Metallized Polyester Film Capacitor Related Document: IEC
|
|
- Edwin Elliott
- 6 years ago
- Views:
Transcription
1 Metallized Polyester Film Capacitor Related Document: IEC MKT 8 Dimensions in millimeters Ø d FEATURES Product is completely lead (Pb)-free Product is RoHS compliant 40.0 ±.0 L 40.0 ±.0 Max. d D > >.0 < MAIN APPLICATIONS Blocking, bypassing, filtering, timing, coupling and decoupling, interference suppression in low voltage applications. MARKING Manufacturer's logo/type/c-value/rated voltage/tolerance/ date of manufacture DIELECTRIC Polyester film ELECTRODES Vacuum deposited aluminum COATING Plastic-wrapped, epoxy resin sealed. Also available as flame retardant version. CONSTRUCTION Extended metallized film (refer to general information) LEADS Tinned wire IEC TEST CLASSIFICATION /0/6, according to IEC OPERATING TEMPERATURE RANGE - C to + 0 C RANGE 40pF to µf TOLERANCES ± 0% (M), ± % (K), ± % (J) TEST (ELECTRODE/ELECTRODE).6 x U R for s D Max. RATED S (U R ) 6 VDC, 0 VDC, 0 VDC, 400 VDC, 60 VDC, 00 VDC PERMISSIBLE AC S (RMS) UP TO 60Hz 40 VAC, 6 VAC, 60 VAC, 00 VAC, 0 VAC, 0 VAC INSULATION RESISTANCE Measured at 0 VDC (6 VDC series measured at 0 VDC) after one minute For C 0.µF and U R > 0 VDC 0,000 MΩ minimum value (60,000 MΩ typical value) For C 0.µF and U R 0 VDC,000 MΩ minimum value (0,000 MΩ typical value) TIME CONSTANT Measured at 0 VDC (6 VDC series measured at 0 VDC) after one minute For C > 0.µF and U R > 0 VDC,000 s minimum value (0,000 s typical value) For C > 0.µF and U R 0 VDC 000 s minimum value (,000 s typical value) DRIFT Up to + 40 C, ±.% for a period of two years DERATING FOR DC AND AC. CATEGORY U C At + 8 C: U C = U R At + 0 C: U C = 0.8 U R SELF INDUCTANCE ~ nh measured with 6mm long leads PULL TEST ON LEADS 0 N in direction of leads according to IEC e RoHS COMPLIANT BEND TEST ON LEADS Two bends through 90 C with half of the force used in pull test RELIABILITY Operational life > 00,000 h Failure rate < FIT (40 C and 0. x U R ) For further details, please refer to the general information available at MAXIMUM PULSE RISE TIME CAPACITOR Maximum Pulse Rise Time d v /d t [V/µs] LENGTH (mm) 6 VDC 0 VDC 0 VDC 400 VDC 60 VDC 00 VDC If the maximum pulse voltage is less than the rated voltage higher d v /d t values can be permitted. Document Number: 60 For technical questions contact; dc-film@vishay.com Revision: -Jun-0
2 MKT 8 Metallized Polyester Film Capacitor Related Document: IEC DISSIPATION FACTOR TAN δ MEASURED AT C µf µf < C µf C > µf khz 8 x - 8 x - x - khz x - x - 0kHz x - Maximum values 06 6 VDC/ 40 VAC 0 0 VDC/ 6 VAC 0 VDC/ 60 VAC VDC/ 00 VAC 6* 60 VDC/ 0 VAC * 00 VDC/ 0 VAC D L D L D L D L D L D L 40pF pF pF pF pF pF pF pF µF µF µF µF µF µF µf ** µf µF ** 0.µF ** 0.4µF ** 0.68µF ** µf For technical questions contact; dc-film@vishay.com Document Number: 60 Revision: -Jun-0
3 Metallized Polyester Film Capacitor Related Document: IEC MKT 8.µF VDC/ 40 VAC 0 0 VDC/ 6 VAC 0 VDC/ 60 VAC VDC/ 00 VAC 6* 60 VDC/ 0 VAC * 00 VDC/ 0 VAC D L D L D L D L D L D L **.**.µF ** **.µF ** ** 4.µF ** 6.8µF µF ** µf µF Further C-values upon request. PCM = L +. *Not suitable for mains applications. Please refer to X-capacitors in our catalog RFI Suppression Capacitors. **For the smaller size please add - M at the end of the type designation (e.g. MKT 8-/-M). Not CECC approved. RECOMMENDED PACKAGING LETTER TYPE OF PACKAGING REEL DIAMETER (mm) ORDERING EXAMPLES G AMMO MKT G X R REEL 0 MKT R X BULK for L >.mm MKT X Document Number: 60 For technical questions contact; dc-film@vishay.com Revision: -Jun-0
4 MKT 8 Metallized Polyester Film Capacitor Related Document: IEC VDC VDC VDC VDC Capacitance in pf and µf VDC Capacitance in pf and µf 00 VDC For technical questions contact; dc-film@vishay.com Document Number: 60 4 Revision: -Jun-0
