IntesisBox KNX HA-AC-KNX-8/16/64 v1.0

Size: px

Start display at page:

Download "IntesisBox KNX HA-AC-KNX-8/16/64 v1.0"

Amanda Harper
5 years ago
Views:

1 IntesisBx KNX HA-AC-KNX-8/16/64 v1.0 User's Manual r1 eng Issue Date: 11/2017

2 IntesisBx KNX - Haier A.C. (VRF line) Interface fr integratin f Haier air cnditiners int KNX TP-1 (EIB) cntrl systems. Cmpatible with VRF air cnditiners line cmmercialized by Haier. Applicatin s Prgram Versin: 1.0 Order Cde: HA-AC-KNX-8 HA-AC-KNX-16 HA-AC-KNX-64 Intesis Sftware S.L.U. - All rights reserved This infrmatin is subject t change withut ntice IntesisBx is a registred trademark f Intesis Sftware SLU inf@intesisbx.cm 2 / 31

3 IntesisBx KNX - Haier A.C. (VRF line) Intesis Sftware S.L.U All Rights Reserved. Infrmatin in this dcument is subject t change withut ntice. The sftware described in this dcument is furnished under a license agreement r nndisclsure agreement. The sftware may be used nly in accrdance with the terms f thse agreements. N part f this publicatin may be reprduced, stred in a retrieval system r transmitted in any frm r any means electrnic r mechanical, including phtcpying and recrding fr any purpse ther than the purchaser s persnal use withut the written permissin f Intesis Sftware S.L. Intesis Sftware S.L.U. Milà i Fntanals, 1 bis Igualada Spain TRADEMARKS All trademarks and trade names used in this dcument are acknwledged t be the cpyright f their respective hlders. Intesis Sftware S.L.U. - All rights reserved This infrmatin is subject t change withut ntice IntesisBx is a registred trademark f Intesis Sftware SLU inf@intesisbx.cm 3 / 31

4 IntesisBx KNX - Haier A.C. (VRF line) INDEX 1 Presentatin Cnnectin Cnfiguratin and setup ETS Parameters General cnfiguratin Dwnlad latest database entry fr this prduct and its User Manual frm: Intesis Prduct Number f Indr Units in ETS First Status Updated t KNX Enable bject Errr Cde [2byte] Enable bject Errr Text Cde [14byte] Glbal mde cnfiguratin Enable use f Operating Mde bjects Enable use f Mde Heat/Cl bjects Enable use f + / - bject fr Mde Enable use f bit-type Mde bjects (fr cntrl) Enable use f bit-type Mde bjects (fr status) Enable use f Text bject fr Mde Glbal Fan Speed Cnfiguratin dialg DPT bject type fr fan speed Enable use f Fan Speed Man/Aut bjects (fr Cntrl and Status) Enable use f +/- bject fr Fan Speed Enable use f bit-type Fan Speed bjects (fr Cntrl) Enable use f bit-type Fan Speed bjects (fr Status) Enable use f Text bject fr Fan Speed Glbal temperature cnfiguratin Enable use f +/- bj fr Setpint Ambient Ref. Temp. is prvided frm KNX Cntrl Mde cnfiguratin Enable use f Cntrl Mde bjects (fr Cntrl and Status) Initial state f Cntrl Mde Addressing f Indr Units License Technical Specificatins AC Unit Types cmpatibility Errr Cdes Appendix A Cmmunicatin Objects Table Intesis Sftware S.L.U. - All rights reserved This infrmatin is subject t change withut ntice IntesisBx is a registred trademark f Intesis Sftware SLU inf@intesisbx.cm 4 / 31

IntesisBx KNX - Haier A.C. (VRF line) 1 Presentatin HA-AC-KNX-8/16/64 allws a cmplete and natural integratin f Haier air cnditiners with KNX cntrl systems.

Direct cnnectin t the KNX EIB bus. Direct cnnectin t the AC indr unit. Fully KNX interperable, cnfiguratin frm ETS. Multiple bjects fr cntrl (f different types: bit, byte, characters ).

5 IntesisBx KNX - Haier A.C. (VRF line) 1 Presentatin HA-AC-KNX-8/16/64 allws a cmplete and natural integratin f Haier air cnditiners with KNX cntrl systems. Cmpatible with all mdels f VRF line f Haier air cnditiners. Main features: Reduced dimensins. Installatin even inside the A.C. indr unit. Quick and nn-visible installatin. External pwer nt required. Direct cnnectin t the KNX EIB bus. Direct cnnectin t the AC indr unit. Fully KNX interperable, cnfiguratin frm ETS. Multiple bjects fr cntrl (f different types: bit, byte, characters ). Cntrl f the AC unit based in the ambient temperature read by the wn AC unit, r in the ambient temperature read by any KNX thermstat. Ttal Cntrl and Mnitring f the AC unit frm KNX, including mnitring f AC unit s state f internal variables, running hurs cunter (fr filter maintenance cntrl), and errr indicatin and errr cde. AC unit can be cntrlled simultaneusly by the IR remte cntrl f the AC unit and by KNX. Intesis Sftware S.L.U. - All rights reserved This infrmatin is subject t change withut ntice IntesisBx is a registred trademark f Intesis Sftware SLU inf@intesisbx.cm 5 / 31

