UNIPOLE & MULTIPOLE CONNECTORS

Transcription

1 UIPOE & UTIPOE COECTORS

2 o reproduction or use without express permission of editorial or pictorial content, in any manner. Printed in Switzerland, 00 EO SA EO reserve the right at all times to modify and improve specifications without any notification. Pdf updated, April 0

3 EO unipole and multipole connectors This catalogue gives the complete description of EO unipole and multipole type connectors. The EO manufacturing programme has been extended to almost 0 series divided into product families with specific mating and environmental characteristics. Each series includes a wide variety of plug, socket, coupler and bridge plug models, available in contact configurations adapted to all round cables, including up to 0 conductors, and a maximum diameter of 0 mm. Watertight and vacuumtight models are also available. Since EO connectors are perfectly screened and designed to guarantee very low resistance to shell electrical continuity, they are particularly adapted to applications where electromagnetic compatibility (EC) is important. Table of Contents steps to select the right connector... B (indoor, keyed) Part umbering system... etal Housing models... Elbow socket models... Plastic housing models... Watertight and vacuumtight models... Bridge models...9 Threaded-latching models...0 Alignment Key and Polarized Keying System... K (outdoor, keyed) Part umbering system... etal Housing models... Watertight and vacuumtight models... Alignment Key and Polarized Keying System... B and K Insert configuration, Housings, Insulators, Contacts... S (indoor, stepped insert) Part umbering system... etal Housing models...8 Elbow socket models...8 Plastic housing models...0 E (outdoor, stepped insert) Part umbering system... etal Housing models... Watertight and vacuumtight models...8 (outdoor, stepped insert) Part umbering system...8 etal Housing models...8 Vacuumtight models...89 Alignment Key and Polarized Keying System...90 S, E and Insert configuration, Housings, Insulators, Contacts...9 G (indoor, keyed)...0 C (indoor, stepped insert)... D (indoor, concentric contacts)... Spare parts...0 Accessories... Tooling... Panel cut-outs... PCB drilling pattern... Cable assembly (B, K, S and E series)... Technical characteristics...

4 Precision modular connectors to suit your application Since it s creation in Switzerland in 9 the EO Group has been recognized as a global leader of circular Push-Pull connectors and connector solutions. Today EO and its affiliated companies, REDE and COEVER, are active in more than 80 countries with the help of over 0 subsidiaries and distributors. Over 000 connectors The modular design of the EO range provides over 000 connectors from miniature ø mm to ø 0 mm, capable of handling cable diameters up to 0 mm and for up to 0 contacts. This vast portfolio enables you to select the ideal connector configuration to suit almost any specific requirement in most markets, including medical devices, test and measurement instruments, machinery, audio video broadcast, telecommunications and military. EO s Push-Pull Self-atching Connection System This self-latching system is renowned worldwide for its easy and quick mating and unmating features. It provides absolute security against vibration, shock or pull on the cable, and facilitates operation in a very limited space. The EO self-latching system allows the connector to be mated by simply pushing the plug axially into the socket. Once firmly latched, connection cannot be broken by pulling on the cable or any other component part other than the outer release sleeve. When required, the connector is disengaged by a single axial pull on the outer release sleeve. This first disengages the latches and then withdraws the plug from the socket. U Recognition EO connectors are recognized by the Underwriters aboratories (U). The approval of the complete system (EO connector, cable and your equipment) will be easier because EO connectors are recognized. CE marking CE marking means that the appliance or equipment bearing it complies with the protection requirements of one or several European safety directives. CE marking applies to complete products or equipment, but not to electromechanical components, such as connectors. RoHS EO connector specifications conforms the requirements of the RoHS directive (0//EU) of the European Parliament and the latest amendments. This directive specifies the restrictions of the use of hazardous substances in electrical and electronic equipment marketed in Europe.

5 steps to select the right connector Step : Select connector series Select the appropriate EO connector series according to the environmental parameters that will affect your device or cable such as indoor, outdoor, temperature range, ingress protection of the mated connector and of your device. Use the table shown on page. Part number coding... B, K, S, E,, G, C or D Step : Select connector size Use the section (mm ) or the AWG of your cable wire to select the optimal contact diameter (values vary between solder, crimp or print contact), see page. Use this optimal contact diameter to determine the right connector size as well as the insert configuration, see page. Part number coding... 0,,,,, or Step : Complete the part number ow that you know the series, as well as the insulator configuration, complete the part numbering system with the help of the following table. Part number coding... Insert Housing Insulator configuration material material Contact Collet Variant B (indoor, keyed) K (outdoor, keyed) S (indoor, stepped insert) E (outdoor, stepped insert) (outdoor, keyed, stepped insert) G (indoor, keyed) C (indoor, stepped insert) D (indoor, concentric contacts) ote: Figures in the above table refer to the catalogue pages.

6 Step : Select Connector EO unipole and multipole connectors The standard keyed (B, 00, G) The characteristic feature of these connector series is a keying system which allows higher contact density and prevents all errors in alignment. The various keying alternatives prevent unwanted cross mating of otherwise similar connectors. It is also possible to use crimp contacts to reduce cable assembly time. These connector series, include the 0B to B range as well as the 00 multipole and G (shortened version of the B series), some vacuumtight models are also available. The watertight keyed (K, ) These series are watertight when mated and assembled to an appropriate cable. They include the 0K to K series, available in the same types as the 0B to B series, and the 0 to series with keying and hermaphroditic insulator. The standard (S, 00, C, D) The characteristic feature of these connector series is the hermaphroditic insulator in the multipole version. They include principally the 0S to S series, as well as the 00 unipole series, the C (shortened version) and the D quadrax type (with concentric contacts). The watertight (E) These series are watertight when mated and assembled to an appropriate cable. They include the 0E to E series and are available in the same types as the S series. Environment Ingress ) protection Ingress ) protection Temperature range atching 00 multipole B K 00 unipole S indoor outdoor or indoor harsh env. outdoor or harsh environment IP0 IP to IP8 IP0 IP to IP8 IP0 to IP8 vacuumtight IP to IP8 vacuumtight IP0 to IP8 vacuumtight E G C D IP to IP8 vacuumtight - to 0 C - to 00 C - to 0 C - to 00 C - to 0 C - 0 to 0 C Push-Pull self-latching IP0 indoor IP0 IP0 to IP8 vacuumtight IP0 Shell sizes Insulator type Contact type Features 8 metal and plastic ultipole metal Solder, crimp or print metal and plastic Unipole or multipole hermaphroditic Solder, crimp or print keyways 9 keyways Stepped insert metal metal metal metal ultipole hermaphroditic Solder, crimp or print Stepped insert ultipole keyway Solder or print ultipole hermaphroditic Stepped insert Quadrax Solder concentric contacts Page 9 to to to to 8 8 to to to to 8 ote: ) ated connector. See ingress protection code page. ) Your device. For selection of connectors for watertight and vacuumtight devices, see page.

7 Definition of Ingress Protection (IP code) IEC 09 outlines an international classification system for the sealing effectiveness of enclosures of electrical equipment against the intrusion into the equipment of foreign bodies (i.e. tools, dust, fingers) and moisture. This classification system utilizes the letters «IP» (Ingress Protection) followed by two digits. Degrees of protection - First digit The first digit of the IP code indicates the degree to which persons are protected against contact with moving parts and the degree that equipment is protected against solid foreign bodies intruding into an enclosure. Example: IP 0 = IP 0 IP letter code st digit nd digit Degrees of protection - Second digit The second digit indicates the degree of protection of the equipment inside the enclosure against the harmful entry of various forms of moisture (e.g. dripping, spraying, submersion, etc.) Code First digit description Code Second digit description 0 o special protection 0 o special protection Protection from a large part of the body such as hand or from solid objects greater than 0 mm in diameter Protection from vertically dripping water Protection against objects not greater than 80 mm in length and mm in diameter Protection from dripping water when tilted up to Protection from entry by tools, wires, etc., with a diameter or thickness greater than. mm Protection from sprayed water Protection from entry by solid objects with a diameter or thickness greater than.0 mm Protection from splashed water Protection from the amount of dust that would interfere with the operation of the equipment Protection from water projected from a nozzle Dust-tight Protection against heavy seas, or powerful jets of water Protection against temporary immersion 8 8 Protection against complete continuous submersion in water Selection of connectors for watertight or vacuumtight devices EO B and S series are rated IP0 only when mated. EO E, K and series are rated IP (and over) only when mated. If a device must be watertight or vacuumtight when the connectors are unmated, it is important to select a watertight or vacuumtight socket. You can consider the following two situations: A) Figure shows a typical outdoor device. To ensure this device retains IP or above when connectors are unmated, it is important to choose a watertight socket from B, S, E, K or series. B) Figure shows a device which is subjected to pressure difference such as a near vacuum or pressurized gas and must exhibit no leakage. To ensure the device maintains its sealing, the socket is additionally tested for helium leakage (according I A). Fig. Fig. your device your device epoxy resin seal FGG plug K series EGG socket K series FGG plug B series HGG socket B series Check temperature range (see section on pages,,, 8 and 89).

8 Step : Select Connector Size Select the right connector size and insert configuration To be able to select the right connector size (0 to ), it is important to define the contact diameter (). Find out the available contact diameter () of the EO connector depending on the number of contacts required and depending on the rating required (see pages to 9 and 9 to 98). The following table shows the contact diameter (), or the solder pot diameter (ø C) for the D series. umber of contacts Insert configuration 00 0B-0K B-K XB B-K B-K B-K B-K 00 0S-0E-0 ) S-E- ) S-E- ) S-E S-E S-E S-E G Unipole C ultipole D (ø C) / /0...0/..0/.0.0/ /0.9..0/ / / / / / ) ote: ) series not available in unipole version. ).0 is for S series, for E the values are. and.0.

9 Verify the fitting to your wire Verify if the selected contact diameter () of the EO connector fits to your cable wire diameter (AWG number or max. available section). Contact type Contact ø C Form (mm) (mm) per fig. AWG max. Solid Section max. (mm ) Conductor Stranded AWG Section (mm ) min. max. min. max. F r ) () ote fig. fig. Solder ) 0.0 ) ) 0. ) 0.0 ) ø C )..00. ø C Crimp ø C ø C ø C ø C 0. ) ) 0. ) 0. ) )) 0. ) ) ) ) ) ) ) ) Print ø C ø C dimensions and C are detailed in the section on PCB drilling pattern. See page and 9. Print (elbow) dimensions and C are detailed in the section on PCB drilling pattern. See page and 0. ø C ote: ) contact retention force in the insulator (according to IEC 0-8 test a). ) for 00 multipole series. ) for S, E, C, G and D series. ) for a given AWG, the diameter of some stranded conductor designs is larger than the solder cup diameter. ake sure that the maximum conductor diameter is smaller than ø C. ) for 00 multipole series or for 0B and B series with male contacts. ) for 0B.0/0B.0 and 0K.0/0K.0 ø C =.0 mm, AWG max 0, section max (mm ) 0.0. ) for 00 and B/K series, according to manufacturing and plating tolerance ø C min = 0. mm.

10 Verify the fitting to your cable Verify if the selected connector size fits to your cable diameter. Cable diameter range (mm) Cable diameter range (mm) Cable diameter range (mm) Collet Collet for fitting a bend relief min. max. min. max. Collet Collet for fitting a bend relief min. max. min. max. Collet Collet for fitting a bend relief min. max. min. max. 00 ) 0B B XB B B B B 0K K K K K K ) ) )..0.. ) ) 0S S S S S S S 0E E E E E E E ) ) )..0.. ) ) ). 0. C G D ote: ) for multipole only. ) for unipole only. ) for these series the maximum cable diameter require models with oversized cable collet (type K). 8

11 B SERIES K SERIES (watertight)

12 B B series connectors provide the following main features: security of the Push-Pull self-latching system multipole types to contacts solder, crimp or print contacts (straight or elbow) high packing density for space savings multiple key options to avoid cross mating keying system («G» key standard) of similar connectors for connector alignment 0 screening for full EC shielding. etal housing models (page ) Fixed plugs Straight plugs Fixed sockets Free sockets FWG FGG EGG ECG PHG FAG FGG EG ECG PHG Elbow plugs JGG EKG EZG PG FPG Fixed sockets FFG ESG EYG PKG FHG FG EHG XPF Fixed coupler PFG FEG EJG FG FDG EEG R PEG FKG FIG EFG Elbow socket models (page ) Elbow sockets ECG EPG XBG, EXG Plastic housing models (page ) Straight plugs Fixed sockets Bridge models (page 9) Plug with two Bridge plugs parallel sockets FGG FGG EG FTG FGY FGY EY CFF, CRG Watertight or vacuumtight models (page ) Fixed Fixed sockets plug Fixed coupler Threaded-latching models (page 0) Straight plugs Fixed socket HGG HHG HEG FVG ESG Elbow socket YHG S HG HCG HG FVB XRB 0

13 Part umbering System Plug FG G. B. 0. C A D Free socket PH G. B. 0. C D Z Variant: (page ) Cable ø: (page ) Collet type: (page ) Fixed socket EG G. B. 0. C Y Coupler RJ G. B. 0. C A : (page ) Alignment key: (page ) : (page ) Insert configuration: (page ) Variant: (page ) Contact: (page 0) Insulator: (page 0) Housing: (page 0) Part umber Example Straight plug with cable collet: FGG.B.0.CAD = straight plug with key (G) and cable collet, B series, multipole type with contacts, outer shell in chrome-plated brass, PEEK insulator, male solder contacts, D type collet for.0 mm diameter cable. Free socket: PHG.B.0.CDZ = free socket with key (G) and cable collet, B series, multipole type with contacts, outer shell in chrome-plated brass, PEEK insulator, female solder contacts, D type collet for.0 mm diameter cable and nut for fitting a bend relief. Fixed socket: EGG.B.0.CY = fixed socket, nut fixing, with key (G), B series, multipole type with contacts, outer shell in chromeplated brass, PEEK extended insulator, female crimp contacts. Fixed coupler: RJG.B.0.CA = straight fixed coupler with keys (J) at the flange end and key (G) at the other end, B series, multipole type with contacts, outer shell in chrome-plated brass, PEEK insulator, male-female contacts. Part Section Showing Internal Components Fixed socket Straight plug outer shell earthing crown retaining ring hexagonal nut locking washer insulator female contact outer shell latch sleeve collet nut split insert carrier insulator male contact collet

14 etal housing models Technical Characteristics echanical and Climatical Electrical Characteristics Value Standard Characteristics Value Standard Endurance Humidity Temperature range Resistance to vibration Shock resistance Salt spray corrosion test Protection index (mated) Climatical category > 000 cycles IEC 0- test 9a up to 9% at 0 C - C, +0 C Hz, g IEC 0- test d 00 g, ms IEC 0- test c > 000h IEC 0- test f IP0 IEC 09 // IEC 008- Shielding efficiency at 0 Hz at GHz > db IEC 09-- > 0 db IEC 09-- ote: the various tests have been carried out with FGG and EGG connector pairs, with chrome-plated brass shell and PEEK insulator. Detailed electrical characteristics, as well as materials and treatment are presented in the chapter Technical Characteristics on page. FGG Straight plug, key (G) or keys (A and R), cable collet A S S S ~ S ~ FGG 00 ) FGG 0B FGG B FGG XB FGG B FGG B FGG B FGG B Cable assembly (page ) ote: ) the surface design of the 00 series is different. FGG Straight plug, key (G) or keys (A ), cable collet and nut for fitting a bend relief ) A S S ~ ~ FGG 00 ) FGG 0B FGG B FGG XB FGG B FGG B FGG B Cable assembly (page ) S S ote: ) the surface design of the 00 series is different. ) to order, add a «Z» at the end of the reference. The bend relief must be ordered separately (see page ). JGG Straight plug, short version, key (G), cable collet ~ ~ A S S JGG 0B Cable assembly (page ) S S

15 FFG Straight plug, non-latching, key (G) or keys (A ), cable collet A S S ~ ~ FFG FFG FFG FFG FFG 0B B B B B S S Cable assembly (page ) FG Straight plug, key (G) or keys (A and R), cable collet and lanyard release A B S S ~ ~ FG FG FG FG FG FG 0B B B B B B B Cable assembly (page ) ote: cable material: stainless steel with Polyamide sheath. S S FEG Straight plug, key (G) or keys (A ), cable collet, front seal and nut for fitting a bend relief ) (IP protection index when mated) ~ A S S ~ FEG FEG FEG FEG 0B B B B Cable assembly (page ) S S ote: ) to order, add a «Z» at the end of the reference. The bend relief must be ordered separately (see page ). FDG Straight plug, long version, key (G) or keys (A ), cable collet ~ A S S ~ FDG FDG B B Cable assembly (page ) S S

16 FIG Straight plug for remote handling, key (G) or keys (A and R), special alignment mark, knurled handling surface, cable collet A S S S ~ ~ FIG FIG FIG FIG B B B B S S S Cable assembly (page ) FWG Fixed plug, nut fixing, key (G) or keys (A ) maxi S A B e E ) S S e FWG FWG FWG FWG 0B B B B.0. 9x x x x E maxi S P9 Panel cut-out (page ) ote: ) maximum length with crimp contacts FAG Fixed plug, non-latching, nut fixing, key (G) or keys (A and R) e S E maxi maxi S FAG 00 FAG 0B FAG B FAG B FAG B FAG B FAG B A B e E ) S S 8 0. x x x x x x x P Panel cut-out (page ) ote: ) maximum length with crimp contacts. The B series is delivered without locking washer or tapered washer and with a round nut. FPG Elbow (90 ) plug, key (G) or keys (A and R), cable collet S A H S S S ~H S S FPG 00 FPG 0B FPG B FPG B Cable assembly (page )

17 FHG Elbow (90 ) plug, key (G) or keys (A and R), cable collet S A D H S S S ~H S S FHG FHG FHG B B B D Cable assembly (page ) S FG Elbow (90 ) plug, key (G) or keys (A ), cable collet and lanyard release, long key ) ~H S A B H S S S S FG FG 0B B B Cable assembly (page ) ote: ) long key: only in 0B series and with key (G). Cable material: stainless steel with Polyamide sheath. S FKG Elbow (90 ) plug for remote handling, key (G) or keys (A ), special alignment mark, knurled handling surface, cable collet ~H S S S FKG FKG FKG B B B A H S S S S Cable assembly (page ) ote: dimension D is the same as for the FHG model. EGG Fixed socket, nut fixing, key (G) or keys (A and R) maxi A B e E ) S S e S E maxi S EGG 00 EGG 0B EGG B EGG XB EGG B EGG B EGG B EGG B 8 0. x x x x x x x x P Panel cut-out (page ) ote: ) maximum length with crimp contacts. The B series is delivered with a tapered washer and a round nut.

18 EG Fixed socket with earthing tag, nut fixing, key (G) or keys (A ) maxi A B e E ) S S e S E maxi S EG 00 EG 0B EG B ) EG B EG B EG B 8 0. x x x x x x P Panel cut-out (page ) ote: ) maximum length with crimp contacts. ) for the B series the earthing tag is on the same side of the key. EKG Fixed socket, nut fixing, key (G) or keys (A and R), special alignment mark on the front maxi S A B e E ) S S e EKG EKG EKG EKG B B B B 8 9. x x x x E maxi S P Panel cut-out (page ) ote: ) maximum length with crimp contacts. The B series is delivered with a tapered washer and a round nut. ESG Fixed socket with two round nuts, key (G) or keys (A ), long threaded shell (back panel mounting) maxi. mini A B C e E ) S ø C e ESG 00 ESG B x x E maxi S P Panel cut-out B series (page ) P Panel cut-out 00 series (page ) ote: ) maximum length with crimp contacts. EHG Fixed socket, nut fixing, key (G) or keys (A and R), and protruding shell maxi A B e E ) S S e S E maxi S EHG 00 EHG 0B EHG B EHG B EHG B EHG B x x x x x x P Panel cut-out (page ) ote: ) maximum length with crimp contacts. The B series is delivered without locking washer or tapered washer and with a round nut.

19 EJG Fixed socket, press or adhesive fit, key (G) or keys (A ) maxi A B ) EJG EJG EJG 0B B B P Panel cut-out (page ) ote: ) maximum length with crimp contacts. EEG Fixed socket, nut fixing, key (G) or keys (A and R) (back panel mounting) maxi A B e E ) P S S S P e EEG 00 EEG 0B EEG B EEG B EEG B EEG B 0 9. x x x x x x S E maxi P Panel cut-out (page ) ote: ) maximum length with crimp contacts. The B and B series are delivered with a conical nut. The B series is delivered without locking washer or tapered washer. maxi EFG Fixed socket, nut fixing, key (G) or keys (A ), with two flats on the shell and O-ring (back panel mounting) P e A B e E ) P S EFG 0B. 9x S E maxi P Panel cut-out (page ) ote: ) maximum length with crimp contacts. ECG Fixed socket with two nuts, key (G) or keys (A and R) (back panel mounting) e S maxi S E maxi ECG 00 ECG 0B ECG B ECG XB ECG B ECG B ECG B ECG B A B e E ) S S 0 0. x x x x x x x x P Panel cut-out (page ) ote: ) maximum length with crimp contacts. The B, B and B series are delivered with a conical nut. The B series is delivered with a tapered washer and a round nut.

