IBV Series Z Alloy Steel Inverted Bucket Vertical Steam Trap

Size: px
Start display at page:

Download "IBV Series Z Alloy Steel Inverted Bucket Vertical Steam Trap"

Transcription

1 Local regulations may restrict the use of this product to below the conditions quoted. In the interests of development and improvement of the product, we reserve the right to change the specification without notice. Copyright 205 IBV Series Z Alloy Steel Inverted Bucket Vertical Steam Trap TI-P07-5 ST Issue Description The IBV series Z inverted bucket steam trap is manufactured using alloy steel for the body and cover; with internal components being made of stainless steel. It is suitable for use with saturated and superheated steam and in high pressure and high temperature applications. The IBV is fully automatic and has been designed in such a way that there is minimal friction from mechanism movement; valve closure is immediate, without any steam loss and the discharge action is positive with no equivocal phases. On the cover of the IBV there in a " hole, threaded and plugged, to eliminate any water discharge after being hydraulically tested before leaving the factory. This hole can be reopened on site for the customer to perform periodic hydro testing. Available types Series C Carbon steel body and cover See TI-P07-0 Series C-LF2 Series Z Carbon steel body and cover with a material specification of A350 LF2 for low temperature applications down to -4 C Alloy steel body and cover See TI-P07-3 Standards This steam trap is designed following the ASME VIII Directive and complies with the requirements of the European Pressure Equipment Directive 97 / 23 / EC and carries the mark when so required. Certification The product is available with material certification to EN Note: All certification / inspection requirements must be stated at the time of order placement. Optional extras On request the IBV steam trap can be equipped with the following: An inbuilt stainless steel check valve Please note that this option is only available for units that have a DP maximum differential pressure of 40 bar and above - See the IBV product nomenclature and selection guide on page 0 for clarification. A Stellite plug and seat. Sizes and pipe connections Please note that all standard flanges (as noted below) will be slip-on type. Weld-neck type flanges can be supplied to special order and must be specified at the time of order placement. ½", ¾", ", ½", 2" and 3" Screwed BSP or NPT Socket weld, according to ASME B. ½", ¾", ", ½", 2" and 3" Flanged ASME B.5 ASME class 50,, 00, and 500* DN5, DN20, DN25, DN40, DN50 and DN80 Flanged EN 092 PN, PN25, PN40, PN3, PN00 and PN0* * Note: that the flanged ASME class 500 and EN 092 PN0 units are limited to a body rating of ASME class Inbuilt check valve Supplied as an Optional extra Materials For items 9, 0,, 2 and 3 see 'Spare parts' for specific part identification The following will be supplied, if specified, at the time of order placement:. A special name-plate when a U-STAMP has been specified. 2. A support bracket. The support bracket will be bolted where indicated ' ' on the adjacent illustration. No. Part Material Body Alloy PED ASTM A82 F22 CL.3 steel U-STAMP ASME SA82 F22 CL.3 2 Cover Alloy steel ASTM A82 F 3 Cover bolts Alloy steel A93 B NACE version (external only) ASTM A479 XM-9 4 Cover gasket Reinforced graphite 5 Channelling pipe Stainless steel AISI 3 Bucket Stainless steel AISI 3 7 Bracket Stainless steel AISI 3 8 Bracket screw Stainless steel AISI 3 9 Lever pin Stainless steel AISI 3 0 Split pin Stainless steel AISI 3 Valve seat Stainless steel series 2 Valve head Stainless steel series 3 Valve lever Stainless steel AISI 3 Page of

2 Pressure / temperature limits (ISO 2) - Screwed, Socket weld and Flanged ASME Temperature C Pressure psi g B A E D C 00 Steam saturation curve 00 F E D B, C Pressure bar g Temperature F * The product must not be used in this region or beyond the parameter of the PMA or TMA of the relative end connection. Please note that the PMO is limited to the maximum DP of the selected IBV. A-B-B Screwed and Socket weld A-C-C ASME class A-D-D ASME class 00 A-E-E ASME class A-F-F ASME class 50 Body design conditions ASME class PMA - Maximum allowable pressure. bar 50 C 2249 psi 22 F TMA - Maximum allowable temperature 538 bar g psi g Minimum allowable temperature -29 C -20 F * PMO - Maximum operating pressure for saturated steam service 23. bar g 792 psi g TMO - Maximum operating temperature 538 bar g psi g Minimum operating temperature 0 C 32 F Designed for a maximum cold hydraulic test pressure of: bar g 3375 psi g Body design conditions ASME class 00 PMA - Maximum allowable pressure 03.4 bar 50 C 500 psi 22 F TMA - Maximum allowable temperature bar g psi g Minimum allowable temperature -29 C -20 F * PMO - Maximum operating pressure for saturated steam service 85. bar g 24 psi g TMO - Maximum operating temperature bar g psi g Minimum operating temperature 0 C 32 F Designed for a maximum cold hydraulic test pressure of:. bar g 2249 psi g Body design conditions ASME class PMA - Maximum allowable pressure 5.7 bar 50 C 750 psi 22 F TMA - Maximum allowable temperature bar g psi g Minimum allowable temperature -29 C -20 F * PMO - Maximum operating pressure for saturated steam service 45. bar g psi g TMO - Maximum operating temperature bar g psi g Minimum operating temperature 0 C 32 F Designed for a maximum cold hydraulic test pressure of: 77.5 bar g 24 psi g Body design conditions ASME class 50 PMA - Maximum allowable pressure 9. bar 50 C 284 psi 22 F TMA - Maximum allowable temperature bar g psi g Minimum allowable temperature -29 C -20 F * PMO - Maximum operating pressure for saturated steam service 4 bar g 203 psi g TMO - Maximum operating temperature bar g psi g Minimum operating temperature 0 C 32 F Designed for a maximum cold hydraulic test pressure of: 29.4 bar g 42 psi g TI-P07-5 ST Issue Page 2 of

