Small Signal Zener Diodes, Dual

Transcription

1 DZ-V-G Series Small Signal Zener Diodes, Dual PRIMERY CHARACTERISTICS PARAMETER VALUE UNIT range nom.. to V Test current T specification Pulse current FEATURES Dual silicon planar Zener diodes, common cathode The Zener voltages are graded according to the international E standard. Standard Zener voltage tolerance is ± %. Replace C with B for % tolerance The parameters are valid for both diodes in one case. and R zj of the two diodes in one case is % AEC-Q qualified Compliant to RoHS Directive /9/EC and in accordance to WEEE /96/EC Note ** Please see document Vishay Material Category Policy : Int. construction Dual ORDERING INFORMATION DEVICE NAME ORDERING CODE TAPED UNITS PER REEL MINIMUM ORDER QUANTITY DZ-V-G series DZ-V-G series-8 (8 mm tape on " reel) DZ-V-G series DZ-V-G series-8 (8 mm tape on " reel) PACKAGE PACKAGE NAME WEIGHT MOLDING COMPOUND FLAMMABILITY RATING SOT- 8. mg UL 9 V- MOISTURE SENSITIVITY LEVEL MSL level (according J-STD-) SOLDERING CONDITIONS 6 C/ s at terminals ABSOLUTE MAXIMUM RATINGS (T amb = C, unless otherwise specified) PARAMETER TEST CONDITION SYMBOL VALUE UNIT Power dissipation Device on fiberglass substrate, see layout on page 6 P tot mw Thermal resistance junction to ambient air Device on fiberglass substrate, see layout on page 6 R thja K/W Junction temperature C Storage temperature range T stg - 6 to + C Zener current P tot / Rev.., 8-Feb- Document Number: 889 ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT

2 DZ-V-G Series ELECTRICAL CHARCTERISTICS (T amb = C, unless otherwise specified) PART NUMBER MARKING CODE ZENER VOLTAGE RANGE () TEST CURRENT REVERSE VOLTAGE DYNAMIC RESISTANCE f = khz TEMPERATURE COEFFICIENT OF ZENER VOLTAGE at T T T V R at I R Z Z at T Z ZK at T VZ at T V V na - / C MIN. NOM. MAX. MAX. MAX. MAX. MIN. MAX. DZCV-V-G V (< 8) < DZCV-V-G V (< 9) < DZCV-V-G V (< 9) < DZCV6-V-G V (< 9) < DZCV9-V-G V (< 9) < - - DZCV-V-G V (< 9) < DZCV-V-G V (< 8) < - DZCV-V-G V8.8.. >.8 (< 6) < 8 - DZCV6-V-G V > (< ) < - 6 DZC6V-V-G V >.8 (< ) < - DZC6V8-V-G V >. (< 8) < DZCV-V-G V..9 > (< ) < DZC8V-V-G V > 6. (< ) < DZC9V-V-G V >.8 (< ) < 8 DZC-V-G V 9..6 >.. (< ) < 8 DZC-V-G V6..6 > 8. 6 (< ) < 9 DZC-V-G V.. > 9 (< ) < DZC-V-G V8.. > 9 (< ) < 9 DZC-V-G V9.8.6 > (< ) < 9 DZC6-V-G V6. 6. > (< ) < 8 9. DZC8-V-G V > 8 (< ) < 8 9. DZC-V-G V > (< ) < 8 DZC-V-G V6.8. > (< ) < 8 DZC-V-G V6.8.6 > 8 8 (< 8) < 8 DZC-V-G V > (< 8) < 8 DZC-V-G V66 8 >. (< 8) < 8 DZC-V-G V6 > (< 8) < 8 DZC6-V-G V > (< 9) < 8 DZC9-V-G V69 9 > 9 (< 9) < DZC-V-G V 6 > 6 (< ) < DZC-V-G V > (< ) < DZC-V-G V 8 > 8 (< ) < Note () Tested with pulses t p = ms Rev.., 8-Feb- Document Number: 889 ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT

3 DZ-V-G Series ELECTRICAL CHARCTERISTICS (T amb = C, unless otherwise specified) PART NUMBER MARKING CODE ZENER VOLTAGE RANGE () TEST CURRENT REVERSE VOLTAGE DYNAMIC RESISTANCE f = khz TEMPERATURE COEFFICIENT OF ZENER VOLTAGE at T T T V R at I R Z Z at T Z ZK at T VZ at T V V na - / C MIN. NOM. MAX. MAX. MAX. MAX. MIN. MAX. DZBV-V-G V (< 8) < DZBV-V-G V (< 9) < DZBV-V-G V (< 9) < DZBV6-V-G V (< 9) < DZBV9-V-G V (< 9) < - - DZBV-V-G V (< 9) < DZBV-V-G V (< 8) < - DZBV-V-G V88.. >.8 (< 6) < 8 - DZBV6-V-G V > (< ) < - 6 DZB6V-V-G V >.8 (< ) < - DZB6V8-V-G V >. (< 8) < DZBV-V-G V9...6 > (< ) < DZB8V-V-G V > 6. (< ) < DZB9V-V-G V >.8 (< ) < 8 DZB-V-G V >.. (< ) < 8 DZB-V-G V96.8. > 8. 6 (< ) < 9 DZB-V-G V9.8. > 9 (< ) < DZB-V-G V98.. > 9 (< ) < 9 DZB-V-G V99.. > (< ) < 9 DZB6-V-G VA > (< ) < 8. DZB8-V-G VA > 8 (< ) < 8. DZB-V-G VA 9.6. > (< ) < 8 DZB-V-G VA.6. > (< ) < 8 DZB-V-G VA.. > 8 8 (< 8) < 8 DZB-V-G VA 6.. > (< 8) < 8 DZB-V-G VA >. (< 8) < 8 DZB-V-G VA.. > (< 8) < 8 DZB6-V-G VA > (< 9) < 8 DZB9-V-G VA > 9 (< 9) < DZB-V-G VB..9 > 6 (< ) < DZB-V-G VB 6..9 > (< ) < DZB-V-G VB > 8 (< ) < Note () Tested with pulses t p = ms Rev.., 8-Feb- Document Number: 889 ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT

4 DZ-V-G Series BASIC CHARACTERISTICS (T amb = C, unless otherwise specified) I F T J = C T J = C V V F Fig. - Forward Characteristics r zj Ω. 89 T J = C 8 6.8/8. 6. Fig. - Dynamic Resistance vs. Zener Current mw Ω = C P tot R zj C 8 T amb Fig. - Admissible Power Dissipation vs. Ambient Temperature. 8 Fig. - Dynamic Resistance vs. Zener Current r zj T J = C Fig. - Dynamic Resistance vs. Zener Current R zth K/W 8 R zth = R tha x x negative positive V at = Fig. 6 - Thermal Differential Resistance vs. Zener Voltage Rev.., 8-Feb- Document Number: 889 ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT

5 DZ-V-G Series R zj Ω 8 = C = V mv/ C 8 6 = 6 8 V 8 Fig. - Dynamic Resistance vs. Zener Voltage Fig. - Temperature Dependence of Zener Voltage vs. Zener Voltage mv/ C - 8 = V Fig. 8 - Temperature Dependence of Zener Voltage vs. Zener Voltage V = C 86 Fig. - Change of Zener Voltage vs. Junction Temperature V at = C V = R zth x V at = Fig. 9 - Change of Zener Voltage vs. Junction Temperature Fig. - Change of Zener Voltage from Turn-on up to the Point of Thermal Equilibrium vs. Zener voltage Rev.., 8-Feb- Document Number: 889 ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT

6 DZ-V-G Series V = R zth x = l Z 8 = C = Test current V 88 Fig. - Change of Zener Voltage from Turn-on up to the Point of Thermal Equilibrium vs. Zener voltage V 8 Fig. - Breakdown Characteristics l Z = C l Z 8 6 Test current 9 = C Test current V 8 Fig. - Breakdown Characteristics V 8 Fig. 6 - Breakdown Characteristics LAYOUT FOR R thja TEST Thickness: fiberglass.9" (. mm) Copper leads." (. mm). (.) (.) (.) (.) (.8) (.8) (.) (.9).8 (.) (.). (.6). (.) Rev.., 8-Feb- 6 Document Number: 889 ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT

7 DZ-V-G Series PACKAGE DIMENSIONS in millimeters (inches): SOT-. (.).8 (.). (.) max.. ref. (. ref.). (.).98 (.). (.8). (.).9 (.). (.8). (.). (.8). (.). (.). (.).6 (.). (.9) to 8. (.8). (.). (.6). (.) Foot print recommendation:. (.8) (.9).9 (.) (.9).9 (.) (.9).9 (.) Document no.: Rev. 8 - Date:.Sept (.).9 (.) Rev.., 8-Feb- Document Number: 889 ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT

8 Legal Disclaimer Notice Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, Vishay ), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer s technical experts. Product specifications do not expand or otherwise modify Vishay s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk and agree to fully indemnify and hold Vishay and its distributors harmless from and against any and all claims, liabilities, expenses and damages arising or resulting in connection with such use or sale, including attorneys fees, even if such claim alleges that Vishay or its distributor was negligent regarding the design or manufacture of the part. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Material Category Policy Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the definitions and restrictions defined under Directive /6/EU of The European Parliament and of the Council of June 8, on the restriction of the use of certain hazardous substances in electrical and electronic equipment (EEE) - recast, unless otherwise specified as non-compliant. Please note that some Vishay documentation may still make reference to RoHS Directive /9/EC. We confirm that all the products identified as being compliant to Directive /9/EC conform to Directive /6/EU. Revision: -Mar- Document Number: 9