SRL3. Rodless cylinder. Rodless type. ø12 ø16 ø20 ø25 ø32 ø40 ø50 ø63 ø80 ø100

Transcription

1 Overview High load and long service life. that can operate at high speeds. Ample variation with sizes available from ø to ø00. eatures lat cylinder lat piston with a structure that could take on the load. High load resistance and nonrotating mechanism. Seal belt Sealing performance increased much longer to make the sealing contact linear. Magnet provided as standard Switches can be directly mounted on standard types. High speed packing seal provided High speed resistant piston packing seal is used. ommon port ommon port (one end porting), or standard port (both ends porting) can be selected to accommodate cylinder mounting position. This contributes to downsizing of devices. ø ø ø0 ø ø ø0 ø0 ø ø00 O N T E N T S Series variation Variation and option selection table Safety precautions 8 ouble acting() 00 ouble acting/resin guide(-g) 08 ouble acting/position locking(-q) 0 ouble acting/resin guide/position locking (-GQ) 0 Series option dimensions 08 onfigurations table 0 ouble acting full cowling type(-j) 0 onfigurations table 0 Selection guide 0 SP* MK MA SA KV A/OV M SM JSK/M STR UA MRL MRG SM- A UA R

2 Series variation Series Series Series variation SP* MK MA SA KV A/OV M SM JSK/M STR UA MRL MRG SM- A UA R Variation ouble acting standard type ouble acting resin guide type ouble acting with position locking function ouble acting with position locking function Model no. JIS symbol -G -Q -GQ (mm) ø, ø, ø0 ø ø ø0, ø0, ø, ø00 ø, ø, ø0 ø ø ø0, ø0, ø, ø00 ø, ø, ø0 ø ø ø0, ø0, ø, ø00 ø, ø, ø0 ø ø Standard stroke length (mm) Max. stroke length Min. stroke length (mm) (mm) ustom stroke length (mm) : Standard : Option : ustom order Not available Mounting style ushion Option Page Switch Height adjustment plate Table mounting thread size up mount bracke Intermediate support bracket L Intermediate support bracket 00 Thin floating joint loating joint Adjustable full stroke bracket to be installed later Adjustable full-stroke L side with shock absorber Adjustable full-stroke R side with shock absorber Adjustable full-stroke both sides with shock absorber No cushion L side cushioned R side cushioned oth sides cushioned Axial foot type Axial foot type Axial foot type asic type 00 L L LJ R L N A A A A Y Y L* N* H U SP* MK MA SA KV A/OV M SM JSK/M STR UA MRL MRG SM- A UA R Resin guide type ø0, ø0, ø 000 ouble acting full cowling type -J, ø00 ø ø ø0, ø0, ø

3 Series SP* MK MA SA KV A/OV M SM JSK/M STR UA MRL MRG SM- A UA R Variation and option combination table ode Option Variation Port thread Accessory ouble acting basic type With resin guide Position locking ull cowling type NPT G ode ouble acting basic type Adjustable stroke both sides A Adjustable stroke R side A Adjustable stroke H side A or mounting adjustable stroke bracket afterwards A Table mounting thread size up H Port/cushion needle position specification R Port/cushion needle position specification Port/cushion needle position specification T Port/cushion needle position specification Port/cushion needle position specification S Port/cushion needle position specification X ylinder switch loating joint Y Thin floating joint Y Intermediate support bracket (00.L) L Intermediate support bracket (L) N mount With height adjustment plate U Note : Size of ø or less with a " " are available. (custom order) With resin guide Position locking ull cowling type NPT G Adjustable stroke both sides No G Q J N G A A A A H R T S X lank G Q J N G Variation Port thread Option Note : Standard : Option : Available (custom order) : Available depending on conditions (consult with K) : Not available Adjustable stroke R side Adjustable stroke H side or mounting adjustable stroke bracket afterwards Table mounting thread size up Port/cushion needle position specification Port/cushion needle position specification Port/cushion needle position specification Port/cushion needle position specification Port/cushion needle position specification Port/cushion needle position specification

4 <Example of model number> G Q L 0 Model no. A Mounting style Variation Tube *Indicate symbols on the bore size left table from left to right Model no.: rodless cylinder Piping screw type ushion 00 M0H E Stroke length Switch model no. G Switch quantity Variation: Resin guide type, position locking A Mounting style : Axial foot type : ø0mm Port thread type : Rc thread ushion : oth sides cushioned E Stroke length : 00mm Switch model no. : Reed MOH switch and lead wire m G Switch quantity : H Option : Adjustable full-stroke both sides, shock absorber and table mounting thread size up A H Series Variation and option selection table H Option *Indicate symbols on the left table from left to right SP* MK MA SA KV A/OV M SM JSK/M STR UA MRL MRG SM- A UA R

5 SP* MK MA SA KV A/OV M SM JSK/M STR UA MRL MRG SM- A UA R Individual precautions: rodless cylinder Series.ommon AUTION Pneumatic components Safety precautions Always read this section before starting use. Refer to Intro for cylinder, and Intro 8 for cylinder switch. Please watch out when designing intermediate stop circuit. With a slit rodless cylinder such as the, some air leaks due to the structure, so braking cannot be controlled with the all ports closed -position valve, and it may not be possible to hold the table stop position. Use a double sided pressurized control circuit having a P/A/ connection -position valve. If air pressure drops once and is then pressurized again unenergized, the table may move and the origin deviate. asic circuit diagram Horizontal load If piping is as shown in ig., equal pressure is applied on both sides of the piston when stopped, and the table will not pop out when restarting. ig. Vertical load If a vertical load is applied as shown in ig., the table will move in the direction of the load. Thus, install a regulator with check valve to reduce the thrust in the load direction and balance the load. esign & Selection With the slit rodless cylinder, such as the, external air leaks at a level that does not affect speed control. o not use for applications that require constant pressurization to only one side such as a balancer.. Position locking type -Q AUTION ylinder load factor must be 0% or less. If the load factor is high, the lock may not be released or the lock section could be damaged. When operating with 00mm/s or more, entry speed of position locking mechanism should be 00mm/s or less. Install an external shock absorber or deceleration circuit, etc. to decelerate.. ull cowling type -J AUTION o not use in an environment where it may contact welding spatters, etc. Use the full cowling type super rodless cylinder (SR-J) in this case. Precautions for full cowling type (-J) When installing a wall to keep dirt or coolant away from the device, be sure the wall is nonmagnetic (aluminum, brass, etc.). or a magnetic material (steel plate, etc.), separate the wall at least 0 mm from the switch edge. (all bore sizes) ylinder Switch 0mm and over 8 ig.

6 . ommon How to adjust stroke adjustment unit Stopper bolt Stopper bolt square nut Adaptor fixing bolt Adaptor WARNING () Moving the stroke adjustment unit The stroke adjustment unit is moved by loosening the adapter fixing bolt (adapter fixing bolt and stroke adjustment plate fixing bolt for to mm bore). () ixing the stroke adjustment unit After moving the stroke adjustment unit to the required position, tighten and fix the adapter fixing bolt (adapter fixing bolt and stroke adjustment plate fixing bolt for to mm bore) using values in Table 8. If tightened at a lower value, the stroke adjustment unit may deviate. Table Tightening torque for adapter fixing bolt and stroke adjustment plate fixing bolt Tightening torque Model -/ / -80/00 ø to ø Adaptor fixing bolt (N/cm) 00 to 0 0 to 0 0 to 0 00 to to to to 000 Adjustable stroke plate fixing bolt Adjustable stroke plate Shock absorber square nut Shock absorber Adaptor Installation & Adjustment Stopper bolt square nut Stopper bolt Adjustable stroke plate ixing bolt (N/cm) 0 to 0 0 to 0 ()Stroke adjustment using stopper bolt With to 0mm bore, clearance between the table and stroke adjustment plate is small, and fingers may be pinched during adjustment. The stroke must basically be adjusted by moving the stroke adjustment unit. Loosen the stopper bolt lock nut, turn the stopper bolt, and adjust the stroke. After adjusting the stroke, tighten and fix the stopper bolt lock nut using values in Table. () Adjusting shock absorber Shock absorber absorbed energy is adjusted by changing the working stroke of the shock absorber. Adjust the shock absorber working stroke by loosening the shock absorber lock nut and turning the shock absorber. After adjusting, tighten the shock absorber fixing nut with the tightening torque shown below. { } ø to ø Adaptor fixing bolt Shock absorber square nut Shock absorber Table Tightening torque of stopper bolt fixing nut, shock absorber fixing nut Tightening torque Model -/ /00 ylinder stroke end Type type -/ / -80/00 Adaptor Stopper bolt square nut Stopper bolt Slight margin at shock absorber stroke. Square nut (N/cm) 0 to 0 0 to to 00 to to to to to 00 to ø00 Adjust the position of the shock absorber until the rod end touches it. ylinder stroke end Absorbed energy (J) Series Specific precautions Adaptor fixing bolt Shock absorber square nut Shock absorber Square nut (N/cm) 0 to 80 to 0 to 00 0 to to to to to 000 ()Precautions upon use The shock absorber absorbs rated energy with the rated stroke. When the product is shipped, the shock absorber is installed with a slight margin to the stroke at the cylinder stroke limit. Absorbed energy is smaller than allowable energy absorption for the individual shock absorber, so if rated absorbed energy is required, adjust so the full stroke for the shock absorber is used. (note) This is a description of the shock absorber included in the full stroke adjustment type. Allowable energy absorption differs with collision speed, so if collision speed is 000 mm/s, check that one-third of the maximum energy absorption in Table is not exceeded. If collision speed is 000 mm/s, check that one-half of the maximum energy absorption is not exceeded. Table Adjustable full-stroke shock absorber specifications (initial setpoint) Valid mm stroke (mm).. SP* MK MA SA KV A/OV M SM JSK/M STR UA MRL MRG SM- A UA R

7 Series SP* MK MA SA KV A/OV M SM JSK/M STR UA MRL MRG SM- A UA R AUTION Avoid electrical welding after installing the rodless cylinder. If the current flows into the cylinder and generates sparks between the dust-proof belt and cylinder tube, the dust-proof belt may be damaged. If a unit with excessive inertia, etc., is moved, the cylinder may be damaged or faulty operation occur. Use only within the allowable range. o not apply shock or excessive moment on the table. Align before connecting to an load with an external guide mechanism. arefully consider connection (floating) so deviation is absorbed.the longer the stroke, the greater the shaft center may deviate. heck that moment, including inertia generated when moving or stopping the load, does not exceed the allowable load, or damage may result. Exceeding this value will result in damage. (When the overhang is large) If overhang is large and the cylinder is stopped at both ends with the piston, the bending moment functions due to load inertia even within internal cushion energy absorption. If kinetic energy is large and an external cushion, etc., is used, try contact with the work-piece center of gravity when possible. (When using an external stopper) When selecting an external stopper, consider the bending moment generated by cylinder thrust. Moment that functions when stopping with external stopper M=/ (When using an external guide) When an external guide is installed, if the center is not aligned, movement is not smooth and resistance caused by twisting functions as moment. Example of guide use : ylinder thrust : istance from cylinder center to stopper Piping port position and operating direction ø to 0. Option symbol (lank, R,, T) L L0 L side L L0 L0 R indicates R side pressurized port and L indicates L side pressurized port. efore shipping, all ports other than each at R and L are sealed with plugs. Piping to other ports becomes possible by removing plug. Option symbol (, S) are not available. ø to ø. Option symbol (lank, R,, T) L R0 R0 L R R side R indicates R side pressurized port and L indicates L side pressurized port. efore shipping, all ports other than each at R and L are sealed with plugs. Piping to other ports becomes possible by removing plug. However, bottom side piping is not possible. Select options (, S) if such connection is necessary. or option symbols (, S) (bottom piping) L L0 L side L side L0 L0 L R indicates R side pressurized port and L indicates L side pressurized port. L here are no ports other than R or L, so pipes cannot be connected. R0 R0 R L R R side R side R0 L R0 L R L R R 000

8 Series Specific precautions and 00. Option symbol (lank, R,, T) L0 L side L0 L0 R indicates R side pressurized port and L indicates L side pressurized port. efore shipping, all ports other than each at R and L are sealed with plugs. Piping to other ports becomes possible by removing plug. or option symbols (, S) (bottom piping) L L side L L L R0 L R0 R L R side There are no ports other than R or L, so pipes cannot be connected. R R R side K shock absorbers are consumables. Replace the shock absorber if energy absorption performance drops or if movement is no longer smooth. Mount the switch in parallel to the mounting groove so that force is not applied on the lead wires. ylinder switch ylinder R0 R Install on parallel L L R. Position locking type -Q WARNING How to adjust stroke adjustment unit Position locking unit Lock pin Model -Q-/ -Q-0 -Q- -Q- -Q-0 -Q-0/ -Q-80/00 Adaptor Adaptor ixing bolt Position locking unit can be moved by loosening the adaptor fixing bolt. Select shock absorber (A, A, A) in this case. If the stroke is finely adjusted with the shock absorber, the position locking unit deviates and the position cannot be completely locked. inely adjust stroke with the adapter fixing bolt. After moving to the required position, tighten and fix the adapter fixing bolt using the values below. The position locking unit may deviate if the bolt is not tightened to these values. heck that the locking mechanism works when a load is set. Adaptor fixing bolt tightening torque (N cm) 00 to 0 0 to 80 0 to 0 00 to to to to 000 Piping Piping is required for the position locking unit. Load Port R Position locking unit port Port L (side without locking mechanism) ranch pipe to the rodless cylinder R side using a tee union, etc., and pipe to the position locking unit with similar piping. If the piping on the side where the locking mechanism is provided is long and thin, or if the speed controller is separated from the cylinder port, the exhaust speed will drop and it may take longer for the lock to be applied. This may also occur if the silencer on the valve's EXH port is clogged. SP* MK MA SA KV A/OV M SM JSK/M STR UA MRL MRG SM- A UA R Supply pressure above the minimum working pressure to the position locking unit port. 00

