Small Signal Fast Switching Diode

Transcription

1 Small Signal Fast Switching Diode MECHANICAL DATA Case: SOD- FL Weight: approx. 9. mg Packaging codes/options: 08/K per 7" reel (8 mm tape), 8K/box FEATURES Silicon epitaxial planar diode Fast switching diode Base P/N-G - green, commercial grade Material categorization: For definitions of compliance please see PARTS TABLE PART ORDERING CODE TYPE MARKING INTERNAL CONSTRUCTION REMARKS -08 AH Single diode Tape and reel ABSOLUTE MAXIMUM RATINGS (T amb = C, unless otherwise specified) PARAMETER TEST CONDITION SYMBOL VALUE UNIT Reverse voltage V R 7 V Repetitive peak reverse voltage V RRM 0 V Average rectified current half wave rectification with resistive load () f 0 Hz I F(AV) ma Surge forward current t < s and T j = C I FSM 00 ma Power dissipation () P tot 0 mw THERMAL CHARACTERISTICS (T amb = C, unless otherwise specified) PARAMETER TEST CONDITION SYMBOL VALUE UNIT Thermal resistance junction to ambient air () R thja 7 K/W Junction temperature T j Storage temperature T stg - 6 to + C Operating temperature range T op - to + Note () Device mounted on FR- PCB, landing pad according to footprint recommendation in datasheet drawing Rev..0., -Oct- Document Number: 8887

2 ELECTRICAL CHARACTERISTICS (T amb = C, unless otherwise specified) PARAMETER TEST CONDITION SYMBOL MIN. TYP. MAX. UNIT Forward voltage I F = ma V F 00 mv I F = 0 ma V F 0 mv V R = 0 V I R na Leakage current V R = 7 V I R μa V R = 0 V I R 0 μa V R = 0 V, T J = C I R 0 μa Diode capacitance V F = V R = 0 V C D pf Reverse recovery time I F = ma, I R = ma, V R = 6 V, R L = 0 t rr ns TYPICAL CHARACTERISTICS (T amb = C, unless otherwise specified) I F (ma) T j = 0 C T j = C V F (V) P tot - Power Dissipation (mw) T amb - Ambient Temperature ( C) Fig. - Forward Characteristics Fig. - Admissible Power Dissipation vs. Ambient Temperature T j = C f = khz. T j = C f = MHz.0 R f (Ω) C D (V R ) C D (0 V) I F (ma) V R (V) Fig. - Dynamic Forward Resistance vs. Forward Current Fig. - Relative Capacitance vs. Reverse Voltage Rev..0., -Oct- Document Number: 8887

3 I R (na) 7 0 V R = 0 V 0 00 T j ( C) Fig. - Leakage Current vs. Junction Temperature I FRM (A) 0 I n = t P /T T = /f P t P n = 0 T t t P (s) I FRM Fig. 6 - Admissible Repetitive Peak Forward Current vs. Pulse Duration Rev..0., -Oct- Document Number: 8887

4 PACKAGE DIMENSIONS in millimeters (inches): SOD-FL foot print recommendation:..8.0 [0.09] 0.8 [0.0] 0.7 [0.08] 0. [0.00].7 [0.6]. [0.098] 0.0 [0.008] 0.0 [0.00].7 [0.067]. [0.09] cathode bar.7 [0.6]. [0.0].86 Document no.:s8-v () Created - Date:.March Rev..0., -Oct- Document Number: 8887

5 Legal Disclaimer Notice Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, Vishay ), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer s technical experts. Product specifications do not expand or otherwise modify Vishay s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Revision: -Jun-6 Document Number: 900