MCS Machine Construction System. 30 x 30 see page 5. 40LR see page x 90L. see page x 80L see page 12
|
|
- Lewis Freeman
- 5 years ago
- Views:
Transcription
1 A M M P F M Machine onstruction ystem x see page 4 x see page 4 30 x 30 see page 5 30 x 60 see page 5 x see page 6 x see page 6 x 80 see page 7 see page 7 x see page 8 x see page 8 x 60 see page 9 x 60 see page 9 x see page 10 x see page 10 see page x 60 see page x 60 see page x 80 see page 12 x see page 13 x see page 13 hese structural aluminium profiles are precision extruded using high quality A material. hey are then clear-coat anodised to a thickness of 10 microns resulting in an accurate hard-wearing basis for all types of frame construction. All profiles include -slots along their length allowing simple insertion of -nuts and -bolts to attach connection brackets or accessories. Most sizes of structural profile are available as standard in 6000mm lengths with the exception of the largest and smallest sizes (00mm). A fast cutting drilling machining and tapping service is provided by Hepco which also includes complete frame assembly to customer's drawings. ee page 59 for end finishing details. For details of 'hoosing the correct M ystem profile for your application' please refer to pages 54 to 55. omplete echnical details may be found on pages 50 to 59. 3
2 M Machine onstruction ystem A M M P F X Q K F M5 12 ø H A D A A Max. ength 00mm 0.44kg/m Moment of nertia (cm 4 ) xx 0.7 yy 0.7 ection Modulus (cm 3 ) Wxx 0.7 Wyy 0.7 X Q K F M5 ø AVAAB PH F DA 6 7 H A D A A Max. ength 00mm 0.77kg/m Moment of nertia (cm 4 ) xx 4.5 yy 1.2 ection Modulus (cm 3 ) Wxx Wyy 1.2
3 A M M P F M Machine onstruction ystem 30 X Q K F M ø H A D A A Max. ength 6000mm 0.94kg/m Moment of nertia (cm 4 ) xx 3.4 yy 3.4 ection Modulus (cm 3 ) Wxx 2.2 Wyy X Q K F M5 30 ø AVAAB PH F DA H A D A A Max. ength 6000mm 1.74kg/m Moment of nertia (cm 4 ) xx 23.3 yy 6.1 ection Modulus (cm 3 ) Wxx 7.8 Wyy 4.1 5
4 M Machine onstruction ystem A M M P F X Q K F H A D A A Max. ength 6000mm 1.4kg/m Moment of nertia (cm 4 ) xx 8.2 yy 8.2 ection Modulus (cm 3 ) Wxx 4.1 Wyy 4.1 X Q K F H A D A A Max. ength 6000mm 1.9kg/m Moment of nertia (cm 4 ) xx 11.1 yy 11.1 ection Modulus (cm 3 ) Wxx Wyy 5.6
5 A M M P F M Machine onstruction ystem X Q K F 80 H A D A A Max. ength 6000mm 2.62kg/m Moment of nertia (cm 4 ) xx 61.2 yy 17.0 ection Modulus (cm 3 ) Wxx15.3 Wyy Q K F AVAAB PH F DA H A D A A Max. ength 6000mm 1.16kg/m Moment of nertia (cm 4 ) xx 6.0 yy 6.0 ection Modulus (cm 3 ) Wxx 2.4 Wyy 2.4 7
6 M Machine onstruction ystem A M M P F X Q K F H A D A A Max. ength 6000mm 1.5kg/m Moment of nertia (cm 4 ) xx 10.4 yy 10.4 ection Modulus (cm 3 ) Wxx 4.6 Wyy 4.6 X Q K F H A D A A Max. ength 6000mm 1.9kg/m Moment of nertia (cm 4 ) xx 13.8 yy 13.8 ection Modulus (cm 3 ) Wxx Wyy 6.1
7 A M M P F M Machine onstruction ystem X Q K F AVAAB PH F DA 60 H A D A A Max. ength 6000mm 2.06kg/m Moment of nertia (cm 4 ) xx 24.0 yy 15.1 ection Modulus (cm 3 ) Wxx 8.0 Wyy 6.7 X Q K F 60 H A D A A Max. ength 6000mm 2.8kg/m Moment of nertia (cm 4 ) xx 34.2 yy 21.6 ection Modulus (cm 3 ) Wxx11.4 Wyy 9.6 9
8 M Machine onstruction ystem A M M P F X Q K F AVAAB PH F DA H A D A A Max. ength 6000mm 3.08kg/m Moment of nertia (cm 4 ) xx 92.6 yy 22.1 ection Modulus (cm 3 ) Wxx.6 Wyy 9.8 X Q K F H A D A A Max. ength 6000mm 3.8kg/m Moment of nertia (cm 4 ) xx yy 32.0 ection Modulus (cm 3 ) Wxx Wyy 14.2
9 A M M P F M Machine onstruction ystem Q K F 22 AVAAB PH F DA 22.5 H A D A A Max. ength 6000mm 1.29kg/m Moment of nertia (cm 4 ) xx 7.6 yy 7.6 ection Modulus (cm 3 ) Wxx 3.4 Wyy X Q K F H A D A A Max. ength 6000mm 2.88kg/m Moment of nertia (cm 4 ) xx 37.0 yy 37.0 ection Modulus (cm 3 ) Wxx 12.3 Wyy
10 M Machine onstruction ystem A M M P F 60 X Q K F X H A D A A Max. ength 6000mm 3.6kg/m Moment of nertia (cm 4 ) xx 52.7 yy 52.7 ection Modulus (cm 3 ) Wxx 17.6 Wyy 17.6 Q K F H A D A A Max. ength 6000mm 4.05kg/m Moment of nertia (cm 4 ) xx yy ection Modulus (cm 3 ) Wxx 27.6 Wyy 27.6
