Our policy is one of continued research and development. We therefore reserve the right to
|
|
|
- Spencer Welch
- 5 years ago
- Views:
Transcription
1 D/99000, D/99000 ompact cylinders on-magnetic and magnetic piston Double acting Ø 12 to 160 mm ight weight ompact design, which is considerably shorter than IS/VDA or FA equivalent. ow friction characteristics for high speed operation Duralon rod bearing for reduced wear hrome plated stainless steel piston rods Technical data edium: ompressed air, filtered, lubricated or non-lubricated peration: D/99000 BS parallel ports, double acting, non-cushioned, metric threads D/99000 T ports, double acting, non-cushioned, inch threads perating pressure: 14,5 to 145 psig (1 to 10 bar) perating temperature: -25 F to +250 F (-32 to +121 ) onsult our Technical Service for use below 35 F (+2 ) ylinder diameters: 12, 16, 20, 25, 32, 40, 50, 63, 80, 100, 125, 140, 160 mm Strokes: See table on page on-standard strokes available on request aterials Barrel: hard anodized aluminium End caps: hard anodized aluminium alloy iston rod: stainless steel, hard chrome plated Elastomers: Buna Alternative cylinders See pages and rdering information To order a basic 25 mm bore cylinder with a magnetic piston and 10 mm stroke, female rod thread, BS parallel ports, quote: D/99025//10. To order a basic 40 mm bore cylinder with a magnetic piston and 5 mm stroke, female rod thread, T ports, quote: D/99040//5. ountings are included for cylinders up to Ø 100 mm. See odel codes table on page agnetically operated switches need to be ordered separately. Accessories Switches See pages and on-magnetic agnetic ur policy is one of continued research and development. e therefore reserve the right to amend, without notice, the specifications given in this document. /US
2 D/99000, D/99000 ylinder variants Symbol odel on-magnetic piston Symbol odel agnetic piston Description atalogue page D*/99000/ D*/99000/ D*/99000/E D*/99000/F TD*/99000/ D*/99000/J D*/99000/J D*/99000/ D*/99000/ D*/99000/E D*/99000/F TD*/99000/ D*/99000/J D*/99000/J Standard female thread ale rod thread, single rod Boss, rod end female thread Boss, cap end female thread igh temperature (Viton seals) Double ended piston rod, female thread Double ended piston rod, male thread 4 & 5 4 & & 7 6 & 7 D*/99000/1 D*/99000/2 on-rotating piston rod, female thread (Ø 12 to 100 mm) 8 & 9 D*/99000/3 D*/99000/4 ylinder with guided toolplate 12 D*/99000/5 D*/99000/6 on-rotating double ended piston rod, female thread 10 & 11 D*/99000/B D*/99000/B ylinder with bumpers both ends, female thread (standard on Ø 125, 140 & 160) 4 & 5 D*/99000/S D*/99000/S Adjustable stroke, single rod, female thread n request For combinations of alternative cylinders consult our Technical Service. ptions selector D /99 / / / Temperature igh temperature (Viton seals) orts Substitute T orts (inch threads, stroke in mm) BS parallel ports (metric ports & threads, stroke in mm) ylinder diameters (mm) Substitute Strokes: Substitute T Ø ounting ithout Foot Flange rod end Flange cap end IS Flange rod end IS Flange cap end Rear clevis Tapped holes - both ends Stroke (mm) 300 max. (see table below) Substitute one B I IB D A Variants (non-magnetic piston) Substitute Standard, female rod thread ale rod thread, single rod one Double ended piston rod, female rod thread J Double ended piston rod, male thread, both ends J on-rotating piston rod, female rod thread 1 ylinder with guided toolplate 3 Double ended piston rod, non-rotating, female rod thread 5 Boss, rod end, female rod thread E Boss, cap end, female rod thread F Bumpers on both ends, female rod thread (Ø mm) B Adjustable stroke, retract, single rod, female rod thread S Variants (magnetic piston) Substitute Standard, female rod thread ale rod thread, single rod Double ended piston rod, male thread, both ends J Double ended piston rod, female rod thread J on-rotating piston rod, female rod thread 2 ylinder with guided toolplate 4 Double ended piston rod, non-rotating, female rod thread 6 Boss, rod end, female rod thread E Boss, cap end, female rod thread F Bumpers on both ends, female rod thread (Ø mm) B Adjustable stroke, retract, single rod, female rod thread S For combinations of alternative cylinders consult our Technical Service. /US ur policy is one of continued research and development. e therefore reserve the right
3 D/99000, D/99000 Theoretical forces Air consumption Theoretical forces lb () at 87 psi (6 bar) Air consumption in 3 /in. stroke (l/cm stroke) at 87 psi (6 bar) Ø utstroke Instroke utstroke Instroke 12 14,8 (65,8) 11,3 (50,3) 1,24 (0,008) 1,09 (0,007) 16 27,0 (120,1) 20,1 (89,0) 2,17 (0,014) 1,71 (0,011) 20 42,6 (189,5) 32,2 (143,2) 3,41 (0,022) 2,64 (0,017) 25 66,1 (294,0) 51,3 (228,2) 5,43 (0,035) 4,19 (0,027) ,8 (484,0) 81,8 (363,9) 8,68 (0,056) 6,51 (0,042) ,7 (754,9) 142,7 (634,8) 13,64 (0,088) 11,47 (0,074) ,5 (1176,6) 222,7 (990,6) 21,39 (0,138) 17,98 (0,116) ,2 (1869,1) 378,5 (1683,7) 33,79 (0,218) 30,38 (0,196) ,7 (3014,6) 611,6 (2720,5) 54,56 (0,35) 49,29 (0,32) ,8 (4709,8) 964,0 (4288,1) 85,25 (0,55) 79,83 (0,52) ,7 (7360,5) 1517,3 (6749,3) 133,30 (0,86) 122,45 (0,79) ,8 (9233,6) 1938,4 (8622,4) 167,40 (1,08) 156,55 (1,01) ,8 (12062,7) 2542,1 (11307,8) 218,55 (1,41) 204,60 (1,32) ylinder weights Stroke (mm) Ø Additional weight for male thread Additional weight for magnetic piston 12 0,088 (0,04) 0,104 (0,05) 0,165 (0,08) 0,240 (0,11) 0,309 (0,14) 0,378 (0,17) ( ) ( ) 0,002 (0,004) 0,012 (0,03) 16 0,135 (0,06) 0,159 (0,07) 0,256 (0,12) 0,353 (0,16) 0,450 (0,20) 0,546 (0,25) ( ) ( ) 0,003 (0,007) 0,017 (0,04) 20 0,201 (0,09) 0,247 (0,11) 0,426 (0,19) 0,559 (0,25) 0,684 (0,31) 0,826 (0,38) ( ) ( ) 0,007 (0,015) 0,025 (0,05) 25 0,260 (0,12) 0,306 (0,14) 0,494 (0,22) 0,631 (0,29) 0,899 (0,41) 1,070 (0,48) ( ) ( ) 0,017 (0,040) 0,029 (0,06) 32 0,346 (0,16) 0,397 (0,18) 0,595 (0,27) 0,746 (0,34) 1,150 (0,52) 1,400 (0,64) 1,810 (0,82) 2,060 (0,94) 0,040 (0,090) 0,039 (0,09) 40 0,600 (0,27) 0,648 (0,29) 0,842 (0,38) 0,986 (0,45) 1,370 (0,62) 1,620 (0,73) 2,370 (1,08) 2,670 (1,21) 0,040 (0,090) 0,054 (0,12) 50 ( ) 0,884 (0,40) 1,210 (0,55) 1,460 (0,66) 2,110 (0,96) 2,430 (1,10) 4,070 (1,85) 4,550 (2,07) 0,080 (0,180) 0,080 (0,18) 63 ( ) 1,430 (0,65) 1,780 (0,81) 2,040 (0,93) 2,770 (1,26) 3,230 (1,46) 4,940 (2,24) 5,510 (2,50) 0,080 (0,180) 0,102 (0,24) 80 ( ) 3,180 (1,44) 3,980 (1,80) 4,570 (2,08) 6,240 (2,83) 7,270 (3,30) 7,700 (3,49) 8,520 (3,87) 0,160 (0,350) 0,143 (0,31) 100 ( ) 4,870 (2,21) 5,800 (2,63) 6,490 (2,95) 8,380 (3,80) 9,520 (4,32) 11,100 (5,04) 12,180 (5,53) 0,270 (0,600) 0,282 (0,62) 125 ( ) 12,08 (5,48) 13,23 (6,00) 14,37 (6,52) 15,81 (7,17) 17,22 (7,81) 18,65 (8,46) 20,08 (9,11) 0,31 (0,680) ( ) 140 ( ) 14,31 (6,49) 15,61 (7,08) 16,93 (7,68) 18,56 (8,42) 20,22 (9,17) 21,85 (9,91) 23,50 (10,66) 0,31 (0,680) ( ) 160 ( ) 19,75 (8,96) 21,32 (9,67) 22,91 (10,39) 24,89 (11,29) 26,87 (12,19) 28,86 (13,09) 30,84 (13,99) 0,48 (1,060) ( ) eights in lb (kg) lease note: estimated weights for single rod models Switches Female cordsets odel odel ength Reed /348/RSU/2,75 /348/SU/2,75 /348/EA/2,75 /348/EA/2,75 /348/RSU/ /348/SU/ /348/EA/ /348/EA/ /73326/1 1 m /73326/2 2 m /73326/5 5 m ote: uick disconnect styles are supplied with 6 inch pigtail with male connector. rder female cordsets separately. Solid state odel Reed Solid state Voltage V a.c. V d.c. urrent max. Temperature F ED Features able/plug length able type atalogue page /348/RSU/2, ma ( ) 9 ft. (2,75 m) 26-3 V /348/SU/2, ma ( ) 9 ft. (2,75 m) 26-3 V /348/EA/2, ma ( ) 9 ft. (2,75 m) 26-3 V /348/EA/2, ma ( ) 9 ft. (2,75 m) 26-3 V Full information on switches (technical data, cable materials, dimensions etc.) please refer to relevant catalogue pages ur policy is one of continued research and development. e therefore reserve the right /US
