SFH615A/SFH6156. Optocoupler, Phototransistor Output, High Reliability, 5300 V RMS. Vishay Semiconductors
|
|
- Gertrude Jacobs
- 5 years ago
- Views:
Transcription
1 Optocoupler, Phototransistor Output, High Reliability, 300 V RMS Features Excellent CTR Linearity Depending on Forward Current Isolation Test Voltage, 300 V RMS e3 Fast Switching Times Low CTR Degradation Low Coupling Capacitance Lead (Pb)-free component Component in accordance to RoHS 2002/9/EC and WEEE 2002/96/EC A 1 C 2 4 C 3 E 1 Agency Approvals UL177, File No. E2744 System Code H or J, Double Protection DIN EN (VDE0884) DIN EN pending Available with Option 1 Applications Switchmode power supply Telecom Battery powered equipment Description The SFH61A (DIP) and SFH616 (SMD) feature a variety of transfer ratios, low coupling capacitance and high isolation voltage. These couplers have a GaAs infrared diode emitter, which is optically coupled to a silicon planar phototransistor detector, and is incorporated in a plastic DIP-4 or SMD package. The coupling devices are designed for signal transmission between two electrically separated circuits. The couplers are end-stackable with 2.4 mm lead spacing. Creepage and clearance distances of > 8.0 mm are achieved with option 6. This version complies with IEC 6090 (DIN VDE 080) for reinforced insulation up to an operation voltage of 400 V RMS or DC. Specifications subject to change. Order Information Part Remarks SFH61A-1 CTR %, DIP-4 SFH61A-2 CTR %, DIP-4 SFH61A-3 CTR %, DIP-4 SFH61A-4 CTR %, DIP-4 SFH616-1 CTR %, SMD-4 SFH616-2 CTR %, SMD-4 SFH616-3 CTR %, SMD-4 SFH616-4 CTR %, SMD-4 SFH61A-1X006 CTR %, DIP mil (option 6) SFH61A-1X007 CTR %, SMD-4 (option 7) SFH61A-2X006 CTR %, DIP mil (option 6) SFH61A-2X007 CTR %, SMD-4 (option 7) SFH61A-2X009 CTR %, SMD-4 (option 9) SFH61A-3X006 CTR %, DIP mil (option 6) SFH61A-3X007 CTR %, SMD-4 (option 7) SFH61A-3X008 CTR %, SMD-4 (option 8) SFH61A-3X009 CTR %, SMD-4 (option 9) SFH61A-4X006 CTR %, DIP mil (option 6) SFH61A-4X007 CTR %, SMD-4 (option 7) SFH61A-4X008 CTR %, SMD-4 (option 8) SFH61A-4X009 CTR %, SMD-4 (option 9) For additional information on the available options refer to Option Information. See TAPE AND REEL Section for 4-pin optocouplers T0 with 90 rotation. 1
2 Absolute Maximum Ratings T amb = 2 C, unless otherwise specified Stresses in excess of the absolute Maximum Ratings can cause permanent damage to the device. Functional operation of the device is not implied at these or any other conditions in excess of those given in the operational sections of this document. Exposure to absolute Maximum Rating for extended periods of the time can adversely affect reliability. Input Parameter Test condition Symbol Value Unit Reverse voltage V R 6.0 V DC Forward current 60 ma Surge forward current t p 10 µs SM 2. A Output Parameter Test condition Symbol Value Unit Collector-emitter voltage V CE 70 V Emitter-collector voltage V CEO 7.0 V Collector current I C 0 ma t p 1.0 ms I C 100 ma Coupler Parameter Test condition Symbol Value Unit Isolation test voltage (between emitter and detector, refered to climate DIN 40046, part 2, Nov. 74 t = 1.0 s V ISO 300 V RMS Creepage 7.0 mm Clearance 7.0 mm Insulation thickness between 0.4 mm emitter and detector Comparative tracking index per 17 DIN IEC 112/VDE 0303, part 1 Isolation resistance V IO = 00 V, T amb = 2 C R IO Ω V IO = 00 V, T amb = 100 C R IO Ω Storage temperature range T stg - to + 10 C Ambient temperature range T amb - to C Soldering temperature max. 10 s, Dip soldering distance to seating plane 1. mm T sld 260 C 200 P tot - Power Dissipation (mw) Diode Phototransistor T amb - Ambient Temperature ( C) Figure 1. Permissible Power Dissipation vs. Ambient Temperature 2
3 Thermal Characteristics The thermal model is represented in the thermal network below. Each resistance value given in this model can be used to calculate the temperatures at each node for a given operating condition. The thermal resistance from board to ambient will be dependent on the type of PCB, layout and thickness of copper traces. For a detailed explanation of the thermal model, please reference Vishay's Thermal Characteristics of Optocouplers Application note. Parameter Test condition Symbol Value Unit LED Power dissipation at 2 C P diss 100 mw Output Power dissipation at 2 C P diss 10 mw Maximum LED junction temperature T jmax 12 C Maximum output die junction temperature T jmax 12 C Thermal resistance, Junction Emitter to Board θ EB 173 C/W Thermal resistance, Junction Emitter to Case θ EC 149 C/W Thermal resistance, Junction Detector to Board θ DB 111 C/W Thermal resistance, Junction Detector to Case θ DC 127 C/W Thermal resistance, Junction Emitter to Junction Detector θ ED 9 C/W Thermal resistance, Board to Ambient* θ BA 19 C/W Thermal resistance, Case to Ambient* θ CA 373 C/W * For 2 layer FR4 board (4" x 3" x 0.062) T A θ CA T C Package θ DC θ EC T JD θ DE T JE θ DB θ EB T B θ BA T A 3
