H11AA1, H11AA3, H11AA2, H11AA4 AC Input/Phototransistor Optocouplers

Size: px

Start display at page:

Download "H11AA1, H11AA3, H11AA2, H11AA4 AC Input/Phototransistor Optocouplers"

Jane Richards
5 years ago
Views:

1 HAA, HAA3, HAA2, HAA4 AC Input/Phototransistor Optocouplers Features Bi-polar emitter input Built-in reverse polarity input protection Underwriters Laboratory (UL) recognized File #E90700 VDE approved File #E947 (ordering option 300 ) Applications AC line monitor Unknown polarity DC sensor Telephone line interface Description October 2005 The HAAX series consists of two gallium-arsenide infrared emitting diodes connected in inverse parallel driving a single silicon phototransistor output. 2 3 BASE 5 COLL 4 EMITTER HAA, HAA3, HAA2, HAA4 AC Input/Phototransistor Optocouplers Parameter Symbol Device Value Units TOTAL DEVICE Storage Temperature T STG All -55 to +50 C Operating Temperature T OPR All -55 to +00 C Lead Solder Temperature T SOL All 20 for 0 sec C Total Device Power Dissipation P D All 350 mw Derate Linearly From 25 C 4. mw/ C EMITTER Continuous Forward Current I F All 00 ma Forward Current - Peak ( µs pulse, 300 pps) I F(pk) All ±.0 A LED Power Dissipation P D All 200 mw Derate Linearly From 25 C 2. mw/ C DETECTOR Detector Power Dissipation P D All 300 mw Derate above 25 C 4.0 mw/ C 2005 Fairchild Semiconductor Corporation HAA, HAA3, HAA2, HAA4 Rev..0.0

2 Electrical Characteristics (T A = 25 C Unless otherwise specified.) Individual Component Characteristics Parameter Test Conditions Symbol Device Min Typ Max Unit EMITTER Input Forward Voltage I F = ±0 ma V F All.2.5 V Capacitance V F = 0 V, f =.0 MHz C J All 80 pf DETECTOR Breakdown Voltage I C =.0 ma, I F = 0 BV CEO All 30 V Collector to Base I C = 00 µa, I F = 0 BV CBO All 70 V Emitter to Base I E = 00 µa, I F = 0 BV EBO All 5 V Emitter to Collector I E = 00 µa, I F = 0 BV ECO All 7 V Leakage Current V CE = 0 V, I F = 0 I CEO HAA,3,4 50 na HAA2 200 Capacitance V CE = 0, f = MHz C CE All 0 pf Collector to Base V CE = 0, f = MHz C CB All 80 pf Emitter to Base V CE = 0, f = MHz C EB All 5 pf Transfer Characteristics (T A = 25 C Unless otherwise specified.) Characteristics Test Conditions Symbol Device Min Typ Max Units Current Transfer Ratio, I F = ±0 ma, V CE = 0 V CTR CE HAA4 00 % HAA3 50 HAA 20 HAA2 0 Current Transfer Ratio, Symmetry I F = ±0 ma, V CE = 0 V (Figure.8) All Saturation Voltage I F = ±0 ma, I CE = 0.5 ma V CE(SAT) All.40 V Isolation Characteristics Characteristic Test Conditions Symbol Min Typ Max Units Package Capacitance input/output V I-O = 0, f = MHz C I-O 0.7 pf Isolation Voltage f = 0 Hz, t = min. V ISO 5300 VAC(RMS) Isolation Resistance V I-O = 500 VDC R ISO 0 Ω HAA, HAA3, HAA2, HAA4 AC Input/Phototransistor Optocouplers HAA, HAA3, HAA2, HAA4 Rev

