Attachments. T Type Interface: (T) M5 X 0.8, 1/ 8, 1/ 4, 3/ 8, 1/ 2 Makes it easy to diverge air out with T type interface
|
|
- Luke Norton
- 5 years ago
- Views:
Transcription
1 ttachments Piping dapter M X 0.8, / 8, /, / 8, /, /, asy maintenance. Makes it possible to attach and detach equipment without removing piping. -0 Piping adapter To order piping adapter with bracket, the parts number as shown below. (xample) With L type bracket: 0L- With T type bracket: 0T- One with installed is special product. pplicable model 0-M M X / 8-0 / - 0 / 8-0 / - 0 / / / 0-0 / / 0-06 / / / , W , R000, , R00, W00 000, M00, 00. 0, 0 00, R00, W , M00, , R000, W000 L000, M000, , R000-06, W L000-06, M000-06, , 00, ,, , R000, L , R6000, L6000 Note ) in part number indicates thread type. Use nothing for Rc(PT), N for NPT and for (P). T Type Interface: (T) M X 0.8, / 8, /, / 8, / Makes it easy to diverge air out with T type interface. Y-M Y-0, 0 Y-0, 0 Y-0, 0 Y-0, 0 Y-0, 0 Y T type interface ile S000, #9 S00, #9 S0, #9 S000, #9 S006, #9 S000, #9 Y aution on ssembling T type interface T type interface cannot be mounted at IN/OUT side of W or upward handle of R. When T type interface is used at IN side of lubricator, oil may have entered. Use check valve series KM. pplicable model Y-M M X , 0 Y- 0 / 8 Y- 0 / ,, R Y- 0 / 8 00,, 9 Y- 0 00,, / Y- 0 / Y- 0 / , 0, 0 Y- 0 / , 0-06 Y- 0 / Y- 0 / 8 000, 00, Y- 0 / 0,, 60 When T type interface with bracket is required, order as example below. (xample) With L bracket: Y L- With T bracket: Y T- Refer to a table of attachment on P..- for standard port size when applying to. in part number indicates thread. Use nothing for Rc(PT), N for NPT and for (P)..-7
2 .R.L. Unit Series ttachment Specifications Piping dapter () M x 0.8, /8,,, /, /, piping adapter allows installation/removal of the component without removing the piping and thus makes maintenance easier. enter of.r.l. body Piping adapter T-interface (T) M x 0.8, /8,,, / Using a T-interface facilitates the redirection of air flow. Note) 00-M M x 0.8 /8 / / / / / pplicable model 0, W0, 0, R0, 0, R, W 0, M,, WM, W,, R, W 0, M,, WM, W 0 0, R0, W0 L0, M0, 0 WM0, W0 0-06, 0-06, R0-06, W0-06 L0-06, M0-06, ,, 60, 0,, 60 0, R0, L0, 60, R60, L60 Notes) in model numbers indicates a thread type. No indication is necessary for Rc; however, indicate N for NPT, and for. Separate interfaces are required for modular unit. actory mounting of a piping adapter on the models is available as a special order. Octagon T-interface enter of.r.l. body aution in Mounting If a T-interface is used on the IN side of the lubricator, lubricant may be mixed. Use the series KM check valve to avoid such possibility. Y0-M Y- 0 Y- 0 Y- 0 Y- 0 Y0-0 Y0-0 Y0-0 Y0-0 Y0-0 Y0-0 M x 0.8 /8 /8 / pplicable model 0, 0,,,, 0, , , 60, 0, 60 Notes) in model numbers indicates a thread type. No indication is necessary for Rc; however, indicate N for NPT, and for. Separate interfaces are required for modular unit. Refer to the attachment table on ront matter for standard port sizes when using with.