4 D/99000, D/99000 Basic dimensions D/99000/ (on-magnetic) Ø mm Ø mm 45 Section 45 E ø 12 = 65 ø 16 = 55 ø 20 = 55 ø 25 = 45 Section Ø mm Section Section ylinder with rod end male thread D*/ Ø mm 0,180 (4,6) Ø 80 0,098 (2,9) Ø 40 0,475 (12,1) Ø ,455 (11,6) Ø 32 AF Ø Stroke range A AF B Ø D E E1 E ,81 (20,5) 0,34 (8) 0,67 (17) 0,236 (6) 1,09 (27,7) 0,98 (25) 0,90 (23) ,87 (22) 0,34 (10) 0,73 (18,5) 0,315 (8) 1,25 (31,7) 1,14 (29) 1,07 (27,2) ,94 (24) 0,38 (13) 0,77 (19,5) 0,394 (10) ( ) 1,42 (36) 1,23 (31,2) ,08 (27,5) 0,43 (17) 0,86 (22,5) 0,472 (12) ( ) 1,57 (40) 1,45 (36,9) 32 5, ,18 (30) 0,50 (22) 0,91 (23) 0,603 (16) ( ) 1,75 (44,5) ( ) ,44 (36,5) 0,56 (22) 1,16 (29,5) 0,603 (16) ( ) 2,05 (52) ( ) ,52 (38,5) 0,75 (27) 1,20 (30,5) 0,787 (20) ( ) 2,51 (63,7) ( ) ,73 (44) 0,75 (27) 1,42 (36) 0,787 (20) ( ) 3,02 (76,7) ( ) ,11 (53,5) 0,93 (32) 1,71 (43,5) 0,984 (25) ( ) 3,85 (97,8) ( ) ,56 (65) 1,13 (46) 2,09 (53) 1,181 (30) ( ) 4,54 (115,3) ( ) ,90 (99) 1,13 (46) 3,27 (83) 1,417 (36) ( ) 5,59 (142) ( ) ,90 (99) 1,13 (46) 3,27 (83) 1,417 (36) ( ) 6,22 (158) ( ) ,25 (108) 1,35 (55) 3,58 (91) 1,575 (40) ( ) 7,01 (178) ( ) Ø Stroke range Ø I #8-32 x 0,21 (3 x 0,5-5 deep) #8-32 x 0,31 (5 x 0,8-9 deep) 1,24 (31,5) 0,20 (5) 0,14 (3,5) 0,45 (14) 0,87 (22) #8-32 x 0,21 (4 x 0,7-5 deep) #8-32 x 0,31 (6 x 1,0-10 deep) 1,46 (37,1) 0,24 (6) 0,14 (3,5) 0,45 (15,5) 1,10 (28) #10-32 x 0,28 (5 x 0,8-7 deep) #10-32 x 0,31 (8 x 1,25-12 deep) 1,85 (47) 0,31 (8) 0,18 (4,5) 0,49 (18,5) 1,42 (36) /4-28 x 0,39 (6 x 1,0-10 deep) 1/4-28 x 0,37 (10 x 1,25-15 deep) 2,02 (51,3) 0,39 (10) 0,20 (5) 0,57 (22,5) 1,57 (40) 32 5, /16-24 x 0,50 (8 x 1,25-12 deep) 5/16-24 x 0,50 (14 x 1,5-20,5 deep) 2,32 (58,9) 0,55 (14) 0,28 (7) 0,78 (28,5) 1,34 (34) /8-24 x 0,50 (8 x 1,25-12 deep) 3/8-24 x 0,63 (14 x 1,5-20,5 deep) 2,72 (69) 0,55 (14) 0,28 (7) 0,91 (28,5) 1,57 (40) /2-20 x 0,50 (10 x 1,5-12 deep) 1/2-20 x 0,77 (18 x 1,5-26 deep) 3,34 (84,9) 0,67 (17) 0,31 (8) 1,08 (33,5) 1,97 (50) /2-20 x 0,50 (10 x 1,5-12 deep) 1/2-20 x,77 (18 x 1,5-26 deep) 4,01 (101,8) 0,67 (17) 0,31 (8) 1,08 (33,5) 2,36 (60) /8-18 x 0,88 (16 x 2,0-22 deep) 5/8-18 x 1,00 (22 x 1,5-32,5 deep) 5,11 (129,8) 0,87 (22) 0,39 (10) 1,40 (43,5) 3,03 (77) /4-16 x 0,88 (20 x 2,5-22 deep) 3/4-16 x 1,12 (26 x 1,5-32,5 deep) 6,06 (153,9) 1,06 (27) 0,47 (12) 1,59 (43,5) 3,70 (94) /4-16 x 1,06 (22 x 2,5-27 deep) 3/4-16 x 1,12 (30 x 1,5-42 deep) 7,48 (190) 1,26 (32) 0,63 (16) 1,75 (58) 4,49 (114) /4-16 x 1,06 (22 x 2,5-27 deep) 3/4-16 x 1,12 (30 x 1,5-42 deep) 8,27 (210) 1,26 (32) 0,63 (16) 1,75 (58) 5,04 (128) /4-16 x 1,06 (24 x 3,0-27 deep) 3/4-16 x 1,12 (36 x 1,5-47 deep) 9,37 (238) 1,42 (36) 0,67 (17) 1,79 (64) 5,67 (144) Ø Stroke range Ø Ø * ,14 (3,5) 0,26 x 0,14 (6,5 x 3,5 deep) 5 x 0,8 0,28 (7) ( ) ( ) ,14 (3,5) 0,26 x 0,14 (6,5 x 3,5 deep) 5 x 0,8 0,31 (7,8) ( ) ( ) ,22 (5,5) 0,35 x 0,28 (9,0 x 7,0 deep) 5 x 0,8 0,32 (8,1) ( ) ( ) ,22 (5,5) 0,35 x 0,28 (9,0 x 7,0 deep) 5 x 0,8 0,33 (8,4) ( ) ( ) 32 5, ,22 (5,5) 0,35 x 0,28 (9,0 x 7,0 deep) 5 x 0,8 0,34 (8,7) 1,94 (49,3) 0,84 (21,4) ,22 (5,5) 0,35 x 0,28 (9,0 x 7,0 deep) 1/8* 0,36 (9,2) 2,24 (57) 0,84 (21,4) ,26 (6,5) 0,43 x 0,31 (11,0 x 8,0 deep) 1/4* 0,41 (10,5) 2,78 (70,6) 1,04 (26,5) ,35 (9) 0,55 x 0,41 (14,0 x 10,5 deep) 1/4* 0,45 (11,5) 3,29 (83,6) 1,04 (26,5) ,43 (11) 0,69 x 0,53 (17,5 x 13,5 deep) 3/8* 0,55 (14) 4,09 (104) 1,18 (30) ,43 (11) 0,69 x 0,53 (17,5 x 13,5 deep) 3/8* 0,71 (18) 4,8 (121,9) 1,18 (30) ,50 (12,7) 0,83 x 0,72 (21,2 x 18,4 deep) 3/8* 0,96 (24,5) 6,02 (153) 1,53 (39) ,50 (12,7) 0,83 x 0,72 (21,2 x 18,4 deep) 3/8* 0,96 (24,5) 6,61 (168) 1,53 (39) ,57 (14,5) 0,95 x 0,83 (24,2 x 21,2 deep) 3/8* 1,08 (27,5) 7,4 (188) 1,53 (39) * ort sizes: D/99000/... = (BS parallel ports), D/99000/... = T (T ports). ote: 5 x 0,8 port will accept #10-32 male thread fittings. /US ur policy is one of continued research and development. e therefore reserve the right
5 D/99000, D/99000 Basic dimensions D/99000/ (agnetic) Ø mm Ø mm Ø mm 0,28 (7) 45 E ø 12 = 65 ø 16 = 55 0,28 (7) mm Elect. 19 mm 25 mm Elect mm 45 0,28 (7) Section Section 0,180 (4,6) Ø 80 0,098 (2,9) Ø 40 0,475 (12,1) Ø ,455 (11,6) Ø 32 ø 20 = 55 ø 25 = 45 AF 25 mm Elect mm 0,28 (7) ylinder with rod end male thread D*/99000/ Ø mm mm Elect. 19 Elect. 19 mm Section Section Ø Stroke range A AF B Ø D E E1 E ,24 (31,5) 0,34 (8) 1,10 (28) 0,236 (6) 1,09 (27,7) 0,98 (25) 0,90 (23) ,34 (34) 0,34 (10) 1,20 (30,5) 0,315 (8) 1,25 (31,7) 1,14 (29) 1,07 (27,2) ,42 (36) 0,38 (13) 1,24 (31,5) 0,394 (10) ( ) 1,42 (36) 1,23 (31,2) ,48 (37,5) 0,43 (17) 1,28 (32,5) 0,472 (12) ( ) 1,57 (40) 1,45 (36,9) ,57 (40) 0,50 (22) 1,30 (33) 0,630 (16) ( ) 1,75 (44,5) ( ) ,83 (46,5) 0,56 (22) 1,56 (39,5) 0,630 (16) ( ) 2,05 (52) ( ) ,91 (48,5) 0,75 (27) 1,59 (40,5) 0,787 (20) ( ) 2,51 (63,7) ( ) ,13 (54) 0,75 (27) 1,81 (46) 0,787 (20) ( ) 3,02 (76,7) ( ) ,50 (63,5) 0,93 (32) 2,11 (53,5) 0,984 (25) ( ) 3,85 (97,8) ( ) ,95 (75) 1,13 (46) 2,48 (63) 1,181 (30) ( ) 4,54 (115,3) ( ) ,90 (99) 1,13 (46) 3,27 (83) 1,417 (36) ( ) 5,59 (142) ( ) ,90 (99) 1,13 (46) 3,27 (83) 1,417 (36) ( ) 6,22 (158) ( ) ,25 (108) 1,35 (55) 3,58 (91) 1,575 (40) ( ) 7,01 (178) ( ) Ø Stroke range Ø I #8-32 x 0,21 (3 x 0,5-5 deep) #8-32 x 0,31 (5 x 0,8-9 deep) 1,24 (31,5) 0,20 (5) 0,14 (3,5) 0,45 (14) 0,87 (22) #8-32 x 0,21 (4 x 0,7-5 deep) #8-32 x 0,31 (6 x 1,0-10 deep) 1,46 (37,1) 0,24 (6) 0,14 (3,5) 0,45 (15,5) 1,10 (28) #10-32 x 0,28 (5 x 0,8-7 deep) #10-32 x 0,31 (8 x 1,25-12 deep) 1,85 (47) 0,31 (8) 0,18 (4,5) 0,49 (18,5) 1,42 (36) /4-28 x 0,39 (6 x 1,0-10 deep) 1/4-28 x 0,37 (10 x 1,25-15 deep) 2,02 (51,3) 0,39 (10) 0,20 (5) 0,57 (22,5) 1,57 (40) /16-24 x 0,50 (8 x 1,25-12 deep) 5/16-24 x 0,50 (14 x 1,5-20,5 deep) 2,32 (58,9) 0,55 (14) 0,28 (7) 0,78 (28,5) 1,34 (34) /8-24 x 0,50 (8 x 1,25-12 deep) 3/8-24 x 0,63 (14 x 1,5-20,5 deep) 2,72 (69) 0,55 (14) 0,28 (7) 0,91 (28,5) 1,57 (40) /2-20 x 0,50 (10 x 1,5-12 deep) 1/2-20 x 0,77 (18 x 1,5-26 deep) 3,34 (84,9) 0,67 (17) 0,31 (8) 1,08 (33,5) 1,97 (50) /2-20 x 0,50 (10 x 1,5-12 deep) 1/2-20 x,77 (18 x 1,5-26 deep) 4,01 (101,8) 0,67 (17) 0,31 (8) 1,08 (33,5) 2,36 (60) /8-18 x 0,88 (16 x 2,0-22 deep) 5/8-18 x 1,00 (22 x 1,5-32,5 deep) 5,11 (129,8) 0,87 (22) 0,39 (10) 1,40 (43,5) 3,03 (77) /4-16 x 0,88 (20 x 2,5-22 deep) 3/4-16 x 1,12 (26 x 1,5-32,5 deep) 6,06 (153,9) 1,06 (27) 0,47 (12) 1,59 (43,5) 3,70 (94) /4-16 x 1,06 (22 x 2,5-27 deep) 3/4-16 x 1,12 (30 x 1,5-42 deep) 7,48 (190) 1,26 (32) 0,63 (16) 1,75 (58) 4,49 (114) /4-16 x 1,06 (22 x 2,5-27 deep) 3/4-16 x 1,12 (30 x 1,5-42 deep) 8,27 (210) 1,26 (32) 0,63 (16) 1,75 (58) 5,04 (128) /4-16 x 1,06 (24 x 3,0-27 deep) 3/4-16 x 1,12 (36 x 1,5-47 deep) 9,37 (238) 1,42 (36) 0,67 (17) 1,79 (64) 5,67 (144) Ø Stroke range Ø Ø * ,14 (3,5) 0,26 x 0,14 (6,5 x 3,5 deep) 5 x 0,8 0,28 (7) ( ) ( ) ,14 (3,5) 0,26 x 0,14 (6,5 x 3,5 deep) 5 x 0,8 0,31 (7,8) ( ) ( ) ,22 (5,5) 0,35 x 0,28 (9,0 x 7,0 deep) 5 x 0,8 0,32 (8,1) ( ) ( ) ,22 (5,5) 0,35 x 0,28 (9,0 x 7,0 deep) 5 x 0,8 0,33 (8,4) ( ) ( ) ,22 (5,5) 0,35 x 0,28 (9,0 x 7,0 deep) 1/8* 0,34 (8,7) 1,94 (49,3) 0,84 (21,4) ,22 (5,5) 0,35 x 0,28 (9,0 x 7,0 deep) 1/8* 0,36 (9,2) 2,24 (57) 0,84 (21,4) ,26 (6,6) 0,43 x 0,31 (11,0 x 8,0 deep) 1/4* 0,41 (10,5) 2,78 (70,6) 1,04 (26,5) ,35 (9) 0,55 x 0,41 (14,0 x 10,5 deep) 1/4* 0,45 (11,5) 3,29 (83,6) 1,04 (26,5) ,43 (11) 0,69 x 0,53 (17,5 x 13,5 deep) 3/8* 0,55 (14,0) 4,09 (104) 1,18 (30) ,43 (11) 0,69 x 0,53 (17,5 x 13,5 deep) 3/8* 0,71 (18) 4,80 (121,9) 1,18 (30) ,50 (12,7) 0,83 x 0,72 (21,2 x 18,4 deep) 3/8* 0,96 (24,5) 6,02 (153) 1,53 (39) ,50 (12,7) 0,83 x 0,72 (21,2 x 18,4 deep) 3/8* 0,96 (24,5) 6,61 (168) 1,53 (39) ,57 (14,5) 0,95 x 0,83 (24,2 x 21,2 deep) 3/8* 1,08 (27,5) 7,40 (188) 1,53 (39) * ort sizes: D/99000/... = (BS parallel ports), D/99000/... = T (T ports). ote: 5 x 0,8 port will accept #10-32 male thread fittings. ur policy is one of continued research and development. e therefore reserve the right /US