9 Series SP* MK MA SA KV A/OV M SM JSK/M STR UA MRL MRG SM- A UA R Unlocking manually Release the position locking pin with a rod-shaped object. Supply pressure to port L to check that load is not applied to the locking mechanism before releasing the lock. If both ports R and L are exhausted and pressure is supplied to port R while the piston is locked, the lock is released and the table may suddenly move, creating a hazard. Lock pin Valves If the cylinder is held while pressure is applied on the locking mechanism, the locking pin may dislocate and cause danger. o not use a -position closed center or P/A/ connection valve. If back pressure is applied while locked, the lock may be released. Use a discrete valve, or use an individual exhaust manifold. ropping speed is increased with a quick exhaust valve, the cylinder may move faster than the locking pin and prevent proper release. o not use quick exhaust valves for position locking cylinders.. ull cowling type -J AUTION Take care not to catch hands or fingers when adjusting the switch. Avoid installing in reverse. irt may accumulate or operation be inhibited by accumulated fluid. 00

10 . Position locking type -Q WARNING or safety purposes, prevent the load from dropping under its own weight during maintenance. When using the cylinder with air cushion, if the air cushion needle on the lock mechanism side is too tight, the piston could bounce at the stroke end causing the lock lever and lock pin to collide and damage the locking mechanism. If the air cushion needle is opened too far, the piston could spring back at the stroke end and cause similar damage. Adjust the air cushion needle so that the piston does not bounce. When stopping with an external shock absorber, etc., adjust in the same way to prevent bouncing. Regularly (once or twice a year) check that the holding section is not damaged by this symptom. AUTION If the locking mechanism has been manually operated, check and then return it manually to the original position.o not use a manual override except during adjustment. Release the lock when installing or adjusting the cylinder. The lock could be damaged if the cylinder is installed while the lock is applied. o not use multiple cylinders synchronized. o not move more than one workpiece using more than two cylinders with position locking mechanism simultaneously. One of the cylinders may become unable to unlock. Use the speed control valve with meter-out control. Locks may not be released during meter-in control. Always use up to the stroke end of the side with the lock. If the cylinder's piston does not reach the stroke end, the lock may not be applied or may not be released. Apply grease to sliding section of lock lever periodically. uring Use & Maintenance. ull cowling type -J AUTION Suspended particles such as fiber, feathers, or powder may pass through the table adapter passage under the cover and adhere to the cylinder, leading to operation faults. If coolant (oil) or cutting chips scatter with force, or if they scatter from an inclined direction, provide another cover on the cylinder and sides, etc. o not let particles get stuck in the clearance of to mm between the sliding section(table adaptor) and the cover. Regularly remove particles on top of the cover and inside the cover. The product may be damaged if this is left as is. This product provides clearance under the cover for passing the table adapter through. Therefore, there is a risk of particles entering the cover. <Simplified view of entry path> o not get on the cover. It could break. Series Specific precautions SP* MK MA SA KV A/OV M SM JSK/M STR UA MRL MRG SM- A UA R 00

11 SP* MK MA SA KV A/OV M SM JSK/M STR UA MRL MRG SM- A UA R Specifications escriptions Actuation Working fluid Max. working pressure Min. working pressure Withstanding pressure Ambient temperature Port size Stroke tolerance Working piston speed ushion Lubrication mm MPa MPa MPa mm mm/s ø ø ø0 ø ø ø0 ø0 ø ouble acting ompressed air to 0 M Rc /8 Rc / Rc / (up to 000), 0 (up to 000), (up to 000) Rc / ø00 0 to 000 (standard port piping) (note ) Air cushion Not required (continuously lubricate using turbine oil class ISOVG if lubricated.) Note : Piston speed used with common port piping differs depending on the stroke. ontact K for details. Allowable energy absorption (mm) ø ø ø0 ø ø ø0 ø0 ø ø00 ushioned No cushion Allowable energy absorption (J) ushion mm stroke (mm) Allowable energy absorption (J) Absorbed energy (J) Valid mm stroke (mm) Note: The minimal stroke for full stroke adjustment models with switches are shown in ( ) With shock absorber (initial setpoint) M type switch quantity and min. stroke length (mm) Switch quantity Switch model no. (mm) M*V M*H ø (0) 0 (0) ø (0) 0 (0) ø (0) 0 (0) ø (0) 0 (0) ø ø ø0 0 0 ø ø Note: The minimal stroke for full stroke adjustment models with switches are shown in ( ). Switch quantity Switch model no. (mm) ø ø ø0 ø ø ø0 ø0 ø ø00 T*V T*H Series : JIS symbol M*V M*H M*V T type switch quantity and min. stroke length (mm) T*V T*H 0(0) 0(0) 0(0) 0(0) T*V ø, ø, ø0, ø, ø ø0, ø0, ø,, ø00 M*H T*H 00(0) 00(0) 00(0) 00(0) Stroke length (mm) ø ø ø0 ø ø ø0 ø0 ø ø00 M*V T*V 0 0 M*H (0) (0) (0) (0) T*H 0(0) 0(0) 0(0) 0(0) Standard stroke length (mm) 00,00 00,00 00,00 800,0 000 M*V Max. stroke length (mm) M*H (0) 0 80(0) 0 80(0) 0 80(0) T*V T*H 00(0) 00(0) 00(0) 00(0) M*V Min. stroke length (mm) ** The intermediate stroke can be manufactured in mm increments. M*H 0 (0) 0 (0) 0 (0) 0 (0) T*V T*H 0(0) 0(0) 0(0) 0(0)

12 Switch specifications (M type switch) () color / color display escriptions Applications Output method Power voltage Load voltage Load current Light Leakage current escriptions Applications Power voltage Load voltage Load current Light Leakage current Switch specifications (T type switch) olor indicator type escriptions Applications Output method Power voltage Load voltage Load current Light Leakage current Strong magnetic field proof escriptions Applications Light Load voltage Load current Internal voltage drop Leakage current ylinder weight (mm) ø ø ø0 ø ø ø0 ø0 ø ø00 Proximity wire MWV MV and MH ( color indicator type) PL 0 to 0 V to 0mA LE (ON lighting) Red/green LE (ON lighting) ma or less / V to 0mA M0V and M0H PL, relay 0 VA to 0mA LE (ON lighting) Without indicator light 0mA Note : or M0* switch, if load current is within to 0mA, this switch can be used with VA and 8 VA. Note : Refer to for specifications of other switches. Proximity wire TYH/TYV TWH/TWV PL 0 to 0 V V ±0% to 0mA Red/green LE (ON lighting) ma or less Proximity switch TY and TYT PL Red/green LE (ON lighting) V ±0% to 0mA V or less.0ma or less Weight when stroke length is 0mm asic type oot type Weight per switch (00) (L) (L) (Including bracket) Proximity wire MH/MV MPH/MPV (ustom order) MWV PL, relay, I circuit or small solenoid valve NPN output PNP output NPN output. to 8 V 0 to 8 V 0 V or less 00mA or less 00mA or less 0mA or less LE (ON lighting) Yellow LE (ON lighting) Red/green LE (ON lighting) 0µA or less 0.0mA or less 0µA or less Reed wire MV and MH PL, relay, I circuit (w/o lamp), serial connection Red/green LE (ON lighting) // V 0mA or less Red/green LE (ON lighting) Unit: kg Additional weight per St=00mm µA or less Series Specifications 0 VA or less 0mA or less Proximity wire TYH/TYV TWH/TWV PL, relay NPN output NPN output 0 to 8 V 0 V or less 0mA or less Red/green LE (ON lighting) SP* MK MA SA KV A/OV M SM JSK/M STR UA MRL MRG SM- A UA R 00

13 Series SP* MK MA SA KV A/OV M SM JSK/M STR UA MRL MRG SM- A UA R 00 How to order Without switch With switch 00 A Mounting style Note Port thread type ushion <Example of model number> M0H-R- 00 M0H E Stroke length R Switch model no. Note Model: A Mounting style : asic type : ømm Port thread type : Rc thread ushion : oth sides cushioned E Stroke length : 00mm Switch model no. : Reed switch M0H and lead wire m G Switch quantity : on rod end H Option : Port position, cushion needle position Note on model no. selection Note : When bore size,, 0,, and option symbol "R" and "T" is selected,mounting style will be "00" or "L". (Mounting style "L" is not available for option symbol "R" and "T" because it can not be piped ) Note : Refer to page 00 for minimum stroke with switch. Note : Switches not listed on option "" are also available. Refer to for more details (custom order) Note : The "*" mark on L* and N* indicates the quantity of sets. If sets are required, fill in "L" for L and "N" for L. pcs./set Note : Refer to dimensions on page 0 to 0for port, cushion needle position indication symbol. Note : Standard models of ø to ø needs to have their cover removed and full stroke adjustment mounted using a plate nut afterwards. "A" is a option that will have a plate nut for mounting installed beforehand so that it can be mounted afterwards without removing the cover. Note : Thread size will be M for ø and ø, and thread size will be M for ø0 when "H" is selected. Note 8: Refer to "Optional combination table" on the following page for available combinations. Note : opper and PTE free as standard. G Switch quantity H Option Note, Note Note, Note Note 8 A Mounting style 00 asic type L Axial foot type L Axial foot type (mm) lank N G ø ø ø0 ø ø ø0 ø0 ø ø00 *Lead wire length lank m (standard) m (option) m (option) G Switch quantity R One on R side L One on L side T pieces (fill in switch quantity if or more switches are required.) H Option (ø) (ø) Adjustable full-stroke R end only, with shock absorber Adjustable full-stroke L end only, with shock absorber Adjustable full-stroke bracket retrofitting loating joint Thin floating joint Intermediate support bracket (00, L) With intermediate support bracket (L) mount bracket Table mounting thread size up Height adjustment plate (standard) R (common port) R (common port) (common port) (standard) escriptions ushion R L N oth sides cushioned R side cushioned L side cushioned No cushion E Stroke length (mm) Stroke length Note ustom stroke length ø to ø00 to 000 y mm increment Switch model no. Lead wire Lead wire Lead Indicator Axial Radial wire A A A A Y Y L* N* H U lank R T S X Port thread type Rc thread NPT thread (ø0 and over) (custom order) G thread (ø0 and over) (custom order) M0H* MH* MH* MH* MPH* TWH* TYH* TWH* TYH* TY* TYT* Port position M0V* MV* MV* MWV* MV* MWV* MPV* TWV* TYV* TWV* TYV* ushion needle position ontact Reed Proximity color indicator type Without indicator light color indicator type color indicator type color indicator type color indicator type color indicator type (custom order) color indicator type Strong magnetic field proof (A magnetic field dedicated) -wire -wire -wire -wire -wire -wire -wire

14 Option combination table : ombination available : ombination not available Option A A A A Y Y L* N* H U lank R T S X Option Height adjustment plate Table mounting thread size up mount bracket Intermediate support bracket (L) Intermediate support bracket (00, L) Thin type floating joint loating joint Adjustable full-stroke bracket retrofitting Adjustable full-stroke L end only, with shock absorber Adjustable full-stroke R end only, with shock absorber Adjustable full-stroke both ends, with shock absorber A A A A Port position and cushion needle position (common port) Port position, cushion needle position Port position, cushion needle position Port position R, cushion needle position (common port) Port position, cushion needle position Port position R, cushion needle position (common port) Port position, cushion needle position (standard) Y Y L* N* H U lank R T S X Note : Some combinations are not available depending on bore size. onfirm the conditions of options of H "How to order" on the previous page. Note : L can not be used if port position is. (ø, ø) Series How to order SP* MK MA SA KV A/OV M SM JSK/M STR UA MRL MRG SM- A UA R 00

15 Series SP* MK MA SA KV A/OV M SM JSK/M STR UA MRL MRG SM- A UA R How to order switch Switch body + mounting bracket (Note ) Switch model no. (Page 00 section) Only switch body SW Mounting bracket (Note ) M type switch Lead wire holder (Note ) iscrete shock absorber model no. M0H* M0H* Switch model no. (Page 00 section ) M MH NK Applicable shock absorber model No. Model Shock absorber model no. - NK NK NK NK NK NK NK NK NK NK-00-0 (Refer to page 0 to 0 for configurations ) *Lead wire length lank m (standard) m (option) m (option) "*" mark indicates length of lead wire. T type switch Note : Lead wire holder is not included in the switch and its mounting bracket. When a lead wire holder is necessary, place an order separately. Note : M type switch and T type switch has different brackets. Note : Lead wire holder comes in a set of 0 pcs. (Square nut pc., hex nut for fixing shock absorber pc.) Square nut for shock absorber for -0 is a special design. iscrete mount bracket model no. (for ø to ø) ( mount bracket and mounting bolt pc.) loating joint set model no. 0 (Page 00 section) 0 (Page 00 section ) 0 Y (Page 00 section ) (Mount, mount base, pin, plain washer, pan head machine screw with spring washer and mounting bolts) T iscrete intermediate support bracket model no. L L Adjustable full-stroke kit model no. Repair parts model no. K Mounting bracket model no. Mounting style (L and L) (Page 00 section ) (Plate and mounting bolt pc.) A ( set) Height adjustment plate set model no. 0 (Page 00 section ) A 0 (Page 00 section) 0 0 L (Page 00 section ) (Page 00 section ) U ( piece/ set) N ( piece/ set) 00 Stroke length (Page 00 section E ) 0 (racket piece and mounting bolt pc.) (Page 00 section ) 008