20 ECG Fixed socket with two nuts, key (G) or keys (A F and R) and straight contact for printed circuit (back panel mounting) e S S E maxi ECG 00 ECG 0B ECG B ECG XB ECG B ECG B ECG B ECG B A B e E S S 0 0. x x x x x x x x P Panel cut-out (page ) P PCB drilling pattern (page ) ote: this contact type is available for E socket models fitted with female contacts. ength depends on the number of contacts, see table on page. The B series is delivered with a tapered washer and a round nut. The B, B and B series are delivered with a conical nut. ECG Fixed socket with two nuts, key (G) or keys (A F) with elbow (90 ) contact for printed circuit (back panel mounting) S S A B e E S S max 0 mini E maxi e ECG ECG ECG ECG 0B B B B P Panel cut-out (page ). 9x x x x P PCB drilling pattern (page ) ote: this female contact type is available for all back panel mounting socket models. ength depends on the number of contacts, see PCB drilling pattern on page. For male contacts, sockets are available upon request, with J, K or keys. The B series is delivered with a conical nut. EZG Straight socket for printed circuit, key (G) or keys (A, B) B H A B H K ø 0. ø 0. EZG P + P PCB drilling pattern (pages and ) K EZG Straight socket for printed circuit, key (G) or keys (A F) B A B H K. H EZG EZG EZG 0B B B P + P PCB drilling pattern (pages and ) K ote: ength depends on the number of contacts, see table on page. 8

21 EYG Fixed socket for printed circuit, nut fixing, key (G) or keys (A F) (back panel mounting) A B C D e E P S. 9 S P B D EYG EYG EYG 0B B B 0.. 9x x x P Panel cut-out 0B and B series (page ) ø C e P0 Panel cut-out B series (page ) E maxi P + P PCB drilling pattern (pages and ) ote: ength depends on the number of contacts, see page. XPF Fixed socket, nut fixing, long shell, keys (F) for printed circuit (back panel mounting) P.08 XPF 0B A B e E P R 9x e P Panel cut-out (page ) P + P PCB drilling pattern (pages and ) R E maxi ote: ength depends on the number of contacts, see table on page. PHG Free socket, key (G) or keys (A and R), cable collet A S S S S ~ PHG 00 ) PHG 0B PHG B PHG XB PHG B PHG B PHG B PHG B Cable assembly (page ) ote: ) the surface design of the 00 series is different. PHG Free socket, key (G) or keys (A ), cable collet and nut for fitting a bend relief ) A S S S S ~ PHG 00 ) PHG 0B PHG B PHG XB PHG B PHG B PHG B Cable assembly (page ) ote: ) the surface design of the 00 series is different. ) to order, add a «Z» at the end of the reference. ote: The bend relief must be ordered separately (see page ). 9

22 PG Free socket, nut fixing, key (G) or keys (A and R), cable collet with lanyard release A B S S ~ PG PG PG PG PG B B B B B B Cable assembly (page ) ote: cable material: stainless steel with Polyamide sheath S S PKG Fixed socket, nut fixing, key (G) or keys (A and R), cable collet A B e E S S S ~ e S PKG 00 PKG 0B PKG B PKG B PKG B PKG B PKG B 8 0. x x x x x x x P Panel cut-out (page ) S E maxi S Cable assembly (page ) ote: the B series is delivered with a tapered washer and a round nut. PFG Fixed socket, with two nuts, key (G) or keys (A and R), cable collet (back panel mounting) A B e E S S S ~ e S PFG 00 PFG 0B PFG B PFG B PFG B PFG B PFG B 0 0. x x x x x x x P Panel cut-out (page ) S S E maxi Cable assembly (page ) ote: the B, B and B series are delivered with a conical nut. The B series is delivered with a tapered washer and a round nut. 0

23 PEG Fixed socket, nut fixing, key (G) or keys (A ), cable collet (back panel mounting) ~ P A B e E S S S P S PEG PEG B B 8x x R Fixed coupler, nut fixing, key (G) or keys (A and J) at the flange end and keys (J, K or ) at the other end S e e P Panel cut-out (page ) S E maxi S Cable assembly (page ) ote: the B series has an o-ring on the flange. E maxi S Contacts G RGG G Type A B e E S S J RJG G G RGJ J A RAK K G RG Example RGG ) RGG ) RJG RGJ RAK RG RGG ) RJG RGJ RJG RGJ RGJ RGJ 0B 0B 0B B B B B B female female.8 0x female female.8 0x male female female male female male.8 0x female male female female 9. x male female female male 9. x male female female male 0. x female male.0 0x female male.0 x RGJ Plug with key G Plug with key J Alignment key see page. P Panel cut-out (page ) ote: ) only available with two contacts. ) RGG.0B only available from till contacts. ) RGG.B only available till contacts. For this fixed coupler, the first contact type mentioned is always the one at the flange end. On request, these couplers can be produced in other series, with other keys.

24 Technical Characteristics Types Type 00 0B, B B, B 0B, B 0B, B 0B, B 0B, B B 0B 9 B aterials and Treatment Housing etallic parts Earthing crown Insulator Female contact Component aterial EPG-XBG 00 EPG-EXG 0B EPG-EXG 0B EPG-EXG 0B EPG-EXG 0B EPG-EXG 0B EPG-EXG 0B EPG-EXG 0B EPG-EXG B EPG-EXG B EPG-EXG B EPG-EXG B EPG-EXG B EPG-EXG B EPG-EXG B EPG-EXG B EPG B Surface treat. (µm) Cu i Au PPS Brass 0. Brass 0. Bronze 0. PEEK Bronze 0.. ote: The surface treatment standards are as follows: ickel: SAE AS QQ 90. Gold: ISO 8 Electrical Types Test voltage (kv rms)) Contact-contact Test voltage (kv rms)) Contact-shell Rated current (A)) ote: ) see calculation method, caution and suggested standard on page 8. EPG Elbow (90 ) socket for printed circuit, key (G) or keys (A F) (solder or screw fixing) I Elbow socket models ote: numbering sequence shown is for female contacts (G keying), for inverted contacts please contact factory.. K EPG.B.. A D H I K.. 9. P0 PCB drilling pattern (page 8) H ø 0. ø 0.. D ote: to replace the ground pins by screws (.) add an «S» to the end of the part number. (e.g.: EPG.B..S)

25 .0 (00). (0B-B) I EPG Elbow (90 ) socket for printed circuit, key (G) or keys (A F) (solder or screw fixing) I A D H I K R H ø 0. R. ø 0. (00) ø 0. (0B-B) K D EPG.00.0.H EPG.00.0.H EPG.00.0.H EPG.0B.0.H EPG.0B.0.H EPG.0B.0.H EPG.0B.0.H EPG.0B.0.H EPG.0B.0.H EPG.0B.09.H EPG.B.0.H EPG.B.0.H EPG.B.0.H EPG.B.0.H EPG.B.0.H EPG.B.0.H EPG.B.08.H EPG.B.0.H P8 PCB drilling pattern 00 series (page 8) P9 PCB drilling pattern 0B, B series (page 8) ote: In the 0B and B series, it is possible to replace the ground pins by screws (.) add an «S» to the end of the part number. (e.g.: EPG.0B.0.HS) EXG Elbow (90 ) socket for printed circuit with two nuts, key (G) or keys (A F) (solder or screw fixing) (back panel mounting) XBG Elbow (90 ) socket fixing nut for printed circuit, key (G) or keys (A, B) (back panel mounting) A B D e E H I K R S.0 (00). (0B-B) H R. ø 0. (00) ø 0. (0B-B) K S E maxi D e XBG.00.0.H XBG.00.0.H XBG.00.0.H EXG.0B.0.H EXG.0B.0.H EXG.0B.0.H EXG.0B.0.H EXG.0B.0.H EXG.0B.0.H EXG.0B.09.H EXG.B.0.H EXG.B.0.H EXG.B.0.H EXG.B.0.H EXG.B.0.H EXG.B.0.H EXG.B.08.H EXG.B.0.H x x x ote: In the 0B and B series, it is possible to replace the ground pins by screws (.) add an «S» to the end of the part number. (e.g.: EXG.0B.0.HS). P Panel cut-out 00, 0B series (page ) P0 Panel cut-out B series (page ) P8 PCB drilling pattern 00 series (page 8) P9 PCB drilling pattern 0B, B series (page 8)

26 Plastic housing models These connectors are particularly recommended for all applications requiring maximum electrical insulation when mated. The design, including a latch sleeve and a metal earthing crown, guarantees EC screening efficiency to meet most requirements. Technical Characteristics echanical and Climatical Characteristics Colour Endurance Humidity Temperature range Sterilization resistance ) Resistance to solvents Value PEEK PSU PPSU Standard natural (beige) white or grey cream > 000 cycles > 000 cycles > 000 cycles IEC 0- test 9a up to 9% at 0 C - 0 C/+0 C - 0 C/+0 C - 0 C/+80 C > 00 cycles ~0 cycles > 00 cycles IEC 00-. very good limited good ote: ) Steam sterilization FGG Straight plug, key (G or J), cable collet, PEEK outer shell ~ ~ FGG FGG FGG B B B Cable assembly (page ) A S S FGG Straight plug, key (G or J), cable collet, PEEK outer shell and nut for fitting a bend relief ) ~ ~ FGG B FGG B A S ote on availability for all collet type only from collet 8 and up Cable assembly (page ) S ote: ) to order, add a «Z» at the end of the reference. The bend relief must be ordered separately (see page ). FGY Straight plug, keys (Y), cable collet and PSU or PPSU outer shell A S ~ ~ FGY FGY FGY B B B Cable assembly (page ) S

27 FGY Straight plug, keys (Y), cable collet and PSU or PPSU outer shell and nut for fitting a bend relief ) A S ote on availability ~ ~ FGY FGY FGY B B B only for collet and up only for collet D and up only for collet 8 and up Cable assembly (page ) S ote: ) to order, add a «Z» at the end of the reference. The bend relief must be ordered separately (see page ). EG Fixed socket with earthing tag, nut fixing, key (G or J), PEEK outer shell maxi S A B e E ) S S e EG EG EG B B B.8 x x x E maxi S P Panel cut-out (page ) ote: ) maximum length with crimp contacts. EY Fixed socket with earthing tag, nut fixing, keys (Y), PSU or PPSU outer shell maxi S A B e E ) S S e EY EY EY B B B 8 9. x x x E maxi S P Panel cut-out (page ) ote: ) maximum length with crimp contacts. ote: other models with plastic outer shell are available on request.

28 Watertight or vacuumtight models These plug, socket and coupler models allow the device on which they are fitted to reach a protection index of IP8 as per IEC 09. They are fully compatible with plugs of the same series and are widely used for portable radios, military, laboratory equipment, aviation, etc. These models are identified by a letter «P» at the end of the reference. ost of these models are also available in a vacuumtight version. Such models are identified by an additional letter «V» at the end of the part number (certificate on request). Epoxy resin is used to seal these models. Technical Characteristics echanical and Climatical Characteristics Value Standard Characteristics Value Standard Endurance Humidity Temperature range (00 to B) Temperature range (B to B) Salt spray corrosion test Climatical category eakage rate (He) ) > 000 cycles IEC 0- test 9a up to 9% at 0 C - 0 C/+00 C - 0 C/+80 C > 000h IEC 0- test f 0/80/ IEC 008- < 0 - mbar.l.s - IEC 0- test b aximum operating pressure ) 00 0B B B B B B 0 bar 0 bar 0 bar 0 bar IEC 0- test d 0 bar bar bar ote: ) only for vacuumtight models. ote: ) this value corresponds to the maximum allowed pressure difference for the assembled socket. YHG Fixed plug, nut fixing, non-latching, key (G) or keys (A ) maxi S A B e E S S e YHG YHG YHG YHG 0B B B B.0. 9x x x x E maxi S P9 Panel cut-out (page ) ote: this model does not include an O-ring behind the flange, it ensures only IP protection index. Consequently, it is not vacuumtight. Watertightness (when mated) is only ensured with HHG and HCG sockets. HGG Fixed socket, nut fixing, key (G) or keys (A and R), watertight or vacuumtight S maxi A B e E S S e E maxi S HGG 00 HGG 0B HGG B HGG B HGG B HGG B HGG B 0. x x x x x x x P9 Panel cut-out (page ) ote: the B series is delivered with a tapered washer and a round nut.

29 HG Fixed socket, nut fixing, with earthing tag, key (G) or keys (A ), watertight or vacuumtight maxi S A B e E S S HG 0B. 9x e P9 Panel cut-out (page ) E maxi S HHG Fixed socket, nut fixing, key (G) or keys (A ), watertight or vacuumtight (watertight when mated) maxi A B e E S S e S HHG HHG HHG HHG 0B B B B. 9x x x x P9 Panel cut-out (page ) E maxi S ote: this model ensures watertightness (IP) in the mating area when mated with FGG or similar plug. HCG Fixed socket, nut fixing, key (G) or keys (A ), watertight or vacuumtight (watertight when mated) (back panel mounting) F maxi maxi P HCG HCG HCG 0B B B A B C e e E F P S x.0 9x x.0 x x.0 x ø C e e P Panel cut-out (page ) S E maxi ote: this model ensures watertightness (IP) in the mating area when mated with FGG or similar plug. HEG Fixed socket, nut fixing, key (G) or keys (A ), watertight or vacuumtight (back panel mounting) maxi A B e E P S S S S P HEG 00 HEG 0B HEG B HEG B 0 x x x x e P9 Panel cut-out (page ) E maxi

30 HG Fixed socket with earthing tag, nut fixing, key (G) or keys (A ), watertight or vacuumtight (back panel mounting) maxi P S A B e E P S E maxi e HG 00 HG 0B HG B HG B ) HG B 0 x x x x x P9 Panel cut-out (page ) ote: ) the surface design of the B series is different. The B series is delivered with a conical nut. S Fixed coupler, nut fixing, key (G) or keys (A, B, J, K and ) at the flange end and key (G) or keys (A, B, J, K and ) at the other end, watertight or vacuumtight S S e E maxi Contacts Type A B e E S S G SGJ J Example J SJG G K SKA A SB B A SAK K B SB SGJ SJG SGJ SJG SGJ SJG SGJ SJG SAK SB SAK SB SGJ SJG SGJ SJG SKA SB SAK SB 0B B B B B B female male male female female male male female female male male female female male male female female male female male female male female male female male male female female male male female male female male female female male female male.8 0x x x x x x SGJ P Panel cut-out (page ) Plug with key G Plug with key J P9 Panel cut-out B series (page ) Alignment key see page. ote: for this fixed coupler, the first contact type mentioned is always the one at the flange end. On request these couplers can be produced in other series, with other keys. The B series is delivered with a round nut. 8

31 Bridge models Technical Characteristics echanical and Climatical Characteristics Value Standard Electrical Characteristics Value Standard Endurance Working temperature > 000 cycles IEC 0- test 9a maximum 90 C Contact resistance < mω IEC 0- test a aterials and Treatment Plastic housing etallic parts Component Insulator ale contact Female contact aterial Surface treat. (µm) Cu i Cr Au Polyamide Brass 0. Brass PEEK Brass 0..0 Bronze 0.. ote: the surface treatment standards are as follows: ickel: SAE AS QQ 90, chrome: SAE AS 0, gold: ISO 8 CFF CRG CFF.0B.0.PCG CRG.0B.0.PEG CFF.0B.0.PCG CRG.0B.0.PEG CRG.0B.0.PEG CFF.B.0.PCG CRG.B.0.PEG CFF.B.0.PCG CRG.B.0.PEG ote: the last letter of the part number indicates the colour of the housing. Ex. G (standard) is grey. To obtain another colour, replace this letter by the letter corresponding to the selected colour (see table on page ). ) see calculation method, caution and suggested standard on page 8. ) lowest measured value; contact to contact or contact to shell. Audio-ono Audio-Stereo Test voltage (kv rms) ) ) Rated current (A) 0B.0 0B.0 0B B B 0.0 B. B. B 0.80 B 0.80 CFF Bridge plug with two non-latching plugs A maxi CRG Bridge plug with two non-latching plugs, and monitoring socket, key (G) or keys (A ) H B A B H CFF-CRG CFF-CRG 0B B maxi ote: in order to provide the user with a coding system, the bridge plug housing, the double panel washers and the bend reliefs are available in nine colours. FTG Straight plug, key (G) and two parallel sockets.8.8 FTG.0B.0.PFG FTG.0B.0.PFG FTG.0B.0.PFG umber of contacts Test voltage (kv rms) ) Rated current (A) Type 0 Type 0 Type 0 ote: ) see calculation method, caution and suggested standard on page 8. 9

32 I Threaded-latching models FVG Straight plug, key (G) or keys (B), cable collet ~ ~ A S S FVG ote: to be ordered with nut for fitting a bend relief to obtain the rating IP. S S maxi ESG Fixed socket with two round nuts, key (G) or keys (B), long threaded shell (back panel mounting). mini ) A B C e E ø C e ESG x0.... E maxi P Panel cut-out (page ) ote: ) minimum length of free thread to ensure mating. FVB Straight plug, keys (B), short shell for special cable crimping and for fitting a bend relief A FVB ote: part number for microphone applications: FVB.00.0.AE. After assembly the special bend relief GF D (to be ordered separately) is to be fitted...0 XRB Elbow (90 ) socket for printed circuit, keys (B), short shell with one nut, screw fixing (back panel mounting) P. mini ) XRB 00 e ote: ) minimum length of free thread to ensure mating = = A e I P 0 x0.. P Panel cut-out (page ) x. P8 PCB drilling pattern for contact only (page 8)

33 δ Alignment Key (B series) Alignment Key and Polarized Keying System B series connector model part numbers are composed of three letters. The AST ETTER indicates the key position and the contact type (male or female). Front view of a socket b of keys Angles 00 0B B b of keys Angles XB B B B B Contact type Plug Socket ote β (B) α γ β G A B α C D E β F J K γ δ 0 Y G A B α C D γ E β F J.... α K.... γ Y β.. γ male male male male male male male female female female female male female female female female female female female male male male male female ) Front view of a socket α β b of keys Angles 00 0B B b of keys Angles XB B B B B Contact type Plug Socket ote γ δ R α β γ δ R α 9 β γ 0 δ 0 male female ote: FTG, FGY, EY models are not available with all the keys. Please consult pages corresponding to these models. For R models see explanation on page and for S models see explanation on page 8. ) only FGY and EY models are available. First choice alternative Special order alternative

34 K K series connectors have been specifically designed for outdoor applications. They include an inner sleeve and two seals to prevent penetration of solids or liquids into the housing formed by the plug, free socket, fixed socket or coupler. All models of this series are watertight when mated to give a protection index of IP8 as per IEC 09 standard (in mated condition) when correctly assembled to an appropriate cable (IP otherwise). K series connectors have the same insulators as the B series and have the following main features: security of the Push-Pull latching system watertight connection (IP 8/IP ) multipole types to contacts solder, crimp or print (straight or elbow) contacts keying system («G» key standard) multiple key options to avoid cross mating for connector alignment of similar connectors 0 screening for full EC shielding high packing density for space savings rugged housing for extreme working conditions. etal housing models (page ) Fixed plugs Straight plugs Fixed sockets Free sockets Free coupler FXG FGG EGG EBG PHG TG T-plug with sockets (90 ) FAG FGG EG EDG PHG Elbow plug FPG FGG EEG EHG PHG FTG Fixed sockets FHG FG EEG EVG PKG EEG PBG Watertight or vacuumtight models (page ) Fixed sockets Fixed coupler PEG HGG HEG S

35 Part umbering System Plug FG G. K. 0. C A C Free socket PH G. K. 0. C C Z Variant: (page ) Cable ø: (page ) Collet type: (page ) Fixed socket EG G. K. 0. C Y Coupler S G. K. 0. T A PV : (page ) Alignment key: (page ) : (page ) Insert configuration: (page ) Variant: (page ) Contact: (page 0) Insulator: (page 0) Housing: (page 0) Part umber Example Straight plug with cable collet: FGG.K.0.CAC = straight plug with key (G) and cable collet, K series, multipole type with 0 contacts, outer shell in chrome-plated brass, PEEK insulator, male solder contacts, C type collet for. mm diameter cable. Free socket: PHG.K.0.CCZ = free socket with key (G) and cable collet, K series, multipole type with 0 contacts, outer shell in chrome-plated brass, PEEK insulator, female solder contacts, C type collet for. mm diameter cable and nut for fitting a bend relief. Fixed socket: EGG.K.0.CY = fixed socket, nut fixing, with key (G), K series, multipole type with 0 contacts, outer shell in chromeplated brass, PEEK extended insulator, female crimp contacts. Fixed coupler: SG.K.0.TAPV = fixed coupler, nut fixing, keys () on the flange end and key (G) at the other end, K series, multipole type with 0 contacts, outer shell in stainless steel, PEEK insulator, male-female contacts, vacuumtight. Part Section Showing Internal Components Straight plug Fixed socket outer shell earthing crown retaining ring hexagonal nut insulator female contact o-ring outer shell latch sleeve inner shell retaining ring collet nut split insert carrier insulator male contact earthing cone collet gasket washer

36 etal housing models Technical Characteristics echanical and Climatical Electrical Characteristics Value Standard Characteristics Value Standard Endurance Humidity Temperature range ) Resistance to vibrations Shock resistance Salt spray corrosion test Protection index (mated) ) Climatical category > 000 cycles IEC 0- test 9a up to 9% at 0 C - C, +00 C Hz, g IEC 0- test d 00 g, ms IEC 0- test c > 000h IEC 0- test f IP 8/IP IEC 09 0// IEC 008- Shielding efficiency at 0 Hz at GHz > 9 db IEC 09-- > 80 db IEC 09-- ote: the various tests have been carried out with FGG and EGG connector pairs, with chrome-plated brass shell, PEEK insulator and silicone O-ring. Detailed electrical characteristics, as well as materials and treatment are presented in the chapter Technical Characteristics on page. ) minimum operating temperature is -0 C for sockets fitted with an FP (Viton ) O-ring. ) IP8 achieved providing that the cable is perfectly circular and that assembly process ensures a high integrity seal. FGG Straight plug, key (G) or keys (A to F, and R), cable collet A S ~ ~ FGG FGG FGG FGG FGG FGG 0K K K K K K S Cable assembly (page ) FGG Straight plug, key (G) or keys (A to F, and R), cable collet and oversize cable collet ) A B S S ~ ~ FGG FGG FGG FGG K K K K Cable assembly (page ) S S ote: ) correspond to K type of collet, the fitting of oversize collets onto this model allows them to be fitted to the cables that can be accommodated by the next housing size up (see page ). FGG Straight plug, key (G) or keys (A to F, and R), cable collet and nut for fitting a bend relief ) A S ~ ~ FGG FGG FGG FGG FGG 0K K K K K Cable assembly (page ) S ote: ) to order, add a «Z» at the end of the reference. The bend relief must be ordered separately (see page ).