6 IntesisBx KNX - Haier A.C. (VRF line) 2 Cnnectin Cnnectin f the interface t the AC indr unit: Discnnect mains pwer frm the AC unit. Open the frnt cver f the indr unit in rder t have access t the internal cntrl bard. In the cntrl bard lcate the scket cnnectr marked as ABG1. Using a 3-wire cable, cnnect the ABG1 cnnectr frm the HA-AC-KNX-8/16/64 t the A B G1 cnnectr f the AC unit's cntrl bard. Fix the HA-AC-KNX-8/16/64 inside r utside the AC indr unit depending n yur needs remember that HA-AC-KNX-8/16/64 must be als cnnected t the KNX bus. Clse the AC indr unit's frnt cver again. Cnnectin f the interface t the KNX bus: Discnnect pwer f the KNX bus. Cnnect the interface t the KNX TP-1 (EIB) bus using the KNX standard cnnectr (red/grey) f the interface, respect plarity. Recnnect pwer f the KNX bus. Cnnectins diagram: Haier Cmmunicatin Adaptr Adaptadr de Cmunicación Haier HA-MA164AD HA-MB164AD HA-MC164AD KNX KNX TP-1 (EIB) bus PROG Haier Outdr Unit Unidad Exterir Haier A U3 Internal electrnic cntrl bard U2 A B G1 AC Unit A B HA-AC-KNX-x Cnnectin t ABG1 bus. Three wires cable. Cnexión al bus ABG1. Cable de tres hils. B G1 Max. 500 m Figure 2.1 Default parameter cnfiguratin Each Haier Cmmunicatin Adaptr cnnects t a single Outdr Unit. The HA-AC-KNX can be cnnected t mre than ne Haier Cmmunicatin Adaptr simultaneusly. NOTE: Mre than ne Haier Cmmunicatin Adaptr can be present in the installatin. Please make sure that the address f the Haier Cmmunicatin Adaptr is crrectly set in the ETS. Check sectin 4.6 fr mre infrmatin. Intesis Sftware S.L.U. - All rights reserved This infrmatin is subject t change withut ntice IntesisBx is a registred trademark f Intesis Sftware SLU inf@intesisbx.cm 6 / 31

7 IntesisBx KNX - Haier A.C. (VRF line) 3 Cnfiguratin and setup This is a fully cmpatible KNX device which must be cnfigured and setup using standard KNX tl ETS. ETS prject fr this device can be dwnladed frm: Please cnsult the README.txt file, lcated inside the dwnladed zip file, t find instructins n hw t install the database. Intesis Sftware S.L.U. - All rights reserved This infrmatin is subject t change withut ntice IntesisBx is a registred trademark f Intesis Sftware SLU inf@intesisbx.cm 7 / 31

IntesisBx KNX - Haier A.C. (VRF line) 4 ETS Parameters When imprted t the ETS sftware fr the first time, the gateway shws the fllwing default parameter cnfiguratin: Figure 4.

8 IntesisBx KNX - Haier A.C. (VRF line) 4 ETS Parameters When imprted t the ETS sftware fr the first time, the gateway shws the fllwing default parameter cnfiguratin: Figure 4.1 Default parameter cnfiguratin With this cnfiguratin it s pssible t send On/Off (Cntrl_ On/Off), change the AC Mde (Cntrl_ Mde), the Fan Speed (Cntrl_ Fan Speed) and als the Setpint Temperature (Cntrl_ Setpint Temperature). The Status_ bjects, fr the mentined Cntrl_ bjects, are als available t use if needed. Objects Status_ AC Ambient Reference Temperature and Status_ Errr/Alarm are shwn t. Figure 4.2 Default cmmunicatin bjects Intesis Sftware S.L.U. - All rights reserved This infrmatin is subject t change withut ntice IntesisBx is a registred trademark f Intesis Sftware SLU inf@intesisbx.cm 8 / 31

9 IntesisBx KNX - Haier A.C. (VRF line) 4.1 General cnfiguratin Inside this parameter s dialg it is pssible t activate r change the parameters shwn in the Figure Dwnlad latest database entry fr this prduct and its User Manual frm: The first field shws the where t dwnlad the database and the user manual fr the prduct. Figure 4.3 Parameter detail Intesis Prduct This parameter is used t check, befre sending the prgraming, the maximum number f AC units yur device supprts. Figure 4.4 Parameter detail Select the versin f the gateway that yu have: HA-AC-KNX-8, if yu nly want t cntrl up t 8 AC unit. HA-AC-KNX-16, if yu nly want t cntrl up t 16 AC units. HA-AC-KNX-64, if yu nly want t cntrl up t 64 AC units Number f Indr Units in ETS This parameter is used t hide/shw cmmunicatin bject accrding t the number f AC units yu need t cnfigure. Value ranges g frm 1 t 64. Figure 4.5 Parameter detail In case yu intrduce a number higher than the maximum number f units allwed by yur license, yu will get a warning message. This is just fr infrmatin and will nt blck the cnfiguratin prcess. Cnfiguratins with mre indr units cnfigured than the nes allwed by the license will nt be dwnladed crrectly. Figure 4.6 Parameter detail Intesis Sftware S.L.U. - All rights reserved This infrmatin is subject t change withut ntice IntesisBx is a registred trademark f Intesis Sftware SLU inf@intesisbx.cm 9 / 31