16 Series Internal structure and parts list Internal structure and parts list Parts list No. Parts name Material Remarks elt cover over (L) Table cover Spring elt tension Polyamide Aluminum alloy Polyacetal resin Steel Polyacetal resin aking finish lackening Parallel pin (ø to ø0) Stainless steel Shaft (ø to ø0) Steel 8 0 Table Seal belt ust-proof belt Magnet ushion adapter over (R) elt spacer Hexagon socket set screw Hexagon socket bolt Hexagon socket bolt Hexagon socket bolt Aluminum alloy Urethane rubber Stainless steel + nitrile rubber Special alloy Polyacetal resin Aluminum alloy Steel Alloy steel Alloy steel Stainless steel Alloy steel Alumite Nickeling aking finish Repair parts list Tube (mm) ø ø ø to ø Kit No. -K-* -K-* Repair parts number No. Parts name Material Remarks 8 Needle gasket ushion needle Nitrile rubber Steel 0 Plug (ø, ø) rass Nickeling Plug (ø0 to ø0) Steel 8 ushion packing seal Piston packing seal Yoke Piston ylinder tube ylinder gasket O ring for common port ust wiper -side adhesive tape Urethane rubber Nitrile rubber Aluminum alloy Polyacetal resin Aluminum alloy Nitrile rubber Nitrile rubber Polyacetal resin Stainless steel (ø to ø0) Alumite Alumite 0 Plate ross-recessed tapping screw Alloy steel (ø to ø0) Stainless steel SP* MK MA SA KV A/OV M SM JSK/M STR UA MRL MRG SM- A UA R ø0-0k-* 8 8 ø ø ø0 -K-* -K-* -0K-* 8 Note: Specify the kit no. when placing an order. Specify the stroke length for *. 00

17 Series SP* MK MA SA KV A/OV M SM JSK/M STR UA MRL MRG SM- A UA R Internal structure and parts list Parts list No. Parts name Material Remarks 8 0 elt cover over (L) Table cover Spring elt tension Shaft Table Seal belt ust-proof belt Magnet ushion ring over (R) elt spacer Hexagon socket set screw Hexagon socket bolt Hexagon socket bolt Polyamide Aluminum alloy Polyacetal resin Steel Polyacetal resin Steel Aluminum alloy Urethane rubber Stainless steel + nitrile rubber Special alloy Polyacetal resin Aluminum alloy Steel Alloy steel Alloy steel Stainless steel aking finish lackening Alumite Nickeling aking finish Repair parts list Tube (mm) ø0 ø ø0 to ø Kit No. -0K-* -K-* Repair parts number Note: Specify the kit no. when placing an order Specify stroke length for "*". No. Parts name Material Remarks Hexagon socket bolt Needle gasket ushion needle Plug ushion packing seal Piston packing seal Yoke Piston ylinder tube ylinder gasket O ring for common port ust wiper -side adhesive tape Plate ross-recessed tapping screw ushion ring gasket Alloy steel Nitrile rubber Steel Steel Urethane rubber Nitrile rubber Aluminum alloy Polyacetal resin Aluminum alloy Nitrile rubber Nitrile rubber Polyacetal resin Alloy steel Stainless steel Nitrile rubber Alumite Alumite 00

18 Internal structure and parts list Parts list No. Parts name Material Remarks 8 0 elt cover over (L) Table cover Spring elt tension Shaft Table Seal belt ust-proof belt Magnet ushion ring over (R) elt spacer Hexagon socket set screw Hexagon socket bolt Hexagon socket bolt Hexagon socket bolt Repair parts list ø00 to ø00. Tube (mm) 8 Kit No. -80K-* -00K-* Polyamide Aluminum alloy Polyacetal resin Steel Polyacetal resin Steel Aluminum alloy Urethane rubber Stainless steel + nitrile rubber Special alloy Polyacetal resin Aluminum alloy Steel Alloy steel Alloy steel Stainless steel Alloy steel aking finish lackening Alumite Nickeling aking finish Note: Specify the kit no. when placing an order Specify stroke length for "*". 0 Repair parts number No. Parts name Material Remarks Needle gasket ushion needle Plug ushion packing seal Piston packing seal Yoke Piston ylinder tube ylinder gasket O ring for common port elt () elt () Plate ross-recessed tapping screw ushion ring gasket () ushion ring gasket () Plug Series Internal structure and parts list Nitrile rubber Steel Steel Urethane rubber Nitrile rubber Aluminum alloy Polyacetal resin Aluminum alloy Nitrile rubber Nitrile rubber Wool Wool Alloy steel Stainless steel Nitrile rubber Nitrile rubber Steel Alumite Alumite SP* MK MA SA KV A/OV M SM JSK/M STR UA MRL MRG SM- A UA R 0

19 Series SP* MK MA SA KV A/OV M SM JSK/M STR UA MRL MRG SM- A UA R imensions (ø to ø0) with cylinder switch -**-**-***-M*V* (Radial lead wire) PQ with cylinder switch -**-**-***-M*H* (Axial lead wire) -**-**-***-T*H with cylinder switch (T*W, T*Y or TY) -**-**-***-T*V with cylinder switch (T*W and T*Y) R: Max. sensitive position H: Max. sensitive position (mm) ø ø ø0 A T T A PP 0. -M HA G 0 J H E L side E H KA G TA T -TE depth TL HA 8. K H 8. J.. LL + stroke length L + stroke length.. Stroke length P + stroke length. PP H. R PA PP PA PP K M0V M0H K TYH KA. L LL. LA. M -Q H P R K TYV H H P H M0V K K M0H K TYH K TYV M depth M depth M depth. P 8 PQ. J H E R side Q M M Rc /8 (LA) HA TA T 8 0 R T 8 T 8 -plug -Q (plug) TE M depth M depth M depth 0 (mm) ø ø ø0 With switch H R M* T*Y* T*W M* T*Y* T*W PA P PP T*Y* TY T*W* M*V M*H T*YV T*YH Note : Refer to pages 08 to 0 for dimensions with options and dimensions of accessories TY T*WV T*WH

20 imensions (ø to ø0) with foot bracket -L-**-*** S -øx SA with foot bracket -L-**-*** S -øx SA T TG TY V U V U -Q (plug) W + stroke length W + stroke length U U V V Series ouble acting -Q SP* MK MA SA KV A/OV M SM JSK/M STR UA MRL MRG SM- A UA R (mm) ø ø ø0 With foot bracket (L) With foot bracket (L) SA S T U V W X SA S TG TY U V W X

21 K M0H K M0V M0V K K M0H Series SP* MK MA SA KV A/OV M SM JSK/M STR UA MRL MRG SM- A UA R imensions (ø to ø) with cylinder switch -**-**-***-M*V* (Radial lead wire) -M with cylinder switch -**-**-***-M*H* (Axial lead wire) with cylinder switch (T*W, T*Y, TY) -**-**-***-T*H with cylinder switch (T*W, T*Y) -**-**-***-T*V R: Max. sensitive position H: Max. sensitive position (mm) ø ø ø0 ø0 ø T T A A 80 8 PP 8. 8 PP PA PP PA PP 8 HA G 0 0 E J H L side L side H 8 E H KA G TE HA. 0 TA T H 0. LL + stroke length L + stroke length.. Stroke length P + stroke length H. R K TYH H 8... J 8 KA L 8. H P R K TYV LL LA H H P H K TYH TYV K.... H -Q M M depth M depth M8 depth M8 depth M0 depth J H R side R side P E 0 8 HA Q Rc /8 Rc / Rc / Rc /8 Rc /8 (LA) TA 8 8 R T T T Q (plug) TE M depth M depth. M depth M8 depth 0. M8 depth. 0 (mm) ø ø ø0 ø0 ø With switch H R M* T*Y* T*W M* T*Y* T*W PA P PP T*Y* TY T*W* M*V M*H T*YV T*YH Note : Refer to pages 08 to 0 for dimensions with options and dimensions of accessories TY T*WV T*WH

22 imensions (ø to ø) with foot bracket -L-**-***with foot bracket -L-**-***with foot bracket TY T TG -øx -øx S V U -øx U V SA W + stroke length S V U -Q (plug) U V SA W + stroke length Series ouble acting -Q SP* MK MA SA KV A/OV M SM JSK/M STR UA MRL MRG SM- A UA R (mm) With foot bracket (L) With foot bracket (L) SA S T U V W X X SA S TG TY U V W X ø ø ø0 ø0 ø spot face depth 8. spot face depth 8.. spot face depth

23 Series SP* MK MA SA KV A/OV M SM JSK/M STR UA MRL MRG SM- A UA R imensions ( to ø00) SRL with cylinder switch -**-**-***-M*V* (Radial lead wire) Eye bolt for mounting Tap -S T A PP SRL with cylinder switch -**-**-***-M*H* (Axial lead wire) PP with cylinder switch (T*W, T*Y, TY) -**-**-***-T*H PA PP ZA G -M L side with cylinder switch (T*W, T*Y) -**-**-***-T*V Z HA E Z J H E E Z H H KA T TA -TE L + stroke length.. Stroke length P+Stroke T H. H. R H P R H ZE J H HA E Z Z -Q E Q (plug) -R(Plug) R side R A -Q (plug) R: max. sensitive position H: max. sensitive position PA PP H P H (mm) ø00 A A E 8.. E G 0 HA 0 0 H H.. J 0 80 KA 08 L 00 0 M M depth 8 M depth 8 P Q Rc / Rc / R Rc /8 Rc / S M depth M depth 0 (mm) TA T T T TE ZA ø M depth M depth 0 0 Z Z. Z 0 ZE 0 0 With foot bracket SA S T U V W 0 Note : Refer to pages 08 to 0 for dimensions with options and dimensions of accessories. X

24 imensions ( to ø00) with foot bracket -L-**-***with foot bracket T -øx S V U U V SA W + stroke length Series ouble acting SP* MK MA SA KV A/OV M SM JSK/M STR UA MRL MRG SM- A UA R (mm) ø00 With switch H R M* T*Y* T*W M* T*Y* T*W PA P PP T*Y* TY T*W* M*V M*H T*YV T*YH TY T*WV T*WH

25 SP* MK MA SA KV A/OV M SM JSK/M STR UA MRL MRG SM- A UA R 08 Specifications escriptions Actuation Working fluid Max. working pressure Min. working pressure Withstanding pressure Ambient temperature Port size Stroke tolerance Working piston speed ushion Lubrication mm MPa MPa MPa mm mm/s -G ø ø ø0 ø ø ø0 ø0 ø ouble acting ompressed air to 0 M Rc /8 Rc / Rc / (up to 000), 0 (up to 000), 0 (up to 000) 0 to 000 (standard port piping) (note ) Air cushion Not required (use turbine oil lass ISO VG if lubricated) Note : Piston speed used with common port piping differs with the stroke. ontact K for details. Allowable energy absorption (mm) ø ø ø0 ø ø ø0 ø0 ø ø00 ushioned No cushion With shock absorber (initial setpoint) Allowable energy absorption (J) ushion mm stroke (mm) Allowable energy absorption (J) Absorbed energy (J) Valid mm stroke (mm) M type switch quantity and min. stroke length (mm) Switch quantity Switch model no. (mm) M*V M*H M*V M*H T type switch quantity and min. stroke length (mm) Note: The minimal stroke for full stroke adjustment models with switches are shown in ( ). M*V M*H ø (0) 0 (0) ø (0) 0 (0) ø (0) 0 (0) ø (0) 0 (0) ø ø ø0 0 0 ø ø Note: The minimal stroke for full stroke adjustment models with switches are shown in ( ). Switch quantity Switch model no. (mm) ø ø ø0 ø ø ø0 ø0 ø ø00 T*V T*H , resin guide type -G Series ø: ø, ø, ø0, ø, ø ø0, ø0, ø,, ø00 JIS symbol T*V T*H 0 (0) 0 (0) 0 (0) 0 (0) T*V T*H 00 (0) 00 (0) 00 (0) 00 (0) Rc / ø00 Stroke length (mm) ø ø ø0 ø ø ø0 ø0 ø ø00 Standard stroke length (mm) 00,00 00,00 00,00 800,0 000 Max. stroke length (mm) 000 Min. stroke length (mm) ** The intermediate stroke can be manufactured in mm increments. M*V T*V 0 0 M*H (0) (0) (0) (0) T*H 0 (0) 0 (0) 0 (0) 0 (0) M*V M*H 0 80 (0) 0 80 (0) 0 80 (0) 0 80 (0) T*V T*H 00 (0) 00 (0) 00 (0) 00 (0) M*V M*H 0 (0) 0 (0) 0 (0) 0 (0) T*V T*H 0 (0) 0 (0) 0 (0) 0 (0)

26 Switch specifications (M type switch) One color/bi-color indicator Proximity wire escriptions MWV MV and MH ( color indicator type) Applications PL Output method Power voltage Load voltage 0 to 0 V Load current to 0mA Light LE (ON lighting) Red/green LE (ON lighting) Leakage current ma or less escriptions Applications Power voltage Load voltage Load current Light Leakage current Switch specifications (T type switch) olor indicator type escriptions Applications Output method Power voltage Load voltage Load current Light Leakage current Strong magnetic field proof escriptions Applications Light Load voltage Load current Internal voltage drop Leakage current ylinder weight (mm) ø ø ø0 ø ø ø0 ø0 ø ø00 / V to 0mA M0V and M0H PL, relay 0 VA to 0mA LE (ON lighting) Without indicator light 0mA Note : or M0* switch, if load current is within to 0mA, this switch can be used with VA and 8 VA. Note : Refer to for other switch specifications. Proximity wire TYH/TYV TWH/TWV PL 0 to 0 V V ±0% to 0mA (Note ) Red/green LE (ON lighting) ma or less Proximity wire TY and TYT PL Red/green LE (ON lighting) V ±0% to 0mA V or less.0ma or less Weight when stroke length is 0mm asic type oot type Weight per switch (00) (L) (L) (Including bracket) Proximity wire MH/MV MPH/MPV (ustom order) MWV PL, relay, I circuit or small solenoid valve NPN output PNP output NPN output. to 8 V 0 to 8 V 0 V or less 00mA or less 00mA or less 0mA or less LE (ON lighting) Yellow LE (ON lighting) Red/green LE (ON lighting) 0µA or less 0.0mA or less 0µA or less Reed wire MV and MH PL, relay, I circuit(w/o lamp), serial connection Red/green LE (ON lighting) // V 0mA or less Red/green LE (ON lighting) Unit: kg Additional weight per St=00mm µA or less -G Series Specifications 0 VA or less 0mA or less Proximity wire TYH/TYV TWH/TWV PL, relay NPN output NPN output 0 to 8 V 0 V or less 0mA or less Red/green LE (ON lighting) SP* MK MA SA KV A/OV M SM JSK/M STR UA MRL MRG SM- A UA R 0