6 D/99000, D/99000 Double ended piston rod D/99000/J (on-magnetic) Ø mm 45 A + (2 x stroke ) + stroke Ø mm A + (2 x stroke ) + stroke Section 45 E ø 12 = 65 ø 16 = 55 ø 20 = 55 ø 25 = 45 Section Ø mm A + (2 x stroke ) + stroke * Section Section ylinders with rod end male thread D*/99000/J Ø mm 0,180 (4,6) Ø 80 0,098 (2,9) Ø 40 0,475 (12,1) Ø ,455 (11,6) Ø 32 AF Ø Stroke range A AF B Ø D E E1 E ,27 (32,2) 0,34 (8) 0,99 (25,2) 0,236 (6) 1,09 (27,7) 0,98 (25) 0,90 (23) ,30 (33,0) 0,34 (10) 1,02 (26,0) 0,315 (8) 1,25 (31,7) 1,14 (29) 1,07 (27,2) ,38 (35,0) 0,38 (13) 1,02 (26,0) 0,394 (10) ( ) 1,42 (36) 1,23 (31,2) ,54 (39,0) 0,43 (17) 1,14 (29,0) 0,472 (12) ( ) 1,57 (40) 1,45 (36,9) 32 5, ,75 (44,5) 0,50 (22) 1,20 (30,5) 0,630 (16) ( ) 1,75 (44,5) ( ) ,13 (54,0) 0,56 (22) 1,57 (40,0) 0,630 (16) ( ) 2,05 (52) ( ) ,22 (56,5) 0,75 (27) 1,59 (40,5) 0,787 (20) ( ) 2,51 (63,7) ( ) ,28 (58,0) 0,75 (27) 1,65 (42,0) 0,787 (20) ( ) 3,02 (76,7) ( ) ,80 (71,0) 0,93 (32) 2,01 (51,0) 0,984 (25) ( ) 3,85 (97,8) ( ) ,33 (84,5) 1,13 (46) 2,38 (60,5) 1,181 (30) ( ) 4,54 (115,3) ( ) ,53 (115) 1,13 (46) 3,27 (83,0) 1,417 (36) ( ) 5,59 (142) ( ) ,53 (115) 1,13 (46) 3,27 (83,0) 1,417 (36) ( ) 6,22 (158) ( ) ,92 (125) 1,35 (55) 3,58 (91,0) 1,575 (40) ( ) 7,01 (178) ( ) Ø Stroke range Ø I #8-32 x 0,21 deep (3 x 0,5-5) #8-32 x 0,31 (5 x 0,8-9) 1,24 (31,5) 0,20 (5) 0,14 (3,5) 0,45 (14) 0,87 (22) #8-32 x 0,21 deep (4 x 0,7-5) #8-32 x 0,31 (6 x 1,0-10) 1,46 (37,1) 0,24 (6) 0,14 (3,5) 0,45 (15,5) 1,10 (28) #10-32 x 0,28 deep (5 x 0,8-7) #10-32 x 0,31 (8 x 1,25-12) 1,85 (47) 0,31 (8) 0,18 (4,5) 0,49 (18,5) 1,42 (36) /4-28 x 0,39 deep (6 x 1,0-10) 1/4-28 x 0,37 (10 x 1,25-15) 2,02 (51,3) 0,39 (10) 0,20 (5) 0,57 (22,5) 1,57 (40) 32 5, /16-24 x 0,50 deep (8 x 1,25-12) 5/16-24 x 0,50 (14 x 1,5-20,5) 2,32 (58,9) 0,55 (14) 0,28 (7) 0,78 (28,5) 1,34 (34) /8-24 x 0,50 deep (8 x 1,25-12) 3/8-24 x 0,63 (14 x 1,5-20,5) 2,72 (69) 0,55 (14) 0,28 (7) 0,91 (28,5) 1,57 (40) /2-20 x 0,50 deep (10 x 1,5-12) 1/2-20 x 0,77 (18 x 1,5-26) 3,34 (84,9) 0,67 (17) 0,31 (8) 1,08 (33,5) 1,97 (50) /2-20 x 0,50 deep (10 x 1,5-12) 1/2-20 x,77 (18 x 1,5-26) 4,01 (101,8) 0,67 (17) 0,31 (8) 1,08 (33,5) 2,36 (60) /8-18 x 0,88 deep (16 x 2,0-22) 5/8-18 x 1,00 (22 x 1,5-32,5) 5,11 (129,8) 0,87 (22) 0,39 (10) 1,40 (43,5) 3,03 (77) /4-16 x 0,88 deep (20 x 2,5-22) 3/4-16 x 1,12 (26 x 1,5-32,5) 6,06 (153,9) 1,06 (27) 0,47 (12) 1,59 (43,5) 3,70 (94) /4-16 x 1,06 deep (22 x 2,5-27) 3/4-16 x 1,12 (30 x 1,5-42) 7,48 (190) 1,26 (32) 0,63 (16) 1,75 (58) 4,49 (114) /4-16 x 1,06 deep (22 x 2,5-27) 3/4-16 x 1,12 (30 x 1,5-42) 8,27 (210) 1,26 (32) 0,63 (16) 1,75 (58) 5,04 (128) /4-16 x 1,06 deep (24 x 3,0-27) 3/4-16 x 1,12 (36 x 1,5-47) 9,37 (238) 1,42 (36) 0,67 (17) 1,79 (64) 5,67 (144) Ø Stroke range Ø Ø * ,14 (3,5) 0,26 x 0,14 (6,5 x 3,5 deep) 5 x 0,8 0,28 (7,0) ( ) ( ) ,14 (3,5) 0,26 x 0,14 (6,5 x 3,5 deep) 5 x 0,8 0,31 (7,8) ( ) ( ) ,22 (5,5) 0,35 x 0,28 (9,0 x 7,0 deep) 5 x 0,8 0,32 (8,1) ( ) ( ) ,22 (5,5) 0,35 x 0,28 (9,0 x 7,0 deep) 5 x 0,8 0,33 (8,4) ( ) ( ) 32 5, ,22 (5,5) 0,35 x 0,28 (9,0 x 7,0 deep) 1/8* 0,34 (8,7) 1,94 (49,3) 0,84 (21,4) ,22 (5,5) 0,35 x 0,28 (9,0 x 7,0 deep) 1/8* 0,36 (9,2) 2,24 (57,0) 0,84 (21,4) ,26 (6,6) 0,43 x 0,31 (11,0 x 8,0 deep) 1/4* 0,41 (10,5) 2,78 (70,6) 1,04 (26,5) ,35 (9) 0,55 x 0,41 (14,0 x 10,5 deep) 1/4* 0,45 (11,5) 3,29 (83,6) 1,04 (26,5) ,43 (11) 0,69 x 0,53 (17,5 x 13,5 deep) 3/8* 0,55 (14,0) 4,09 (104) 1,18 (30,0) ,43 (11) 0,69 x 0,53 (17,5 x 13,5 deep) 3/8* 0,71 (18,0) 4,80 (121,9) 1,18 (30,0) ,50 (12,7) 0,83 x 0,72 (21,2 x 18,4 deep) 3/8* 0,96 (24,5) 6,02 (153) 1,53 (39,0) ,50 (12,7) 0,83 x 0,72 (21,2 x 18,4 deep) 3/8* 0,96 (24,5) 6,61 (168) 1,53 (39,0) ,57 (14,5) 0,95 x 0,83 (24,2 x 21,2 deep) 3/8* 1,08 (27,5) 7,40 (188) 1,53 (39,0) * ort sizes: D/99000/... = (BS parallel ports), D/99000/... = T (T ports). ote: 5 x 0,8 port will accept #10-32 male thread fittings. /US ur policy is one of continued research and development. e therefore reserve the right
7 D/99000, D/99000 Double ended piston rod D/99000/J (agnetic) Ø mm Ø mm 0,28 (7) 45 E ø 12 = 65 ø 16 = 55 A + (2 x stroke ) + stroke 25 mm Elect mm 45 0,28 (7) ø 20 = 55 ø 25 = 45 A + (2 x stroke) + stroke mm Elect. 19 Elect. 19 mm Section Section Ø mm 0,28 (7) A + (2 x stroke ) + stroke Reed Elect mm Elect. 19 mm Section ylinder with rod end male thread D*/99000/J Section Ø mm Ø Stroke range A AF B Ø D E E1 E ,55 (39,4) 0,34 (8) 1,28 (32,4) 0,236 (6) 1,09 (27,7) 0,98 (25) 0,90 (23) ,69 (43,0) 0,34 (10) 1,42 (36,0) 0,315 (8) 1,25 (31,7) 1,14 (29) 1,07 (27,2) ,85 (47,0) 0,38 (13) 1,50 (38,0) 0,394 (10) ( ) 1,42 (36) 1,23 (31,2) ,93 (49,0) 0,43 (17) 1,54 (39) 0,472 (12) ( ) 1,57 (40) 1,45 (36,9) ,15 (54,5) 0,50 (22) 1,59 (40,5) 0,630 (16) ( ) 1,75 (44,5) ( ) ,52 (64,0) 0,56 (22) 1,97 (50,0) 0,630 (16) ( ) 2,05 (52) ( ) ,62 (66,5) 0,75 (27) 1,99 (50,5) 0,787 (20) ( ) 2,51 (63,7) ( ) ,68 (68,0) 0,75 (27) 2,05 (52,0) 0,787 (20) ( ) 3,02 (76,7) ( ) ,19 (81,0) 0,93 (32) 2,40 (61,0) 0,984 (25) ( ) 3,85 (97,8) ( ) ,72 (94,5) 1,13 (46) 2,78 (70,5) 1,181 (30) ( ) 4,54 (115,3) ( ) ,53 (115) 1,13 (46) 3,27 (83,0) 1,417 (36) ( ) 5,59 (142) ( ) ,53 (115) 1,13 (46) 3,27 (83,0) 1,417 (36) ( ) 6,22 (158) ( ) ,92 (125) 1,35 (55) 3,58 (91,0) 1,575 (40) ( ) 7,01 (178) ( ) Ø Stroke range Ø I #8-32 x,21 (3 x 0,5-5 deep) #8-32 x 0,31 (5 x 0,8-9 deep) 1,24 (31,5) 0,20 (5) 0,14 (3,5) 0,45 (14) 0,87 (22) #8-32 x,21 (4 x 0,7-5 deep) #8-32 x 0,31 (6 x 1,0-10 deep) 1,46 (37,1) 0,24 (6) 0,14 (3,5) 0,45 (15,5) 1,10 (28) #10-32 x,28 (5 x 0,8-7 deep) #10-32 x 0,31 (8 x 1,25-12 deep) 1,85 (47) 0,31 (8) 0,18 (4,5) 0,49 (18,5) 1,42 (36) /4-28 x,39 (6 x 1,0-10 deep) 1/4-28 x 0,37 (10 x 1,25-15 deep) 2,02 (51,3) 0,39 (10) 0,20 (5) 0,57 (22,5) 1,57 (40) /16-24 x,50 (8 x 1,25-12 deep) 5/16-24 x 0,50 (14 x 1,5-20,5 deep) 2,32 (58,9) 0,55 (14) 0,28 (7) 0,78 (28,5) 1,34 (34) /8-24 x,50 (8 x 1,25-12 deep) 3/8-24 x 0,63 (14 x 1,5-20,5 deep) 2,72 (69) 0,55 (14) 0,28 (7) 0,91 (28,5) 1,57 (40) /2-20 x,50 (10 x 1,5-12 deep) 1/2-20 x 0,77 (18 x 1,5-26 deep) 3,34 (84,9) 0,67 (17) 0,31 (8) 1,08 (33,5) 1,97 (50) /2-20 x,50 (10 x 1,5-12 deep) 1/2-20 x,77 (18 x 1,5-26 deep) 4,01 (101,8) 0,67 (17) 0,31 (8) 1,08 (33,5) 2,36 (60) /8-18 x,88 (16 x 2,0-22 deep) 5/8-18 x 1,00 (22 x 1,5-32,5 deep) 5,11 (129,8) 0,87 (22) 0,39 (10) 1,40 (43,5) 3,03 (77) /4-16 x,88 (20 x 2,5-22 deep) 3/4-16 x 1,12 (26 x 1,5-32,5 deep) 6,06 (153,9) 1,06 (27) 0,47 (12) 1,59 (43,5) 3,70 (94) /4-16 x 1,06 (22 x 2,5-27 deep) 3/4-16 x 1,12 (30 x 1,5-42 deep) 7,48 (190) 1,26 (32) 0,63 (16) 1,75 (58) 4,49 (114) /4-16 x 1,06 (22 x 2,5-27 deep) 3/4-16 x 1,12 (30 x 1,5-42 deep) 8,27 (210) 1,26 (32) 0,63 (16) 1,75 (58) 5,04 (128) /4-16 x 1,06 (24 x 3,0-27 deep) 3/4-16 x 1,12 (36 x 1,5-47 deep) 9,37 (238) 1,42 (36) 0,67 (17) 1,79 (64) 5,67 (144) Ø Stroke range Ø Ø * ,14 (3,5) 0,26 x 0,14 (6,5 x 3,5 deep) 5 x 0,8 0,28 (7,0) ( ) ( ) ,14 (3,5) 0,26 x 0,14 (6,5 x 3,5 deep) 5 x 0,8 0,31 (7,8) ( ) ( ) ,22 (5,5) 0,35 x 0,28 (9,0 x 7,0 deep) 5 x 0,8 0,32 (8,1) ( ) ( ) ,22 (5,5) 0,35 x 0,28 (9,0 x 7,0 deep) 5 x 0,8 0,33 (8,4) ( ) ( ) ,22 (5,5) 0,35 x 0,28 (9,0 x 7,0 deep) 1/8* 0,34 (8,7) 1,94 (49,3) 0,84 (21,4) ,22 (5,5) 0,35 x 0,28 (9,0 x 7,0 deep) 1/8* 0,36 (9,2) 2,24 (57,0) 0,84 (21,4) ,26 (6,6) 0,43 x 0,31 (11,0 x 8,0 deep) 1/4* 0,41 (10,5) 2,78 (70,6) 1,04 (26,5) ,35 (9) 0,55 x 0,41 (14,0 x 10,5 deep) 1/4* 0,45 (11,5) 3,29 (83,6) 1,04 (26,5) ,43 (11) 0,69 x 0,53 (17,5 x 13,5 deep) 3/8* 0,55 (14,0) 4,09 (104) 1,18 (30,0) ,43 (11) 0,69 x 0,53 (17,5 x 13,5 deep) 3/8* 0,71 (18,0) 4,80 (121,9) 1,18 (30,0) ,50 (12,7) 0,83 x 0,72 (21,2 x 18,4 deep) 3/8* 0,96 (24,5) 6,02 (153) 1,53 (39,0) ,50 (12,7) 0,83 x 0,72 (21,2 x 18,4 deep) 3/8* 0,96 (24,5) 6,61 (168) 1,53 (39,0) ,57 (14,5) 0,95 x 0,83 (24,2 x 21,2 deep) 3/8* 1,08 (27,5) 7,40 (188) 1,53 (39,0) * ort sizes: D/99000/... = (BS parallel ports), D/99000/... = T (T ports). ote: 5 x 0,8 port will accept #10-32 male thread fittings. 0,180 (4,6) Ø 80 0,098 (2,9) Ø 40 0,475 (12,1) Ø ,455 (11,6) Ø 32 ur policy is one of continued research and development. e therefore reserve the right /US AF 0,28 (7) Elect. Reed 1925 mm Elect. mm