3 Modular ir omponents ttachments & ccessories T-Type Spacer Mx0.8, /8 / Y Y T-type spacer When T-type spacer with bracket is required, please order as follows. xample: L-type bracket:yoil-n0o T-type bracket:yoit-n0o Port size Y-M. Mx0. 8 (8) Y-N0 / 8.9 Y-N0 / (0) Y-N0 / 8. Y-N0 / () Y-N0 /. Y-N0 / 8 () Y-N0 /. Y-N0 / 8 () Y-N0 / 8.9 Y-N0 / () pplicable model. (8). (9). (9).9 ().9 ().8 ().7 (). (9). (). (9). (). (0.) N000 N0 N00 N N N00 N N N00 N N N000 N0 N0 N000-N06 N0-N06 N0-N06 N000 N0 N00 N N6000 N60 ross Spacer Mx0.8,/8 / ross spacer : -port size : No thread Y-M M x 0. 8 Port size pplicable model.9 () Y-N0 / 8. Y-N0 / (0) Y-N0 / 8. Y-N0 / (9) Y-N0 /.6 Y-N0 / 8 (60) Y-N0 / 8.8 Y-N0 / (7).6 (6). (0).69 ().89 (8). (6). ().87 ().0 (8). (6). (0). (). (0).89 (8). (). (6) N000 N00 N0 N00 N0 N N N0 N00 N N N00 N0 N N N0 N000 N00 N0 N0 N00 N000-N06 N00-N06 N0-N06 N0-N06 N00-N06 Return to Menu 87
4 ttachments & ccessories Modular ir omponents Spacer Y Y0 pplicable model Y 0. (8) N000 ~ N0 Y. 9 (0) N00 ~ N0 Y. () N00 ~ N0 N00 ~ N0 Y 0. () N000 ~ N00 Inch (mm) Y 0. () N000-N06 ~ N00-N06 Y 60.9 () N000, N00, N6000 N0, N, N60 Spacer With L-type racket Spacer with L type bracket L type bracket L-type racket 0L L L 0L 0L 0L Spacer with L- type racket Y0L YL YL Y0L Y0L Y60L R L pplicable model.79 ().9 ().8 (). (0). (0).97.7 ().9 ().6 (6).87 ().87 ().9 ().8 (.). (.). (9). (9).7 (). (). ().6 ().6 ().6 ().6 (). ().8 (). () (70). (). ().9 (0) Inch (mm) (8) (.) (7) N000~N0.9.. (0) (.) () N00~N N00~N0 () (.0) () N00~N () (.) N000~N () (.) N000-N06~N00-N N000 N00 N6000 () (6) (6.) N0 N N60 88 Return to Menu
5 Modular ir omponents ttachments & ccessories Spacer with T-type racket Spacer with T-type racket T-type racket T-type racket 0T T T 0T 0T 0T Spacer with T-type racket Y0T YT YT Y0T Y0T Y60T H R L pplicable model.79 ().9 ().8 (). (0). (0).97.7 ().9 ().6 (6).87 ().87 ().9 ().8 (.). (.). (9). (9).7 (). (). ().6 ().6 ().6 ().6 (). ().8 (). () (70). (). ().9 (0) Inch (mm) (8) (0) (.) (7) N000~N (0) (8) (.) () N00~N N00~N0 () (70) (.0) () N00~N () () (.) N000~N () () (.) N000-N06~N00-N N000 N00 N6000 () (00) (6) (6.) N0 N N60 Return to Menu 89
6 Series Spacers and rackets ccessories Spacer (X) enter of.r.l. body Y0 Y00 RLS X X X-X Y00 Y0 Y0 Y00 Y00 Y pplicable model 0, 0, 0, ,, 60 0,, 60 Seal Spacer width Replacement parts escription Seal Material Y00 Note ) HNR Y0 Note ) Y00P-060S Y0P-060S Note ) Y-00 comes with O-rings. Note ) NR seal is used for Y00 spacer because of no direct contact with fluid. Y0 Y0P-060S Part no. Y00 Y00P-060S Y00 Y00P-060S Y600 Y600P-060S Spacer with racket (Z) ø enter of.r.l. body (Y00T, Y0T only) RLS (Y00T, Y0T only) Seal X X X-X Y0T Y00T H K J Spacer width Y00T Y0T Y0T Y00T Y00T Y600T 6 6 escription Seal 8 Replacement parts Material Y00T Note ) HNR Y0T Note ) Y00P-060S Y0P-060S Note ) Y-00T comes with O-rings. Note ) NR seal is used for Y00T spacer because of no direct contact with fluid. ø H J Y0T Y0P-060S Part no. K pplicable model 0, ,, 60, 0,, 60 Y00T Y00P-060S Y00T Y00P-060S Y600T Y600P-060S 8
7 Series Mounting Position for Spacer with racket racket T-interface: T Pressure switch: S heck valve: K -port valve for residual pressure: V SUP. IN OUT IN OUT racket L ttachment ttachment ttachment ttachment ttachment ttachment K S K S T V KS KT KV KST L KSV KTV KSTV ST SV STV TV L L L T 8 S S S V KS KV KSV SV V SV 0 TV 0 T V SV TV 0 V SV : imensions from the end of the IN side to the center of the mounting hole for the first bracket. : Mounting hole pitch between the first and the second bracket. : Mounting hole pitch between the second and the third bracket. L: Mounting hole pitch between the third and the fourth bracket. Refer to dimensions pages for dimension from the center of the piping and the mounting hole.