37 FG Straight plug, key (G) or keys (A to F and ), cable collet and lanyard release ~ A B S ~ FG FG K K B Cable assembly (page ) ote: cable material: stainless steel with Polyamide sheath S FXG Fixed plug with round flange, key (G) or keys (A to F, and R) and screw fixing ~ A B G H P S H P FXG FXG FXG K K K ø G P Panel cut-out (page ) S ote: this model does not include an O-ring behind the flange, it allows the device on which it is fitted to reach only IP0 protection index. It does not have a cable collet. FAG Fixed plug, nut fixing, non-latching, key (G) or keys (A to F, and R) maxi S A B e E ) S S e FAG FAG FAG FAG FAG K K K K K 0. x x x x x E maxi S P Panel cut-out (page ) ote: ) maximum length with crimp contacts. The K series is delivered with a locking washer. The K series is delivered with a round nut. FPG Elbow (90 ) plug, key (G) or keys (A to F, and R), cable collet ~ S ~ A D H S S S ~H S S FPG FPG FPG 0K K K D Cable assembly (page )

38 FHG Elbow (90 ) plug, key (G) or keys (A to F, and R), cable collet ~ S ~ ~H S S FHG FHG K K A D H S S S D Cable assembly (page ) EGG Fixed socket, nut fixing, key (G) or keys (A to F, and R) maxi e S EGG EGG EGG EGG EGG EGG 0K K K K K K A B e E ) S S 8 9. x x x x x x E maxi S P Panel cut-out (page ) ote: ) maximum length with crimp contacts. The K series is delivered with a round nut. EG Fixed socket, nut fixing, key (G) or keys (A to F, and R) and earthing tag maxi S A B e E ) S S e EG K x P Panel cut-out (page ) E maxi S ote: ) maximum length with crimp contacts. EEG Fixed socket, nut fixing, key (G) or keys (A to F, and R) (back panel mounting) maxi S P A B e E ) P S e EEG EEG EEG EEG EEG 0K K K K K x x x x x E maxi P Panel cut-out (page ) ote: ) maximum length with crimp contacts. The K and K series are delivered with a conical nut.

39 EEG Fixed socket, nut fixing, key (G) or keys (A to F and R) with straight print contacts for printed circuit (back panel mounting) S P e EEG EEG EEG EEG EEG 0K K K K K A B e E P S x x x x x E maxi P Panel cut-out (page ) P PCB drilling pattern (page ) ote: this contact type is available for E socket models fitted with female contact. ength depends on the number of contacts, see table page. The K and K series are delivered with a conical nut. EEG Fixed socket, nut fixing, key (G) or keys (A to F and R) with elbow (90 ) contacts for printed circuit (back panel mounting) P S 0 mini E maxi e EEG EEG EEG EEG 0K K K K A B e E P S 8 8 x x x x P Panel cut-out (page ) P PCB drilling pattern (page ) ote: length depends on the number of contacts, see PCB drilling pattern page. The K series is delivered with a conical nut. EBG Fixed socket with square flange, key (G) or keys (A to F, and R) and screw fixing A H A B F G H ) EBG EBG EBG K K K ø G F P Panel cut-out (page ) ote: ) maximum length with crimp contacts. EDG Fixed socket with square flange, key (G) or keys (A to F, and R), protruding shell and earthing tag, screw fixing A H ø C A B C F G H ) ø G F EDG K P Panel cut-out (page ) ote: ) maximum length with crimp contacts.

40 EHG Fixed socket, nut fixing, key (G) or keys (A to F and ), protruding shell maxi S A B e E ) S S S e S E maxi S EHG EHG EHG 0K K K 8 9. x x x P Panel cut-out (page ) ote: ) maximum length with crimp contacts. maxi EVG Fixed socket, nut fixing, key (G) or keys (A to F and ) and dust cap (spring loaded) S P A B e E ) P S S e EVG 0K 8 9. x E maxi S P Panel cut-out (page ) ote: ) maximum length with crimp contacts. PHG Free socket, key (G) or keys (A to F, and R), cable collet A S S ~ PHG PHG PHG PHG PHG PHG 0K K K K K K Cable assembly (page ) PHG Free socket, key (G) or keys (A to F, and R), cable collet and oversize cable collet ) A B S S ~ PHG PHG PHG PHG K K K K S S Cable assembly (page ) ote: ) correspond to K type of collet, the fitting of oversize collets onto this model allows them to be fitted to the cables that can be accommodated by the next housing size up (see page ). 8

41 PHG Free socket, key (G) or keys (A to F, and R), cable collet and nut for fitting a bend relief ) A S ~ PHG PHG PHG PHG PHG 0K K K K K ote: ) to order, add a «Z» at the end of the reference. S Cable assembly (page ) ote: The bend relief must be ordered separately (see page ). PKG Fixed socket, nut fixing, key (G) or keys (A to F, and R), cable collet A B e E S S S ~ S e PKG PKG PKG PKG PKG PKG 0K K K K K K 8 9. x x x x x x P Panel cut-out (page ) Cable assembly (page ) S E maxi S ote: the K series is delivered with a round nut. PBG Fixed socket, key (G) with square flange, cable collet and screw fixing A ~ H A B C F G H S PBG K ø C P Panel cut-out (page ) Cable assembly (page ) ø G S F PEG Fixed socket, nut fixing, key (G) or keys (A to F, and R), cable collet (back panel mounting) ~ P A B e E P S S S e PEG PEG PEG PEG 0K K K K 8 8 x x x x P Panel cut-out (page ) Cable assembly (page ) S E maxi ote: the K series is delivered with a conical nut. 9

42 TG Free coupler, key (G) on one side and keys () on the other TG.K..CP Dim. (mm) A. ote: this model is only available in type 08, 0,, 8, 0, and 0. FTG T-plug, key (G) with sockets (90 ), key (G) A B H H FTG.K.0.CF FTG.K.08.CF 0

43 Watertight or vacuumtight models These socket and coupler models allow the device on which they are fitted to reach a protection index of IP8 as per IEC 09. They are fully compatible with plugs of the same series and are widely used for portable radios, military, laboratory equipment, aviation, etc. These models are identified by a letter «P» at the end of the reference. ost of these models are also available in a vacuumtight version. Such models are identified by an additional letter «V» at the end of the part number (certificate on request). Epoxy resin is used to seal these models. Technical Characteristics echanical and Climatical Characteristics Value Standard Endurance Humidity Temperature range (0K-K) Temperature range (K to K) Salt spray corrosion test Climatical category eakage rate (He) ) ote: ) only for vacuumtight models. > 000 cycles IEC 0- test 9a up to 9% at 0 C - 0 C/+00 C - 0 C/+80 C > 000h IEC 0- test f 0/80/ IEC 008- < 0 - mbar.l.s - IEC 0- test b Characteristics Value Standard aximum operating pressure ) 0K K K K K K 0 bar 0 bar 0 bar 0 bar bar bar IEC 0- test d ote: ) this value corresponds to the maximum allowed pressure difference for the assembled socket. HGG Fixed socket, nut fixing, key (G) or keys (A to F and ), watertight or vacuumtight maxi S A B e E S S e E maxi S HGG HGG HGG HGG HGG HGG 0K K K K K K 8 9. x x x x x x P Panel cut-out (page ) ote: the K series is delivered with a round nut. HEG Fixed socket, nut fixing, key (G) or keys (A to F and ), watertight or vacuumtight (back panel mounting) maxi P S A B e E P S e HEG HEG HEG 0K K K 8 8 x x x E maxi P Panel cut-out (page )

44 S Fixed coupler, nut fixing, key (G) or keys () at the flange end, and key (G) or keys (C or ) at the other end, watertight or vacuumtight S S e E maxi G SG Contacts SG G SC C Example SG Plug with key G Plug with key Alignment key see page. SG SG SG SG SC SG SC K K K K P Panel cut-out (page ) Type A B e E S S female male male female.0 0x male female.0 x male female 0. 0x male female.0 x ote: for this fixed coupler, the first contact type mentioned is always the one at the flange end. On request, these couplers can be produced in other series, with other keys. The K series is delivered with a round nut.

45 δ Alignment Key (K series) Alignment Key and Polarized Keying System K series connector model part numbers are composed of three letters. The AST ETTER indicates the key position and the contact type (male or female). Front view of a socket α b of keys Angles 0K K K K K K Plug Contact type Socket ote γ β G A B α C D γ E β F γ male male male male male male male female female female female female female female female male Front view of a socket α b of keys Angles 0K K K K K K Plug Contact type Socket ote β γ δ R α 9 β γ δ male female ote: S and TG models are not available with all the keys. For S models see explanation on page. Please consult the pages corresponding to these models. First choice alternative Special order alternative

46

47 Insert configuration (B and K series) ultipole ale solder contacts Female solder contacts Contact type Solder contact Crimp contact ale crimp contacts Female crimp contacts umber of contacts (mm) Solder Crimp Print (straight) Print (elbow) Test voltage (kv rms) ) Contact-contact ) ) Test voltage (kv rms) Contact-shell Test voltage (kv rms) ) Contact-contact ) ) Test voltage (kv rms) Contact-shell Rated current (A) ) 00 0B 0K B K ) ) ) ) 0. ) ) ) ) ) ) ) ) ) ) ) First choice alternative Special order alternative ote: ) see calculation method, caution and suggested standard on page 8. ) rated current = A for socket with elbow (90 ) contact for printed circuit. ) rated current = A for socket with elbow (90 ) contact for printed circuit. ) available only for connectors fitted with male contacts. ) test voltage (kv) contact-shell is slightly lower for K series (values here are for B series).

48 ultipole ale solder contacts Female solder contacts Contact type Solder contact Crimp contact ale crimp contacts Female crimp contacts umber of contacts (mm) Solder Crimp Print (straight) Print (elbow) Test voltage (kv rms) ) Contact-contact ) ) Test voltage (kv rms) Contact-shell Test voltage (kv rms) ) Contact-contact ) ) Test voltage (kv rms) Contact-shell Rated current (A) ) XB B K ) ) ) ) ) ) ) ) First choice alternative Special order alternative ote: ) see calculation method, caution and suggested standard on page 8. ) rated current = A for socket with elbow (90 ) contact for printed circuit. ) rated current = A for socket with elbow (90 ) contact for printed circuit. ) test voltage (kv) contact-shell is slightly lower for K series (values here are for B series).

49 ultipole ale solder contacts Female solder contacts Contact type Solder contact Crimp contact ale crimp contacts Female crimp contacts umber of contacts (mm) Solder Crimp Print (straight) Print (elbow) Test voltage (kv rms) ) Contact-contact ) ) Test voltage (kv rms) Contact-shell Test voltage (kv rms) ) Contact-contact ) ) Test voltage (kv rms) Contact-shell Rated current (A) ) B K ) First choice alternative Special order alternative ote: ) see calculation method, caution and suggested standard on page 8. ) rated current = A for socket with elbow (90 ) contact for printed circuit. ) test voltage (kv) contact-shell is slightly lower for K series (values here are for B series).

50 ultipole ale solder contacts Female solder contacts Contact type Solder contact Crimp contact B ale crimp contacts Female crimp contacts K umber of contacts (mm) Solder Crimp Print (straight) Test voltage (kv rms) ) Contact-contact ) ) Test voltage (kv rms) Contact-shell Test voltage (kv rms) ) Contact-contact ) ) Test voltage (kv rms) Contact-shell Rated current (A) ) First choice alternative Special order alternative ote: ) see calculation method, caution and suggested standard on page 8. ) test voltage (kv) contact-shell is slightly lower for K series (values here are for B series). 8

51 ultipole ale solder contacts Female solder contacts Contact type Solder contact Crimp contact B ale crimp contacts Female crimp contacts K umber of contacts (mm) Solder Crimp Print (straight) Test voltage (kv rms) ) Contact-contact ) ) Test voltage (kv rms) Contact-shell Test voltage (kv rms) ) Contact-contact ) ) Test voltage (kv rms) Contact-shell Rated current (A) ) First choice alternative Special order alternative ote: ) see calculation method, caution and suggested standard on page 8. ) test voltage (kv) contact-shell is slightly lower for K series (values here are for B series). 9

52 Housings (B and K series) Ref. C K S T U X G P R H P Outer shell and collet nut atch sleeve + earthing crown Other metallic components aterial Surf. treatment aterial Surf. treatment aterial Surf. treatment Remarks Brass chrome brass/bronze nickel ) brass nickel Brass nickel brass/bronze nickel ) brass nickel Brass black chrome brass/bronze nickel ) brass nickel Stainless steel brass/bronze nickel ) brass nickel Stainless steel stainless steel brass nickel Stainless steel stainless steel stainless steel Aluminium alloy anodized brass/bronze nickel ) brass nickel ) Aluminium alloy nickel anthracite brass/bronze nickel ) brass nickel PEEK (natural) brass/bronze nickel ) brass nickel Only for FGG and EG (B series) PSU brass/bronze nickel ) brass nickel Only for FGY and EY (B series) ) PPSU brass/bronze nickel ) brass nickel Only for FGY and EY (B series) ) PPS/brass /nickel brass/bronze nickel ) brass nickel Only for elbow sockets (B series) PA. brass/bronze nickel ) brass nickel Only for CRF and CRG bridge plug ) ote ote: detailed characteristics of these materials and treatments are presented on page. ) see «variant» for the colour. ) in the K series, the latch sleeve is chrome-plated. First choice alternative Special order alternative Insulators (B and K series) Ref. Y aterial Contact type Remarks ote PEEK Crimp extended design, with contacts that recess into insulator PEEK Solder or print ote: detailed characteristics of these materials are presented on page. Contacts (B and K series) Soldering characteristics no need to order specific tools, a simple soldering iron is sufficient ideal for very small and fragile conductors contacts with solder cups to allow the solder to flow Crimping characteristics practical, quick contact fixing outside the insulator possible use at high temperature need to order specific tools no risk of heating the insulator during the conductorcontact fixing high tensile strength totally lead-free solution ote: see page for more information. 0

53 Contacts reference for plugs, free or fixed sockets Contact type ale Female Contact ø C Form (mm) (mm) per fig. AWG max. Solid Section max. (mm ) Conductor Stranded AWG Section (mm ) min. max. min. max. F r ) () otes fig. fig. Solder Crimp ø C ø C ø C ø C ø C ø C A C C B C B G C B G C B C B C C P P U P U P P ) 0.0 ) ) ) ) ) 0. ) 0. ) )) 0. ) ) ) ) ) ) ) ) Print ø C ø C D dimensions and C are detailed in the section on PCB drilling pattern. See page. Print (elbow) V V dimensions and C are detailed in the section on PCB drilling pattern. See page. ø C ote: ) contact retention force in the insulator (according to IEC 0-8 test a). ) for 00 multipole series. ) for a given AWG, the diameter of some stranded conductor designs is larger than the solder cup diameter. ake sure that the maximum conductor diameter is smaller than ø C. ) available only for 00 multipole series and connectors fitted with male contacts of the 0B and B series. ) for 0B.0/0B.0 and 0K.0/0K.0 ø C =.0 mm, AWG max 0, section max (mm ) 0.0. ) for 00 and B/K series, according to manufacturing and plating tolerance ø C min = 0. mm. First choice alternative Special order alternative Contacts reference for couplers R, S and TG Ref. Contact type Remarks A ale - Female contact configuration is explained on page, 8, Female - ale contact configuration is explained on page, 8, Female - Female contact configuration is explained on page

54 Collets (B and K series) D and type collets for B series D type type Type Code Collet ø Cable ø max. min. otes Type Code Collet ø Cable ø max. min. otes 00 0B B XB B D D D D D D D D D D D D D D D D D 8 D D D D D 8 D 9 D >...8. > >... >.... >.... >... >... > >... >.... >...9. > >... >... >... >... > > > > 9. ) ) ) ) ) B B B D D D 9 D 0 D D 9 D 0 D D D D D D D D D 9 D D D.. > > > > > > > ) ) ) ) ) ) ) ote: all dimensions are in millimetres. ) these collets cannot be used for connector models with nut for fitting a bend relief. ) the inner diameter of the smallest bend relief available is. mm.

55 C and K type collets for K series C type K type oversize cable collet Type Code Collet ø Cable ø max. min. otes Type Code Collet ø Cable ø max. min. 0K K K K C 0 C C 0 C C 0 C C 0 C C 0 C C 0 C C 0 C C 0 C C 0 C C 0 C K 0 K K 80 K 8 C C 0 C C 0 C C 0 C C 0 C C 0 C C 0 C C 80 C 8 K 90 K 9 K 0 K C 0 C C 0 C C 0 C C 0 C ) ) ) K K K C 0 C C 80 C 8 C 90 C 9 C 0 C K K K K K C 0 C C 0 C C 0 C C 80 C 8 C 90 C 9 C 0 C C C C C K K K 8 K 9 K 0 K K K C 0 C C C C C C C C 8 C 9 C 0 C C C ote: ) the inner diameter of the smallest bend relief available is. mm. All dimensions are in millimetres.