3 Pressure / temperature limits (ISO 2) - Flanged DIN Temperature C A 00 0 L K J H G Steam saturation curve L K J H G Pressure bar g 00 * The product must not be used in this region or beyond the parameter of the PMA or TMA of the relative end connection. Please note that the PMO is limited to the maximum DP of the selected IBV. A-G-G A-H-H A-J-J A-K-K A-L-L PN00 PN3 PN40 PN25 PN Body design conditions PN00 PMA - Maximum allowable pressure 00 bar 50 C TMA - Maximum allowable temperature bar g Minimum allowable temperature -29 C * PMO - Maximum operating pressure for saturated steam service 99.4 bar g TMO - Maximum operating temperature bar g Minimum operating temperature 0 C Designed for a maximum cold hydraulic test pressure of: 43 bar g Body design conditions PN3 PMA - Maximum allowable pressure 3 bar 50 C TMA - Maximum allowable temperature bar g Minimum allowable temperature -29 C * PMO - Maximum operating pressure for saturated steam service 3 bar g TMO - Maximum operating temperature bar g Minimum operating temperature 0 C Designed for a maximum cold hydraulic test pressure of: bar g Body design conditions PN40 PMA - Maximum allowable pressure 40 bar 50 C TMA - Maximum allowable temperature bar g Minimum allowable temperature -29 C * PMO - Maximum operating pressure for saturated steam service 40 bar g TMO - Maximum operating temperature bar g Minimum operating temperature 0 C Designed for a maximum cold hydraulic test pressure of: 57.2 bar g Body design conditions PN25 PMA - Maximum allowable pressure 25 bar 50 C TMA - Maximum allowable temperature bar g Minimum allowable temperature -29 C * PMO - Maximum operating pressure for saturated steam service 25 bar g TMO - Maximum operating temperature bar g Minimum operating temperature 0 C Designed for a maximum cold hydraulic test pressure of: 35.7 bar g Body design conditions PN PMA - Maximum allowable pressure bar 50 C TMA - Maximum allowable temperature bar g Minimum allowable temperature -29 C * PMO - Maximum operating pressure for saturated steam service bar g TMO - Maximum operating temperature bar g Minimum operating temperature 0 C Designed for a maximum cold hydraulic test pressure of: 22.8 bar g TI-P07-5 ST Issue Page 3 of

4 Capacities - DN5 x.5 for continuous use, x 2 to x 3 for intermittent use. Condensate discharge = 500 kg /h Effective differential pressure = 30 bar Upstream pressure = 45 bar g Backpressure = 5 bar g differential pressure of bar which is follow the guide on page Differential pressure bar (x 00 = kpa) TI-P07-5 ST Issue Page 4 of

5 Capacities - DN20 x.5 for continuous use, x 2 to x 3 for intermittent use. Condensate discharge = 050 kg /h Effective differential pressure = 30 bar Upstream pressure = 45 bar g Backpressure = 5 bar g differential pressure of bar which is follow the guide on page Differential pressure bar (x 00 = kpa) TI-P07-5 ST Issue Page 5 of

6 Capacities - DN25 x.5 for continuous use, x 2 to x 3 for intermittent use. Condensate discharge = 0 kg /h Effective differential pressure = 4 bar Upstream pressure = 5 bar g Backpressure = bar g differential pressure of 5 bar which is follow the guide on page Differential pressure bar (x 00 = kpa) TI-P07-5 ST Issue Page of

7 Capacities - DN40 x.5 for continuous use, x 2 to x 3 for intermittent use. Condensate discharge = 0 kg /h Effective differential pressure = 50 bar Upstream pressure = 75 bar g Backpressure = 25 bar g differential pressure of 0 bar which is follow the guide on page Differential pressure bar (x 00 = kpa) TI-P07-5 ST Issue Page 7 of

8 Capacities - DN50 x.5 for continuous use, x 2 to x 3 for intermittent use. Condensate discharge = 000 kg /h Effective differential pressure = 8 bar Upstream pressure = 0 bar g Backpressure = 2 bar g differential pressure of 20 bar which is follow the guide on page Differential pressure bar (x 00 = kpa) TI-P07-5 ST Issue Page 8 of

9 Capacities - DN80 x.5 for continuous use, x 2 to x 3 for intermittent use. Condensate discharge = 5000 kg /h Effective differential pressure = 30 bar Upstream pressure = bar g Backpressure = 25 bar g differential pressure of bar which is follow the guide on page Differential pressure bar (x 00 = kpa) TI-P07-5 ST Issue Page 9 of

10 Dimensions / weights (approximate) in mm and kg IBV size Dimensions A B C D E BSP + NPT Socket weld Weights Flanged ASME class: Flanged EN 092: PN PN25 PN40 PN3 PN00 PN0 DN5 ½" DN20 ¾" DN25 " DN40 ½" DN50 2" DN80 3" The following will be supplied, if specified, at the time of order placement: E E E D D D. A special name-plate when a U-STAMP has been specified. 2. A support bracket. The support bracket will be bolted where indicated ' ' on the adjacent illustration. Socket weld A B C Screwed Flanged IBV product nomenclature and selection guide: Please note that other units are available on request to suit the specifics of a particular process application. Series Z = Alloy steel Z Saturated steam temperature for the body rating Alloy steel 23 bar g = ASME class body 85 bar g = ASME class 00 body 45 bar g = ASME class body DP maximum differential pressure DP =, 0, 5, 20, 40,,,, 0 bar 0 Size = ½", ¾", ", ½", 2", 3" or DN5, DN20, DN25, DN40, DN50, DN80 3" Screwed = BSP or NPT 23 Connections Optional extras Socket weld = According to ASME B. Flanged ASME = ASME class 50,, 00,, 500 EN 092 = PN, PN25, PN40, PN3, PN00, PN0 Blank = Standard NACE = NACE compliancy CV = Check valve Please note that this option is only available for units that have a DP maximum differential pressure of 40 bar and above - See above. ASME class IBV product selection example: IBV - Z " - ASME class - How to order off Spirax Sarco IBV - Z " - Flanged ASME class inverted bucket vertical steam trap having an alloy steel body and cover with stainless steel internals. TI-P07-5 ST Issue Page 0 of

11 Safety information, installation and maintenance For full details see the Installation and Maintenance Instructions supplied with the product. Installation note: The trap must be installed below the drain point with the body upright in a vertical position, the cover at the top and the inlet connection at the bottom; this orientation will ensure that the bucket mechanism will rise and fall vertically without any friction. It is recommended that a strainer is installed upstream of the IBV to protect it from contamination. To permit safe inspection for cleaning or maintenance purpose it is again recommended that suitable shut-off valves are installed upstream and downstream of the IBV application. It needs to be appreciated that there is blast discharge with this device, consequently the downstream accessories, if any, should be installed at a minimum distance of m from the IBV. Disposal This product is recyclable. No ecological hazard is anticipated with the disposal of this product providing due care is taken. Spare parts The spare parts available are shown in heavy outline. Parts drawn in broken line are not supplied as spares. Available spares Valve assembly 4, 7, 8, 9, 0,, 2, 3 Bucket assembly 4,, 9, 0 Cover gasket (packet of 3) 4 How to order spares Always order spares by using the description given in the column headed 'Available spares' and state the type of trap, pressure rating and size and type of the connections. Example: - Valve assembly for a Spirax Sarco IBV - Z " - Flanged ASME class inverted bucket vertical steam trap Optional extra Inbuilt stainless steel check valve 4 Please note that this option is only available for units that have a DP maximum differential pressure of 40 bar and above - See the IBV product nomenclature and selection guide on page 0 for clarification. TI-P07-5 ST Issue Page of