11 A M M P F M Machine onstruction ystem X Q K F H A D A A Max. ength 00mm 6.7kg/m Moment of nertia (cm 4 ) xx yy ection Modulus (cm 3 ) Wxx 47.0 Wyy 47.0 X Q K F M16 ø14 H A D A A Max. ength 00mm 9.9kg/m Moment of nertia (cm 4 ) xx yy ection Modulus (cm 3 ) Wxx 67.9 Wyy
KSV. Slot diffusers. Ordering code. Description. Linear diffusers 1 / 16
Linear diffusers 1 / 1 KSV Slot diffusers Ordering code Number of slots Diffuser Length (mm) KSV - 1... - 19 Description KSV is an air terminal element primarily designated for air supply. It is suitable
More informationProduct Description. Further highlights. Outstanding features. 4 Bosch Rexroth Corporation Miniature Linear Modules R310A 2418 (2009.
4 Bosch Rexroth orporation Miniature Linear Modules R310A 2418 (2009.05) Product Description Outstanding features Rexroth Miniature Linear Modules are precise, ready-to-install linear motion systems that
More informationBulletin September
Bulletin September 2011 240 ***Change to Silver Anodised Lead Time*** We would like to advise customers of a change to the lead time on non-stocked silver anodised material with immediate effect: Finish
More informationLinear Guides SH Series
inear Guides S Series Ball Slide Models: A, B Front view of A and B types Side view of B type MRO B1 W B 4-M l 1 T MYO K E B 3 W2 W1 Model o. SA SB SA SB S2A S2B SA SB S3A S3B S4A S4B SA SB Assembly Ball
More informationLinear diffuser. Description
A C B + D Description is a rectangular linear diffuser in aluminium. is suitable for both supply and exhaust air. is equipped with air guide baffles, making it possible to use for horizontal supply air.
More informationCTV series CHARACTERISTICS LINEAR UNITS
CTV series CHARACTERISTICS The CTV series describes s with a precision ball screw drive and two parallel, integrated, Zerobacklash rail guides. Compact dimensions allow high performance features such as,
More informationNR ROTARY RING TABLE: FLEXIBLE IN EVERY RESPECT
NR FREELY PROGRAMMABLE ROTARY TABLES NR ROTARY RING TABLE All NR rings allow customer-specific drive motors to be connected NR ROTARY RING TABLE: FLEXIBLE IN EVERY RESPECT WHEN IT S GOT TO BE EXACT We
More informationStructural Calculations for Juliet balconies using BALCONY 2 System (Aerofoil) handrail. Our ref: JULB2NB Date of issue: March 2017
Juliet balconies using BALCONY 2 System (Aerofoil) handrail PAGE 1 (ref: JULB2NB280317) Structural Calculations for Juliet balconies using BALCONY 2 System (Aerofoil) handrail Our ref: JULB2NB280317 Date
More informationBOLT SIZE Rec.Torque Ft/Lbs. Max Torque Ft/Lbs
BOLT SIZE Rec.Torque Ft/Lbs Max Torque Ft/Lbs "-0 5 "- "- "- 5 "- "-0 () 7 (9) (5) 5 (0) 9 () 5 () 50 () 70 (95) 00 () 5 (70) 5 (70) 5 () Material Add Suffix to P/N P09 THRU P PIPE CLAMPS FOR RIGID STEEL
More informationME 201 Engineering Mechanics: Statics
ME 0 Engineering Mechanics: Statics Unit 9. Moments of nertia Definition of Moments of nertia for Areas Parallel-Axis Theorem for an Area Radius of Gyration of an Area Moments of nertia for Composite Areas
More informationSlot diffuser. Type VSD35 2/2.6/B/3. with 35 mm wide slot
2/2.6/B/3 Slot diffuser Type VSD35 with 35 mm wide slot TROX UK Ltd Telephone +44 (0) 1842 754545 Caxton Way Telefax +44 (0) 1842 763051 Thetford e-mail trox@troxuk.co.uk Norfolk IP24 3SQ www.troxuk.co.uk
More informationBalcony balustrades using the SG12 laminated glass system: PAGE 1 (SG12FF010717) Structural Calculations for SG12 System balustrades using 21.5mm laminated toughened glass without the need for a handrail
More informationBASE DIMENSIONS INSTALLATION NOTE SERVING WE S T E R N CAN A DA F O R O V E R 10 0 Y EARS
SEVING WE S E N N D F O O V E 0 Y ES F l a n g ed oint Dimension s NSI/W W 1 / 1.1 0 OD OD ole Dia. olt No. olts -1/ 5 1.00 0 0 0.00 0 1..00. 0 0.00..00 0 5. 0.00 0. 10.. 0.00. 0 0. 0.9 0.9 0.9 1. 1. 1.