8 D/99000, D/99000 ylinders with non-rotating piston rod D/99000/1 (on-magnetic) Ø mm Ø mm E 0,20 (5) 0,20 (5) Section Section Ø 32 mm Ø mm 0,35 (9) Section Section ARI: This cylinder has a non-rotating rod. To prevent internal damage hold rod by flats E FU RETRATED while installing or removing attachments. D T SRAT R DET SAFT. 0,180 (4,6) Ø 80 0,098 (2,9) Ø 40 0,475 (12,1) Ø ,455 (11,6) Ø 32 Ø Stroke range A AF B Ø D E E1 E ,00 (25,5) 0,34 (8) 0,87 (22,0) 0,236 (6) 1,09 (27,7) 0,98 (25) 0,90 (23) 0,059 (1,5) ,06 (27,0) 0,34 (10) 0,93 (23,5) 0,315 (8) 1,25 (31,7) 1,14 (29) 1,07 (27,2) 0,059 (1,5) ,26 (32,0) 0,38 (13) 1,08 (27,5) 0,394 (10) ( ) 1,42 (36) 1,23 (31,2) 0,079 (2,0) ,40 (35,5) 0,43 (17) 1,20 (30,5) 0,472 (12) ( ) 1,57 (40) 1,45 (36,9) 0,079 (2,0) 32 5, ,54 (39,0) 0,50 (22) 1,26 (32,0) 0,630 (16) ( ) 1,75 (44,5) ( ) 0,079 (2,0) ,44 (36,5) 0,56 (22) 1,16 (29,5) 0,630 (16) ( ) 2,05 (52) ( ) 0,079 (2,0) ,52 (38,5) 0,75 (27) 1,20 (30,5) 0,787 (20) ( ) 2,51 (63,7) ( ) 0,079 (2,0) ,73 (44,0) 0,75 (27) 1,42 (36,0) 0,787 (20) ( ) 3,02 (76,7) ( ) 0,079 (2,0) ,11 (53,5) 0,93 (32) 1,71 (43,5) 0,984 (25) ( ) 3,85 (97,8) ( ) 0,079 (2,0) ,56 (65,0) 1,13 (46) 2,09 (53,0) 1,181 (30) ( ) 4,54 (115,3) ( ) 0,079 (2,0) Ø Stroke range Ø I Ø #8-32 x 0,21 (3 x 0,5-5 deep) #8-32 x 0,31 (5 x 0,8-9 deep) 1,24 (31,5) 0,20 (5,2) 0,14 (3,5) 0,45 (14) 0,87 (22) 0,14 (3,5) #8-32 x 0,21 (4 x 0,7-5 deep) #8-32 x 0,31 (6 x 1,0-10 deep) 1,46 (37,1) 0,24 (6) 0,14 (3,5) 0,45 (15,5) 1,10 (28) 0,14 (3,5) #10-32 x 0,28 (5 x 0,8-7 deep) #10-32 x 0,31 (8 x 1,25-12 deep) 1,85 (47) 0,31 (8) 0,18 (4,5) 0,49 (18,5) 1,42 (36) 0,22 (5,5) /4-28 x 0,39 (6 x 1,0-10 deep) 1/4-28 x 0,37 (10 x 1,25-15 deep) 2,02 (51,3) 0,39 (10) 0,20 (5) 0,57 (22,5) 1,57 (40) 0,22 (5,5) 32 5, /16-24 x 0,50 (8 x 1,25-12 deep) 5/16-24 x 0,50 (14 x 1,5-20,5 deep) 2,32 (58,9) 0,55 (14) 0,28 (7) 0,78 (28,5) 1,34 (34) 0,22 (5,5) /8-24 x 0,50 (8 x 1,25-12 deep) 3/8-24 x 0,63 (14 x 1,5-20,5 deep) 2,72 (69) 0,55 (14) 0,28 (7) 0,91 (28,5) 1,57 (40) 0,22 (5,5) /2-20 x 0,50 (10 x 1,5-12 deep) 1/2-20 x 0,77 (18 x 1,5-26 deep) 3,34 (84,9) 0,71 (18) 0,31 (8) 1,08 (33,5) 1,97 (50) 0,26 (6,6) /2-20 x 0,50 (10 x 1,5-12 deep) 1/2-20 x,77 (18 x 1,5-26 deep) 4,01 (101,8) 0,71 (18) 0,31 (8) 1,08 (33,5) 2,36 (60) 0,35 (9) /8-18 x 0,88 (16 x 2,0-22 deep) 5/8-18 x 1,00 (22 x 1,5-32,5 deep) 5,11 (129,8) 0,87 (22) 0,39 (10) 1,40 (43,5) 3,03 (77) 0,43 (11) /4-16 x 0,88 (20 x 2,5-22 deep) 3/4-16 x 1,12 (26 x 1,5-32,5 deep) 6,06 (153,9) 1,06 (27) 0,47 (12) 1,59 (43,5) 3,7 (94) 0,43 (11) Ø Stroke range Ø * Ø T ,26 x 0,14 (6,5 x 3,5) 5 x 0,8 0,28 (7,0) 0,591 ±0,002 (15 ±0,043) ( ) ( ) ,26 x 0,14 (6,5 x 3,5) 5 x 0,8 0,31 (7,8) 0,787 ±0,002 (20 ±0,052) ( ) ( ) ,35 x 0,28 (9,0 x 7,0) 5 x 0,8 0,32 (8,1) 0,512 ±0,002 (13 ±0,043) ( ) ( ) ,35 x 0,28 (9,0 x 7,0) 5 x 0,8 0,33 (8,4) 0,591 ±0,002 (15 ±0,043) ( ) ( ) 32 5, ,35 x 0,28 (9,0 x 7,0) 5 x 0,8 0,34 (8,7) 0,827 ±0,002 (21 ±0,062) 1,94 (49,3) 0,84 (21,4) ,35 x 0,28 (9,0 x 7,0) 1/8* 0,36 (9,2) 1,102 ±0,002 (28 ±0,062) 2,24 (57,0) 0,84 (21,4) ,43 x 0,31 (11,0 x 8,0) 1/4* 0,41 (10,5) 1,378 ±0,002 (35 ±0,062) 2,78 (70,6) 1,04 (26,5) ,55 x 0,41 (14,0 x 10,5) 1/4* 0,45 (11,5) 1,378 ±0,002 (35 ±0,062) 3,29 (83,6) 1,04 (26,5) ,69 x 0,53 (17,5 x 13,5) 3/8* 0,55 (14,0) 1,693 ±0,002 (43 ±0,062) 4,09 (104) 1,18 (30,0) ,69 x 0,53 (17,5 x 13,5) 3/8* 0,71 (18,0) 2,323 ±0,003 (59 ±0,074) 4,8 (121,9) 1,18 (30,0) * ort sizes: D/99000/... = (BS parallel ports), D/99000/... = T (T ports). ote: 5 x 0,8 port will accept #10-32 male thread fittings. on-rotation accuracy Ø ±2 ±1 ±1 ±1 ±0.8 ±0.8 ±0.8 ±0.8 ±0.8 ±0.8 /US ur policy is one of continued research and development. e therefore reserve the right
9 D/99000, D/99000 ylinders with non-rotating piston rod D/99000/2 (agnetic) Ø mm Ø mm E mm 0,20 (5) Elect mm 0,20 (5) mm Elect mm Section Section Ø 32 mm 0,28 (7) Elect. Reed 1925 mm Elect. 19 mm Ø mm 0,35 (9) 0,28 (7) Elect. Reed mm Elect. 19 mm Section Section ARI: This cylinder has a non-rotating rod. To prevent internal damage hold rod by flats E FU RETRATED while installing or removing attachments. D T SRAT R DET SAFT. 0,180 (4,6) Ø 80 0,098 (2,9) Ø 40 0,475 (12,1) Ø ,455 (11,6) Ø 32 Ø Stroke range A AF B Ø D E E1 E ,44 (36,5) 0,34 (8) 1,30 (33,0) 0,236 (6) 1,09 (27,7) 0,98 (25) 0,90 (23) 0,059 (1,5) ,54 (39,0) 0,34 (10) 1,40 (35,5) 0,315 (8) 1,25 (31,7) 1,14 (29 ) 1,07 (27,2) 0,059 (1,5) ,73 (44,0) 0,38 (13) 1,56 (39,5) 0,394 (10) ( ) 1,42 (36) 1,23 (31,2) 0,079 (2,0) ,79 (45,5) 0,43 (17) 1,59 (40,5) 0,472 (12) ( ) 1,57 (40) 1,45 (36,9) 0,079 (2,0) 32 5, ,93 (49,0) 0,50 (22) 1,65 (42,0) 0,630 (16) ( ) 1,75 (44,5) ( ) 0,079 (2,0) ,83 (46,5) 0,56 (22) 1,56 (39,5) 0,630 (16) ( ) 2,05 (52) ( ) 0,079 (2,0) ,91 (48,5) 0,75 (27) 1,59 (40,5) 0,787 (20) ( ) 2,51 (63,7) ( ) 0,079 (2,0) ,13 (54,0) 0,75 (27) 1,81 (46,0) 0,787 (20) ( ) 3,02 (76,7) ( ) 0,079 (2,0) ,50 (63,5) 0,93 (32) 2,11 (53,5) 0,984 (25) ( ) 3,85 (97,8) ( ) 0,079 (2,0) ,95 (75,0) 1,13 (46) 2,48 (63,0) 1,181 (30) ( ) 4,54 (115,3) ( ) 0,079 (2,0) Ø Stroke range Ø I Ø #8-32 x 0,21 (3 x 0,5-5 deep) #8-32 x 0,31 (5 x 0,8-9 deep) 1,24 (31,5) 0,20 (5,2 ) 0,14 (3,5) 0,45 (14) 0,87 (22 ) 0,14 (3,5) #8-32 x 0,21 (4 x 0,7-5 deep) #8-32 x 0,31 (6 x 1,0-10 deep) 1,46 (37,1) 0,24 (6 ) 0,14 (3,5) 0,45 (15,5) 1,10 (28) 0,14 (3,5) #10-32 x 0,28 (5 x 0,8-7 deep) #10-32 x 0,31 (8 x 1,25-12 deep) 1,85 (47) 0,31 (8 ) 0,18 (4,5) 0,49 (18,5) 1,42 (36 ) 0,22 (5,5) /4-28 x 0,39 (6 x 1,0-10 deep) 1/4-28 x 0,37 (10 x 1,25-15 deep) 2,02 (51,3) 0,39 (10) 0,20 (5) 0,57 (22,5) 1,57 (40) 0,22 (5,5) 32 5, /16-24 x 0,50 (8 x 1,25-12 deep) 5/16-24 x 0,50 (14 x 1,5-20,5 deep) 2,32 (58,9) 0,55 (14 ) 0,28 (7 ) 0,78 (28,5) 1,34 (34 ) 0,22 (5,5) /8-24 x 0,50 (8 x 1,25-12 deep) 3/8-24 x 0,63 (14 x 1,5-20,5 deep) 2,72 (69) 0,55 (14 ) 0,28 (7 ) 0,91 (28,5) 1,57 (40 ) 0,22 (5,5) /2-20 x 0,50 (10 x 1,5-12 deep) 1/2-20 x 0,77 (18 x 1,5-26 deep) 3,34 (84,9) 0,71 (18 ) 0,31 (8 ) 1,08 (33,5) 1,97 (50) 0,26 (6,6 ) /2-20 x 0,50 (10 x 1,5-12 deep) 1/2-20 x,77 (18 x 1,5-26 deep) 4,01 (101,8) 0,71 (18 ) 0,31 (8 ) 1,08 (33,5) 2,36 (60) 0,35 (9) /8-18 x 0,88 (16 x 2,0-22 deep) 5/8-18 x 1,00 (22 x 1,5-32,5 deep) 5,11 (129,8) 0,87 (22 ) 0,39 (10) 1,40 (43,5) 3,03 (77) 0,43 (11) /4-16 x 0,88 (20 x 2,5-22 deep) 3/4-16 x 1,12 (26 x 1,5-32,5 deep) 6,06 (153,9) 1,06 (27 ) 0,47 (12 ) 1,59 (43,5) 3,7 (94 ) 0,43 (11) Ø Stroke range Ø * Ø T ,26 x 0,14 (6,5 x 3,5) 5 x 0,8 0,28 (7,0) 0,591 ±0,002 (15 ±0,043) ( ) ( ) ,26 x 0,14 (6,5 x 3,5) 5 x 0,8 0,31 (7,8) 0,787 ±0,002 (20 ±0,052) ( ) ( ) ,35 x 0,28 (9,0 x 7,0) 5 x 0,8 0,32 (8,1) 0,512 ±0,002 (13 ±0,043) ( ) ( ) ,35 x 0,28 (9,0 x 7,0) 5 x 0,8 0,33 (8,4) 0,591 ±0,002 (15 ±0,043) ( ) ( ) 32 5, ,35 x 0,28 (9,0 x 7,0) 5 x 0,8 0,34 (8,7) 0,827 ±0,002 (21 ±0,062) 1,94 (49,3) 0,84 (21,4) ,35 x 0,28 (9,0 x 7,0) 1/8* 0,36 (9,2) 1,102 ±0,002 (28 ±0,062) 2,24 (57,0) 0,84 (21,4) ,43 x 0,31 (11,0 x 8,0) 1/4* 0,41 (10,5) 1,378 ±0,002 (35 ±0,062) 2,78 (70,6) 1,04 (26,5) ,55 x 0,41 (14,0 x 10,5) 1/4* 0,45 (11,5) 1,378 ±0,002 (35 ±0,062) 3,29 (83,6) 1,04 (26,5) ,69 x 0,53 (17,5 x 13,5) 3/8* 0,55 (14,0) 1,693 ±0,002 (43 ±0,062) 4,09 (104) 1,18 (30,0) ,69 x 0,53 (17,5 x 13,5) 3/8* 0,71 (18,0) 2,323 ±0,003 (59 ±0,074) 4,8 (121,9) 1,18 (30,0) * ort sizes: D/99000/... = (BS parallel ports), D/99000/... = T (T ports). ote: 5 x 0,8 port will accept #10-32 male thread fittings. on-rotation accuracy Ø ±2 ±1 ±1 ±1 ±0.8 ±0.8 ±0.8 ±0.8 ±0.8 ±0.8 ur policy is one of continued research and development. e therefore reserve the right /US