IBV Series C Carbon Steel Inverted Bucket Vertical Steam Trap

IBV Series C Carbon Steel Inverted Bucket Vertical Steam Trap Local regulations may restrict the use of this product to below the conditions quoted. In the interests of development and improvement of the product, we reserve the right to change the specification without

More information

Serie B2.1. Flanged ductile iron ball valve. made in. Application fields. Shut-off valves E U R O P E. 18

Serie B2.1. Flanged ductile iron ball valve. made in. Application fields. Shut-off valves E U R O P E. 18 erie B. Flanged ductile iron ball valve BRanDOni made in E U R O P E Application fields WATER CONdITIONING GA EATING INdUTRY FIRE FIGTING www.brandoni.it erie B. eries B. valves are shut-off ball valves

More information

PR CYCLONE SECONDARY SHUTOFF

PR CYCLONE SECONDARY SHUTOFF EN PR CYCLONE SECONDARY SHUTOFF ORIGINAL INSTRUCTIONS CYCLONE SECONDARY SHUTOFF PR530 CYCLONE SECONDARY SHUTOFF PR330 CYCLONE SECONDARY SHUTOFF PR200-250 CYCLONE SECONDARY SHUTOFF PR150 TECHNICAL DATA

More information

Turbine Meter TRZ 03 PRODUCT INFORMATION. Reliable Measurement of Gas

Turbine Meter TRZ 03 PRODUCT INFORMATION. Reliable Measurement of Gas Turbine Meter TRZ 0 PRODUCT INFORMATION Reliable Measurement of Gas TURBINE METER TRZ 0 Method of operation, Construction Method of operation The TRZ 0 turbine meter is a flow meter suitable for gas measurement

More information

CV3000 Series. Characterized Insert Control Valves

CV3000 Series. Characterized Insert Control Valves CV3000 Series Characterized Insert Control Valves The CV3000 Series is a v-type control valve for precise control allowing high pressure drop capability with straight-through flow and bubble-tight shut

More information

Size : Ends : Min Temperature : Max Temperature : Materials : Brass

Size : Ends : Min Temperature : Max Temperature : Materials : Brass Size : Ends : Min Temperature : Max Temperature : DN 3/8" to 4" Female BSP + 0 C + 90 C ( 60 C for 302 and 322 types ) Max Pressure : 16 Bars ( 10 bars for 301-302 types ) Specifications : Swing type Metal

More information

FS-1601C (EN) FORGED STEEL VALVE

FS-1601C (EN) FORGED STEEL VALVE FS-0C (EN) ABOUT US FBV Inc. is an ISO 00 certified company specializing in manufacturing industrial valves including ball valves, gate valves, globe valves, check valves, plug valves and butterfly valves

More information

Direct-operated 2/2-way solenoid valves Type EV210B

Direct-operated 2/2-way solenoid valves Type EV210B Data sheet Direct-operated 2/2-way solenoid valves Type EV20B EV20B covers a wide range of direct-operated 2/2-way solenoid valves for universal use. EV20B is a very robust valve program with high performance

More information

Orifice Plate. Stainless Steel. Flow Data. Herz Valves UK Ltd.

Orifice Plate. Stainless Steel. Flow Data. Herz Valves UK Ltd. Stainless Steel Orifice Plate Flow Data In this flow data manual we have endeavoured to make the information as accurate as possible. We cannot accept any responsibility should it be found that in any

More information

Type M4 - SON - SO - MS

Type M4 - SON - SO - MS 9. REV. Type M - SON - SO - MS Aircaps Tank venting and water excluding aircaps. For installation on service tank air pipes. Inerted void spaces and ballast tanks In order to maintain inert gas pressure

More information

VD1 CLC. Small Valves DIN-range with a higher k v -value

VD1 CLC. Small Valves DIN-range with a higher k v -value 0 EN - Small Valves DIN-range with a higher k v -value VD CLC Valve body made of brass, mat nickel-plated DN, DN 0 and DN Internally and externally threaded (Rp / R) conforming to ISO 7- Manual knob /

More information

Size : Ends : Min Temperature : Max Temperature : Materials : Brass

Size : Ends : Min Temperature : Max Temperature : Materials : Brass Size : Ends : Min Temperature : Max Temperature : DN 1/2" to 1 Free nut BSP, male or female - 10 C + 120 C Max Pressure : 25 Bars Specifications : Before or after water meter PTFE packing With free nut

More information

Direct-operated 2/2-way compact solenoid valves Type EV210A

Direct-operated 2/2-way compact solenoid valves Type EV210A Data sheet Direct-operated 2/2-way compact solenoid valves Type EV210A EV210A covers a wide range of small, directoperated 2/2-way solenoid valves for use in industrial machinery. The compact design together

More information

Cooling Water Flow Regulator

Cooling Water Flow Regulator Temperature controlled, indirectly and directly actuated diaphragm valves / seat valves Port size G 3/8 to G DN 0 to DN 0 ontinuous regulation High accuracy No auxiliary energy required Technical data

More information

Flow rates to 750 l/min

Flow rates to 750 l/min FP Maximum pressure 0 bar Flow rates to 70 l/min Technical data Filter housing (Materials) ead: Cast iron (chemical heat treatment) ousing: Steel (chemical heat treatment) Bypass valve: AISI L (FP 0-0)

More information

Standardized Chemical Pumps. Fields of Application. Designation. Design. Operating Data. Type Series Booklet /7-10 G2 CPK-H

Standardized Chemical Pumps. Fields of Application. Designation. Design. Operating Data. Type Series Booklet /7-10 G2 CPK-H Type Series Booklet.5/7-0 G CPK-H Standardized Chemical Pumps to EN 5/ISO 5/ISO 599, heatable Automation products available: Hya-Drive Hyamaster hyatronic Fields of Application CPK-H pumps are used for

More information

Flow rates to 750 l/min

Flow rates to 750 l/min FP Maximum pressure 0 bar Flow rates to 70 l/min Technical data Filter housing (Materials) ead: Cast iron (chemical heat treatment) ousing: Steel (chemical heat treatment) Bypass valve: AISI L (FP 00-0)

More information

P303 Pressure Regulator

P303 Pressure Regulator P0 Pressure Regulator Minimize Sudden Downstream Load Change Wide Pressure Ranges Integral Monitoring The BelGAS P0 and P0H gas pressure reducing regulators are available with a true monitor regulator,

More information

Solenoid valves Type EVR 2 g 40 NC/ NO New EVR 6 with Steel cover design

Solenoid valves Type EVR 2 g 40 NC/ NO New EVR 6 with Steel cover design MAKING MODERN LIVING POSSIBLE Technical brochure Solenoid valves EVR 2 g 40 NC/ NO New with Steel cover design EVR is a direct or servo operated solenoid valve for liquid, suction, and hot gas lines with

More information

Solenoid valves 2/2-way direct-operated type EV210A

Solenoid valves 2/2-way direct-operated type EV210A MAKING MODERN LIVING POSSIBLE Data sheet Solenoid valves 2/2-way direct-operated type EV210A EV210A covers a wide range of small, direct-operated 2/2-way solenoid valves for use in industrial machinery.