More informationTHREE HOLE SPLICE CLEVIS FOR B52 Standard finishes: ZN, GRN Wt./C 126 Lbs. (57.1 kg)
CLEVIS FITTINGS B169 TWO HOLE SPLICE Wt./C 84 Lbs. (38.1 kg) B168 THREE HOLE SPLICE Wt./C 126 Lbs. (57.1 kg) B167 Wt./C 178 Lbs. (80.7 kg) 3 1 /2 (88.9) B170 TWO HOLE SPLICE Wt./C 123 Lbs. (55.8 kg) 5
More informationHALFEN FRAMING CHANNELS AND ACCESSORIES FRAMING
HAEN RAMING CHANNES AND ACCESSORIES RAMING HAEN RAMING SYSTEMS Product range - Overview pages - pages - pages - Heav dut framing sstems data Z Q Medium dut framing sstems pages - 0 pages - 0 pages - 0
More informationTap Changer Type MHF III Specification, Assembly and Materials
Tap Changer Type MHF III Specification, ssembly and Materials Descriptions General Specifications Remarks available in one, two or three phase applications shaft length available in variable sizes connection
More informationPoints. Precision Positioning Table TU. Variation. Major product specifications With flange
9 0 Precision Positioning Table Ball screw inear Points lide table with high accuracy and high rigidity in a single structure lide table Compact and slim type positioning table with an original U-shaped
More informationThe FLUX F 430 with mechanical seal
The FLUX F 0 with mechanical seal Flexible coupling between motor and pump The pump must be used with many varying liquids, consequently the smallest residual left within the pump is unacceptable. You
More informationUNIVERSITY OF BOLTON WESTERN INTERNATIONAL COLLEGE FZE BENG (HONS) CIVIL ENGINEERING SEMESTER ONE EXAMINATION 2015/2016
OCD62 UNIVERSITY OF BOLTON WESTERN INTERNATIONAL COLLEGE FZE BENG (HONS) CIVIL ENGINEERING SEMESTER ONE EXAMINATION 2015/2016 ENGINEERING MATHEMATICS AND STRUCTURES MODULE NO. CIE5004 Date: Thursday 14
More informationA. Incorrect! This inequality is a disjunction and has a solution set shaded outside the boundary points.
Problem Solving Drill 11: Absolute Value Inequalities Question No. 1 of 10 Question 1. Which inequality has the solution set shown in the graph? Question #01 (A) x + 6 > 1 (B) x + 6 < 1 (C) x + 6 1 (D)
More informationSTRUCTURAL CALCULATIONS
STRUCTURAL CALCULATIONS FOR SG10 SYSTEM BALUSTRADES USING 21.5mm LAMINATED TOUGHENED GLASS without the need for a handrail BY BALCONY SYSTEMS LIMITED Unit 6 Systems House Eastbourne Road Blindly Heath
More informationINTRODUCING HORIZONTAL
i n t r o d u c t i o n. INTRODUCING HORIZONTAL A W I D E R A N G E O F PA N E L S, S YS T E M C O M P O N E N T S A N D A C C E S S O R I E S TO C O M B I N E F O R A W E L L D E S I G N E D S E L L I
More informationVX25 Enclosure System. Technical documentation PE conductor connection, current carrying capacity
VX Enclosure System Technical documentation PE conductor connection, current carrying capacity Enclosure system VX Contents Contents. General remarks. Introduction. Notes on the design of the earthing
More informationPrecision Ball Screw/Spline
58-2E Models BNS-A, BNS, NS-A and NS Seal Outer ring Shim plate Seal Spline nut Seal Collar Shim plate Seal End cap Ball Outer ring Ball screw nut Outer ring Ball Retainer Retainer Outer ring Point of
More informationINSTRUCTIONS FOR ATTACHING THE NORDIC PLOW TO THE ACTION TRACKCHAIR
1 INSTRUCTIONS FOR ATTACHING THE NORDIC PLOW TO THE ACTION TRACKCHAIR Nordic Auto Plow LLC is pleased to provide a plow blade that can be used with your Action Trackchair year round. We are not affiliated
More informationInstruction Manual. Kite-22 Camera Crane Starter Package (KITE-22-STARTER) Exclusive of Weights
Instruction Manual Kite-22 Camera Crane Starter Package (KITE-22-STARTER) Exclusive of Weights All rights reserved No part of this document may be reproduced, stored in a retrieval system, or transmitted
More informationCNA-CNB. Centrifugal fans
NA-NB entrifugal fans Product facts Product Single-inlet low-pressure fans with backward-curved blades. Use In industrial ventilation systems for uncontaminated, non-corrosive air, max. 70 º, where a low
More informationBasic mechanic elements 13.2
Basic mechanic elements. 0- MGE. Explanations Quick & Easy Explanations Presentation 0x0 HR L (mm) No. pcs 0 000 / L pcs M M 000 / L pcs 00 0/0 Slot No. Bracket (standard) 0 Explanation Product available
More informationThe OCTANORM system components set a new standard in shop design.
