ACX Advanced Ceramic X
|
|
- Barnaby Stanley
- 5 years ago
- Views:
Transcription
1 LF 2012 Series Multilayer Chip Low-Pass Filters Features Monolithic structure replacing two inductors and five capacitors. RoHS compliant Applications 0.8-6GHz wireless communication systems, including DECT / PACS / PHS / GSM / DCS / PCS phones, WLAN card, Bluetooth modules, etc. Specifications Part Number LF2012- B2R4FAA_ Frequency Range (MHz) Operating Temperature Range Storage Temperature Range Storage Period Power Capacity Part Number Insertion BW Attn. 2 x f o Attn. 3 x f o Attn. 4 x f o BW Q ty/ Reel (pcs) 2400~ max. 27 min. 25 min. 25 min 1.8 max. 4,000 : -40 ~ +85 o C : -40 ~ +85 o C : 12 months max. : 3W max. LF B 2R4 FAA /LF Type LF : Low Pass Filter Dimensions ( L W ) mm Material Code B Frequency Range 2R4=2400MHz Specification Code FAA Packaging T: Tape & Reel B: Bulk Soldering /LF=lead-free Terminal Configuration No. Terminal Name No. Terminal Name NC NC OUT IN LF2012-B2R4FAAT/LF REV:3 PAGE:1/7
2 Dimensions and Recommended PC Board Pattern a p Unit : mm a W T c L g b Mark L W T a b c g p Dimensions / Solder Resist * * Land Through-hole ( 0.3) 0.30 DC Blocking Capacitor 0.35 * Line width should be designed to match 50 characteristic impedance, depending on PCB material and thickness. * DC Blocking capacitor is connected in series at each In/Out Port. LF2012-B2R4FAAT/LF REV:3 PAGE:2/7
3 Measuring Diagram (50) Network Analyzer (50) Typical Electrical Characteristics(T=25 o C) 0-10 db(s(2,2)) db(s(2,1)) db(s(1,1)) freq, GHz Notes The contents of this data sheet are subject to change without notice. Please confirm the specifications and delivery conditions when placing your order. LF2012-B2R4FAAT/LF REV:3 PAGE:3/7
4 Taping Specifications Tape Dimensions (Unit: mm) & Quantity A D 1.75 ± C T EMBOSS B A E F TAPE Type A A B C D E F T Quantity/reel Tape material ± 4.0± 1.35± 2.15± 2.0± 3.5± 8.0± 1.08± 4,000pcs Plastic (Embossed) Reel Dimensions (Unit: mm) Label 1.4 ± ± 1 60±1 Label: Customer s Name, P/N, Q ty, Date, A 13.5±0.5 B Corp. Type A B ± ±0.3 Leader and Trailer Tape Trailer End Trailer (160 mm min.) Empty Compartments with Cover Tape (500 mm min.) LF2012-B2R4FAAT/LF REV:3 PAGE:4/7
5 Peel-off Force Peeling Direction Top Cover Tape <10 0 Carrier Tape Peel-off force should be in the range of 0.6 N at a peel-off speed of 300±10 mm/min. Storage Conditions (1) Temperature: +5 ~35, relative humidity (RH): 45~75%. (2) Non-corrosive environment. Notes The contents of this data sheet are subject to change without notice. Please confirm the specifications and delivery conditions when placing your order. LF2012-B2R4FAAT/LF REV:3 PAGE:5/7
6 Mechanical & Environmental Characteristics Item Requirements Procedure Solderability Soldering strength (Termination Adhesion) 2. More than 95% of the terminal 1. Preheat: o C electrode shall be covered with 2. Solder: o C for 5 1 sec new solder 1. Solder specimen onto test jig. 2. Apply push force at 0.5mm/s until electrode pads are 1. 1kg minimum peeled off or ceramic are broken. Pushing force is applied to longitude direction 1. Solder specimen onto test jig (FR4, 0.8mm) using the recommend soldering profile. 2. Apply a bending force of 2mm deflection Deflection (Substrate Bending) R230 Pressure Rod 90mm 1. Temperature: 85 2 o C Heat/Humidity 2. Humidity: 90% ~ 95% RH 2. Fulfill the electrical specification Resistance 3. Duration: 1000±48hrs after test 4. Recovery: 1-2hrs 1. One cycle/step 1:125 ± 5C for 30 min Thermal shock step 2:- 40 ± 5C for 30 min 2. Fulfill the electrical specification (Temperature Cycle) 2. No of cycles:100 after test 3. Recovery:1-2 hrs 1. Temperature: -40 o 5 o C Low Temperature 2. Fulfill the electrical specification 2. Duration: 500 ±24hrs Resistance after test 3. Recovery: 1-2hrs LF2012-B2R4FAAT/LF REV:3 PAGE:6/7