5 Notice Legal Disclaimer Notice Vishay Specifications of the products displayed herein are subject to change without notice. Vishay Intertechnology, Inc., or anyone on its behalf, assumes no responsibility or liability for any errors or inaccuracies. Information contained herein is intended to provide a product description only. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document. Except as provided in Vishay's terms and conditions of sale for such products, Vishay assumes no liability whatsoever, and disclaims any express or implied warranty, relating to sale and/or use of Vishay products including liability or warranties relating to fitness for a particular purpose, merchantability, or infringement of any patent, copyright, or other intellectual property right. The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications. Customers using or selling these products for use in such applications do so at their own risk and agree to fully indemnify Vishay for any damages resulting from such improper use or sale. Document Number: Revision: 08-Apr-0
Metallized Polypropylene Film Capacitor Related Document: IEC
Metallized Polypropylene Film Capacitor Related Document: IEC 6084-6 MKP 84 L Max. Dimensions in millimeters W Max. Marking FEATURES Product is completely lead (Pb)-free Product is RoHS-compliant 0.6 pcm
More informationMetallized Polypropylene Capacitor, Mini-Version (-M) Related Document: CECC
MKP 840.../...-M Metallized Polypropylene Capacitor, Mini-Version (-M) Related Document: CECC 00 0.6 pcm ± 0.4 Dimensions in millimeters MAIN APPLICATIONS High frequency and pulse operations. Deflection
More informationMetallized Polypropylene Film Capacitor Related Document: IEC
Related Document: IEC 6084-16 MKP 184 Dimensions in millimeters 40.0 ±.0 L 40.0 ±.0 Max. MAIN APPLICATIONS High voltage, high current and high pulse operations, deflection circuits in TV sets (S-correction
More informationMetallized Polypropylene Film Capacitor Related Document: IEC
MKP 184 Metallized Polypropylene Film Capacitor Related Document: IEC 6084-16 MAIN APPLICATIONS: High voltage, high current and high pulse operations, deflection circuits in TV sets (S-correction and fly-back
More informationDouble Metallized Polypropylene Film Capacitor Radial AC and Pulse Capacitor
End of Life September 018 - Alternative Device: MMKP8 Double Metallized Polypropylene Film Capacitor Radial AC and Pulse Capacitor FEATURES Material categorization: for definitions of compliance please
More informationAC and Pulse Film/Foil Capacitors Radial Potted Type
KP186 AC and Pulse Film/Foil Capacitors Radial Potted Type FEATURES Material categorization: For definitions of compliance please see www.vishay.com/doc?9991 APPLICATIONS High voltage, very high current
More informationSolid Tantalum Chip Capacitors, TANTAMOUNT, Conformal Coated, Maximum CV, Low ESR
Solid Tantalum Chip Capacitors, TANTAMOUNT, Conformal Coated, Maximum CV, Low FEATURES Large capacitance rating range Mounting: Surface mount Lowest for a surface mount tantalum chip capacitor Terminations:
More informationDC Film Capacitors MKT Axial Type
MKT181 DC Film Capacitors MKT Axial Type FEATURES Supplied loose in box, taped on ammopack or reel Material categorization: For definitions of compliance please see www.vishay.com/doc?9991 APPLICATIONS
More informationDC Film Capacitors MKT Axial Type
MKT 181 Ø d FEATURES Supplied loose in box, taped on ammopack or reel RoHS compliant L 40.0 ±.0 40.0 ±.0 Max. Dimensions in mm D Max. ENCAPSULATION Plastic-wrapped, epoxy resin sealed, flame retardant
More informationCeramic Disc Capacitors Class 1 and 2, 500 V DC, General Purpose
D Series Ceramic Disc Capacitors D D FEATURES Low losses High stability Tangent line SH Tangent line SH High capacitance in small size Kinked (preferred) or straight leads Compliant to RoHS directive 2002/95/EC
More informationMetallized Polyester Film Capacitors MKT Radial Potted Type