10 D/99000, D/99000 ylinders with non-rotating piston rod D/99000/5 (on-magnetic) Ø mm E 0,20 (5) Ø mm 5 Section Section Ø 32 mm 9 (0,35) Ø mm A + (2 x stroke ) + stroke Section Section ARI: This cylinder has a non-rotating rod. To prevent internal damage hold rod by flats E FU RETRATED while installing or removing attachments. D T SRAT R DET SAFT. 0,180 (4,6) Ø 80 0,098 (2,9) Ø 40 0,475 (12,1) Ø ,455 (11,6) Ø 32 Ø Stroke range A AF B Ø D E E1 E ,46 (37,2) 0,34 (8) 1,19 (30,2) 0,236 (6) 1,09 (27,7) 0,98 (25) 0,90 (23) 0,059 (1,5) ,50 (38,0) 0,34 (10) 1,22 (31,0) 0,315 (8) 1,25 (31,7) 1,14 (29) 1,07 (27,2) 0,059 (1,5) ,69 (43,0) 0,38 (13) 1,34 (34,0) 0,394 (10) ( ) 1,42 (36) 1,23 (31,2) 0,079 (2,0) ,85 (47,0) 0,43 (17) 1,46 (37,0) 0,472 (12) ( ) 1,57 (40) 1,45 (36,9) 0,079 (2,0) 32 5, ,11 (53,5) 0,50 (22) 1,56 (39,5) 0,630 (16) ( ) 1,75 (44,5) ( ) 0,079 (2,0) ,13 (54,0) 0,56 (22) 1,57 (40,0) 0,630 (16) ( ) 2,05 (52) ( ) 0,079 (2,0) ,22 (56,5) 0,75 (27) 1,59 (40,5) 0,787 (20) ( ) 2,51 (63,7) ( ) 0,079 (2,0) ,28 (58,0) 0,75 (27) 1,65 (42,0) 0,787 (20) ( ) 3,02 (76,7) ( ) 0,079 (2,0) ,80 (71,0) 0,93 (32) 2,01 (51,0) 0,984 (25) ( ) 3,85 (97,8) ( ) 0,079 (2,0) ,33 (84,5) 1,13 (46) 2,38 (60,5) 1,181 (30) ( ) 4,54 (115,3) ( ) 0,079 (2,0) Ø Stroke range Ø I Ø #8-32 x 0,21 (3 x 0,5-5 deep) #8-32 x 0,31 (5 x 0,8-9 deep) 1,24 (31,5) 0,20 (5,2) 0,14 (3,5) 0,45 (14) 0,87 (22) 0,14 (3,5) #8-32 x 0,21 (4 x 0,7-5 deep) #8-32 x 0,31 (6 x 1,0-10 deep) 1,46 (37,1) 0,24 (6) 0,14 (3,5) 0,45 (15,5) 1,10 (28) 0,14 (3,5) #10-32 x 0,28 (5 x 0,8-7 deep) #10-32 x 0,31 (8 x 1,25-12 deep) 1,85 (47) 0,31 (8) 0,18 (4,5) 0,49 (18,5) 1,42 (36) 0,22 (5,5) /4-28 x 0,39 (6 x 1,0-10 deep) 1/4-28 x 0,37 (10 x 1,25-15 deep) 2,02 (51,3) 0,39 (10) 0,20 (5) 0,57 (22,5) 1,57 (40) 0,22 (5,5) 32 5, /16-24 x 0,50 (8 x 1,25-12 deep) 5/16-24 x 0,50 (14 x 1,5-20,5 deep) 2,32 (58,9) 0,55 (14) 0,28 (7) 0,78 (28,5) 1,34 (34) 0,22 (5,5) /8-24 x 0,50 (8 x 1,25-12 deep) 3/8-24 x 0,63 (14 x 1,5-20,5 deep) 2,72 (69) 0,55 (14) 0,28 (7) 0,91 (28,5) 1,57 (40) 0,22 (5,5) /2-20 x 0,50 (10 x 1,5-12 deep) 1/2-20 x 0,77 (18 x 1,5-26 deep) 3,34 (84,9) 0,71 (18) 0,31 (8) 1,08 (33,5) 1,97 (50) 0,26 (6,6) /2-20 x 0,50 (10 x 1,5-12 deep) 1/2-20 x,77 (18 x 1,5-26 deep) 4,01 (101,8) 0,71 (18) 0,31 (8) 1,08 (33,5) 2,36 (60) 0,35 (9) /8-18 x 0,88 (16 x 2,0-22 deep) 5/8-18 x 1,00 (22 x 1,5-32,5 deep) 5,11 (129,8) 0,87 (22) 0,39 (10) 1,40 (43,5) 3,03 (77) 0,43 (11) /4-16 x 0,88 (20 x 2,5-22 deep) 3/4-16 x 1,12 (26 x 1,5-32,5 deep) 6,06 (153,9) 1,06 (27) 0,47 (12) 1,59 (43,5) 3,7 (94) 0,43 (11) Ø Stroke range Ø * Ø T ,26 x 0,14 (6,5 x 3,5) 5 x 0,8 0,28 (7,0) 0,591 ±0,002 (15 ±0,043) ( ) ( ) ,26 x 0,14 (6,5 x 3,5) 5 x 0,8 0,31 (7,8) 0,787 ±0,002 (20 ±0,052) ( ) ( ) ,35 x 0,28 (9,0 x 7,0) 5 x 0,8 0,32 (8,1) 0,512 ±0,002 (13 ±0,043) ( ) ( ) ,35 x 0,28 (9,0 x 7,0) 5 x 0,8 0,33 (8,4) 0,591 ±0,002 (15 ±0,043) ( ) ( ) 32 5, ,35 x 0,28 (9,0 x 7,0) 5 x 0,8 0,34 (8,7) 0,827 ±0,002 (21 ±0,062) 1,94 (49,3) 0,84 (21,4) ,35 x 0,28 (9,0 x 7,0) 1/8* 0,36 (9,2) 1,102 ±0,002 (28 ±0,062) 2,24 (57,0) 0,84 (21,4) ,43 x 0,31 (11,0 x 8,0) 1/4* 0,41 (10,5) 1,378 ±0,002 (35 ±0,062) 2,78 (70,6) 1,04 (26,5) ,55 x 0,41 (14,0 x 10,5) 1/4* 0,45 (11,5) 1,378 ±0,002 (35 ±0,062) 3,29 (83,6) 1,04 (26,5) ,69 x 0,53 (17,5 x 13,5) 3/8* 0,55 (14,0) 1,693 ±0,002 (43 ±0,062) 4,09 (104) 1,18 (30,0) ,69 x 0,53 (17,5 x 13,5) 3/8* 0,71 (18,0) 2,323 ±0,003 (59 ±0,074) 4,8 (121,9) 1,18 (30,0) * ort sizes: D/99000/... = (BS parallel ports), D/99000/... = T (T ports). ote: 5 x 0,8 port will accept #10-32 male thread fittings. on-rotation accuracy Ø ±2 ±1 ±1 ±1 ±0.8 ±0.8 ±0.8 ±0.8 ±0.8 ±0.8 /US ur policy is one of continued research and development. e therefore reserve the right
11 D/99000, D/99000 ylinders with non-rotating piston rod D/99000/6 (agnetic) Ø mm E Elect. Reed mm 0,20 (5) Elect. 19 mm Ø mm 0,20 (5) 25 mm Elect mm Section Section Ø 32 mm 0,28 (7) Ø mm A + (2 x stroke ) + stroke Section 0,35 (9) 25 mm Elect mm 0,28 (7) Reed Elect mm Elect. 19 mm Section ARI: This cylinder has a non-rotating rod. To prevent internal damage hold rod by flats E FU RETRATED while installing or removing attachments. D T SRAT R DET SAFT. 0,180 (4,6) Ø 80 0,098 (2,9) Ø 40 0,475 (12,1) Ø ,455 (11,6) Ø 32 Ø Stroke range A AF B Ø D E E1 E ,75 (44,4) 0,34 (8) 1,47 (37,4) 0,236 (6) 1,09 (27,7) 0,98 (25) 0,90 (23) 0,059 (1,5) ,89 (48,0) 0,34 (10) 1,61 (41,0) 0,315 (8) 1,25 (31,7) 1,14 (29) 1,07 (27,2) 0,059 (1,5) ,17 (55,0) 0,38 (13) 1,81 (46,0) 0,394 (10) ( ) 1,42 (36) 1,23 (31,2) 0,079 (2,0) ,24 (57,0) 0,43 (17) 1,85 (47,0) 0,472 (12) ( ) 1,57 (40) 1,45 (36,9) 0,079 (2,0) 32 5, ,50 (63,5) 0,50 (22) 1,95 (49,5) 0,630 (16) ( ) 1,75 (44,5) ( ) 0,079 (2,0) ,52 (64,0) 0,56 (22) 1,97 (50,0) 0,630 (16) ( ) 2,05 (52) ( ) 0,079 (2,0) ,62 (66,5) 0,75 (27) 1,99 (50,5) 0,787 (20) ( ) 2,51 (63,7) ( ) 0,079 (2,0) ,68 (68,0) 0,75 (27) 2,05 (52,0) 0,787 (20) ( ) 3,02 (76,7) ( ) 0,079 (2,0) ,19 (81,0) 0,93 (32) 2,40 (61,0) 0,984 (25) ( ) 3,85 (97,8) ( ) 0,079 (2,0) ,72 (94,5) 1,13 (46) 2,78 (70,5) 1,181 (30) ( ) 4,54 (115,3) ( ) 0,079 (2,0) Ø Stroke range Ø I Ø #8-32 x 0,21 (3 x 0,5-5 deep) #8-32 x 0,31 (5 x 0,8-9 deep) 1,24 (31,5) 0,20 (5,2) 0,14 (3,5) 0,45 (14) 0,87 (22) 0,14 (3,5) #8-32 x 0,21 (4 x 0,7-5 deep) #8-32 x 0,31 (6 x 1,0-10 deep) 1,46 (37,1) 0,24 (6) 0,14 (3,5) 0,45 (15,5) 1,10 (28) 0,14 (3,5) #10-32 x 0,28 (5 x 0,8-7 deep) #10-32 x 0,31 (8 x 1,25-12 deep) 1,85 (47) 0,31 (8) 0,18 (4,5) 0,49 (18,5) 1,42 (36) 0,22 (5,5) /4-28 x 0,39 (6 x 1,0-10 deep) 1/4-28 x 0,37 (10 x 1,25-15 deep) 2,02 (51,3) 0,39 (10) 0,20 (5) 0,57 (22,5) 1,57 (40) 0,22 (5,5) 32 5, /16-24 x 0,50 (8 x 1,25-12 deep) 5/16-24 x 0,50 (14 x 1,5-20,5 deep) 2,32 (58,9) 0,55 (14) 0,28 (7) 0,78 (28,5) 1,34 (34) 0,22 (5,5) /8-24 x 0,50 (8 x 1,25-12 deep) 3/8-24 x 0,63 (14 x 1,5-20,5 deep) 2,72 (69) 0,55 (14) 0,28 (7) 0,91 (28,5) 1,57 (40) 0,22 (5,5) /2-20 x 0,50 (10 x 1,5-12 deep) 1/2-20 x 0,77 (18 x 1,5-26 deep) 3,34 (84,9) 0,71 (18) 0,31 (8) 1,08 (33,5) 1,97 (50) 0,26 (6,6) /2-20 x 0,50 (10 x 1,5-12 deep) 1/2-20 x,77 (18 x 1,5-26 deep) 4,01 (101,8) 0,71 (18) 0,31 (8) 1,08 (33,5) 2,36 (60) 0,35 (9) /8-18 x 0,88 (16 x 2,0-22 deep) 5/8-18 x 1,00 (22 x 1,5-32,5 deep) 5,11 (129,8) 0,87 (22) 0,39 (10) 1,40 (43,5) 3,03 (77) 0,43 (11) /4-16 x 0,88 (20 x 2,5-22 deep) 3/4-16 x 1,12 (26 x 1,5-32,5 deep) 6,06 (153,9) 1,06 (27) 0,47 (12) 1,59 (43,5) 3,7 (94) 0,43 (11) Ø Stroke range Ø * Ø T ,26 x 0,14 (6,5 x 3,5) 5 x 0,8 0,28 (7,0) 0,591 ±0,002 (15 ±0,043) ( ) ( ) ,26 x 0,14 (6,5 x 3,5) 5 x 0,8 0,31 (7,8) 0,787 ±0,002 (20 ±0,052) ( ) ( ) ,35 x 0,28 (9,0 x 7,0) 5 x 0,8 0,32 (8,1) 0,512 ±0,002 (13 ±0,043) ( ) ( ) ,35 x 0,28 (9,0 x 7,0) 5 x 0,8 0,33 (8,4) 0,591 ±0,002 (15 ±0,043) ( ) ( ) 32 5, ,35 x 0,28 (9,0 x 7,0) 5 x 0,8 0,34 (8,7) 0,827 ±0,002 (21 ±0,062) 1,94 (49,3) 0,84 (21,4) ,35 x 0,28 (9,0 x 7,0) 1/8* 0,36 (9,2) 1,102 ±0,002 (28 ±0,062) 2,24 (57,0) 0,84 (21,4) ,43 x 0,31 (11,0 x 8,0) 1/4* 0,41 (10,5) 1,378 ±0,002 (35 ±0,062) 2,78 (70,6) 1,04 (26,5) ,55 x 0,41 (14,0 x 10,5) 1/4* 0,45 (11,5) 1,378 ±0,002 (35 ±0,062) 3,29 (83,6) 1,04 (26,5) ,69 x 0,53 (17,5 x 13,5) 3/8* 0,55 (14,0) 1,693 ±0,002 (43 ±0,062) 4,09 (104) 1,18 (30,0) ,69 x 0,53 (17,5 x 13,5) 3/8* 0,71 (18,0) 2,323 ±0,003 (59 ±0,074) 4,8 (121,9) 1,18 (30,0) * ort sizes: D/99000/... = (BS parallel ports), D/99000/... = T (T ports). ote: 5 x 0,8 port will accept #10-32 male thread fittings. on-rotation accuracy Ø ±2 ±1 ±1 ±1 ±0.8 ±0.8 ±0.8 ±0.8 ±0.8 ±0.8 ur policy is one of continued research and development. e therefore reserve the right /US