7 Soldering Conditions Typical Soldering Profile for Lead-free Process Reflow Soldering : Temperature ( o C) 260 o C 217 o C o C 20s max. Pre-heating s. Time (s.) s Notes The contents of this data sheet are subject to change without notice. Please confirm the specifications and delivery conditions when placing your order. Corp. 16 Tzu Chiang Road, Hsinchu Industrial District Hsinchu Hsien 303, Taiwan TEL: FAX: acx@acxc.com.tw LF2012-B2R4FAAT/LF REV:3 PAGE:7/7
ACX Advanced Ceramic X
LF 1608 Series Multilayer Chip Low-Pass Filters ACX Features Monolithic structure replacing one inductor and three capacitors. Applications 0.8-6GHz wireless communication systems, including DECT / PACS
More informationACX Advanced Ceramic X
BF 1608 Series Multilayer Chip Band-Pass Filters Features Ultra small SMD type with low loss at passband and high attenuation at stop-band. ACX Applications 0.8 ~ 6 GHz wireless communication systems,
More informationACX Advanced Ceramic X
DP 1608 Series Multilayer Chip Diplexers Features Monolithic structure including one low-pass and one band-pass filters with loss pole at adjacent passband. RoHS compliant ACX Applications Dual-band /
More informationACX Advanced Ceramic X
BF 1411 Series Multilayer Chip Band-Pass Filters Features Ultra small SMD type with low loss at passband and high attenuation at stop-band. RoHS compliant Applications 2.4 GHz wireless communication systems,
More informationINPAQ. Specification RDP201208T-05EACME1BE. Product Name. RF Diplexer. Global RF/Component Solutions
RDP201208T-05EACME1BE Specification Product Name Series Part No RF Diplexer RDP2012 Series RDP201208T-05EACME1BE Size EIAJ 2012 RDP2012 SERIES (RF Diplexer) Engineering Specification Scope RDP series (RF
More informationINPAQ. Specification. WIP252012S L Series. Product Name. Power Inductor. Size EIAJ Global RF/Component Solutions
WIP252012S L Series Specification Product Name Series Power Inductor WIP252012S L Series Size EIAJ 2520 WIP252012S L Series Engineering Specification 1. Scope Feature High saturation current realized by
More informationWIP201610P L Series Engineering Specification
RoHS Pb WIP16P L Series Engineering 1. Scope Feature High saturation current realized by material properties and structure design Low DC resistance to achieve high conversion efficiency and lower temperature
More informationWIP252012P L Series Engineering Specification
RoHS Pb WIP212P L Series Engineering 1. Scope Feature High saturation current realized by material properties and structure design Low DC resistance to achieve high conversion efficiency and lower temperature
More informationSpecification For LTCC Doherty Combiner
Specification For Model Name : Customer : Title: Name : APPROVED By Date : Signature : RN2 Technologies co., Ltd. RN2 Technologies co., Ltd. 284-2, Galgot-ri, Jinwe-myeon, Pyeongtaek-si, Kyunggi-do, KOREA
More informationDATASHEET AMOTECH. Application
AMOTECH Co., Ltd. Document Datasheet Type Dielectric Chip Antenna Application.4GHz/5GHz Part No. AMAN0005ST06 Revision 0.0 DATASHEET Application WLAN Dual-band(.4GHz/5GHz) Features PIFA structure Size
More informationSpecification For LTCC Doherty Combiner
Specification For Model Name : Customer : Title: Name : APPROVED By Date : Signature : RN2 Technologies co., Ltd. RN2 Technologies co., Ltd. 284-2, Galgot-ri, Jinwe-myeon, Pyeongtaek-si, Kyunggi-do, KOREA
More informationINPAQ Global RF/Component Solutions
MIP P Series Specification Product Name Series Power Inductor MIP P Series Size EIAJ Multilayer Power Inductor (MIP P Series) Engineering Spec. PART NUMBER AND CHARACTERISTICS TABLE INPAQ MIP-P series
More informationWIP201610P Series Engineering Specification
RoHS Pb WIP201610P Series Engineering 1. Scope Feature Low Profile: 2.0 mm 1.6 mm 1.0 mm. Magnetically shielded structure to accomplish high resolution in EMC protection. Halogen free, Lead Free, RoHS
More informationINPAQ Global RF/Component Solutions
MHC 1005-4532 S Series Specification Product Name Series High Current Chip Bead MHC S Series Size EIAJ 1005-4532 Chip Ferrite Bead for High Current (MHC S Series) Engineering Spec. INPAQ FEATURES Combination
More informationApproval sheet. WLBD0603 Chip Bead. *Contents in this sheet are subject to change without prior notice.