More information

98 Series Backpressure Regulators and Relief Valves

98 Series Backpressure Regulators and Relief Valves 9 Series Backpressure Regulators and Relief Valves Bulletin.:9 November 09 W TYPE 9H W TYPE 9LD Figure. Typical 9 Relief Valves Introduction W TYPE 9HD The 9 Series (Figure ) is used for backpressure or

More information

DN 1/4" to 4" Male, Female BSP - 10 C C Max Pressure : 30 Bars (up to DN1") Specifications : Anti blow-out stem PTFE packing Full bore

DN 1/4 to 4 Male, Female BSP - 10 C C Max Pressure : 30 Bars (up to DN1) Specifications : Anti blow-out stem PTFE packing Full bore Size : Ends : Min Temperature : Max Temperature : DN 1/4" to 4" Male, Female BSP - 10 C + 120 C Max Pressure : 30 Bars (up to DN1") Specifications : Anti blow-out stem PTFE packing Full bore Materials

More information

close to performances of the turbine gas meters designed for custody transfer measurements.

close to performances of the turbine gas meters designed for custody transfer measurements. QUANTOMETER DESIGN AND FUNCTION CPT Quantometers have been designed in order to provide our customers with reliable and inexpensive measuring instruments for secondary flow measurements. Our great experience

More information

Size : Ends : Min Temperature : Max Temperature : Materials : Brass

Size : Ends : Min Temperature : Max Temperature : Materials : Brass Size : Ends : Min Temperature : Max Temperature : DN 1/2" to 1 Free nut BSP, male or female - 10 C + 120 C Max Pressure : 20 Bars Specifications : Before or after water meter PTFE packing With free nut

More information

Inspired By Challenge. Trunnion mounted ball valves

Inspired By Challenge. Trunnion mounted ball valves Inspired y Challenge Trunnion mounted ball valves Trunnion Mounted all Valves Trunnion 81/82 83 91/92 93/94 95/96 Ordering code system Introduction The Habonim trunnion mounted valve series is specially

More information

Flow rates to 475 l/min

Flow rates to 475 l/min FMP Maximum pressure 0 bar Flow rates to 7 l/min Technical data PRSSUR FILTR Filter housing (Materials) ead: Cast iron (chemical heat treatment) ousing: Steel (chemical heat treatment) Bypass valve: Brass

More information

Sta-Saf. System. The. BSBsystems.com BSB.ie Visit our website for the most complete, up-to-date information. Reverse Buckling Technology

Sta-Saf. System. The. BSBsystems.com BSB.ie Visit our website for the most complete, up-to-date information. Reverse Buckling Technology Catalog # 77-4001 The Sta-Saf System Reverse Buckling Technology BSBsystems.com BSB.ie Visit our website for the most complete, up-to-date information. 1 Sta-Saf System The Sta-Saf System includes 11 reverse

More information

3.1 HP 111 HIGH-PERFORMANCE BUTTERFLY VALVE HP 111 TECHNICAL DATA

3.1 HP 111 HIGH-PERFORMANCE BUTTERFLY VALVE HP 111 TECHNICAL DATA HIGH-PERFORMANCE BUTTERFY VAVE HP 111 Wafer type butterfly valve in double-eccentric construction. Reliable sealing even with extreme temperature and pressure conditions. TECHNICA DATA Nominal diameter:

More information

3.2 HP 114 HIGH PERFORMANCE BUTTERFLY VALVE HP 114 TECHNICAL DATA

3.2 HP 114 HIGH PERFORMANCE BUTTERFLY VALVE HP 114 TECHNICAL DATA ug type butterfly valve in double-eccentric construction. Reliable sealing even with extreme temperature and pressure conditions. TECHNICA DATA Nominal diameter: 0 larger nominal diameter on request Face-to-face:

More information

xanik API 6D Trunnion Ball Valves

xanik API 6D Trunnion Ball Valves API 6D Trunnion Ball Valves BV - XANIK SIDE ENTRY TRUNNION BALL VALVES table of contents BALL VALVES INDEX BV - XANIK SIDE ENTRY TRUNION BALL VALVES BV - 3 XANIK BALL VALVE DESIGN FEATURES BV - 4 thru

More information

2D - STRIP ANCHOR LIFTING SYSTEM

2D - STRIP ANCHOR LIFTING SYSTEM 2D - STRIP ANCHOR LIFTING SYSTEM WWW.TERWA.COM Terwa reserves the right to make changes to the documentation at any time Page 1 OVERVIEW LIFTING CLUTCHES AND TRANSPORT ANCHOR SA-B SA-ST SA-TTU UNIVERSAL

More information

Application PN 16 / 40 DN Product features. Compact overall height Body shape gives optimum flow characteristic

Application PN 16 / 40 DN Product features. Compact overall height Body shape gives optimum flow characteristic pplication Control of gases, vapours and liquids. The modular concept of valve, multi spring actuator and digital FOXBORO/Eckardt positioner Type SRD 992 facililates trouble free expansion to allow for

More information

DOMESTIC HOT WATER PUMPS WITH FIXED-SPEED MOTOR, 3x400V AP-, AKP- and AEP- series, threaded G1/2 G1 ¼ LOREM IPSUM JE ZULT MAAR 60 HZ.

DOMESTIC HOT WATER PUMPS WITH FIXED-SPEED MOTOR, 3x400V AP-, AKP- and AEP- series, threaded G1/2 G1 ¼ LOREM IPSUM JE ZULT MAAR 60 HZ. LOREM IPSUM JE ZULT MAAR HZ m Head m/s m/s m/s m/s m/s Ø m Ø Ø Ø Ø l/s Flow kw Shaft power P Ø m/h Ø 9 Ø Ø kw 9 Total input power P Ø DOMESTIC HOT WATER PUMPS WITH FIXED-SPEED MOTOR, xv AP-, AKP- and AEP-

More information

Conductivity sensor for hygienic applications

Conductivity sensor for hygienic applications Conductivity sensor for hygienic applications Type 8221 can be combined with Perfect for demanding applications in the hygienic industry (CIP and SIP compatible) Variants available for usage over a wide

More information

AIR BREATHER FILTERS. Temperature from -25 to +100 C

AIR BREATHER FILTERS. Temperature from -25 to +100 C IR BRETHER FILTERS The comprehensive series of breather filters makes it possible to meet all market demands. Metal and plastic styles suitable for use on mobile equipment are available. The function of

More information

SERIES FMP. Working pressure. 280 bar. Style D Style V Style Z. Style T. Style B. Style S B B D.I. D.I. D.I. D.I. D.I. D.I.