8 ttachments ross Interface M X 0.8, /8, /, / 8, / Make it possible to diverge piping in all directions. Note) IN/OUT port is not machined for thread piping. ross interface ross interface Y-M Y-0, 0 Y-0, 0 Y-0, 0 Y-0, 0 ile S000, #0 S00, #0 S00, #0 S000, #0 S006, #0 Residual Pressure xhaust Port Valve: (V) Residual pressure exhaust port valve makes it easier to exhaust pressure. Residual pressure exhaust port valve : -Rc(PT) : Without thread pplicable model Y-M M 6 000, 00, 0 Y , 0, Y , 0 Y- 0 00,, 8 Y , 0,, 0 Y , 00, 0 Y , 00 Y Y Note ) in parts number indicates thread. Use nothing for Rc(PT), N for NPT and for (P). 6 aution on ssembling , , 0-06 When mounting directly onto the IN side of lubricator, use check valve series KM between the interface and lubricator. Installation to will be available as a special product. Please consult SM. Specifications ffective area (mm ) IN to OUT OUT to XH VHS00 VHS VHS Note) Use air filter on the IN side to protect operation. How to Order.- VHS 00 0 Residual pressure exhaust port valve 0 8 ody size Thread N Rc(PT) NPT (P) Residual pressure exhaust port valve ile VHS00 VHS00 VHS000 IN/OUT XH VHS00 8, VHS00, () VHS000, 8, Note ) NOT applicable to aution on ssembling Pressure switch and T type interface can not be mounted to OUT side of residual pressure exhaust port valve. S00, # S0, # S000, #
9 Series heck Valve (K) Rc/8,, check valve with intermediate air release port can be easily installed to prevent a back flow of lubricant when redirecting the air flow and releasing the air on the outlet side of the regulator. heck valve ypass port size for redirecting air flow Specifications KM00 KM00 KM000 KM ffective area (mm ) 8 e sure to use above check valves when redirecting the air flow on the inlet side of the lubricator. Threads for IN and OUT ports are not machined. How to Order 00 0 IN KM00 KM00 KM000 ypass port sizes /8, /8,, OUT pplicable model,,, 0, 0 Note) Note) Not applicable to Refer to the attachment table on page or for standard bypass port sizes applicable to. heck valve ody size 0 ypass port size for redirecting air flow Symbol Port size /8 ody size 0 Thread type Nil N Rc NPT
10 ttachments & ccessories Modular ir omponents Piping daptor Mx0.8, /8 / / llows for ease of installation and maintenance. Piping daptor -0 *When piping adaptor with bracket is required, please order as follows. xample: L-type bracket: L-N0 T-type bracket: T-N0 Inch (mm) Port size pplicable model N0 0 NW000 0-M Mx0. 8 (6) () (7.) N000 NR000 N000 -N0 / 8 N N0 / N00 NR00 NW00 () () () -N0 / 8 N000 NM00 N00 -N0 /.0.. N 0 N 0 -N0 / 8 (6) (9) (.) N00 NR00 NW N0 / N000 NM00 N00 (0) (9) (.) 0-N0 / 0-N0 / 8 0-N0 / 0-N06 / 0-N06 / 60-N06 / 60-N0. ().97. (6). (0).8 ().8 ().7 (). ().66 (.).66 (.).8 (6.).7 (.) N000 N000 NR000 NW000 NL000 NM000 N000 N000-N06 N00-N06 N00-N06 N000 N00 N6000 N0 N N60 N000 NR000 NL000 N6000 NR6000 NL6000 The check valve spacer is designed to prevent back flow of lubricated air from a lubricator into a non-lubricated line. heck Valve heck valve NKM00 How To Order NKM 00 N 0 IN OUT heck Valve ody size /8 0 / Port thread Nil Rc(PT) (P) N NPT 0 /8 0 0 NKM00 /8 / NKM00 /8 / NKM000 / 8 Port size pplicable model. (0).09 (). (70). (0).89 (8). ().0 (8). ().6 (). (). ().7 (8). (). ().9 () N00 N0 N00 N0 N00 N0 N000 N00 8 Return to Menu