WLBD0603 Chip Bead *Contents in this sheet are subject to change without prior notice. Page 1 of 8 ASC_ WLBD0603 Series_V2.0 Sep. 2016 FEATURES 1. Closed magnetic circuit. APPLICATIONS 1. Noise reduction
More informationLead-Free Current Sensing Resistors RLS Series ( Halogen-Free )
page 1/8 1. Scope: This specification applied to the products of Lead-Free current sensing resistor of metal foil for Lead-Free RLS series manufactured by TA-I TECHNOLOGY CO.,LTD. 2. Type Designation:
More informationMetal Oxide Varistor:TVM-G Series
Features 1. RoHS compliant 2. Low clamping voltage 3. EIA size 0402, 0603, 0805 4. Working voltage: 5.5 ~ 30 Vdc 5. Bidirectional and symmetrical V/I characteristics 6. Multilayer ceramic construction
More informationChip Inductors. LCCM Series Chip Common Mode Filter FEATURES CONSTRUCTION
FEATURES Small wire wound chip inductor with ferrite core and 2 common mode lines. Highly effective in noise suppression High common-mode impedance at noise band an low differential mode impedance at signal
More informationNTC Thermistor:TSM Series
Features. RoHS & Halogen Free (HF) compliant. EIA size: 00, 00, 00, 080. Highly reliable structure. Operating temperature range: -0 ~+. Wide resistance range. Cost effective. Agency recognition: UL / cul
More informationMULTILAYER CERAMIC CAPACITORS High Q / Low ESR Series (HH) 0402, 0603 & 0805 Sizes NP0 Dielectric RoHS Compliance
MULTILAYER CERAMIC CAPACITORS 0402, 0603 & 0805 Sizes NP0 Dielectric RoHS Compliance *Contents in this sheet are subject to change without prior notice. Page of ASC_ HQ_Low ESR_(HH)_006N_AS Apr. 202 .
More informationMULTILAYER CERAMIC CAPACITORS
MULTILAYER CERAMIC CAPACITORS 1. INTRODUCTION MLCC Consists of a conducting material and electrodes. To manufacture a chip-type SMT and achieve miniaturization, high density and high efficiency, ceramic
More informationWLPN Series Shielded SMD Power Inductors
WLPN505020 Series Shielded SMD Power Inductors *Contents in this sheet are subject to change without prior notice. Page 1 of 9 ASC_WLPN505020 Series_V0.0 Dec. 2016 1R0 Approval sheet Features 1. Close
More informationConfigurations: Dimension (mm) B (max) A (max) Item. Inductance Range. Item ISB ~ ISB ~ ISB ~ 1000.
SMT Shielded Power s ISB3, ISB4, ISB5 Configurations: FEATURES Magnetically shielded construction. Compact and thin. Wire burst resistant due to special construction. RoHS Compliant. APPLICATION DC-DC
More informationApproval sheet. WLBD2012 Chip Bead. *Contents in this sheet are subject to change without prior notice.
WLBD2012 Chip Bead *Contents in this sheet are subject to change without prior notice. Page 1 of 8 ASC_ WLBD2012 Series_V5.0 Jun. 2017 FEATURES 1. Closed magnetic circuit. APPLICATIONS 1. Noise reduction
More informationApproval sheet. WLBD1005 Chip Bead. *Contents in this sheet are subject to change without prior notice.
WLBD1005 Chip Bead *Contents in this sheet are subject to change without prior notice. Page 1 of 8 ASC_ WLBD1005 Series_V4.0 Jun. 2017 FEATURES 1. Closed magnetic circuit. APPLICATIONS 1. Noise reduction
More informationWLPN Series SMD Molded Power Choke Inductors
WLPN303010 Series SMD Molded Power Choke Inductors *Contents in this sheet are subject to change without prior notice. Page 1 of 9 ASC_WLPN303010 Series_V3.0 Oct. 2016 Features 1. Close magnetic loop with
More informationWLPN Series Shielded SMD Power Inductors
WLPN202012 Series Shielded SMD Power Inductors *Contents in this sheet are subject to change without prior notice. Page 1 of 9 ASC_WLPN202012 Series_V2.0 Sep. 2014 Features 1. Close magnetic loop with
More informationMGB SERIES (Chip Ferrite Bead for GHz Range) Engineering Specification
MG SERIES (Chip Ferrite ead for GHz Range) Engineering Specification RoHS Features and Application.Effectively filtering capability over a wide range of frequency (Several MHz to GHz).Monolithic inorganic
More informationRF Transformer (Stabilized Matching Device) SMST15 series
1 Features RF Transformer Stabilized Matching Device is RF impedance matching components. You can adjust impedance matching easily between antenna and feeding point, when you use RF Transformer. RF Transformer
More information1.2 Scope: This specification is applied Noise Filter STC-D series supplied
1.0 PURPOSE / SCOPE 1.1 Purpose: To define the quality of Noise Filter STC-D series. 1.2 Scope: This specification is applied Noise Filter STC-D series supplied by SMI-ED. 2.0 GENERAL 2.1 Reference 2.1.1
More informationApproval sheet. WLBD1608 Chip Bead. *Contents in this sheet are subject to change without prior notice.