27 -G Series SP* MK MA SA KV A/OV M SM JSK/M STR UA MRL MRG SM- A UA R How to order Without switch -G With switch -G 00 A Mounting style Note Note on model no. Port thread type 00 M0H R ushion <Example of model number> -G M0H-R- E Stroke length Note : When bore size,, 0,, and option symbol "R" and "T" is selected, mounting style will be "00" or "L". (Mounting style "L" is not available for option symbol "R" and "T" because it can not be piped. ) Note : Refer to page 08 for the minimal stroke for models with a switch. Note : Switches other than switch model no. are also available to. (ustom order) Refer to for details. Note : The asterisk (*) following L* and N* indicates the number of brakets. ill in "L" for L and "N" for L when sets are necessary. piece/ set Note : or port and cushion needle position indicating symbol Refer pages 0 to 0 to dimensions. Note : Standard models of ø to ø needs to have their cover removed and full stroke adjustment mounted using a plate nut afterwards. "A" is a option that will have a plate nut for mounting installed beforehand so that it can be mounted afterwards without removing the cover. Note : Thread size will be M for ø and ø, and thread size will be M for ø0 when "H" is selected. Note 8: Refer to "Optional combination table" on the following page for available combinations. Note : opper and PTE free as standard. Model: guided A Mounting style : asic type : ømm Port thread type : Rc thread ushion : oth sides cushioned E Stroke length : 00mm Switch model no. : Reed switch M0H and lead wire m G Switch quantity : on rod end H Option : Port position, cushion needle position Switch model no. G Switch quantity H Option Note, Note Note, Note A Mounting style 00 asic type L Axial foot type L Axial foot type (mm) ø ø 0 ø0 ø ø 0 ø0 0 ø0 ø ø00 Port thread type lank N G R L N E *Lead wire length lank m (standard) m (option) m (option) A A A A L* N* H U lank R T S X ushion oth sides cushioned R side cushioned L side cushioned No cushion Stroke length (mm) ø to ø00 Lead wire Axial M0H* MH* MH* MH* MPH* TWH* TYH* TWH* TYH* TY* escriptions G Switch quantity R One on R side L One on L side T pieces (fill in switch quantity if or more switches are required.) H Rc thread NPT thread (ø0 and over) (custom order) G thread (ø0 and over) (custom order) Option Stroke length Note to 000 Switch model no. Lead wire Radial M0V* MV* MV* MWV* MV* MWV* MPV* TWV* TYV* TWV* TYV* TYT* (ø) Adjustable full-stroke both sides and shock absorber Adjustable full-stroke R sides and shock absorber Adjustable full-stroke L sides and shock absorber Adjustable full-stroke bracket retrofitting Intermediate support bracket (00, L) With intermediate support bracket (L) mount bracket Table mounting thread size up Height adjustment plate Port position (standard) R (common port) R (common port) (common port) ushion needle position (standard) ontact Reed Proximity ustom stroke length y mm increment Indicator color indicator type Without indicator light color indicator type color indicator type color indicator type color indicator type color indicator type (custom order) color indicator type Strong magnetic field proof (A magnetic field dedicated) Lead Line -wire -wire -wire -wire -wire -wire -wire

28 Option combination table : ombination possible : ombination not available Option A A A A L* N* H U lank R T S X Option Height adjustment plate Table mounting thread size up mount bracket Intermediate support bracket (L) Intermediate support bracket (00, L) Adjustable full-stroke bracket retrofitting Adjustable full-stroke L end only, with shock absorber Adjustable full-stroke R end only, with shock absorber Adjustable full-stroke both ends, with shock absorber AAAA Port position, cushion needle position (common port) Port position, cushion needle position Port position, cushion needle position Port position R, cushion needle position (common port) Port position, cushion needle position Port position R, cushion needle position (common port) Port position, cushion needle position (standard) L* N* H U lank R TSX Note : Some combinations are not available depending on bore size. onfirm the conditions of options of on the previous page. Note : L can not be used if port position is. (ø, ø) -G Series How to order H "How to order" SP* MK MA SA KV A/OV M SM JSK/M STR UA MRL MRG SM- A UA R 0

29 -G Series SP* MK MA SA KV A/OV M SM JSK/M STR UA MRL MRG SM- A UA R How to order switch Switch body + mounting bracket (Note ) SW iscrete shock absorber model no. M0H* Switch model no. (Page 00 section ) Only switch body Mounting bracket (Note ) M type switch Lead wire holder (Note ) M0H* Switch model no. (Page 00 section ) M MH NK (Page 00 section ) (Square nut pc., hex nut for fixing shock absorber pc.) Square nut for shock absorber for -0 is a special design. iscrete mount bracket model no. (for ø to ø) 0 ( mount bracket and mounting bolt pc.) (Refer to page 0 to 0 for configurations ) T type switch Note : Lead wire holder is not included in the switch and its mounting bracket. When a lead wire holder is necessary, place an order separately. Note : M type switch and T type switch has different brackets. Note. Lead wire holder comes in a set of 0 pieces. 0 Applicable shock absorber model No. Model Shock absorber model no. - NK NK NK NK NK NK NK NK NK NK-00-0 (Page 00 section ) *Lead wire length lank m (standard) m (option) m (option) "*" mark indicates length of lead wire. T iscrete intermediate support bracket model no. L L Adjustable full-stroke kit model no. Repair parts model no. -G K Mounting bracket model no. A Mounting style (L and L) A ( set) (racket piece and mounting bolt pc.) (Page 00 section ) Height adjustment plate set model no. 0 0 L (Page 00 section ) (Page 00 section ) 0 (Page 00 section ) 0 (Page 00 section ) U ( piece/ set) N ( piece/ set) 00 Stroke length (Page 00 section E ) 0 0 (Page 00 section ) (Plate, mounting bolt pc.)

30 Internal structure drawing and parts list (ø to ø0) Parts list No. Parts name Material Remarks Slider Slider plate Adjusting screw Repair parts list Tube bore size (mm) ø ø ø0 ø ø ø0 Kit No. -G-K-* -G-K-* -G-0K-* -G-K-* -G-K-* -G-0K-* Polyacetal resin Steel Alloy steel Repair parts number 8 8 Note : Specify the kit no. when placing an order Specify stroke length for "*". Note : Parts no. on 8 8 is based on page 00. -G Series Internal structure and parts list No. Parts name Material Remarks Nut Steel ust wiper Polyacetal resin SP* MK MA SA KV A/OV M SM JSK/M STR UA MRL MRG SM- A UA R 0

31 -G Series SP* MK MA SA KV A/OV M SM JSK/M STR UA MRL MRG SM- A UA R Internal structure drawing and parts list (ø0, ø) Parts list No. Parts name Material Remarks Slider Slider plate Adjusting screw Repair parts list ø0 ø Tube (mm) Kit No. -G-0K-* -G-K-* Polyacetal resin Steel Alloy steel Repair parts number 8 8 Note : Specify the kit no. when placing an order. Specify stroke length for "*". Note : Parts no. on 8 8 is based on page 00. No. Parts name Material Remarks Nut Steel ust wiper Polyacetal resin 0

32 -G Series Internal structure and parts list Internal structure drawing and parts list (, ø00) Parts list No. Parts name Material Remarks Slider Polyacetal resin Slider plate Steel Repair parts list ø00 Tube (mm) Kit No. -G-80K-* -G-00K-* Repair parts number Note : Specify the kit no. when placing an order Specify stroke length for "*". Note : Parts no. on is based on page 0. No. Parts name Material Remarks Adjusting screw Alloy steel Nut Steel SP* MK MA SA KV A/OV M SM JSK/M STR UA MRL MRG SM- A UA R 0

33 -G Series SP* MK MA SA KV A/OV M SM JSK/M STR UA MRL MRG SM- A UA R imensions (ø to ø0) -G with cylinder switch -G-**-**-***-M*V* (Radial lead wire) -M -G with cylinder switch -G-**-**-***-M*H* (Axial lead wire) -G with cylinder switch -G-**-**-***-T*H* (T*W, T*Y, TY) -G with cylinder switch -G-**-**-***-M*V* (T*W, T*Y) R: Max. sensitive position H: Max. sensitive position (mm) ø ø ø0 Y T T A A PQ A PP 0. HA G A 8 J H E L side 0 E H KA G HA 8. TA T -TE K H 8. J.. LL + stroke length L + stroke length.. Stroke length P + stroke length. PP H. R PA PP PA PP K K TYH M0V M0H H P R K TYV KA. L LL. LA. M M depth M depth M depth. H -Q H P H M0V K K K TYH K TYV M0H P 8 PQ. R side Q M M Rc /8 J H E TA HA T 8 0 (LA) T 8 T 8 R TE M depth M depth M depth -plug -Q (plug) Y to 8 to to 0 (mm) ø ø ø0 With switch H R M* T*Y* T*W M* T*Y* T*W PA P PP T*Y* TY T*W* M*V M*H T*YV T*YH Note : Refer to pages 08 to 0 for dimensions with options and dimensions of accessories TY T*WV T*WH

34 imensions (ø to ø0) -G with foot bracket -G-L-**-*** Y S -ØX SA -G with foot bracket -G-L-**-*** Y S -ØX SA T TG TY V U V U -Q (plug) W + stroke length W + stroke length -G Series ouble acting resin guide type U U V V -Q SP* MK MA SA KV A/OV M SM JSK/M STR UA MRL MRG SM- A UA R (mm) ø ø ø0 With foot bracket (L) With foot bracket (L) SA S T U V W X SA S TG TY U V W X

35 -G Series SP* MK MA SA KV A/OV M SM JSK/M STR UA MRL MRG SM- A UA R imensions (ø to ø) -G with cylinder switch -G-**-**-***-M*V* (Radial lead wire) -G with cylinder switch -G-**-**-***-M*H* (Axial lead wire) -G with cylinder switch -G-**-**-***-T*H(T*W, T*Y, TY) -G with cylinder switch -G-**-**-***-T*V(T*W, T*Y) R: Max. sensitive position H: Max. sensitive position (mm) ø ø ø0 ø0 ø A M Y T T A 0 0 PP PP PA PP PA PP 8 HA G L side E J H E G 0... H HA. 0 H H KA 0. H 8... T -TE J K 8 TA K M0V KA LL + stroke length L + stroke length.. Stroke length P + stroke length. H. R K TYH M0H H P R K TYV H P H L 8 LL LA.... K K TYH TYV K M0V M0H K M M depth M depth M8 depth M8 depth M0 depth P 0 8 H -Q Q Rc /8 Rc / Rc / Rc /8 Rc /8 H TA 8 8 J H E T (LA) HA R side T T R TE M depth M depth. M depth M8 depth 0. M8 depth. -Q (plug) Y 8 to to to 8 to to 8 08 (mm) With switch H R M* T*Y* T*W M* T*Y* T*W PA P PP T*Y* TY T*W* M*V M*H T*YV T*YH ø ø ø0 ø0 ø Note : Refer to pages 08 to 0 for dimensions with options and dimensions of accessories TY T*WV T*WH

36 imensions (ø to ø) -G-L-**-***with foot bracket (ø to ø) T -G-L-**-***with foot bracket (ø,ø) TY TG -ØX S V U -ØX U V SA W + stroke length Y Y -ØX S V U -Q (plug) U V SA W + stroke length -G Series ouble acting resin guide type -Q SP* MK MA SA KV A/OV M SM JSK/M STR UA MRL MRG SM- A UA R (mm) With foot bracket (L) With foot bracket (L) SA S T U V W X X SA S TG TY U V W X ø ø ø0 ø0 ø spot face depth 8. spot face depth 8.. spot face depth

37 -G Series SP* MK MA SA KV A/OV M SM JSK/M STR UA MRL MRG SM- A UA R imensions ( to ø00) -G-**-**-***-M*V* (with cylinder switch) (Radial lead wire) Eye bolt for mounting Tap -S Y T A L side PP G -G-**-**-***-M*H* (with cylinder switch) (Axial lead wire) -G-**-**-***-T*H (T*W, T*Y, TY) with cylinder switch -G-**-**-***-T*V (T*W, T*Y) with cylinder switch Z Z PP PA PP PA PP ZA -M HA E J H E E Z H H KA T TA -TE T L + stroke length.. Stroke length P + stroke length H. H. R H P R H P R H J H E Z HA -Q Z E Q (plug) R (plug) R R side A -Q (plug) R: Max. sensitive position H: Max. sensitive position (mm) ø00 A A E 8.. E G 0 HA 0 0 H H.. J 0 80 KA 08 L 00 0 M M depth 8 M depth 8 P Q Rc / Rc / R R R S M depth M depth TA 8 8 T 0 0 (mm) T T TE Y ZA Z Z Z 00 ø M depth M depth to 8 to With foot bracket SA S T U V W 0 Note : Refer to pages 08 to 0 for dimensions with options and dimensions of accessories. X

38 imensions ( to ø00) -G-L-**-***with foot bracket T Y S SA -øx V U U V W + stroke length -G Series ouble acting resin guide type SP* MK MA SA KV A/OV M SM JSK/M STR UA MRL MRG SM- A UA R (mm) ø00 With switch H R M* T*Y* T*W M* T*Y* T*W PA P PP T*Y* TY T*W* M*V M*H T*YV T*YH TY T*WV T*WH