www.vishay.com Metallized Polyester Film Capacitors MKT Radial Potted Type FEATURES 7.5 mm lead pitch Supplied loose in box and taped on reel or ammopack Material categorization: for definitions of compliance
More informationMetallized Polyester Film Capacitors MKT Radial Potted Types
www.vishay.com Metallized Polyester Film Capacitors MKT Radial Potted Types FEATURES Material categorization: for definitions of compliance please see www.vishay.com/doc?99912 APPLICATIONS Blocking, bypassing,
More informationAluminum Capacitors Axial Miniature, Long-Life
8 AML 0 ASM Fig. Component outlines smaller dimensions 8 AML Aluminum Capacitors longer life 8 AHT 0 ATC FEATURES Polarized aluminum electrolytic capacitors, non-solid electrolyte Axial leads, cylindrical
More informationAluminum Capacitors Power Printed Wiring Style
FEATURES Polarized aluminum electrolytic capacitors, non-solid electrolyte Large types, cylindrical aluminum case, insulated Provided with keyed polarity Very long useful life: 000 h at 8 C Low ESR, high
More informationSurface Mounted Power Resistor Thick Film Technology
D2TO20 DIMENSIONS in millimeters 1.6 10.1 Surface Mounted Power Resistor 1.25 4.5 FEATURES 20 W at 25 C case temperature Surface mounted resistor - TO - 263 (D2 PAK) style package Wide resistance range
More informationAluminum Capacitors Radial Very Low Impedance
6 RVI Aluminum Capacitors FEATURES Polarized aluminum electrolytic capacitors, non-solid electrolyte Radial leads, cylindrical aluminum case with RoHS COMPLIANT pressure relief, insulated with a blue vinyl
More informationHermetically Sealed, Axial-Lead to CECC Specifications
Hermetically Sealed, Axial-Lead CTS1, CTS13, 749DX FEATURES Terminations: Tin/lead (SnPb), 100 % tin (RoHS compliant) Hermetically sealed metal case with plastic film insulation Extended capacitance range
More informationAluminum Capacitors Radial Miniature, High Voltage
152 RMH Aluminum Capacitors Fig.1 Component outline QUICK REFERENCE DATA DESCRIPTION VALUE Nominal case sizes ( x L in mm) 10 x 12 to 18 x 35 Rated capacitance range, C R 1.0 to 220 µf Tolerance on C R
More informationAC and Pulse Metallized Polypropylene Film Capacitors MKP Radial Potted Type
AC and Pulse Metallized Polypropylene Film Capacitors MKP Radial Potted Type FEATURES 5 mm to 37.5 mm lead pitch Material categorization: for definitions of compliance please see www.vishay.com/doc?9992
More informationDC Film Capacitors MKT Radial Potted Type
DC Film Capacitors MKT Radial Potted Type MKT80 FEATURES AEC-Q00 qualified (rev. D) for PCM. mm (for larger available components on request) High temperature capabilities, up to 0 C Capacitance up to 60
More informationResin-Molded, Radial-Lead Solid Tantalum Capacitors
Resin-Molded, Radial-Lead Solid Tantalum Capacitors PERFORMANCE CHARACTERISTICS Operating Temperature: -55 C to +25 C (above 85 C, voltage derating is required) Capacitance Range: 0. μf to 3 μf Capacitance
More informationAluminum Capacitors Power Long Life Snap-In
0/0 PLL-SI PUL-SI smaller dimensions 0/0 PLL-SI QUICK REFERENCE DATA DESCRIPTION VALUE 0 0 Nominal case sizes (Ø D x L in mm) x to x 0 Rated capacitance range (E series), to 000 µf Tolerance on ± 0 % Rated
More informationDC Film Capacitors MKT Radial Lacquered Type
l 467 w FEATURES Available taped and loose in box RoHS compliant Seating plane (1) h APPLICATIONS Blocking and coupling, bypass and energy reservoir. α (2) l t REFERENCE STANDARDS IEC 60384-2 MARKING C-value;
More informationCeramic Disc DC Capacitors Class 2, Low Loss 500 V, 1 kv, 2 kv and 3 kv
Ceramic Disc DC Capacitors Class 2, tangent line D SH FEATURES High reliability Low losses High capacitance in small size Kinked leads Compliant to RoHS directive 2002/95/EC F Capacitors with inside kink
More informationAC and Pulse Metallized Polypropylene Film Capacitors MKP Axial Type