10 IntesisBx KNX - Haier A.C. (VRF line) First Status Updated t KNX This parameter defines hw fast the status is updated t KNX. Depending n the value selected, mre r less pririty will be assigned t this actin. As there are s many parameters available, it is imprtant t cnsider carefully hw t set this parameter. If set t ASAP, all status cmmunicatin bjects will send its value (if needed). If set t Slw, all status cmmunicatin bjects will send its value (if needed), but slwer than in the previus ptin (ASAP). If set t Super Slw, all status cmmunicatin bjects will send its value (if needed), but slwer than in the previus ptin (Slw). Figure 4.7 Parameter detail Enable bject Errr Cde [2byte] This parameter shws/hides the Status_ Errr Cde cmmunicatin bject which shws the indr unit errrs, if ccurred, in numeric frmat. 43: Figure 4.8 Cmmunicatin bject and parameter detail If set t Disabled the bject will nt be shwn. If set t Enabled the Status_ Errr Cde [2byte signed value] bject will appear. This bject can be read and als sends the indr unit errr, if ccurred, in numeric frmat. If a 0 value is shwn that means n errr Enable bject Errr Text Cde [14byte] This parameter shws/hides the Status_ Errr Text Cde cmmunicatin bject which shws the indr unit errrs, if ccurred, in text frmat. 44: Figure 4.9 Cmmunicatin bject and parameter detail If set t Disabled the bject will nt be shwn. If set t Enabled the Status_ Errr Text Cde bject will appear. Intesis Sftware S.L.U. - All rights reserved This infrmatin is subject t change withut ntice IntesisBx is a registred trademark f Intesis Sftware SLU inf@intesisbx.cm 10 / 31

11 IntesisBx KNX - Haier A.C. (VRF line) This bject can be read and als sends the indr unit errr, if ccurred, in text frmat. The errrs shwn have the same frmat as in the remte cntrller and in the errr list frm the indr unit manufacturer. If the bject s value is empty, that means there is n errr. 4.2 Glbal mde cnfiguratin Figure 4.10 Default Mde Cnfiguratin dialg All the parameters in this sectin are related with the different mde prperties and cmmunicatin bjects. 3: 26: The byte-type cmmunicatin bject fr Mde wrks with the DTP_ Aut mde will be enabled with a 0 value, Heat mde with a 1 value, Cl mde with a 3 value, Fan mde with a 9 value and Dry mde with a 14 value Enable use f Operating Mde bjects This parameter shws/hides the Cntrl_ and Status_ Mde Operating Mde cmmunicatin bjects. 2: 25: Enable use f Mde Heat/Cl bjects This parameter shws/hides the Cntrl_ and Status_ Mde Cl/Heat cmmunicatin bjects. 4: 27: If set t Disabled the bjects will nt be shwn. Intesis Sftware S.L.U. - All rights reserved This infrmatin is subject t change withut ntice IntesisBx is a registred trademark f Intesis Sftware SLU inf@intesisbx.cm 11 / 31

12 IntesisBx KNX - Haier A.C. (VRF line) If set t Enabled the Cntrl_ and Status_ Mde Cl/Heat bjects will appear. When a 1 value is sent t the Cntrl_ cmmunicatin bject, Heat mde will be enabled in the indr unit, and the Status_ bject will return this value. When a 0 value is sent t the Cntrl_ cmmunicatin bject, Cl mde will be enabled in the indr unit, and the Status_ bject will return this value Enable use f + / - bject fr Mde This parameter shws/hides the Cntrl_ Mde +/- cmmunicatin bject which let s yu change the indr unit mde by using tw different datapint types. 10: If set t Disabled the bject will nt be shwn. If set t Enabled the Cntrl_ Mde +/- bject and a new parameter will appear. Figure 4.11 Parameter detail DPT type fr +/- Mde Object This parameter lets chse between the datapints 0-Up / 1-Dwn [DPT_1.008] and 0-Decrease / 1-Increase [DPT_1.007] fr the Cntrl_ Mde +/- bject. The sequence fllwed when using this bject is shwn belw: AUTO HEAT COOL FAN DRY Up / Increase Dwn / Decrease Keep in mind that depending n the indr unit yu have and the available features, Aut mde and Dry mde may nt be present Enable use f bit-type Mde bjects (fr cntrl) This parameter shws/hides the bit-type Cntrl_ Mde bjects. 5: 6: 7: 8: Intesis Sftware S.L.U. - All rights reserved This infrmatin is subject t change withut ntice IntesisBx is a registred trademark f Intesis Sftware SLU inf@intesisbx.cm 12 / 31

13 IntesisBx KNX - Haier A.C. (VRF line) 9: If set t n the bjects will nt be shwn. If set t yes the Cntrl_ Mde bjects fr Aut, Heat, Cl, Fan and Dry will appear. T activate a mde by using these bjects a 1 value has t be sent Enable use f bit-type Mde bjects (fr status) This parameter shws/hides the bit-type Status_ Mde bjects. 28: 29: 30: 31: 32: If set t n the bjects will nt be shwn. If set t yes the Status_ Mde bjects fr Aut, Heat, Cl, Fan and Dry will appear. When enabled, a mde will return a 1 thrugh its bit-type bject Enable use f Text bject fr Mde This parameter shws/hides the Status_ Mde Text cmmunicatin bject. 33: If set t n the bject will nt be shwn. If set t yes the Status_ Mde Text bject will appear. Als, in the parameters, will be shwn five text fields, ne fr each mde, that will let mdify the text string displayed by the Status_ Mde Text when changing mde. Figure 4.12 Parameter detail Intesis Sftware S.L.U. - All rights reserved This infrmatin is subject t change withut ntice IntesisBx is a registred trademark f Intesis Sftware SLU inf@intesisbx.cm 13 / 31