11 Series -Port Valve for Residual Pressure Release (V) With the use of a -port valve for residual pressure release, pressure left in the line can be easily exhausted. -port valve for residual pressure release øi -ø0 H JIS symbol () Lockable at the time of exhaust Specifications (P) (R) VHS VHS ffective area (mm ) ( )ffective rea mm (v) IN,OUT XH. IN to OUT OUT to XH. /8 0 (0.) (0.60) /8 (0.) 6 (0.87) 6 (0.87) (0.) (.68) 9 (.) VHS0 VHS0-06 / / / 7 (.6) 8 (.06) (.) 77 (.7) 6 (.) 0 (.7) () 9 (.66) VHS0 / 8 (.) 0 (.7) / (6.78) (.87) Note) Use an air filter on the IN side for operating protection. IN SUP XH. OUT -port valve for residual pressure release Symbol 0 0 VHS ody size pplicable model, 0 0, 60 Note) Note) When the valve is mounted on 60, the flow rate may decrease depending upon the mounting position. How to Order 0 RZ VHS VHS VHS0 VHS0-06 VHS H 8 6 I aution. onsult SM when a pressure switch and T type spacer are installed on the outlet of pressure release valve. If a stop valve or a silencer is connected to the exhaust port of VHS/, the effective sectional area should be larger than the figure indicated in the following table, to prevent malfunction caused by back pressure. (This is not applicable to VHS0 and VHS0) VHS VHS ffective area (mm ) 7 Symbol Thread type Nil Rc N NPT /8 / / V V ody size 0 V V V V V V 0 V V Optional specifications ode escription R low direction: Right to left Z Note ) Name plate in imperial units (PSI, ) Note ) This product is for overseas use only according to the new Measurement Law. (The SI unit type is provided for use in Japan.)
12 ttachments Pressure Switch with Piping dapter JIS symbol V Specifications luid Proof pressure Max. operating pressure Set pressure range (off) ifferential mbient and fluid temperature Switch haracteristics ontact point structure Max. contact point capacity Voltage, Max. operating current How to Order IS000 Pressure switch with piping adapter N ody size or 00 or 00, 00 or to 0 0 YL Thread Rc(PT) NPT (P) ir.0mpa 0.7MPa 0. to 0.MPa 0.08MPa to 60 (No condensation) a V /W V, V, 8V, 00V, V to V : 0m, 8V : 0m, 00V : m ttachment Y YL YT Piping adapter port size () IS000-0Y / 8 IS000-0Y / IS000-0Y / 8 IS000-0Y / IS000-0Y / 8 IS000-0Y / IS000-0Y / IS000-0Y / 8 IS000-0Y / IS000-06Y / Options X Length of lead wire: m X Setting pressure range: 0. to 0.6MPa X0 Reverse mounting (Left side mounting style) Without attachment With attachment With attachment and L type bracket With attachment and T type bracket / 8 / / 8 / / pplicable model 00, 0,, 0 W00 00,, 00, 0,, 0 W00, W0 000, 00, 0 0, 00 W000, W00 () Note) in the part number indicate a connecting thread. Use nothing for Rc(PT), N for NPT and for (P). Note) an NOT be mounted on "0 0-06" and "W0 0-06". With retainer, O ring and bolt. onsult SM when mounting the pressure switch on "0 0-06" and "W0 0-06". or more information, refer to p U R IR VX W MR WM W ITV V V VY L ttachments for IS000 Pressure switch applicable model No. IS000- to IS000- to IS000-0 to 06 Y type standard Y Y Y0 YL type with L type bracket YL YL Y0L YT type with T type bracket YT YT Y0T.-8
13 ttachments Pressure Switch: (S) ompact pressure switch can be mounted easily. Makes it easier to detect pressure in lines. Pressure switch Specifications luid Proof pressure Max. operating pressure Set pressure range (off) ifferential mbient and fluid temperature Switch haracteristics ontact point structure Max. contact point capacity Voltage, Max. operating current or more information, refer to SM Pressure switch catalog. (atalog No.8) How to Order IS000M YT JIS symbol ir.0mpa 0.7MPa 0. to 0.MPa 0.08MPa to 60 (No condensation) a V /W V, V, 8V, 00V, V to V : 0m, 8V : 0m, 00V : m IS000M-Y IS000M-Y IS000M-Y IS000M-Y IS000M-6Y aution on ssembling pplicable model 00,, 00,, 00,, 000, 0, , , 00, ,, 60 ttachment for pressure switch can be installed at the IN/OUT side of, R, L, M and. Mounting at the IN/OUT side of W and upward