SERIES FMP. Working pressure. 280 bar. Style D Style V Style Z. Style T. Style B. Style S B B D.I. D.I. D.I. D.I. D.I. D.I. 6 FMP SERIES FMP Working pressure 80 bar Style S Style Style T Style D Style V Style Z 7 Technical data Filter body (Materials) ead: Cast iron (chemical heat treatment) ousing: Cast iron (chemical heat

More information

High Pressure fi lters. FHA 051 series. Maximum working pressure up to 56 MPa (560 bar) - Flow rate up to 140 l/min. High Pressure fi lters

High Pressure fi lters. FHA 051 series. Maximum working pressure up to 56 MPa (560 bar) - Flow rate up to 140 l/min. High Pressure fi lters High Pressure fi lters FHA 0 series Maximum working pressure up to 6 MPa (60 bar) Flow rate up to 0 l/min 99 High Pressure fi lters Introduction FILTER SIZG DEX CALCULATION CORRECTIVE FACTOR Page Introduction

More information

Multifunctional Thermostatic Circulation Valve MTCV

Multifunctional Thermostatic Circulation Valve MTCV Multifunctional Thermostatic Circulation Valve MTCV Introduction Fig. 1 Basic version - A Fig. * Self-acting version with automatic disinfection function - B * thermometer is an accessory Fig. 3 Version

More information

DN 1/4" to 4" Male, Female BSP - 10 C C Max Pressure : 40 Bars Specifications : Anti blow-out stem PTFE packing Full bore.

DN 1/4 to 4 Male, Female BSP - 10 C C Max Pressure : 40 Bars Specifications : Anti blow-out stem PTFE packing Full bore. Size : Ends : Min Temperature : Max Temperature : DN 1/4" to 4" Male, Female BSP - 10 C + 120 C Max Pressure : 40 Bars Specifications : Anti blow-out stem PTFE packing Full bore Materials : Brass Page

More information

Contents. Identification LHC. Horizontal split case pumps. Type key. Identification Type key

Contents. Identification LHC. Horizontal split case pumps. Type key. Identification Type key Contents dentification Type key Product data ntroduction Applications Features and benefits Performance range pole pole pole Construction Sectional drawing Construction features Test pressure Operating

More information

Size : Ends : Min Temperature : Max Temperature : Materials : Brass

Size : Ends : Min Temperature : Max Temperature : Materials : Brass Size : Ends : Min Temperature : Max Temperature : DN 1/2" to 2 Free nut BSP, male or female - 10 C + 120 C Max Pressure : 20 Bars up to DN1 1/2, 16 bars over Specifications : Before or after water meter

More information

Pressure Measurement. Transmitters for basic requirements SITRANS P MPS (submersible sensor) Transmitter for hydrostatic level 2/27

Pressure Measurement. Transmitters for basic requirements SITRANS P MPS (submersible sensor) Transmitter for hydrostatic level 2/27 Overview Siemens AG 011 Function s are for measuring the liquid levels in wells, tanks, channels and dams. Diaphragm p Sensor U const. U + (brown) I EM I -1 (blue) 0, U B s are submersible sensors for

More information

High Pressure fi lters. FHB series. Maximum working pressure up to 32 MPa (320 bar) - Flow rate up to 485 l/min

High Pressure fi lters. FHB series. Maximum working pressure up to 32 MPa (320 bar) - Flow rate up to 485 l/min High Pressure fi lters FHB series Maximum working pressure up to MPa (0 bar) - Flow rate up to 8 l/min High Pressure fi lters Introduction FILTER SIZING INDEX CALCULATION CORRECTIVE FACTOR Page Introduction

More information

Hilti North America Installation Technical Manual Technical Data MI System Version

Hilti North America Installation Technical Manual Technical Data MI System Version MIC-SA-MAH 174671 Hilti North America Installation Technical Manual Technical Data MI System Version 1. 08.017 Terms of common cooperation / Legal disclaimer The product technical data published in these

More information

Precision Ball Screw/Spline

Precision Ball Screw/Spline 58-2E Models BNS-A, BNS, NS-A and NS Seal Outer ring Shim plate Seal Spline nut Seal Collar Shim plate Seal End cap Ball Outer ring Ball screw nut Outer ring Ball Retainer Retainer Outer ring Point of

More information

Pneumatic Universal. Actuator MOTORIZED VALVES USE TECHNICAL FEATURES OF THE ACTUATOR. Data sheet

Pneumatic Universal. Actuator MOTORIZED VALVES USE TECHNICAL FEATURES OF THE ACTUATOR. Data sheet Data sheet. - 8 USE The motorized valve is specifically used for the interception and regulation of fluids in: systems using alternative energy industrial systems in general using hot and cold fluids automation

More information

DMHP3(4)L(T)2A00 Series

DMHP3(4)L(T)2A00 Series STANDARDS Valve body: ASME B16.34 Material certification: EN10204-3.1 MTR Quality assurance: ISO 9001:2008 Steel casting: MSS SP-55 Valve marking: MSS SP-25 Valve test: API 598 Direct mount: ISO 5211 End

More information

ISEmax CAM40/CAS40. Technical Information

ISEmax CAM40/CAS40. Technical Information Technical Information Online measurement of nutrient parameters Ion-selective electrode system for the continuous measurement of ammonium and nitrate Application The ion-selective electrode system works

More information

BRAIDED LOOP JOINTS (U-FLEX, V-FLEX)

BRAIDED LOOP JOINTS (U-FLEX, V-FLEX) BRAIDED OOP JOINTS (U-FEX, V-FEX) Braided Expansion Joints Scan this QR Code 16 ANSI DIN EN Ayvaz U-Flex and V-Flex assemlies provide highly flexile and reliale connection features for fire protection

More information

Metal oil filler and air breather filler caps. Bayonet connection. Reservoir holes. TA46 B (Materials)

Metal oil filler and air breather filler caps. Bayonet connection. Reservoir holes. TA46 B (Materials) Metal oil filler and air Series T 46 4 5 6 4 ayonet connection Ø 46 7 8 46 Reservoir holes T46 (Materials) M5 - Cover: Chrome Plated Steel - Filter element: Impregnated paper Polyurethane 64-6 - Flange:

More information

Pressure independent balancing and control valve AB QM DN

Pressure independent balancing and control valve AB QM DN Data sheet Pressure independent balancing and control valve AB QM DN 10-250 The AB QM valve equipped with an actuator is a control valve with full authority and an automatic balancing function / flow limitation.