14 IntesisBx KNX - Haier A.C. (VRF line) 4.3 Glbal Fan Speed Cnfiguratin dialg Figure 4.13 Default Fan Speed Cnfiguratin dialg All the parameters in this sectin are related with the Fan Speed prperties and cmmunicatin bjects DPT bject type fr fan speed With this parameter is pssible t change de DPT fr the Cntrl_ Fan Speed and Status_ Fan Speed byte-type cmmunicatin bjects. Datapints Scaling (DPT_5.001) and Enumerated (DPT_5.010) can be selected. When Enumerated [DPT 5.010] is selected, Cntrl_ Fan Speed and Status_ Fan Speed cmmunicatin bjects fr this DPT will appear. Als, depending n the number f fan speeds selected, these bjects will be different. 11: 34: The first fan speed will be selected if a 1 is sent t the Cntrl_ bject. The secnd ne will be selected sending a 2, and the last ne sending a 3. The Status_ bject will always return the value fr the fan speed selected. Imprtant: If a 0 value is sent t the Cntrl_ bject, the minimum fan speed will be selected. If a value bigger than 3 is sent t the Cntrl_ bject, then the maximum fan speed will be selected. When Scaling [DPT 5.001] is selected, Cntrl_ Fan Speed and Status_ Fan Speed cmmunicatin bjects fr this DPT will appear. Als, depending n the number f fan speeds selected, these bjects will be different. 11: 34: Intesis Sftware S.L.U. - All rights reserved This infrmatin is subject t change withut ntice IntesisBx is a registred trademark f Intesis Sftware SLU inf@intesisbx.cm 14 / 31

15 IntesisBx KNX - Haier A.C. (VRF line) When a value between 0% and 49% is sent t the Cntrl_ bject the first fan speed will be selected. When a value between 50% and 83% is sent t the Cntrl_ bject, the secnd speed will be selected. When a value between 84% and 100% is sent t the Cntrl_ bject, the third speed will be selected. The Status_ bject will return a 33% when the first speed is selected, a 67% fr the secnd ne and a 100% fr the third ne. Cntrl_ Cntrl_ Cntrl_ Fan Speed 1 Fan Speed 2 Fan Speed 3 0% 33% 50% 67% 83% 100% Status_ Status_ Status_ Enable use f Fan Speed Man/Aut bjects (fr Cntrl and Status) This parameter shws/hides the Cntrl_ Fan Speed Man/Aut and Status_ Fan Speed Man/Aut cmmunicatin bject which lets yu set the Fan Speed int Manual r Aut mde. 12: 35: Enable use f +/- bject fr Fan Speed This parameter shws/hides the Cntrl_ Fan Speed +/- cmmunicatin bject which lets yu increase/decrease the indr unit fan speed by using tw different datapint types. 16: If set t n the bject will nt be shwn. If set t yes the Cntrl_ Fan Speed +/- bject and a new parameter will appear. Figure 4.14 Parameter detail Fan speed +/- peratin This parameter lets chse between the datapints 0-Up / 1-Dwn [DPT_1.008] and 0-Decrease / 1-Increase [DPT_1.007] fr the Cntrl_ Fan Speed +/- bject. Intesis Sftware S.L.U. - All rights reserved This infrmatin is subject t change withut ntice IntesisBx is a registred trademark f Intesis Sftware SLU inf@intesisbx.cm 15 / 31

16 IntesisBx KNX - Haier A.C. (VRF line) Sequence fr +/- bject This parameter lets chse between the different mdes available: S1>S2>.>SN Select this ptin if yu dn t have Aut mde and yu dn t want rll-ver t be enabled. S1>S2>.>SN>S1> Select this ptin if yu dn t have Aut mde and yu want rll-ver t be enabled. Aut>S1>S2>.>SN Select this ptin if yu have Aut mde and yu dn t want rll-ver t be enabled. Aut>S1>S2>.>SN>Aut>S1> Select this ptin if yu have Aut mde and yu want rll-ver t be enabled. Only if Rll-ver is enabled Fan Speed 1 Fan Speed 2 Fan Speed 3 Only if Rll-ver is enabled Up / Increase Dwn / Decrease Enable use f bit-type Fan Speed bjects (fr Cntrl) This parameter shws/hides the bit-type Cntrl_ Fan Speed bjects. 13: 14: 15: If set t n the bjects will nt be shwn. If set t yes the Cntrl_ Fan Speed bjects fr Speed 1, Speed 2 and Speed 3 (if available) will appear. T activate a Fan Speed by using these bjects a 1 value has t be sent. Intesis Sftware S.L.U. - All rights reserved This infrmatin is subject t change withut ntice IntesisBx is a registred trademark f Intesis Sftware SLU inf@intesisbx.cm 16 / 31

17 IntesisBx KNX - Haier A.C. (VRF line) Enable use f bit-type Fan Speed bjects (fr Status) This parameter shws/hides the bit-type Status_ Fan Speed bjects. 36: 37: 38: If set t n the bjects will nt be shwn. If set t yes the Status_ Fan Speed bjects fr Speed 1, Speed 2 and Speed 3 (if available) will appear. When a Fan Speed is enabled, a 1 value is returned thrugh its bittype bject Enable use f Text bject fr Fan Speed This parameter shws/hides the Status_ Fan Speed Text cmmunicatin bject. 39: If set t n the bject will nt be shwn. If set t yes the Status_ Fan Speed Text bject will appear. Als, in the parameters, will be shwn tw (r three, depending n the number f fan speeds selected) text fields, ne fr each Fan Speed, that will let mdify the text string displayed by the Status_ Fan Speed Text when changing a fan speed. Figure 4.15 Parameter detail Intesis Sftware S.L.U. - All rights reserved This infrmatin is subject t change withut ntice IntesisBx is a registred trademark f Intesis Sftware SLU inf@intesisbx.cm 17 / 31