O C TA N O R M S H O P S Y S T E M S. A B R I E F I N T R O D U C T I O N. The OCTANORM system components set a new standard in shop design. The wide range of aluminum profiles, the well designed accessories
More informationY o u c e r t a i n l y p r e f e r a h i g h q u a l i t y w e l c o m e f o r y o u r c u s t o m e r s. T h e f i r s t g l a n c e u p o n a r r
L o b b y Y o u c e r t a i n l y p r e f e r a h i g h q u a l i t y w e l c o m e f o r y o u r c u s t o m e r s. T h e f i r s t g l a n c e u p o n a r r i v a l w i l l b e a p l e d g e o f c o
More informationHARTING D-Sub Selection Guide
HARTING D-Sub Selection Guide People Power Partnership D-Sub Selection Guide D-Sub Device Connectivity HARTING Connectivity & Networks generates solutions throughout the triad of Installation Technology,
More informationFOR CAN-AM ATV s P/N ASSEMBLY / OWNERS MANUAL
MID-MOUNT KIT FOR CAN-AM ATV s P/N 15-7580 ASSEMBLY / OWNERS MANUAL Application PLOW PUSH FRAME NO. 15-0070, 33-0000 or 33-0070 Before you begin, please read these instructions and check to be sure all
More informationTwo Posts to Fill On School Board
Y Y 9 86 4 4 qz 86 x : ( ) z 7 854 Y x 4 z z x x 4 87 88 Y 5 x q x 8 Y 8 x x : 6 ; : 5 x ; 4 ( z ; ( ) ) x ; z 94 ; x 3 3 3 5 94 ; ; ; ; 3 x : 5 89 q ; ; x ; x ; ; x : ; ; ; ; ; ; 87 47% : () : / : 83
More informationPLOW MOUNT KIT FOR YAMAHA VIKING P/N ASSEMBLY / OWNERS MANUAL. Application PLOW PUSH FRAME NO or
PLOW MOUNT KIT FOR YAMAHA VIKING P/N 34-5020 ASSEMBLY / OWNERS MANUAL Application PLOW PUSH FRAME NO. 34-0000 or 34-0070 Before you begin, please read these instructions and check to be sure all parts
More informationWARNING. INJURY HAZARD Failure to observe these instructions could lead to severe injury or death.
INSTALLATION INSTRUCTIONS ATV Front Plow Mount Kit Part Number: 80031 Applications: 2007+ Honda Rancher 420 2007+ Honda Rancher ES 420 2009+ Honda Rancher AT 420 *Not compatible with 2.5ci or A2000 winches
More informationATV WP2 FRONT MOUNT PUSH TUBE
ATV WP2 FRONT MOUNT PUSH TUBE ASSEMBLY / OWNER S MANUAL Part No: 16-0000 MAN0352 Rev. 00 OPERATING INSTRUCTIONS Congratulations! You ve just purchased the most durable plow component in the industry. Cycle
More informationRodless cylinders Series 1600
Rodless cylinders Series 00 Basic version 0.Ø.stroke.0.M Max. stroke mt.) AL AI RA RB AF TC AM L LA+stroke AH TD AE TA RV Possibility of a single feed cylinder head AI AP AB AC AD TD TE TB AG RT Left head
More informationHELLA. Linear slot diffuser. Ordering codes. HELLA - Linear diffuser. Linear Diffusers 1 / 18. Example of the ordering code HELLA B-0-0-AN
Linear Diffusers / 8 HELLA Linear slot diffuser Ordering codes HELLA - Linear diffuser HELLA - Number of slots... Diffuser length L (mm) ) Increment mm... Deflector colour Damper Diffuser construction
More informationINSTALLATION INSTRUCTIONS PLOW MOUNT KIT Part Number: Application: Honda Foreman 500
WARN INDUSTRIES, INC. 12900 S.E. Capps Road, Clackamas, OR USA 97015-8903, 1-503-722-1200, FAX: 1-503-722-3000 Customer Service: 1-800-543-9276 Dealer Locator Service: 1-800-910-1122 International Sales/Customer
More informationTangential Fans Series TW Impeller diameter 150 mm and 200 mm
Tangential Fans Series TW Impeller diameter mm and 0 mm 105 Corporate Drive, Suite E Spartanburg, SC 293 PO Box 2889, Spartanburg, SC 294 USA Tel: 864-599-63 Fax: 864-599-6344 e-mail: info@ltg-inc.net
More informationINSTALLATION INSTRUCTIONS FRONT PLOW MOUNT KIT Part Number: Application: Polaris Sportsman 400, 500, 800