WLBD1608 Chip Bead *Contents in this sheet are subject to change without prior notice. Page 1 of 8 ASC_ WLBD1608 Series_V4.0 Sep. 2016 FEATURES 1. Closed magnetic circuit. APPLICATIONS 1. Noise reduction
More informationLKT. Low Voltage Multilayer Chip Ceramic Capacitor. Capacitance and Capacitance Tolerance
Capacitance and Capacitance Tolerance Different circuit needs different capacitance and capacitance tolerance. So the selection of capacitance is depended on the need of customers. Dielectric Material
More informationWLBD1608HC High Current Chip Bead
WLBD1608HC High Current Chip Bead *Contents in this sheet are subject to change without prior notice. Page 1 of 7 ASC_ WLBD1608HC Series_V5.0 Jun.2017 FEATURES 1. Closed magnetic circuit. 2. High current
More informationMagnetic Sealing SMD Inductor
1. Scope This Specification is applied to the Pb free high current type SMD inductor for ZLRH1270CXXXXT. 2. Part Number Code ZLRH 1270 C 330 M T (1) (2) (3) (4) (5) (6) (1) Series Number: ZLMR-Magnetic
More information50 TZV 1500 M JDE VB 18X21.5
EXTENDED BASE FEATURES: VB- VIBRATION BASE AEC-Q200 SURFACE MOUNT ROHS COMPLIANT APPLICATIONS: AUTOMOTIVE POWER INDUSTRIAL SPEC: VALUE: MPN :50 TZV 1500 M JDE VB 18X21.5 VDC 50 CAPACITANCE 1500μF +/- 20%
More informationProduct Dimension Recommended Solder Pad
1,45±0,2 Product Identification GMWI - 201209-1R0 M R 1 2 3 4 5 1 :Product Code 2 :Dimension Code (mm) 3 :Inductance 4 :Tolerance Code :N = ±30%,M = ±20% 5 :Code for Special Specification Product Dimension
More informationSpecification For LTCC Doherty Coupler
Specification For Model Name : Customer : Title: Name : APPROVED By Date : Signature : RN2 Technologies co., Ltd. RN2 Technologies co., Ltd. 284-2, Galgot-ri, Jinwe-myeon, Pyeongtaek-si, Kyunggi-do, KOREA
More informationSPECIFICATION. 1. Scope This specification applies ferrite Chip common mode filters C3-2012F-Series to be delivered to user.
C C3-202F-Series. Scope This specification applies C3-202F-Series to be delivered to user. 2. Product Identification C3-202 F - 900-2P - T () (2) (3) (4) (5) (6) () Product name (2) Shapes and dimensions
More informationWLPN Series Shielded SMD Power Inductors
WLPN404018 Series Shielded SMD Power Inductors *Contents in this sheet are subject to change without prior notice. Page 1 of 11 ASC_WLPN404018 Series_V2.0 Oct. 2016 Features 1. Close magnetic loop with
More informationMULTILAYER CERAMIC CAPACITORS High Q / Low ESR Series (HH) 0201 to 0805 Sizes NP0 Dielectric Halogen Free & RoHS Compliance
MULTILAYER CERAMIC CAPACITORS High Q / Low ESR Series (HH) 0201 to 0805 Sizes NP0 Dielectric Halogen Free & RoHS Compliance *Contents in this sheet are subject to change without prior notice. Page 1 of
More informationLow Inductance Ceramic Capacitor (LICC)
Low Inductance Ceramic Capacitor (LICC) LICC(Low Inductance Ceramic Capacitor) is a kind of MLCC that is used for decoupling in High Speed IC. The termination shape of LICC is different from that of MLCC.
More informationChip Type Y5U Temperature Characteristics
Chip Type Y5U Temperature Characteristics Features Dimensions Large capacitance in small size Temperature characteristics of Y5U (within +% to 56% in the range of 5 C to +85 C) Features equivalent to X7V.
More informationMuti-Layer Thermistor
Document No TMTR-XXOS002A 1/10 1. Scope : This specification applies for the Lead-Free MTR series of Muti-Layer thermistor made by TA-I. 2. Construction: Protective Coating Sn Plating Ni Plating Ag Electrode
More informationMULTILAYER CERAMIC CAPACITORS Microwave Series (RF) to 1111 Sizes (6.3V to 1500V) NP0 Dielectric Halogen Free & RoHS Compliance
MULTILAYER CERAMIC CAPACITORS Microwave Series (RF) 01005 to 1111 Sizes (6.3V to 1500V) NP0 Dielectric Halogen Free & RoHS Compliance *Contents in this sheet are subject to change without prior notice.
More informationMetal Oxide Varistor:TVM-B Series
Features. RoHS & Halogen Free (HF) compliant. EIA size: 040 ~ 0 3. Operating voltage: 5.5Vdc ~ 85Vdc 4. High surge suppress capability 5. Bidirectional and symmetrical V/I characteristics 6. Multilayer
More informationWLPM Series SMD Molded Power Inductors
WLPM25212 Series SMD Molded Power Inductors *Contents in this sheet are subject to change without prior notice. Page 1 of 1 ASC_WLPM25212 Series_V4. Jun. 217 Features 1. Shielded construction. 2. Ultra
More informationPMLCAP. Polymer Multi Layer Capacitor Specification Sheet RUBYCON CORPORATION PML DIVISION. PMLCAP ST series RPR Rubycon PART No. Drawing No.
To Polymer Multi Layer Capacitor Specification Sheet Rubycon PART No. ST series Drawing No. RPR-0024 Issued Date October 15, 2008 PML DIVISION 2932, MOTOOSHIMA, MATSUKAWA-MACHI, SHIMOINA-GUN, NAGANO-KEN,
More informationSPECIFICATION. Surface Acoustic Wave Filter. SMS-51-L-SFT FX-22 DATE July 23, 2013 WISOL. Hong, Seong-Su. User WISOL CO., LTD.
