FLT5A FLT5A. abc. abc. Thermometer User Guide. Thermometer User Guide. Internet:

Transcription

1 abc instruments international FLT5A Thermometer Land Instruments International Dronfield, S18 1DJ England Telephone: (1246) Facsimile: (1246) Internet: Land Instruments International 1 Friends Lane Newtown, PA , U.S.A. Telephone: (215) 54-8 Facsimile: (215) irsales@landinstruments.net Internet: Land Instruments International, 23 Publication Nº AD Issue C 4/3 abc instruments international FLT5A Thermometer Land Instruments International Dronfield, S18 1DJ England Telephone: (1246) Facsimile: (1246) infrared.sales@landinst.com Internet: Land Instruments International 1 Friends Lane Newtown, PA , U.S.A. Telephone: (215) 54-8 Facsimile: (215) irsales@landinstruments.net Internet: Land Instruments International, 23 Publication Nº AD Issue C 4/3

2 FLT5A Thermometer FLT5A Thermometer ABC abcdefg ABC abcdefg The Quality Management System of Land Instruments International Ltd. is approved to BS EN ISO91:2 for the design and manufacture, stockholding, in-house repair and site servicing of non contact temperature measuring instrumentation. Associated software designed and developed in accordance with TickIT. The Quality Management System of Land Instruments International Ltd. is approved to BS EN ISO91:2 for the design and manufacture, stockholding, in-house repair and site servicing of non contact temperature measuring instrumentation. Associated software designed and developed in accordance with TickIT. Calibration certificates are available from our UKAS accredited Calibration Laboratory No. 34. The Land calibration laboratory complies with the requirements of the international standard BS EN ISO/IEC Calibration certificates are available from our UKAS accredited Calibration Laboratory No. 34. The Land calibration laboratory complies with the requirements of the international standard BS EN ISO/IEC This product complies with current European directives relating to electromagnetic compatibility and safety. (EMC directive 89/336/EEC; Low voltage directive 73/23/EEC) This product complies with current European directives relating to electromagnetic compatibility and safety. (EMC directive 89/336/EEC; Low voltage directive 73/23/EEC) All packaging material used for this product is 1% recyclable. All packaging material used for this product is 1% recyclable.

3 FLT5A Thermometer FLT5A Thermometer SAFETY INFORMATION SAFETY INFORMATION Symbol Publication Description Symbol Publication Description IEC 417, No. 531 Direct current IEC 417, No. 531 Direct current IEC 417, No. 532 Alternating current IEC 417, No. 532 Alternating current IEC 417, No. 533 Both direct and alternating current IEC 417, No. 533 Both direct and alternating current 3 IEC 617-2, No Three-phase alternating current 3 IEC 617-2, No Three-phase alternating current IEC 417, No. 517 Earth (ground) terminal IEC 417, No. 517 Earth (ground) terminal IEC 417, No. 519 Protective conductor terminal IEC 417, No. 519 Protective conductor terminal IEC 417, No. 52 Frame or chassis terminal IEC 417, No. 52 Frame or chassis terminal IEC 417, No. 521 Equipotentiality IEC 417, No. 521 Equipotentiality IEC 417, No. 57 On (Supply) IEC 417, No. 57 On (Supply) IEC 417, No. 58 Off (Supply) IEC 417, No. 58 Off (Supply) IEC 417, No Equipment protected throughout by double insulation or reinforced insulation (equivalent to Class II of IEC 536) IEC 417, No Equipment protected throughout by double insulation or reinforced Safety information Safety information

4 FLT5A Thermometer FLT5A Thermometer SAFETY INFORMATION (CONTINUED...) SAFETY INFORMATION (CONTINUED...) Symbol Publication Description Symbol Publication Description ISO 3864, No. B.3.6 Caution, risk of electric shock ISO 3864, No. B.3.6 Caution, risk of electric shock ISO 3864, No. B.3.1 Caution ISO 3864, No. B.3.1 Caution BS EN 115 Observe precautions for handling electrostatic discharge sensitive devices BS EN 115 Observe precautions for handling electrostatic discharge sensitive devices BS EN Warning, laser radiation BS EN Warning, laser radiation Refer to the Operating Instructions. Refer to the Operating Instructions. Safety information Safety information