56 Variant (B and K series) Bend relief for B series models with collet eed to be ordered Bend relief for K series models with collet eed to be ordered Ref. Type Collet Code eed to be ordered separately (see pages and ) Ref. Type Collet Code eed to be ordered separately (see pages and ) 00 Z D to GA.00.. GB K Z C 0 to 0 GA.0B.. 0B B XB B B B Z Z Z Z Z Z D to and D to D to and D to 9 D to 0 and 9 D 0 to GA.0B.. GA.B.. GA.B.. GA.B.. GA.0B.. GA.B.. GA.B.. GA.B.. GA.B.. GA.B.. GA.B.. K K K K Z Z Z Z C to K 0 to 8 C to 8 K 90 to 0 C 0 to 0 K to C 0 to ote: All dimensions are in millimetres. GA.B.. GA.B.. GA.B.. GA.B.. GA.B.. GA.B.. GA.B.. B Z D to GA.B.. Colour of the bridge plug shells and connectors shell made of plastic material and aluminium alloys Colour Bridge plug and plastic shell PSU PPSU PA. Anodized colour Aluminium alloys Anodized colour for bend relief collet nut A B G J R S T V X F blue white grey yellow brown black red orange natural green black natural cream ote: other anodizing colours are available for connectors with collet nut for bend relief. Please consult us. Watertight and vacumtight socket and coupler models (B and K series) B YH, HG, H, HH, HC, HE, H, S Watertight Vacuumtight P PV O-ring and gasket material (K series) Standard connectors are delivered with silicone o-ring and gaskets. The vacuumtight models, identified with the letter «PV», are delivered with Viton gaskets. Other gaskets material can be delivered upon special request. O-ring material K HG, HE, S P PV FP (Viton ) EPD FP (Viton ) and collet nut for bend relief H E D

57 S SERIES E SERIES (watertight) SERIES (watertight keyed)

58 S S series connectors have main features as follows: security of the Push-Pull self-latching system solder or print contacts (straight or elbow) unipole types transmitting current up to 0 A polarisation by stepped insert (half-moon) and multipole types with up to 0 contacts fitted with male and female contacts 0 screening for full EC shielding. etal housing models (page 8) Fixed plug Straight plugs Fixed sockets Free sockets FAA FFA, FFP ERA EEP PCA, PCP Elbow plugs FFA ER ERD PCA F FFA, FFP ERC ECP PCA, PCP FA FFB ERS ECP PZP Fixed sockets FS FFE EHP ECP PSA, PSP FF EBD Free coupler PSS FFF EBS RA Fixed coupler T-plug FFS EBC RAD FTA FZP Elbow socket models (page 8) Elbow sockets EP EXP Plastic housing models (page 0) Straight plugs Fixed socket Watertight or vacuumtight models (page ) Fixed sockets Fixed coupler FFA, FFP HGP EWB FFP ER SWH FF HCP HGW

59 Part umbering System Plug FFA. S. 0. C A C Free socket PCA. S. 0. C C Z Variant: (page 0) Cable ø: (page 0) Collet type: (page 0) Fixed socket ERA. S. 0. C Coupler RAD. S. 0. C Variant: (page 0) : (page 8) : (page 8) Insert configuration: (page 9) Contact: (page 99) Insulator: (page 99) Housing: (page 99) Part umber Example Straight plug with cable collet: FFA.S.0.CAC = straight plug with cable collet, S series, multipole type with contacts, outer shell in chromeplated brass, PEEK insulator, male and female solder contacts, C type collet for a. mm diameter cable. Free socket: PCA.S.0.CCZ = free socket, with cable collet, S series, multipole type with contacts, outer shell in chromeplated brass, PEEK insulator, female and male solder contacts, C type collet for a. mm diameter cable and nut for fitting a bend relief. Fixed socket: ERA.S.0.C = fixed socket, nut fixing, S series, multipole type with contacts, outer shell in chrome-plated brass, PEEK insulator, female and male solder contacts. Fixed coupler: RAD.S.0.C = straight coupler, nut fixing, S series, multipole type with contacts, outer shell in chrome-plated brass, PEEK insulator, female and male contacts each end. Part Section Showing Internal Components Fixed socket Straight plug 8 outer shell earthing crown retaining ring hexagonal nut locking washer insulator male contact female contact outer shell latch sleeve collet nut centre-piece insulator male contact female contact collet

60 etal housing models Technical Characteristics echanical and Climatical Electrical Characteristics Value Standard Characteristics Value Standard Endurance Humidity Temperature range Resistance to vibrations Shock resistance Salt spray corrosion test Protection index (mated) Climatical category > 000 cycles IEC 0- test 9a up to 9% at 0 C - C, +0 C Hz, g IEC 0- test d 00 g, ms IEC 0- test c > 000h IEC 0- test f IP 0 IEC 09 // IEC 008- Shielding efficiency at 0 Hz at GHz > db IEC 09-- > 0 db IEC 09-- ote: The various tests have been carried out with FFA and ERA connector pairs, with chrome-plated brass shell and PEEK insulator. Detailed electrical characteristics, as well as materials and treatment are presented in the chapter Technical Characteristics on page. FFA Straight plug, cable collet A S S ~ ~ FFA 00 FFA 0S FFA S FFA S FFA S FFA S FFA S FFA S Cable assembly (pages to ) FFA Straight plug with oversize cable collet ) A B S S ~ ~ FFA 00 FFA 0S FFA S FFA S FFA S FFA S FFA S S S Cable assembly (pages and ) ote: ) correspond to K type of collet, the fitting of oversize collets onto this model allows them to be fitted to the cables that can be accommodated by the next housing size up (see page 0). FFA Straight plug, cable collet and nut for fitting a bend relief ) S ~ ~ FFA 00 FFA 0S FFA S FFA S FFA S FFA S A S Cable assembly (pages and ) ote: ) to order, add a «Z» at the end of the reference. The bend relief must be ordered separately (see page ). 8

61 FFP Straight plug, cable collet and inner anti-rotating device A S ~ ~ FFP FFP FFP FFP S S S S S Cable assembly (pages and ) FFB Straight plug, cable collet and safety locking ring A S ~ ~ FFB FFB FFB FFB 0S S S S S Cable assembly (pages and ) ote: nut for fitting a bend relief (available only for size S). FFE Straight plug, cable collet, front seal and nut for fitting a bend relief ) (protected to IP when mated) A S ~ ~ FFE 00 FFE 0S FFE S FFE S FFE S S Cable assembly (pages and ) ote: ) to order, add a «Z» at the end of the reference. The bend relief must be ordered separately (see page ). FF Straight plug, flats on latch sleeve, cable collet and inner anti-rotating device ~ ~ FF S A S S Cable assembly (page ) S S ote: this model is fitted with a «D or» type collet system. It is also adapted for crimp contacts. Available only for multipole. 9

62 FFF Straight plug, non-latching, cable collet A S ~ ~ FFF 00 FFF 0S FFF S FFF S S Cable assembly (pages and ) FFS Straight plug for cable crimping A S S FFS Cable assembly (page ) S S ote: available only with crimp backnut E similar to 00.0 series. FZP Straight plug for remote handling, cable collet and inner anti-rotating device A S S ~ ~ FZP FZP FZP FZP FZP FZP S S S S S S S S Cable assembly (pages to ) FAA Fixed plug non-latching, nut fixing A B e E ) S S e S E maxi maxi S FAA 00 FAA 0S FAA S FAA S FAA S FAA S FAA S FAA S 8 0. x x x x x x x x P Panel cut-out (page ) P Panel cut-out S series (page ) ote: ) unipole model 0

63 FC/F Elbow (90 ) plug, cable collet A H S S ~H S S FC 00 F 0S F S F S Cable assembly (pages to ) ote: FC.00 model is used for the unipole type. For 0S, S and S series use «D» type collet, see page. FA Elbow (90 ) plug, cable collet A A H S S fig. fig. A A FA FA FA FA S S S S ~H S Cable assembly (pages to ) S ote: fig. is used for the unipole type, fig. is used for the multipole type. aximum operating temperature: 0 C FS Elbow (90 ) plug for cable crimping A A H H FS Cable assembly (page ) ote: available only with crimp backnut E similar to 00.0 series. aximum operating temperature: 0 C ERA Fixed socket, nut fixing A B e E ) S S e S maxi E maxi S ERA 00 ERA 0S ERA S ERA S ERA S ERA S ERA S ERA S 8 0. x x x x x x x x P Panel cut-out (page ) ote: ) unipole model ote: the S series is delivered with a tapered washer and a round nut. The S series is delivered without a locking washer and with a round nut.

64 ER Fixed socket, nut fixing, with earthing tag maxi S A B e E ) S S e E maxi S ER ER ER ER 0S S S S 0. 9x x x x P Panel cut-out (page ) ote: ) unipole model ERC Fixed socket, nut fixing with slot in the flange maxi S A B e E F ) S S e F ERC 00 ERC 0S ERC S 8 0. x x x E maxi S P Panel cut-out (page ) ote: ) unipole model ERS Fixed socket, nut fixing, long threaded shell, without flats maxi S A B e E ) S e ERS 0S 0. 9x P Panel cut-out (page ) E maxi ote: ) unipole model EHP Fixed socket, nut fixing, protruding shell S maxi A B e E ) S S e EHP EHP EHP 0S S S 0. 9x x x E maxi S P Panel cut-out 0S series (page ) P Panel cut-out (page ) ote: ) unipole model

65 EBD Fixed socket with square flange and screw fixing A maxi H A B C H ) EBD S... ø C P Panel cut-out (page ) ote: ) unipole model EBS Fixed socket with round flange and screw fixing maxi H EBS S A B C H ) ø C P Panel cut-out (page ) ote: ) unipole model EBC Fixed socket with square flange, protruding shell and screw fixing A H maxi A B C H ) ø C EBC EBC EBC EBC S S S S P Panel cut-out (page ) ote: ) unipole model EEP Fixed socket, nut fixing (back panel mounting) maxi P S S A B e E ) P S S e EEP EEP S S.0 x x E maxi P Panel cut-out (page ) ote: ) unipole model

66 ERD Fixed socket with two nuts (back panel mounting) maxi S A B e E ) S S S E maxi e ERD ERD ERD ERD ERD 0S S S S S. 9x x x x x P Panel cut-out (page ) ote: ) unipole model. The S and S series are delivered with a conical nut. ECP Fixed socket with two nuts, long threaded shell (back panel mounting) maxi S A B e E ) S S S E maxi e ECP ECP ECP ECP 0S S S S. 9x x x x P Panel cut-out (page ) ote: ) unipole model. The S series is delivered with a conical nut. ECP Fixed socket with two nuts, long threaded shell, with straight contact for printed circuit (back panel mounting) S A B e E S S e ECP ECP ECP ECP 0S S S S. 9x x x x S E maxi P Panel cut-out (page ) P PCB drilling pattern (page 9) ote: this contact type is available for all E socket models. See page 9 for table of available types. ength depends on the number of contacts, see table on page 9. The S series is delivered with a conical nut. ECP Fixed socket with two nuts, long threaded shell, with elbow (90 ) contacts for printed circuit (back panel mounting) S S A B e E S S 0 mini E maxi e ECP ECP ECP ECP 0S S S S. 9x x x x P Panel cut-out (page ) P PCB drilling pattern (page 0) ote: this contact type is available for all back panel mounting socket types. See page 0 for available types. ength depends on the number of contacts, see PCB drilling pattern on page 0. The S series is delivered with a conical nut.

67 PCA Free socket, cable collet A S S ~ PCA 00 PCA 0S PCA S PCA S PCA S PCA S PCA S PCA S Cable assembly (pages to ) PCA Free socket with oversize cable collet ) A B S S ~ PCA 00 PCA 0S PCA S PCA S PCA S PCA S S S Cable assembly (pages and ) ote: ) correspond to K type of collet, the fitting of oversize collets onto this model allows them to be fitted to the cables that can be accommodated by the next housing size up (see page 0). PCA Free socket, cable collet and nut for fitting a bend relief ) A S S ~ PCA 00 PCA 0S PCA S PCA S PCA S PCA S Cable assembly (pages and ) ote: ) to order, add a «Z» at the end of the reference. The bend relief must be ordered separately (see page ). PCP Free socket, cable collet and inner anti-rotating device A S ~ PCP PCP PCP PCP S S S S S Cable assembly (pages and )

68 PZP Free socket for remote handling with cable collet and inner anti-rotating device ~ PZP PZP PZP S S S A S S S S Cable assembly (pages and ) PSA Fixed socket, nut fixing, cable collet A B e E S S S ~ S e PSA 00 PSA 0S PSA S PSA S PSA S PSA S PSA S PSA S 8 0. x x x x x x x x Cable assembly (pages to ) S E maxi S P Panel cut-out (page ) ote: the S series is delivered with a tapered washer and a round nut. The S series is delivered without a locking washer and with a round nut. PSP Fixed socket, nut fixing, cable collet and inner anti-rotating device ~ A B e E S S S S e PSP PSP PSP PSP S S S S.8 x x x x Cable assembly (pages and ) S E maxi S P Panel cut-out (page ) PSS Free socket, nut fixing for cable crimping A B e E S S S S PSS x e Cable assembly (page ) P Panel cut-out (page ) S E maxi S ote: available only with crimp backnut E similar to 00.0 series.

69 RA Free coupler ~ I Dim. (mm) A RA 00 RA 0S RA S RA S RA S RA S RA S ote: see page 0 for the available plug and contact configurations and in order to ensure correct contact alignment. RAD Fixed coupler, nut fixing S e E maxi S RAD 00 RAD 0S RAD S RAD S RAD S RAD S RAD S A B e E S S 8 0. x x x x x x x P Panel cut-out (page ) ote: see page 0 for the available plug and contact configurations and in order to ensure correct contact alignment. P Panel cut-out S and S series (page ) ote: the S series is delivered with a tapered washer and a round nut. FTA T-plug with two in line sockets A A H I H FTA 00 FTA 0S FTA S FTA S ote: multipole version available only with contacts (type 0).

70 I Elbow socket models Technical Characteristics Types aterials and Treatment 0S, S Type 0 Housing Component etallic parts Earthing crown Insulator Female contact ote: ) not used for all sizes. The surface treatment standards are as follows: ickel SAE AS QQ 90 Gold: ISO 8 Surface aterial Treat. (µm) Cu i Au PPS ) Brass 0. Brass 0. Bronze 0. PEEK Bronze 0.. 0S, S 0 Electrical 0S, S S S EP EXP EP EXP EP EXP 0S 0S S S S S Types Test voltage (kv rms) ) Rated current (A) ote: ) see calculation method, caution and suggested standard on page 8. EP Elbow (90 ) socket for printed circuit (solder or screw fixing). Part umber A D H I K H K EP.0S.0.H EP.0S.0.H EP.0S.0.H EP.S.0.H EP.S.0.H EP.S.0.H EP.S.0.H EP.S.0.H ø 0.. D ote: to replace the ground pins by screws (.) add an «S» to the end of the part number. (e.g.: EP.S.0.HS) P PCB drilling pattern (page 0) 8

71 I EP Elbow (90 ) socket for printed circuit K.08 I H I EP Elbow (90 ) socket for printed circuit.08 Dim. (mm) Part umber A H I EP P PCB drilling pattern (page 0) ø 0.. Part umber A D H I K EP.0S..DT ote: available only in unipole version. P PCB drilling pattern (page 0) Ø D. EXP Elbow (90 ) socket for printed circuit with two nuts (solder or screw fixing) Part umber A B D e E H I K S K S e EXP.0S.0.H EXP.0S.0.H EXP.0S.0.H EXP.S.0.H EXP.S.0.H EXP.S.0.H EXP.S.0.H EXP.S.0.H.. 9x x H ø 0.. E maxi D ote: to replace the ground pins by screws (.) add an «S» to the end of the part number. (e.g.: EXP.S.0.HS). P Panel cut-out 0S series (page ). P0 Panel cut-out S series (page ) P PCB drilling pattern (page 0) 9

72 Plastic housing models These connectors are particularly recommended for all applications requiring maximum electrical insulation when mated. The design, including a latch sleeve and a metal earthing crown, guarantees EC screening efficiency to meet most requirements. Technical Characteristics echanical and Climatical Characteristics Colour Endurance Humidity Temperature range Sterilization resistance ) Resistance to organic solvents Value PEEK PO PSU PPSU Standard natural (beige) black white or grey cream > 000 cycles > 000 cycles > 000 cycles > 000 cycles IEC 0- test 9a up to 9% at 0 C - 0 C/+0 C - 0 C/+ C - 0 C/+0 C - 0 C/+80 C > 00 cycles none ~0 cycles > 00 cycles IEC 00-. very good very good limited good ote: ) Steam sterilization FFA FFP Straight plug, cable collet, PEEK or PO outer shell Straight plug, cable collet, PEEK or PO outer shell and inner anti-rotating device ~ ~ A S S FFA 00 FFP S FFP S FFP S Cable assembly (pages and ) FFP Straight plug, cable collet, PEEK or PO outer shell, inner anti-rotating device and nut for fitting a bend relief ) ~ A S ~ FFP FFP FFP S S S S Cable assembly (pages and ) ote: ) to order, add a «Z» at the end of the reference. The bend relief must be ordered separately (see page ). FF Straight plug, cable collet, with PSU and PPSU outer shell, inner anti-rotating device and nut for fitting a bend relief ) A S ~ ~ FF S.. 9. Cable assembly (page ) S ote: ) to order, add a «Z» at the end of the reference. The bend relief must be ordered separately (see page ). This model is fitted with a «D or» type collet system. It is also adapted for crimp contacts. Available only for multipole. 0

73 ER Fixed socket, nut fixing, with earthing tag, PEEK or PO outer shell maxi S A B e E ) S S e E maxi S ER 00 ER 0S ER S ER S ER S 9 0. x x x x x P Panel cut-out (page ) ote: ) unipole model

74 Watertight or vacuumtight models These socket or coupler models allow the device on which they are fitted to reach a protection index of IP8 as per IEC 09. They are fully compatible with plugs of the same series and are widely used for portable radios, military, laboratory equipment, aviation, etc. These models are identified by a letter «P» at the end of the reference. ost of these models are also available in a vacuumtight version. Such models are identified by an additional letter «V» at the end of the part number (certificate on request). Epoxy resin is used to seal these models. Technical Characteristics echanical and Climatical Characteristics Value Standard Characteristics Value Standard Endurance Humidity Temperature range (0S-S) Temperature range (S-S) Salt spray corrosion test Climatical category eakage rate (He) ) > 000 cycles IEC 0- test 9a up to 9% at 0 C - 0 C/+00 C - 0 C/+80 C > 000h IEC 0- test f 0/80/ IEC 008- < 0 - mbar.l.s - IEC 0- test b aximum operating pressure ) 0S S S S S S S 0 bar 0 bar 0 bar 0 bar IEC 0- test d bar bar bar ote: ) only for vacuumtight models. ote: ) this value corresponds to the maximum allowed pressure difference for the assembled socket. HGP Fixed socket, nut fixing, watertight or vacuumtight e S S E maxi maxi HGP 0S HGP S HGP S HGP S HGP S HGP S HGP S A B e E ) S S 8.8 x x x x x x x P Panel cut-out (page ) ote: ) unipole model ote: the S and S series are delivered with a round nut. HGW Fixed socket, nut fixing, with back washer, watertight or vacuumtight S maxi e A B e E E S mini maxi E mini/maxi HGW HGW 0S S 0 9x x P Panel cut-out (page ) ote: vacuumtight version is only available in the 0S series.

75 EWB Fixed socket, nut fixing, with two flats on the flange, watertight or vacuumtight maxi S S A B e E ) S S S e E maxi S EWB EWB EWB EWB 0S S S S 8.8 x x x x P Panel cut-out (page ) ote: ) unipole model HCP Fixed socket, nut fixing, watertight or vacuumtight (back panel mounting) maxi S A B e E P S E maxi e HCP HCP HCP S S S 8 0 x x x P P Panel cut-out (page ) ote: the S and S series are delivered with a conical nut. SWH Fixed coupler, nut fixing, watertight or vacuumtight A B e E S S e SWH SWH SWH SWH SWH SWH SWH 0S S S S S S S.8 0x x x x x x x S E maxi S P Panel cut-out (page ) ote: see page 0 for the available plug and contact configurations and in order to ensure correct contact alignment. The S and S series are delivered with a round nut.