39 SP* MK MA SA KV A/OV M SM JSK/M STR UA MRL MRG SM- A UA R Specifications escriptions mm Actuation Working fluid Max. working pressure MPa Min. working pressure MPa Withstanding pressure MPa Ambient temperature ylinder section Port size Position locking unit Stroke tolerance Working piston speed ushion Lubrication Position locking mechanism Holding force mm mm/s N -Q ø ø ø0 ø ø ø0 ø0 ø 0. ouble acting ompressed air to 0 0. M M Allowable energy absorption (mm) ø ø ø0 ø ø ø0 ø0 ø ø00 Rc /8 Rc / Rc /8 Rc /8 Rc / ø (up to 000) 0 (up to 000) 0 (up to 000) 0 to 00 (standard port piping) (note ) Air cushion Not required (Use turbine oil lass ISOVG if lubricated. Lubricate continuously if lubricated. ) Installation on guard R Maximum thrust x 0. ushioned No cushion With shock absorber (initial setpoint) Allowable energy absorption (J) ushion mm stroke (mm) Allowable energy absorption (J) Absorbed energy (J) Valid mm stroke (mm) M type switch quantity and min. stroke length (mm) Switch quantity Switch model no. (mm) ø ø ø0 ø ø ø0 ø0 ø ø00 T type switch quantity and min. stroke length (mm) Switch quantity Switch model no. (mm) ø ø ø0 ø ø ø0 ø0 ø ø00 M*V T*V M*H T*H double acting/position locking -Q Series ø: ø, ø, ø0, ø, ø ø0, ø0, ø,, ø00 JIS symbol M*V T*V 0 0 M*H T*H M*V T*V M*H T*H Stroke length (mm) ø ø ø0 ø ø ø0 ø0 ø ø00 M*V T*V Note : ()The speed of entry to the position locking mechanism must not exceed 00mm/s when operating at a speed of 00 to 000mm/s. or common port pipe, working piston speed varies depending on stroke length. onsult with K. ()or deceleration method, install an external shock absorber or a deceleration circuit etc.. ()Apply grease to sliding section of lock lever periodically. Standard stroke length (mm) 00,00 00,00 00,00 800,0 000 Max. stroke length (mm) 000 Min. stroke length (mm) ** The intermediate stroke can be manufactured in mm increments. 0 0 M*H T*H M*V T*V M*H T*H M*V T*V M*H T*H Always safety precautions before starting use With position locking function Read pages 00 the to 00.

40 Switch specifications (M type switch) escriptions Applications Output method Power voltage Load voltage Load current Light Leakage current escriptions Applications Power voltage Load voltage Load current Light Leakage current Switch specifications (T type switch) olor indicator type escriptions Applications Output method Power voltage Load voltage Load current Light Leakage current Strong magnetic field proof escriptions Applications Light Load voltage Load current Internal voltage drop Leakage current ylinder weight (mm) ø ø ø0 ø ø ø0 ø0 ø ø00 Proximity wire MWV MV and MH ( color indicator type) PL only 0 to 0 V to 0mA LE (ON lighting) Red/green LE (ON lighting) ma or less / V to 0mA M0V and M0H PL, relay 0 VA to 0mA LE (ON lighting) Without indicator light 0mA Note : or M0* switch, if load current is within to 0mA, this switch can be used with VA and 8 VA. Note : Refer to for other switch specifications. Proximity wire TYH/TYV TWH/TWV PL only 0 to 0 V V ±0% to 0mA Red/green LE (ON lighting) ma or less Proximity wire TY and TYT PL Red/green LE (ON lighting) V ±0% to 0mA V or less.0ma or less Weight when stroke length is 0mm asic type oot type Weight per switch (00) (L) (L) (Including bracket) Proximity wire MH/MV MPH/MPV (ustom order) MWV PL, relay, I circuit or small solenoid valve NPN output PNP output NPN output. to 8 V 0 to 8 V 0 V or less 00mA or less 00mA or less 0mA or less LE (ON lighting) Yellow LE (ON lighting) Red/green LE (ON lighting) 0µA or less 0.0mA or less 0µA or less Reed wire MV and MH PL, relay, I circuit (w/o lamp), serial connection Red/green LE (ON lighting) // V 0mA or less Red/green LE (ON lighting) Unit: kg Additional weight per St=00mm µA or less -Q Series Specifications 0 VA or less 0mA or less Proximity wire TYH/TYV TWH/TWV PL, relay NPN output NPN output 0 to 8 V 0 V or less 0mA or less Red/green LE (ON lighting) SP* MK MA SA KV A/OV M SM JSK/M STR UA MRL MRG SM- A UA R 0

41 -Q Series SP* MK MA SA KV A/OV M SM JSK/M STR UA MRL MRG SM- A UA R How to order Without switch -Q With switch -Q 00 A Mounting style Note Port thread type 00 M0H R ushion Note on model no. selection Note : If Option "R" and "T" is selected for bore size,, 0,, or 0, the support type will be "00" or "L" (Option "R" and "T" with "L" support is not available since it can not be piped) Note : Refer to page 0 for minimum stroke with switch. Note : Switches not listed on option are also available. (custom order) Refer to for details. Note : Adjustable full-stroke bracket on the R side provided as standard for position locking models.. Therefore, only a shock absorber will be added to the R side when A is specified. If A is indicated, position locking, adjustable full stroke and shock absorber will be on the R side. (The following diagram) -Q -Q: A -Q: A both sides -Q: A <Example of model number> -Q M0H-R- E Stroke length Note : The asterisk (*) following L* and N* indicates the number of brakets. Indicate "L" for L and "N" for L when ordering sets. pieces/ set Note : Refer to dimensions on page 0 to 0for port and cushion needle position symbols. Note : Standard ø models needs to have its cover removed and full stroke adjustment mounted using a plate nut afterwards. "A" is a option that will have a plate nut for mounting installed beforehand so that it can be mounted afterwards without removing the cover. Note 8: Thread size for ø, ø will be "M" and ø0 will be "M" if "H" is selected. Note : heck the available combination of options on the "Option combination table" on the next page. Note 0: opper and PTE free as standard Model: with position locking function A Mounting style : asic type : ømm Port thread type : Rc thread ushion : oth sides cushioned E Stroke length : 00mm Switch model no. : Reed switch M0H and lead wire m G Switch quantity : on rod end H Option : Port position, cushion needle position Switch model no. Note G Switch quantity H Option Note, Note Note, Note Note 8, Note A Mounting style 00 asic type L Axial foot type L Axial foot type (mm) ø ø ø0 ø ø ø0 ø0 ø ø00 escriptions Port thread type lank Rc thread N G NPT thread (ø0 and over) (custom order) G thread (ø0 and over) (custom order) ushion oth sides cushioned R R side cushioned L L side cushioned N No cushion E Stroke length (mm) Stroke length Note ustom stroke length ø to ø00 to 000 y mm increment Switch model no. Lead wire Lead wire Axial Radial M0H* M0V* MH* MV* MH* MV* MWV* MH* MV* MWV* MPH* MPV* TWH* TWV* TYH* TYV* TWH* TWV* TYH* TYV* TY* TYT* *Lead wire length lank m (standard) m (option) m (option) G Switch quantity R One on R side L One on L side T pieces (fill in switch quantity if or more switches are required.) H A A A A Y Y L* N* H U lank R T S X Option (ø) Adjustable full-stroke both ends, with shock absorber Adjustable full-stroke R end only, with shock absorber Adjustable full-stroke L end only, with shock absorber Adjustable full-stroke bracket retrofitting loating joint Thin floating joint Intermediate support bracket (00, L) With intermediate support bracket (L) Table mounting thread size up Height adjustment plate Port position (standard) R (common port) R (common port) (common port) ushion needle position (standard) ontact Reed Proximity Indicator color indicator type Without indicator light color indicator type color indicator type color indicator type color indicator type color indicator type (custom order) color indicator type Strong magnetic field proof (A magnetic field dedicated) Lead wire -wire -wire -wire -wire -wire -wire -wire

42 Option combination table : ombination possible : ombination not available Option AAAA YYL*N*HUlank R T S X A A A A Y Y L* N* H U lank R T S X Note : Some combinations are not available depending on bore size. onfirm the conditions of options of H "How to order" on the previous page. Note : L can not be used if port position is. (ø, ø) Option Port position and cushion needle position (standard) Height adjustment plate Table mounting thread size up Intermediate support bracket (L) Intermediate support bracket (00, L) Thin type floating joint loating joint Adjustable full-stroke bracket retrofitting Adjustable full-stroke L end only, with shock absorber Adjustable full-stroke R end only, with shock absorber Adjustable full-stroke both ends, with shock absorber Port position and cushion needle position (common port) Port position and cushion needle position Port position and cushion needle position Port position R and cushion needle position (common port) Port position, cushion needle position Port position R and cushion needle position (common port) -Q Series How to order SP* MK MA SA KV A/OV M SM JSK/M STR UA MRL MRG SM- A UA R 0

43 -Q Series SP* MK MA SA KV A/OV M SM JSK/M STR UA MRL MRG SM- A UA R How to order switch (Refer to pages 0 to 0 for parts configuration ) Switch body + mounting bracket (Note ) Only switch body SW Mounting bracket (Note ) M type switch Lead wire holder (Note ) M0H* Switch model no. (Page 0 section ) M0H* Switch model no. (Page 0 section ) M MH iscrete shock absorber model no. NK (Square nut pc., hex nut for fixing shock absorber pc.) Square nut for shock absorber for -0 is a special design. loating joint set model no. Y T type switch Note : Lead wire holder is not included in the switch and its mounting bracket. When a lead wire holder is necessary, place an order separately. Note : M type switch and T type switch has different brackets. Note : Lead wire holder comes in a set of 0 pieces. 0 (Page 0 section ) Applicable shock absorber model No. Model Shock absorber model no. - NK NK NK NK NK NK NK NK NK NK (Page 0 section ) *Lead wire length lank m (standard) m (option) m (option) "*" mark indicates length of lead wire. (Mount, mount base, pin, plain washer, pan head machine screw with spring washer) T iscrete intermediate support bracket model no. L L Adjustable full-stroke kit model no. Repair parts model no. -Q K Mounting bracket model no. A Mounting style (L and L) A ( set) (racket piece and mounting bolt pc.) (Page 0 section ) Height adjustment plate set model no. 0 L (Page 0 section ) (Page 0 section ) 0 (Page 0 section ) 0 (Page 0 section ) 0 U ( piece/ set) N ( piece/ set) 00 Stroke length (Page 0 section E ) 0 (Page 0 section ) (Plate and mounting bolt pc.) 0

44 Internal structure drawing and parts list (ø to ø) Parts list No. Parts name Material Remarks 8 Lock lever Hexagon socket head cap bolt Stopper Piston packing seal Adaptor Rod packing seal Position locking unit Lock pin (stopper piston) Repair parts list Tube (mm) ø ø ø0 ø Kit No. -Q-K-* -Q-K-* -Q-0K-* -Q-K-* Alloy steel Alloy steel Steel Nitrile rubber Steel Nitrile rubber Aluminum alloy Alloy steel Repair parts number hrome plating lackening Alumite hrome plating Note : Specify the kit no. when placing an order Specify stroke length for "*". Note :Parts no. for will be based accordingly to page 00. -Q Series Internal structure and parts list 8 0 No. Parts name Material Remarks 0 type snap ring for hole Gasket Rod cover Hexagon socket head cap bolt Hexagon socket head cap bolt Spring Square nut Steel Nitrile rubber Aluminum alloy Alloy steel Alloy steel Steel Alloy steel Alumite Electrodeposition coating lackening SP* MK MA SA KV A/OV M SM JSK/M STR UA MRL MRG SM- A UA R 0

45 -Q Series SP* MK MA SA KV A/OV M SM JSK/M STR UA MRL MRG SM- A UA R Internal structure drawing and parts list (ø to ø) Parts list No. Parts name Material Remarks No. Parts name Material Remarks 8 Hexagon socket head cap bolt Lock lever Wear ring Piston packing seal Spring Rod packing seal Lock pin Rod cover type snap ring for hole Alloy steel Alloy steel Polyacetal resin Nitrile rubber Steel Nitrile rubber Alloy steel Aluminum alloy Steel Electrodeposition coating hrome plating Alumite 0 Gasket Position locking unit Adaptor Hexagon socket head cap bolt Hexagon socket head cap bolt Hexagon socket head set screw Square nut Square nut Nitrile rubber Aluminum alloy Steel Alloy steel Alloy steel Alloy steel Steel Alloy steel Alumite Repair parts list Tube (mm) ø ø0 ø0 Kit No. -Q-K-* -Q-0K-* -Q-0K-* Repair parts number ( ) Note 8 0 ø -Q-K-* Note : Specify the kit no. when placing an order. Specify stroke length for "*". Note : Parts no. for will be based accordingly to page 00 and 00. Note : applies only to ø0 and ø0 equivalent models. 08

46 Internal structure drawing and parts list ( to ø00) Parts list No. Parts name Material Remarks No. Parts name Material Remarks 8 Hexagon socket head cap bolt Lock lever Wear ring Piston packing seal Spring Rod packing seal Lock pin Rod cover type snap ring for hole Alloy steel Alloy steel Polyacetal resin Nitrile rubber Steel Nitrile rubber Alloy steel Aluminum alloy Steel Electrodeposition coating hrome plating Alumite 0 8 Gasket Position locking unit Adaptor Hexagon socket head cap bolt Hexagon socket head cap bolt Hexagon socket head set screw Square nut Square nut onical spring washer Nitrile rubber Aluminum alloy Steel Alloy steel Alloy steel Alloy steel Steel Alloy steel Steel Alumite Repair parts list Tube (mm) ø00 Kit No. -Q-80K-* -Q-00K-* 8 0 Repair parts number Note : Specify the kit no. when placing an order Specify stroke length for "*". Note : Parts no. for will be based accordingly to page 0. -Q Series Internal structure and parts list 8 SP* MK MA SA KV A/OV M SM JSK/M STR UA MRL MRG SM- A UA R 0

