High-Voltage Trench MOS Barrier Schottky Rectifier Ultra Low V F = 0.50 V at I F = 5 A

Transcription

1 HighVoltage Trench MOS Barrier Schottky Rectifier Ultra Low V F = 0.50 V at I F = 5 TO0B TMBS ITO0B FETURES Trench MOS Schottky technology Low forward voltage drop, low power losses High efficiency operation V00S 3 VF00S 3 Meets MSL level, per JSTD00C, LF max peak of 45 C (for TO63B package) Solder dip 60 C, 40 seconds (for TO0B, ITO0B & TO6 package) CSE TO63B TO6 VB00S VI00S HETSIN PRIMRY CHRCTERISTICS I F(V) 0 V RRM 0 V I FSM 00 V F at I F = V T J max. 50 C 3 Component in accordance to RoHS 00/95/EC and WEEE 00/96/EC TYPICL PPLICTIONS For use in high frequency inverters, switching power supplies, freewheeling diodes, oring diode, dctodc converters and reverse battery protection. MECHNICL DT Case: TO0B, ITO0B, TO63B & TO6 Epoxy meets UL 94V0 flammability rating Terminals: Matte tin plated leads, solderable per JSTD00B and JESDB0D E3 suffix for commercial grade Polarity: s marked Mounting Torque: 0 inlbs maximum MXIMUM RTINGS (T = 5 C unless otherwise noted) PRMETER SYMBOL V00S VF00S VB00S VI00S UNIT Maximum repetitive peak reverse voltage V RRM 0 V Maximum average forward rectified current (see Fig. ) I F(V) 0 Peak forward surge current 8.3 ms single half sinewave superimposed on rated load I FSM 00 Isolation voltage (ITO0B only) From terminal to heatsink t = minute V C 500 V Operating junction ans storage temperature range T J, T STG 40 to + 50 C Revision: 09ug07

2 ELECTRICL CHRCTERISTICS (T = 5 C unless otherwise noted) PRMETER TEST CONDITIONS SYMBOL TYP. MX. UNIT Breakdown voltage at I R =.0 m T = 5 C V (BR) 0 (minimum) Instantaneous forward voltage () at I F = 5 I F = 0 I F = 0 at I F = 5 I F = 0 I F = 0 T = 5 C T = 5 C V F V Reverse current () at V R = 90 V T = 5 C T = 5 C at V R = 0 V T = 5 C T = 5 C I R µ m µ m Notes: () Pulse test: 300 µs pulse width, % duty cycle () Pulse test: 0 ms pulse width THERML CHRCTERISTICS (T = 5 C unless otherwise noted) PRMETER SYMBOL V00S VF00S VB00S VI00S UNIT Typical thermal resistance R θjc 4 C/W ORDERING INFORMTION (Example) PCGE PREFERRED P/N UNIT WEIGHT (g) PCGE CODE BSE QUNTITY DELIVERY MODE TO0B V00SE3/4W.88 4W 50/tube Tube ITO0B VF00SE3/4W.75 4W 50/tube Tube TO63B VB00SE3/4W.38 4W 50/tube Tube TO63B VB00SE3/8W.38 8W 800/reel Tape and reel TO6 VI00SE3/4W.45 4W 50/tube Tube RTINGS ND CHRCTERISTICS CURVES (T = 5 C unless otherwise noted) verage Forward Current () 5 Resistive or Inductive Load 0 V(B,I)00S 5 VF00S 0 5 Mounted on specific Heatsink Case Temperature ( C) verage Power Loss (W) 0 8 D = 0.5 D = 0.8 D = D = 0. D = 0. D =.0 T 0 D = tp/t tp verage Forward Current () Figure. Maximum Forward Current Derating Curve Figure. Forward Power Loss Characteristics Revision: 09ug07