76 E E series connectors have been specifically designed for outdoor applications. They include an inner sleeve and two seals to prevent penetration of solids or liquids into the housing formed by the plug, free socket, fixed socket or coupler. All models of these series are watertight when mated and give a protection index of IP 8 as per IEC 09 standard (in mated condition) when correctly assembled to an appropriate cable (IP otherwise). security of the Push-Pull latching system watertight connection (IP 8/IP ) unipole types transmitting current up to 0 A polarization by stepped insert (half-moon) and multipole types with up to 0 contacts fitted with male and female contacts wide range of models satisfying most applications solder or print contacts (straight or elbow) 0 screening for full EC shielding rugged housing for extreme working condition. etal housing models (page ) Straight plug Straight plugs Fixed sockets Free sockets FZP FFA, FFP ERA EEP PCA, PCP Fixed plug FAA FFA ERC EEP PCA Elbow plug FFA ERB EEP PCA F Fixed socket FFF FA EHP PSA Free coupler Watertight or vacuumtight models (page 8) Fixed sockets Fixed coupler RA HGP EBR SWH

77 Part umbering System Plug FFA. E. 0. C A C Free socket PCA. E. 0. C C Z Variant: (page 0) Cable ø: (page 0) Collet type: (page 0) Fixed socket ERA. E. 0. C Coupler RA. E. 0. C Variant: (page 0) : (page ) : (page ) Insert configuration: (page 9) Contact: (page 99) Insulator: (page 99) Housing: (page 99) Part umber Example Straight plug with cable collet: FFA.E.0.CAC = straight plug with cable collet, E series, multipole type with contacts, outer shell in chromeplated brass, PEEK insulator, male and female solder contacts, C type collet for a. mm diameter cable. Free socket: PCA.E.0.CCZ = free socket with cable collet, E series, multipole type with contacts, outer shell in chromeplated brass, PEEK insulator, female and male solder contacts, C type collet for a. mm diameter cable and collet nut for fitting a bend relief. Fixed socket: ERA.E.0.C = fixed socket, nut fixing, E series, multipole type with contacts, outer shell in chrome-plated brass, PEEK insulator, female and male solder contacts. Free coupler: RA.E.0.C = straight coupler, E series, multipole type with contacts, outer shell in chrome-plated brass, PEEK insulator, female and male contacts each end. Part Section Showing Internal Components Straight plug 8 Fixed socket outer shell earthing crown retaining ring hexagonal nut insulator male contact female contact o-ring outer shell latch sleeve inner shell retaining ring collet nut centre-piece insulator 8 male contact 9 female contact 0 earthing cone collet gasket washer

78 etal housing models Technical Characteristics echanical and Climatical Electrical Characteristics Value Standard Characteristics Value Standard Endurance Humidity Temperature range ) Resistance to vibrations Shock resistance Salt spray corrosion test Protection index (mated) ) Climatical category > 000 cycles IEC 0- test 9a up to 9% at 0 C - C, +00 C Hz, g IEC 0- test d 00 g, ms IEC 0- test c > 000h IEC 0- test f IP 8/IP IEC 09 0// IEC 008- Shielding efficiency at 0 Hz at GHz > 9 db IEC 09-- > 80 db IEC 09-- ote: the various tests have been carried out with FFA and ERA connector pairs, with chrome-plated brass shell, PEEK insulator and silicone O-ring. Detailed electrical characteristics, as well as materials and treatment are presented in the chapter Technical Characteristics on page. ) minimum operating temperature is -0 C for sockets fitted with an FP (Viton ) O-ring. ) IP8 achieved providing that the cable is perfectly circular and that assembly process ensures a high integrity seal. FFA Straight plug, cable collet A S S ~ ~ FFA 0E FFA E FFA E FFA E FFA E FFA E FGG ) E ote: ) with key (G) Cable assembly (pages and 8) FFA Straight plug with oversize cable collet ) A B S S ~ ~ FFA FFA FFA FFA E E E E Cable assembly (pages and 9) S S ote: ) correspond to K type of collet, the fitting of oversize collets onto this model allows them to be fitted to the cables that can be accommodated by the next housing size up (see page 0). FFA Straight plug, cable collet and nut for fitting a bend relief ) A S ~ ~ FFA FFA FFA FFA FFA 0E E E E E Cable assembly (pages and 8) S ote: ) to order, add a «Z» at the end of the reference. The bend relief must be ordered separately (see page ).

79 FFF Straight plug non-latching, cable collet ~ A S ~ FFF FFF 0E E Cable assembly (page ) S FFP Straight plug, cable collet and inner anti-rotating device ~ A S ~ FFP FFP E E Cable assembly (pages and 8) S FZP Straight plug for remote handling, cable collet and inner anti-rotating device ~ ~ A S S S S FZP FZP FZP FZP FZP E E E E E Cable assembly (pages and 8) FAA Fixed plug non-latching, nut fixing S maxi A B e E ) S S e FAA FAA FAA FAA 0E E E E 8 9. x x x x E maxi S P Panel cut-out (page ) ote: ) unipole model

80 F Elbow (90 ) plug, cable collet ~ S ~ A D H S S S ~H S S F F F 0E E E D Cable assembly (page ) FA Elbow (90 ) plug, cable collet ~ S ~ ERA Fixed socket, nut fixing e S E maxi maxi S ERA ERA ERA ERA ERA ERA EGG ) 0E E E E E E E A B e E ) S S 8 9. x x x x x x x ote: The E and E series are delivered with a round nut. ) unipole model. ) with key (G). ERC Fixed socket, nut fixing with slot in the flange maxi S A B e E F ) S S e F A D H S S S H S S FA FA E E D Cable assembly (pages and 8) P Panel cut-out (page ) ERC ERC ERC 0E E E 8 9. x x x E maxi S P Panel cut-out (page ) ote: ) unipole model 8

81 ERB Fixed socket, nut fixing with two flats in the flange maxi S S A B e E ) S S S e ERB ERB ERB ERB 0E E E E 8 9. x x x x E maxi S P Panel cut-out (page ) ote: ) unipole model EEP Fixed socket, nut fixing (back panel mounting) maxi S P A B e E ) P S e EEP EEP EEP EEP 0E E E E 8 8 x x x x E maxi P Panel cut-out (page ) ote: ) unipole model ote: the E series is delivered with a conical nut. EEP Fixed socket, nut fixing, with straight contact for printed circuit (back panel mounting) P A B e E P S S e EEP EEP EEP EEP 0E E E E 8 8 x x x x P Panel cut-out (page ) E maxi P PCB drilling pattern (page 9) ote: this contact type is available for all E socket models. See page 9 for table of available types. ength depends on the number of contacts, see PCB drilling pattern on page 9. The E series is delivered with a conical nut. EEP Fixed socket, nut fixing, with elbow (90 ) contacts for printed circuit (back panel mounting) P S A B e E P S 0 mini e E maxi EEP EEP E E P Panel cut-out (page ) 0 0 x x P PCB drilling pattern (page 0) ote: this contact type is available for all back panel mounting socket types. See page 0 for available types. ength depends on the number of contacts, see PCB drilling pattern on page 0. 9

82 EHP Fixed socket, nut fixing, protruding shell maxi S A B e E ) S S S e S E maxi S EHP EHP EHP 0E E E 8 9. x x x P Panel cut-out (page ) ote: ) unipole model PCA Free socket, cable collet A S S ~ PCA PCA PCA PCA PCA PCA PHG ) 0E E E E E E E Cable assembly (pages and 8) ote: ) with key (G) PCA Free socket with oversize cable collet ) A B S S ~ PCA PCA PCA PCA E E E E Cable assembly (pages and 9) S S ote: ) correspond to K type of collet, the fitting of oversize collets onto this model allows them to be fitted to the cables that can be accommodated by the next housing size up (see page 0). PCA Free socket, cable collet and nut for fitting a bend relief ) A S S ~ PCA PCA PCA PCA PCA 0E E E E E Cable assembly (pages and 8) ote: ) to order, add a «Z» at the end of the reference. The bend relief must be ordered separately (see page ). 80

83 PCP Free socket, cable collet and inner anti-rotating device ~ PCP PCP E E A S Cable assembly (pages and 8) S PSA Fixed socket, nut fixing, cable collet A B e E S S S maxi S PSA PSA PSA PSA PSA PSA PKG ) 0E E E E E E E 8 9. x x x x x x x e P Panel cut-out (page ) S E maxi S Cable assembly (pages and 8) ote: ) with key (G). The E and E series are delivered with a round nut. RA Free coupler Dim. (mm) A maxi RA RA RA RA RA RA 0E E E E E E ote: see page 0 for the available plug and contact configurations and in order to ensure correct contact alignment. 8

84 Watertight or vacuumtight models These socket or coupler models allow the device on which they are fitted to reach a protection index of IP 8 as per IEC 09. They are fully compatible with plugs of the same series and are widely used for portable radios, military, laboratory equipment, aviation, etc. These models are identified by a letter «P» at the end of the reference. ost of these models are also available in a vacuumtight version. Such models are identified by an additional letter «V» at the end of the part number (certificate on request). Epoxy resin is used to seal these models. Technical Characteristics echanical and Climatical Characteristics Value Standard Characteristics Value Standard Endurance Humidity Temperature range (0E-E) Temperature range (E-E) Salt spray corrosion test Climatical category eakage rate (He) ) > 000 cycles IEC 0- test 9a up to 9% at 0 C - 0 C/+00 C - 0 C/+80 C > 000h IEC 0- test f 0/80/ IEC 008- < 0 - mbar.l.s - IEC 0- test b aximum operating pressure ) 0E E E E E E E 0 bar 0 bar 0 bar 0 bar IEC 0- test d bar bar bar ote: ) only for vacuumtight models. ote: ) this value corresponds to the maximum allowed pressure difference for the assembled socket. HGP Fixed socket, nut fixing, watertight or vacuumtight maxi A B e E ) S S e S E maxi S HGP HGP HGP HGP HGP HGP HGP ) 0E E E E E E E 8 9. x x x x x x x P Panel cut-out (page ) ote: The E and E series are delivered with a round nut. ) unipole model. ) with key (G). EBR Fixed socket with round flange, watertight, protruding shell and screw fixing ~ H ~ H A B C H H ) EBR E ø C P Panel cut-out (page ) ote: ) unipole model. This model is only available in a watertight version. 8

85 SWH Fixed coupler, nut fixing, watertight or vacuumtight A B e E S S e S SWH SWH SWH SWH SWH SWH SWH ) 0E E E E E E E 8 9. x x x x x x x E maxi S P Panel cut-out (page ) ote: ) with key (G). The E and E series are delivered with a round nut. See page 0 for the available plug and contact configurations and in order to ensure correct contact alignment. 8

86 series connectors have been specifically designed for outdoor applications. This series offer superior polarization combining the stepped insert (half-moon) of the S/E series with the keying system of the K series. They include an inner sleeve and two seals to prevent penetration of solids or liquids into the housing formed by the plug, free socket, fixed socket or coupler. All models of this series are watertight when mated to give a protection index of IP8 as per IEC 09 standard (in mated condition) when correctly assembled to an appropriate cable (IP otherwise). series connectors have the same insulators as the S series and have the following main features: security of the Push-Pull latching system watertight connection (IP 8/IP ) multipole types to 0 contacts solder, crimp or print (straight) contacts stepped insert (half-moon) fitted multiple key options to avoid cross mating with male and female contacts of similar connectors high packing density for space savings 0 screening for full EC shielding keying system («G» key standard) for connector alignment rugged housing for extreme working conditions. etal housing models (page 8) Fixed plug Straight plugs Fixed sockets Free sockets FAG Elbow plug FGG EGG PHG FHG FGG EEG PHG FGG PHG Vacuumtight model (page 89) Fixed socket Fixed socket PKG HGG 8

87 Part umbering System Plug FG G.. 0. C A C Variant: (page 0) Cable ø: (page 0) Collet type: (page 0) Fixed socket EG G.. 0. C Y : (page 8) Alignment key: (page 90) : (page 8) Insert configuration: (page 9) Variant: (page 0) Contact: (page 99) Insulator: (page 99) Housing: (page 99) Part umber Example Straight plug with cable collet: FGG..0.CAC = straight plug with key (G) and cable collet, series, multipole type with contacts, outer shell in chrome-plated brass, PEEK insulator, with male and female solder contacts, C type collet for. mm diameter cable. Fixed socket: EGG..0.CY = fixed socket, nut fixing, with key (G), series, multipole type with contacts, outer shell in chromeplated brass, PEEK extended insulator, with female and male crimp contacts. Part Section Showing Internal Components Straight plug 8 Fixed socket outer shell earthing crown retaining ring hexagonal nut insulator male contact female contact o-ring outer shell latch sleeve inner shell retaining ring collet nut split insert carrier insulator 8 male contact 9 female contact 0 earthing cone collet gasket washer 8

88 etal housing models Technical Characteristics echanical and Climatical Electrical Characteristics Value Standard Characteristics Value Standard Endurance Humidity Temperature range ) Resistance to vibrations Shock resistance Salt spray corrosion test Protection index (mated) ) Climatical category > 000 cycles IEC 0- test 9a up to 9% at 0 C - C, +00 C Hz, g IEC 0- test d 00 g, ms IEC 0- test c > 000h IEC 0- test f IP 8/IP IEC 09 0// IEC 008- Shielding efficiency at 0 Hz at GHz > 9 db IEC 09-- > 80 db IEC 09-- ote: The various tests have been carried out with FGG and EGG connector pairs, with chrome-plated brass shell, PEEK insulator and silicone O-ring. Detailed electrical characteristics, as well as materials and treatment are presented in the chapter Technical Characteristics on page. ) minimum operating temperature is -0 C for sockets fitted with an FP (Viton ) O-ring. ) IP8 achieved providing that the cable is perfectly circular and that assembly process ensures a high integrity seal. FGG Straight plug, key (G) or keys (A to C and ), cable collet ~ A S ~ FGG FGG FGG Cable assembly (page 0) S FGG Straight plug, key (G) or keys (A to C and ), cable collet and oversize cable collet ) ~ A B S S ~ FGG FGG Cable assembly (page 0) S S ote: ) correspond to K type of collet, the fitting of oversize collets onto this model allows them to be fitted to the cables that can be accommodated by the next housing size up (see page 0). FGG Straight plug, key (G) or keys (A to C and ), cable collet and nut for fitting a bend relief ) A S ~ ~ FGG FGG FGG Cable assembly (page 0) S ote: ) to order, add a «Z» at the end of the reference. The bend relief must be ordered separately (see page ). 8

89 FAG Fixed plug, nut fixing, non-latching, key (G) or keys (A to C and ) maxi S A B e E ) S S e FAG.0 0x E maxi S P Panel cut-out (page ) ote: ) maximum length with crimp contacts. ~ FHG Elbow (90 ) plug, key (G) or keys (A to C and ), cable collet S ~ A D H S S S ~H S S FHG FHG FHG D Cable assembly (page 0) EGG Fixed socket, nut fixing, key (G) or keys (A to C and ) maxi S A B e E ) S S e EGG EGG EGG x x x E maxi S P Panel cut-out (page ) ote: ) maximum length with crimp contacts. maxi EEG Fixed socket, nut fixing, key (G) or keys (A to C and ) (back panel mounting) P S A B e E ) P S e EEG EEG EEG x x x E maxi P Panel cut-out (page ) ote: ) maximum length with crimp contacts. 8

90 PHG Free socket, key (G) or keys (A to C and ), cable collet A S ~ PHG PHG PHG S Cable assembly (page 0) PHG Free socket, key (G) or keys (A to C and ), cable collet and oversize cable collet ) ~ A B S S PHG PHG S S Cable assembly (page 0) ote: ) correspond to K type of collet, the fitting of oversize collets onto this model allows them to be fitted to the cables that can be accommodated by the next housing size up (see page 0). PHG Free socket, key (G) or keys (A to C and ), cable collet and nut for fitting a bend relief ) A S ~ PHG PHG PHG S Cable assembly (page 0) ote: ) to order, add a «Z» at the end of the reference. The bend relief must be ordered separately (see page ). PKG Fixed socket, nut fixing, key (G) or keys (A to C and ), cable collet ~ S A B e E S S S e PKG PKG PKG x x x Cable assembly (page 0) S E maxi S P Panel cut-out (page ) 88

91 Watertight or vacuumtight models This socket model allow the device on which they are fitted to reach a protection index of IP8 as per IEC 09. This model is also available in a vacuumtight version. It is identified by the letter «PV» at the end of the part number (certificate on request). Epoxy resin is used to seal this model. Technical Characteristics echanical and Climatical Characteristics Value Standard Characteristics Value Standard Endurance Humidity Temperature range (0-) Temperature range () Salt spray corrosion test > 000 cycles IEC 0- test 9a up to 9% at 0 C - 0 C/+00 C - 0 C/+80 C > 000h IEC 0- test f Climatical category eakage rate (He) aximum operating pressure ) 0 0/80/ IEC 008- < 0 - mbar.l.s - IEC 0- test b 0 bar 0 bar IEC 0- test d 0 bar ote: ) this value corresponds to the maximum allowed pressure difference for the assembled socket. HGG Fixed socket, nut fixing, key (G) or keys (A to C and ), vacuumtight maxi S A B e E S S e HGG HGG HGG x x x E maxi S P Panel cut-out (page ) 89

92 Alignment Key ( series) Alignment Key and Polarized Keying System series connector model part numbers are composed of three letters. The AST ETTER indicates the key position and the contact type (male or female). Front view of a socket α b of keys Angles 0 Plug Contact type Socket ote γ G A α B J γ male male male female male female female female male female ) ote: ) that contact type is not as for the K series. First choice alternative Special order alternative 90

93 Insert configuration (S, E and series) Unipole ale solder contacts Female solder contacts Standard Watertight (mm) Solder Contact type Crimp Test voltage (kv rms) ) Test voltage (kv dc) ) Rated current (A) ) ) S 0E S E 0 0S 0E. ).. S E.0 ) S E.0.. S E 0 S E S E S E 0 S E S E.0.. S E 0 S S E S E S E ote: ) see calculation method, caution and suggested standard on page 8. ) also available with inversed contacts: plug = female, socket = male. 9

94 ultipole ale solder contacts Female solder contacts Standard Watertight umber of contacts (mm) Solder Contact type Crimp Print (straight) Print (elbow) ) ) Test voltage (kv rms) ) ) Test voltage (kv dc) Rated current (A) ) 0S 0E S 0E ) 0S 0E ) 0S 0E ) 0 0S 0E S E 0 0 S E...8 ) S E ) 0 S E ) 0 0 S E ) 0... ) S E 0... ) S E 0 0 S E... 0 ) S E... ) 0 S E... ) S E... ) S E. ).. S E ) 9 ) S E ) S E ) S E 0 S E S E S E S E S E S E..0. ote: ) see calculation method, caution and suggested standard on page 8. ) lowest measured value; contact to contact or contact to shell. ) rated current = A for socket with elbow (90 ) contacts for printed circuit. ) rated current = A for socket with elbow (90 ) contacts for printed circuit. ) only for FF model. First choice alternative Special order alternative 9

95 ultipole ale solder contacts Female solder contacts Standard Watertight umber of contacts (mm) Solder Contact type Crimp Print (straight) Print (elbow) ) ) Test voltage (kv rms) ) ) Test voltage (kv dc) Rated current (A) ) S E S E S E S E S E S E S E S E S E 0 S E S E S E S E S E S E S E S E S E S E S ote: ) see calculation method, caution and suggested standard on page 8. ) lowest measured value; contact to contact or contact to shell. First choice alternative Special order alternative 9

96 ultipole ale solder contacts Female solder contacts Standard Watertight umber of contacts (mm) Solder Contact type Print (straight) Print (elbow) ) ) Test voltage (kv rms) ) ) Test voltage (kv dc) Rated current (A) ) S E S E S E S E S E S E S E S E 0 S E S E S E S E S E S E S E ote: ) see calculation method, caution and suggested standard on page 8. ) lowest measured value; contact to contact or contact to shell. 9

97 ultipole ale solder contacts Female solder contacts Standard Watertight umber of contacts (mm) Solder Contact type Print (straight) Print (elbow) ) ) Test voltage (kv rms) ) ) Test voltage (kv dc) Rated current (A) ) S E S E S E S E S E S E S E S E S E S E S E S E S E ote: ) see calculation method, caution and suggested standard on page 8. ) lowest measured value; contact to contact or contact to shell. 9

98 ultipole ale solder contacts Female solder contacts Standard Watertight umber of contacts (mm) Solder contacts ) ) Test voltage (kv rms) ) ) Test voltage (kv dc) Rated current (A) ) S E 0 E S E S.0 E E S S E ote: ) see calculation method, caution and suggested standard on page 8. ) lowest measured value; contact to contact or contact to shell. 9

99 ultipole ale solder contacts Female solder contacts Standard Watertight umber of contacts (mm) Solder contacts ) ) Test voltage (kv rms) ) ) Test voltage (kv dc) Rated current (A) ) S E 8 8 S E S E E S E E ote: ) see calculation method, caution and suggested standard on page 8. ) lowest measured value; contact to contact or contact to shell. 9

100 ultipole ale solder contacts Female solder contacts Standard Watertight umber of contacts (mm) Solder contacts ) ) Test voltage (kv rms) ) ) Test voltage (kv dc) Rated current (A) ) S E S E S E E S E S E E S ote: ) see calculation method, caution and suggested standard on page 8. ) lowest measured value; contact to contact or contact to shell. 98