12 D/99000, D/99000 uided toolplate D/99000/3 (on-magnetic) Ø mm T B F FF T B U S U S FF F F FF J J FF F uided toolplate D/99000/4 (agnetic) 0,28 (7) T B mm Elect. Elect mm Ø mm F FF 0,28 (7) T B mm Elect. 19 Elect. 19 mm FF F U S J F FF U S J FF F Ø Stroke range E1 E2 F FF Ø I J ,94 (24) 0,98 (25) 0,90 (23) 0,63 (16) ( ) 0,82 (20,8) 1,24 (31,5) 6-32 (3 x 0,5) 0,14 (3,5) 0,87 (22) ,10 (28) 1,14 (29 ) 1,07 (27,2) 0,81 (20) 0,44 (11) 0,98 (25) 1,46 (37,1) 6-32 (4 x 0,7) 0,14 (3,5) 1,10 (28) ,38 (35) 1,42 (36) 1,23 (31,2) 1,06 (27) 0,57 (14,5) 1,00 (25,4) 1,85 (47) 8-32 (6 x 1,0) 0,18 (4,5) 1,42 (36) ,54 (40) 1,57 (40) 1,45 (36,9) 1,13 (28,5) 0,66 (16,6) 1,18 (30) 2,02 (51,3) 8-32 (6 x 1,0) 0,20 (5) 1,57 (40) ,71 (43,4) 1,75 (44,5) ( ) 1,19 (30) 0,84 (21,2) 1,44 (36,7) 2,32 (58,9) (5 x 0,8) 0,28 (7) 1,34 (34) ,00 (50,5) 2,05 (52) ( ) 1,38 (35) 0,97 (24,7) 1,78 (45,1) 2,72 (69) 1/4-20 (6 x 1,0) 0,28 (7) 1,57 (40) ,47 (62,7) 2,51 (63,7) ( ) 1,75 (45,5) 1,24 (32,2) 2,25 (57,1) 3,34 (84,9) 5/16-18 (8 x 1,25) 0,31 (8) 1,97 (50) ,98 (75,7) 3,02 (76,7) ( ) 2,00 (50,5) 1,41 (35,7) 2,69 (68,3) 4,01 (101,8) 7/16-14 (10 x 1,5) 0,31 (8) 2,36 (60) ,81 (96,9) 3,85 (97,8) ( ) 2,75 (70) 1,95 (49,5) 3,50 (88,9) 5,11 (129,8) 1/2-13 (12 x 1,75) 0,39 (10) 3,03 (77) ,50 (114,4) 4,54 (115,3) ( ) 3,25 (82,5) 2,30 (58,3) 4,45 (112,9) 6,06 (153,9) 1/2-13 (12 x 1,75) 0,47 (12) 3,70 (94) ,55 (141) 5,59 (142) ( ) 3,74 (95) 2,65 (67,2) 5,30 (134,7) 7,48 (190) * (14 x 2,0) 0,63 (16) 4,49 (114) ,18 (157) 6,22 (158) ( ) 4,00 (101,5) 2,83 (71,8) 6,08 (154,5) 8,27 (210) * (14 x 2,0) 0,63 (16) 5,04 (128) ,91 (175,5) 7,01 (178) ( ) 4,74 (120,5) 3,35 (85,2) 6,85 (174,1) 9,37 (238) * (16 x 2,0) 0,67 (17) 5,67 (144) Ø Stroke range S T U ( ) ( ) 5 x 0,8 0,28 (7) ( ) 0,24 (6,1) ( ) ( ) ( ) ( ) ( ) 0,26 x 14 (6,5 x 3,5 deep) 5 x 0,8 0,31 (7,8) 0,14 (3,3) 0,24 (6,1) ( ) ( ) ( ) ( ) ( ) 0,35 x 0,28 (9,0 x 7,0 deep) 5 x 0,8 0,32 (8,1) 0,17 (4,2) 0,27 (6,9) 0,28 (7) ( ) 0,06 (1,5) ( ) ( ) 0,35 x 0,28 (9,0 x 7,0 deep) 5 x 0,8 0,33 (8,4) 0,17 (4,2) 0,33 (8,3) ( ) ( ) ( ) ( ) ,22 (5,5) 0,35 x 0,28 (9,0 x 7,0 deep) 1/8* 0,34 (8,7) 0,20 (5,2) 0,33 (8,3) ( ) 1,94 (49,3) ( ) 0,84 (21,4) ,22 (5,5) 0,35 x 0,28 (9,0 x 7,0 deep) 1/8* 0,36 (9,2) 0,26 (6,1) 0,33 (8,3) ( ) 2,24 (57) ( ) 0,84 (21,4) ,26 (6,6) 0,43 x 0,31 (11,0 x 8,0 deep) 1/4* 0,41 (10,5) 0,33 (8,2) 0,48 (12,1) 0,49 (13,5) 2,78 (70,6) 0,10 (2,5) 1,04 (26,5) ,35 (9) 0,55 x 0,41 (14,0 x 10,5 deep) 1/4* 0,45 (11,5) 0,45 (11,5) 0,49 (12,5) 0,68 (16,5) 3,29 (83,6) 0,18 (3,3) 1,04 (26,5) ,43 (11) 0,69 x 0,53 (17,5 x 13,5 deep) 3/8* 0,55 (14) 0,52 (12,3) 0,55 (14) 0,77 (18,5) 4,09 (104) 0,18 (3,8) 1,18 (30) ,43 (11) 0,69 x 0,53 (17,5 x 13,5 deep) 3/8* 0,71 (18) 0,52 (12,3) 0,55 (14) 0,77 (18,5) 4,80 (121,9) 0,13 (3,2) 1,18 (30) ,50 (12,7) 0,83 x 0,72 (21,2 x 18,4 deep) 3/8* 0,96 (24,5) * (14,3) 0,83 (21) ( ) 6,02 (153) ( ) 1,53 (39) ,50 (12,7) 0,83 x 0,72 (21,2 x 18,4 deep) 3/8* 0,96 (24,5) * (14,3) 0,83 (21) ( ) 6,61 (168) ( ) 1,53 (39) ,57 (14,5) 0,95 x 0,83 (24,2 x 21,2 deep) 3/8* 1,08 (27,5) * (16,7) 0,83 (21) ( ) 7,40 (188) ( ) 1,53 (39) * ort sizes: D/99000/... = (BS parallel ports), D/99000/... = T (T ports). ote: 5 x 0,8 port will accept #10-32 male thread fittings. ote: n 32 bore, 5 mm stroke, non-magnetic model only, port thread is 5 x 0,8 which will accept #10-32 male thread fittings. lease see next page for B and '' dimensions. /US ur policy is one of continued research and development. e therefore reserve the right
13 D/99000, D/99000 Ø Stroke (mm) , ,28 (7) ( ) 0,35 (9) 0,35 (9) 0,35 (9) ( ) ( ) 16 0,31 (8) ( ) 0,40 (10) 0,40 (10) 0,40 (10) ( ) ( ) 20 0,32 (8) ( ) 0,32 (8) 0,48 (12) 0,48 (12) ( ) ( ) 25 0,33 (8,5) ( ) 0,33 (8,5) 0,50 (12,5) 0,50 (12,5) ( ) ( ) 32 ( ) 0,34 (9) ( ) ( ) ( ) 0,50 (12,5) ( ) 40 ( ) 0,36 (9) ( ) ( ) ( ) 0,50 (12,5) ( ) 50 ( ) 0,41 (10,5) ( ) ( ) ( ) 0,52 (13) ( ) 63 ( ) 0,45 (11,5) ( ) ( ) ( ) 0,73 (18,5) ( ) 80 ( ) 0,55 (14) ( ) ( ) ( ) 0,55 (14) ( ) 100 ( ) 0,71 (18) ( ) ( ) ( ) 0,71 (18) ( ) 125 ( ) 0,96 (24,5) ( ) ( ) ( ) 0,96 (24,5) 0,96 (24,5) 140 ( ) 0,96 (24,5) ( ) ( ) ( ) 0,96 (24,5) 0,96 (24,5) 160 ( ) 1,08 (27,5) ( ) ( ) ( ) 1,08 (27,5) 1,08 (27,5) on-magnetic piston Ø B Stroke (mm) ,30 (33) 1,50 (38) 1,69 (43) 1,89 (48) 2,07 (53) 2,28 (58) ( ) ( ) ( ) 3,30 (84) 4,28 (109) 5,27 (134) ( ) ( ) 16 1,40 (35,5) 1,59 (40,5) 1,79 (45,5) 1,99 (50,5) 2,19 (55,5) 2,38 (60,5) ( ) ( ) ( ) 3,39 (86) 4,38 (111) 5,36 (136) ( ) ( ) 20 1,44 (36,5) 1,63 (41,5) 1,83 (46,5) 2,03 (51,5) 2,22 (56,5) 2,42 (61,5) ( ) ( ) ( ) 3,21 (81,5) 4,59 (116,5) 5,57 (141,5) ( ) ( ) 25 1,48 (37,5) 1,67 (42,5) 1,87 (47,5) 2,07 (52,5) 2,26 (57,5) 2,46 (62,5) ( ) ( ) ( ) 3,25 (82,5) 4,82 (122,5) 5,81 (147,5) ( ) ( ) 32 1,10 (28) 1,30 (33) 1,50 (38) 1,69 (43) 1,89 (48) 2,09 (53) 2,28 (58) 2,48 (63) 2,68 (68) 2,87 (73) 4,25 (108) 5,24 (133) 6,80 (173) 7,79 (198) 40 1,36 (34,5) 1,56 (39,5) 1,75 (44,5) 1,95 (49,5) 2,15 (54,5) 2,34 (59,5) 2,54 (64,5) 2,74 (69,5) 2,93 (74,5) 3,13 (79,5) 4,51 (114,5) 5,49 (139,5) 7,11 (180,5) 8,09 (205,5) 50 1,59 (40,5) 1,79 (45,5) 1,99 (50,5) 2,19 (55,5) 2,38 (60,5) 2,58 (65,5) 2,78 (70,5) 2,97 (75,5) 3,17 (80,5) 4,55 (115,5) 5,53 (140,5) 7,26 (184,5) 8,24 (209,5) 63 1,81 (46) 2,01 (51) 2,20 (56) 2,40 (61) 2,60 (66) 2,80 (71) 2,99 (76) 3,19 (81) 3,39 (86) 4,76 (121) 5,75 (146) 7,46 (189,5) 8,49 (214,5) 80 2,11 (53,5) 2,30 (58,5) 2,50 (63,5) 2,70 (68,5) 2,89 (73,5) 3,09 (78,5) 3,29 (83,5) 3,48 (88,5) 3,68 (93,5) 5,06 (128,5) 6,04 (153,5) 7,66 (194,5) 8,64 (219,5) 100 2,48 (63) 2,68 (68) 2,87 (73) 3,07 (78) 3,27 (83) 3,46 (88) 3,66 (93) 3,86 (98) 4,06 (103) 5,43 (138) 6,42 (163) 7,94 (202) 8,93 (227) 125 3,66 (93) 4,06 (103) 4,45 (113) 4,84 (123) 5,24 (133) 6,22 (158) 7,20 (183) 8,19 (208) 9,17 (233) 140 3,66 (93) 4,06 (103) 4,45 (113) 4,84 (123) 5,24 (133) 6,22 (158) 7,20 (183) 8,19 (208) 9,17 (233) 160 3,98 (101) 4,37 (111) 4,76 (121) 5,16 (131) 5,55 (141) 6,54 (166) 7,52 (191) 8,50 (216) 9,49 (241) agnetic piston Ø B Stroke (mm) ,30 (33) 1,50 (38) 1,69 (43) 1,89 (48) 2,07 (53) 2,28 (58) ( ) ( ) ( ) 3,30 (84) 4,28 (109) 5,27 (134) ( ) ( ) 16 1,40 (35,5) 1,59 (40,5) 1,79 (45,5) 1,99 (50,5) 2,19 (55,5) 2,38 (60,5) ( ) ( ) ( ) 3,39 (86) 4,38 (111) 5,36 (136) ( ) ( ) 20 1,44 (36,5) 1,63 (41,5) 1,83 (46,5) 2,03 (51,5) 2,22 (56,5) 2,42 (61,5) ( ) ( ) ( ) 3,21 (81,5) 4,59 (116,5) 5,57 (141,5) ( ) ( ) 25 1,48 (37,5) 1,67 (42,5) 1,87 (47,5) 2,07 (52,5) 2,26 (57,5) 2,46 (62,5) ( ) ( ) ( ) 3,25 (82,5) 4,82 (122,5) 5,81 (147,5) ( ) ( ) 32 1,50 (38) 1,69 (43) 1,89 (48) 2,09 (53) 2,28 (58) 2,48 (63) 2,68 (68) 2,87 (73) 3,07 (78) 3,27 (83) 4,25 (108) 5,24 (133) 6,80 (173) 7,79 (198) 40 1,75 (44,5) 1,95 (49,5) 2,15 (54,5) 2,34 (59,5) 2,54 (64,5) 2,74 (69,5) 2,93 (74,5) 3,13 (79,5) 3,33 (84,5) 3,52 (89,5) 4,51 (114,5) 5,49 (139,5) 7,11 (180,5) 8,09 (205,5) 50 ( ) 1,99 (50,5) 2,19 (55,5) 2,38 (60,5) 2,58 (65,5) 2,78 (70,5) 2,97 (75,5) 3,17 (80,5) 3,37 (85,5) 3,56 (90,5) 4,55 (115,5) 5,53 (140,5) 7,26 (184,5) 8,24 (209,5) 63 ( ) 2,20 (56) 2,40 (61) 2,60 (66) 2,80 (71) 2,99 (76) 3,19 (81) 3,39 (86) 3,58 (91) 3,78 (96) 4,76 (121) 5,75 (146) 7,46 (189,5) 8,49 (214,5) 80 ( ) 2,50 (63,5) 2,70 (68,5) 2,89 (73,5) 3,09 (78,5) 3,29 (83,5) 3,48 (88,5) 3,68 (93,5) 3,88 (98,5) 4,07 (103,5) 5,06 (128,5) 6,04 (153,5) 7,66 (194,5) 8,64 (219,5) 100 ( ) 2,87 (73) 3,07 (78) 3,27 (83) 3,46 (88) 3,66 (93) 3,86 (98) 4,06 (103) 4,25 (108) 4,45 (113) 5,43 (138) 6,42 (163) 7,94 (201,5) 8,93 (226,5) 125 ( ) 3,66 (93) ( ) 4,06 (103) ( ) 4,45 (113) ( ) 4,84 (123) (5,24 (133) 6,22 (158) 7,20 (183) 8,19 (208) 9,17 (233) 140 ( ) 3,66 (93) ( ) 4,06 (103) ( ) 4,45 (113) ( ) 4,84 (123) 5,24 (133) 6,22 (158) 7,20 (183) 8,19 (208) 9,17 (233) 160 ( ) 3,98 (101) ( ) 4,37 (111) ( ) 4,76 (121) ( ) 5,16 (131) 5,55 (141) 6,54 (166) 7,52 (191) 8,50 (216) 9,49 (241) ur policy is one of continued research and development. e therefore reserve the right /US
M/60210/M Miniature rotary actuators
M/6020/M Miniature rotary actuators Double acting - Magnetic piston - Ø 2 and 20 mm Smooth operation with zero backlash Lightweight ompact envelope dimensions Integral magnets for positional feedback TEHNIL
PRA/282000/M. Smart cylinders ISO 6431, VDMA and NFE Magnetic piston Double acting Ø 32 to 100 mm
Smart cylinders ISO, VDMA and NFE 9-00- Magnetic piston Double acting Ø to 00 mm Conforms to ISO, VDMA, NFE 9-00- Complete functional unit with integrated AS-Interface bus system or multipole connector
ø6, ø10, ø15, ø20, ø25, ø32, ø40, ø50, ø63 How to Order Switch rail Nil Standard stroke Refer to page 12 for standard stroke.
Magnetically Coupled Rodless Cylinder: Direct Mount ype Series ø, ø, ø, ø, ø, ø, ø, ø0, ø Direct mount type mm mm mm mm mm mm mm 0 0 mm mm 00 MB Piping type Both sides piping type Centralized piping type
Series MHY2/MHW Angular Gripper. Cam actuation style is now standardized! MHZ2 MHZJ2 MHQ MHL2 MHR MHK MHS MHC2 MHT2 MHY2 MHW2 MRHQ 2.