WARN INDUSTRIES, INC. 12900 S.E. Capps Road, Clackamas, OR USA 97015-8903, 1-503-722-1200, FAX: 1-503-722-3000 Customer Service: 1-800-543-9276 Dealer Locator Service: 1-800-910-1122 International Sales/Customer
More informationDELTA FLOWMETER FOR GAS SERVICE (INSERTION TYPE) MODEL VF SERIES
DETA FOWMETER FOR GAS SERVICE (INSERTION TYPE) MODE VF SERIES GENERA SPECIFICATION GS. No. GBD0-0-E GENERA In the thermistor type Delta meter, a probe inserted in the pipeline detects the representative
More informationProduct description. Compact Modules. Characteristic features. Further highlights
4 Compact Modules Product description Characteristic features Five fine-tuned sizes based on a compact precision aluminum profile with two integrated pre-tensioned ball rail systems Identical external
More informationRGS08 Linear Rails: RGS08 Non-Motorized With and Without Guide Screw. RGS08 Non-Motorized Linear Rails
RGS08 RGS08 Non-Motorized With and Without Guide RGS08 Non-Motorized Linear Rails RG Series linear rails are available: RGS08 Non-Motorized, -driven linear rail RGS08 Non-Motorized linear rail without
More informationRGS06 Linear Rails: RGS06 Non-Motorized With and Without Guide Screw. RGS06 Non-Motorized Linear Rails
on-motorized With and Without Guide on-motorized Linear Rails RG Series linear rails are available: on-motorized, -driven linear rail on-motorized, Wide format, -driven linear rail on-motorized, Wide format,
More informationPLOW MOUNT KIT FOR POLARIS RANGER P/N ASSEMBLY / OWNERS MANUAL
PLOW MOUNT KIT FOR POLARIS RANGER P/N 34-3010 ASSEMBLY / OWNERS MANUAL Application PLOW PUSH FRAME NO. 34-0000 or 34-0070 Before you begin, please read these instructions and check to be sure all parts
More informationCeiling Diffuser. Type ADLR with circular face. Type ADLR-Q with square face 2/16/EN/8
2/16/EN/8 Ceiling Diffuser Type ADLR with circular face Type ADLR-Q with square face TROX GmbH Telephone +49/28 45/2 02-0 Telefax +49/28 45/2 02-2 65 Heinrich-Trox-Platz e-mail trox@trox.de D-47504 Neukirchen-Vluyn
More informationSection Installation accessories. > UNION Series > TIES Series > FIXO Series > CABLO Series > FASTY Series > RAILDIN Series
Section > UNION Series > TIES Series > FIXO Series > CABLO Series > FASTY Series > RAILDIN Series 22 23 > CABLE GLANDS WITH DEVICE TO PREVENT ANY UNSCREWING UNION Series B (*) IP8 (1 bar) C A in mm A B
More informationPart 1 is to be completed without notes, beam tables or a calculator. DO NOT turn Part 2 over until you have completed and turned in Part 1.
NAME CM 3505 Fall 06 Test 2 Part 1 is to be completed without notes, beam tables or a calculator. Part 2 is to be completed after turning in Part 1. DO NOT turn Part 2 over until you have completed and
More informationDrive Units with Ball Screw Drives R310EN 3304 ( ) The Drive & Control Company
Drive Units with Ball Screw Drives R310EN 3304 (2007.05) The Drive & Control Company Linear Motion and Assembly Technologies Ball Rail Systems Roller Rail Systems Linear Bushings and Shafts Precision Ball
More informationVELOCITY EFFECTS ON THE BEHAVIOUR OF ASYMMETRICAL FRICTION CONNECTIONS (AFC)
8 th International Conference on Behavior of Steel Structures in Seismic Areas Shanghai, China, July 1-3, 2015 VELOCITY EFFECTS ON THE BEHAVIOUR OF ASYMMETRICAL FRICTION CONNECTIONS (AFC) Jose C. Chanchi
More informationLIQUID ACCELEROMETER P3-3525
WWW.ARBORSCI.COM LIQUID ACCELEROMETER P3-3525 BACKGROUND: The Liquid Accelerometer is intended to illustrate accelerations in various dynamic situations. The device is a clear rectangular container partially
More informationSeries MHY2/MHW Angular Gripper. Cam actuation style is now standardized! MHZ2 MHZJ2 MHQ MHL2 MHR MHK MHS MHC2 MHT2 MHY2 MHW2 MRHQ 2.