101 Housings (S, E and series) Ref. C D K S T U B G P R H Outer shell and collet nut atch sleeve + earthing crown Other metallic components aterial Surf. treatment aterial Surf. treatment aterial Surf. treatment Remarks Brass chrome brass/bronze nickel ) brass nickel Brass gold-plated brass/bronze nickel ) brass nickel Brass nickel brass/bronze nickel ) brass nickel Brass black chrome brass/bronze nickel ) brass nickel Stainless steel brass/bronze nickel ) brass nickel Stainless steel stainless steel brass nickel Stainless steel stainless steel stainless steel Aluminium alloy anodized brass/bronze nickel ) brass nickel ) PO (black) brass/bronze nickel ) brass nickel Only for FFP, ER and PCP (S series) PEEK (natural) brass/bronze nickel ) brass nickel Only for FFP, ER and PCP (S series) PSU brass/bronze nickel ) brass nickel Only for FF (S series) ) PPSU brass/bronze nickel ) brass nickel Only for FF (S series) ) PPS/brass /nickel brass/bronze nickel ) brass nickel Only for EP and EXP (S series) ote ote: detailed characteristics of these materials and treatments are presented on page. ) see «variant» for the colour. ) in the E and series, the latch sleeve is chrome-plated. First choice alternative Special order alternative Insulators (S, E and series) Ref. Y T T V aterial Contact type Remarks ote PEEK Solder or print PEEK Crimp PTFE Solder only for unipole types FEP Solder only for multipole types of the S or E series PI Solder only for multipole types of the S or E series PA. Solder material for S/E and S/E series multipole inserts ote: detailed characteristics of these materials are presented on page. First choice alternative Special order alternative Contacts (S, E and series) Soldering characteristics no need to order specific tools, a simple soldering iron is sufficient ideal for very small and fragile conductors contacts with solder cups to allow the solder to flow Crimping characteristics practical, quick contact fixing outside the insulator possible use at high temperature need to order specific tools no risk of heating the insulator during the conductorcontact fixing high tensile strength totally lead-free solution ote: see page for more information. 99

102 Contacts reference for plugs, free or fixed sockets Contact type ale Female Contact ø C Form (mm) (mm) per fig. AWG max. Solid Section max. (mm ) Conductor Stranded AWG Section (mm ) min. max. min. max. F r ) () otes fig. fig. Solder Crimp ø C ø C ø C ø C ø C ø C A C B C B G C B G C B C B P P U P U P P ) ) ) ) ) ) ) Print ø C ø C D dimensions and C are detailed in the section on PCB drilling pattern. See page 9. Print (elbow) V V dimensions and C are detailed in the section on PCB drilling pattern. See page 0. ø C ote: ) contact retention force in the insulator (according to IEC 0-8 test a). ) for a given AWG, the diameter of some stranded conductor designs is larger than the solder cup diameter. ake sure that the maximum conductor diameter is smaller than ø C. First choice alternative Special order alternative Contacts reference for coupler and plug with socket Ref. Contact type Remarks A F ale - Female contact configuration is explained on page 0 Female - ale contact configuration is explained on page 0 Female - Female contact configuration is explained on page 0 Female - Female - ale for the FTA model of the S series 00

103 Contacts reference for fixed and free couplers RA, RAD and SWH A ale - Female Female - ale Female - Female for plug for plug for plug for plug for plug for plug Unipole A A Unipole A Unipole A A ultipole (odd) A ultipole (odd) A ) A ultipole (even) A ) A ultipole (even) A ) Use of plugs for mating with RAD, RA and SWH couplers Unipole type: for coupling two identical plugs fitted with male contact (contact reference A). for coupling a plug fitted with male contacts (contact reference A) at the flange end for RAD and SWH and an inverted plug fitted with female contacts (contact reference ) at the other end. A for the inverted version of code. ultipole type: for coupling a standard plug (contact reference A) at the flange end for RAD and SWH and an inverted plug (contact reference as indicated in the above table) at the other end. for coupling two standard plugs (contact type A). Only available for RAD and RA models. ote: ) this connector combination does not allow for contact numbering. One of the plugs has to be cable mounted in a way to ensure correct signal continuity. 0

104 Collets (S, E and series) C, K and type collets for S series C type K type oversize cable collet type (non EC) Type Code Collet ø Cable ø max. min. otes Type Code Collet ø Cable ø max. min. otes 00 0S C C C C K K C C C C K K K >... >.... >... >.... > >... >.... >... >.... >.... > >... > ) ) ) ) ) ) ) ) ) ) S C C C C C C K K 8 K >... >... >.... >.... >... > > > >... >... >... >....9 ) ) ) ) ) ) ) ote: ) these collets cannot be used for connectors models with nut for fitting a bend relief. ) these collets cannot be used for elbow connectors. ) the inner diameter of the smallest bend relief available is. mm. All dimensions are in millimetres. 0

105 C, K and type collets for S series C type K type oversize cable collet type (non EC) Type Code Collet ø Cable ø max. min. otes Type Code Collet ø Cable ø max. min. otes S S C C C C C C C 8 C 8 K 9 K 8 8 C C C C 8 C 9 C K K >... >... >... >.... > > > > > >... >... >... > > > >... > > > > 9. ) ) ) ) ) ) ) ) ) ) ) ) ) ) ) S C C C C 8 C 9 C 0 C C C K K K K K 8 K 9 K 0 K K ) ) ) ) ) ) ) ) ) ) ) ) ) ) ) ) ) ) ote: ) these collets cannot be used for connectors models with nut for fitting a bend relief. ) these collets cannot be used for elbow connectors. All dimensions are in millimetres. 0

106 C, K and type collets for S series C type K type oversize cable collet type (non EC) Type Code Collet ø Cable ø max. min. otes Type Code Collet ø Cable ø max. min. otes S C C 8 C 9 C 0 C C C C C C C C 8 C 9 C 0 C C K K K K K K 8 K 9 K ) ) ) ) ) ) ) ) ) ) ) ) ) ) ) ) ) ) ) ) ) ) ) ) ) ) ) ) ) ) ) ) ) ) ) ) ) ) ) ) ) ) ) ) ) ) ) ) ) ) S C C C C C C C 8 C 9 C 0 C C C C C C C C 8 C 9 C ) ) ) ) ) ) ) ) ) ) ) ) ) ) ) ) ) ) ) ) ) ) ) ) ) ) ) ) ) ) ) ) ) ) ) ) ) ) ) ) ) ) ) ) ) ) ) ) ) ) ) ) ) ) ) ) ) ote: The S. is only available with type of collet. ) these collets cannot be used for connectors models with nut for fitting a bend relief. ) these collets cannot be used for elbow connectors. All dimensions are in millimetres. 0

107 C and K type collets for E series C type K type oversize cable collet Type Code Collet ø Cable ø max. min. otes Type Code Collet ø Cable ø max. min. 0E E E C 0 C C 0 C C 0 C C 0 C C 0 C C 0 C C 0 C C 0 C C 0 C C 0 C K 0 K K 80 K 8 C C 0 C C 0 C C 0 C C 0 C C 0 C C 0 C C 80 C 8 K 90 K 9 K 0 K ote: ) the inner diameter of the smallest bend relief available is. mm. All dimensions are in millimetres. ) ) ) E E C 0 C C 0 C C 0 C C 0 C C 0 C C 80 C 8 C 90 C 9 C 0 C K K K K K C 0 C C 0 C C 0 C C 80 C 8 C 90 C 9 C 0 C C C C C K K K 8 K 9 K 0 K K K

108 C and K type collets for E series C type K type oversize cable collet Collet ø Cable ø Collet ø Cable ø Type Code max. min. Type Code max. min. E C 0 C C C C C C C C 8 C 9 C 0 C C C E C C C C C 8 C C C C 0 ote: all dimensions are in millimetres C and K type collets for series C type K type oversize cable collet Collet ø Cable ø Collet ø Cable ø Type Code max. min. Type Code max. min. 0 C 0 C C 0 C C 0 C C 0 C C 0 C C 0 C C 0 C C 0 C C 0 C C 0 C K 0 K K 80 K C C 0 C C 0 C C 0 C C 0 C C 0 C C 0 C C 80 C 8 K 90 K 9 K 0 K ote: all dimensions are in millimetres

109 Variant (S, E and series) Bend relief for S series models with collet eed to be ordered Bend relief for E and series models with collet eed to be ordered Ref. Type Collet Code eed to be ordered separately (see pages and ) Ref. Type Collet Code eed to be ordered separately (see pages and ) 00 0S S S S S Z Z Z Z Z Z C to K to to C to K to to 8 C to K to 8 to C to 8 K 9 to to 8 C to 9 K to to 9 C 8 to 8 to GA.00.0.D GA.0B.0.D GA.00.0.D GA.0B.0.D GA.B.0.D GA.0B.0.D GA.B.0.D GA.B.0.D GA.B.0.D GA.B.0.D GA.B.0.D GA.B.0.D GA.B.0.D GA.B.0.D GA.B.0.D GA.B.0.D GA.B.0.D 0E 0 E E E E Z Z Z Z Z C 0 to 0 C to K 0 to 8 C to 8 K 90 to 0 C 0 to 0 K to C 0 to ote: All dimensions are in millimetres. GA.0B.. GA.B.. GA.B.. GA.B.. GA.B.. GA.B.. GA.B.. GA.B.. Colour of connectors shell made of plastic material and aluminium alloys Colour Plastic shell PSU PPSU PA. Anodized colour Aluminium alloys Anodized colour for bend relief collet nut A B G J R S T V X F blue white grey yellow brown black red orange natural green black natural cream ote: other anodizing colours are available for connectors with collet nut for bend relief. Please consult us. Watertight and vacumtight socket and coupler models (S, E and series) S E EWB, HCP, HGP, HGW, SWH EBR, HGP, SWH Watertight Vacuumtight P P PV PV HGG P PV O-ring and gasket material (E and series) Standard connectors are delivered with silicone o-ring and gaskets. The vacuumtight models, identified with the letter «PV», are delivered with Viton gaskets. Other gaskets material can be delivered upon special request. O-ring material FP (Viton ) EPD FP (Viton ) and collet nut for bend relief H E D 0

110 08

111 G SERIES C SERIES

112 G The G series with key (G) provides the same advantages of space saving due to its small dimensions as the C series and is available in multipole type with 8 contacts. etal housing models (page ) Straight plugs Fixed sockets Free sockets FGG EGG ECG PHG FGG ECG EYG PHG Part umbering System Plug FGG. G. 8. C A D Variant: (page ) Cable ø: (page ) Collet type: (page ) Fixed socket EGG. G. 8. C Variant: (page ) : (page ) : G Insert configuration: (page ) Contact: (page ) Insulator: = PEEK Housing: (page ) Part umber Example Straight plug with cable collet: FGG.G.8.CAD = straight plug with cable collet, G series, multipole type with 8 contacts, outer shell in chrome-plated brass, PEEK insulator, male solder contacts, D type collet for. mm diameter cable. Fixed socket: EGG.G.8.C = fixed socket, G series, multipole type with 8 contacts, outer shell in chrome-plated brass, PEEK insulator, female solder contacts. Part Section Showing Internal Components Fixed socket outer shell hexagonal nut locking washer insulator female contact Straight plug outer shell latch sleeve collet nut split centre-piece insulator male contact collet 0

113 etal housing models Technical Characteristics echanical and Climatical Characteristics Value Standard Endurance Humidity Temperature range Salt spray corrosion test Protection index Climatical category > 00 cycles IEC 0- test 9a up to 9% at 0 C - C + 0 C > 000h IEC 0- test f IP0 IEC 09 // IEC 008- ote: The various tests have been carried out with FGG and EGG connector pairs, with chrome-plated brass shell and PEEK insulator. Detailed electrical characteristics, as well as materials and treatment are presented in the chapter Technical Characteristics on page. FGG.G Straight plug, key (G), cable collet FGG.G Straight plug, key (G), cable collet and nut for fitting a bend relief ) ~ ~ ø S 0. EGG.G Fixed socket, nut fixing, key (G) ECG.G Fixed socket with two nuts, key (G) (back panel mounting). maxi. maxi S.8 S. ø 9. x ø 8 ø 9. x x ø 0 ø S Cable assembly (page ) Cable assembly (page ) ote: ) to order, add a «Z» at the end of the reference. The bend relief must be ordered separately (see page ). S.8 maxi S.8. maxi Panel cut-out (page ) Panel cut-out (page ) ECG.G Fixed socket with two nuts, key (G), straight contact for printed circuit (back panel mounting) EYG.G Fixed socket, key (G), protruding shell (screw fixing on the panel) ø 9. x S.. x ø 0 x 0.. maxi 8. ø S.8. maxi Panel cut-out (page ) Panel cut-out (page ) PCB drilling pattern (page ) ote: all dimensions are in millimetres.

114 PHG.G Free socket, key (G), cable collet PHG.G Free socket, key (G), cable collet and nut for fitting a bend relief ) ~8. ø ø S 0. S Cable assembly (page ) Cable assembly (page ) ote: ) to order, add a «Z» at the end of the reference. The bend relief must be ordered separately (see page ). Insert configuration (G series) ale solder contacts Female solder contacts umber of contacts (mm) Solder Contact type Print Test voltage (kv rms) ) Test voltage (kv dc) ) Rated current (A) ) G ote: ) see calculation method, caution and suggested standard on page 8. ) lowest measured value; contact to contact or contact to shell. Housings (G series) Ref. C K Outer shell and collet nut atch sleeve Other metallic components aterial Surf. treatment aterial Surf. treatment aterial Surf. treatment Brass chrome brass/bronze nickel brass nickel Brass nickel brass/bronze nickel brass nickel Brass black chrome brass/bronze nickel brass nickel ote: detailed characteristics of these materials and treatments are presented on page. ote First choice alternative Special order alternative

115 Contacts (G series) Ref. A Contact type ale solder Female solder Female print Collets (G series) D type collets for G series D type Collet ø Cable ø Type Code max. min. G D D D D ote: all dimensions are in millimetres. Variant (G series) Bend relief for G series models with collet eed to be ordered Ref. Type Collet Code eed to be ordered separately (see pages and ) G Z D to 80 GA.B..

116 Accessories (G series) BRE Blanking caps for fixed and free sockets B Part number BRE.G.00.AS A B ø. ote: these caps are suitable for use with any alignment key configuration. The last letter «S» of the part number stands for the material of the O ring (silicone rubber). O-ring s made from FP are also available; if required, replace the letter «S» by «V». Body material: ickel-plated brass (i µm) anyard material: Stainless steel O-ring material: Silicone rubber or FP aximum operating temperature: 00 C Watertightness: IP according to IEC 09 BRF Blanking caps for fixed sockets B Part number A B BRF.G.00.AS sliding loop ote: this caps are suitable for use with any alignment key configuration. The last letter «S» of the part number stands for the material of the O ring (silicone rubber). O-ring s made from FP are also available; if required, replace the letter «S» by «V». Body material: ickel-plated brass (i µm) anyard material: Stainless steel O-ring material: Silicone rubber or FP aximum operating temperature: 00 C Watertightness: IP according to IEC 09 FF ut for bend relief ø C Part number FF.C.0.C A C S 8. S ote: for bend reliefs to be used with this nut see section «Accessories» page. aterial: Chrome-plated brass (0. µm) ote: other accessories are also available. See section «Accessories» on page.

117 Tooling (G series) Please consult the «Tooling» section (page ). Panel cut-outs (G series) Panel cut-outs PCB drilling pattern EGG - ECG EYG mini mini ø x 0. ø 0. 0 ø. ø. ote: mounting nut torque: m ( = 0.0 kg) Cable assembly (G series) Cable stripping lengths (G series) T Connector Type ø contact A (mm) Cable stripping lengths (mm) S T S G ote: the tolerances on these dimensions are: : ± 0. mm; S: ± 0. mm; T: ± 0. mm.

118 C In many applications, it is necessary to use multipole connectors which have shortened dimensions but require high contact density. EO short series connectors, which are shorter than 0 mm, perfectly meet these needs. The C series, featuring a hermaphroditic insert, is available in multipole type up to contacts. etal housing models (page ) Fixed plug Straight plugs Fixed sockets Free sockets Fixed socket Watertight or vacuumtight models (page 9) Fixed sockets FAA FFA ERA ECP PCA PSA ERY HGP HEP FFA ECP EEP PCA Part umbering System Plug FFA. C. 0. C A C Variant: (page ) Cable ø: (page ) Collet type: (page ) Fixed socket ERA. C. 0. C Variant: (page ) : (page ) : C Insert configuration: (page 0) Contact: (page 0) Insulator: = PEEK Housing: (page 0) Part umber Example Straight plug with cable collet: FFA.C.0.CAC = straight plug with cable collet, C series, multipole type with contacts, outer shell in chromeplated brass, PEEK insulator, male solder contacts, C type collet for. mm diameter cable. Fixed socket: ERA.C.0.C = fixed socket, nut fixing, C series, multipole type with contacts, outer shell in chrome-plated brass, PEEK insulator, female solder contacts. Part Section Showing Internal Components Fixed socket outer shell hexagonal nut locking washer insulator male contact female contact 8 8 Straight plug outer shell latch sleeve collet nut split centre-piece insulator male contact female contact collet

119 etal housing models Technical Characteristics echanical and Climatical Characteristics Value Standard Endurance Humidity Temperature range Salt spray corrosion test Protection index Climatical category > 00 cycles IEC 0- test 9a up to 9% at 0 C - C + 0 C > 000h IEC 0- test f IP0 IEC 09 // IEC 008- ote: The various tests have been carried out with FFA and ERA connector pairs, with chrome-plated brass shell and PEEK insulator. Detailed electrical characteristics, as well as materials and treatment are presented in the chapter Technical Characteristics on page. FFA.C Straight plug, cable collet FFA.C Straight plug, cable collet and nut for fitting a bend relief ) ~ ~ ø S 0. FAA.C Fixed plug, nut fixing, non-latching ERA.C Fixed socket, nut fixing S maxi 9.. maxi S.8 ø 9. x ø 8 ø 9. x ø 8 ø S Cable assembly (page ) Cable assembly (page ) ote: ) to order, add a «Z» at the end of the reference. The bend relief must be ordered separately (see page ).. maxi S.8 S.8 maxi Panel cut-out (page ) Panel cut-out (page ) ECP.C Fixed socket with two nuts (back panel mounting) ECP.C Fixed socket with two nuts, straight contact for printed circuit (back panel mounting) S. maxi. S.. ø 9. x x ø 0 ø 9. x x ø 0 S.. maxi S.. maxi Panel cut-out (page ) ote: all dimensions are in millimetres. Panel cut-out (page ) PCB drilling pattern (page )

120 EEP.C Fixed socket, nut fixing (back panel mounting) ERY.C Fixed socket, protruding shell, (screw fixing on the panel). maxi S.. ø 9. x ø 0 x 0.. maxi 8. PCA.C Free socket, cable collet PCA.C Free socket, cable collet and nut for fitting a bend relief ) ~8. ø S 0. PSA.C Fixed socket nut fixing, cable collet ~8 S.8 ø 9. x ø 8 ø ø. maxi 9. Panel cut-out (page ) Panel cut-out (page ) S Cable assembly (page ) Cable assembly (page ) ote: ) to order, add a «Z» at the end of the reference. The bend relief must be ordered separately (see page ). S 0. S.8 maxi Panel cut-out (page ) ote: all dimensions are in millimetres. 8

121 Watertight or vacuumtight models These socket allow the device on which they are fitted to reach a protection index of IP8 as per IEC 09. They are fully compatible with plugs of the same series and are widely used for portable radios, military, laboratory equipment, aviation, etc. These models are identified by a letter «P» at the end of the reference. These models are also available in a vacuumtight version. Such models are identified by an additional letter «V» at the end of the part number (certificate on request). Epoxy resin is used to seal these models. Technical Characteristics echanical and Climatical Characteristics Value Standard Characteristics Value Standard Endurance Humidity Temperature range Salt spray corrosion test > 00 cycles IEC 0- test 9a up to 9% at 0 C - 0 C, +80 C > 000h IEC 0- test f Climatical category eakage rate (He) ) aximum operating pressure ote: ) only for vacuumtight models. 0/80/ IEC 008- < 0 - mbar.l.s - IEC 0- test b bar IEC 0- test d HGP.C Fixed socket, nut fixing, watertight or vacuumtight HEP.C Fixed socket, nut fixing, watertight or vacuumtight (back panel mounting) 0 maxi S.8 0 maxi. 0.. ø 9. x ø 0 ø 0 x ø 0 S maxi. maxi S.8 Panel cut-out (page ) Panel cut-out (page ) 9

122 Insert configuration (C series) ale solder contacts Female solder contacts umber of contacts (mm) Solder Contact type Print ) ) Test voltage (kv rms) ) ) Test voltage (kv dc) Rated current (A) ) C ote: ) see calculation method, caution and suggested standard on page 8. ) lowest measured value; contact to contact or contact to shell. Housings (C series) Ref. C K Outer shell and collet nut atch sleeve Other metallic components ote aterial Surf. treatment aterial Surf. treatment aterial Surf. treatment Brass chrome brass/bronze nickel brass nickel Brass nickel brass/bronze nickel brass nickel Brass black chrome brass/bronze nickel brass nickel ote: detailed characteristics of these materials and treatments are presented on page. First choice alternative Special order alternative Contacts (C series) Ref. A Contact type ale solder Female solder Female print ultipole connectors are fitted with hermaphroditic inserts including male and female contacts. However, by convention, the letter indicating the contact type in the part number composition will be the male contact (reference A) for plugs and female contact (reference ) for sockets. 0

123 Collets (C series) C and type collets for C series C type type (non EC) Collet ø Cable ø Collet ø Cable ø Type Code max. min. Type Code max. min. C C C C C C C C C C C C C 80 ote: all dimensions are in millimetres C Variant (C series) Bend relief for C series models with collet eed to be ordered Ref. Type Collet Code eed to be ordered separately (see pages and ) C Z C to 80 to 8 GA.B.0.D GA.B.0.D Watertight and vacumtight socket models (C series) C HEP HGP Watertight Vacuumtight P PV

124 Accessories (C series) Accessories for the C series are identical with the G series. Please refer to corresponding pages (page ). Tooling (C series) Please consult the «Tooling» section (page ). Panel cut-outs (C series) Panel cut-outs PCB drilling patterns mini B (mm) B (mm) 08 0 ø 0. ø 0. B ø ECP EEP ERA FAA HEP HGP PSA (x) (x)..8.8 ERY mini ø 0. ø 0.. (x).. x 0. ote: mounting nut torque: m ( = 0.0 kg) (x). Cable assembly (C series) Cable stripping lengths (C series) T Connector Type ø contact A (mm) Cable stripping lengths (mm) S T S 0. C 0/0/0. 08/0// ote: the tolerances on these dimensions are: : ± 0. mm; S: ± 0. mm; T: ± 0. mm.