18 IntesisBx KNX - Haier A.C. (VRF line) 4.4 Glbal temperature cnfiguratin Figure 4.20 Default Temperature Cnfiguratin dialg All the parameters in this sectin are related with the Temperature prperties and cmmunicatin bjects Enable use f +/- bj fr Setpint This parameter shws/hides the Cntrl_ Setpint Temp +/- cmmunicatin bject which lets yu change the indr unit setpint temperature by using tw different datapint types. 18: If set t n the bject will nt be shwn. If set t yes the Cntrl_ Setpint Temp +/- bject and a new parameter will appear. Figure 4.23 Parameter detail DPT type fr +/- Setp Temp bject This parameter lets chse between the datapints 0-Up / 1-Dwn [DPT_1.008] and 0-Decrease / 1-Increase [DPT_1.007] fr the Cntrl_ Setpint Temp +/- bject. (Lwer limit) 16ºC 17ºC 31ºC 32ºC (Upper limit) Up / Increase Dwn / Decrease Ambient Ref. Temp. is prvided frm KNX Intesis Sftware S.L.U. - All rights reserved This infrmatin is subject t change withut ntice IntesisBx is a registred trademark f Intesis Sftware SLU inf@intesisbx.cm 18 / 31

19 IntesisBx KNX - Haier A.C. (VRF line) This parameter shws/hides the Cntrl_ Ambient Temperature cmmunicatin bject which lets yu use an ambient temperature reference prvided by a KNX device. 19: If set t n the bject will nt be shwn. If set t yes the Cntrl_ Ambient Temperature bject will appear. Meant t be enabled when yu want the temperature prvided by a KNX sensr t be the reference ambient temperature fr the air cnditiner. Then, the fllwing frmula applies fr the calculatin f real Cntrl_ Setpint Temperature sent t the AC unit: AC Setp. Temp = Ambient ref. Temp - ( KNX Amb. Temp. - KNX Setp Temp. ) AC Setp. Temp: AC indr unit setpint temperature Ambient Ref. Temp: AC indr unit return temperature KNX Amb. Temp.: Ambient temperature prvided frm KNX KNX Setp. Temp: Setpint temperature prvided frm KNX As an example, cnsider the fllwing situatin: User wants: 19ºC ( KNX Setp. Temp. ) User sensr (a KNX sensr) reads: 21ºC ( KNX Amb Temp. ) Ambient temp. read by Haier system is: 24ºC ( Ambient Ref. Temp ) In this example, the final setpint temperature that HA-AC-KNX-8/16/64 will send ut t the indr unit (shwn in Setp. Temp. ) will becme 24ºC (21ºC - 19ºC) = 22ºC. This is the setpint that will actually be requested t Haier unit. This frmula will be applied as sn as the Cntrl_ Setpint Temperature and Cntrl_ Ambient Temperature bjects are written at least nce frm the KNX installatin. After that, they are kept always cnsistent. Nte that this frmula will always drive the AC indr unit demand in the right directin, regardless f the peratin mde (Heat, Cl r Aut). Intesis Sftware S.L.U. - All rights reserved This infrmatin is subject t change withut ntice IntesisBx is a registred trademark f Intesis Sftware SLU inf@intesisbx.cm 19 / 31

20 IntesisBx KNX - Haier A.C. (VRF line) 4.5 Cntrl Mde cnfiguratin Figure 4.20 Cntrl Mde Cnfiguratin dialg All the parameters in this sectin are related with the Mde prperties and cmmunicatin bjects Enable use f Cntrl Mde bjects (fr Cntrl and Status) This parameter shws/hides the Cntrl_ Cntrl Mde and Status_ Cntrl Mde cmmunicatin bjects which lets yu change the indr unit cntrl: N Central, LIFO (Last Input First Output), Central Cntrller and Lck Central Cntrller. 20: 21: 22: 23: 45: 46: 47: 48: If set t n the bjects will nt be shwn. If set t yes the Cntrl_ and Status_ Cntrl Mde bjects fr N Central, LIFO (Last Input First Output), Central Cntrller, Lck Central Cntrller will appear Initial state f Cntrl Mde This parameter sets the initial value fr the Cntrl Mde: N Central, LIFO (Last Input First Output), Central Cntrller, Lck Central Cntrller r D nt initialize. Intesis Sftware S.L.U. - All rights reserved This infrmatin is subject t change withut ntice IntesisBx is a registred trademark f Intesis Sftware SLU inf@intesisbx.cm 20 / 31

IntesisBx KNX - Haier A.C. (VRF line) Figure 4.24 Parameter detail If set t Apply same initial state t all Indr Units, the parameter ptin selected will apply t all indr units.

21 IntesisBx KNX - Haier A.C. (VRF line) Figure 4.24 Parameter detail If set t Apply same initial state t all Indr Units, the parameter ptin selected will apply t all indr units. If set t Initial state fr each Indr Unit might differ, yu will be able t set this parameter fr each Indr Unit individually. Intesis Sftware S.L.U. - All rights reserved This infrmatin is subject t change withut ntice IntesisBx is a registred trademark f Intesis Sftware SLU inf@intesisbx.cm 21 / 31

22 IntesisBx KNX - Haier A.C. (VRF line) 4.6 Addressing f Indr Units Figure 4.24 Parameter detail In this sectin yu will be able t set the AC addressing fr each AC unit present in the installatin. Mdbus GW address f ACxx refers t the addres f the Haier Cmmunicatin Addapters. IDU index (in Mdbus GW) f ACxx refers t the AC system address f the Indr Unit. Intesis Sftware S.L.U. - All rights reserved This infrmatin is subject t change withut ntice IntesisBx is a registred trademark f Intesis Sftware SLU inf@intesisbx.cm 22 / 31

23 IntesisBx KNX - Haier A.C. (VRF line) 4.7 License Figure 4.24 Parameter detail Use this sectin t intrduce the migratin cde in case yu need t update yur bx frm anther versin different frm the factry default ne. Intesis Sftware S.L.U. - All rights reserved This infrmatin is subject t change withut ntice IntesisBx is a registred trademark f Intesis Sftware SLU inf@intesisbx.cm 23 / 31