Vishay Roederstein AC and Pulse Metallized Polypropylene Film Capacitors FEATURES Supplied loose in box, taped on ammopack or reel available on request l t APPLICATIONS High current and high pulse operations
More informationAxial Leaded Multilayer Ceramic Capacitors for Automotive Applications Class 1 and Class 2, 50 V DC, 100 V DC, 200 V DC
Axial Leaded Multilayer Ceramic Capacitors for Automotive Applications Class 1 and Class 2, 50 V DC, 100 V DC, 200 V DC FEATURES AEC-Q200 qualified with PPAP available High reliability MLCC insert with
More informationCeramic Disc Capacitors Class 2, low loss 500 V, 1 kv, 2 kv and 3 kv
Vishay Bcomponents eramic Disc apacitors MARKING tangent line D F SH apacitors with inside kink lead spacing tangent line Marking indicates capacitance value and tolerance in accordance with EIA 198 and
More informationSolid-Electrolyte TANTALEX Capacitors, Hermetically Sealed, Axial-Lead, CECC Approved
Solid-Electrolyte TANTALEX Capacitors, Hermetically Sealed, Axial-Lead, CECC Approved PERFORMANCE CHARACTERISTICS Operating Temperature: -55 C to +85 C (types CTS13) -55 C to +125 C (types CTS1, 749DX)
More informationCeramic Disc Capacitors Class 1 and 2, 100 V DC, General Purpose
D Series Ceramic Disc Capacitors D D EATURES Low losses High stability Tangent line SH Tangent line DR High capacitance in small size Kinked (preferred) or straight leads Compliant to RoHS directive 2002/95/EC
More informationCeramic Disc Capacitors Class 1, 3 kv DC
S Series Ceramic Disc Capacitors D D FEATURES Low losses High stability Tangent line SH Tangent line SH High capacitance in small size Kinked (preferred) or straight leads Compliant to RoHS directive 2002/095/EC
More informationHigh Ohmic/High Voltage Resistors
High Ohmic/High Voltage Resistors A metal glazed film is deposited on a high grade ceramic body. After a helical groove has been cut in the resistive layer, tinned electrolytic copper wires are welded
More informationResin-Molded, Radial-Lead Solid Tantalum Capacitors
Resin-Molded, Radial-Lead Solid Tantalum Capacitors PERFORMANCE CHARACTERISTICS Operating Temperature: - 55 C to +25 C (above 85 C, voltage derating is required) Capacitance Range: 0. μf to 3 μf Capacitance
More informationAC Line Rated Ceramic Disc Capacitors Class X1, 760 V AC, Class Y1, 500 V AC
AC Line Rated Ceramic Disc Capacitors Class X1, 760 V AC, Class Y1, 500 V AC FEATURES Complying with IEC 60384-14 4 th edition Can pass 10 kv pulses (10 per polarity) Withstands 85 / 85 / 1000 h test Reduced
More informationRF Power Feed-Through Capacitors with Conductor Rod, Class 1 Ceramic
DB 06030, DB 06040, DB 06060 RF Power Feed-Through Capacitors with Conductor Rod, Class Ceramic FEATURES Small size Geometry minimizes inductance Wide range of capacitance values APPLICATIONS Filtering
More informationFEATURES [31.750] Min.
Polyester Film/Foil Capacitors Sleeved, Miniature, Axial ead FEATURES Axial lead, designed for automatic insertion Non-inductively wound, extended foil construction ead wire has metal end cap for connection
More informationDC Film Capacitors MKT Radial Potted Type
DC Film Capacitors MKT Radial Potted Type FEATURES 15 mm to 27.5 mm lead pitch. Supplied loose in box and taped on reel Material categorization: for definitions of compliance please see www.vishay.com/doc?99912
More informationPower Resistors, for Mounting onto a Heatsink Thick Film Technology
RCH Manufactured in cermet thick fi lm technology, these power resistors exhibit remarkable characteristics and the series includes 4 types ranging from 5 W to 50 W Designed to be mounted onto a heatsink,
More informationFilter Inductors, High Current, Radial Leaded
Filter Inductors, High Current, Radial Leaded ELECTRICAL SPECIFICATIONS Inductance: Measured at 1.0 V with zero DC current Dielectric: 2500 V RMS between winding and 0.250" [6.35 mm] of insulating covering
More informationAluminum Electrolytic Capacitors Axial High Temperature High Voltage for E.L.B.