4 Electrical Characteristics T amb = 2 C, unless otherwise specified Minimum and maximum values are testing requirements. Typical values are characteristics of the device and are the result of engineering evaluation. Typical values are for information only and are not part of the testing requirements. Input Parameter Test condition Symbol Min Typ. Max Unit Forward voltage = 60 ma V F V Reverse current V R = 6.0 V I R µa Capacitance V R = 0 V, f = 1.0 MHz C O 13 pf Output Parameter Test condition Part Symbol Min Typ. Max Unit Collector-emitter capacitance V CE =.0 V, f = 1.0 MHz C CE.2 pf Collector-emitter leakage current V CE = 10 V SFH61A-1 SFH616-1 SFH61A-2 SFH616-2 SFH61A-3 SFH616-3 SFH61A-4 SFH616-4 I CEO na I CEO na I CEO na I CEO na Coupler Parameter Test condition Symbol Min Typ. Max Unit Collector-emitter saturation = 10 ma, I C = 2. ma V CEsat V voltage Coupling capacitance C C 0.4 pf Current Transfer Ratio I C / Parameter Test condition Part Symbol Min Typ. Max Unit = 10 ma, V CE =.0 V = 1.0 ma, V CE =.0 V SFH61A-1 SFH616-1 SFH61A-2 SFH616-2 SFH61A-3 SFH616-3 SFH61A-4 SFH616-4 SFH61A-1 SFH616-1 SFH61A-2 SFH616-2 SFH61A-3 SFH616-3 SFH61A-4 SFH616-4 CTR % CTR % CTR % CTR % CTR % CTR 22 4 % CTR % CTR 6 90 % 4
5 Switching Characteristics Switching Non-saturated Switching Saturated SFH61A/SFH616 Parameter Test condition Symbol Min Typ. Max Unit Rise Time = 10 ma, V CC =.0 V, T A = 2 C, R L = 7 Ω t r 2.0 µs Fall Time = 10 ma, V CC =.0 V, T A = 2 C, R L = 7 Ω t f 2.0 µs Turn-on time = 10 ma, V CC =.0 V, T A = 2 C, R L = 7 Ω t on 3.0 µs Turn-off time = 10 ma, V CC =.0 V, T A = 2 C, R L = 7 Ω t off 2.3 µs Cut-off frequency = 10 ma, V CC =.0 V, T A = 2 C, R L = 7 Ω f ctr 20 khz Parameter Test condition Part Symbol Min Typ. Max Unit Rise time V CC =.0 V, T A = 2 C, R L = 1 kω, = 20 ma SFH61A-1 t r 2.0 µs SFH616-1 V CC =.0 V, T A = 2 C, R L = 1 kω, = 10 ma SFH61A-2 t r 3.0 µs SFH616-2 SFH61A-3 t r 3.0 µs SFH616-3 V CC =.0 V, T A = 2 C, R L = 1 kω, =.0 ma SFH61A-4 t r 4.6 µs SFH616-4 Fall time V CC =.0 V, T A = 2 C, R L = 1 kω, = 20 ma SFH61A-1 t f 11 µs SFH616-1 V CC =.0 V, T A = 2 C, R L = 1 kω, = 10 ma SFH61A-2 t f 14 µs SFH616-2 SFH61A-3 t f 14 µs SFH616-3 V CC =.0 V, T A = 2 C, R L = 1 kω, =.0 ma SFH61A-4 t f 1 µs SFH616-4 Turn-on time V CC =.0 V, T A = 2 C, R L = 1 kω, = 20 ma SFH61A-1 t on 3.0 µs SFH616-1 V CC =.0 V, T A = 2 C, R L = 1 kω, = 10 ma SFH61A-2 t on 4.2 µs SFH616-2 SFH61A-3 t on 4.2 µs SFH616-3 V CC =.0 V, T A = 2 C, R L = 1 kω, =.0 ma SFH61A-4 t on 6.0 µs SFH616-4 Turn-off time V CC =.0 V, T A = 2 C, R L = 1 kω, = 20 ma SFH61A-1 t off 18 µs SFH616-1 V CC =.0 V, T A = 2 C, R L = 1 kω, = 10 ma SFH61A-2 t off 23 µs SFH616-2 SFH61A-3 t off 23 µs SFH616-3 V CC =.0 V, T A = 2 C, R L = 1 kω, =.0 ma SFH61A-4 SFH616-4 t off 2 µs
6 Typical Characteristics T amb = 2 C, unless otherwise specified 30 R L =7Ω I C V CC =V I C ma 20 =14 ma 12 ma 10 ma 8.0 ma isfh61a_01 47 Ω Figure 2. Linear Operation (without Saturation) isfh61a_ ma 6.0 ma 4.0 ma 2.0 ma V 1 V CE Figure. Output Characteristics (typ.) Collector Current vs. Collector-Emitter Voltage Ω V CC =V V F V Ω isfh61a_ ma 10 2 isfh61a_0 Figure 3. Switching Operation (with Saturation) Figure 6. Diode Forward Voltage (typ.) vs. Forward Current I C 10 3 % 10 2 =10mA,V CE =.0 V C 20 pf 1 10 f = 1.0 MHz C CE isfh61a_ C 7 T A Figure 4. Current Transfer Ratio (typical) vs. Temperature isfh61a_ V 10 2 V e Figure 7. Transistor Capacitance (typ.) vs. Collector-Emitter Voltage 6
7 10 4 ma 10 3 D = D= t p T t p T isfh61a_ DC Pulse cycle D = parameter s 10 1 t p Figure 8. Permissible Pulse Handling Capability Forward Current vs. Pulse Width Package Dimensions in Inches (mm) 2 1 pin one ID 0.2 (6.48) (6.81) ISO Method A (0.76) 0.04 (1.14) (4.) (4.83) (0.79) typ (1.27) typ (7.62) typ. i typ (0.46) (0.6) (3.30) 0.10 (3.81) (0.08) 0.03 (0.89) 0.00 (1.27) (2.4) (0.20) (0.30) (2.79) (3.30) (.84) 0.20 (6.3) 7
8 Package Dimensions in Inches (mm) SMD 0.2 (6.48) (6.81) pin one ID (2.4) R (0.2) (0.76) (1.78) 0.31 (8.00) min (1.2) 0.43 (11.0) ISO Method A i178029_ (0.76) 0.04 (1.14) 4 typ (2.4) typ (1.27) typ (4.) (4.83) (0.79) typ (3.30) 0.10 (3.81) 0.37 (9.2) 0.39 (10.03) (7.2) (7.90) (8.00) (0.249) min (0.102) Lead (0.08) coplanarity (1.02) max (0.2) typ (0.102) (0.249) Option (9.3) 0.39 (10.03) (7.62) ref (0.1) (1.02) 0.31 (8.00) min (0.30) typ. 1 max. 8
9 Ozone Depleting Substances Policy Statement It is the policy of Vishay Semiconductor GmbH to 1. Meet all present and future national and international statutory requirements. 2. Regularly and continuously improve the performance of our products, processes, distribution and operating systems with respect to their impact on the health and safety of our employees and the public, as well as their impact on the environment. It is particular concern to control or eliminate releases of those substances into the atmosphere which are known as ozone depleting substances (ODSs). The Montreal Protocol (1987) and its London Amendments (1990) intend to severely restrict the use of ODSs and forbid their use within the next ten years. Various national and international initiatives are pressing for an earlier ban on these substances. Vishay Semiconductor GmbH has been able to use its policy of continuous improvements to eliminate the use of ODSs listed in the following documents. 1. Annex A, B and list of transitional substances of the Montreal Protocol and the London Amendments respectively 2. Class I and II ozone depleting substances in the Clean Air Act Amendments of 1990 by the Environmental Protection Agency (EPA) in the USA 3. Council Decision 88/40/EEC and 91/690/EEC Annex A, B and C (transitional substances) respectively. Vishay Semiconductor GmbH can certify that our semiconductors are not manufactured with ozone depleting substances and do not contain such substances. We reserve the right to make changes to improve technical design and may do so without further notice. Parameters can vary in different applications. All operating parameters must be validated for each customer application by the customer. Should the buyer use products for any unintended or unauthorized application, the buyer shall indemnify against all claims, costs, damages, and expenses, arising out of, directly or indirectly, any claim of personal damage, injury or death associated with such unintended or unauthorized use. Vishay Semiconductor GmbH, P.O.B. 33, D-7402 Heilbronn, Germany 9