47 -Q Series SP* MK MA SA KV A/OV M SM JSK/M STR UA MRL MRG SM- A UA R imensions (ø to ø) QJ -Q -Q with foot bracket -Q-L-**-*** (mm) ø ø ø0 ø J QA Q imensions (ø to ø) -Q QJ QK QA QA QQ Q QS QX L side -Q-L--***with foot bracket Note : Please refer to pages 0 to 0 for dimensions not shown below. Note : Refer to pages 08 to 0 for dimensions with options and dimensions of accessories. Q. Q.... QE 8 Q.... QG QH QJ 0 8. QK. QL. Note : Refer to pages 0, 0 for dimensions not shown below. Note : Refer to pages 08 to 0 for dimensions with options and dimensions of accessories. QP QM QG QL QN QQ QH QR L side Q Q Q QV QE QW Q QU S J R side J QE QL QK QH R side Q QG QN QM 8 8 QM QN QP -plug QP QQ M M 8 Rc /8 Rc /8. (mm) J QA Q QE Q QG QH QJ QK QL QM QN QP QQ QR QS QU QV QW QX S ø Rc / ø Rc / ø Rc / ø Rc /

48 imensions (, ø00) -Q QJ QK (mm) ø00 QA J 0 80 Q QS QA 0 Q 0 0 QM QN QX QP QH QG QL Q Note : Refer to pages 0, 0 for dimensions not shown below. Note : Refer to pages 08 to 0 for dimensions with options and dimensions of accessories. QR QE L side Q QG QH QJ QK 88 QL.. Q QM QV Q QN 0 0 QW QU QP Rc /8 Rc /8 J QE R side QR.. -Q Series ouble acting/position locking QS 8 8 QU QV 8 QW 0 0 QX 0 0 SP* MK MA SA KV A/OV M SM JSK/M STR UA MRL MRG SM- A UA R 0

49 SP* MK MA SA KV A/OV M SM JSK/M STR UA MRL MRG SM- A UA R Specifications escriptions mm Actuation Specifications fluid Max. working pressure MPa Min. working pressure MPa Withstanding pressure MPa Ambient temperature ylinder section Port size Position locking unit Stroke tolerance Working piston speed ushion Lubrication Position locking mechanism Holding force mm mm/s N -GQ ø ø ø0 ø ø ø0 ø0 ouble acting ompressed air 0. M M Allowable energy absorption (mm) ø ø ø0 ø ø ø0 ø0 ø ø to 0 Rc /8 Rc / Rc /8 Rc / (up to 000) 0 (up to 000) 0 (up to 000) 0 to 000 (standard port piping)(note ) Air cushion Not required (use turbine oil lass ISOVG if lubricated. Lubricate continuously if lubricated.) Installed on R side of cover. Maximum thrust x 0. ushioned No cushion Allowable energy absorption (J) ushion mm stroke (mm) Allowable energy absorption (J) Absorbed energy (J) Valid mm stroke (mm) ø With shock absorber (initial setpoint) M type switch quantity and min. stroke length (mm) Switch quantity Switch model no. (mm) ø ø ø0 ø ø ø0 ø0 ø ø00 T type switch quantity and min. stroke length (mm) Switch quantity Switch model no. (mm) ø ø ø0 ø ø ø0 ø0 ø ø00 M*V T*V M*H T*H double acting/position locking/resin guide -GQ Series ø: ø, ø, ø0, ø, ø ø0, ø0, ø,, ø00 JIS symbol M*V T*V 0 0 M*H T*H M*V T*V M*H T*H Rc / ø00 Stroke length (mm) ø ø ø0 ø ø ø0 ø0 ø ø00 Note : ()The speed of entry to the position locking mechanism must not exceed 00mm/s when operating at a speed of 00 to 000mm/s. or common port pipe, working piston speed varies depending on stroke length. onsult with K. ()Install an external shock absorber or a deceleration circuit etc. for deceleration. ()Apply grease to sliding section of lock lever periodically. Standard stroke length (mm) 00, 00 00, 00 00, , Max. stroke length (mm) 000 Min. stroke length (mm) ** The intermediate stroke can be manufactured in mm increments. M*V T*V 0 0 M*H T*H M*V T*V M*H T*H M*V T*V M*H T*H Always read safety precautions on With position locking function pages 00 to 00 before use.

50 Switch specifications (M type switch) () olor/ color indicator Proximity wire escriptions MWV MV and MH ( color indicator type) Applications PL Output method Power voltage Load voltage 0 to 0 V Load current to 0mA Light LE (ON lighting) Red/green LE (ON lighting) Leakage current ma or less escriptions Applications Power voltage Load voltage Load current Light Leakage current Switch specifications (T type switch) olor indicator type escriptions Applications Output method Power voltage Load voltage Load current Light Leakage current Strong magnetic field proof escriptions Applications Light Load voltage Load current Internal voltage drop Leakage current ylinder weight (mm) ø ø ø0 ø ø ø0 ø0 ø ø00 / V to 0mA M0V and M0H PL, relay 0 VA to 0mA LE (ON lighting) Without indicator light 0mA Note : or M0* switch, if load current is within to 0mA, this switch can be used with VA and 8 VA. Note : Refer to for other switch specifications. Proximity wire TYH/TYV TWH/TWV PL 0 to 0 V V ±0% to 0mA (Note ) Red/green LE (ON lighting) ma or less Proximity wire TY and TYT PL Red/green LE (ON lighting) V ±0% to 0mA V or less.0ma or less Weight when stroke length is 0mm asic type oot type Weight per switch (00) (L) (L) (Including bracket) Proximity wire MH/MV MPH/MPV (ustom order) MWV PL, relay, I circuit or small solenoid valve NPN output PNP output NPN output. to 8 V 0 to 8 V 0 V or less 00mA or less 00mA or less 0mA or less LE (ON lighting) Yellow LE (ON lighting) Red/green LE (ON lighting) 0µA or less 0.0mA or less 0µA or less Reed wire MV and MH PL, relay, I circuit (w/o lamp), serial connection Red/green LE (ON lighting) // V 0mA or less Red/green LE (ON lighting) Unit: kg Additional weight per St=00mm GQ Series Specifications 0µA or less 0 VA or less 0mA or less Proximity wire TYH/TYV TWH/TWV PL, relay NPN output NPN output 0 to 8 V 0 V or less 0mA or less Red/green LE (ON lighting) SP* MK MA SA KV A/OV M SM JSK/M STR UA MRL MRG SM- A UA R 0

51 -GQ Series SP* MK MA SA KV A/OV M SM JSK/M STR UA MRL MRG SM- A UA R How to order Without switch -GQ With switch -GQ 00 A Mounting style Note ushion Note on model no. selection Note : If Option "R" and "T" is selected for bore size,, 0,, or 0, the support type will be "00" or "L" ("L" can not be piped for options "R" and "T", thus unavailable. ) Note : Refer to page 0 for minimal stroke with models <Example of model number> -GQ M0H-R- 00 M0H R E Stroke length with switches. Note : Switches not listed on this page are also available. (custom order) Refer to for details. Note : Adjustable full-stroke bracket on the R side is as standard part of position locking. When A is indicated, a shock absorber is only added to R side. If A is indicated, position locking, adjustable full stroke and shock absorber will be on the R side. (The following diagram) -Q -Q: A Note : The asterisk (*) following L* and N* indicates the number of brakets. Indicate "L" for L and "N" for L when ordering sets. pieces/ set Note : Refer to dimensions on page 0 to 0for port and cushion needle position symbols. Note : Standard ø models needs to have its cover removed and full stroke adjustment mounted using a plate nut afterwards. "A" is a option that will have a plate nut for mounting installed beforehand so that it can be mounted afterwards without removing the cover. Note 8: Thread size for ø, ø will be "M" and ø0 will be "M" if "H" is selected. Note : heck the available combination of options on the "Option combination table" on the next page. Note 0: opper and PTE free as standard Model: Resin guide type with position locking function A Mounting style : asic type : ømm Port thread type : R screw ushion : oth sides cushioned E Stroke length : 00mm Switch model no. : Reed switch M0H and lead wire m G Switch quantity : on rod end H Option : Port position, cushion needle position Port thread type -Q: A both sides -Q: A Switch model no. Note G Switch quantity H Option Note, Note Note, Note Note 8 A Mounting style 00 asic type L Axial foot type L Axial foot type (mm) ø ø ø0 ø ø ø0 ø0 ø ø00 Switch model no. Lead wire Lead wire Axial Radial M0H* M0V* MH* MV* MH* MV* MWV* MH* MV* MWV* MPH* MPV* TWH* TWV* TYH* TYV* TWH* TWV* TYH* TYV* TY* TYT* *Lead wire length lank m (standard) m (option) m (option) G Switch quantity R L T H A A A A L* N* H U lank R T S X escriptions Port thread type lank Rc thread N NPT thread (ø0 and over) (custom order) G G thread (ø0 and over) (custom order) ushion oth sides cushioned R R side cushioned L L side cushioned N No cushion E Stroke length (mm) ø to ø00 ontact Reed Proximity Indicator Lead wire color indicator type Without indicator light -wire color indicator type color indicator type -wire color indicator type color indicator type -wire color indicator type (custom order) -wire color indicator type -wire -wire Strong magnetic field proof (A magnetic field dedicated) -wire One on R side One on L side pieces (fill in switch quantity if or more switches are required.) Option Stroke length Note to 000 (ø) Adjustable full-stroke both ends, with shock absorber Adjustable full-stroke R end only, with shock absorber Adjustable full-stroke L end only, with shock absorber Adjustable full-stroke bracket retrofitting Intermediate support bracket (00, L) With intermediate support bracket (L) Table mounting thread size up Height adjustment plate Port position (standard) R (common port) R (common port) (common port) ushion needle position (standard) ustom stroke length y mm increment

52 Option combination table : ombination available : ombination not available Option A A A A L* N* H U lank R T S X Option Port position, cushion needle position (common port) Port position, cushion needle position Port position, cushion needle position Port position R, cushion needle position (common port) Port position, cushion needle position Port position R, cushion needle position (common port) Port position, cushion needle position (standard) Height adjustment plate Table mounting thread size up Intermediate support bracket (L) Intermediate support bracket (00, L) Adjustable full-stroke bracket retrofitting Adjustable full-stroke L end only, with shock absorber Adjustable full-stroke R end only, with shock absorber Adjustable full-stroke both sides and shock absorbers A AAA L* N* H U lank R T S X Note : Some combinations are not available depending on bore size. onfirm the conditions of options of on the previous page. Note : L can not be used if port position is. (ø, ø) H -GQ Series How to order "How to order" SP* MK MA SA KV A/OV M SM JSK/M STR UA MRL MRG SM- A UA R 0

53 -GQ Series SP* MK MA SA KV A/OV M SM JSK/M STR UA MRL MRG SM- A UA R How to order switch (Refer to page 0 to 0 for parts configuration ) Switch body + mounting bracket (Note ) Only switch body SW M0H* Switch model no. (Page 0 section ) M0H* Switch model no. (Page 0 section ) Mounting bracket (Note ) M type switch Lead wire holder (Note ) M MH iscrete shock absorber model no. NK (Square nut pc., hex nut for fixing shock absorber pc.) Square nut for shock absorber for -0 is a special design. T type switch T Note: M type switch bracket different from T type switch. Note : Lead wire holder is not included in the switch and its mounting bracket. When a lead wire holder is necessary, place an order separately. Note : M type switch and T type switch has different brackets. Note : Lead wire holder comes in a set of 0 pieces. 0 (Page 0 section ) Applicable shock absorber model No. Model Shock absorber model no. - NK NK NK NK NK NK NK NK NK NK-00-0 *Lead wire length lank m (standard) m (option) m (option) "*" mark indicates length of lead wire. iscrete intermediate support bracket model no. L L Adjustable full-stroke kit model no. Repair parts model no. -GQ K Mounting bracket model no. 0 L (Page 0 section ) (Page 0 section ) 0 (Page 0 section ) 0 (Page 0 section ) A Mounting style (L and L) ( piece/ set) N ( piece/ set) A ( set) 00 Stroke length (Page 0 section E ) 0 (racket piece and mounting bolt pc.) (Page 0 section ) Height adjustment plate set model no. 0 U 0 (Page 0 section ) (Plate and mounting bolt pc.)