Aluminum Electrolytic Capacitors Axial High Temperature High Voltage for E.L.B. 04-043 ASH standard 04/043 AHH-ELB 550 V/4 h Fig. 85 C 04/043 AMH-ELB 550 V/4 h FEATURES Useful life: 0 000 h at 05 C Stable
More informationDC Film Capacitors MKT Radial Lacquered Type
DC Film Capacitors MKT Radial Lacquered Type FEATURES Available taped and loose in box Material categorization: for definitions of compliance please see www.vishay.com/doc?99912 APPLICATIONS Blocking and
More informationAluminum Electrolytic Capacitors Axial Standard
00/0 AS Aluminum Electrolytic Capacitors Axial Standard 04/04 ASH high voltage 00/0 AS smaller dimensions 0 ASM Fig. QUICK REFERENCE DATA DESCRIPTION VALUE Nominal case sizes (Ø D x L in mm) 4.5 x 0 to
More informationAluminum Electrolytic Capacitors Axial Miniature, Long-Life
Aluminum Electrolytic Capacitors Axial Miniature, Long-Life 38 AML 0 ASM smaller dimensions Fig. QUICK REFERENCE DATA DESCRIPTION Nominal case sizes (Ø D x L in mm) 6.3 x.7 to 0 x 5 VALUE 0 x 30 to x 38
More informationRF Power Pot Capacitors with Mounting Tags, Class 1 Ceramic
T. 045090, T. 04520, T. 04550 RF Power Pot Capacitors with Mounting Tags, Class Ceramic FEATURES High reliability Multiple terminals Wide range of capacitance values APPLICATIONS Induction and dielectric
More informationAluminum Capacitors FEATURES APPLICATIONS PACKAGING
Aluminum Capacitors FEATURES Load life: 2000 h at 105 C Extra low impedance, high ripple current Polarized SMD aluminum electrolytic capacitors, non solid electrolyte Material categorization: for definitions
More informationAluminum Electrolytic Capacitors Radial, Enhanced High Temperature, Low Impedance
Aluminum Electrolytic Capacitors Radial, Enhanced High Temperature, Low Impedance 40 RTM lower Z longer life 25 C 50 C 50 RMI 46 RTI Fig. QUICK REFERENCE DATA DESCRIPTION VALUE Nominal case sizes (Ø D
More informationAluminum Capacitors SMD (Chip) Long Life Vertical
Not for New Designs - Alternative Device: 53 CRV 53 CLV 40 CLH FEATURES Polarized aluminum electrolytic capacitors, non-solid electrolyte, self healing SMD-version with base plate, vertical construction
More information5 mm Square Surface Mount Miniature Trimmers Multi-Turn Cermet Sealed
5 mm Square Surface Mount Miniature Trimmers Multi-Turn Cermet Sealed DESIGN SUPPORT TOOLS Models Available click logo to get started FEATURES 0.5 W at 70 C Professional and industrial grade Wide ohmic
More informationAluminum Capacitors FEATURES APPLICATIONS PACKAGING
Aluminum Capacitors QUICK REFERENCE DATA DESCRIPTION VALUE Nominal case size (Ø D x L in mm) 4 x 5.3 to 12.5 x 13.5 Rated capacitance range, 10 μf to 2200 μf Capacitance tolerance ± 20 % Rated voltage
More informationAluminum Capacitors Power Standard Miniature Snap-In
Aluminum Capacitors Power Standard Miniature Snap-In Fig. QUICK REFERENCE DATA DESCRIPTION / PUM-SI smaller dimensions 0/0 PSM-SI long life 0 C Note () A 0 V range is available on request 0/0 PLL-SI VALUE
More informationAC Line Rated Ceramic Disc Capacitors Class X1, 760 V AC, Class Y1, 500 V AC
AC Line Rated Ceramic Disc Capacitors Class X1, 760 V AC, Class Y1, 500 V AC FEATURES Complying with IEC 60384-14 4 th edition High reliability Vertical (inline) kinked or straight leads Singlelayer AC
More informationRF Power Feed-Through Capacitors with Conductor Rod, Class 1 Ceramic
DB 030088, DB 03000 RF Power Feed-Through Capacitors with Conductor Rod, Class Ceramic FEATURES Small size Geometry minimizes inductance Wide range of capacitance values APPLICATIONS Filtering purposes
More informationAC and Pulse Double Metallized Polypropylene Film Capacitors MMKP Radial Potted Type
AC and Pulse Double Metallized Polypropylene Film Capacitors MMKP Radial Potted Type FEATURES 7.5 mm to 37.5 mm lead pitch Material categorization: for definitions of compliance please see /doc?99912 APPLICATIONS
More informationRF Power Pot Capacitors with Mounting Tags, Class 1 Ceramic