SPECIFICATION Surface Acoustic Wave Filter USER USER PART No. SEMCO PART No. DOC. No. DATE July 23, 2013 REVISION Preliminary WISOL Kim, Kyung-Sik Hong, Seong-Su Jeon. Hyeon Cheol ISSUED BY APPROVED BY
More informationTEA10402V15A0 Engineering Specification
TEA10402V15A0 Engineering 1. Scope This specification is applied to electrostatic discharge (ESD) protection. It is designed to protect the high-speed data lines against ESD transients. It has very low
More informationDATA SHEET SURFACE-MOUNT CERAMIC MULTILAYER CAPACITORS General purpose & High capacitance Class 2, X5R
DATA SHEET SURFACE-MOUNT CERAMIC MULTILAYER CAPACITORS General purpose & High capacitance Class 2, 6.3 V TO 50 V 10 nf to 100 µf RoHS compliant Product Specification Product specification 2 Surface-Mount
More informationDATA SHEET Anti-Sulphur Thick Film Chip Resistor SAS(A/B) Series
DATA SHEET Anti-Sulphur Thick Film Chip Resistor SAS(A/B) Series 0.5% TO 5.0%, TCR -200 TO +400 SIZE: 0201/0402/0603/0805/1206/1210/2010/2512 RoHs Compliant May 08, 2017 V.4 Page: 2 of 1. SCOPE 1.1 This
More informationDATA SHEET SURFACE MOUNT MULTILAYER CERAMIC CAPACITORS General purpose & High capacitance Class 2, X5R
DATA SHEET SURFACE MOUNT MULTILAYER CERAMIC CAPACITORS General purpose & High capacitance Class 2, 4 V TO 50 V 100 pf to 100 µf RoHS compliant & Halogen free Product Specification Product specification
More informationDATA SHEET SURFACE-MOUNT CERAMIC MULTILAYER CAPACITORS General purpose & High capacitance Class 2, X5R
DATA SHEET SURFACE-MOUNT CERAMIC MULTILAYER CAPACITORS General purpose & High capacitance Class 2, 6.3 V TO 50 V 10 nf to 100 µf RoHS compliant Product Specification Product specification 2 Surface-Mount
More informationProsperity Dielectrics Co., Ltd. 1 ACS-1045 Rev15
1. DESCRIPTION MLCC consists of a conducting material and electrodes. To manufacture a chip-type SMT and achieve miniaturization, high density and high efficiency, ceramic condensers are used. WTC high
More informationResistance (R 25) Ω Ω Ω. Tolerance of R 25 M ±20% H ±25% S ±35%
Features 1. RoHS & Halogen-free compliant 2. EIA size 63,85,121 3. Suitable for reflow soldering 4. Suitable for over-current or short circuit protection 5. Agency Recognition: UL&cUL:File No.E138827 TUV:File
More informationAPPROVAL SHEET FOR AL. ELECTROLYTIC CAPACITORS
NO : ED-A5540 TO : APPROVED APPROVAL SHEET FOR AL. ELECTROLYTIC CAPACITORS : BY: Series Description Part No. HV series, PLEASE RETURN US ONE COPY YOUR SIGED SPECIFICATION AFTER YOU APPROVED OF IT. APPROVED
More informationCommon mode ESD filter LXES**D series Document No. LX Rev1.2
Common mode ESD filter LXES**D series Document No. LX 1-1126 Rev1.2 1. This specification shall be applied to the ESD Protection Device. LXES11DAA2-135 LXES21DAA4-136 LXES11DAA2-137 LXES21DAA4-138 LXES21DAA4-14
More informationALUMINUM ELECTROLYTIC CAPACITORS REFERENCE SHEET
TO Messrs. AVNET ABACUS ALUMINUM ELECTROLYTIC CAPACITORS REFERENCE SHEET CUSTOMER PART No. Rubycon PART No. 35 TLV 470 M 12.5X13.5 DRAWING No. RERS 011758 ISSUE No. 1 ISSUE DATE 25 AUGUST 2010 ENGINEERING
More informationHigh Q / Low ESR Multilayer SMD Ceramic Capacitor 0402, 0603 & 0805 Sizes, NP0 Dielectric, (MCHH)Series
Description: MLCC consists of a conducting material and electrodes. To manufacture a chip-type SMT and achieve miniaturization, high density and high efficiency, ceramic condensers are used. WTC HH series
More informationMicrowave Multilayer SMD Ceramic Capacitor 0201 to 0805 Sizes (6.3V to 500V), NP0 Dielectric, (MCRF)Series
Description: MLCC consists of a conducting material and electrodes. To manufacture a chip-type SMT and achieve miniaturization, high density and high efficiency, ceramic condensers are used. WTC RF series
More informationCHIP FERRITE INDUCTORS
CHIP FERRITE INDUCTORS Features. Perfect for high density surface mount applications since magnetic shield dliminates crosstalk. 2. Highly reliable in wide temperature and humidity range. Superior Q characteristics
More informationCHIP FERRITE BEADS. Features. Applications. Ordering Information. Shape and Dimensions
CHIP FERRITE BEADS Features 1. Effective for suppressing noise at high frequency, from several MHz to several hundreds MHz. 2. Chip type is suited for preventing the abnormal oscillation in high frequency
More informationSpecifications. Customer Part Number - Customer Specification Number -
Specifications TO: KED USA Drawing No. UKY1C-H1-14D77-00[43] 1/11 Issued Date. Dec,12,2014 Note:In case of specification change, KYOCERA Part Number also will be changed. Product Name Quartz Crystal Product
More information*Contents in this sheet are subject to change without prior notice.