5 FLT5A Thermometer FLT5A Thermometer Contents Contents 1. INTRODUCTION 1 1. INTRODUCTION About this guide About the FLT5A thermometer Unpacking the thermometer Specifications About this guide About the FLT5A thermometer Unpacking the thermometer Specifications 3 2. INSTALLING THE THERMOMETER 5 2. INSTALLING THE THERMOMETER Choosing a location for the thermometer Power supplies and temperature displays Choosing a location for the thermometer Power supplies and temperature displays 5 3. USING THE THERMOMETER 7 3. USING THE THERMOMETER Location of controls Adjusting the 'Emissivity' value Adjusting the averager 'Response Speed' Note your settings Electrical connections Location of controls Adjusting the 'Emissivity' value Adjusting the averager 'Response Speed' Note your settings Electrical connections MOUNTINGS AND ACCESSORIES MOUNTINGS AND ACCESSORIES MAINTENANCE MAINTENANCE 13 Contents Contents

6 FLT5A Thermometer FLT5A Thermometer

7 FLT5A Thermometer FLT5A Thermometer 1. INTRODUCTION 1. INTRODUCTION 1.1 About this guide 1.1 About this guide This guide gives the information necessary for you to operate a LAND FLT5A Thermometer. Basic information regarding installation is contained within the Installation Guide. More detailed information regarding servicing, repair and calibration of the thermometer is contained in the Service Manual. This guide gives the information necessary for you to operate a LAND FLT5A Thermometer. Basic information regarding installation is contained within the Installation Guide. More detailed information regarding servicing, repair and calibration of the thermometer is contained in the Service Manual. 1.2 About the FLT5A thermometer 1.2 About the FLT5A thermometer The LAND FLT5A thermometer is a highly accurate, non contact thermometer designed for independent or STAND ALONE use. The thermometer features include: Stand Alone operation. Adjustable response speed. 4 to 2mA loop powered, output linear over the temperature span of the thermometer. Built in Emissivity controls. The LAND FLT5A thermometer is a highly accurate, non contact thermometer designed for independent or STAND ALONE use. The thermometer features include: Stand Alone operation. Adjustable response speed. 4 to 2mA loop powered, output linear over the temperature span of the thermometer. Built in Emissivity controls. Fig. 1 Land FLT5A Thermometer S Fig. 1 Land FLT5A Thermometer S Page 1 Page 1

8 FLT5A Thermometer FLT5A Thermometer The LAND FLT5A thermometer is designed to provide precise, non contact temperature measurement in float line applications. The LAND FLT5A thermometer is designed to provide precise, non contact temperature measurement in float line applications. A comprehensive range of mountings and accessories is available, see Section 4.. A comprehensive range of mountings and accessories is available, see Section 4.. Air Purge Thermometer Jacket Back Cap Air Purge Thermometer Jacket Back Cap Fig. 2 Thermometer with Air Purge, Protection Jacket and Back Cap S Fig. 2 Thermometer with Air Purge, Protection Jacket and Back Cap S Unpacking the thermometer 1.3 Unpacking the thermometer Along with this, the thermometer packaging will also contain the following items: Envelope containing this. Binder, for your thermometer and power supply user documentation. FLT5A thermometer (fitted with protection cap on the lens). It is recommended that the lens protection cap is kept attached until the thermometer is installed. Along with this, the thermometer packaging will also contain the following items: Envelope containing this. Binder, for your thermometer and power supply user documentation. FLT5A thermometer (fitted with protection cap on the lens). It is recommended that the lens protection cap is kept attached until the thermometer is installed. Page 2 Page 2

9 FLT5A Thermometer FLT5A Thermometer 1.4 Specifications 1.4 Specifications Range : 25 to 11 C 5 to 2 F Spectral response : 4.8 to 5.2µm Range : 25 to 11 C 5 to 2 F Spectral response : 4.8 to 5.2µm Field of view : 5:1 at 1m focus (fixed) 5:1 at 39.4in focus (fixed) Output : 4 to 2mA current loop Response time ( to 95%) : 1 to 1 seconds adjustable Field of view : 5:1 at 1m focus (fixed) 5:1 at 39.4in focus (fixed) Output : 4 to 2mA current loop Response time ( to 95%) : 1 to 1 seconds adjustable Emissivity adjustment :.3 to 1.1 in.1 steps Emissivity adjustment :.3 to 1.1 in.1 steps Resolution :.2 C (slow response setting).4 F (slow response setting) Resolution :.2 C (slow response setting).4 F (slow response setting) Stability :.23% of span per 1 C change in ambient temperature.23% of span per 2 F change in ambient temperature Accuracy (absolute) :.5%K + 1 C.5%K + 2 F Stability :.23% of span per 1 C change in ambient temperature.23% of span per 2 F change in ambient temperature Accuracy (absolute) :.5%K + 1 C.5%K + 2 F Ambient limits : to 6 C specified; -1 to 8 C operating 32 to 14 F specified; 14 to 176 F operating EMC : EN (immunity) EN (emission) IEC 11 (safety) Sealing : IP65 Vibration : 3g (1 to 3Hz) Ambient limits : to 6 C specified; -1 to 8 C operating 32 to 14 F specified; 14 to 176 F operating EMC : EN (immunity) EN (emission) IEC 11 (safety) Sealing : IP65 Vibration : 3g (1 to 3Hz) Power supply : 12 to 45V d.c. Power supply : 12 to 45V d.c. Page 3 Page 3