RF Power Pot Capacitors with Mounting Tags, Class Ceramic FEATURES Small size High reliability Wide range of capacitance values APPLICATIONS Induction and dielectric heating Antenna units Filter, bypass,
More informationMetallized Polyester Film Capacitors MKT Radial Potted Type
Metallized Polyester Film Capacitors MKT470 FEATURES 168x12(halfpage) l w Pitch 5 mm available loose in box, ammopack and taped on reel. Compliant to RoHS Directive 2002/95/EC P±0.3 Dimensions in APPLICATIONS
More informationAluminum Capacitors SMD (Chip), High Temperature
Not Recommended for New Designs, Use 50 CR Aluminum Capacitors SMD (Chip), High Temperature 50 CL 53 CRV Lead (Pb)-free 40 CLH 5 C high temperature 53 CLV Fig. low 50 CL QUICK REFERENCE DATA DESCRIPTION
More informationAluminum Capacitors SMD (Chip) Standard. Table 1
085 CS Aluminum Capacitors Fig.1 Component outlines longer 085 CS 139 CLL life QUICK REFERENCE DATA DESCRIPTION VALUE Nominal case sizes (L x W x H in mm) 8.8 x 3.7 x 3.9 and 11.9 x 3.7 x 3.9 Rated capacitance
More informationMetal Film, Cylindrical Resistors
NOT FOR NEW DESIGNS Metal Film, Cylindrical Resistors FEATURES Stable metal film on high quality ceramic Very low TC and tight tolerances Excellent stability at different environmental conditions Pure
More informationSolid Tantalum SMD Capacitors TANTAMOUNT, Hi-Rel COTS, Low ESR, Metal Case
Solid Tantalum SMD Capacitors TANTAMOUNT, Hi-Rel COTS, Low ESR, Metal Case PERFORMANCE CHARACTERISTICS Operating Temperature: -55 C to +125 C (above 85 C, voltage derating is required) Capacitance Range:
More informationWet Tantalum Capacitors Silver Case with Glass-to-Metal Hermetic Seal, TANTALEX
Wet Tantalum Capacitors Silver Case with Glass-to-Metal Hermetic Seal, TANTALEX PERFORMANCE CHARACTERISTICS Operating Temperature: -55 C to +85 C (+125 C with voltage derating) Capacitance Range: 738D
More informationSuperTan Extended (STE) Capacitors, Wet Tantalum Capacitors with Hermetic Seal
SuperTan Extended () Capacitors, Wet Tantalum Capacitors with Hermetic Seal FEATURES SuperTan Extended () represents a major breakthrough in wet tantalum capacitor Available technology. Its unique cathode
More informationHigh-Voltage Schottky Rectifier
High-Voltage Schottky Rectifier MBR(F,B)090 & MBR(F,B)0 TO-0AC TMBS ITO-0AC FEATURES Trench MOS Schottky technology Lower power losses, high efficiency Low forward voltage drop High forward surge capability
More informationFEATURES BODY DIA. MAX. Type M AWG 30: [0.254] Type C AWG 28: [0.320] Type T AWG 30: [0.254]
M, C, T NTC Thermistors, Coated FEATURES Small size - conformally coated. Wide resistance range. Available in 11 different R-T curves. DESCRIPTION Models M, C, and T are conformally coated, leaded thermistors
More informationAluminum Electrolytic Capacitors Power Long Life Snap-In
Aluminum Electrolytic Capacitors Power Long Life Snap-In PUL-SI smaller dimensions 0/0 PLL-SI Fig. QUICK REFERENCE DATA DESCRIPTION VALUE 0 0 Nominal case sizes (Ø D x L in mm) x to x 0 Rated capacitance
More informationAluminum Electrolytic Capacitors Radial Miniature, Low Impedance
Aluminum Electrolytic Capacitors Radial Miniature, Low Impedance 36 RVI miniaturize FEATURES Very long useful life: 4000 h to 0 000 h at 05 C, high stability, high reliability Very low impedance and low
More informationAluminum Electrolytic Capacitors Power Standard Miniature Snap-In
Aluminum Electrolytic Capacitors Power Standard Miniature Snap-In Fig. QUICK REFERENCE DATA DESCRIPTION / PUM-SI smaller dimensions 0/0 PSM-SI long life 0 C Note () A 0 V range is available on request
More informationSurface Mount Multilayer Ceramic Chip Capacitors for Safety Certified Applications
Surface Mount Multilayer Ceramic Chip Capacitors for Safety Certified Applications FEATURES Approved IEC 60384-14 Specialty: safety certified capacitors Wet build process Reliable Noble Metal Electrode
