Exterior MAX MAX MAX MIN MAX BS0060N-C-F

Transcription

1 Features Excellent capability of absorbing transient surge Quick response to surge voltage(ns Level) Eliminates overvoltage caused by fast rising transients Moisture sensitivity level: Level 1 Weight: 87mg Non degenerative Exterior Order Code: SMB-F ` Application information i Video Package (Top View) B006NC Agency Approvals Schematic Symbol Icon Description Compliance with 2011/65/EU Compliance with IEC : Part Number and Electrical Parameter IDRM@VDRM VS IS VT@ IT IH CO 2 Part Number µa V V ma V A ma pf MAX MAX MAX MIN MAX Absolute maximum ratings measured at TA= 25ºC RH = 45%-75% (unless otherwise noted). 1 Vs is measured at 100KV/S 2 Off-state capacitance is measured at VDC=2V,V RMS =1V,f=1MHz 1/5

2 Part Numbering System BS 0060 N C F (1) (2) ( 3) (4) (5) (1) Bencent Semiconductor Surge Arrester (2) Off-state Voltage, e.g.0060= =6V (3) Package : SMB-F (4) Rating Surge Voltage:6KV (10/700μs) (5) Flat Feet V-I Curve Mark Order Code: B006U2G B006NC B42LC B006NC: Part Number 1308 : August,2013 Parameters Definition +I VDRM IDRM VS Peak off-state voltage Off-state Current Switching Voltage IT IS IH IDRM IS Switching Current -V +V IH Holding Current VT VDRM VT On-state voltage VS IT On-state current CO Off-state capacitance - I Surge Ratings Current Waveform 2/10μs 8/20μs 10/160μs 5/320μs* 10/1000μs Voltage Waveform 2/10μs 1.2/50μs 10/160μs 10/700μs* 10/1000μs Ipp 500A 400A 200A 150A 100A -Peak pulse current rating(i PP )is repetitive and guaranteed for the life of the product; -Bencent only makes the test for 5/320μs@150A*(10/700μs@6KV), but for other IPP value derived from experience is just for reference only. Bencent will not take any obligation for these parameters, so before applying our parts, please make sure to verify the parameters listed in the above table. Thermal Considerations Symbol Parameter Value Unit Product Characteristics Lead Material Copper Alloy TJ Operating Junction Temperature Range -40 to +150 Body Material UL recognized epoxy meeting flammability classification 94V-0 TS Storage Temperature Range -60 to +150 Terminal Finish 100% Matte-Tin Plated 2/5

3 Order Code: Typical Characteristics 3/5

4 Environmental Characteristics Order Code: Testing items High temperature Reverse Bias Test High Temperature Life Test High-low Temperature Cycle test High Temperature &High Humidity Test Pressure cooker Test Resistance of soldering heat Technical standards Temperature: 150±3,Bias=80%VDRM Time:168H Temperature: 150 Time:168H Temperature: From -40 to125 Dwell time:30min,10cycles Temperature: 85,Humidity:85% Test time:168h Temperature: 121,2atm, Humidity:100% Test time:24h Temperature: 260±5 Time of dip soldering:10s,3times Note: The above testing items can be specified by customer s special request Product Dimensions A B A 5.4± ±0.012 C D B 4.4± ±0.008 C 2.0± ±0.004 D 3.3± ±0.012 Bottom view E E 0.8± ±0.012 F 0.25± ±0.002 F G G 2± ±0.012 Side view Recommended Soldering Pad A B A C B C /5

5 Reflow Profile Order Code: Reflow Condition Pb-Free assembly Temperature Min 150 C Pre Heat Temperature Max 200 C Time (min to max) Average ramp up rate(liquid)tamp (T L ) to peal secs 3 C/second max TP TL Ramp-up t P Critical Zone TL to TP T S (max) to T L - Ramp-up Rate - Temperature (T L ) Reflow (Liquid) 3 C/second max 217 C Temperature TS(max) Preheat T L Ramp-down - Temperature (T L ) seconds TS(min) Peak Temperature (T P ) 260+0/-5 C T S Time within 5 C of actual peak Temperature (T P ) Ramp-down Rate 8 15 seconds 6 C/second max 25 time to peak temper ature TL Time Time 25 C to peak Temperature (T P ) 8 minutes Max. Do not exceed 260 C Package Reel Information OUTLINE REEL (PCS) PER CARTON (PCS) REEL DIAMETERS (mm) A 3.65+/ / B 5.69+/ / d 1.5+/ / D D1 100+/ / D2 13+/ / E 1.5+/ / F 5.65+/ / P 8.0+/ / P0 4.0+/ / P1 2.0+/ / W 12.0+/ / W / / CARTON SIZE(mm) L W H TAPING 3,000 24, /5