10 Page 4 Page 4 Fig. 4 Thermometer installation dimensions AD99184 Fig. 4 Thermometer installation dimensions AD99184 Mounting Pad: 2 holes, ¼in BSW, 7mm/.3in deep on 25mm/.98in centres Mounting Pad: 2 holes, ¼in BSW, 7mm/.3in deep on 25mm/.98in centres 114mm/4.49in 114mm/4.49in 8.5mm/3.17in 158mm/6.22in 8.5mm/3.17in 158mm/6.22in Fig. 3 Target Size Table for FLT5A AD9921 Fig. 3 Target Size Table for FLT5A AD Target Distance (in) Target Distance (in) Target Diameter (in) Target Diameter (in) Target Diameter (mm) Target Diameter (mm) Target Distance (mm) Target Distance (mm) FLT5A Thermometer FLT5A Thermometer

11 FLT5A Thermometer FLT5A Thermometer 2. INSTALLING THE THERMOMETER 2. INSTALLING THE THERMOMETER This section contains similar information to the thermometer Installation Guide. If the thermometer is to be used in conjunction with a protection jacket and air purge, refer to the installation guides provided with those accessories. If the thermometer is to be installed in a location where the ambient temperature is within the ranges specified for the thermometer, and no air purging is required to keep the lens clean, the thermometer can be mounted using the two tapped holes on the mounting pad. Either hole can be used for direct tripod mounting. This section contains similar information to the thermometer Installation Guide. If the thermometer is to be used in conjunction with a protection jacket and air purge, refer to the installation guides provided with those accessories. If the thermometer is to be installed in a location where the ambient temperature is within the ranges specified for the thermometer, and no air purging is required to keep the lens clean, the thermometer can be mounted using the two tapped holes on the mounting pad. Either hole can be used for direct tripod mounting. 2.1 Choosing a location for the thermometer 2.1 Choosing a location for the thermometer The overall dimensions of the thermometer installation are given in Fig. 4. 1) Choose a location where the thermometer will not be exposed to excessive heat, fumes and spray. The overall dimensions of the thermometer installation are given in Fig. 4. 1) Choose a location where the thermometer will not be exposed to excessive heat, fumes and spray. Refer to the 'Specification' (Page 3) for ambient temperature limits etc. 2) Refer to the Target Size Table (Fig. 3). Ensure that the target completely fills the field of view at the chosen target distance. Check that nothing obstructs the sighting path between the thermometer and the target. Refer to the 'Specification' (Page 3) for ambient temperature limits etc. 2) Refer to the Target Size Table (Fig. 3). Ensure that the target completely fills the field of view at the chosen target distance. Check that nothing obstructs the sighting path between the thermometer and the target. 3) Make sure that the sighting path is free from smoke, oil or water spray. 4) Ensure that the chosen location for the thermometer allows easy access for servicing. 3) Make sure that the sighting path is free from smoke, oil or water spray. 4) Ensure that the chosen location for the thermometer allows easy access for servicing. 2.2 Power supplies and temperature displays 2.2 Power supplies and temperature displays The FLT5A Thermometer requires a power supply of 12 to 48V d.c. The FLT5A Thermometer requires a power supply of 12 to 48V d.c. Page 5 Page 5

12 Page 6 Page 6 Fig. 6 'Emissivity' and 'Response Speed' controls AD9922 Fig. 6 'Emissivity' and 'Response Speed' controls AD9922 Response Speed Fully anticlockwise = 1sec Fully clockwise = 1sec Example settings Response Speed Fully anticlockwise = 1sec Fully clockwise = 1sec Example settings P1 SW P1 SW SW SW Emissivity Example =.85 Emissivity SW1 SW2 Emissivity Example =.85 Emissivity SW1 SW2 Fig. 5 Location of the screw-on cap AD99186 Fig. 5 Location of the screw-on cap AD99186 Fast Fast Screw-on cap Screw-on cap FLT5A Thermometer FLT5A Thermometer