10 Notice Legal Disclaimer Notice Vishay Specifications of the products displayed herein are subject to change without notice. Vishay Intertechnology, Inc., or anyone on its behalf, assumes no responsibility or liability for any errors or inaccuracies. Information contained herein is intended to provide a product description only. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document. Except as provided in Vishay's terms and conditions of sale for such products, Vishay assumes no liability whatsoever, and disclaims any express or implied warranty, relating to sale and/or use of Vishay products including liability or warranties relating to fitness for a particular purpose, merchantability, or infringement of any patent, copyright, or other intellectual property right. The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications. Customers using or selling these products for use in such applications do so at their own risk and agree to fully indemnify Vishay for any damages resulting from such improper use or sale. Document Number: Revision: 08-Apr-0 1
SFH615A / SFH6156. Pb Pb-free. Optocoupler, High Reliability, 5300 V RMS VISHAY. Vishay Semiconductors
SFH6A / SFH66 Optocoupler, High Reliability, 300 V RMS Features Excellent CTR Linearity Depending on Forward Current Isolation Test Voltage, 300 V RMS Fast Switching Times Low CTR Degradation Low Coupling
More informationCNY17F-4. Pb Pb-free. Optocoupler, Phototransistor Output, No Base Connection. Vishay Semiconductors
Optocoupler, Phototransistor Output, No Base Connection Features Breakdown Voltage, 500 V RMS No Base Terminal Connection for Improved Common Mode Interface Immunity Long Term Stability Industry Standard
More informationSFH612A/ SFH655A. Pb Pb-free. Optocoupler, Photodarlington Output. Vishay Semiconductors
Optocoupler, Photodarlington Output Features High Isolation Test Voltage 5300 V RMS Standard Plastic DIP-4 Package Lead-free component Component in accordance to RoHS 2002/95/EC and WEEE 2002/96/EC A 1
More informationParameter Test condition Symbol Value Unit Junction ambient 1) R thja 300 K/W
Silicon NPN Planar RF Transistor Features High power gain Low noise figure Lead (Pb)-free component Component in accordance to RoHS 00/95/EC and WEEE 00/96/EC e E B C Applications RF amplifier up to GHz
More informationBAV17/18/19/20/21. Small Signal Switching Diodes, High Voltage. Vishay Semiconductors
Small Signal Switching Diodes, High Voltage BAV7/8/9/20/2 Features Silicon Epitaxial Planar Diodes Lead (Pb)-free component Component in accordance to RoHS 2002/95/EC and WEEE 2002/96/EC e2 Applications
More informationOptocoupler, Phototransistor Output, with Base Connection
FEATURES A 6 B Current transfer ratio (see order information) C 2 5 C Isolation test voltage 5300 V RMS Lead (Pb)-free component NC 3 4 E Component in accordance to RoHS 2002/95/EC and WEEE 2002/96/EC
More information4N35/ 4N36/ 4N37/ 4N38
Optocoupler, Phototransistor Output, With Base Connection Features Isolation Test Voltage 5300 V RMS Interfaces with common logic families Input-output coupling capacitance < pf Industry Standard Dual-in
More informationLL4148 / LL4448. Small Signal Fast Switching Diodes. Vishay Semiconductors
Small Signal Fast Switching Diodes Features Silicon Epitaxial Planar Diodes Electrical data identical with the devices e2 N448 and N4448 respectively Lead (Pb)-free component Component in acc. to RoHS
More information4N25/ 4N26/ 4N27/ 4N28
Optocoupler, Phototransistor Output, With Base Connection Features Isolation Test Voltage 5300 V RMS Interfaces with Common Logic Families Input-output Coupling Capacitance < pf Industry Standard Dual-in-line
More informationPart Ordering code Type Marking Remarks BAT46 BAT46-TR or BAT46-TAP BAT46 Tape and Reel/Ammopack
Small Signal Schottky Diode Features For general purpose applications. This diode features very low turn-on voltage and fast switching. This device is pro- e2 tected by a PN junction guard ring against
More informationILD620/ 620GB / ILQ620/ 620GB
Optocoupler, Phototransistor Output, AC Input (Dual, Quad Channel) Features Identical Channel to Channel Footprint ILD620 Crosses to TLP620-2 ILQ620 Crosses to TLP620-4 High Collector-Emitter Voltage,
More informationPart Ordering code Marking Remarks 1N4148W-V 1N4148W-V-GS18 or 1N4148W-V-GS08 A2 Tape and Reel
N8W-V Small Signal Fast Switching Diode Features These diodes are also available in other case styles including the DO case with the type designation N8, the e MiniMELF case with the type designation LL8,
More informationMOC8101, MOC8102, MOC8103, MOC8104, MOC8105 Optocoupler, Phototransistor Output, no Base Connection
MOC80, MOC80, MOC803, MOC80, MOC80 Optocoupler, Phototransistor Output, no Base Connection i79009- DESCRIPTION The MOC80, MOC80, MOC803, MOC80, MOC80 family optocoupler consisting of a gallium arsenide
More informationLH1522AB/ AAC/ AACTR. Pb Pb-free. Dual 1 Form A Solid State Relay. Vishay Semiconductors
