Coriolis Mass Flowmeter. (MCM Series) 100% Customer Satisfaction MAXIFLO TM. Coriolis Mass Flowmeter Series MCM

Transcription

1 MAXIFO TM Features MaxiFlo Coriolis Mass Flowmeter series MCM is a mass flow meter that measures mass flow, density and temperature of liquids, slurries and gases. And it even measures oil content in water. It has no moving parts and doesn't require any special device for installation. And it doesn t require flow profile stabilization by means of flow straightener or straight pipe run either upstream or downstream. The wetted parts are made of high-grade stainless steel (SUS316) and therefore can be used for corrosive liquids. DSP (digital signal processing) technology assures high accuracy of 0.1%, 0.2% and 0.5% of reading and a wide turndown ratio Can measure liquids of all types, slurries and gases. Wetted parts are made from high-grade stainless steel and can be used for corrosive liquids Mass flow, volume flow, density and temperature measurement without additional instruments Measurement accuracy is not affected by the flow profile (laminar or turbulent) and therefore, there's no need for flow profile stabilization by means of flow straightner or straight pipe sections either upstream or downstream Minimal pressure loss No moving parts in the flow, longer life and easy maintenance Measuring Principle of Coriolis MFM 100% Customer Satisfaction Coriolis Mass Flowmeter (MCM Series) Integral Type with U type sensor Coriolis Mass Flowmeter The mass flow-sensing element is composed of a pair of bent tubes, vibrators and displacement sensors. The trick here is to detect the Coriolis force applied on the tube by the flowing fluid inside the bent oscillating tube. In order to do that, the vibrators vibrate the bent tubes at the natural resonant frequency of the tubes. When there's a flow inside the tubes, the Coriolis force at work distorts the vibration of the tubes. This distortion can be measured using the displacement sensors. The amount of distortion is directly proportional to the mass flow of the fluid inside the tube. By accurately processing the displacement, the accurate mass flow is directly measured. iquids, slurries and gases can be measured. It boasts strong immunity to noise, high accuracy, wide turndown ratio, stability and reliability. Integral Type with Half-circle Sensor Integral Type with Triangular Sensor

2 MAXIFO TM Flow Rates Table (mm) Allowable Flow Range (kg/h) For iquids Normal Flow Range for Accuracy 0.1% (kg/h) U Type Normal Flow Range for Accuracy 0.2% & 0.5% (kg/h) Zero Stability(kg/h) ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ Half-Circle Type ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ( mm ) Allowable Flow Range ( kg/h ) For Gases Normal Flow Range with Accuracy 0.5% ( kg/h ) Zero Stability ( kg/h ) ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~

3 MAXIFO TM Outline Dimensions and Weights Integral Type Remote Type H H H 4.0MPa 6.3MPa Integral Remote Net Weight (kgs) H 1 H 6.3MPa Integral Remote Net Weight (Kgs) 4.0MPa Remote Transmitter Weight: 5 kgs

4 MAXIFO TM Technical Specifications Transmitter Sensor Sizes Medium Measured Variables Working Temperature Working Pressure Working Environment Output Power Supply Ingress Protection Explosion Proof Integral / Remote Type U type, half-circle type and triangular type 10 ~ 200mm iquid, gas, slurry - Accuracy / Repeatability (±%): Flow iquid 0.1 / 0.05, 0.2 / 0.1, 0.5 / 0.25 Gas: 0.5 / Range: 0.2 ~ 3.0 g/cm 3 Density - Accuracy: ±0.02 g/cm 3 - Repeatability: g/cm 3 - Range: -150 ~ 400 Temperature - Accuracy: ±1.0 - Measurement of water content in oil in % Water-cut - Accuracy: ±2% Integral type: -50 ~ 125 Remote type: -50 ~ 200 Remote type with high temperature option: -50 ~ 300 Remote type with low temperature option: -150 ~ , 2.5, 4.0, 6.3 MPa High pressure available upon request - Frequency: <2000Hz Vibration - Acceleration: <2G (Note: 1G = 9.8 ) Temperature Humidity 4-20mA Frequency Pulse RS Operation: -40 ~ +55 Storage: -20 ~ +70 at +25 without condensation Operation: <90% - Storage: <95% - 2-wire, loop-powered - oad Resistance: 250 ~ 600 Ohm - Error: ±0.2% F.S - OCT (Open Collector, Dry Contact) - Range: 0 ~ 10 KHz - Error:±0.075% MODBUS-RTU - DC: 18 ~ 30V, Consumption 10 ~ 15W - AC: 85 ~ 265V, Consumption 10 ~ 15W IP-65 Integral Type Remote Type Exdib IIC T4 ~ 6 10 ~ 80 Exib IIC T3 ~ ~ 200 Exdib IIC T3 ~ 6

5 MAXIFO TM Model Selection Code MCM-### - # - # - # - ## - ## - # Nominal Size ### Converter Type Sensor Medium Integral Remote U-shape sensor Half circle sensor Triangular sensor iquid Gas I R U H T G Power 220 VAC P1 24 VDC P2 Connections JIS Flange ANSI Flange DIN Flange Other F1 F2 F3 F4 0.1% A Accuracy 0.2% B 0.5% C Options 4-20mA with HART H For example: MCM-050-I-H-G-P1-F1-C A 50mm, 220VAC-powered Coriolis mass flow meter with an integral half-circle sensor with JIS flange to measure a gas with an accuracy of 0.5%

6 We are here for you For further information, visit us at Subject to change without prior notice 12/08 Printed in Korea Seil Enterprise co The information contained in this catalog contains merely general descriptions or characteristics of performance which in case of actual use do not always apply as described or which may change as a result of further development of the products. An obligation to provide the respective characteristics shall only exist if expressly agreed in terms of the contract. All product designations may be trademarks or product names of Seil Enterprise Co. whose use by third parties for their own purposes could violate the rights of the owners. Seoul Korea MAXIFO TM is a registered trademark of