MULTILAYER CERAMIC CAPACITORS Soft Termination High Voltage Series (SH_200V to 3000V) NP0 & X7R Dielectrics 0603 to 1812 Sizes, 200V to 3000V Halogen Free & RoHS Compliance *Contents in this sheet are
More informationData sheet FIXED CHIP RESISTORS; RECTANGULAR TYPE & WIDE TERMINATION. AEC-Q200 qualified. RoHS COMPLIANCE ITEM Halogen and Antimony Free
No.: TWMC K HTS-0001 /4 Date: 2017. 4. 21 Data sheet Title: FIXED CHIP RESISTORS; RECTANGULAR TYPE & WIDE TERMINATION Style: TWMC32, 50, 63 AEC-Q200 qualified RoHS COMPLIANCE ITEM Halogen and Antimony
More informationMAG.LAYERS G M L B A - N 8
APPLIICATIION GMLB chip beads can be used in a variety of electronic applications including: Computers and Computer Peripherals Cellular Communication Equipment Digital Cameras Digital Televisions Audio
More information(1) SHAPES AND DIMENSIONS
Ⅰ. SCOPE: This specification applies to the Pb Free high current type SMD Common mode filter for MCM-2M-SERIES PRODUCT INDENTIFICATION MCM - 2M - 70 2 3 Product Code 2 Dimensions Code 3 Impedance Code
More informationShielded SMT Power Inductor SPRI2D10P Series
Part : SPRI2D10P SERIES Version : AD Page : 1 / 6 Feature Shielded SMT Power Inductor SPRI2D10P Series Low profile, low Rdc, and high current handling capacities. Magnetically shielded structure that ensures
More informationShielded Power Inductors TL- 4020SG Series (4.0 x 4.0 x 2.1mm)
Shielded Power Inductors TL- 42SG Series (4. x 4. x 2.1mm) FEATURES Low DCR and excellent current handling 4. x 4. mm footprint; 2.1 mm maximum height Operating temperature range: 4 C to +125 C with Irms
More informationElectronics Corp. Multi-Layer Ceramic Capacitor. Lead-free termination is in compliance with the requirement of green plan and ROHS.
X5R, X7R Dielectrics Features A monolithic structure ensures high reliability and mechanical strength. High capacitance density. A wide range of capacitance values in standard case size. Suitable for high
More informationShock Sensor Specification. Part No. : PMLE480W-R. RoHS Compliant. Halogen-Free Compliant. 16.Dec KYOCERA CORPORATION
Messrs. Shock Sensor Specification Part No. : PMLE480W-R RoHS Compliant Halogen-Free Compliant 16.Dec. 2010 Approved by Checked by Issued by Kazuki Shimizu Yasuhiro Nakai Akira Oikawa KYOCERA CORPORATION
More informationCONTENT (MLCC) E STANDARD NUMBER... 3 STRUCTURE... 4 ORDERING CODE... 4 SUPER SMALL SIZE (EIA 01005)... 5
MLCC MLCC CONTENT (MLCC) E STANDARD NUMBER... 3 STRUCTURE... 4 ORDERING CODE... 4 SUPER SMALL SIZE (EIA 01005)... 5 NP0 Series... 6 X7R Series... 7 TEST SPEC.... 8 PACKAGE... 10 OTHERS... 13 E Standard
More informationDATA SHEET General Purpose Thick Film Chip Resistor CR Series
Towards Excellence in Quality, Service & Innovation DATA SHEET General Purpose Thick Film Chip Resistor 1% TO 5%, TCR -200 TO +600 SIZE: 01005/0201/0402/0603/0805/1206/1210/2010/2512 RoHs Compliant Jan
More informationSB/PB Series. Multilayer Ferrite Chip Beads. [ PB Series for Large Current ] APPLICATIONS OUTLINE PRODUCT IDENTIFICATION FEATURES