54 Internal structure and parts list Repair parts list Tube (mm) ø ø ø0 ø ø ø0 ø0 ø ø00 imensions Kit No. -GQ-K-* -GQ-K-* -GQ-0K-* -GQ-K-* -GQ-K-* -GQ-0K-* -GQ-0K-* -GQ-K-* -GQ-80K-* -GQ-00K-* Refer to the following for internal structure and parts list Series: 00 to 0 -G Series: 0 to 0 -Q Series : 0 to (ased on parts no. on page 00 ) 8 8 (ased on parts no. on page 00 ) 8 8 (ased on parts no. on page 00 ) (ased on parts no. on page 0 ) Series pages 0 to 0 -G Series pages 0 to 0 -Q Series pages 00 to 0 Repair parts number 0 (ased on parts no. on page 0 ) 0 (ased on parts no. on page 08 ) 0 (ased on parts no. on page 08 ) 0 (ased on parts no. on page 0 ) -GQ Series (ased on parts no. on page 0 ) (ased on parts no. on page 0 ) (ased on parts no. on page 0 ) (ased on parts no. on page 0 ) Parts list SP* MK MA SA KV A/OV M SM JSK/M STR UA MRL MRG SM- A UA R 0

55 Series SP* MK MA SA KV A/OV M SM JSK/M STR UA MRL MRG SM- A UA R series common dimensions: Options (ø to ø) Adjustable full-stroke with shock absorber () SR (mm) ø ø ø0 ø SK SM Nut width across flats ST SH SE S 0 SG L side S SJ S M8 x 0. M8 x 0. M0 x.0 M x.0 L + stroke length SG SH S S SE S SJ SK SM SN SP SQ SR ST L MAX MIN Adjustment Maximum energy absorption depth Screw diameter J M M M M S SJ 8 S 0 R side SG SQ SN Nut width across flats SP 08

56 series common dimensions: Options (ø to ø) Adjustable full-stroke with shock absorber () (mm) ø ø0 ø0 ø 8 8 SM Nut width across flats SK SG SR ST SH S S SE S 80 L side SJ M x. M0 x. M x. M x L + stroke length SG SH S S SE S SJ SK SM SN SP SQ SR ST L Maximum energy absorption MAX MIN Adjustment depth Screw diameter J 8 8 M8. 8 M0. M. M S S SP SJ Series Series option dimensions SG 0 SQ SN Nut width across flats R side 8 8 SP* MK MA SA KV A/OV M SM JSK/M STR UA MRL MRG SM- A UA R 0

57 Series SP* MK MA SA KV A/OV M SM JSK/M STR UA MRL MRG SM- A UA R series common dimensions: Options ( to ø00) Adjustable full-stroke with shock absorber (mm) ø00 SM Nut width across flats SK SR ST SH SG S S 0 0 SE S L side SG SH S S SE S SK SM SN SP SQ SR ST L MAX MIN Adjustment Maximum energy absorption depth Screw diameter J M x. M x L + stroke length 0 M0 0 M0 0 S S SG SQ R side SN Nut width across flats SP 00

58 series common dimensions: Options GK (moving range) M min. K (moving range) m min. Port size ø ø ø0 ø ø ø0 ø0 ø Thin floating joint (Y) ø to ø. H H V A E H J K K GK M min. m min.n min. n min. P p R S V Y y T U Height adjustment plate (U) Material: Aluminum alloy Y N min. P V (Hook installed outwards) V y n min. p A V (Hook installed inwards) J J K (moving range) K (moving range) A E R G ø T E.. 0 H S T Shaft Material: Stainless steel U Hook Material: Steel Series Series option dimensions Mount base () Material: Steel ø. ø. ø. ø. ø. ø. ø ø Hook Material: Steel ø. spot face depth. ø. spot face depth. ø8 spot face depth. ø. spot face depth. ø spot face depth. ø spot face depth. ø spot face depth 8. ø spot face depth 8. Port size A E G H ø M penetrating 8 ø M penetrating ø M penetrating ø M penetrating 0. ø M penetrating 0. ø M penetrating. ø M8 penetrating 8 ø M8 penetrating M penetrating 8 ø M penetrating 8 SP* MK MA SA KV A/OV M SM JSK/M STR UA MRL MRG SM- A UA R 0

59 Series SP* MK MA SA KV A/OV M SM JSK/M STR UA MRL MRG SM- A UA R series common dimensions: Options loating joint (Y) material: Steel (mm) ø ø ø0 ø ø A E L* (L) A G Moving range (single) J K K H I... A J Intermediate support bracket (L*N*) material: Aluminum alloy (This bracket is for preventing deflection ) (mm) ø ø ø0 ø ø ø ø0 ø ø L* (for L) N* (for L) A E G H J mount bracket () material: Aluminum alloy E K L K J H E (mm) ø0 ø0 ø ø00 -øi A N* (L) øh 0 0. G E G E J R Q G H 8 8 I -S J 0 0 K N M P (mm) ø ø ø0 ø J 8 0 K L M N P Q R S M M M M (mm) ø ø0 ø0 ø J K L M N P Q R S M M M8 0 8 M8 0

60 Switch Switch body + mounting bracket (Note ) No. Switch M0H* Switch model no. (Page 00 section ) Lead wire holder Part name Plastic bag Label Switch bracket ross headed pan Switch MH Quantity Switch body No. SW M0H* Switch model no. (Page 00 section ) Part name Plastic bag Label Switch mount bracket mount bracket 0 (Page 00 section ) mount bracket + mounting bolt pc. Quantity racket racket No. M T Part name Plastic bag Label Switch bracket ross headed pan Series onfigurations table Quantity SP* MK MA SA KV A/OV M SM JSK/M STR UA MRL MRG SM- A UA R No. Part name Lead wire holder Plastic bag Package label (S) Quantity 0 Note: Packaging may slightly differ depending on the size. No. Part name Package label (S) Plastic bag Hexagon socket head cap bolt mount Air mat Quantity 0

61 SP* MK MA SA KV A/OV M SM JSK/M STR UA MRL MRG SM- A UA R Series onfigurations table 0 Repair parts Adjustable full-stroke kit Adjustable full-stroke kit 0 A No. 8 0 set Part name Plastic bag Package label (S) Square nut Shock absorber Hexagon socket head cap bolt Hexagon socket head set screw Plate Adaptor (R) Adaptor (L) Square nut Square nut Hexagon socket head cap bolt Quantity No. 8 0 Note: Packaging may slightly differ depending on the size. Part name Piston packing seal O ring P ushion packing seal ust wiper Plastic bag Seal belt Air mat ust-proof belt Plastic bag Package label (L) Instruction manual for repair parts replacement O ring special ushion ring gasket Needle gasket ardboard box No. Quantity Note : ushion ring gasket not included for ø to ø0 Note : gaskets will be added for to ø00 Product name Package label (S) Adaptor Air mat Plastic bag Shock absorber Hexagon socket head set screw Mounting bracket Repair parts Mounting bracket A Mounting style 0 K 00 (L.L) 0 racket piece + mounting bolt pc. Stroke length (Page 00 section ) (Page 00 section ) (Page 00 section E ) 8 0 (Page 00 section ) (ø to ø) 8 0 (ø to ø) 8 0 No. No. (, ø00) etailed drawing Quantity No. 8 0 Part name Plastic bag Package label (S) Hexagon socket head cap bolt oot bracket (A) Part name Plastic bag Package label (S) Hexagon socket head cap bolt oot bracket () 8 0 Product name Square nut Square nut Square nut Hexagon socket head cap bolt elleville spring Quantity Quantity etailed drawing Quantity

62 loating joint set loating joint set L Intermediate support bracket 0 Y 0 L piece/ No. (Page 00 section ) Part name Mount Mount base Pin Pan head machine screw with spring washer Mounting bolt Quantity Note: Packaging may slightly differ depending on the size. No. L No. (Page 00 section ) Part name Package label (S) Plastic bag Intermediate support bracket (Page 00 section ) Part name Package label (S) Plastic bag Intermediate support bracket Plate set N piece/ set Quantity Quantity Series onfigurations table SP* MK MA SA KV A/OV M SM JSK/M STR UA MRL MRG SM- A UA R 0

63 0 MEMO SP* MK MA SA KV A/OV M SM JSK/M STR UA MRL MRG SM- A UA R

64 -J Series ull coweling type (with dust cover) esigned for tough conditions. Overview A new option with powerful dust-proof properties has been added to the rodless cylinder Series. y mounting an original metal cover on the standard type, the product can be used safely without direct contact from spatter, metal chips, coolant or cutting lubricants. y mounting an original metal cover on the standard type, the product can be used safely without direct contact from spatter, metal chips, coolant, or cutting lubricants Applications Areas exposed to coolant and cutting fluid from machines etc Areas exposed to metal dust generated by metal processing machines. Areas exposed to spatters caused by welding machines Where cleanliness is required, such as in food processing plants Other poor environment requiring dust proofing (ø to ø) Resistant to direct contact with spatter, metal dust and coolants. ust proof aluminum cover Provides extra protection for seal belt with dust proof belt. Table adaptor PAT. PEN eatures Industry's first rodless type with dust proof cover ust proof model with same mounting dimensions and overall length as standard models Aluminum cover resistant to spatter adhesion Remove cover from top using only a wrench Sleek design with side cover on both ends sizes from ø to ø available Side cover SP* MK MA SA KV A/OV M SM JSK/M STR UA MRL MRG SM- A UA R over ylinder body L-J racket over bracket with mounting holes compatible with standard SRL-L ylinder body Side cover Table adaptor Workpiece mounting dimensions are compatible with standard. 0

65 SP* MK MA SA KV A/OV M SM JSK/M STR UA MRL MRG SM- A UA R 08 Specifications escriptions mm ø ø -J ø0 ø0 ø Actuation Working fluid ouble acting ompressed air Max. working pressure MPa 0. Min. working pressure MPa Withstanding pressure MPa Ambient temperature.0 to 0 Port size Rc/8 Rc/ Rc/8 Stroke tolerance mm (to 000), 0 (to 000) Working piston speed mm/s ushion Lubrication 0 to 000 (standard port piping) (note ) Air cushion Not required (Use turbine oil lass ISO VG if lubricated. Lubricate continuously if lubricated.) Note : Piston speed used with common port piping differs with the stroke. ontact K for details. Allowable energy absorption (mm) ø ø ø0 ø0 ø Stroke Equivalent bore size ushioned No cushion With shock absorber (initial setpoint) Allowable energy absorption (J) ushion mm stroke (mm) Allowable energy absorption (J) Absorbed energy (J) Valid mm stroke (mm) Standard stroke length (mm) Max. stroke length (mm) 00, 00, 00, ø, ø, ø0, 00, 00, 00, 000 ø0, ø 800, 0, 000 Note : Intermediate strokes can be manufactured in mm increments. M type switch quantity and min. stroke length (mm) Switch quantity Switch model no. (mm) ø ø ø0 ø0 ø M*V M*H M*V M*H Note: The minimal stroke for full stroke adjustment models with switches are shown in ( ). T type switch quantity and min. stroke length (mm) Switch quantity Switch model no. (mm) ø ø ø0 ø0 ø T*V Note: The minimal stroke for full stroke adjustment models with switches are shown in ( ). T*H double acting/full cowling type -J Series : ø ø ø0 ø0 ø T*V (0) T*H 0 (0) M*V T*V M*H (0) T*H 00 (0) Min. stroke length(mm) M*V T*V M*H (0) T*H 0 (0) M*V T*V M*H 80 (0) T*H 00 (0) M*V T*V M*H (0) T*H 0 (0)

66 Switch specifications (M type switch) color/ color indicator escriptions Proximity wire Proximity wire MV, MH MWV ( color indicator type) MH/MV MPH/MPV (custom order) Applications PL Output method NPN output PNP output Power voltage. to 8 V Load voltage 0 to 0 V 0 V or less Load current to 0mA 00mA or less 00mA or less Light LE (ON lighting) Red/green LE (ON lighting) Leakage current ma or less Reed wire escriptions MOV, MOH MV and MH Applications PL, relay Power voltage Load voltage / V 0 VA // V Load current to 0mA to 0mA 0mA or less Light LE (ON lighting) Without indicator light Leakage current 0mA Note : or MO* switch, if load current is within to 0mA, this switch can be used with VA and 8 VA. Note : Refer to for other switch specifications. Switch specifications (T type switch) olor indicator type escriptions Applications Output method Power voltage Load voltage Load current Light Leakage current Strong magnetic field proof escriptions Applications Light Load voltage Load current Internal voltage drop Leakage current ylinder weight escriptions ø ø ø0 ø0 ø Proximity wire TYH/TYV TWH/TWV PL to 0 V V ±0% to 0mA (Note ) Red/green LE (ON lighting) ma or less Proximity wire TY and TYT PL Red/green LE (ON lighting) V ±0% to 0mA V or less.0ma or less MWV PL, relay, I circuit or small solenoid valve -J Series Specifications NPN output 0 to 8 V 0mA or less LE (ON lighting) Yellow LE (ON lighting) Red/green LE (ON lighting) 0µA or less 0.0mA or less 0µA or less Red/green LE (ON lighting) oolant proof escriptions Applications Power voltage Load voltage and current urrent consumption Internal voltage drop Leakage current Light Weight when stroke length is 0mm asic type Weight per switch (including bracket) PL, relay, I circuit (w/o lamp), serial connection Red/green LE (ON lighting) 0µA or less 0 VA 0mA or less Proximity wire TYH/TYV TWH/TWV PL, relay NPN output NPN output 0 to 8 V 0 V or less 0mA or less Proximity wire Red/green LE (ON lighting) Proximity wire TYLH and TYLV TYLH and TYLV PL PL, relay 0 to 8 V 0 to 0 V to 0mA 0 V 0mA or less or less 0mA or less with V (when turned ON) V or less 0.V or less ma or less 0µA or less Red/green LE (ON lighting) Additional weight per stroke of 00mm (kg) SP* MK MA SA KV A/OV M SM JSK/M STR UA MRL MRG SM- A UA R 0