24 IntesisBx KNX - Haier A.C. (VRF line) 5 Technical Specificatins Enclsure ABS (UL 94 HB) de 2,5 mm / 1 thick Net dimensins (dxwxh): 70 x 70 x 28 mm / 2.8 x 2.8 x 1.1 Clr: Ivry White Operatin Temperature 0ºC t +60ºC Weight 42 g. Stck Temperature -20ºC t +85ºC Pwer supply Pwer is supplied by: 1 x KNX bus (29V DC, 7mA) Operatinal Humidity <90% RH, nn-cndensing Terminal Wiring (fr lw-vltage signals) Fr terminal: slid wires r stranded wires (twisted r with ferrule) 1 cre: 0.5mm 2 2.5mm 2 2 cres: 0.5mm 2 1.5mm 2 3 cres: nt permitted Stck Humidity <90% RH, nn-cndensing KNX prt 1 x KNX TP1 (EIB) prt pt-islated. Plug-in terminal blck (2 ples). TNV-1 Islatin vltage 1500 VDC AC unit prt 1 x Specific cnnectr Plug-in terminal blck (3 ples) Islatin resistance 1000 MΩ Cnfiguratin Cnfiguratin with ETS Prtectin IP20 (IEC60529) LED indicatrs 1 x Onbard LED - Operatinal status 70 mm 70 mm KNX bus cnnectin Prgramming LED Prgramming buttn AC Indr unit Haier bus cnnectin 28 mm Intesis Sftware S.L.U. - All rights reserved This infrmatin is subject t change withut ntice IntesisBx is a registred trademark f Intesis Sftware SLU inf@intesisbx.cm 24 / 31

25 IntesisBx KNX - Haier A.C. (VRF line) 6 AC Unit Types cmpatibility. A list f Haier indr unit mdel references cmpatible with HA-AC-KNX-8/16/64 and their available features can be fund in: Intesis Sftware S.L.U. - All rights reserved This infrmatin is subject t change withut ntice IntesisBx is a registred trademark f Intesis Sftware SLU inf@intesisbx.cm 25 / 31

26 IntesisBx KNX - Haier A.C. (VRF line) 7 Errr Cdes Errr Cde in KNX Object Errr in Remte Cntrller Categry Errr Name 1 1 Indr ambient temp.sensr TA (Tas) failure 2 2 Indr gas pipe temp. sensr TC1 failure 3 3 Indr liquid pipe temp. sensr TC2 failure 4 4 Dual heat surce sensr TW failure 5 5 Indr EEPROM failure 6 6 Cmmunicatin between indr and utdr failure 7 7 Cmmunicatin between indr and wired cntrller failure 8 8 Indr flat switch failure Indr Unit 9 9 Indr address repeated failure Reserved Reserved N 50 Hz zer passage signal Cil sensr TC3 failure DC mtr failure Indr ambient temp.sensr TA (Taf) failure Defrsting temp. sensr Tdef1 failure Defrsting temp. sensr Tdef2 failure Ambient temp. sensr Ta failure Suctin temp. sensr Ts1 failure Suctin temp. sensr Ts2 failure Suctin temp. sensr Tsacc failure Suctin temp. sensr Tsuc failure Discharging temp. sensr Tdi failure Discharging temp. sensr Td1 failure Discharging temp. sensr Td2 failure Oil temp. sensr Tilp failure Oil temp. sensr Til failure Inlet temp. f heat exchanger Tci1 failure Inlet temp. f heat exchanger Tci2 failure indr cmmunicatin failure Reduce the number f indr units failure Increase the number f indr units failure Oil temp. t high prtectin (Til) Oil temp. t high prtectin (Ti2) High pressure sensr Pd1 failure High pressure sensr Pd2 failure Lw pressure sensr Ps failure High pressure switch HPSi failure High pressure switch HPS1 failure Outdr Unit High pressure switch HPS2 failure Liquid pipe pressure Pl failure Outlet temp. f subcler Tsc failure Liquid pipe SC temp. f subcler Tliqsc failure EEPROM (AT24C04) failure Discharging temp. t high prtectin (Tdi) Discharging temp. t high prtectin (Td1) Discharging temp. t high prtectin (Td2) way valve reversing failure 4-way valve reversing failure Oil temp. t lw prtectin (Til) Oil temp. t lw prtectin (Ti2) Lack f phase f 3N pwer supply r wrng phase sequence High pressure sensr Pd t lw prtectin Lw pressure sensr Ps t lw prtectin Cmpressin rati t high prtectin Cmpressin 1 rati t lw prtectin Cmpressin 2 rati t lw prtectin High pressure sensr Pd1 t high prtectin High pressure sensr Pd2 t high prtectin Water temp. Twi t lw prtectin Water temp. Twi t high prtectin Frst prtectin f water system Water system ut f water freeze prtectin Water flw f Water system is t small t prtect Discharging temp. sensr Tdi t lw prtectin Discharging temp. sensr Td1 t lw prtectin Discharging temp. sensr Td2 t lw prtectin Intesis Sftware S.L.U. - All rights reserved This infrmatin is subject t change withut ntice IntesisBx is a registred trademark f Intesis Sftware SLU inf@intesisbx.cm 26 / 31