3 NORMALIZED CTR NORMALIZED CTR I F - INPUT CURRENT (ma) Fig. 3 Normalized CTR vs. Ambient Temperature Normalized to I F = 0 ma T A = 25 C Fig. Input Voltage vs. Input Current V F - INPUT VOLTAGE (V) I F = 20 ma I F = 0 ma I F = 5 ma T A - AMBIENT TEMPERATURE ( C) NORMALIZED CTR ( CTRRBE / CTRRBE(OPEN)) Fig. 2 Normalized CTR vs. Forward Current V CE = 5.0V T A = 25 C I F - FORWARD CURRENT (ma) Fig. 4 CTR vs. RBE (Unsaturated) I F = 20 ma I F = 0 ma I F = 5 ma R BE - BASE RESISTANCE (k) Normalized to I F = 0 ma V CE = 5.0 V HAA, HAA3, HAA2, HAA4 AC Input/Phototransistor Optocouplers NORMALIZED CTR ( CTRRBE / CTRRBE(OPEN)) Fig. 5 CTR vs. RBE (Saturated) I F = 20 ma I F = 0 ma I F = 5 ma R BE - BASE RESISTANCE (k) V CE = 0.3 V VCE (SAT) - COLLECTOR-EMITTER SATURATION VOLTAGE (V) Fig. Collector-Emitter Saturation Voltage vs Collector Current I F = 5 ma I F = 2.5 ma I F = 0 ma T A = 25 C I C - COLLECTOR CURRENT (ma) I F = 20 ma HAA, HAA3, HAA2, HAA4 Rev

4 NORMALIZED ton - (ton(rbe) / ton(open)) SWITCHING SPEED - (µs) NORMALIZED toff - (toff(rbe) / toff(open)) NORMALIZED OUTPUT CURRENT I CEO - COLLECTOR -EMITTER DARK CURRENT (na) Fig. 7 Switching Speed vs. Load Resistor I F = 0 ma V CC = 0 V T A = 25 C T off T on T r T f R-LOAD RESISTOR (k Fig. 9 Normalized t off vs. R BE R BE - BASE RESISTANCE (k) V CC = 0 V I C = 2 ma R L = Fig. 8 Normalized t on vs. R BE R BE - BASE RESISTANCE (k V CC = 0 V I C = 2 ma R L = 00 Fig. 0 Dark Current vs. Ambient Temperature V CE = 0 V T A = 25 C T A - AMBIENT TEMPERATURE ( C) HAA, HAA3, HAA2, HAA4 AC Input/Phototransistor Optocouplers Fig. Output Symmetry Characteristics I F = I - 0mA I I F = I 0mA I NORMALIZED TO: V CE = 0 V I F = 0 ma THE MAXIMUM PEAK OUTPUT CURRENT WILL BE NO MORE THAN THREE TIMES THE MINIMUM PEAK OUTPUT CURRENT AT I F = ±0 ma V CE - COLLECTOR TO EMITTER VOLTAGE (V) HAA, HAA3, HAA2, HAA4 Rev

5 Package Dimensions (Through Hole) SEATING PLANE (.78) (.4) (5.08) 0.35 (3.43) 0.54 (3.90) 0.00 (2.54) (0.5) 0.0 () 0.00 (2.54) (8.89) (8.38) PIN ID (0.5) MIN 0.0 (0) (0.20) 0 to (.8) (.0) (7.2) Package Dimensions ("Lead Spacing) SEATING PLANE (5.08) 0.35 (3.43) 0.54 (3.90) 0.00 (2.54) (8.89) (8.38) (.78) (.4) (0.0) MIN (.8) (.0) 0.0 (0) (0.20) Package Dimensions (Surface Mount) (5.08) 0.5 (4.8) (0.5) 0.0 () (8.89) (8.38) (.78) (.4) PIN ID (0.5) MIN 0.00 (2.54) Lead Coplanarity : (0.0) MAX (.8) (.0) (7.2) 0.0 (0) MIN 0.35 (8.00) MIN 05 (0.30) MAX Recommended Pad Layout for Surface Mount Leadform 5 (0.54) (7.49) 0.00 (2.54) (.78) 0.0 () (0.20) 0.00 (.52) (0.7) HAA, HAA3, HAA2, HAA4 AC Input/Phototransistor Optocouplers (0.5) 0.0 () 0.00 (2.54) 00 (0.) 0 to 5 Note All dimensions are in inches (millimeters) HAA, HAA3, HAA2, HAA4 Rev

6 Ordering Information Option Order Entry Identifier Description S.S Surface Mount Lead Bend SD.SD Surface Mount; Tape and Reel W.W Lead Spacing VDE W.300W VDE 0884, Lead Spacing 3S.3S VDE 0884, Surface Mount 3SD.3SD VDE 0884, Surface Mount, Tape and Reel Carrier Tape Specifications ( D Taping Orientation) 2.0 ± ± ± 0. Ø.55 ± ± ± ± ± ± ± ± MAX 0.30 ± 0.20 Ø. ± 0. User Direction of Feed Note All dimensions are in millimeters HAA, HAA3, HAA2, HAA4 AC Input/Phototransistor Optocouplers HAA, HAA3, HAA2, HAA4 Rev