13 FLT5A Thermometer FLT5A Thermometer 3. USING THE THERMOMETER 3. USING THE THERMOMETER It is recommended that the 'Emissivity' and 'Response Speed' controls are set to match the requirements of the particular measurement location before installation. This is particularly relevant if the thermometer is to be used in a location which is difficult to access and/or used in conjunction with a jacket and back cap. It is recommended that the 'Emissivity' and 'Response Speed' controls are set to match the requirements of the particular measurement location before installation. This is particularly relevant if the thermometer is to be used in a location which is difficult to access and/or used in conjunction with a jacket and back cap. 3.1 Location of controls 3.1 Location of controls The 'Emissivity' and 'Response Speed' control switches are located on the rear face of the thermometer. The controls are protected by a screw-on cap (See Fig. 5). The 'Emissivity' and 'Response Speed' control switches are located on the rear face of the thermometer. The controls are protected by a screw-on cap (See Fig. 5). NOTE NOTE To keep the thermometer electronics sealed against ingress of dust and moisture, always replace the screw-on cap after adjusting the settings. To keep the thermometer electronics sealed against ingress of dust and moisture, always replace the screw-on cap after adjusting the settings. 3.2 Adjusting the 'Emissivity' value 3.2 Adjusting the 'Emissivity' value For accurate temperature measurement, the 'Emissivity' setting must be set to correspond with the target being measured. The emissivity can be set in the range.1 to 1.9 in steps of.1. The FLT5A is supplied with the emissivity factory-set to 1.. For accurate temperature measurement, the 'Emissivity' setting must be set to correspond with the target being measured. The emissivity can be set in the range.1 to 1.9 in steps of.1. The FLT5A is supplied with the emissivity factory-set to 1.. The 'Emissivity' value is set using switches SW1 and SW2. See Fig. 6. When switch SW1 is set from 1 to 9, this denotes the first figure after the decimal point of the emissivity value. e.g. for an emissivity value of '.85', set SW1 to '8' and SW2 to '5'. When switch SW1 is set to, this denotes a '1' before, and a '' after, the decimal point of the emissivity value. The 'Emissivity' value is set using switches SW1 and SW2. See Fig. 6. When switch SW1 is set from 1 to 9, this denotes the first figure after the decimal point of the emissivity value. e.g. for an emissivity value of '.85', set SW1 to '8' and SW2 to '5'. When switch SW1 is set to, this denotes a '1' before, and a '' after, the decimal point of the emissivity value. e.g. for an emissivity value of '1.', set SW1 to '' and SW2 to ''. e.g. for an emissivity value of '1.', set SW1 to '' and SW2 to ''. Page 7 Page 7

14 FLT5A Thermometer FLT5A Thermometer Page 8 Page 8

15 FLT5A Thermometer FLT5A Thermometer 3.3 Adjusting the averager 'Response Speed' 3.3 Adjusting the averager 'Response Speed' The Averager time function is adjusted by the potentiometer P1. (See Fig. 6, Page 6). The Averager 'Response Speed' can be set to any value between 1 and 1 seconds (for to 95% of final reading). The Averager time function is adjusted by the potentiometer P1. (See Fig. 6, Page 6). The Averager 'Response Speed' can be set to any value between 1 and 1 seconds (for to 95% of final reading). 1) To increase the 'Response Speed' (i.e. make faster), turn the potentiometer P1 anticlockwise. When P1 is turned fully anticlockwise, the 'Response Speed' is 1 second. 2) To decrease the 'Response Speed' (i.e. make slower), turn the potentiometer P1 clockwise. When P1 is turned fully clockwise, the 'Response Speed' is 1 seconds. 1) To increase the 'Response Speed' (i.e. make faster), turn the potentiometer P1 anticlockwise. When P1 is turned fully anticlockwise, the 'Response Speed' is 1 second. 2) To decrease the 'Response Speed' (i.e. make slower), turn the potentiometer P1 clockwise. When P1 is turned fully clockwise, the 'Response Speed' is 1 seconds. 3.4 Note your settings 3.4 Note your settings Write down the settings for 'Emissivity' and 'Response Speed' in the spaces provided below. Use this table as a quick reference guide. Write down the settings for 'Emissivity' and 'Response Speed' in the spaces provided below. Use this table as a quick reference guide. Each time you adjust the settings, make a note in the table. Serial Number Date Emissivity Response Speed Each time you adjust the settings, make a note in the table. Serial Number Date Emissivity Response Speed Page 9 Page 9

16 Page 1 Page 1 Fig. 8 Connecting the plug to the socket S Fig. 8 Connecting the plug to the socket S Marker Marker Lugs Locking Sleeve Keyway Marker Lugs Locking Sleeve Keyway Marker Fig. 7 Location of the electrical connector AD99187 Fig. 7 Location of the electrical connector AD99187 Electrical connector Electrical connector Fast Fast FLT5A Thermometer FLT5A Thermometer