More informationSurface Mount Multilayer Ceramic Capacitors for Pulse Current Applications
Surface Mount Multilayer Ceramic Capacitors for Pulse Current Applications ELECTRICAL SPECIFICATIONS Note Electrical characteristics at +25 C unless otherwise specified FEATURES Low electrostrictive ceramic
More informationType 225P. Vishay Sprague Polyester Capacitors Filmite "E", ORANGE DROP, Radial Lead
Vishay prague Polyester Capacitors Filmite "E", ORANGE DROP, Radial ead PERFORMANCE CHARACERIIC Operating emperature: - 55 C to + 85 C. o + 105 C when working voltage is reduced to 70% of + 85 C rating;
More informationAluminum Electrolytic Capacitors Radial Miniature Long Life
Aluminum Electrolytic Capacitors Radial Miniature Long Life 6 RLL lower CV-values RMH high voltage longer life 6 RVI miniaturized 0 RMI lower miniaturized 8 RUS Fig. QUICK REFERENCE DATA DESCRIPTION VALUE
More informationCarbon Film Resistors, Standard
LCA... STANDARD ELECTRICAL SPECIFICATIONS FEATURES Securely bonded carbon film Good moisture resistance (ΔR max ±.5 % R) Good long term stability (ΔR max ±.5 % R, for h) Lead (Pb)-free solder contacts
More informationAluminum Capacitors SMD (Chip) Long Life Vertical
Aluminum Capacitors SMD (Chip) Long Life Vertical FEATURES Polarized aluminum electrolytic capacitors, non-solid electrolyte, self healing SMD-version with base plate, vertical construction requiring minimum
More informationAluminum Electrolytic Capacitors Power Long Life Snap-In
Aluminum Electrolytic Capacitors Power Long Life Snap-In PUL-SI smaller dimensions 0/0 PLL-SI Fig. QUICK REFERENCE DATA DESCRIPTION VALUE 0 0 Nominal case sizes (Ø D x L in mm) x to x 0 Rated capacitance
More informationAluminum Electrolytic Capacitors Power Economic Printed Wiring
Aluminum Electrolytic Capacitors Power Economic Printed Wiring 0/0 PECPW 00/0 PEDPW Fig. QUICK REFERENCE DATA DESCRIPTION high ripple current 0/0 PECPW long life 0 C Nominal case size (Ø D x L in mm) Rated
More informationAluminum Electrolytic Capacitors SMD (Chip) Long Life Vertical
Aluminum Electrolytic Capacitors SMD (Chip) Long Life Vertical FEATURES Polarized aluminum electrolytic capacitors, non-solid electrolyte, self healing SMD-version with base plate, vertical construction
More informationSurface Mount Multilayer Ceramic Chip Capacitors for Ultra Small Commodity Applications
Surface Mount Multilayer Ceramic Chip Capacitors for Ultra Small Commodity Applications FEATURES High capacitance in unit size High precision dimensional tolerances Suitably used in high-accuracy automatic
More informationSurface Mount Multilayer Ceramic Chip Capacitors DSCC Qualified Type 05007
Surface Mount Multilayer Ceramic Chip Capacitors DSCC Qualified Type 05007 FEATURES US defense supply center approved Federal stock control number, Available CAGE CODE 2770A Available Case size 1206 Stable
More informationConductive Polymer Aluminum Capacitors SMD (Chip), Low Impedance
Conductive Polymer Aluminum Capacitors SMD (Chip), Low Impedance FEATURES Long useful life: up to 5000 h at 105 C Very low ESR and highest ripple current SMD-version with base plate, lead (Pb) free reflow
More informationRF Power Plate Capacitors for Higher Voltages, Class 1 Ceramic
RF Power Plate Capacitors for Higher Voltages, Class Ceramic FEATURES Low losses High reliability High voltage ratings APPLICATIONS These high quality power plate capacitors are designed for usage in high
More informationAluminum Electrolytic Capacitors Radial Semi-Professional
Aluminum Electrolytic Capacitors Radial Semi-Professional 03 RLC low leakage current 8 RUS higher CV- values miniaturized 038 RSU ig. longer life RLL QUICK REERENCE DATA DESCRIPTION VALUE Nominal case
More information30 W Power Resistor Thick Film Technology
30 W Power Resistor Thick Film Technology LTO series are the extension of RTO types. We used the direct ceramic mounting design (no metal tab) of our RCH power resistors applied to semiconductor packages.