18 Angular Gripper Cam Style Rack & Pinion Style Series / Cam actuation style is now standardized! 2.8-1 18 Angular Gripper 18 Angular Gripper Series / Cam Style Rack & Pinion Style Series / Series MHY/Cam
Specifications. Stroke length. Small direct mounting cylinder MDC2 Series. Port size: M3 (For 4, 6, 8 mm bore) M5 (For 10 mm bore) Descriptions
mall direct mounting cylinder 2 eries ort size: (or,, mm bore) (or mm bore) I symbol ingle acting spring return type ingle acting spring extend type ouble acting VI. pecifications escriptions ore size
Bore size: 4, 6, 8, 10. Double acting. Double acting Compressed air Withstanding pressure Ambient temperature Port size
*2 2 2 G 2 V2 /V2 V 2 * * U U G U2 2 U 2 G pecifications troke length ore size ylinder switch specifications escriptions pplications utput method ower voltage oad voltage oad current urrent consumption
MINI-CYLINDER ISO 6432 SERIES TP Ø mm AND ACCESSORIES
-YR O R T OR inicylinders manufactured according to the O regulation having high resistance technopolymer heads and anodized aluminium liner. vailable in various versions with a wide range of accessories:
180 Angular Gripper. Series MHY2/MHW2. Cam actuation style is now standardised! 5-241
18 Angular Gripper Cam tyle Rack & Pinion tyle eries MHY2/MHW2 Cam actuation style is now standardised! -21 18 Angular Gripper Cam tyle Rack & Pinion tyle eries MHY2/MHW2 eries MHY/Cam tyle Light and compact
Rodless cylinders Series 1600
Rodless cylinders Series 00 Basic version 0.Ø.stroke.0.M Max. stroke mt.) AL AI RA RB AF TC AM L LA+stroke AH TD AE TA RV Possibility of a single feed cylinder head AI AP AB AC AD TD TE TB AG RT Left head
Low Profile Slide Table
Low Profile Slide Table Series ø, ø, ø1, ø Low-profile and compact type, air slide table with the construction of guide and cylinder aligned in parallel. Neat appearance Protecting stopper section with
Features: Specification. Model. Acting type. Tube I.D.(mm) Port size. No. of port. Medium Operating pressure range
& F * eries to 3mm ore Features: qual forces on both ends of the piston. Force connection direct, torque safe. agnetic piston standard. % spacesavings. nd caps with 3 air connections and adjustable cushioning.
Features and Benefits
...................................................................................- Features and Benefits.............................................................................. How to Order....................................................................................
COMPACT CYLINDERS SERIES CMPC Ø
T YIE EIE 0 ompact cylinder series available in numerous versions to meet a full range of requirements: With or without magnet ingle-acting extended rod, retracted or through-rod ual-acting non-rotating
How to Order M9BW. Action D Double acting. Load voltage M9NWV M9NW 5 V, 12 V 5 V, 24 V 12 V M9BWV M9BW 12 V 12 V M9NAV M9NA 5 V, 12 V 12 V.
arallel Style Air ripper/-inger Type Series MHS ø1, ø, ø, ø, ø, ø, ø, ø, ø1, ø How to rder Bore size ø1 to ø Number of fingers fingers MHS Bore size 1 1 mm mm mm D MBW Action D Double acting Auto switch
PN LINE. PN Line. PX Line. PA Line. PU Line PX LINE. PV Line PA LINE & TUBINGS PU LINE PV LINE. Brass Push-in fittings
I NDEX PV LINE PX LINE PU LINE PA LINE & TUBINGS PN LINE Brass Push-in fittings Stainless Steel Push-in fittings Brass Standard fittings and Flexible Hoses Couplings and Multiple Connectors Function fittings
Free Mount Cylinder Double Acting, Double Rod. ø6, ø10, ø16, ø20, ø25, ø32. How to Order. Action. D Double acting. Standard stroke (mm)
ouble Acting, ouble Rod eries CUW ø, ø, ø1, ø, ø2, ø How to Order CUW With auto switch CUW MBW Built-in magnet ouble rod 1 2 mm mm 1 mm mm 2 mm mm Action ouble acting Number of auto switches Nil 2 pcs.
SHORT STROKE CYLINDERS
O OK YI IX: Ordering ata age enefits & pecifications age eries & age eries & age eries & age eries & F age agnetic ensor & Options age OG F01- opyright 1, by, Inc. rinted in the... O O IFY: eries, ore,
5/2-5/3 SPOOL VALVES MULTIFUNCTION air operated or solenoid air operated with subbase ISO 5599/1 sizes 1, 2 and 3
/ - / SPOOL VALVES MULTIFUNCTION air operated or solenoid air operated with subbase ISO 99/ sizes, and Series Fluids air or inert gas, filtered, lubricated or not Operating pressure Pilot pressure Ambient
Cartridge Valves Technical Information. Quick reference
Quick reference Contents CPF0... 8. CP600-5... 8. CP60-5... 8. 066 handle kit... 8.5 MP06... 8.6 MP... 8.6 X05-FD0 Traction manifold... 8.9 X05-FD6 Traction manifold... 8.0 X05-FD0 Traction manifold...
Nickel-Plated Brass Push-In Fittings - NPTF/INCH
/INCH Tube Connections: External /8, 5/32, /4, 5/6, 3/8, /2 Thread Connections 0-32 UNF, /8, /4, 3/8, /2 Reusable thread seal, PTFE seal ring (Teflon ) - Pro-Fit Standard - Camozzi s all metal fittings
A wide selection of pipe and orifice sizes is offered. Valves are available with threaded ports in brass and stainless steel.
Solenoid Valve Waterhammer-Free, 0- PSI /-Way; NPT - NPT; 0- PSI Advantages/Benefits Type 63 Waterhammer-free Low noise Zero differential pressure ompact design with high flow rates Low maintenance oil
Bettis RGS F-Series. Quarter-Turn Spring-Return (SR) and Double-Acting (DA) Pneumatic Actuators. Product Data Sheet RGS Rev.
Bettis RGS F-Series Quarter-Turn Spring-Return (SR) and Double-Acting (DA) Pneumatic Actuators Output Torques to 500,000 in-lb (56,492 N m) Ductile Iron or Stainless-Steel Construction Temperatures from
Linear actuator Econom 2. Our intelligent model: Econom 2. Econom 2
Linear actuator Econom 2 Our intelligent model: Econom 2 Econom 2 Linear actuators Econom 2 Description Applications Facts The users of the Econom 2 come from many different industries: From architects
Absolute encoders multiturn
elektronischer electronic multiturn, Multiturn, magnetic magnetisch Sendix M66 / M68 (shaft / hollow shaft) The Sendix M6 with Energy Harvesting Technology is an electronic multiturn encoder in miniature
35P-3 HH 3 HH 2 35P-3. f32 f40. f50 f63. f80 f100. Switch Set. Type Standard type Switch Set
f f f f f f Kind of piston seal U seal Slipper Seal U seal Slipper Seal Nominal pressure. MPa Maximum allowable pressure. MPa Proof test pressure MPa Minimum operating pressure. MPa or less Working speed
HDF series - PARALLEL GRIPPER
Operation specification and Ordering expression Internal structure DS Angular DM 0 Angular Specification ore size Type of operation Fluid Pressure range Range of service temperature kgf/cm (kpa) Max. operation
AIR PREPARATION. ELECTRONICALLY CONTROLLED PRESSURE REGULATING VALVE (PROPORTIONAL PRESSURE REGULATING VALVE) SERIES control
AIR PREPARATION ELECTRONICALLY CONTROLLED PRESSRE REGLATING ALE (PROPORTIONAL PRESSRE REGLATING ALE) SERIES control Description Abb. Port size Recommended Type Data Sheet No. flow (l/min)* airfit tecno
barmesapumps.com SELF-PRIMING CENTRIFUGAL TRASH PUMP SPECIFICATIONS Series: SH8-U Suction: 8" Discharge: 8" Spherical solids handling: 3"
SELF-PRIMING CENTRIFUGAL TRASH PUMP Series: SH-U Suction: " Discharge: " Spherical solids handling: 3" SIZE BEARING - PUMP END " x " NPT, lbs., female flange. Open single ball, radial load. LIQUID TEMPERATURE
ED 701 General Industry Pressure Transmitter
ED 701 General Industry Pressure Transmitter Standard industrial process connections Complete range of electrical connections 4... 20 ma and Voltage outputs Accuracy: 0.1%, 0.2% and 0.4% FS Quick response
Precision Ball Screw/Spline
58-2E Models BNS-A, BNS, NS-A and NS Seal Outer ring Shim plate Seal Spline nut Seal Collar Shim plate Seal End cap Ball Outer ring Ball screw nut Outer ring Ball Retainer Retainer Outer ring Point of
Chapter 6. Hydraulic cylinders/rams (linear motors), and Lines/fittings. - Transforms the flow of a pressurized fluid into a push or pull of a rod.
Chapter 6. Hydraulic cylinders/rams (linear motors), and Lines/fittings - Transforms the flow of a pressurized fluid into a push or pull of a rod. 6. Single cting Rams Gravity, spring, etc. can force piston
Target Insertion Flowmeter
Principle of Operation Flow is measured in terms of dynamic force acting on a target (solid disk) in the flow stream. Hermetically sealed, bonded strain gages in a bridge circuit configuration mounted
Atlas Copco Air motors. A full range of compact, high performance air motors
Atlas Copco Air motors A full range of compact, high performance air motors ATLAS COPCO AIR MOTORS AIR MOTOR FEATURES AND CHARACTERISTICS Air motors are compact and lightweight. An air motor weighs only
SKF actuators available for quick delivery. Selection guide
SKF actuators available for quick delivery Selection guide A wide range of SKF actuators available for quick delivery Industrial actuator 24 Volt DC Load range 1 000 to 4 000 N Speed range 5 to 52 mm/s
High Power Contacts - Up to 850A
8 Series igh Power Contacts igh Power Contacts - Up to 850 esigned to meet the harshest military requirements where high power and shielding are needed. 3 aluminum shell sizes available Size 19 (450 max);
hard anodized aluminum extrusion die cast aluminium acetalic resin nickel plated steel die cast aluminium nitrile rubber stainless steel 3 Version
YR Pneumatic actuators for process automation Pneumatic connections configuration: NMUR interface V/VE Top pinion: V/VE Holes for sensor box connection: V/VE ottom holes for connecting valves: SO Single
EVOTRON WET ROTOR ELECTRONIC CIRCULATORS TECHNICAL DATA APPLICATIONS ADVANTAGES
TECNICAL DATA EVOTRON Operating range: from, -, m3/h with head of up to metres. Pumped liquid temperature range: from - C to + C. Working pressure: bar ( kpa). Protection class: IP X. Insulation class:
Mil-Stak PT/2016 PARTS MANUAL
Mil-Stak PT/0 PARTS MANUAL Mil-Stak Inc. 0 Hwy 0 West Fruitland Idaho Phone 0--0 ext - Main Assemblies ITEM PAGE P00 P00 P0 P0 PT 0 P00 Wheel Assembly Valve Block Frame Assembly PT Stackbed Assembly Receiving
SUBMINIATURE MICROSWITCHES - STANDARD
0/08 SUBMINIATURE MICROSWITCHES - STANDARD VD - 87 Flexible leaf snap-action mechanism with wiping contacts Ratings from 0.0 A Vc to (6) A 0 Va and / hp -0 Va ENEC and curus approved up to +0 C Housing
STAINLESS STEEL MINI-CYLINDER SERIES ISO 6432 Ø mm
TN T N-YN O mm O stainless steel micro-cylinders are available in various versions with a wide range of accessories with or without magnet execution double-acting - single or through-rod gaskets: Polyurethane
Front flange FLV. Max. [knm/stroke]
![Front flange FLV. Max. [knm/stroke]](/thumbs/92/109382839.jpg "Front flange FLV. Max. [knm/stroke]")
SDN 45 Safety shock absorbers SDN are a low cost alternative to industrial shock absorbers appropriate to customers requirements. Typical applications: cranes, storage and retrieval unit for highbay warehouse,
HRN/HRN-C Series Hydraulic Vane Rotary Actuators
HRN/ Hydraulic Vane Rotary Actuators Vane Actuators Tork-Mor HRN Contents Features... 2 Ordering Information... Engineering Data / Specifications... Dimensions... Features... 1 Ordering Information...12
100Z-1 100Z-1 51 HA 50. Cushion ring Cushion ring. Type. Standard type. Switch Set
0Z-1 0Z-1 51 Type Nominal pressure Maximum allowable pressure Proof test pressure Minimum operating pressure Working speed range Working temperature range (ambient/fluid temperature) Structure of cushioning
CTV series CHARACTERISTICS LINEAR UNITS
CTV series CHARACTERISTICS The CTV series describes s with a precision ball screw drive and two parallel, integrated, Zerobacklash rail guides. Compact dimensions allow high performance features such as,
High Power Cylinder. RHC Series. ø20, ø25, ø32, ø40, ø50, ø63, ø80, ø100. REA REB REC Smooth MQ RHC RZQ D- -X. Low Speed
High Power ylinder RH Series ø, ø, ø3, ø4, ø, ø, ø8, ø RE RE RE RH 34 High power cylinder: cushioning for high speed operation (3 low/medium speed operation with heavy loads The capacity to absorb to times
STANDARDISED MOUNTINGS
STANDARDISED MOUNTINGS for series 449 cylinders conforming to ISO 21287 standard Series 434 MOUNTINGS CONFORMING TO ISO 21287 - ISO 15552 - AFNOR NF ISO 15552 - DIN ISO 15552 STANDARDS applications Low
Indicate Positive, Negative or Differential, Accurate within 1%
SERIES 2000 MAGNEHELIC DIFFERENTIAL GAGES Indicate Positive, Negative or Differential, Accurate within 1% RUBBER RELIEF PLUG WILL UNSEAT ITSELF WHEN GAGE IS OVERPRESSURIZED.025 [.64] SPACE CREATED BY 3
M O D U L E - 3A Model A10V0 Piston Pump Manual A10V0 PUMP. Features
T E C H N I C A L I N F O R M A T I O N M A N U A L F O R T H E A 1 0 V 0 V A R I A B L E D I S P L A C E M E N T P U M P S A10V0 PUMP Features High Efficiency through load sensing (= fuel savings) Maximum
Universal type Port size AS13 1F-M3. M3 x 0.5 M5 x 0.8 AS23 1F-01 AS23 1F-02 AS33 1F-02 AS33 1F-03 AS43 1F-04 R 1/8 R 1/4 R 1/4 R 3/8 R 1/2
Minimizes installation time and cost Reduces the mounting height and enables compact machinery design. Effective area is larger than the former model. Tube swivels 0 Universal type permits 0 piping swivel.