18 Angular Gripper Cam Style Rack & Pinion Style Series / Cam actuation style is now standardized! 2.8-1 18 Angular Gripper 18 Angular Gripper Series / Cam Style Rack & Pinion Style Series / Series MHY/Cam
More informationD-POWER END MILLS END MILLS
0 YEDP DPOWE END S 7 9 DPOWE END S DIAMOND COATED CABIDE END S FO & COMPOSITE MATEIALS 9 HEAD OFFICE, Sewolcheonro, Bupyeonggu, Incheon, Korea PHONE : +9, FAX :+7 Http://www.yg.kr Email:yg@yg.kr Tool specifications
More informationMODULAR AND CUSTOM EXHIBIT SOLUTIONS
2018 MODULAR AND CUSTOM EXHIBIT SOLUTIONS KLIK MAGNETIC DISPLAYS Crown Molding Finish off any pillow case box shape with our crown molding for a tight, architectural look. Artwork Framed artwork or just
More informationElectron Microscopy Sciences INSTRUCTION MANUAL. Stereo Microscopes Non-illuminated Stands
Electron Microscopy Sciences 1 INSTRUCTION MANUAL Stereo Microscopes Non-illuminated Stands Model GL7-207: Binocular, 6.5:1 Zoom Ratio 10X to 65X, smooth ball bearing construction and Model GL7-307: Trinocular,
More informationGRC. Circular egg crate grille for transfer/extract air and wall/ceiling mounting QUICK FACTS
Circular egg crate grille for transfer/extract air and wall/ceiling mounting QUICK FACTS For exhaust air 91% free area Handles large airflows Cleanable Can be used with commissioning box ALS Standard colour
More informationOrder No.: » Working radius» Clamping height» lamping force. » Working radius» Clamping height» Clamping force
C l a m p i n g T o o l s c l a m p i n g a c c e s s o r i e s U n i v e r s a l v i c e 6 7 P i c c o l o Order No.: 920 05792» Working radius» Clamping height» Clamping force max. 67 mm -10-86 mm max.
More informationQuadratic Equations 6 QUESTIONS. Relatively Easy: Questions 1 to 2 Moderately Difficult: Questions 3 to 4 Difficult: Questions 5 to 6
Quadratic Equations 6 QUESTIONS Relatively Easy: Questions 1 to 2 Moderately Difficult: Questions 3 to 4 Difficult: Questions 5 to 6 Questions www.tutornext.com Page 2 of 11 Q1. The factors of 2x² - 7x
More informationPUSH TUBE STANDARD DUTY
PUSH TUBE STANDARD DUTY ASSEMBLY / OWNER S MANUAL Part No: 15-0070 PUR223 Rev. 00 OPERATING INSTRUCTIONS Congratulations! You ve just purchased the most durable plow component in the industry. Cycle Country
More informationFOREMAN ASSEMBLY / OWNER S MANUAL
ATV PLOW MOUNT For HONDA FOREMAN ASSEMBLY / OWNER S MANUAL Part No: 15-1610 MAN0418 Rev. 00 OPERATING INSTRUCTIONS Congratulations! You ve just purchased the most durable plow component in the industry.
More informationWARNING. INJURY HAZARD Failure to observe these instructions could lead to severe injury or death.
INSTALLATION INSTRUCTIONS Kawasaki Mule Plow Mounting Kit WARN Part Number: 71983 Application: Kawasaki Mule 2002-2006 Your safety, and the safety of others, is very important. To help you make informed
More informationFor Customer Service, Rev A - 6/ OF 6
Item SP-6219 50 Universal Snow Plow Package RED Plow Item SP-6257 64 Universal Snow Plow Package RED Plow For Customer Service, Email CustomerService@yourfingertips-online.com Please read and understand
More information5/2-5/3 SPOOL VALVES MULTIFUNCTION air operated or solenoid air operated with subbase ISO 5599/1 sizes 1, 2 and 3
/ - / SPOOL VALVES MULTIFUNCTION air operated or solenoid air operated with subbase ISO 99/ sizes, and Series Fluids air or inert gas, filtered, lubricated or not Operating pressure Pilot pressure Ambient
More information3B SCIENTIFIC PHYSICS
3B SCIENTIFIC PHYSICS Torsion Apparatus 1018550 Torsion Apparatus Supplement Set 1018787 Instruction manual 11/15 TL/UD 1. Description The torsion equipment is designed for determining the torsion coefficient
More informationRP-200 TELESCOPE Instruction Manual
2070 5th Avenue Ronkonkoma, NY 11779 Phone: 631-963-5000 Fax: 631-427-6749 For information, call toll-free: 1-800-967-8427 info@carson.com / sales@carson.com / www.carson.com RP-200 TELESCOPE Instruction
More informationMulti-cone diffuser. Dimensions
Dimensions Vertical Ød 8 Max. H ØU ØD Horizontal Ød Description is an adjustable circular multi-cone diffuser, which is typically used for supply air. The diffuser can be switched between horizontal and
More informationDISC-O-FLEX COUPLING
RATHI TRANSPOWER PVT. LTD. PUNE - INDIA INSTALLATION INSTRUCTIONS DISC-O-FLEX COUPLING R-II-D-01/00-04/08 Page 1 INSTALLATION INSTRUCTIONS (A) BEFORE INSTALLATION 1. R e m o v e t h e c o u p l i n g f
More informationand F NAME: ME rd Sample Final Exam PROBLEM 1 (25 points) Prob. 1 questions are all or nothing. PROBLEM 1A. (5 points)
ME 270 3 rd Sample inal Exam PROBLEM 1 (25 points) Prob. 1 questions are all or nothing. PROBLEM 1A. (5 points) IND: In your own words, please state Newton s Laws: 1 st Law = 2 nd Law = 3 rd Law = PROBLEM
More informationChapter XX: 1: Functions. XXXXXXXXXXXXXXX <CT>Chapter 1: Data representation</ct> 1.1 Mappings
978--08-8-8 Cambridge IGCSE and O Level Additional Mathematics Practice Book Ecerpt Chapter XX: : Functions XXXXXXXXXXXXXXX Chapter : Data representation This section will show you how to: understand
More informationOWELL WEEKLY JOURNAL
Y \»< - } Y Y Y & #»»» q ] q»»»>) & - - - } ) x ( - { Y» & ( x - (» & )< - Y X - & Q Q» 3 - x Q Y 6 \Y > Y Y X 3 3-9 33 x - - / - -»- --
More informationDESIGN AND DEVELOPMENT OF LABORATORY MODELS OF DYNAMIC VIBRATION ABSORBER
DESIGN AND DEVELOPMENT OF LABORATORY MODELS OF DYNAMIC VIBRATION ABSORBER CHAUHAN S. J. Assistant Professor, Department of Mechanical Engineering, FCRIT, Vashi, santosh.chauhan@fcrit.ac.in JOSHI A. S.