YAGEO COPOATION SMD INDUCTO/BEADS Multilayer Ferrite Chip Beads SB/PB Series [ PB Series for Large Current ] APPLICATIONS Prevention of high frequency EMI form computers, printers, VCs, TVs, wireless telephone
More informationTAI-SAW TECHNOLOGY CO., LTD. TCXO SMD 3.2x MHz
TAI-SAW TECHNOLOGY CO., LTD. TCXO SMD 3.2x2.5 24.0000MHz MODEL NO.: TX0283D REV. NO.: 1 Revise: Rev. Rev. Page Rev. Account Date Ref. No. Revised by 1 N/A Initial release 4/19/10 N/A C.C. Hsu 2 TAI-SAW
More informationSMD Shielded Power Inductor. TIS8D43GS Series. Features. Applications. Dimensions
SMD Shielded Power Inductor Features Magnetically shielded construction Compact and thin Large current and low DCR RoHS Compliant Applications DC-DC converter of portable equipment Camcorder, LCD television
More informationDATA SHEET SURFACE-MOUNT CERAMIC MULTILAYER CAPACITORS General Purpose & High Capacitance Class 2, X7R
Product Specification May 26, 2015 V.12 DATA SHEET SURFACE-MOUNT CERAMIC MULTILAYER CAPACITORS General Purpose & High Capacitance Class 2, 6.3 V TO 50 V 100 pf to 22 µf RoHS compliant & Halogen Free Product
More informationMultilayer Ceramic Capacitors
Multilayer Ceramic Capacitors Super Low Distortion Multilayer Ceramic Capacitors, Medium-High Voltage Multilayer Ceramic Capacitors and High Reliability Application Multilayer Ceramic Capacitors are noted
More informationMulti-Layer Ferrite Chip Beads
Multi-Layer Ferrite Chip Beads ODEING CODE BP 3 T T S PODUCT CODE BF : For General Signal Lines BP : For Power Lines BH : For High Speed Signal Lines (1MHz~) BS : For Higher Speed Signal Lines (MHz~) DIMENSION
More informationSpecification of V-PORT XXXX-X-V05 Series
1 Scope Specification of V-PORT-0402 -XXXX-X-V05 Series This specification is applied to ESD and EMI protection for I/O port, for example, VGA, US etc. The customer designed part number drawing take precedence
More information100 pf to 47µF RoHS compliant & Halogen free
Product Specification August 7, 2017 V.4 DATA SHEET SURFACE MOUNT MULTILAYER CERAMIC CAPACITORS General purpose class II X6S 4 V TO 50 V 0 pf to 47µF RoHS compliant & Halogen free 2 SCOPE This specification
More informationCONTENT (MLCC) E STANDARD NUMBER... 3 STRUCTURE... 4 ORDERING CODE... 4 SUPER SMALL SIZE (EIA 01005)... 5 PACKAGE... 9 OTHERS...
MLCC CONTENT (MLCC) E STANDARD NUMBER... 3 STRUCTURE... 4 ORDERING CODE... 4 SUPER SMALL SIZE (EIA 01005)... 5 TEST SPEC.... 7 MLCC PACKAGE... 9 OTHERS... 13 E Standard Number E3 1.0 2.2 4.7 E6 1.0 1.5
More informationMULTILAYER CERAMIC CAPACITORS Middle & High Voltage Series (200V to 4kV) 0402 to 1812 Sizes NP0, X7R & Y5V Dielectrics Halogen Free & RoHS compliance
MULTILAYER CERAMIC CAPACITORS Middle & High Voltage Series (200V to 4kV) 0402 to 1812 Sizes NP0, X7R & Y5V Dielectrics Halogen Free & RoHS compliance *Contents in this sheet are subject to change without
More informationCONTENT (MLCC) E STANDARD NUMBER... 3 STRUCTURE... 4 ORDERING CODE... 4 GENERAL PURPOSE FOR SMARTPHONE... 5
MLCC MLCC CONTENT (MLCC) E STANDARD NUMBER... 3 STRUCTURE... 4 ORDERING CODE... 4 GENERAL PURPOSE FOR SMARTPHONE... 5 CLASS II: HIGH DIELECTRIC CONSTANT TYPE... 6 X5R Series... 6 TEST SPEC.... 7 PACKAGE...
