MURD620CT. Ultrafast Rectifier. t rr = 25ns I F(AV) = 6Amp V R = 200V. Bulletin PD rev. C 12/03. Features. Package Outline

Transcription

1 MURD60CT Ultrafast Rectifier Features Ultrafast Recovery Time Low Forward Voltage Drop Low Leakage Current 75 C Operating Junction Temperature t rr = 5ns I F(AV) = 6Amp V R = 00V Description/ Applications International Rectifier's MUR.. series are the state of the art Ultra fast recovery rectifiers specifically designed with optimized performance of forward voltage drop and ultra fast recovery time. The planar structure and the platinum doped life time control, guarantee the best overall performance, ruggedness and reliability characteristics. These devices are intended for use in the output rectification stage of SMPS, UPS, DC-DC converters as well as free-wheeling diode in low voltage inverters and chopper motor drives. Their extremely optimized stored charge and low recovery current minimize the switching losses and reduce over dissipation in the switching element and snubbers. Package Outline D-PAK Absolute Maximum Ratings Parameters Max Units V RRM Peak Repetitive Peak Reverse Voltage 00 V I F(AV) Average Rectified Forward Current Per Device 6 A Total Device, (Rated V R ), T C = 46 C I FSM Non Repetitive Peak Surge Current 50 I FM Peak Repetitive Forward Current Per Diode 6 (Rated V R, Square wave, 0 KHz), T C = 46 C T J, T STG Operating Junction and Storage Temperatures - 65 to 75 C

2 Electrical T J = 5 C (unless otherwise specified) Parameters Min Typ Max Units Test Conditions V BR, V r Breakdown Voltage, V I R = 00µA Blocking Voltage V F Forward Voltage V I F = 3A V I F = 3A, T J = 5 C - -. V I F = 6A V I F = 6A, T J = 5 C I R Reverse Leakage Current µa V R = V R Rated µa T J = 5 C, V R = V R Rated C T Junction Capacitance - - pf V R = 00V L S Series Inductance nh Measured lead to lead 5mm. from package body Dynamic Recovery T J = 5 C (unless otherwise specified) Parameters Min Typ Max Units Test Conditions t rr Reverse Recovery Time ns I F =.0A, di F/dt = 50A/µs, V R = 30V I F = 0.5A, I R =.0A, I REC = 0.5A T J = 5 C 6 T J = 5 C I RRM Peak Recovery Current A T J = 5 C I F = 3A V R = 60V di F /dt = 00A/µs T J = 5 C Q rr Reverse Recovery Charge nc T J = 5 C T J = 5 C Thermal - Mechanical Characteristics Parameters Min Typ Max Units T J Max. Junction Temperature Range to 75 C T Stg Max. Storage Temperature Range to 75 R thjc Thermal Resistance, Junction to Case Per Leg C/ W R thja Thermal Resistance, Junction to Ambient Per Leg R thcs Thermal Resistance, Case to Heatsink Wt Weight g (oz) Mounting Torque Kg-cm lbf.in Mounting Surface, Flat, Smooth and Greased

3 Instantaneous Forward Current - I F (A) 00 0 T = 75 C J T = 50 C J T = 5 C J Reverse Current - I R (µa) Junction Capacitance - C T (pf) T = 75 C J 50 C 5 C 00 C 5 C Reverse Voltage - V R (V) Fig. - Typical Values Of Reverse Current Vs. Reverse Voltage 00 T = 5 C J Forward Voltage Drop - V FM (V) Fig. - Typical Forward Voltage Drop Characteristics Thermal Impedance Z thjc ( C/W) 0 D = 0.50 t, Rectangular Pulse Duration (Seconds) Fig. 4 - Max. Thermal Impedance Z thjc Characteristics Reverse Voltage - V R (V) Fig. 3 - Typical Junction Capacitance Vs. Reverse Voltage D = 0.0 D = 0.0 D = 0.05 D = 0.0 P DM D = 0.0 t 0. Single Pulse t (Thermal Resistance) Notes:. Duty factor D = t / t. Peak Tj = Pdm x ZthJC + Tc

4 Allowable Case Temperature ( C) Square wave (D = 0.50) Rated Vr applied DC see note () Average Forward Current - IF (AV) (A) Average Power Loss ( Watts ) RMS Limit D = 0.0 D = 0.0 D = 0.05 D = 0.0 D = 0.0 D = 0.50 DC Average Forward Current - IF (AV) (A) Fig. 5 - Max. Allowable Case Temperature Vs. Average Forward Current Fig. 6 - Forward Power Loss Characteristics IF = 3 A IF = 6 A 0 00 IF = 6 A IF = 3 A V R= 30V T J= 5 C T J= 5 C trr ( nc ) 30 Qrr ( nc ) V R= 30V T J = 5 C T J = 5 C di F /dt (A/µs ) di F /dt (A/µs ) Fig. 7 - Typical Reverse Recovery vs. di F /dt Fig. 8 - Typical Stored Charge vs. di F /dt () Formula used: T C = T J - (Pd + Pd REV ) x R thjc ; Pd = Forward Power Loss = I F(AV) x V (I F(AV) / D) (see Fig. 6); Pd REV = Inverse Power Loss = V R x I R ( - D); I V R = rated V R 4