125 D SERIES (quadrax)

126 D D series QUADRAX connectors have four concentric contacts insulated from the connector shell. Specially developed for major radio and television channels, this new connector type provides the possibility of blind mating with the full security of the EO Push-Pull self-latching system. etal housing models (page ) Fixed plug Straight plugs Fixed socket Free sockets Bridge plug FAA FFA ER PCA FFA PCA CFF, CRF Part umbering System Plug FFA. D. 9. C D Variant: (page 8) Cable ø: (page ) Collet type: (page ) Fixed socket ER. D. 9. C A Variant: (page 8) : (page ) : D Insert configuration: (page ) 9 = quadrax Contact: (page ) Insulator: = PA. Housing: (page ) Part umber Example Straight plug with cable collet: FFA.D.9.CD = straight plug with cable collet, D series, quadrax type, outer shell in chrome-plated brass, PA. insulator, female solder contacts, D type collet for. mm diameter cable. Fixed socket: ER.D.9.CA = fixed socket, D series, quadrax type, outer shell in chrome-plated brass, PA. insulator, male solder contacts. Part Section Showing Internal Components Fixed socket Straight plug outer shell earthing crown retaining ring hexagonal nut locking washer insulator printed circuit male contact male intermediate contact female intermediate contact outer shell latch sleeve collet nut split centre-piece insulator printed circuit female contact male intermediate contact female intermediate contact collet

127 etal housing models Technical Characteristics echanical and Climatical Electrical Characteristics Value Standard Characteristics Value Standard Endurance Temperature range ) Salt spray corrosion test Protection index > 000 cycles IEC 0- test 9a -0 C, +0 C > 000h IEC 0- test f IP0 IEC 09 ote: ) for bridge plug: -0 C, +80 C Detailed electrical characteristics, as well as materials and treatment are presented in the chapter Technical Characteristics on page. Insulation resistance Insul. res. after 8h 9%RH Screening efficiency Contact resistance at 0 Hz at GHz > 0 Ω IEC 0- test a > 0 0 Ω IEC 0- test a > 0 db IEC 09-- > db IEC 09-- < 0mΩ IEC 0- test a FFA Straight plug, cable collet Part number ~ ~ ø FFA.D.9.CD FFA.D.9.CD FFA.D.9.CD FFA.D.9.CD FFA.D.9.CD S 9 S 0 Cable assembly (page 8) FFA Straight plug, cable collet and nut for fitting a bend relief Part number ø FFA.D.9.CDZ FFA.D.9.CDZ FFA.D.9.CDZ FFA.D.9.CDZ Cable assembly (page 8) S 9 S 0 ote: The bend relief must be ordered separately (see page ). FAA Fixed plug, nut fixing, non-latching. S.. Part number ø.8 x ø FAA.D.9.C Panel cut-out (page 8) maxi S 0.

128 ER Fixed socket nut fixing, with earthing tag. maxi S 9.. Part number ø.8 x. maxi ø S 0. ER.D.9.CA Panel cut-out (page 8) CFF CRF Bridge plug with two non-latching plugs Bridge plug with two non-latching plugs with monitoring output Part number CFF.D.9.PG CRF.D.9.PFG 0 ote: the last letter (G) of the part number indicates the grey colour of the housing. For other colours, replace this letter (G) by the one corresponding to the required colour.. PCA Free socket, cable collet ~0 ø. Part number PCA.D.9.CAD PCA.D.9.CAD PCA.D.9.CAD PCA.D.9.CAD PCA.D.9.CAD S 9 S 0 Cable assembly (page 8) PCA Free socket, cable collet and nut for fitting a bend relief Part number 9. S 9 S 0 ø. PCA.D.9.CADZ PCA.D.9.CADZ PCA.D.9.CADZ PCA.D.9.CADZ Cable assembly (page 8) ote: The bend relief must be ordered separately (see page ).

129 Insert configuration (D series) ale solder contacts Female solder contacts umber of contacts Contact type Solder ) ) Test voltage (kv rms) ) ) Test voltage (kv dc) Rated current (A) ) ote: ) see calculation method, caution and suggested standard on page 8. ) lowest measured value; contact to contact or contact to shell. Housings (D series) Ref. Outer shell and collet nut atch sleeve + earthing crown Other metallic components Remarks ote aterial Surf. treatment aterial Surf. treatment aterial Surf. treatment C P Brass chrome brass/bronze nickel brass nickel PA. brass/bronze nickel brass nickel Only for CFF and CRF bridge plug ) ote: detailed characteristics of these materials and treatments are presented on page. ) see «variant» for the colour. First choice alternative Special order alternative Contacts (D series) Ref. A Contact type ale solder center contact Female solder center contact For sockets For plugs Remarks Collets (D series) D type collets for D series D type D type collets for D series D type Type Code max. Cable ø min. otes Type Code max. Cable ø min. otes D D D D... >.. >. D D D. >.. >. ) ote: ) these collets cannot be used for connector models with nut for fitting a bend relief. All dimensions are in millimetres.

130 Variant (D series) Bend relief for D series models with collet eed to be ordered Colour of the bridge plug shells Colour D Ref. Z Collet Type Code D to eed to be ordered separately (see pages and ) GA.B.. A B G J R V blue white grey yellow brown black red green Accessories and Tooling (D series) Accessories and tooling for the D series are identical with the B series. Please refer to corresponding pages (page and ). Panel cut-outs (D series) Panel cut-out 0 ø ote: mounting nut torque:. m ( = 0.0 kg) When connectors are assembled with double panel washers or insulating washers the mounting nut torque is m. Cable assembly (D series) Cable stripping lengths (D series) T Connector Type ø contact A (mm) Cable stripping lengths (mm) S T S D 9 8 ote: the tolerances on these dimensions are: : ± 0. mm; S: ± 0. mm; T: ± 0. mm. 8

131 SPARE PARTS

132 Spare parts FGG-EGG Insulators for crimp contacts male female Type Insulator part number ale contact Female contact Type Insulator part number ale contact Female contact 00 0B 0K B K B K B K FGG.00.0.Y EGG.00.0.Y FGG.00.0.Y EGG.00.0.Y FGG.00.0.Y EGG.00.0.Y FGG.0B.0.Y EGG.0B.0.Y FGG.0B.0.Y EGG.0B.0.Y FGG.0B.0.Y EGG.0B.0.Y FGG.0B.0.Y EGG.0B.0.Y FGG.0B.0.Y FGG.0B.0.Y FGG.0B.09.Y FGG.B.0.Y EGG.B.0.Y FGG.B.0.Y EGG.B.0.Y FGG.B.0.Y EGG.B.0.Y FGG.B.0.Y EGG.B.0.Y FGG.B.0.Y EGG.B.0.Y FGG.B.0.Y EGG.B.0.Y FGG.B.08.Y EGG.B.08.Y FGG.B.0.Y FGG.B..Y FGG.B..Y FGG.B.0.Y EGG.B.0.Y FGG.B.0.Y EGG.B.0.Y FGG.B.0.Y EGG.B.0.Y FGG.B.0.Y EGG.B.0.Y FGG.B.0.Y EGG.B.0.Y FGG.B.0.Y EGG.B.0.Y FGG.B.08.Y EGG.B.08.Y FGG.B.0.Y EGG.B.0.Y FGG.B..Y EGG.B..Y FGG.B..Y EGG.B..Y FGG.B..Y EGG.B..Y FGG.B.8.Y EGG.B.8.Y FGG.B.9.Y EGG.B.9.Y FGG.B.0.Y EGG.B.0.Y FGG.B.0.Y EGG.B.0.Y FGG.B.0.Y EGG.B.0.Y FGG.B.0.Y EGG.B.0.Y FGG.B.0.Y EGG.B.0.Y FGG.B.0.Y EGG.B.0.Y B K B K B K FGG.B.08.Y FGG.B.09. FGG.B.0.Y FGG.B..Y FGG.B..Y FGG.B..Y FGG.B.8.Y FGG.B.0.Y FGG.B..Y FGG.B..Y FGG.B..Y FGG.B.0.Y FGG.B.0.Y FGG.B.0.Y FGG.B.0.Y FGG.B.0.Y FGG.B..Y FGG.B..Y FGG.B.0.Y FGG.B..Y FGG.B.0.Y FGG.B.0.Y FGG.B.8.Y FGG.B.0. FGG.B.0.Y FGG.B..Y FGG.B..Y FGG.B.0.Y FGG.B.0.Y FGG.B.0.Y FGG.B.8.Y FGG.B.0. FGG.B..Y FGG.B..Y EGG.B.08.Y EGG.B.09. EGG.B.0.Y EGG.B..Y EGG.B..Y EGG.B..Y EGG.B.8.Y EGG.B.0.Y EGG.B..Y EGG.B..Y EGG.B..Y EGG.B.0.Y EGG.B.0.Y EGG.B.0.Y EGG.B.0.Y EGG.B.0.Y EGG.B..Y EGG.B..Y EGG.B.0.Y EGG.B..Y EGG.B.0.Y EGG.B.0.Y EGG.B.8.Y EGG.B.0. EGG.B.0.Y EGG.B..Y EGG.B..Y EGG.B.0.Y EGG.B.0.Y EGG.B.0.Y EGG.B.8.Y EGG.B.0. EGG.B..Y EGG.B..Y ote: each insulator can be used both for crimp contacts of normal shape (fig. ) or with reduced solder cups (fig. ) as shown on page. 0

133 FGG-EGG Crimp contacts Fig. ø C Fig. ø C ø C ø C Types (mm) ø C (mm) Contact part number ale Female Types (mm) ø C (mm) Contact part number ale Female 00 0B 0K 0S B K S B K S / / /0/ /0..0 0/ /0/ // /0..0 0/ / // / FGG.00..ZZC EGG.00..ZZ FGG.00..ZZC EGG.00..ZZ FGG.00..ZZC EGG.00..ZZ FGG.0B.0.ZZC EGG.0B.0.ZZ FGG.0B..ZZC EGG.0B..ZZ FGG.0B..ZZC FGG.0B.0.ZZC EGG.0B.0.ZZ FGG.0B..ZZC EGG.0B..ZZ FGG.B..ZZC EGG.B..ZZ FGG.B.0.ZZC EGG.B.0.ZZ FGG.B..ZZC EGG.B..ZZ FGG.B..ZZC FGG.B..ZZC EGG.B..ZZ FGG.B.0.ZZC EGG.B.0.ZZ FGG.B..ZZC EGG.B..ZZ FGG.B.0.ZZC EGG.B.0.ZZ FGG.B..ZZC EGG.B..ZZ FGG.B..ZZC EGG.B..ZZ FGG.B.0.ZZC EGG.B.0.ZZ FGG.B..ZZC EGG.B..ZZ FGG.B..ZZC EGG.B..ZZ FGG.B..ZZC EGG.B..ZZ 0B 0K 0S B K S B K S 0/ / / /0..0 0/ /0/ /0..0 0/0..0 0/ / / / // / FGG.0B..ZZC EGG.0B..ZZ FGG.0B..ZZC EGG.0B..ZZ FGG.0B..ZZC EGG.0B..ZZ FGG.0B..ZZC EGG.0B..ZZ FGG.0B..ZZC EGG.0B..ZZ FGG.0B..ZZC EGG.0B..ZZ FGG.B..ZZC EGG.B..ZZ FGG.B..ZZC EGG.B..ZZ FGG.B..ZZC EGG.B..ZZ FGG.B..ZZC EGG.B..ZZ FGG.B..ZZC EGG.B..ZZ FGG.B..ZZC EGG.B..ZZ FGG.B..ZZC EGG.B..ZZ FGG.B..ZZC EGG.B..ZZ FGG.B..ZZC EGG.B..ZZ FGG.B..ZZC EGG.B..ZZ FGG.B..ZZC EGG.B..ZZ FGG.B..ZZC EGG.B..ZZ FGG.B..ZZC EGG.B..ZZ FGG.B..ZZC EGG.B..ZZ FGG.B..ZZC EGG.B..ZZ FGG.B..ZZC EGG.B..ZZ FGG.B..ZZC EGG.B..ZZ B K B K B K /0/ /0/ /09/0..0 / / // / / / / / / /0/8..0 0// FGG.B.80.ZZC EGG.B.80.ZZ FGG.B..ZZC EGG.B..ZZ FGG.B.0.ZZC EGG.B.0.ZZ FGG.B..ZZC EGG.B..ZZ FGG.B.0.ZZC EGG.B.0.ZZ FGG.B.0.ZZC EGG.B.0.ZZ FGG.B..ZZC EGG.B..ZZ FGG.B..ZZC EGG.B..ZZ FGG.B.80.ZZC EGG.B.80.ZZ FGG.B..ZZC EGG.B..ZZ FGG.B.0.ZZC EGG.B.0.ZZ FGG.B..ZZC EGG.B..ZZ FGG.B.0.ZZC EGG.B.0.ZZ FGG.B.0.ZZC EGG.B.0.ZZ FGG.B..ZZC EGG.B..ZZ FGG.B.8.ZZC EGG.B.8.ZZ FGG.B.80.ZZC EGG.B.80.ZZ FGG.B..ZZC EGG.B..ZZ FGG.B.0.ZZC EGG.B.0.ZZ FGG.B..ZZC EGG.B..ZZ FGG.B.0.ZZC EGG.B.0.ZZ B K B K B K 0/0/ /0/ /09/0..0 / / / // / / / / / / /0/8..0 0/0/ // FGG.B..ZZC EGG.B..ZZ FGG.B..ZZC EGG.B..ZZ FGG.B..ZZC EGG.B..ZZ FGG.B..ZZC EGG.B..ZZ FGG.B..ZZC EGG.B..ZZ FGG.B..ZZC EGG.B..ZZ FGG.B..ZZC EGG.B..ZZ FGG.B..ZZC EGG.B..ZZ FGG.B..ZZC EGG.B..ZZ FGG.B..ZZC EGG.B..ZZ FGG.B..ZZC EGG.B..ZZ FGG.B..ZZC EGG.B..ZZ FGG.B..ZZC EGG.B..ZZ FGG.B..ZZC EGG.B..ZZ FGG.B..ZZC EGG.B..ZZ FGG.B..ZZC EGG.B..ZZ FGG.B..ZZC EGG.B..ZZ FGG.B..ZZC EGG.B..ZZ FGG.B..ZZC EGG.B..ZZ

134 GBA ocking washers ø C Part number GBA.00.0.F GBA.0S.0.F A C S-0B GBA.S.0.F GBA.0E.0.F GBA.E.0.F GBA.S.0.F S-B D.0..0 XB 9... E-K.8.. S-B C-G 9... GBA.S.0.F GBA.S.0.F S-B S-B.0.. aterial: ickel-plated bronze ( µm) ote: to order this accessory separately, use the above part numbers. GBB Tapered washers ø C Part number GBB GBB.0S.0. GBB.S.0. GBB.S.0. GBB.S.0. GBB.S.0. GBB.S.0. A C S-0B 9.. S-B.. S-B C-G 8..0 S-B 8.. S-B 8..0 S-B 0.. aterial: ickel-plated brass ( µm) ote: sockets of series B and S are always supplied with a tapered washer. To order this accessory separately, use the above part numbers. The panel cut out diameters are larger when using tapered washer. GEA Hexagonal nuts A e Part number GEA GEA.0S.0. GEA.0S.. GEA.0E.0. A B e x S-0B. 9 x S-0B.8 0 x 0.. 0E-0K-0 S-B-XB 9. x.00. øb GEA.S.0. S-B-D.8 x.00. GEA.E.0. GEA.S.0. GEA.E.0. GEA.S.0. GEA.E.0. GEA.S.0. GEA.E.0. E-K- S-B 9. x.00.0 S-B 9. x.00. E-K-.0 0 x.00.0 S-B.0 8 x.00.0 E-K 0.0 x.00.0 S-B 0.0 x.00.0 E-K 0. 0 x.00.0 aterial: ickel-plated brass ( µm) atural anodized aluminium alloy Stainless steel ote: to order this part separately, use the above part numbers. The last letters of the part number refer to the nut material and treatment. If a nut in aluminium alloy or stainless steel is desired, replace the last letters of the part number by «PT» or «AZ» respectively.

135 GEG otched nut e e Part number GEG.00.0.C GEG.0S.0.C GEG.0E.0.C GEG.S.0.C GEG.E.0.C GEG.S..C GEG.S.0.C GEG.S..C GEG.E.0.C A B e 8. 0 x x x.0..0 x x.0.. x x x x.0. aterial: Chrome-plated brass (i µm + Cr 0. µm) ote: 00, 0B, 0S, B, S, B and S series fixed and free sockets for back panel mounting are always delivered with this notched nut. To order this accessory separately, use the above part numbers. GEC Conical nuts aterial: Chrome-plated brass (i µm + Cr 0. µm) ote: B, K, S, E, B, K, S, E, B, K, S, E, S and E series fixed and free sockets for back panel mounting are always delivered with a conical nut. To order this accessory separately, use the part numbers in the adjacent table. A e Part number GEC.00.0.C GEC.0S.0.C GEC.0E.0.C GEC.S.0.C GEC.S..C GEC.S..C GEC.S.0.C GEC.S..C GEC.E.0.C GEC.S.0.C GEC.E.0.C GEC.S.0.C GEC.K..C GEC.S.0.C A B e x x x x x x x x x x x x x x.0.0 GEB Round nuts e Part number A e e GEB GEB.0S.0. GEB.0E.0. GEB.S.0. GEB.E.0. GEB.S.0. GEB.B.0. GEB.S.0. GEB.S.0. GEB.S.0. GEB.E.0. GEB.S.. GEB.E x x x x x x.00.. x x x x x x x aterial: ickel-plated brass ( µm) ote: B, K, S, E, S and E series sockets are always supplied with model round nuts. To order this accessory separately, use the part numbers in the adjacent table.

136

137 ACCESSORIES TOOIG

138 Accessories BFG Plug caps B Part number BFG PCSG BFG.0B.00.PCSG A B S-0B BFG.B.00.PCSG BFG.B.00.PCSG BFG.B.00.PCSG S-B D S-B S-B Body material: Polyoxymethylene (PO) grey (or black) Cord material: Polyamide, grey (or black) Gasket material: Silicone rubber aximum operating temperature: 00 C Watertightness: IP according to IEC 09 ote: this cap is available only with an alignment key (G). Upon request this cap can be supplied in black and the last letter «G» of the part number should be replaced with. Fitting the cord Slide the plug into the loop of the cord. Place the loop into the groove in front of the collet nut and tighten the loop. BFA Plug caps B sliding loop Body material: ickel-plated brass (i µm) anyard material: Stainless steel Crimp ferrule material: ickel-plated brass + polyolefin O-ring material: Silicone rubber or FP aximum operating temperature: C Watertightness: IP8 according to IEC 09 for E series Part number BFA.0E.00.AS BFA.E.00.AS BFA.E.00.AS BFA.E.00.AS BFA.E.00.AS BFA.S.00.AS BFA.E.00.AS BFA.S.00.AS BFA.S.00.AS A B 0E.0. 8 E.0. 8 E E E S E S S ote: the last letter «S» of the part number stands for the material of the O- ring (silicone rubber). O-ring s made from FP are also available; if required, replace the letter «S» by «V». BFG Plug caps with key (G) B sliding loop Body material: ickel-plated brass (i µm) anyard material: Stainless steel Crimp ferrule material: ickel-plated brass + polyolefin O-ring material: Silicone rubber or FP aximum operating temperature: C Watertightness: IP8 according to IEC 09 for E and K series Part number BFG.0K.00.AS BFG.K.00.AS BFG.K.00.AS BFG.K.00.AS BFG.B.00.AS BFG.K.00.AS BFG.B.00.AS BFG.K.00.AS BFG.E.00.AS A B 0K K K K B K B K E ote: this cap is available only with an alignment key (G). The last letter «S» of the part number stands for the material of the O-ring (silicone rubber). O-ring s made from FP are also available; if required, replace the letter «S» by «V».