Dual 1 Form A Solid State Relay Features Dual Channel (LH151) Current Limit Protection Isolation Test Voltage 53 V RMS Typical R ON 1 Ω Load Voltage 2 V Load Current 12 ma High Surge Capability Clean Bounce
More informationBYW52 / 53 / 54 / 55 / 56
Standard Avalanche Sinterglass Diode BYW52 / 53 / 54 / 55 / 56 Features Controlled avalanche characteristics Glass passivated junction Hermetically sealed package Low reverse current High surge current
More informationOptocoupler, Phototransistor Output, no Base Connection
Optocoupler, Phototransistor Output, no Base Connection FEATURES A C NC 1 2 3 6 5 4 NC C E Isolation test voltage, 5 V RMS No base terminal connection for improved common mode interface immunity Long term
More informationMultichannel Optocoupler with Phototransistor Output
Multichannel Optocoupler with Phototransistor Output Description The CNY74-2H and CNY74-4H consist of a phototransistor optically coupled to a gallium arsenide infrared-emitting diode in an 8-lead, resp.
More informationBAV100/101/102/103. Small Signal Switching Diodes, High Voltage. Vishay Semiconductors
Small Signal Switching Diodes, High Voltage BAV/0/02/03 Features Silicon Epitaxial Planar Diodes Lead (Pb)-free component Component in accordance to RoHS 2002/95/EC and WEEE 2002/96/EC e2 Applications
More informationPart Ordering code Type Marking Remarks 1N4148 1N4148-TAP or 1N4148-TR V4148 Ammopack/tape and reel
Small Signal Fast Switching Diodes Features Silicon epitaxial planar diodes Electrically equivalent diodes: e2 N448 - N94 Lead (Pb)-free component Component in accordance to RoHS 2002/95/EC and WEEE 2002/96/EC
More informationSubminiature Transmissive Optical Sensor with Phototransistor Output, RoHS Compliant, Released for Lead (Pb)-free Solder Process
TCPT12 Subminiature Transmissive Optical Sensor with Phototransistor Output, RoHS Compliant, Released for Lead (Pb)-free Solder Process Description The TCPT12 is a compact transmissive sensor that includes
More informationPart Ordering code Type Marking Remarks LL42 LL42-GS18 or LL42-GS08 - Tape and Reel LL43 LL43-GS18 or LL43-GS08 - Tape and Reel
Small Signal Schottky Diodes Features For general purpose applications These diodes feature very low turn-on voltage and fast switching. e2 These devices are protected by a PN junction guard ring against
More informationLL4148 / LL4448. Small Signal Fast Switching Diodes. Vishay Semiconductors
Small Signal Fast Switching Diodes Features Silicon Epitaxial Planar Diodes Electrical data identical with the devices e2 N448 and N4448 respectively Lead (Pb)-free component Component in acc. to RoHS
More informationBAV300 / 301 / 302 / 303
Small Signal Switching Diodes, High Voltage BAV300 / 30 / 302 / 303 Features Silicon Epitaxial Planar Diodes Saving space e2 Hermetic sealed parts Fits onto SOD323 / SOT23 footprints Electrical data identical
More informationOptocoupler, Phototransistor Output, with Base Connection
Vishay Semiconductors Optocoupler, Phototransistor Output, FEATURES A 6 B Isolation test voltage 5300 V RMS Interfaces with common logic families C NC 2 3 V D E 5 4 C E Input-output coupling capacitance
More informationTCLT10.. Series. Optocoupler with Phototransistor Output. Vishay Semiconductors. Description. Applications. VDE Standards
Optocoupler with Phototransistor Output Description The TCLT1.. Series consists of a phototransistor optically coupled to a gallium arsenide infraredemitting diode in a 4-lead SO6L package. The elements
More informationParameter Test condition Symbol Value Unit Junction to ambient air on PC board. R thja 500 K/W 50 mm x 50 mm x 1.6 mm
Small Signal Zener Diodes Features Very sharp reverse characteristic Low reverse current level e2 Available with tighter tolerances Very high stability Low noise Lead (Pb)-free component Component in accordance
More informationTransmissive Optical Sensor without Aperture
TCST/ TCST2 Transmissive Optical Sensor without Aperture Description This device has a compact construction where the emitting-light sources and the detectors are located face-to-face on the same optical
More informationTransmissive Optical Sensor with Phototransistor Output
TCST11. up to TCST23. Transmissive Optical Sensor with Phototransistor Output Description This device has a compact construction where the emitting-light sources and the detectors are located face-to-face
More informationParameter Test condition Symbol Value Unit Zener current (see Table "Electrical Characteristics") Power dissipation P tot 1.3
Zener Diodes Features Silicon Planar Power Zener Diodes For use in stabilizing and clipping circuits with high power rating e The Zener voltages are graded according to the international E standard. Replace
More informationLH1532AAC/ AACTR/ AB. Pb Pb-free. Dual 1 Form A Solid State Relay. Vishay Semiconductors
Dual 1 Form A Solid State Relay Features Dual Channel (LH15) Current Limit Protection Isolation Test Voltage 53 V RMS Typical R ON Ω Load Voltage 35 V High Surge Capability Clean Bounce Free Switching
More informationTEMD5020. Silicon PIN Photodiode. Vishay Semiconductors
TEMD52 Silicon PIN Photodiode Description TEMD52 is a high speed and high sensitive PIN photodiode. It is a miniature Surface Mount Device (SMD) including the chip with a 4.4 mm 2 sensitive area, detecting
More informationOptocoupler with Transistor Output
Optocoupler with Transistor Output 17197_4 DESCRIPTION The HS817 series consists of a phototransistor optically coupled to a gallium arsenide infrared-emitting diode in a 4-lead plastic dual inline package.