More informationCam Roller Guides. The Drive and Control Company. Service Automation. Electric Drives and Controls. Linear Motion and Assembly Technologies
Industrial Hydraulics Electric Drives and Controls Linear Motion and Assembly Technologies Pneumatics Service Automation Mobile Hydraulics Cam Roller Guides The Drive and Control Company Linear Motion
More informationTechnical introduction
Technical introduction. eneral points n order to provide optimum performance of semi-conducting devices it is essential not to exceed the maximum junction temperature indicated by the manufacturer. enerally
More informationGlobe Valve, Metal. Sectional drawing. *see information on working medium on page 2
Globe Valve, Metal Construction The GEMÜ pneumatically operated /-way valve has a robust low maintenance aluminium actuator. The valve spindle is sealed by a self-adjusting gland packing providing low
More informationCabinets NOVASTAR. Overview Cabinets Wall mounted cases Accessories for cabinets and wall mounted cases 3.
Overview..... 0 NOVASTAR Cabinets NOVASTAR Cabinets...... 1 Wall mounted cases........ 2 Accessories for cabinets and wall mounted cases 3 Climate control 4 Desk-top cases 5 Subracks/ 19" chassis... 6
More informationMain Catalogue. Edition 23, chapter minirack: Phase-out product!
Edition 23, chapter minirack: Phase-out product! Overview... 0 Cabinets... 1 G Cabinets G Wall mounted cases... 2 Accessories for cabinets and wall mounted cases... 3 Climate control... 4 Desk-top cases...
More informationA2 3D Printer Installation Instruction
A2 3D Printer Installation Instruction Introduction Attention: 1.Please make sure the package not broken when you receive it. 2.Please check the printer parts according to the packing list. 3. Please contract
More informationINSTALLATION INSTRUCTIONS ATV Plow Blade Part Number: (50 ), (54 ), or (60 ) Application: All Terrain Vehicles
INSTALLATION INSTRUCTIONS ATV Plow Blade Part Number: 78950 (50 ), 78954 (54 ), or 78960 (60 ) Application: All Terrain Vehicles Your safety, and the safety of others, is very important. To help you make
More informationHT600 Dat e Code: 2 - HT MW Purchase Date: PLEASE RETAIN THIS INSTRUCTION MANUAL FOR FUTURE REFERENCE. All Rights Reserved
We strive to ensure that our products are of the highest quality and free of manufacturing defects or missing parts. However, if you have any problems with your new product, D O NOT RETURN IT TO THE STORE,
More informationSnow Blade Operator s/assembly Instructions
Snow Blade Operator s/assembly Instructions TABLE OF CONTENTS Safety Messages...3 Introduction...4 Preparing for Snow Removal...4 Operating Procedure...5 Operating Controls...5 Tire Chains and Wheel Weights...5
More informationHilti North America Installation Technical Manual Technical Data MI System Version
MIC-S10-AH-L 179517-1 Hilti North America Installation Technical Manual Technical Data MI System Version 1. 08.017 Terms of common cooperation / Legal disclaimer The product technical data published in
More informationCabinets G " integrated in upright Handle strip in side panel Easy solution for shortened doors
Overview... 0 Cabinets... 1 Cabinets Wall mounted cases... 2 Accessories for cabinets and wall mounted cases... 3 Climate control... 4 Desk-top cases... 5 Subracks/ 19" chassis... 6 02002002 Front panels,
More informationV0. PLAY Downlight recessed. Description Recessed for indoor use.
71-3878-14-37 V0 Downlight recessed Description Recessed for indoor use. For downlighting. Up to 40,000 possible combinations. Lenses allow optimum control of illumination with minimal residual halo.,
More informationD e s i g n o f R i v e t e d J o i n t s, C o t t e r & K n u c k l e J o i n t s
D e s i g n o f R i v e t e d J o i n t s, C o t t e r & K n u c k l e J o i n t s 1. Design of various types of riveted joints under different static loading conditions, eccentrically loaded riveted joints.