67 -J Series SP* MK MA SA KV A/OV M SM JSK/M STR UA MRL MRG SM- A UA R How to order Without switch -J With switch -J A Mounting style M0H R Port thread type ushion Note on model no. selection <Example of model number> -J M0H-R- A A E G H E Stroke length Note : Refer to page 08 for minimal stroke for models with switches. Note : Switches not listed on option are also available. (custom order) Refer to for details. Note : Standard ø models needs to have its cover removed and full stroke adjustment mounted using a plate nut afterwards. "A" is a option that will have a plate nut for mounting installed beforehand so that it can be mounted afterwards without removing the cover. Note : The asterisk (*) following L* and N* indicates the number of brackets. Indicate "L" for 00 and "N" for LJ when ordering sets. Note : Refer to dimensions on page 0 to 0for port and cushion needle position symbols. Note : We recommend the use of the extension fitting included in the package when mounting speed control valves and piping fittings. Note : Remove the side cover when using the common piping port on the R side. Note 8: ommon port (port position R) for ø and ø are available only when bracket LJ is selected. Not available for mounting style 00. Mounting style : asic type : ømm or equivalent Port thread type : Rc thread ushion : oth sides cushioned Stroke length : 00mm Switch model no. : Reed MOH Switch quantity : One on R side Option : Port position, cushion needle position Switch model no. Note G Switch quantity H Option Accessory Note, Note Note A Mounting style 00 LJ 0 0 R L N E TYLH* TYLV* *Lead wire length lank m (standard) m (option) m (option) G Switch quantity H R L T A A A A Y L* N* lank R T S escriptions (ø) asic type note Axial foot type (common porting) ø ø ø0 ø0 ø Port thread type Rc thread NPT thread (ø0 and over) (custom order) G thread (ø0 and over) (custom order) lank N G ushion oth sides cushioned R side cushioned L side cushioned No cushion Stroke length (mm) ø to ø Switch model no. Lead wire Axial M0H* MH* MH* MH* MPH* TWH* TYH* TWH* TYH* TY* TYT* TYLH* One on R side One on L side pieces pieces pieces (fill in quantity for or more) Option and accessory (ø) Adjustable full-stroke both ends, with shock absorber Adjustable full-stroke R end only, with shock absorber Adjustable full-stroke L end only, with shock absorber Adjustable full-stroke bracket retrofitting loating joint Intermediate support bracket (00) With intermediate support bracket (LJ) Port position (standard) R (common port) R (common port) Stroke length Note to 000 Lead wire Radial M0V* MV* MV* MWV* MV* MWV* MPV* TWV* TYV* TWV* TYV* - - TYLV* ushion needle position ontact Reed Proximity (standard) note, note 8 note, note ustom stroke length y mm increment Indicator color indicator type Without indicator light color indicator type color indicator type color indicator type color indicator type color indicator type (custom order) color indicator type Strong magnetic field proof (A magnetic field dedicated) utting oil switch Lead Line -wire -wire -wire -wire -wire -wire -wire -wire -wire

68 How to order switch Switch body + mounting bracket (Note ) Only switch body SW M0H* M0H* Applicable shock absorber model No. loating joint set model no. 0 Y 00 Model no. -J- -J- -J-0 -J-0/ Switch model no. (Previous page section ) iscrete shock absorber model no. 0 NK Applicable shock absorber NK-00-. NK-00-. NK-00- NK-00- (Mount, mount base, pin, plain washer, pan head machine screw with spring washer or mounting bolts) iscrete intermediate support bracket model no. LJ (Previous page section ) (Square nut pc., hex nut for fixing shock absorber pc.) Square nut for shock absorber for -0 is a special design. (Previous page section ) (Refer to page 0 for parts configuration ) Mounting bracket (Note ) M T Lead wire holder (Note ) MH Note : Lead wire holder is not included in the switch and its mounting bracket. When a lead wire holder is necessary, place an order separately. Note : M type switch and T type switch has different brackets. Note. Lead wire holder comes in a set of 0 pieces. ( piece/ set) -J Mounting style LJ 0 0 N ( piece/ set) L (Previous page section ) (Previous page section ) over kit model no. -J 0 Adaptor kit model no. -J 0 Repair parts model no K 00 Adjustable full-stroke kit model no. -J 0 A Refer to a 0 page for the configurations table. Mounting bracket model no. ( set) (racket piece and mounting bolt pc.) (Previous page section ) -J Series How to order OVER KIT Stroke length (Previous page section ) (Previous page section E ) (Previous page section ) AAPTOR-KIT Stroke length (Previous page section ) (Previous page section E ) Refer to page 00 to 00 for details of repair parts. (Previous page section ) SP* MK MA SA KV A/OV M SM JSK/M STR UA MRL MRG SM- A UA R 0

69 -J Series SP* MK MA SA KV A/OV M SM JSK/M STR UA MRL MRG SM- A UA R Internal structure and parts list (ø) Through hole for tools (Note ) 000 mm stroke and over 0 8 Note : Remove the cover and use this hole to tighten with a hex wrench when mounting this product. Note : When shipping, extension fittings (two pcs.) are attached. Parts list escriptions Parts name Material Remarks escriptions Parts name Material aution plate (o not step) Hexagon socket head cap bolt Hexagon socket head cap bolt Polypropylene Stainless steel Stainless steel 8 ody Hexagon socket head cap bolt Table adaptor Alloy steel Aluminum alloy over aution plate (pinch caution) L-J bracket Aluminum alloy Polypropylene Aluminum alloy Alumite Alumite 0 Table plate Side cover Table spacer Aluminum alloy Aluminum alloy Polyacetal resin Remarks Alumite Alumite Alumite 0 Refer to pages 00 to 00 for internal structure and consumed parts because they are common with standard series.

70 Internal structure and parts list (ø to ) 8 -J Series Internal structure and parts list Through hole for tools (Note ) 000 mm stroke and over 0 Note : Remove the cover and use this hole to tighten with a hex wrench when mounting this product. Note : When shipping, extension fittings (two pcs.) are attached. SP* MK MA SA KV A/OV M SM JSK/M STR UA MRL MRG SM- A UA R Parts list escriptions Parts name Material Remarks escriptions Parts name Material aution plate (o not step) Hexagon socket head cap bolt Hexagon socket head cap bolt over aution plate (pinch caution) L-J bracket ody Polypropylene Stainless steel Stainless steel Aluminum alloy Polypropylene Aluminum alloy Alumite Alumite 8 0 Hexagon socket head cap bolt Table adaptor Hall plug Table plate Side cover Table spacer Alloy steel Aluminum alloy Polyamide Aluminum alloy Aluminum alloy Polyacetal resin Refer to pages 00 to 00 for internal structure and consumed parts because they are common with standard series. Remarks Alumite Alumite Alumite 0

71 -J Series SP* MK MA SA KV A/OV M SM JSK/M STR UA MRL MRG SM- A UA R Internal structure and parts list: with adjustable full-stroke shock absorber (ø) Note : When shipping, extension fittings (two pcs.) are attached. escriptions Parts name Material Remarks escriptions Parts name Material 8 0 aution plate (o not step) Hexagon socket head cap bolt Hexagon socket head cap bolt Square nut Square nut Shock absorber Hexagon socket head set screw Hexagon socket head cap bolt over aution plate (pinch caution) Plate Polypropylene Stainless steel Alloy steel Steel Steel Alloy steel Stainless steel Aluminum alloy Polypropylene Aluminum alloy Alumite Alumite 8 0 L-J bracket Square nut Adaptor (R) ody Adaptor (L) Hexagon socket head cap bolt Hexagon socket head cap bolt Table adaptor Table plate Side cover Table spacer Aluminum alloy Alloy steel Steel Steel Alloy steel Alloy steel Aluminum alloy Aluminum alloy Aluminum alloy Polyacetal resin 000 mm stroke and over Remarks Alumite lackening Alumite Alumite Alumite 0

72 -J Series Internal structure and parts list Internal structure and parts list: with adjustable full-stroke shock absorber (ø to ) Note : When shipping, extension fittings (two pcs.) are attached. escriptions Parts name Material Remarks escriptions Parts name Material 8 0 aution plate (o not step) Hexagon socket head cap bolt Hexagon socket head cap bolt Square nut Shock absorber Square nut Hexagon socket head set screw Hexagon socket head cap bolt over aution plate (pinch caution) Polypropylene Stainless steel Alloy steel Steel Steel Alloy steel Stainless steel Aluminum alloy Polypropylene Alumite 8 Adaptor L-J bracket Square nut ody Hexagon socket head cap bolt Table adaptor Table plate Side cover Table spacer Steel Aluminum alloy Steel Alloy steel Aluminum alloy Aluminum alloy Aluminum alloy Polyacetal resin 000 mm stroke and over Remarks Alumite Alumite Alumite Alumite SP* MK MA SA KV A/OV M SM JSK/M STR UA MRL MRG SM- A UA R 0

73 -J Series SP* MK MA SA KV A/OV M SM JSK/M STR UA MRL MRG SM- A UA R imensions (ø) A H ø Y T L side -øk P N E EA -L A G -M J Z + stroke length Q + stroke length R + stroke length E EA N P V R side J Note : When shipping, extension fittings (two pcs.) are attached. (mm) A A E EA G H J K L M -J M depth M penetrating (mm) N P Q R S T U V W X Y Z -J- 08 Note) -J has the same mounting dimensions as -L (page 0, 0) 0. 0 S R U X W (L-J bracket section) (cover bottom surface) common 0

74 imensions ø (with switch) -J-**-**-***-M*H* with cylinder switch (axial lead wire) PP -J-**-**-***-M*V* with cylinder switch (radial lead wire) PP -J-**-**-***-T*H*(T*W, T*Y, T*YL, T*Y) with cylinder switch (axial lead wire) PA PP -J-**-**-***-T*V(T*W, T*Y, T*YL) with cylinder switch (radial lead wire) H H H.. P -J Series ouble acting/full cowling type R R H SP* MK MA SA KV A/OV M SM JSK/M STR UA MRL MRG SM- A UA R (mm) ø PA PP H P With switch H R M* T*Y* T*W M* T*Y* T*W PA P PP T*Y* TY T*W* M*V M*H T*YV T*YH TY T*WV T*WH H 0

75 -J Series SP* imensions MK MA ø to SA KV A A/OV M H H SM JSK/M H E G -M E H S U H H HA Y T -øk L side -øk P EA N -L J Z + stroke length Q + stroke length R + stroke length EA N P R side V J R Note X W (L-J bracket section) (cover bottom surface) common STR UA Note : When shipping, extension fittings (two pcs.) are attached. Note : The R port position is not available for the ø mounting type 00. MRL MRG SM- A UA R (mm) -J- -J-0 -J-0 -J- (mm) -J- -J-0 A 0 0 L M depth M8 depth 0 0 M 8 8 M penetrating M penetrating E N EA 8 P Q G R 8 8 H S 8 HA T 8 H 0 U H V 8.. J. 8 W K X 8 K spot face depth 8. spot face depth 8.. spot face depth 0.8 Y 8. Z 0 -J-0 M8 depth M8 penetrating J- M0 depth M8 penetrating Note: -J has the same mounting dimensions as -L (Page 0, 0) 08

76 imensions ø to (with switch) -J-**-**-***-M*H* with cylinder switch (axial lead wire) -J-**-**-***-M*V* with cylinder switch (radial lead wire) -J-**-**-***-T*H*(T*W, T*Y, T*YL, T*Y) with cylinder switch (axial lead wire) -J-**-**-***-T*V(T*W, T*Y, T*YL) with cylinder switch (radial lead wire) (mm) ø ø0 ø0 ø PP H. R PP H. H PA H P R PP PA PP With switch H R M* T*Y* T*W M* T*Y* T*W PA P PP T*Y* TY T*W* M*V M*H T*YV T*YH H P H J Series ouble acting/full cowling type TY T*WV T*WH SP* MK MA SA KV A/OV M SM JSK/M STR UA MRL MRG SM- A UA R 0

77 -J Series SP* MK MA SA KV A/OV M SM JSK/M STR UA MRL MRG SM- A UA R imensions: with adjustable full-stroke shock absorber (ø) H Y T -øk L side P (mm) -J--A (mm) -J--A N E EA A -L 00 0 L A M M depth M penetrating N Note: -J has the same mounting dimensions as -L (Page 0, 0) A G -M 8 P J Z + stroke length Q + stroke length R + stroke length 8 Q 08 E 8. R EA S A 0 T 0 EA E N HA P H V R side J Note : When shipping, extension fittings (two pcs.) are attached. G 0 U H. V. HA. W 0 H 0 X J Y R S U X K Z W (L-J bracket section) (cover bottom surface) common 00

78 -J Series ouble acting/full cowling type imensions: with adjustable full-stroke shock absorber (ø to ) H HA Y T H (mm) -J--A -J-0-A -J-0-A -J--A (mm) -J--A -J-0-A -J-0-A -J--A -øk -øk H E EA P N L side A 0 0 N A P Q 80 -L 0 0 R Note: -J has the same mounting dimensions as -L (Page 0, 0) A G 8 8 S E T M Z + stroke length Q + stroke length R + stroke length EA 8 U V 8.. G W 0 H X 8 0 A E H H EA N P R side V J S U H Note : When shipping, extension fittings (two pcs.) are attached. HA Y 8. 8 H 0 Z 0 8 AX 8 J. 8 K R K X W (L-J bracket section) (ottom of cover) M depth M penetrating spot face depth 8. M8 depth M penetrating spot face depth 8. M8 depth M8 penetrating. spot face depth 0.8 M0 depth M8 penetrating L M SP* MK MA SA KV A/OV M SM JSK/M STR UA MRL MRG SM- A UA R 0

79 -J Series SP* MK MA SA KV A/OV M SM JSK/M STR UA MRL MRG SM- A UA R imensions: Mounting style (L J) (ø) A + stroke length L + stroke length imensions: Mounting style (L J) (ø) (mm) -ø R E A E L -J-LJ--A *Standard models and adjustable full-stroke shock absorber models (A*) has the same dimensions. - R A + stroke length E L + stroke length 0 (mm) A E L -J-LJ--A *Standard models and adjustable full-stroke shock absorber models (A*) has the same dimensions.

80 imensions: extension fitting Adjustable full-stroke kit configurations table Adjustable full-stroke kit -J <ø> A R A A -J-P0 -J-P0 -J-P0 No A Parts list H R R Rc/8 Rc/ Rc/8 0 Plastic bag Package label (S) Square nut Shock absorber Hexagon socket head cap bolt Hexagon socket head set screw Plate Adaptor (R) Adaptor (L) Square nut Square nut Hexagon socket head cap bolt H (Page 00 section ) A Quantity set over kit configurations table 0 -J <ø to > No No Parts list 00 Stroke length (Page 00 section ) (Page 00 section ) Package label (S) Adaptor Air mat Plastic bag Shock absorber Hexagon socket head set screw Square nut Square nut Square nut Hexagon socket head cap bolt -J Series Other dimensions OVER KIT Parts list Hexagon socket head cap bolt Hexagon socket head cap bolt Hexagon socket head cap bolt Hexagon socket head cap bolt Extension joint Hall plug Side cover Table plate L-J bracket Table adaptor over etailed drawing Quantity Quantity 0 SP* MK MA SA KV A/OV M SM JSK/M STR UA MRL MRG SM- A UA R