More informationOptocoupler, Phototransistor Output, with Base Connection
Vishay Semiconductors Optocoupler, Phototransistor Output, 2842 DESCRIPTION i79004-4 Each optocoupler consists of gallium arsenide infrared LED and a silicon NPN phototransistor. AGENCY APPROVALS Underwriters
More informationOptocoupler, Photodarlington Output, High Gain, With Base Connection
End of Life January-208 - Alternative Device: CNY7 HB, HB2, HB3 Optocoupler, Photodarlington Output, High Gain, With Base Connection FEATURES A C NC 2 3 6 5 4 B C E Isolation test voltage: 4420 V RMS Coupling
More informationTCET110.(G) up to TCET4100. Optocoupler with Phototransistor Output. Vishay Telefunken. Description. Applications. VDE Standards
Optocoupler with Phototransistor Output Description The TCET11./ TCET2/ TCET4 consists of a phototransistor optically coupled to a gallium arsenide infrared-emitting diode in a 4-lead up to 16-lead plastic
More informationReflective Optical Sensor with Transistor Output
Reflective Optical Sensor with Transistor Output Description The has a compact construction where the emitting light source and the detector are arranged in the same direction to sense the presence of
More informationOptocoupler, Phototransistor Output, LSOP-4, 110 C Rated, Long Mini-Flat Package
TCLT11. Series Optocoupler, Phototransistor Output, LSOP-4, 11 C Rated, Long Mini-Flat Package 17295-5 DESCRIPTION The TCLT11. series consists of a phototransistor optically coupled to a gallium arsenide
More informationPart Type differentiation Package 1N5550 V RRM = 200 V G-4 1N5551 V RRM = 400 V G-4 1N5552 V RRM = 600 V G-4
VISHAY 1N5550 to 1N5552 Standard Sinterglass Diode Features Cavity-free glass passivated junction High temperature metallurgically bonded construction Hermetically sealed package Medium switching for improved
More informationBYT52. Fast Avalanche Sinterglass Diode. Vishay Semiconductors
Fast Avalanche Sinterglass Diode Features Glass passivated junction Hermetically sealed package Low reverse current Soft recovery characteristics Lead (Pb)-free component Component in accordance to RoHS
More informationTSUS540. Infrared Emitting Diode, 950 nm, GaAs VISHAY. Vishay Semiconductors
VISHAY TSUS54. Infrared Emitting Diode, 95 nm, GaAs Description TSUS54. series are infrared emitting diodes in standard GaAs on GaAs technology, molded in a clear, blue-grey tinted plastic package. The
More informationBFS17/BFS17R/BFS17W. Silicon NPN Planar RF Transistor. Vishay Telefunken. Applications. Features
Silicon NPN Planar RF Transistor BFS17/BFS17R/BFS17W Electrostatic sensitive device. Observe precautions for handling. Applications For broadband amplifiers up to 1 GHz. Features High power gain SMD-package
More informationRF amplifier up to GHz range specially for wide band antenna amplifier.
Silicon NPN Planar RF Transistor BFR91A Electrostatic sensitive device. Observe precautions for handling. Applications RF amplifier up to GHz range specially for wide band antenna amplifier. Features High
More informationOptocoupler, Phototransistor Output, Single Channel, Half Pitch Mini-Flat Package
TCMT11. Series Optocoupler, Phototransistor Output, Single Channel, Half Pitch Mini-Flat Package 22628-1 C E 4 3 1 2 DESCRIPTION The TCMT11. series consist of a phototransistor optically coupled to a gallium
More informationTLWR9.2. TELUX. Vishay Semiconductors
TELUX Description The TELUX series is a clear, non diffused LED for applications where supreme luminous flux is required. It is designed in an industry standard 7.62 mm square package utilizing highly
More informationParameter Test Conditions Symbol Value Unit Junction ambient on glass fibre printed board (40 x 25 x 1.5) mm 3 plated with 35m Cu
Silicon NPN Planar RF Transistor BFR96TS Electrostatic sensitive device. Observe precautions for handling. Applications RF amplifier up to GHz range specially for wide band antenna amplifier. Features
More informationRF amplifier up to GHz range specially for wide band antenna amplifier.