7 Marking Information Definitions Reflow Profile (Black Package, No Suffix) Temperature ( C) C peak Ramp up = 3C/sec HAA V XX YY K Fairchild logo 2 Device number 3 VDE mark (Note: Only appears on parts ordered with VDE option See order entry table) 4 Two digit year code, e.g., 03 5 Two digit work week ranging from 0 to 53 Assembly package code Time (Minute) 25 C, 0 30 s Time above 83 C, 0 50 sec Peak reflow temperature: 225 C (package surface temperature) Time of temperature higher than 83 C for 0 50 seconds One time soldering reflow is recommended HAA, HAA3, HAA2, HAA4 AC Input/Phototransistor Optocouplers HAA, HAA3, HAA2, HAA4 Rev

8 TRADEMARKS The following are registered and unregistered trademarks Fairchild Semiconductor owns or is authorized to use and is not intended to be an exhaustive list of all such trademarks. ACEx FAST ActiveArray FASTr Bottomless FPS Build it Now FRFET CoolFET GlobalOptoisolator CROSSVOLT GTO DOME HiSeC EcoSPARK I 2 C E 2 CMOS i-lo EnSigna ImpliedDisconnect FACT IntelliMAX FACT Quiet Series Across the board. Around the world. The Power Franchise Programmable Active Droop DISCLAIMER FAIRCHILD SEMICONDUCTOR RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER NOTICE TO ANY PRODUCTS HEREIN TO IMPROVE RELIABILITY, FUNCTION OR DESIGN. FAIRCHILD DOES NOT ASSUME ANY LIABILITY ARISING OUT OF THE APPLICATION OR USE OF ANY PRODUCT OR CIRCUIT DESCRIBED HEREIN; NEITHER DOES IT CONVEY ANY LICENSE UNDER ITS PATENT RIGHTS, NOR THE RIGHTS OF OTHERS. LIFE SUPPORT POLICY FAIRCHILD S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF FAIRCHILD SEMICONDUCTOR CORPORATION. As used herein:. Life support devices or systems are devices or systems which, (a) are intended for surgical implant into the body, or (b) support or sustain life, or (c) whose failure to perform when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in significant injury to the user. PRODUCT STATUS DEFINITIONS ISOPLANAR LittleFET MICROCOUPLER MicroFET MicroPak MICROWIRE MSX MSXPro OCX OCXPro OPTOLOGIC OPTOPLANAR PACMAN POP Power247 PowerEdge PowerSaver PowerTrench QFET QS QT Optoelectronics Quiet Series RapidConfigure RapidConnect µserdes SILENT SWITCHER SMART START SPM Stealth SuperFET SuperSOT -3 SuperSOT - SuperSOT -8 SyncFET TinyLogic TINYOPTO TruTranslation UHC UltraFET UniFET VCX Wire 2. A critical component is any component of a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness. HAA, HAA3, HAA2, HAA4 AC Input/Phototransistor Optocouplers Definition of Terms Datasheet Identification Product Status Definition Advance Information Preliminary No Identification Needed Formative or In Design First Production Full Production This datasheet contains the design specifications for product development. Specifications may change in any manner without notice. This datasheet contains preliminary data, and supplementary data will be published at a later date. Fairchild Semiconductor reserves the right to make changes at any time without notice in order to improve design. This datasheet contains final specifications. Fairchild Semiconductor reserves the right to make changes at any time without notice in order to improve design. Obsolete Not In Production This datasheet contains specifications on a product that has been discontinued by Fairchild semiconductor. The datasheet is printed for reference information only. Rev. I HAA, HAA3, HAA2, HAA4 Rev

CNY17-1, CNY17-3, CNY17-2, CNY17-4 Phototransistor Optocouplers

CNY17-1, CNY17-3, CNY17-2, CNY17-4 Phototransistor Optocouplers CNY7-, CNY7-3, CNY7-2, CNY7-4 Phototransistor Optocouplers Features CNY7-/2/3 are also available in white package by specifying -M suffix (eg. CNY7-2-M) UL recognized (File # E90700) VDE recognized 02497