5 Reverse Recovery Circuit V R = 00V 0.0 Ω dif/dt F /dt ADJUST L = 70µH G D IRFP50 D.U.T. S Fig. 9- Reverse Recovery Parameter Test Circuit 3 0 I F t a trr t b I RRM Q rr I RRM di(rec)m/dt I RRM di f F /dt. di F /dt - Rate of change of current through zero crossing. IRRM - Peak reverse recovery current 3. t rr - Reverse recovery time measured from zero crossing point of negative going I F to point where a line passing through 0.75 I RRM and 0.50 I RRM extrapolated to zero current 4. Q rr - Area under curve defined by t rr and I RRM Q rr = t rr x I RRM 5. di(rec)m/dt - Peak rate of change of current during tb portion of trr Fig. 0 - Reverse Recovery Waveform and Definitions 5

6 Outline Table 6.73 (0.6) 6.35 (0.5) 5.46 (0.) 5. (0.0) 4.7 (0.05) 0.88 (0.03).38 (0.09).9 (0.08).4 (0.04) 0.89 (0.03) 0.58 (0.0) 0.46 (0.0) MINIMUM RECOMMENDED FOOTPRINT 5.97 (0.4) 6.45 (0.4).64 (0.0) 3 6. (0.4) 5.97 (0.3) 0.4 (0.4) 9.40 (0.37) 5.68 (0.) 6.48 (0.6) 0.67 (0.4).5 (0.06).5 (0.04).4 (0.04) 0.76 (0.03) 0.89 (0.03) 3x 0.64 (0.0) 0.5 (0.0) MIN (0.0) 0.46 (0.0).54 (0.0).65 (0.06).8 (0.09).8 (0.09) 4.57 (0.8) - Anode - Cathode 3 - Anode 4 - Cathode BASE COMMON CATHODE 3 Conforms to JEDEC Outline D-PAK Dimensions in millimeters and (inches) ANODE COMMON ANODE CATHODE Tape & Reel Information TRR FEED DIRECTION TRL.60 (0.063).50 (0.059) 4.0 (0.6) 3.90 (0.53).85 (0.073).65 (0.065).60 (0.063) DIA..50 (0.059).60 (0.457).40 (0.449) 5.4 (0.609) 5. (0.60) (0.045) 0.34 (0.035) 4.30 (0.957) 3.90 (0.94).75 (0.069) DIA (0.49).5 (0.049) 0.70 (0.4) 6.0 (0.634) 5.90 (0.66) 4.7 (0.86) 4.5 (0.78) FEED DIRECTION 3.50 (0.53).80 (0.504) DIA (.039) 4.40 (0.96) 360 (4.73) DIA. MAX. 60 (.36) DIA. MIN. D-PAK Tape & Reel SMD-0 Tape & Reel When ordering, indicate the part number, part orientation, and the quantity. Quantities are in multiples of 800 pieces per reel for both TRL and TRR. When ordering, indicate the part number, part orientation and the quantity. Quantities are in multiples of 000 pieces per reel for TR and multiples of 3000 pieces per reel for both TRL and TRR. 6

7 Ordering Information Table Device Code MUR D 6 0 CT TRL Ultrafast MUR Series - D = D-Pak 3 - Current Rating (6 = 6A) 4 - Voltage Rating (0 = 00V) 5 - CT = Center Tap (Dual) 6 - Tape & Reel Suffix TR = Tape & Reel TRL = Tape & Reel (Left Oriented) TRR = Tape & Reel (Right Oriented) Data and specifications subject to change without notice. This product has been designed and qualified for Industrial Level. Qualification Standards can be found on IR's Web site. IR WORLD HEADQUARTERS: 33 Kansas St., El Segundo, California 9045, USA Tel: (30) TAC Fax: (30) /03 7

8 Legal Disclaimer Notice Vishay Notice The products described herein were acquired by Vishay Intertechnology, Inc., as part of its acquisition of International Rectifier s Power Control Systems (PCS) business, which closed in April 007. Specifications of the products displayed herein are pending review by Vishay and are subject to the terms and conditions shown below. Specifications of the products displayed herein are subject to change without notice. Vishay Intertechnology, Inc., or anyone on its behalf, assumes no responsibility or liability for any errors or inaccuracies. Information contained herein is intended to provide a product description only. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document. Except as provided in Vishay's terms and conditions of sale for such products, Vishay assumes no liability whatsoever, and disclaims any express or implied warranty, relating to sale and/or use of Vishay products including liability or warranties relating to fitness for a particular purpose, merchantability, or infringement of any patent, copyright, or other intellectual property right. The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications. Customers using or selling these products for use in such applications do so at their own risk and agree to fully indemnify Vishay for any damages resulting from such improper use or sale. Document Number: 9990 Revision: 08-Mar-07