More informationA through-bolt expansion wedge anchor with controlled torque, for use in non cracked concrete.
A through-bolt expansion wedge anchor with controlled torque, for use in non cracked concrete. ETA assessed option 7 anchor. Stainless steel 316 (A4) grade, with 316 (A4) grade stainless steel expansion
More informationTUTORIAL SHEET 1. magnitude of P and the values of ø and θ. Ans: ø =74 0 and θ= 53 0
TUTORIAL SHEET 1 1. The rectangular platform is hinged at A and B and supported by a cable which passes over a frictionless hook at E. Knowing that the tension in the cable is 1349N, determine the moment
More informationAmphenol. Amphenol-Tuchel Electronics GmbH. Series C 146 Heavy Duty Connectors Core Programme
Amphenol Amphenol-Tuchel Electronics GmbH Series C 146 Heavy Duty Connectors Core Programme The Company General information These connectors are designed and produced in conformity with the voltage directive
More informationEE ELECTRICAL ENGINEERING DRAWING
EE09 605 ELECTRICAL ENGINEERING DRAWING Akhil A. Balakrishnan 1 1 Department of Electrical & Electronics Engineering Jyothi Engineering College, Cheruthuruthy As on January 12, 2014 Akhil A. Balakrishnan
More informationINSTALLATION INSTRUCTIONS ATV SNOW PLOW Mounting Kit: PN Application: HONDA MODELS: 450S AND 450ES
INSTALLATION INSTRUCTIONS ATV SNOW PLOW Mounting Kit: PN 37852 Application: HONDA MODELS: 450S AND 450ES Your safety, and the safety of others, is very important. To help you make informed decisions about
More informationR310EN 2403 ( ) The Drive & Control Company
Feed Modules VKK R310EN 2403 (2008.09) The Drive & Control Company Linear Motion and Assembly Technologies Ball Rail Systems Roller Rail Systems Linear Bushings and Shafts Ball Screw Drives Linear Motion
More informationOur policy is one of continued research and development. We therefore reserve the right to
D/99000, D/99000 ompact cylinders on-magnetic and magnetic piston Double acting Ø 12 to 160 mm ight weight ompact design, which is considerably shorter than IS/VDA or FA equivalent. ow friction characteristics
More informationCOMPACT CYLINDERS SERIES CMPC Ø
T YIE EIE 0 ompact cylinder series available in numerous versions to meet a full range of requirements: With or without magnet ingle-acting extended rod, retracted or through-rod ual-acting non-rotating
More informationINSTALLATION INSTRUCTIONS ProVantage Plow Pulley Part Number: 84526
ProVantage Plow Pulley Part Number: 84526 GENERAL SAFETY PRECAUTIONS Your safety, and the safety of others, is very important. To help you make informed decisions about safety, we have provided installation
More informationRestoration of Bulle Clock Serial Number 7495
Page 1 Restored Bulle Restoration of Bulle Clock Serial Number 7495 Page 2 Restored Bulle Photos by kind permission of the owner. The clock as delivered Well this clock looks as though it s been through
More informationSHARK Snow Plow. 52 (132 cm) / 60 (152 cm) Complete system blade INSTRUCTIONS / ESTABLISHMENT
SHARK Snow Plow 52 (132 cm) / 60 (152 cm) Complete system blade INSTRUCTIONS / ESTABLISHMENT OPERATING INSTRUCTIONS Congratulations! You ve just purchased the most durable plow system in the industry.
More informationProject Name Structural Calculation for Feature Pressing
Project Name Structural Calculation for Feature Pressing Presented to: Client Logo Revision Generated by Date Reviewed by Date Comment 0 1 2 3 Table of Contents 1.0 Introduction & Loadings... 3 1.1 Introduction
More informationUNIVERSITY OF BOLTON SCHOOL OF ENGINEERING MSC SYSTEMS ENGINEERING AND ENGINEERING MANAGEMENT SEMESTER 2 EXAMINATION 2015/20016
TW63 UNIVERSITY OF BOLTON SCHOOL OF ENGINEERING MSC SYSTEMS ENGINEERING AND ENGINEERING MANAGEMENT SEMESTER 2 EXAMINATION 2015/20016 MONITORING OF MECHANICAL SYSTEMS MODULE NO: EEM7018 Date: Thursday 19
More informationKINEMATIC COUPLINGS. The good, the bad, the ugly MIT PSDAM AND PERG LABS
KINEMATIC COUPLINGS The good, the bad, the ugly. Defining constraint Clever use of constraint Penalties for over constraint Exact constraint (Kinematic) design Exact Constraint: Number of constraint points
More informationName (Print) ME Mechanics of Materials Exam # 2 Date: March 29, 2017 Time: 8:00 10:00 PM - Location: WTHR 200
Name (Print) (Last) (First) Instructions: ME 323 - Mechanics of Materials Exam # 2 Date: Time: 8:00 10:00 PM - Location: WTHR 200 Circle your lecturer s name and your class meeting time. Koslowski Zhao
More information