Silicon NPN Planar RF Transistor BFR91 Electrostatic sensitive device. Observe precautions for handling. Applications RF amplifier up to GHz range specially for wide band antenna amplifier. Features High
More informationILD1/ 2/ 5 / ILQ1/ 2/ 5
ILD/ 2/ 5 / ILQ/ 2/ 5 Optocoupler, Phototransistor Output (Dual, Quad hannel) Features urrent Transfer Ratio at I F = 0 m Isolation Test Voltage, 5300 V RMS Lead-free component omponent in accordance to
More informationParameter Test Conditions Symbol Value Unit Junction ambient on glass fibre printed board (25 x 20 x 1.5) mm 3 R thja 450 K/W plated with 35m Cu
Silicon NPN Planar RF Transistor BFR92 Electrostatic sensitive device. Observe precautions for handling. Applications RF amplifier up to GHz range specially for wide band antenna amplifier. Features High
More informationBC546 / 547 / 548. Small Signal Transistors (NPN) Vishay Semiconductors
Small Signal Transistors (NPN) Features NPN Silicon Epitaxial Planar Transistors These transistors are subdivided into three groups A, B, and C according to their current gain. The type BC546 is available
More informationSubminiature Transmissive Optical Sensor with Phototransistor Output
Subminiature Transmissive Optical Sensor with Phototransistor Output Description This device has a compact construction where the emitting light source and the detector is located face to face on the same
More informationBFQ65. Silicon NPN Planar RF Transistor. Applications. Features. Absolute Maximum Ratings. Maximum Thermal Resistance
Silicon NPN Planar R Transistor Applications R-amplifier up to GHz range specially for wide band antenna amplifier. Electrostatic sensitive device. Observe precautions for handling. eatures High power
More informationBPW82. Silicon PIN Photodiode. Vishay Telefunken. Description. Features. Applications High speed photo detector. Absolute Maximum Ratings
Silicon PIN Photodiode BPW82 Description BPW82 is a high speed and high sensitive PIN photodiode in a flat side view plastic package. The epoxy package itself is an IR filter, spectrally matched to GaAs
More informationGaAs Infrared Emitting Diodes in ø 5 mm (T 1) Package
GaAs Infrared Emitting Diodes in ø 5 mm (T 1) Package TSUS54. Description TSUS54. series are infrared emitting diodes in standard GaAs on GaAs technology, molded in a clear, blue grey tinted plastic package.
More informationAbsolute Maximum Ratings T amb = 25 C, unless otherwise specified Parameter Test condition Symbol Value Unit Power dissipation P tot 300 1) mw
DZ-V-Series Small Signal Zener Diodes, Dual Features These diodes are available in other case styles and configurations including: the dual diode common anode configuration e with type designation AZ,
More informatione3 Pb TLMK310. High Intensity SMD LED VISHAY Vishay Semiconductors
High Intensity SMD LED Description This device has been designed to meet the increasing demand for AlInGaP technology. The package of the is the PLCC-2 (equivalent to a size B tantalum capacitor). It consists
More informationBPW34. Silicon PIN Photodiode. Vishay Telefunken. Description. Features. Applications High speed photo detector. Absolute Maximum Ratings
Silicon PIN Photodiode BPW34 Description The BPW34 is a high speed and high sensitive PIN photodiode in a miniature flat plastic package. Its top view construction makes it ideal as a low cost replacement
More informationBYW52 / 53 / 54 / 55 / 56
Standard Avalanche Sinterglass Diode Features Controlled avalanche characteristics Glass passivated junction Hermetically sealed package Low reverse current High surge current loading Applications Rectification,
More informationOptocoupler, Phototransistor Output, Dual Channel
Optocoupler, Phototransistor Output, Dual ILD6 Vishay Semiconductors FEATURES Dual version of SFH6 series i79073_7 A A 2 3 4 8 7 6 5 E E Isolation test voltage, 5300 V RMS V Esat 0.25 ( 0.4) V at I F =
More informationBPW24R. Silicon PIN Photodiode. Vishay Telefunken. Description. Features. Applications High speed photo detector. Absolute Maximum Ratings
Silicon PIN Photodiode BPW24R Description BPW24R is a high sensitive silicon planar photodiode in a standard TO 18 hermetically sealed metal case with a glass lens. A precise alignment of the chip gives
More informationTEMD5000. Silicon PIN Photodiode. Vishay Semiconductors. Description. Features. Applications High speed photo detector. Absolute Maximum Ratings
Silicon PIN Photodiode TEMD5000 Description TEMD5000 is a high speed and high sensitive PIN photodiode in a miniature flat plastic package. Its top view construction makes it ideal as a low cost replacement
More informatione3 Pb TLMO / S / Y300. Low Current SMD LED VISHAY Vishay Semiconductors
VISHAY TLMO / S / Y3. Low Current SMD LED Description These new devices have been designed to meet the increasing demand for AllnGaP based low current SMD LEDs. The package of the TLM.3. is the PLCC-2
More informationBPW20RF. Silicon PN Photodiode. Vishay Semiconductors. Description. Features. Applications. Absolute Maximum Ratings
Silicon PN Photodiode Description BPW20RF is a planar Silicon PN photodiode in a hermetically sealed short TO 5 case, especially designed for high precision linear applications. Due to its extremely high
More informationParameter Test condition Symbol Value Unit Junction ambient l = 4 mm, T L = constant R thja 300 K/W
ener Diodes Features Very sharp reverse characteristic Low reverse current level Very high stability Low noise Available with tighter tolerances Applications Voltage stabilization 94 9367 Mechanical Data
More informationN-Channel Dual Gate MOS-Fieldeffect Tetrode, Depletion Mode
VISHAY BF9 N-Channel Dual Gate MOS-Fieldeffect Tetrode, Depletion Mode Features Integrated gate protection diodes High cross modulation performance Low noise figure High gain High AGC-range Low feedback
More informationLow Current 13 mm Seven Segment Display
Low Current 13 mm Seven Segment Display TDSL51. Color Type Circuitry High efficiency red TDSL515 Common anode High efficiency red TDSL516 Common cathode Description The TDSL51. series are 13 mm character
