iquid application a. Selection of meter size Maximum possible flow rate each meter size is shown in dimension tables from Page to. These figures are based on water flow (Density.0g/cm and Viscosity.0MPa s). If actual fluid condition is different from such figures, a conversion calculation is required as following formula: Qw = Q. / (./ ρ ) - Qw : Water converted flow rate (m /h) Q : Flow rate of actual fluid (m /h) ρ : Density of actual fluid (g/cm ) Example Fluid: lcohol Density: 0.g/cm Flow rate: 0m /h Flowmeter to be used: M Qw = 0. / (./0.) - = 0 0. =.(m /h) Referring to table on Page, the required meter size is. For possible connection flange sizes, refer to Table. b. Viscosity limit In case the Viscosity of fluid is more than mpa s, confirm the suitability shown in the fiigure below. Trace viscosity and flow rate and confirm the crossing point is below the curve. If the crossing point is above the curve, consult factory for detailed calculation by com puter. Viscosity curve Viscosity [mpa s] Flow rate [/h] c. Slurry application Consult factory if contaminations, sand, dirt and other solid particles are expected in fluid. M /S series slurry flowmeter is available.. Gas application Generally, flowmeters with damper (Model M /DU, M /DU, M /DU, M D, M /D, M /D) are recommended for gas application to prevent float vibration. Selection of meter size Maximum possible flow rate for each meter size is shown in dimension tables of M /DU, M /DU, M /DU, M / D, M /D, and M /D flowmeters. If actual fluid condition is different from such figures, a conversion calculation is to be performed by the following formula: Q = Q 0.0 ρ (+t) / (0.0+p) Q : Converted flow rate in air 0 C, atm [m /h(nor)] ρ : Density of gas to be measured [kg/m (nor)] p : Pressure of gas to be measured (MPa) t : Operating temperature ( C) Example Gas to be measured : Nitrogen (N) Specific weight ( ρ ) :.kgf/m (nor) Operating pressure ( p ) : 0.MPa Operating temperature ( t ) : 0 C Flowmeter to be used : M /DU Q = (+0) / (0.0+0.) = =. [m /h (nor)] Referring to table on Page, the suitable meter size is 0. For possible connection flange sizes, refer to Table. TOKYO KEISO CO., TD. TG-F0-E

25 M000 Series MET TUBE VRIBE RE FOWMETER. Steam application Flowmeters with liquid damper (type M /D, M /D, M /D) are recommended for steam application to prevent float vibration. lso a cooling fin is normally needed because of high temperature. Selection of meter size Steam flow rate is to be converted into water flow rate by the following formula for size determination. Qw = Qs 0.0 ρ Qw : Water converted flow rate (m /h) Qs : Steam flow rate (m /h) ρ : Density of steam (kg/m ) Example Fluid Saturated : Steam Pressure : 0.MPa Flow rate : t/h Flowmeter to be used : M /D First, density of the steam is to be obtained from Steam graph etc. In this application, density(ρ) of 0.MPa steam is.kg/ m. Saturated steam curve (by temperature) is shown in the fiigure below and saturated steam curve (by pressure) is shown in the fiigure below for reference. rmally, flow rate of steam is described in weight unit, which is to be converted to volume unit (Qs) as follows: Qw = 0.0. = 0.0 =. (m /h) Referring to Table on Page, the suitable meter size is. For possible connection flange sizes, refer to Table. Density of saturated Steam(by temperature) Density of saturated Steam (by pressure) Density [kg/m ] Density [kg/m ]. Steam temp. [ C] Steam press. [MPa] TG-F0-E TOKYO KEISO CO., TD.

26 M000 Series MET TUBE VRIBE RE FOWMETER. Connection flanges Table shows possible connection flange sizes against selected meter sizes. The table is applicable for flowmeters with Metallic materials, Rubber lining, ETFE lining. Only listed connection sizes in dimension tables are available for flowmeters with PVC lining and Glass lining. Table Model M M /JS, JF M M /JS, JF M M M Flow direction Bottom Top Bottom Top Bottom Top side Bottom Top side Bottom side Top side eft Right Right eft size gainst meter size ±0 size + size. Scale graduation Customer can select any one of the following standard scale graduations if meter size and connection flange meet the specification. Range ability is 0 : Example If required scale range is 0 00 m /h (nor), the graduation on the flowmeter will be 0 0 m /h (nor) Standard scale graduation. Special orders a. ow pressure drop version If standard pressure drop does not meet the requirement, ow pressure drop version is available on request. Consult factory for further details. b. ow temperature application If the fluid temperature is very low (i.e. liquefied gas etc.), Special arrangement to prevent frost is available. Consult factory for further detail. c. High pressure application Up to MPa possible with experience. Consult factory for further details. TOKYO KEISO CO., TD. TG-F0-E

27 M000 Series MET TUBE VRIBE RE FOWMETER CUTIONS This flowmeter transmits the displacement caused by the magnet coupling. surrounding magnetic field might affect its performance. void installation near magnetic fields. Magnetic materials including insulation covers may also affect its performance; do not bring them within 0 cm from the flowmeter. When installing two or more flowmeters, place them at least the distances shown in the figures below apart from each other to avoid mutual interference. For maintenance, ensure a clearance of at least 0 cm between the indicator of one flowmeter and the body of other flowmeters. * Specification is subject to change without notice. Head Office : Shiba Toho Building, Shibakoen, Minato-ku, Tokyo 0 Tel : +- (KEY) ; Fax : +- overseas.sales@tokyokeiso.co.jp ; UR : TG-F0-E TOKYO KEISO CO., TD.