More information

Hilti North America Installation Technical Manual Technical Data MI System Version

Hilti North America Installation Technical Manual Technical Data MI System Version MIC-S10-AH-L 179517-1 Hilti North America Installation Technical Manual Technical Data MI System Version 1. 08.017 Terms of common cooperation / Legal disclaimer The product technical data published in

More information

Working pressure. 420 bar. Style T. Style B. Style D Style V Style Z. Style S B B D.I. D.I. D.I. D.I. D.I. D.I.

Working pressure. 420 bar. Style T. Style B. Style D Style V Style Z. Style S B B D.I. D.I. D.I. D.I. D.I. D.I. 5 FP SRIS FP Working pressure 40 bar Style S Style Style T Style D Style V Style Z 5 Technical data Filter body (Materials) ead: Cast iron (chemical heat treatment) ousing: Steel (chemical heat treatment)

More information

PARTS MANUAL 2 INCH CHIPPER/SHREDDER. SC cc SUBARU

PARTS MANUAL 2 INCH CHIPPER/SHREDDER.   SC cc SUBARU www.bearcatproducts.com 2 INCH CHIPPER/SHREDDER SC2170 170cc SUBARU PARTS MANUAL PN: 1641-00 Rev. 0011 Companion to 1509-00 Range: D01688 - Current Before You Begin DEAR ECHO BEAR CAT CUSTOMER Thank you

More information

E 094 E 103 E 143. Tank top mounting Connection up to G1 Nominal flow rate up to 135 l/min e

E 094 E 103 E 143. Tank top mounting Connection up to G1 Nominal flow rate up to 135 l/min e R e t u r n F i l t e rs E 094 E 103 E 143 Tank top mounting Connection up to G1 Nominal flow rate up to 135 l/min 20.30-5e D e s c r i p t i o n Application In the return line circuits of hydraulic systems.

More information

Safety valve with unit approval type MV..X.., SV..X..

Safety valve with unit approval type MV..X.., SV..X.. Safety valve with unit approval type MV..X.., SV..X.. Operating pressure p max = 0 bar Flow Q max = 0 lpm Safety valve type CMVX 2.. with unit approval see D 77 TÜV These safety valves are intended for

More information

Solenoid valves Type EVUL

Solenoid valves Type EVUL Data sheet Solenoid valves EVUL EVUL solenoid valves are designed to fit into compact refrigeration systems. Available in servo operated versions they can be applied in liquid, suction, and hot gas lines.

More information

Rotary Joints. Series DP

Rotary Joints. Series DP Rotary Joints Series DP Rotary Joints Series DP DP rotary joints are suitable for: hot and cold water modified design -00 for thermal oil Small Series also for hydraulic oil and compressed air high speeds

More information

M O D U L E - 3A Model A10V0 Piston Pump Manual A10V0 PUMP. Features

M O D U L E - 3A Model A10V0 Piston Pump Manual A10V0 PUMP. Features T E C H N I C A L I N F O R M A T I O N M A N U A L F O R T H E A 1 0 V 0 V A R I A B L E D I S P L A C E M E N T P U M P S A10V0 PUMP Features High Efficiency through load sensing (= fuel savings) Maximum

More information

Maximum pressure 420 bar Flow rate to 152 l/min. 560 bar. 140 l/min. Flow rate l/min FMM 050 1/2 1,50 3/4 1,00. Δp bar 0,50 0,00 FHA 051 1,50 1,00

Maximum pressure 420 bar Flow rate to 152 l/min. 560 bar. 140 l/min. Flow rate l/min FMM 050 1/2 1,50 3/4 1,00. Δp bar 0,50 0,00 FHA 051 1,50 1,00 FMM 00 Maximum pressure 0 bar Flow rate to l/min FHA 0 Maximum pressure 60 bar Flow rate to 0 l/min Technical data FMM 00 Filter housing (Materials) Head: Cast iron (chemical heat treatment) Housing: Steel

More information

PN LINE. PN Line. PX Line. PA Line. PU Line PX LINE. PV Line PA LINE & TUBINGS PU LINE PV LINE. Brass Push-in fittings

PN LINE. PN Line. PX Line. PA Line. PU Line PX LINE. PV Line PA LINE & TUBINGS PU LINE PV LINE. Brass Push-in fittings I NDEX PV LINE PX LINE PU LINE PA LINE & TUBINGS PN LINE Brass Push-in fittings Stainless Steel Push-in fittings Brass Standard fittings and Flexible Hoses Couplings and Multiple Connectors Function fittings

More information

AIR BREATHER FILTERS. Temperature from -25 C to +100 C

AIR BREATHER FILTERS. Temperature from -25 C to +100 C IR RETHER FILTERS The comprehensive series of breather filters makes it possible to meet all market demands. Metal and plastic styles suitable for use on mobile equipment are available. The function of

More information

ED 701 General Industry Pressure Transmitter

ED 701 General Industry Pressure Transmitter ED 701 General Industry Pressure Transmitter Standard industrial process connections Complete range of electrical connections 4... 20 ma and Voltage outputs Accuracy: 0.1%, 0.2% and 0.4% FS Quick response

More information

Made in Italy HOSE REELS CATALOGUE TECHNOLOGY FOR FLUIDYNAMICS. No. E14/A1

Made in Italy HOSE REELS CATALOGUE TECHNOLOGY FOR FLUIDYNAMICS. No. E14/A1 Made in Italy HOSE REELS CATALOGUE TECHNOLOGY FOR FLUIDYNAMICS No. E14/A1 The complete range of our products is presented in the specific catalogues: HOSE REELS CATALOGUE No. E14/A2 HOSE REELS CATALOGUE

More information

Laboratory Evaluation Report for: Dielectric Pipe Unions

Laboratory Evaluation Report for: Dielectric Pipe Unions American Society of Sanitary Engineering Seal (Certification) Program Laboratory Evaluation Report for: Dielectric Pipe Unions Tested under ASSE Standard 1079 Issued: September, 2005 Laboratory File Number

More information

Check-Q-meter. Table of contents. Features. Functions. RE 27551/ /10 Replaces: Type FD

Check-Q-meter. Table of contents. Features. Functions. RE 27551/ /10 Replaces: Type FD Check-Q-meter RE /0.0 /0 Replaces: 09.9 Type FD Nominal size... Series ax. Operating pressure 0 bar ax. Flow 0 l/min K9/ Table of contents Contents Page Features Functions Ordering details Symbols Functional

More information

Nylon oil filler and air breather filler caps

Nylon oil filler and air breather filler caps Series TP 0 Dimensions 6 Bayonet G / TP0 (Materials) - Cover/ringnut: Nylon - Filter element: Impregnated paper Polyurethane - Pressurisation valve: Nylon Galvanised Steel - Seal: Reservoir holes - Flange:

More information

Polígono Indutrial O Rebullón s/n Mos - España -

Polígono Indutrial O Rebullón s/n Mos - España - FP 5 Polígono Indutrial O Rebullón s/n. 646 - Mos - spaña - rodavigo@rodavigo.com SRIS FP Working pressure 40 bar Style S Style Style T Style D Style V Style Z 5 Polígono Indutrial O Rebullón s/n. 646

More information

Return fi lters. FRI series. Maximum pressure up to 20 bar - Flow rate up to 1500 l/min. Return fi lters

Return fi lters. FRI series. Maximum pressure up to 20 bar - Flow rate up to 1500 l/min. Return fi lters Return fi lters FRI series Maximum pressure up to 0 bar - Flow rate up to 500 l/min 9 Return fi lters FILTER SIZING The correct filter sizing have to be based on the variable pressure drop depending by

More information

Operating Instructions for Digital Manometer. Model: MAN-SD

Operating Instructions for Digital Manometer. Model: MAN-SD Operating Instructions for Digital Manometer Model: MAN-SD 1. Contents 1. Contents...2 2. Note...3 3. Instrument Inspection...3 4. Regulation Use...4 5. Operating Principle...4 6. Mechanical Connection...5

More information

/2" Heavy Duty Swing-Out

/2 Heavy Duty Swing-Out Premier Farnell Corporation. 0 All rights reserved. No portion of this can be reproduced without the express written consent of Premier Farnell Corporation. ISO 900 REGISTERED COMPANY We will not be responsible

More information

Bettis RGS F-Series. Quarter-Turn Spring-Return (SR) and Double-Acting (DA) Pneumatic Actuators. Product Data Sheet RGS Rev.

Bettis RGS F-Series. Quarter-Turn Spring-Return (SR) and Double-Acting (DA) Pneumatic Actuators. Product Data Sheet RGS Rev. Bettis RGS F-Series Quarter-Turn Spring-Return (SR) and Double-Acting (DA) Pneumatic Actuators Output Torques to 500,000 in-lb (56,492 N m) Ductile Iron or Stainless-Steel Construction Temperatures from

More information

Sta-Saf. System. The. BSBflamearrester.com BSBsystems.com Visit our website for the most complete, up-to-date information. Reverse Buckling Technology

Sta-Saf. System. The. BSBflamearrester.com BSBsystems.com Visit our website for the most complete, up-to-date information. Reverse Buckling Technology Catalog # 77-4001 The Sta-Saf System Reverse Buckling Technology BSBflamearrester.com BSBsystems.com Visit our website for the most complete, up-to-date information 1 Sta-Saf System The Sta-Saf system

More information

PiB Series. PiB (Pump-in-a-Box) 4380 & 4392 Series

PiB Series. PiB (Pump-in-a-Box) 4380 & 4392 Series PiB Series PiB (Pump-in-a-Box) & 9 Series FILE NO: - DATE: July SUPERSEDES: - DATE: January 09 PiB Series Guaranteed In Stock At The Right Price! The PiB series builds on the high quality and unsurpassed

More information

Calio-Therm NC Type Series Booklet

Calio-Therm NC Type Series Booklet High-efficiency Drinking Water Pump Type Series Booklet Legal information/copyright Type Series Booklet All rights reserved. The contents provided herein must neither be distributed, copied, reproduced,

More information

Fluid Cooling Industrial PF Series

Fluid Cooling Industrial PF Series Fluid Cooling Industrial PF Series 0916 STAINLESS STEEL PLATES CARBON STEEL FRAME Performance Notes Carry bar Gasketed plate style heat exchanger Tie rods Oil to water applications High performance Pressure

More information

HEAVY DUTY SWING-OUT VALVE

HEAVY DUTY SWING-OUT VALVE ISO 900 REGISTERED COMPANY Akron Brass Company. 20 All rights reserved. No portion of this can be reproduced without the express written consent of Akron Brass Company. We will not be responsible for:

More information

ARMYLOR PTFE / PFA LINED PIPES AND FITTINGS DIN 2848

ARMYLOR PTFE / PFA LINED PIPES AND FITTINGS DIN 2848 ARMYLOR PTFE / PFA LINED PIPES AND FITTINGS DIN 2848 CONTENT EXPERTISE p.1 MERSEN ANTICORROSION EQUIPMENT p.2 PTFE / PFA POLYMERS p.3 PTFE / PFA p.4 STEEL PARTS p.7 LINED COMPONENTS p.9 QUALITY CONTROL

More information

LES. Single-stage end-suction pumps Identification Type key

LES. Single-stage end-suction pumps Identification Type key Contents Singlestage endsuction pumps Identification Type key Product data Introduction Applications Features and benefits Performance range pole pole 6 pole Construction Sectional drawing Construction

More information

Pressure independent balancing and control valve AB QM DN

Pressure independent balancing and control valve AB QM DN Data sheet Pressure independent balancing and control valve AB QM DN 10-250 The AB QM valve equipped with an actuator is a control valve with full authority and an automatic balancing function / flow limitation.

More information

2.9. Namur Valves 2.9. page 175. Namur 1/4 also called Namur 1 in accordance to VDI / VDE Namur 1/2 also called Namur 2.

2.9. Namur Valves 2.9. page 175. Namur 1/4 also called Namur 1 in accordance to VDI / VDE Namur 1/2 also called Namur 2. 2.9 page 175 Namur 1/4 also called Namur 1 in accordance to VDI / VDE 3845. Namur 1/2 also called Namur 2. 2.9 Namur Valves + Selected models are available for low temperature application. Temperature-range:

More information

411 Steel Couplings. 411 Steel Couplings--Standard Length Sleeves 1/2 thru 12 Steel Pipe Sizes. Sleeve Thk. X Lgth. In.

411 Steel Couplings. 411 Steel Couplings--Standard Length Sleeves 1/2 thru 12 Steel Pipe Sizes. Sleeve Thk. X Lgth. In. Steel Couplings 0/0 Steel Couplings--Standard Length s 1/ thru Steel Pipe Sizes Nom. Pipe Size 1/ / 1 1 1 1/ Pipe.0 1.0 1. 1. 1.90.00.... Buna-N Gasket -000001-00 -00001-00 -00011-00 -00001-00 -00019001-00

More information

HEAVY DUTY SWING-OUT VALVE

HEAVY DUTY SWING-OUT VALVE ISO 900 REGISTERED COMPANY HEAVY DUTY SWING-OUT VALVE 52 53 23 5 2 2 3 28 39 NOT USED WITH SZ HANDLE 2 NOT USED WITH SZ HANDLE 5 2 3 7 9 9 Premier Farnell Corporation. 20 All rights reserved. No portion