More informationN-Channel Dual Gate MOS-Fieldeffect Tetrode, Depletion Mode
BF91 N-Channel Dual Gate MOS-Fieldeffect Tetrode, Depletion Mode Features Integrated gate protection diodes High cross modulation performance Low noise figure High AGC-range Low feedback capacitance Low
More informationBPW24R. Silicon PIN Photodiode. Vishay Telefunken. Description. Features. Applications High speed photo detector. Absolute Maximum Ratings
Silicon PIN Photodiode BPW24R Description BPW24R is a high sensitive silicon planar photodiode in a standard TO 18 hermetically sealed metal case with a glass lens. A precise alignment of the chip gives
More informatione3 Pb TLRG / H / O / P / Y440. Resistor LED for 12 V Supply Voltage VISHAY Vishay Semiconductors
VISHAY TLRG / H / O / P / Y. Resistor LED for 1 V Supply Voltage Description These devices are developed for the automotive industry and other industries which use 1 V sources. The TLR.. series contains
More informationTLCW5100. Ultrabright White LED, 5 mm Untinted Non-Diffused VISHAY. Vishay Semiconductors
Ultrabright White LED, 5 mm Untinted Non-Diffused Description The series is a clear, non diffused 5 mm LED for high end applications where supreme luminous intensity required. These lamps with clear untinted
More informationBYT54. Fast Avalanche Sinterglass Diode VISHAY. Vishay Semiconductors
VISHAY BYT54. Fast Avalanche Sinterglass Diode Features Glass passivated junction Hermetically sealed package Low reverse current Soft recovery characteristics Applications Very fast rectification and
More informatione3 Pb TLRG / H / O / Y4420 Resistor LED for 12 V Supply Voltage VISHAY Vishay Semiconductors
TLRG / H / O / Y Resistor LED for 1 V Supply Voltage Description These devices are developed for the automotive industry with special requirements as for EMC (electro magnetic compatibility) in motor vehicles
More informationHigh Intensity LED, ø 5 mm Untinted Non-Diffused
High Intensity LED, ø 5 mm Untinted Non-Diffused Color Type Technology Angle of Half Intensity ± TLHK5.. AlInGaP on GaAs 9 Yellow TLHE5.. AlInGaP on GaAs 9 TLHG5.. GaP on GaP 9 Pure green TLHP5.. GaP on
More informationIL74/ ILD74/ ILQ74. Optocoupler, Phototransistor Output (Single, Dual, Quad Channel) VISHAY. Vishay Semiconductors
VISHY IL74/ ILD74/ ILQ74 Optocoupler, Phototransistor Output (Single, Dual, Quad hannel) Features IL74/ ILD74/ ILQ74 TTL ompatible Transfer Ratio, 35 % Typical oupling apacitance, pf Single, Dual, & Quad
More informationN-Channel Dual Gate MOS-Fieldeffect Tetrode, Depletion Mode. Low feedback capacitance Low noise figure
N-Channel Dual Gate MOS-Fieldeffect Tetrode, Depletion Mode Applications Electrostatic sensitive device. Observe precautions for handling. Input and mixer stages especially for VHF TV-tuners. Features
More informationN Channel Dual Gate MOS-Fieldeffect Tetrode, Depletion Mode
N Channel Dual Gate MOS-Fieldeffect Tetrode, Depletion Mode Electrostatic sensitive device. Observe precautions for handling. BF96S Applications Input- and mixer stages especially VHF TV-tuners. Features
More informationN Channel Dual Gate MOS-Fieldeffect Tetrode, Depletion Mode
N Channel Dual Gate MOS-Fieldeffect Tetrode, Depletion Mode Electrostatic sensitive device. Observe precautions for handling. BF9 Applications Input- and mixer stages especially VHF- and UHF- tuners. Features
More informationTLMPG / TLMYG330. Power SMD LED in PLCC-2 Package VISHAY. Vishay Semiconductors
VISHAY TLMPG / TLMYG33. Power SMD LED in PLCC- Package Description The TLM.33.. series is an advanced modification of the Vishay TLM.31..series. It is designed to incorporate larger chips, therefore, capable
More informationT j = 25 C Parameter Test Conditions Type Symbol Value Unit Reverse voltage, repetitive peak
Fast Recovery Silicon Power Rectifier BYT12P/6A/8A Features Multiple diffusion Mesa glass passivated Low switch on power losses Good soft recovery behaviour Fast forward recovery time Fast reverse recovery
More informationTLCR5800, TLCY5800, TLCTG5800, TLCB5800
Ultrabright LED, 5 mm Untinted Non-Diffused \ Description The series is a clear, non diffused 5 mm LED for high end applications where supreme luminous intensity and a very small emission angle is required.
More informationSDT800-STR. Description. Features. Agency Approvals. Applications. Absolute Maximum Ratings. Schematic Diagram. Ordering Information
Description The consists of two phototransistors, each optically coupled to a light emitting diode for DC input operation. Optical coupling between the input IR LED and output phototransistor allows for
More informationSmall Signal Fast Switching Diode
Small Signal Fast Switching Diode MECHANICAL DATA Case: SOD- Weight: approx.. mg Packaging codes/options: 8/K per " reel (8 mm tape), K/box 08/K per 7" reel (8 mm tape), K/box FEATURES Silicon epitaxial
More informationApplications LED READY = READY LED READY LED. Charge mode indicator. max 140 C Shunt Sense Osc. Figure 1 Block diagram with external circuit
Charge Timer Description The molithic integrated bipolar circuit is a time controlled constant current charger. Selection of charge current versus timing is according to external components at pins 2,
More informationSmall Signal Fast Switching Diode
Small Signal Fast Switching Diode MECHANICAL DATA Case: SOD- Weight: approx.. mg Packaging codes/options: 8/K per " reel (8 mm tape), K/box 08/K per 7" reel (8 mm tape), K/box FEATURES Silicon epitaxial
More informationSmall Signal Fast Switching Diode FEATURES PART ORDERING CODE INTERNAL CONSTRUCTION TYPE MARKING REMARKS
Small Signal Fast Switching Diode MARKING (example only) Bar = cathode marking XY = type code X Y 6 MECHANICAL DATA Case: SOD- Weight: approx.. mg Packaging codes/options: 8/K per " reel (8 mm tape), K/box
More information4N25/ 4N26/ 4N27/ 4N28. Optocoupler with Phototransistor Output. Vishay Telefunken. Description. Applications. Features.