17 FLT5A Thermometer FLT5A Thermometer 3.5 Electrical connections 3.5 Electrical connections The electrical connections for the thermometer power supply and temperature output are made via the 6-way socket on the rear of the thermometer. See Fig. 7. The cable connections are as follows: The electrical connections for the thermometer power supply and temperature output are made via the 6-way socket on the rear of the thermometer. See Fig. 7. The cable connections are as follows: THERMOMETER CABLE CONNECTIONS THERMOMETER CABLE CONNECTIONS Thermometer Pin No. Function Cable Colour End Cap Pin No. Thermometer Pin No. Function Cable Colour End Cap Pin No V+, 4 to 2 ma Red V+, 4 to 2 ma Red V-, 4 to 2 ma Black V-, 4 to 2 ma Black 6 Electrical connection to the thermometer must be made by either: 6-way plug (LAND Part Nº ) 6-way plug housed in Back Cap (LAND Part Nº ) Pre-wired cable, 4m long (LAND Part Nº ) To connect the cable; 1) Refer to Fig. 8. Align the red marker near the lugs of the pre-wired plug with the red marker above the keyway in the socket on the thermometer. Electrical connection to the thermometer must be made by either: 6-way plug (LAND Part Nº ) 6-way plug housed in Back Cap (LAND Part Nº ) Pre-wired cable, 4m long (LAND Part Nº ) To connect the cable; 1) Refer to Fig. 8. Align the red marker near the lugs of the pre-wired plug with the red marker above the keyway in the socket on the thermometer. 2) Push the plug into the socket. To disconnect the cable; 1) Grip the locking sleeve section of the plug. 2) Push the plug into the socket. To disconnect the cable; 1) Grip the locking sleeve section of the plug. 2) Pull the plug outwards to release the locking mechanism and disconnect the cable. 2) Pull the plug outwards to release the locking mechanism and disconnect the cable. Page 11 Page 11

18 FLT5A Thermometer FLT5A Thermometer 4. MOUNTINGS AND ACCESSORIES 4. MOUNTINGS AND ACCESSORIES The FLT5A thermometer is compatible with all Land System 4 Mountings and Accessories. For the majority of float line applications, the following package of accessories is recommended: Air Purge: Part Nº Jacket: Part Nº Back Cap: Part Nº The FLT5A thermometer is compatible with all Land System 4 Mountings and Accessories. For the majority of float line applications, the following package of accessories is recommended: Air Purge: Part Nº Jacket: Part Nº Back Cap: Part Nº Air Purge Thermometer Jacket Back Cap Air Purge Thermometer Jacket Back Cap Fig. 9 Recommended mounting accessories for FLT5A S Fig. 9 Recommended mounting accessories for FLT5A S For more information on Mountings and Accessories, refer to the "Thermometer Mountings and Accessories Installation Guide". For more information on Mountings and Accessories, refer to the "Thermometer Mountings and Accessories Installation Guide". Page 12 Page 12

19 FLT5A Thermometer FLT5A Thermometer 5. MAINTENANCE 5. MAINTENANCE Thermometer maintenance consists mainly of ensuring that the lens is clean. If the lens becomes dirty, clean it with lens cleaning fluid and a soft cloth. If it is the lens is difficult to keep clean, it may be necessary to use the thermometer in conjunction with a suitable air purge (LAND Part Nº ). Contact LAND Infrared for more information. If the thermometer is used in conjunction with a cooling jacket, ensure that the flow rate for the cooling water is 1 litre per minute /.35 cu. ft per minute. Thermometer maintenance consists mainly of ensuring that the lens is clean. If the lens becomes dirty, clean it with lens cleaning fluid and a soft cloth. If it is the lens is difficult to keep clean, it may be necessary to use the thermometer in conjunction with a suitable air purge (LAND Part Nº ). Contact LAND Infrared for more information. If the thermometer is used in conjunction with a cooling jacket, ensure that the flow rate for the cooling water is 1 litre per minute /.35 cu. ft per minute. WARNING WARNING Never 'over-cool' the thermometer as this may result in condensation either on or inside the thermometer. Never 'over-cool' the thermometer as this may result in condensation either on or inside the thermometer. If the thermometer is used in conjunction with an air purge, check that the flow rate for the purge air is 1 litre per second / 2 cu. ft per minute. If the thermometer is used in conjunction with an air purge, check that the flow rate for the purge air is 1 litre per second / 2 cu. ft per minute. Page 13 Page 13

20 FLT5A Thermometer FLT5A Thermometer Page 14 Page 14