More information50 W Power Resistor, Thick Film Technology, TO-220
50 W Power Resistor, Thick Film Technology, TO-220 DESIGN SUPPORT TOOLS click logo to get started FEATURES 50 W at 25 C heatsink mounted Adjusted by sand trimming Leaded or surface mount versions High
More informationDouble Layer Capacitors
96 DLC Double Layer Capacitors Form A Fig. Component outline Form B FEATURES Polarized capacitor with high charge density, alternative product to rechargeable backup batteries Dielectric: electric double
More informationStandard Carbon Film Leaded Resistors
Standard Carbon Film Leaded Resistors FEATURES Securely bonded carbon film Good moisture resistance ( R max. ±.5 % R) Good long term stability ( R max. ±.5 % R, for h) Low noise (refer to graph) Suitable
More informationDC Film Capacitors MKT Radial Potted Type
DC Film Capacitors MKT Radial Potted Type FEATURES 7.62 mm lead pitch. Supplied loose in box and taped on reel or ammopack AEC-Q200 qualified Material categorization: For definitions of compliance please
More informationNTC Thermistors, Accuracy Line
FEATURES Accuracy over a wide temperature range High stability over a long life Excellent price/performance ratio Old part number was 2322 640 3/4/6... Component in accordance to RoHS 2002/95/EC and WEEE
More informationAluminum Capacitors Solid Axial
SAL-A End of Life. Last Available Purchase Date is -December- Radial higher CV/volume Fig. QUICK REFERENCE DATA DESCRIPTION VALUE Maximum case size (Ø D x L in mm) 6.7 x. to.9 x. Rated capacitance range
More informationFusible Carbon Film MELF Resistors
Fusible Carbon Film MELF Resistors FEATURES Fusible resistor for constant voltage designed for overload protection Special trimming to provide the fusing characteristic Flame retardant coating Pure tin
More informationAC and Pulse Double Metallized Polypropylene Film Capacitors MMKP Radial Potted Type
AC and Pulse Double Metallized Polypropylene Film Capacitors MMKP Radial Potted Type FEATURES 7.5 mm to 37.5 mm lead pitch; 7.5 mm bent back pitch Low contact resistance Low loss dielectric Small dimensions
More informationSolid-Electrolyte TANTALEX Capacitors, Axial-Leaded, Molded Case
Solid-Electrolyte TANTALEX Capacitors, Axial-Leaded, Molded Case PERFORMANCE CHARACTERISTICS Operating Temperature: -55 C to +85 C (to +125 C with voltage derating) Capacitance Tolerance: at 120 Hz, +25
More informationSurface Mount Multilayer Ceramic Chip Capacitor Solutions for High Voltage Applications
Surface Mount Multilayer Ceramic Chip Capacitor Solutions for High Voltage Applications ELECTRICAL SPECIFICATIONS X7R GENERAL SPECIFICATION Note Electrical characteristics at +25 C unless otherwise specified
More informationWet Tantalum Capacitors, High Energy, Ultra High Capacitance, -55 C to +125 C Operation
Wet Tantalum Capacitors, High Energy, Ultra High Capacitance, -55 C to +125 C Operation FEATURES High energy, very high capacitance design All tantalum, hermetically sealed case Utilizes proven SuperTan
More informationFEATURES. Note 138D 306 X0 006 C 2 E3 MODEL CAPACITANCE CAPACITANCE TOLERANCE DC VOLTAGE RATING AT +85 C
Wet Tantalum Capacitors Silver Case TANTALEX Capacitors Hermetically-Sealed FEURES Terminations: axial, standard tin / lead (SnPb), 100 % tin (RoHS-compliant) available Available Model is the commercial
More informationSolid Tantalum Surface Mount Chip Capacitors TANTAMOUNT, Molded Case, for Medical Instruments
Solid Tantalum Surface Mount Chip Capacitors TANTAMOUNT, Molded Case, for Medical Instruments FEATURES For non-life support medical applications High reliability Weibull grading options DC leakage at 0.005
More informationPower Resistor Thick Film Technology
Power Resistor Thick Film Technology DESIGN SUPPORT TOOLS click logo to get started FEATURES 50 W at 25 C case temperature heatsink mounted Direct mounting ceramic on heatsink Broad resistance range: 0.010
More informationPower Resistor Thick Film Technology
Power Resistor Thick Film Technology LTO series are the extension of RTO types. We used the direct ceramic mounting design (no metal tab) of our RCH power resistors applied to semiconductor packages. FEATURES
More informationPower Resistor for Mounting onto a Heatsink Thick Film Technology
DIMENSIONS in millimeters Power Resistor for Mounting onto a Heatsink Thick Film Technology FEATURES 300 W at 85 C bottom case temperature Wide resistance range: 0.3 Ω to 900 kω E24 series Non inductive
More informationAluminum Electrolytic Capacitors SMD (Chip), High Temperature, Low Impedance High Vibration Capability
Aluminum Electrolytic Capacitors SMD (Chip), High Temperature, Low Impedance High Vibration Capability FEATURES Useful life: up to 2000 h at 50 C High reliability Low ESR Polarized aluminum electrolytic
More informationSurface Mount Power Resistor Thick Film Technology
Surface Mount Power Resistor Thick Film Technology DESIGN SUPPORT TOOLS click logo to get started Models Available FEATURES AEC-Q200 qualified 35 W at 25 C case temperature Surface mounted resistor - TO-263
More informationPolyester Capacitors Filmite E, ORANGE DROP, Radial Lead
Polyester Capacitors Filmite E, ORANGE DROP, Radial ead PERFORMANCE CHARACTERITIC Operating Temperature: - 55 C to + 85 C To + 105 C when working voltage is reduced to 70 % of + 85 C rating; to + 125 C
More informationSurface Mount Multilayer Ceramic Chip Capacitors with Integrated Resistor for High Pulse Current Applications
Surface Mount Multilayer Ceramic Chip Capacitors with Integrated Resistor for High Pulse Current Applications FEATURES Integrated resistor on the surface of the Available capacitor Low electrostrictive
More information