27 IntesisBx KNX - Haier A.C. (VRF line) Lw pressure sensr PS t high prtectin Cmmunicatin amng utdrs failure Cmmunicatin with inverter bard 1 failure Cmmunicatin with inverter bard 2failure Unlading valve SV1 failure Current detectr CT1 failure Cmmunicatin with Thermal strage mdule failure Thermal strage mdule LEV failure Thermal strage mdule t ht failure Cmmunicatin between Thermal strage mdule and hst cmputer Thermal strage mdule Tc1 temp. sensr failure Thermal strage mdule Tc2 temp. sensr failure Reserved Reserved Reserved Thermal strage mdule DIP setting failure CT1 ver current CT2 ver current Cmmunicatin with mtr driving bard failure Left DC mtr blcked Right DC mtr blcked Left DC mtr reversed Right DC mtr reversed Left DC mtr current t high Right DC mtr current t high N pressure drp between high pressure and lw ne Pressure t lw between high pressure and lw ne Incrrect utdr address r capacity setting Oil equalizatin prtectin amng utdrs Lack f refrigerant in cling Lack f refrigerant in heating Incrrect wiring Indr and utdr d nt match Mdel temp. t high prtectin Cmpressr current prtectin Wrng mdel selectin Prgram self-test failure DC mtr driving bard IPM alarm DC mtr driving bard detecting ut f cntrl DC mtr driving bard EEPROM faulty DC mtr driving bard ver current r current detectr damaged Vltage t lw prtectin f DC mtr driving bard Vltage t high prtectin f DC mtr driving bard DC mtr driving bard blcked Prtectin f mtr rate ver Limitatin mdel 1 Over current mdel 2 Over current Intesis Sftware S.L.U. - All rights reserved This infrmatin is subject t change withut ntice IntesisBx is a registred trademark f Intesis Sftware SLU inf@intesisbx.cm 27 / 31

28 IntesisBx KNX - Haier A.C. (VRF line) Cmpressr 1 ut f cntrl Cmpressr 2 ut f cntrl Radiatr f mdel 1 temp. t high Radiatr f mdel 2 temp. t high mdel 1 verlad mdel 2 verlad Vltage t lw f mdel 1 Vltage t lw f mdel Vltage t high f mdel 1 Vltage t high f mdel Cmmunicatin abnrmal with mdel 1 Cmmunicatin abnrmal with mdel Mdel 1 Over current (sftware) Mdel 1 Over current (sftware) Mdel 1 startup failure Mdel 2 startup failure Current Detecting Circuit Abnrmal f transducer 1 Current Detecting Circuit Abnrmal f transducer Pwer supply f transducer 1 abnrmal Pwer supply f transducer 2 abnrmal Pwer supply f inverter bard 1 is abnrmal Pwer supply f inverter bard 2 is abnrmal Radiatr temp. sensr f transducer 1 abnrmal Radiatr temp. sensr f transducer 2 abnrmal Cmpressr 1 frequency nt match Cmpressr 2 frequency nt match MCU reset abnrmal MCU Prgram needs t be upgraded 0 N/A KNX interface N errr (-1) N/A KNX interface Indr Units nt ready fr cmmunicatin (-100) N/A KNX interface License Errr / indr unit nt supprted by current license (-200) N/A KNX interface Overcnsumptin errr in EXY bus In case yu detect an errr cde nt listed, cntact yur nearest Haier technical supprt service fr mre infrmatin n the errr meaning. Intesis Sftware S.L.U. - All rights reserved This infrmatin is subject t change withut ntice IntesisBx is a registred trademark f Intesis Sftware SLU inf@intesisbx.cm 28 / 31

29 IntesisBx KNX - Haier A.C. (VRF line) Appendix A Cmmunicatin Objects Table SECTION OBJECT NUMBER NAME LENGTH DATAPOINT TYPE FLAGS DPT_NAME DPT_ID R W T U FUNCTION On/Off 1 Cntrl_ On/Off 1 bit DPT_Switch W T 0 - Off; 1-On 2 Cntrl_ Operating Mde 1 byte DPT_HVACMde W T 0 - Aut; 1 - Cm; 2 - Stan; 3 - Ec; 4 Pr 3 Cntrl_ Mde 1 byte DPT_HVACCntrl W T 0 - Aut; 1 - Heat; 3 - Cl; 9 - Fan; 14 - Dry 4 Cntrl_ Mde Cl/Heat 1 bit DPT_Cl/Heat W T 0 - Cl; 1 Heat 5 Cntrl_ Mde Aut 1 byte DPT_Scaling W T 1 - Aut Mde 6 Cntrl_ Mde Heat 1 byte DPT_Scaling W T 1 - Heat 7 Cntrl_ Mde Cl 1 bit DPT_Bl W T 1 - Cl 8 Cntrl_ Mde Fan 1 bit DPT_Bl W T 1 Dry 9 Cntrl_ Mde Dry 1 bit DPT_Bl W T 1 Fan Cntrl_ Mde +/- 1 bit DPT_Step W 0 - Decrease; 1 - Increase Cntrl_ Mde +/- 1 bit DPT_UpDwn W 0 - Up; 1 - Dwn Cntrl_ Fan Speed / 3 Speeds 1 byte DPT_Scaling W T 0%-49% - Speed 1; 50%-83% - Speed 2; 84%-100% Speed 3 Cntrl_ Fan Speed / 3 Speeds 1 byte DPT_Enumerated W T 1 - Speed 1; 2 - Speed 2; 3 Speed 3 12 Cntrl_ Fan Speed Man/Aut 1 bit DPT_Bl W T 0 Manual; 1 Aut Fan Speed 13 Cntrl_ Fan Speed 1 1 bit DPT_Bl W T 1 - Fan Speed 1 14 Cntrl_ Fan Speed 2 1 bit DPT_Bl W T 1 - Fan Speed 2 15 Cntrl_ Fan Speed 3 1 bit DPT_Bl W T 1 - Fan Speed 3 16 Cntrl_ Fan Speed +/- 1 bit DPT_Step W T 0 - Decrease; 1 - Increase Cntrl_ Fan Speed +/- 1 bit DPT_UpDwn W T 0 - Up; 1 - Dwn Intesis Sftware S.L.U. - All rights reserved This infrmatin is subject t change withut ntice IntesisBx is a registered trademark f Intesis Sftware SLU inf@intesisbx.cm 29 / 31