More information

Conversion Kit for: 7620 and 7820 Swing-Out Valves ft-lbs ft-lbs 8835/ ft-lbs

Conversion Kit for: 7620 and 7820 Swing-Out Valves ft-lbs ft-lbs 8835/ ft-lbs ISO 900 REGISTERED COMPANY HEAVY DUTY SWING-OUT VALVE 52 53 23 5 2 2 3 28 39 NOT USED WITH SZ HANDLE 2 NOT USED WITH SZ HANDLE 5 2 3 7 9 9 Premier Farnell Corporation. 20 All rights reserved. No portion

More information

405 Compact Orifice Series and 1595 Conditioning Orifice Plate Flow Test Data Book and Flow Handbook

405 Compact Orifice Series and 1595 Conditioning Orifice Plate Flow Test Data Book and Flow Handbook Reference Manual 405 Compact Orifice Series and 1595 Conditioning Orifice Plate Flow Test Book and Flow Handbook www.rosemount.com Reference Manual 405 and 1595 405 Compact Orifice Series and 1595 Conditioning

More information

Flow rates to 485 l/min

Flow rates to 485 l/min FB Maximum pressure 0 bar Flow rates to 8 l/min Technical data Filter housing (Materials) ead: Cast iron (chemical heat treatment) ousing: Steel (chemical heat treatment) Bypass valve: Steel Check valve:

More information

Flow rates to 485 l/min

Flow rates to 485 l/min FB Maximum pressure 0 bar Flow rates to 8 l/min Technical data Filter housing (Materials) ead: Cast iron (chemical heat treatment) ousing: Steel (chemical heat treatment) Bypass valve: Steel Check valve:

More information

Its modular concept allows to build up a ball valve for any degree of automation and any kind of application

Its modular concept allows to build up a ball valve for any degree of automation and any kind of application Type 2657...59 DN 10 up to 80 mm; Plastic; 2/2 way dvantages/benefits ntegrated pilot valves, position feed-back and limit switches available Customized system solutions with Burkert valves & sensors With

More information

Edward C. Robison, PE, SE. 02 January Architectural Metal Works ATTN: Sean Wentworth th ST Emeryville, CA 94608

Edward C. Robison, PE, SE. 02 January Architectural Metal Works ATTN: Sean Wentworth th ST Emeryville, CA 94608 Edward C. Robison, PE, SE ks ATTN: Sean Wentworth 1483 67 th ST Emeryville, CA 94608 02 January 2013 SUBJ: 501 CORTE MADERA AVE, CORTE MADERA, CA 94925 BALCONY GUARD BASE PLATE MOUNTS The guards for the

More information

ZF Series Force Transducers

ZF Series Force Transducers Data Sheet Series Force Transducers FEATURES 1 kn to 00 kn High accuracy For tensile or pressure forces Made of stainless steel Enclosure protection IP 67 DESCRIPTION The force transducers of the series

More information

High Pressure fi lters. FMP 039 series. Maximum pressure up to 110 bar - Flow rate up to 80 l/min. High Pressure fi lters

High Pressure fi lters. FMP 039 series. Maximum pressure up to 110 bar - Flow rate up to 80 l/min. High Pressure fi lters High Pressure fi lters FMP 09 series Maximum pressure up to 0 bar Flow rate up to 80 l/min 7 High Pressure fi lters FILTER SIZING The correct filter sizing have to be based on the variable pressure drop

More information

405 Compact Orifice Series and 1595 Conditioning Orifice Plate Flow Test Data Book and Flow Handbook

405 Compact Orifice Series and 1595 Conditioning Orifice Plate Flow Test Data Book and Flow Handbook 405 Compact Orifice Series and 1595 Conditioning Orifice Plate Flow Test Book and Flow Handbook www.rosemount.com 405 Compact Orifice Series and 1595 Conditioning Orifice Plate Flow Test Book NOTICE Read

More information

FOR POLARIS ATV s P/N ASSEMBLY / OWNERS MANUAL

FOR POLARIS ATV s P/N ASSEMBLY / OWNERS MANUAL MID-MOUNT KIT FOR POLARIS ATV s P/N 15-3591 ASSEMBLY / OWNERS MANUAL Application PLOW PUSH FRAME NO. 15-0070, 33-0000 or 33-0070 Before you begin, please read these instructions and check to be sure all

More information

CoriolisMaster FCB430, FCB450, FCH430, FCH450 Coriolis mass flowmeter

CoriolisMaster FCB430, FCB450, FCH430, FCH450 Coriolis mass flowmeter Data Sheet DS/FCB400/FCH400-EN Rev. D CoriolisMaster FCB430, FCB450, FCH430, FCH450 Coriolis mass flowmeter High precision measurement of mass and volume flow, density, temperature and concentration with

More information

PRO-CLEAN STRATIFIED TANK

PRO-CLEAN STRATIFIED TANK PO-CLEAN STATIFIED TANK PODUCT DESCIPTION Pro-Clean stratified tank with spherical exchanger connection High-quality, multifunctional stratified tank made of steel (S J) for hot-water operation and domestic

More information

Catalog # The Sta-Saf System. Reverse Buckling Technology A SME

Catalog # The Sta-Saf System. Reverse Buckling Technology A SME Catalog #77-4001 The Sta-Saf System Reverse Buckling Technology A SME Sta-Saf System The Sta-Saf System includes 11 reverse buckling rupture disk models. These rupture disks offer the optimum performance

More information

S E G N A L F E IP P

S E G N A L F E IP P 9 8 PIPE FLANGES an excellence in engineering www.jbj.co.uk/ portflanges.html SAE standard, and 6, series flanges for screw or weld connection. Available for straight connection, fixed or swivel elbow

More information

PLOW MOUNT KIT FOR POLARIS RANGER P/N ASSEMBLY / OWNERS MANUAL

PLOW MOUNT KIT FOR POLARIS RANGER P/N ASSEMBLY / OWNERS MANUAL PLOW MOUNT KIT FOR POLARIS RANGER P/N 34-3010 ASSEMBLY / OWNERS MANUAL Application PLOW PUSH FRAME NO. 34-0000 or 34-0070 Before you begin, please read these instructions and check to be sure all parts

More information

THREADED CLOSURES. For access to Filter Vessels, Strainers, Pig Launchers & Receivers. Tube Turns Products

THREADED CLOSURES. For access to Filter Vessels, Strainers, Pig Launchers & Receivers. Tube Turns Products THREADED CLOSURES For access to Filter Vessels, Strainers, Pig Launchers & Receivers Tube Turns Products HISTORY Tube Turns was founded in 927 in Louisville, Kentucky, USA. We were the f i r s t A m e

More information

Flow rates to 485 l/min

Flow rates to 485 l/min FB Maximum pressure 0 bar Flow rates to 8 l/min Technical data Filter housing (Materials) ead: Cast iron (chemical heat treatment) ousing: Steel (chemical heat treatment) Bypass valve: Steel Check valve:

More information