More informationMULTILAYER CERAMIC CAPACITORS Open-Mode Series (50V to 630V) 0805 to 1812 Sizes X7R Dielectric Halogen Free & RoHS Compliance
MULTILAYER CERAMIC CAPACITORS Open-Mode Series (50V to 630V) 0805 to 1812 Sizes X7R Dielectric Halogen Free & RoHS Compliance *Contents in this sheet are subject to change without prior notice. Page 1
More information1W, 1206, Low Resistance Chip Resistor (Lead free / Halogen Free)
1W, 1206, (Lead free / Halogen Free) 1. Scope This specification applies to 1.6mm x 3.2mm size 1W, fixed metal film chip resistors rectangular type for use in electronic equipment. 2. Type Designation
More informationMultilayer Ceramic Chip Capacitors
HIGH VOLTAGE SERIES JARO high voltage series Multilayer Ceramic Capacitors are constructed by depositing alternative layers of ceramic dielectric materials and internal metallic electrodes, by using advanced
More informationSUNSTAR 传感与控制 TEL: FAX: Hall Sensor As of Nov SUNSTAR 自动化
As of Nov. 2004 E-MAIL: INTRODUCTION is a magnetic sensor using Hall effect, generating output voltage directly proportional to magnetic field. FEATURE AND APPLICATION Feature - SAMSUNG is highly sensitive
More informationM SERIES ULTRA HIGH Q CAPACITOR SPEC
FEATURES: - Ultra High-Q and low ESR - Extended working range for wireless products - Extended battery life of portable devices PART NUMBER DESCRIPTION 42 M 25 N R1 B C T Size Series Rated Voltage (VDC)
More informationData sheet FIXED THICK FILM CHIP RESISTORS; RECTANGULAR TYPE ANDULTRAHIGH VOLTAGE. AEC-Q200 qualified. RoHS COMPLIANCE ITEM Halogen and Antimony Free
No.: RZC K HTS 0001 /6 Date: 2017. 4. 21 Data sheet Title: FIXED THICK FILM CHIP RESISTORS; RECTANGULAR TYPE ANDULTRAHIGH VOLTAGE Style: RZC50, 63 AEC-Q200 qualified RoHS COMPLIANCE ITEM Halogen and Antimony
More informationRS INDUSTRY LIMITED. RS Chip Single ESD Suppressor APPROVAL SHEET. Customer Information. Part No. : Model No. : COMPANY PURCHASE R&D
APPROVAL SHEET Customer Information Customer : Part Name : Part No. : Model No. : COMPANY PURCHASE R&D Vendor Information Name: Part Name RS INDUSTRY LIMITED Chip ESD Part No. RS 0402-5V500S Lot No. PART
More informationDATA SHEET SURFACE-MOUNT CERAMIC MULTILAYER CAPACITORS Mid-voltage NP0/X7R
DATA SHEET SURFACE-MOUNT CERAMIC MULTILAYER CAPACITORS Mid-voltage NP0/X7R 100 V TO 630 V 0.47 pf to 470 nf RoHS compliant & Halogen Free Product Specification Product specification 2 SCOPE This specification
More informationData sheet FIXED THICK FILM CHIP RESISTORS; RECTANGULAR TYPE RMC1/32,1/20,1/16S,1/16,1/10,1/8,1/4,1/2,1. AEC-Q200 qualified (Without RMC1/32)
No.: RMC-K-HTS-0006 /11 Date: 2017. 4. 18 Data sheet Title: Style: RMC1/32,1/20,1/16S,1/16,1/10,1/8,1/4,1/2,1 AEC-Q200 qualified (Without RMC1/32) RoHS COMPLIANCE ITEM Halogen and Antimony Free Note: Stock
More informationFIXED THICK FILM CHIP RESISTORS; RECTANGULAR TYPE & HIGH OHM. RoHS COMPLIANCE ITEM Halogen and Antimony Free
Spec. No.: RHC K HTS 0001 /8 Date: 2017. 1. 10 Specification Title: FIXED THICK FILM CHIP RESISTORS; RECTANGULAR TYPE & HIGH OHM Style:,20 RoHS COMPLIANCE ITEM Halogen and Antimony Free Product specification
More informationReference Only. Spec No.JEFL243E-0010E-01 P1/9 Chip Common Mode Choke Coil Arrays DLP2ADA HL4
Spec No.JEFL243E-0010E-01 P1/9 Chip Common Mode Choke Coil Arrays DLP2ADA HL4 Reference Specification 1.Scope This reference specification applies to Chip Common Mode Choke Coil Arrays DLP2ADA Series.
More informationDATA SHEET. SURFACE MOUNT MULTILAYER CERAMIC CAPACITORS General purpose & High capacitance Class 2, X5R. 4 V TO 50 V 100 pf to 100 µf
Product Specification March 31, 2014 V.17 DATA SHEET SURFACE MOUNT MULTILAYER CERAMIC CAPACITORS General purpose & High capacitance Class 2, 4 V TO 50 V 100 pf to 100 µf RoHS compliant & Halogen free Product
More informationFERRITE CHIP BEADS SHAPE AND DIMENSIONS FEATURES APPLICATIONS ORDERING CODE CBY
FEITE CHIP BEADS OPEAATING TEMP. -4 +85 FEATUES Excellent solderability and high heat resistance for either reflow or wave soldering. No lead, ideal for SMT. Monotilithic inorganic material construction
More informationDATA SHEET SURFACE-MOUNT CERAMIC MULTILAYER CAPACITORS General purpose Class 1, NP0
DATA SHEET SURFACE-MOUNT CERAMIC MULTILAYER CAPACITORS General purpose Class 1, 16 V TO 50 V 0.22 pf to 33 nf RoHS compliant & Halogen Free Product Specification August 05, 2011 V.8 Product specification
More informationSURFACE MOUNT MONOLITHIC CHIP CAPACITORS COG AND TEMPERATURE COMPENSATING TYPES GRM36/39/40/42-6/42-2/43-2/44-1 Series
COG AND TEMPERATURE COMPENSATING TYPES GRM36/39/40/42-6/42-2/43-2/44-1 Series FEATURES Miniature size No Polarity Nickel Barrier Termination Standard highly resistant to metal migration Uniform dimensions
More informationFrelTec GmbH. Shielded SMD Power Inductors Power Choke
GmbH Mathildenstr. 10A 82319 Starnberg Germany Power Choke 11/18/2015 1/16 GmbH www.freltec.com SPECIFICATION Part Number 175 0315D * 101 * M E02 ** Type Size Value Tolerance Packing 175 : Shielded SMD
More information