139 BHG Plug caps, nut fixing or flange B ø. Part number BHG.0K.00.AS BHG.K.00.AS BHG.K.00.AS BHG.K.00.AS BHG.B.00.AS BHG.K.00.AS BHG.B.00.AS BHG.K.00.AS BHG.E.00.AS A B 0K K K K B K B K E Body material: ickel-plated brass (i μm) anyard material: Stainless steel Crimp ferrule material: ickel-plated brass + polyolefin O-ring material: Silicone rubber or FP aximum operating temperature: C Watertightness: IP8 according to IEC 09 for E and K series ote: this cap is available only with an alignment key (G). The last letter «S» of the part number stands for the material of the O-ring (silicone rubber). O-ring s made from FP are also available; if required, replace the letter «S» by «V». BFG Plug cap Part number BFG.K.00.EA A K aterial: black ACRY anyard material: Stainless steel Crimp ferrule material: Stainless steel AISI 0 + polyolefin ote: These caps are suitable for use with any alignment key configuration. BHA Plug cap Part number BHA.K.00.EA A K 0 ø. aterial: black ACRY anyard material: Stainless steel Crimp ferrule material: Stainless steel AISI 0 + polyolefin ote: These caps are suitable for use with any alignment key configuration. BRA Blanking caps for fixed sockets and free straight sockets ø. B Part number BRA PCSG BRA.0B.00.PCSG BRA.B.00.PCSG A B S-0B S-B D BRA.B.00.PCSG BRA.B.00.PCSG S-B C-G S-B Body material: Polyoxymethylene (PO) grey (or black) Cord material: Polyamide, grey (or black) Gasket material: Silicone rubber aximum operating temperature: 00 C Watertightness: IP according to IEC 09 ote: these caps are suitable for use with any alignment key configuration. On request this cap can be supplied in black. If so, replace the last letter «G» of the part number by.

140 Body material: ickel-plated brass (i μm) anyard material: Stainless steel Crimp ferrule material: ickel-plated brass + polyolefin O-ring material: Silicone rubber or FP aximum operating temperature: C Watertightness: IP according to IEC 09 for S series B ø. BRE Blanking caps for fixed sockets Part number BRE AS BRE.0S.00.AS BRE.S.00.AS BRE.S.00.AS BRE.S.00.AS BRE.S.00.AS BRE.S.00.AS BRE.S.00.AS BRE.E.00.AS A B S-0B S-B D S-B S-B S-B S-B S E ote: these caps are suitable for use with any alignment key configuration. The last letter «S» of the part number stands for the O-ring material (silicone rubber). O-ring s made from FP are also available; if required, replace the letter «S» by «V». BRE Blanking caps for fixed sockets B ø. Part number BRE.0K.00.AS BRE.K.00.AS BRE.K.00.AS BRE.K.00.AS BRE.K.00.AS BRE.K.00.AS A B 0K-0E K-E K-E K-E K-E K-E Body material: ickel-plated brass (i μm) anyard material: Stainless steel Crimp ferrule material: ickel-plated brass + polyolefin O-ring material: Silicone rubber or FP aximum operating temperature: C Watertightness: IP8 according to IEC 09 ote: these caps are suitable for use with any alignment key configuration. The last letter «S» of the part number stands for the O-ring material (silicone rubber). O-ring s made from FP are also available; if required, replace the letter «S» by «V». BRA Blanking caps for fixed sockets Part number BRA.K.00.EA BRA.K.00.EA A K. 0 K.0 0 ø. aterial: black ACRY anyard material: Stainless steel Crimp ferrule material: Stainless steel AISI 0 + polyolefin ote: These caps are suitable for use with any alignment key configuration. BRF Blanking caps for free sockets Part number BRF.K.00.EA A K. 8 aterial: black ACRY anyard material: Stainless steel Crimp ferrule material: Stainless steel AISI 0 + polyolefin ote: These caps are suitable for use with any alignment key configuration.

141 BRD Blanking caps for free sockets B Part number BRD PCSG BRD.0B.00.PCSG A B S-0B BRD.B.00.PCSG BRD.B.00.PCSG BRD.B.00.PCSG S-B D S-B S-B Body material: Polyoxymethylene (PO) grey (or black) Cord material: Polyamide, grey (or black) Gasket material: Silicone rubber aximum operating temperature: 00 C Watertightness: IP according to IEC 09 ote: on request this cap is available in black. If required, replace the last letter «G» of the part number by. Fitting the cord Slide the socket into the loop of the cord. Place the loop into the groove in front of the collet nut. Tighten the loop. BRF Blanking caps for free sockets B sliding loop Part number BRF AS BRF.0S.00.AS BRF.S.00.AS BRF.S.00.AS BRF.S.00.AS BRF.S.00.AS BRF.S.00.AS BRF.S.00.AS A B S-0B S-B D S-B S-B S-B S-B S Body material: ickel-plated brass (i µm) anyard material: Stainless steel Crimp ferrule material: ickel-plated brass + polyolefin O-ring material: Silicone rubber or FP aximum operating temperature: C Watertightness: IP according to IEC 09 for S series ote: these caps are suitable for use with any alignment key configuration. The last letter «S» of the part number stands for the O-ring material (silicone rubber). O-ring s made from FP are also available; if required, replace the letter «S» by «V». BRF Blanking caps for free sockets B Part number BRF.0K.00.AS BRF.K.00.AS BRF.K.00.AS BRF.K.00.AS BRF.K.00.AS BRF.K.00.AS A B 0K-0E K-E K-E K-E K-E K-E Body material: ickel-plated brass (i µm) anyard material: Stainless steel Crimp ferrule material: ickel-plated brass + polyolefin sliding loop ote: these caps are suitable for use with any alignment key configuration. The last letter «S» of the part number stands for the O-ring material (silicone rubber). O-ring s made from FP are also available; if required, replace the letter «S» by «V». O-ring material: Silicone rubber or FP aximum operating temperature: C Watertightness: IP8 according to IEC 09 9

142 BRR Spring loaded dust caps for ERA, ER and EG sockets or PSA and PK fixed sockets Part number A B C E BRR.0S.00.PZVG 0S-0B BRR.S.00.PZVG BRR.S.00.PZVG S-B D S-B C-G BRR.S.00.PZVG S-B B ø C ote: On request, this cap is available in black, blue or white. If so replace the last letter «G» of the part number by, «A» or «B». E maxi Body material: PSU Gasket material: FK Spring material: Stainless steel Axes material: ickel-plated brass aximum operating temperature: 00 C Watertightness: IP according to IEC 09 BRR Spring loaded dust cap for ED and EB fixed sockets Part number A B C BRR.K.00.PZSG K ote: Use Allen key (0.9 mm flat) to secure cap on connector. B ø C Cap material: Polyoxymethylene (PO) grey Body material: ickel-plated brass Gasket material: Silicone rubber Spring material: Stainless steel Axes material: ickel-plated brass aximum operating temperature: 00 C Watertightness: IP according to IEC 09 0

143 G Bend relief (TPU) A bend relief made from thermoplastic polyurethane elastomer can be fitted over EO plugs and sockets that are supplied with nut for fitting such bend relief. They are available in nine different colours match with the GRA insulating washers (see page ). Use the part numbers shown below to order this accessory separately. ain characteristics aterial: TPU (Thermoplastic Polyurethane) Temperature range in dry atmosphere: -0 C +80 C Part number GA.00.0.DG GA DG GB.00.0.DG GB DG GB.00.0.DG GD.00.0.DG GD DG GD.00.0.DG GA.0B.0.DG GA.0B.00.DG GA.0B.0.DG GA.0B.00.DG GA.0B.0.DG GA.B.0.DG GA.B.00.DG GA.B.0.DG GA.B.00.DG GA.B.0.DG GA.B.0.DG GA.B.0.DG Bend relief Cable ø A max. min B 0S 0E-0K-0 B-XB D S E-K- Part number GA.B.00.DG GA.B.0.DG GA.B.00.DG GA.B.00.DG GA.B.00.DG GA.B.080.DG GA.B.00.DG GA.B.00.DG GA.B.00.DG GA.B.080.DG GA.B.090.DG GA.B.080.DG GA.B.00.DG GA.B.0.DG GA.B.0.DG GA.B.0.DG Bend relief Cable ø A max. min B S E-K- C-G S B E-K S S B E-K ote: The «GD» are thin bend reliefs (for very flexible cables). The last letter «G» of the part number indicates the grey colour of the bend relief. For ordering a bend relief with another colour, see table on page and replace the letter «G» by the letter of the required colour. See also detailed information for each series: B series on page : K series on page ; S series on page 0; E series on page 0.

144 GA Bend relief (Silicone) A bend relief has been designed for connectors used in applications at high temperature or requiring vapour sterilization. These bend reliefs are different from previous ones as for their material, a silicone elastomer which is noted for its retention of flexibility over a wide temperature range. They are available in nine colours. Use the part numbers shown below to order this accessory separately. ain characteristics aterial: Silicone elastomer VQ Temperature range in dry atmosphere: -0 C +00 C Temperature range in water steam: +0 C Part number GA.0B.0.RG GA.0B.00.RG GA.0B.0.RG GA.0B.00.RG GA.0B.0.RG GA.B.0.RG GA.B.00.RG GA.B.0.RG GA.B.00.RG GA.B.0.RG GA.B.0.RG GA.B.0.RG GA.B.0.RG Bend relief Cable ø A max. min B 0S 0E-0K-0 B-D S E-K- Part number GA.B.00.RG GA.B.0.RG GA.B.0.RG GA.B.0.RG GA.B.0.RG GA.B.0.RG GA.B.080.RG Bend relief Cable ø A max. min B S E-K- C-G ote: the last letter «G» of the part number indicates the grey colour of the bend relief. For ordering a bend relief with another colour, see table on page and replace the letter «G» by the letter of the required colour. See also detailed information for each series: B series on page : K series on page ; S series on page 0; E series on page 0. ote: the selection of pigments, which should remain stable at high temperature, is limited by the new regulations. For this reason, some colours will be a shade different from those used for Desmopan bend reliefs. The selected solutions represent the best possible compromise. Ref. A B G J Colour blue white grey yellow brown Ref. R S V Colour black red orange green

145 G Overall bend relief for plugs and sockets Overall bend reliefs, type GF for plugs and GP for sockets offer optimum protection against mechanical damage and give a protection index of IP according to IEC 09 (mated position). These bend reliefs slide easily over the connector shell and are positioned by slightly pressing the bend relief backnut. The special design of the bend relief for plug provides for easy use of the push-pull self-latching system. GF Bend relief for straight plug Part number GF.0B.0.00E GF.B.0.0E GF.B.08.09E Bend relief Cable ø A max. min. 0S-0B S-B S-B aterial: Elastomer rubber black colour Operating temperature: -0 C to +0 C GP Bend relief for free socket Part number GP.0B.0.09E GP.B.0.09E GP.B.08.0E Bend relief Cable ø A max. min. 0S-0B S-B S-B aterial: Elastomer rubber black colour Operating temperature: -0 C to +0 C The overall bend relief shall be installed over plug or free socket fitted with a nut for bend relief. The typical applications are shown below. The overall bend relief can be cut at different length depending on cable diameter. Plug-free socket PCA FFA S series PHG FGG B series Plug-fixed socket Optimum protection is offered only when using front panel mounting fixed sockets ERA FFA S series EGG FGG B series

146 GF Bend relief with cap for plug Part number For models Cut admissible ø (mm) min. max. ø ø ø GF.K.080.EAZ E K FFA FGG A B 0.0. C..9 D.0.9 E.0. A B CDE 0 aterial: Black EPD GP Bend relief with cap for free socket Part number For models Cut admissible ø (mm) min. max. ø ø ø GP.K.080.EAZ E K PCA PHG A B 0.0. C..9 D.0.9 E.0. A B CDE 0 aterial: Black EPD GRA Insulating washers Sockets or plugs mounted on panels can be fitted with insulating washers. The nine colours available combined with those for the bend reliefs makes colour coding possible. Part number GRA.00.9.GG GRA.0S.9.GG GRA.S.9.GG GRA.S.9.GG GRA.S.9.GG GRA.S.9.GG A B E S T S-0B S-B S-B S-B S-B S ote: insulating washers for series B are available on request. Caution: these insulating washers can be used with fixed and free sockets with across flat dimension S equivalent to the S dimension of the washer. Ref. Colour Ref. Colour E maxi T A B G J blue white grey yellow brown R S V black red orange green aterial: Polyamide aximum operating temperature: 90 C ote: the last letter «G» of the part number indicates the colour grey for the insulating washer. To obtain an insulating washer of another colour, refer to the table above and change the letter «G» of the part number to the corresponding letter of the colour required. For the panel cut-out, please consult chapter «Panel cut-out» on page.

147 GRC Double panel washers Double panel washers have been designed to make the drilling of panel holes easier for mounting fixed and free sockets. The combination of the nine different colours of the double panel washers and of the bend reliefs makes colour coding possible. Part number GRC.0S.0.HG GRC.B.0.HG B E H R S 0S-0B S-B R S Caution: these double panel washers can be used with fixed or free sockets with across flat dimension S equivalent to the S dimension of the washer. Ref. Colour Ref. Colour H A B G J blue white grey yellow brown R S V black red orange green E maxi aterial: Polyamide aximum operating temperature: 90 C ote: the last letter «G» of the washer s part number indicates the colour grey. For other colours, refer to the above table and replace letter «G» by the one corresponding to the colour required. For the panel cut-out, please consult chapter «Panel cut-out» on page. GCA Earthing washer Part number GCA.00..T GCA.0S..T GCA.0E..T GCA.S..T GCA.E..T GCA.S..T GCA.E..T GCA.S..T GCA.S..T GCA.E..T GCA.S..T A B S-0B E-0K S-B E-K S-B E-K S-B S-B E-K S-B aterial: CuSnZn plated brass ( µm) GSC ead-through with cable collet Part number A B e E S S S S ~ GSC CD GSC.S.90.D GSC.S.90.D. 8. x x x e E maxi S S ote: = collet cable diameter of the B series. For cable diameter refer to page. The cable collet system stands for both screened and unscreened cables. It can be delivered with a nut for fitting a bend relief it you add a «Z» at the end of the part number.

148 Tooling DCG Spanners for hexagonal nuts Part number B Part number of the nut DCG.9.9.0T DCG.9..T DCG.9.0.T DCG.9..T DCG.9.8.T GEA GEA.0S.0. GEA.S.0. GEA.S.0. GEA.S.0. aterial: blackened steel DCA Spanners for hexagonal nuts with locator for flats on socket thread max Part number DCA.9.9.0T DCA.9..T DCA.9.0.T DCA.9..T DCA.9.8.T B Part number of the nut GEA GEA.0S.0. GEA.S.0. GEA.S.0. GEA.S.0. aterial: blackened steel DCB Spanners for round nuts Part number B Part number of the nut DCB.9.9.0T DCB.9..T DCB.9..T DCB.9.0.8T DCB.9..T GEB GEB.0S.0. GEB.S.0. GEB.S.0. GEB.S.0. aterial: blackened steel DCH Spanners for conical nut Part number DCH.9.0.P DCH.9..P DCH.9..P DCH.9.0.P A B Part number of the nut GEC.00.0.C GEC.0S.0.C GEC.S.0.C GEC.S.0.C aterial: dark grey polyurethane

149 S DCP Flat spanners for collet nut Part number S DCP TC DCP.99.0.TC DCP TC DCP.99.0.TC DCP TC aterial: chrome-plated steel S DCH Spanners for notched nuts Part number DCH.9.0.PA DCH.9..PA DCH.9.8.PA DCH.9..PA DCH.9.0.PA DCH.9..PA DCH.9.0.PA DCH.9..PA DCH.9..PA A B Part number of the nut GEG.00.0.C GEG.0S.0.C GEG.0E.0.C GEG.S.0.C GEG.E.0.C GEG.S..C GEG.S.0.C GEG.S..C GEG.E.0.C aterial: blue polyurethane DCP Set of flat spanners for collet nuts S S Part number S S DCP.9.00.T DCP.9.0.T DCP.9.0.T 0B B B-K B-K.0.. B B aterial: blackened steel DC Spanners for assembling plugs with latches Part number DC.9.0.0TK DC.9..0TK DC.9.9.0TK B S.0 S 9.0 aterial: blackened steel

150 DC Spanners for assembling plugs with latches Part number DC TK DC.9..0TK DC.9.9.0TK DC.9..TK DC.9.0.TK B S S 9 S-C 0 S 0 aterial: blackened steel DC Assembly tool for FVB.00.0.A plugs Part number DC.9..TK Dim. (mm) A 00 DPF Pliers for assembling plugs (series K, E and ) Part number DPF.9.00.TA DPF.9.0.TA A B 0E-0K-0 0 E-K- E-K- E-K 8 0 Example for use The plug end must be held in the pliers whilst the nut is tightened with the flat spanner. Spanner Pliers DPF DTA Taps Part number Thread DTA Z DTA Z 00 x 0. 0S-0B 9 x 0. 8

151 Crimping tools for electrical contacts Fig. A anual crimping tools Fig. B Supplier EO DAIES ASTRO Part number contact ø contact ø.-.0 contact ø (Fig. A) (Fig. B) (Fig. B) DPC.9.0.V ) DPC.9.0.A ) DPC.9.0.V H80 ) AF8 ) 00BT ) 08 ) ) According to specification I-C-0/-0. ) According to specification I-C-0/-0. Pneumatic crimping tools Supplier EO BAAR BUCHAA Part number DPC.9.0.C 80 0 According to specification I-C-0/-0. For EO contacts ø mm DCE Positioners for crimp contacts ø and. mm Type Connector + Contact ø C Fig. Conductor AWG Positioners part number For male For female contact contact male female DCE VC DCE V These positioners are suitable for use with both manual and pneumatic crimping tools according to the I-C-0/-0 standard. Fig. ø C 0B 0K 0S 0 ) 0 0 ) DCE BVC DCE AVC DCE.9.00.BVC DCE BV DCE AV DCE.9.00.BV 0/ DCE.9.00.BVC DCE.9.00.BV Fig. ø C ø C B K S 0 ) 0 0 ) 0 0/ DCE.9..BVC DCE.9.09.BVC DCE.9.0.BVC DCE.9..BV DCE.9.09.BV DCE.9.0.BV ote: a wide variation of strand number and diameter combinations are quoted as being AWG, some of which do not have a large enough cross section to guarantee a crimp as per either I-C-0/-0 or /-0. Our technical department is at your disposal to study and propose a solution to all your applications. ø C B K S 0/ /0 0 ) / / / DCE.9.0.BVC DCE.9..BVC DCE.9..CVC DCE.9.09.BVC DCE.9.09.AVC DCE.9.0.BVC DCE.9.0.BV DCE.9..BV DCE.9..CV DCE.9.09.BV DCE.9.09.AV DCE.9.0.BV ote: see table on page for connector selection and the table on page for contact selection. ote: ) only these types are available in S series. 9

152 DCE Positioners for crimp contacts and. mm diameter Connector + Contact Type Conductor AWG ø C Fig. Positioners part number For male For female contact contact male female These positioners are suitable for use with both manual and pneumatic crimping tools according to the I-C-0/-0 standard. B K 08/09 0 / /8 0/ / DCE.9..BVC DCE.9..BV DCE.9.09.BVC DCE.9.09.BV DCE.9.0.BVC DCE.9.0.BV B K / / / DCE.9..BVC DCE.9..BV DCE.9.09.BVC DCE.9.09.BV DCE.9.0.BVC DCE.9.0.BV B K 0/0 8 0/ DCE.9..BVC DCE.9..BV DCE.9..BVG DCE.9..BVU DCE.9.09.BVC DCE.9.09.BV DCE Turret for crimp contacts and.0 mm diameter Connector + Contact Type Conductor AWG ø C Fig. Positioners Part number ote: these turrets can be used with manual crimping tool according to I-C-0/-0 standard. B K B K B K B K /0 09 0/ / / DCE.9.0.BVC DCE.9..BVC DCE.9.0.BVC DCE.9.0.BVC DCE.9..BVC DCE.9.0.BVC DCE.9.0.BVC DCE.9..BVC DCE.9.0.BVC DCE.9.0.BVC DCE.9.0.BVC DCE.9..BVC DCK Retention testing tools for crimp contacts and. mm diameter F Contact Test force () Testing tool part number For male For female contact contact DCK RC DCK R DCK.9.0.0RC DCK.9.0.0R DCK.9.09.RC DCK.9.09.R DCK.9..RC DCK.9..R 0