Optocoupler with Phototransistor Output Description The 4N25/ 4N26/ 4N27/ 4N28 consist of a phototransistor optically coupled to a gallium arsenide infrared-emitting diode in a 6-lead plastic dual-inline
More informationBCM857BV; BCM857BS; BCM857DS
BCM857BV; BCM857BS; BCM857DS Rev. 05 27 June 2006 Product data sheet 1. Product profile 1.1 General description in small Surface-Mounted Device (SMD) plastic packages. The transistors are fully isolated
More information65 V, 100 ma NPN/PNP general-purpose transistor. Table 1. Product overview Type number Package NPN/NPN PNP/PNP Nexperia JEITA
Rev. 1 17 July 29 Product data sheet 1. Product profile 1.1 General description NPN/PNP general-purpose transistor pair in a very small Surface-Mounted Device (SMD) plastic package. Table 1. Product overview
More informationColor Type Technology
TELUX LED Color Type Technology Angle of Half Intensity ± Red TLWR76.. AlInGaP on GaAs Yellow TLWY76.. AlInGaP on GaAs Softorange TLWO76.. AlInGaP on GaAs True Green TLWTG76.. InGaN on SiC 3 Blue Green
More informationSmall Signal Fast Switching Diode FEATURES
Small Signal Fast Switching Diode MARKING (example only) Bar = cathode marking XY = type code X Y 6 DESIGN SUPPORT TOOLS click logo to get started FEATURES Silicon epitaxial planar diode Fast switching
More informationHigh-Voltage Schottky Rectifier
High-Voltage Schottky Rectifier MBR(F,B)090 & MBR(F,B)0 TO-0AC TMBS ITO-0AC FEATURES Trench MOS Schottky technology Lower power losses, high efficiency Low forward voltage drop High forward surge capability
More informationMultichannel Optocoupler with Phototransistor Output
CNY74 2H/ CNY74 4H Multichannel Optocoupler with Phototransistor Output Description The CNY74-2H and CNY74-4H consist of a phototransistor optically coupled to a gallium arsenide infrared-emitting diode
More informationNPN/PNP transistor pair connected as push-pull driver in a SOT457 (SC-74) Surface-Mounted Device (SMD) plastic package.
Rev. 0 26 September 2006 Product data sheet. Product profile. General description NPN/PNP transistor pair connected as push-pull driver in a SOT457 (SC-74) Surface-Mounted Device (SMD) plastic package..2
More informationDISCRETE SEMICONDUCTORS DATA SHEET. ok, halfpage M3D302. PMEM4020ND NPN transistor/schottky-diode module. Product data sheet 2003 Nov 10
DISCRETE SEMICONDUCTORS DATA SHEET ok, halfpage M3D302 NPN transistor/schottky-diode module 2003 Nov 0 FEATURES 600 mw total power dissipation High current capability Reduces required PCB area Reduced
More informationSmall Signal Fast Switching Diode
Small Signal Fast Switching Diode MECHANICAL DATA Case: SOD- FL Weight: approx. 9. mg Packaging codes/options: 08/K per 7" reel (8 mm tape), 8K/box FEATURES Silicon epitaxial planar diode Fast switching
More informationK817P/ K827PH/ K847PH. Optocoupler with Phototransistor Output. Vishay Telefunken. Description. Applications. Features.
Optocoupler with Phototransistor Output K817P/ K827PH/ K847PH Description The K817P/ K827PH/ K847PH consist of a phototransistor optically coupled to a gallium arsenide infrared-emitting diode in an 4-lead
More informationSmall Signal Zener Diodes, Dual
DZ-V-G Series Small Signal Zener Diodes, Dual PRIMERY CHARACTERISTICS PARAMETER VALUE UNIT range nom.. to V Test current T specification Pulse current FEATURES Dual silicon planar Zener diodes, common
More informationMOC205-M MOC206-M MOC207-M MOC208-M
DESCRIPTION These devices consist of a gallium arsenide infrared emitting diode optically coupled to a monolithic silicon phototransistor detector, in a surface mountable, small outline, plastic package.
More informationNPN/PNP low V CEsat Breakthrough in Small Signal (BISS) transistor pair in a SOT457 (SC-74) Surface Mounted Device (SMD) plastic package.
Rev. 03 11 December 2009 Product data sheet 1. Product profile 1.1 General description NPN/PNP low V CEsat Breakthrough in Small Signal (BISS) transistor pair in a SOT457 (SC-74) Surface Mounted Device
More information4N35/ 4N36/ 4N37. Optocoupler with Phototransistor Output. Vishay Telefunken. Description. Applications. Features.
Optocoupler with Phototransistor Output Description The 4N35/ 4N36/ 4N37 consist of a phototransistor optically coupled to a gallium arsenide infraredemitting diode in a 6-lead plastic dual inline package.
More informationMOC8111 MOC8112 MOC8113
PACKAGE SCHEMATIC ANODE 6 N/C 6 6 CATHODE 2 5 COLLECTOR N/C 3 4 EMITTER 6 DESCRIPTION The MOC8X series consists of a Gallium Arsenide IRED coupled with an NPN phototransistor. The base of the transistor
More information