MRH. Return Filters RETURN FILTER
MRH Return ilters RETUR ILTER Return ilters MRH MRH MPa (0 bar) Port sizes: / / low rates:.00 l/min TECHICAL ATA Max. working pressure: MPa (0 bar) Max. test pressure: MPa ( bar) ursting pressure: 6 MPa
Identification The of -Lube Linear Roller Way Super MX is identified by the identification, which consists of model code, size, part code, material symbol preload symbol, classification symbol, interchangeable
Check-Q-meter. Table of contents. Features. Functions. RE 27551/ /10 Replaces: Type FD
Check-Q-meter RE /0.0 /0 Replaces: 09.9 Type FD Nominal size... Series ax. Operating pressure 0 bar ax. Flow 0 l/min K9/ Table of contents Contents Page Features Functions Ordering details Symbols Functional
C-Lube Linear Way ML ML MLF
Maintenance ree & U.S. PTTD C-Lube Linear ay Variation of C-Lube Linear ay Shape Length of slide unit Model code C-Lube Linear ay is a linear motion rolling guide, incorporating the C-Lube as a components
RODLESS PNEUMATIC CYLINDER
ymbol ROLE Z,Z,ZK series Z odel ummary Z tandard cylinder With identical fitting length as existing cylinders ithout piston. 0-stroke compatible. I O - 0 0 QULIY ERIIE tandard Z Z Guiding cylinder With
Flow Divider Type MH2FA, Series 4X (Differential lock) Size 12 to 32 up to 420 bar up to 300 L/min
RE 8/0.98 8/0.9 Flow Divider Type MHF, eries X (Differential lock) ize to up to 0 bar up to 00 /min RE 8/0.98 Replaces: 0.9 Characteristics: Double-acting (dividing and summating) flow divider Fixed division
Direct-operated 2/2-way compact solenoid valves Type EV210A
Data sheet Direct-operated 2/2-way compact solenoid valves Type EV210A EV210A covers a wide range of small, directoperated 2/2-way solenoid valves for use in industrial machinery. The compact design together
10A-2 AB 299 AB A-2. Double rod type Adjustable stroke (retraction side) Double acting type. Series variations. Series. Cylinder bore
-2-2 9 Series variations ouble acting type ouble rod type djustable stroke (retraction side) Standard type Switch Set VL Set SV Set Standard type VL Set Standard type VL Set Series -2-2R -2V2-2K2-2 -2V2-22
S E G N A L F E IP P
9 8 PIPE FLANGES an excellence in engineering www.jbj.co.uk/ portflanges.html SAE standard, and 6, series flanges for screw or weld connection. Available for straight connection, fixed or swivel elbow
DS 300. Electronic Pressure Switch. with IO-Link interface. Stainless Steel Sensor. accuracy according to IEC 60770: 0.35 % FSO.
DS 00 Electronic Pressure Switch with IO-Link interface Stainless Steel Sensor accuracy according to IEC 60770: 0.5 % FSO Nominal pressure from 0... 00 mbar up to 0... 600 bar Digital output signal IO-Link
Pneumatic Valves. Valve Actuators
Air Preparation Units Symbol Description Pneumatic Valves Symbol Description Symbol Cylinders Description Filter / Separator with manual drain 3-Position, 4-Way, APB ports closed, center pos. Standard
Fluid Cooling Industrial PF Series
Fluid Cooling Industrial PF Series 0916 STAINLESS STEEL PLATES CARBON STEEL FRAME Performance Notes Carry bar Gasketed plate style heat exchanger Tie rods Oil to water applications High performance Pressure
Solenoid valves 2/2-way direct-operated type EV210A
MAKING MODERN LIVING POSSIBLE Data sheet Solenoid valves 2/2-way direct-operated type EV210A EV210A covers a wide range of small, direct-operated 2/2-way solenoid valves for use in industrial machinery.
Ball screw. Linear. Coupling cover. 1Positioning table of a structure with enhanced sealing property. 3 High corrosion resistance
Cleanroom Precision Positioning Table TC Ball screw TC EB Slide table inear Way Side cover Stainless sheet Motor bracket inear Coupling cover Pipe threads for suction connector Points ight weight, low
Transmitters for basic requirements SITRANS P MPS (submersible sensor) Transmitter for hydrostatic level
Overview Function s are for measuring the liquid levels in wells, tanks, channels and dams. Sensor Diaphragm p U const. U +2 (brown) I EM I - (blue) 0, U B s are submersible sensors for hydrostatic level
MICRO-AIR SERIES. miniature direct solenoid actuated valves
R-R SERES miniature direct solenoid actuated valves RR i c r o i r d i r e c t s o l e n o i d a c t u a t e d m i n i a t u r e v a l v e s T E D T................................................... 3
HARTING D-Sub Selection Guide
HARTING D-Sub Selection Guide People Power Partnership D-Sub Selection Guide D-Sub Device Connectivity HARTING Connectivity & Networks generates solutions throughout the triad of Installation Technology,
ISO mm ISO mm. Nl/min. Nl/min. Nl/min. Nl/min. ISO /2 Distributors. ISO Interface. OVERSIZED interface (UNIVER original)
ISO 154071/ Distributors E Integrated electrical connection (ISO 15407/) B M1 connector (Automotive) A Single electrical connection (ISO 15407/1) A Pneumatic connection (ISO 15407/1) ISO 0 ISO Interface
Cipriani Harrison Valves Corp.
Butterfly Valve pplication Stainless steel hygienic butterfly valves are used in process piping systems for isolation and control. Butterfly valves operate either manually or automatically. Working Principle
Product Description. Further highlights. Outstanding features. 4 Bosch Rexroth Corporation Miniature Linear Modules R310A 2418 (2009.
4 Bosch Rexroth orporation Miniature Linear Modules R310A 2418 (2009.05) Product Description Outstanding features Rexroth Miniature Linear Modules are precise, ready-to-install linear motion systems that
Valve Products ADEX Series Valves
atalog 000-2US X alves X is a miniature low power consumption solenoid valves, ideal for powering small to mid-sized pneumatic actuators used in automation and process applications. X's versatility is
Pneumatic Universal. Actuator MOTORIZED VALVES USE TECHNICAL FEATURES OF THE ACTUATOR. Data sheet
Data sheet. - 8 USE The motorized valve is specifically used for the interception and regulation of fluids in: systems using alternative energy industrial systems in general using hot and cold fluids automation
Vane Type Rotary Actuators Series Variations
Vane Type Rotary Actuators Series Variations Vane Type Exterior CRB Series 0,, 0,, CRBU Series 0,, 0,, CRB Series, 6, 80, Has a compact body with exterior dimensions that do not change regardless of the
CKA Series. 3-way jaw thin chuck double acting/single acting. Operational stroke length: 5, 6, 7, 9, 20, 25, 30, 38mm.
G G B A S F J L L H LB N/ S/F Specifications Descriptions Size Cylinder bore size Operating method Working fluid Max. working pressure Min. working pressure Ambient temperature Port size Operational stroke
PNEUMATIC AND HYDRAULIC MULTI-MOTION ACTUATOR
PNUT N YU UT-TN TUT ajor enefits Provides independent rotary and linear motion from one output shaft. deal for part transfer, positioning, and orientation. ealed shaft ball bearings on rotary section provide
RFM. 300 kpa (3 bar) Return Filters RFM. Ports: 3/8 2 1/2 Flow rates: l/min
Return Filters RFM RFM kpa (3 bar) Ports: 3/ 2 1/2 Flow rates: 0 l/min ECHNICAL DAA Max. working pressure: kpa (3 bar) Max. test pressure: 00 kpa ( bar) Bursting pressure: 1 MPa (10 bar) Fatigue test:
Relative pressure transmitter type 520
Relative pressure transmitter type 520 Pressure range The compact type 520 pressure transmitter is based upon the Huba Control developed thick film technology where the pressure measuring cell is fully
all stainless steel transducer multimedia compatibility
all stainless steel transducer multimedia compatibility High-Performance Silicon technology LARGE INVENTORY Fast Shipment! 0-0.07 to 0-690 bar 100 mv, 0 to 5 V, and 4 to 20 ma Outputs U 1, 2 & 5 psi Low
4/4-way servo solenoid directional control valves, directly operated, with electrical position feedback and on-board electronics (OBE)
4/4-way servo solenoid directional control valves, directly operated, with electrical position feedback and on-board electronics (OBE) RE 9035/. Replaces: 05. 1/1 Type 4WRPEH 6 Size 6 Unit series X Maximum
Metal oil filler and air breather filler caps. Bayonet connection. Reservoir holes. TA46 B (Materials)
Metal oil filler and air Series T 46 4 5 6 4 ayonet connection Ø 46 7 8 46 Reservoir holes T46 (Materials) M5 - Cover: Chrome Plated Steel - Filter element: Impregnated paper Polyurethane 64-6 - Flange:
Vacuum capacitors overview Capacitor selection guides
JENNINGS TECHNOLOGY Vacuum capacitors overview Capacitor selection guides Capacitors by type Capacitor type Vacuum variable Capacity max. (pf) Test voltage / Hz Model no. series Page number 7.,, 1 CVDD-
Shock Absorber. Absorbing impact and noise. Shock absorber. Series D- -X. Shock absorber: RB series Coolant resistant type: RBL series
hock Absorber RB eries Absorbing impact and noise Dampening to meet the high speed requirements of the modern world. hock absorber: RB series oolant resistant type: RBL series hock absorber Automatic adjustment
VOLUMEC. Valve Position Indicator 5
VOLUMEC Valve Position Indicator 5 2 KRACHT CORP. 8600 S Wilkinson Way Unit A Perrysburg, OH 43551 USA P +1 419 874 1000 F +1 419 874 1006 flowmeters@krachtcorp.com www.krachtcorp.com VOLUMEC Valve Position
Rotary modules.
Rotary modules www.comoso.com www.comoso.com Rotary modules ROTARY MODULES Series Size Page Rotary modules RM swivel unit 156 RM 08 160 RM 10 162 RM 12 164 RM 15 168 RM 21 172 RM rotor 176 RM 50 180 RM
Body (Black) O-ring. Effective when piping in a confined space. The body and the threaded portion can rotate (For positioning to some extent).
Antistatic One-touch Fittings ubing: etric Size/Connection hread:, Rc, G, NP, NPF Series RoS One-touch fitting with antistatic prevention. One-touch IN/OU connection. Possible to use from vacuum ( 0 kpa.
Compact and low-cost monitoring of conductive liquids. Magnetic-inductive flow metering from ifm.
Flow sensors www.ifm.com/mid Compact and low-cost monitoring of conductive liquids. Magnetic-inductive flow metering from ifm. For industrial applications Volumetric flow sensor efector mid. High-precision
Formulae and examples of calculation
Shock absorber Formulae and examples of calculation A shock absorber decelerates linearly. Roughly 90% of shock absorber applications can be modelled if the following 4 factors are known: 1. Mass to slow
Size A DIN EN
Size A DIN EN 70-0 Actuators 0 series DIN EN 70-0 +, + ow and high housing Degree of protection IP6 Wired versions Moulded versions Degree of protection IP67 Contacts Thread Cable outlet Ordering-No. Female
Pressure Measurement. Transmitters for basic requirements SITRANS P MPS (submersible sensor) Transmitter for hydrostatic level 2/27
Overview Siemens AG 011 Function s are for measuring the liquid levels in wells, tanks, channels and dams. Diaphragm p Sensor U const. U + (brown) I EM I -1 (blue) 0, U B s are submersible sensors for
Table of Contents SC Series Features and Benefits
Table of Contents SC Series...................................................... -6 Features and Benefits.................................................................................. How To Order........................................................................................
Attachments. T Type Interface: (T) M5 X 0.8, 1/ 8, 1/ 4, 3/ 8, 1/ 2 Makes it easy to diverge air out with T type interface
ttachments Piping dapter M X 0.8, / 8, /, / 8, /, /, asy maintenance. Makes it possible to attach and detach equipment without removing piping. -0 Piping adapter To order piping adapter with bracket, the
Medium bore size cylinder Double acting/single rod/with switch. SCA2 Series. Bore size: 40, 50, 63, 80, 100 mm. 80 dia. 63 dia. +2.
Meium ore size cyliner oule acting/single ro/with switch eries Bore size:, 5,, 8, 1 mm JI symol C VIBE. pecifications escriptions /2 Bore size mm ia. ia. ctuation Working flui Max. working pressure Ma
Universal bumper to frame hitch for 27,000 33,000 lbs. GVWR trucks. Optional: carbide cutting edge, mushroom shoes, snow deflectors
DATA SPECIFICATION SHEET MEYER RP SERIES (ROAD PRO) Specifications RP-10 10 feet long by 36 inches tall, weight approximately 1600 lbs. Universal bumper to frame hitch for 27,000 33,000 lbs. GVWR trucks
Differential Pressure Switch
Features Using piezoresistive pressure sensor, which is compensated and aged well; high accuracy, quick response; Amplifier circuit driving switch relay; relay value could be set freely between zero and
Pressure Transmitter ED 701
Pressure Transmitter ED 701 Hygienic and industrial process connections Zero setting function Accuracy < 0.1% FS Quick response time < 25 ms High long-term stability Excellent repeatability Active compensation
Clean One-touch Fittings
Clean One-touch Fittins //G Series G Series K2 2 K /D / 0 D KD K K 2 G2 S One-touch fittins and tubin for blowin systems and drive air One-touch fittins (for blowin) Collet Seal ED (Fluorine coatin) Special
IBV Series Z Alloy Steel Inverted Bucket Vertical Steam Trap
Local regulations may restrict the use of this product to below the conditions quoted. In the interests of development and improvement of the product, we reserve the right to change the specification without
Identification system for short product names. Changes/amendments at a glance. 2 Bosch Rexroth AG OBB omega modules R ( )
Omega Modules OBB 2 OBB omega modules R9990079 (206-05) Identification system for short product names Short product name Example: O B B - 085 - N N - System = Omega module Guideway = Ball Rail System Drive
SRL3. Rodless cylinder. Rodless type. ø12 ø16 ø20 ø25 ø32 ø40 ø50 ø63 ø80 ø100
Overview High load and long service life. that can operate at high speeds. Ample variation with sizes available from ø to ø00. eatures lat cylinder lat piston with a structure that could take on the load.
Lever-type Dial Test Indicators
Lever-type Dial Test Indicators www.tesatechnology.com G-1 Lever-type Dial Test Indicators TESA IP65 Electronic Dial Test Indicators Provides the advantages of a mechanical test indicator with a digital
Lever-type Dial Test Indicators
Lever-type Dial Test Indicators G-1 Lever-type Dial Test Indicators TESA IP65 Electronic Dial Test Indicators Provides the advantages of a mechanical test indicator with a digital reading. Inductive patented