30 IntesisBx KNX - Haier A.C. (VRF line) 17 Cntrl_ Setpint Temperature 2 byte DPT_Value_Temp W T 17ºC t 30ºC Temperature 18 Cntrl_ Setpint Temp +/- 1 bit DPT_Step W 0 - Decrease; 1 - Increase Cntrl_ Setpint Temp +/- 1 bit DPT_UpDwn W 0 - Up; 1 - Dwn 19 Cntrl_ Ambient Temperature 2 byte DPT_Value_Temp W T ºC value in EIS5 frmat 20 Cntrl_ Cntrl Mde N Central 1 bit DPT_Bl W T 1 N Central Cntrller Cntrl Mde 21 Cntrl_ Cntrl Mde LIFO 1 bit DPT_Bl W T 1 Last Input First Output (LIFO) 22 Cntrl_ Cntrl Mde Central 1 bit DPT_Bl W T 1 Central Cntrller 23 Cntrl_ Cntrl Mde Lck 1 bit DPT_Bl W T 1 Lck Central Cntrller On/Off 24 Status_ On/Off 1 bit DPT_Switch R T 0 - Off; 1-On 25 Status_ Operating Mde 1 byte DPT_HVACMde R T 0 - Aut; 1 - Cm; 2 - Stan; 3 - Ec; 4 Pr 26 Status_ Mde 1 byte DPT_HVACCntrMde R T 0 - Aut; 1 - Heat; 3 - Cl; 9 - Fan; 14 - Dry 27 Status_ Mde Cl/Heat 1 bit DPT_Heat/Cl R T 0 - Cl; 1 - Heat 28 Status_ Mde Aut 1 bit DPT_Bl R T 1 - Aut Mde 29 Status_ Mde Heat 1 bit DPT_Bl R T 1 - Heat 30 Status_ Mde Cl 1 bit DPT_Bl R T 1 - Cl 31 Status_ Mde Fan 1 bit DPT_Bl R T 1 - Fan 32 Status_ Mde Dry 1 bit DPT_Bl R T 1 - Dry 33 Status_ Mde Text 14 byte DPT_String_8859_ R T ASCII String Fan Speed 34 Status_ Fan Speed / 3 Speeds 1 byte DPT_Scaling R T 33% - Speed 1; 67% - Speed 2; 100% - Speed 3 Status_ Fan Speed / 3 Speeds 1 byte DPT_Enumerated R T 1 - Speed 1; 2 - Speed 2; 3 - Speed 3 35 Status_ Fan Speed Man/Aut 1 bit DPT_Bl R T 0 Manual; 1 Aut Intesis Sftware S.L.U. - All rights reserved This infrmatin is subject t change withut ntice IntesisBx is a registered trademark f Intesis Sftware SLU inf@intesisbx.cm 30 / 31

31 IntesisBx KNX - Haier A.C. (VRF line) 36 Status_ Fan Speed 1 1 bit DPT_Bl R T 1 - Speed 1 37 Status_ Fan Speed 2 1 bit DPT_Bl R T 1 - Speed 2 38 Status_ Fan Speed 3 1 bit DPT_Bl R T 1 - Speed 3 39 Status_ Fan Speed Text 14 byte DPT_String_8859_ R T ASCII String Temperature 40 Status_ AC Setpint Temp 2 byte DPT_Value_Temp R T 16ºC t 32ºC 41 Status_ AC Ambient Ref Temp 2 byte DPT_Value_Temp R T ºC value in EIS5 frmat 42 Status_ Errr/Alarm 1 bit DTP_Alarm R T 0 - N Alarm; 1 - Alarm Errr 43 Status_ Errr Cde 2 byte Enumerated R T 0 - N Errr; Any ther see user's manual 44 Status_ Errr Text cde 14 byte DPT_String_8859_ R T 2 char Haier Errr; Empty - nne 45 Cntrl_ Cntrl Mde N Central 1 bit DPT_Bl W T 1 N Central Cntrller Cntrl Mde 46 Cntrl_ Cntrl Mde LIFO 1 bit DPT_Bl W T 1 Last Input First Output (LIFO) 47 Cntrl_ Cntrl Mde Central 1 bit DPT_Bl W T 1 Central Cntrller 48 Cntrl_ Cntrl Mde Lck 1 bit DPT_Bl W T 1 Lck Central Cntrller NOTE: This addressing crrespnds t the first AC indr unit f the cnfiguratin. Cmmunicatin bjects fr the rest f AC units are cnsecutively listed. Intesis Sftware S.L.U. - All rights reserved This infrmatin is subject t change withut ntice IntesisBx is a registered trademark f Intesis Sftware SLU inf@intesisbx.cm 31 / 31

IntesisBox HS-RC-KNX-1i v1.1

IntesisBox HS-RC-KNX-1i v1.1 IntesisBx HS-RC-KNX-1i v1.1 KNX (TP-1) Interface fr HISENSE VRF Air Cnditining. User's Manual Issue Date: 01/2018 r1.0 EN Order Cde: IBKNXHIS001R000 IntesisBx KNX Hisense Intesis Sftware S.L.U. All Rights