3 Junction Capacitance (pf) Transient Thermal Impedance ( C/W) Transient Thermal Impedance ( C/W) Instantaneous Forward Current () 00 0 T = 50 C T = 5 C T = 00 C T = 5 C 0 Junction to Case V(B,I)00S Instantaneous Forward Voltage (V) Figure 3. Typical Instantaneous Forward Characteristics t Pulse Duration (s) Figure 6. Typical Transient Thermal Impedance Instantaneous Reverse Current (m) 000 T = 50 C 00 T = 5 C 0 T = 00 C 0. T = 5 C Percent of Rated Peak Reverse Voltage (%) Figure 4. Typical Reverse Characteristics 0 Junction to Case VF00S t Pulse Duration (s) Figure 7. Typical Transient Thermal Impedance 0000 T J = 5 C f =.0 MHz V sig = 50 mvpp Reverse Voltage (V) Figure 5. Typical Junction Capacitance Revision: 09ug07 3

4 PCGE OUTLINE DIMENSIONS in inches (millimeters) TO0B ITO0B 0.45 (0.54) MX (9.40) (9.4) 0.54 (3.9) 0.48 (3.74) 0.3 (.87) 0.03 (.6) 0.85 (4.70) 0.75 (4.44) (.39) (.4) 45 Ref (0.6) (9.75) Ref. (.93) Ref Ref. (.93) Ref. 7 Ref (3.56) DI. 0.5 (3.7) DI (4.83) 0.70 (4.3) 0.0 (.79) 0.00 (.54) 0.35 (3.43) DI. 0. (3.08) DI (6.3) 0.65 (5.87) 0.45 (3.68) 0.35 (3.43) (5.3) (4.55) (5.4) (4.73) (7.04) 0.65 (6.54) 7 Ref (4.06) 0.40 (3.56) (.45) (.4).48 (9.6).8 (8.40) (4.) (3.46) 0.0 (.79) 0.00 (.54) (4.) (3.46) (.45) (.4) 0.9 (4.85) 0.7 (4.35) (.45) (.4) 7 Ref. 0.0 (.79) 0.00 (.54) 0.05 (.67) (.4) 0.04 (.65) (.45) (0.90) 0.08 (0.70) 0.05 (5.0) 0.95 (4.95) 0.0 (0.56) 0.04 (0.36) 0.05 (0.64) 0.05 (0.38) 0.05 (.67) (.4) (0.89) 0.05 (0.64) 0.05 (5.) 0.95 (4.95) 0.08 (0.7) 0.00 (0.5) TO6 0.4 (0.45) Max (4.70) 0.75 (4.44) 30 (Typ) (REF) 0.50 (6.35) Min (.40) (.9) (.40) (.4) (4.3) 0.90 (3.37) 0.60 (4.06) 0.40 (3.56) (.95) (.94) 0.40 (0.9) 0.38 (9.68) 0.0 (.79) 0.00 (.54) (.45) (.4) (4.) (3.46) 0.04 (.65) (.45) (0.90) 0.08 (0.70) 0.05 (5.0) 0.95 (4.95) 0.0 (0.56) 0.04 (0.35) TO63B 0.4 (0.45) (9.65) 0.45 (6.) MIN 0.90 (4.83) 0.60 (4.06) (.40) (.4) Mounting Pad Layout 0.4 (0.66) (9.4) 0.30 (8.3) (0.940) 0.07 (0.686) 0.05 (.67) (.4) 0.64 (5.85) 0.59 (5.00) 0.05 (5.0) 0.95 (4.95) (.40) (.9) 00.0 (00.54) 0.0 (.79) (.9) 0.0 (0.53) 0.04 (0.36) 0.40 (3.56) 0.0 (.79) (7.0) 0.59 (5.00) 0.08 (.03) 0.05 (.67) (0.095) (.4) 0.33 (8.38) 0.5 (3.8) 4 Revision: 09ug07

5 Notice Legal Disclaimer Notice Vishay Specifications of the products displayed herein are subject to change without notice. Vishay Intertechnology, Inc., or anyone on its behalf, assumes no responsibility or liability for any errors or inaccuracies. Information contained herein is intended to provide a product description only. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document. Except as provided in Vishay's terms and conditions of sale for such products, Vishay assumes no liability whatsoever, and disclaims any express or implied warranty, relating to sale and/or use of Vishay products including liability or warranties relating to fitness for a particular purpose, merchantability, or infringement of any patent, copyright, or other intellectual property right. The products shown herein are not designed for use in medical, lifesaving, or lifesustaining applications. Customers using or selling these products for use in such applications do so at their own risk and agree to fully indemnify Vishay for any damages resulting from such improper use or sale. Document Number: 9000 Revision: 08pr05