handle ofr is not possible. V U R IR VX W MR WM W ITV V V VY L Pressure switch 6 ody size or 00 or 00, 00 or to 0 or or 000, 6000 ttachment Y YL YT Options X X Without attachment With attachment With attachment and L type bracket With attachment and T type bracket Length of lead wire: m Set pressure range: 0. to 0.6MPa ttachments for IS000M Pressure switch applicable model No. IS000M- IS000M- IS000M- IS000M- IS000M-6 Y type standard YM YM Y0M Y0M Y60M YL type with L type bracket YLM YLM Y0LM Y0LM Y60LM YT type with T type bracket YTM YTM Y0TM Y0TM Y60TM.-
Modular Style Air Combination. Assembled by simply tightening the screws
Modular Style Air Combination Series AC Assembled by simply tightening the screws High strength die cast bracket Drain cock for one push drain exhaust Oil needle for easy oil volume adjustments The improved
More informationUniversal type Port size: M5, Rc1/8, Rc1/4. Max. working. pressure
irect acting port solenoid valve for compressed air, manifold (special purpose valve) Series Universal type Port size: M, Rc/, Rc/ Refer to nding for more details. JIS symbol ommon supply / common exhaust
More informationRotary Switches AC09, 16 and 32
09, 16 and 32 igital code output type escription FUJI series rotary switches offer a wide choice of output codes. They feature sliding u-flashed contacts for high contact reliability. Inhibitor and parity
More informationOdor Removal Filter. Model Note) 1 8, , , , 3 4. Model/Free Standing Type AMF800. Model/Piping Support Type AMF Port size
dor emoval ilter Series os fficiently can remove odor in compressed air with an activated carbon element. The unit is designed for use in the area such as a clean room where odors must be avoided. Can
More informationOdor Removal Filter Series AMF
Odor Removal Filter Series AMF Series AMF Odor Removal Filter efficiently removes odor in compressed air with an activated carbon element. The unit is designed for use in food processing, pharmaceutical,
More informationPilot operated 2 port solenoid valve (general purpose valve) Standard specifications NC (normally closed) type C C. 2 /s) Starting
21/22 Series (general purpose valve) 21/22 Series NC (normally closed) type, NO (normally open) type Port size: Rc1 1/4 to Rc2, 32 to 50 flange iaphragm structure JIS symbol 21: Common specifications Item
More informationAME Model. (1) Rated flow (l/min (ANR)) Port size (Nominal size B) Weight (kg)
Super Mist Separator Series AME Series AME separates and absorbs aerosol state fine oil particles in compressed air and changes the oil lubricating compressed air to oilless equivalent air. It should be
More informationUniversal type Port size AS13 1F-M3. M3 x 0.5 M5 x 0.8 AS23 1F-01 AS23 1F-02 AS33 1F-02 AS33 1F-03 AS43 1F-04 R 1/8 R 1/4 R 1/4 R 3/8 R 1/2
Minimizes installation time and cost Reduces the mounting height and enables compact machinery design. Effective area is larger than the former model. Tube swivels 0 Universal type permits 0 piping swivel.
More informationWorking pressure. 420 bar. Style T. Style B. Style D Style V Style Z. Style S B B D.I. D.I. D.I. D.I. D.I. D.I.
5 FP SRIS FP Working pressure 40 bar Style S Style Style T Style D Style V Style Z 5 Technical data Filter body (Materials) ead: Cast iron (chemical heat treatment) ousing: Steel (chemical heat treatment)
More informationNormally Closed (N.C.), Normally Open (N.O.), Common (C.O.)
Series VVX// The models VX// have been revised. For details, please refer to catalog no. ES0-A. Similar updating Normally Closed (N.C.), Normally Open (N.O.), Common (C.O.) Courtesy of Steven Engineering,
More informationPolígono Indutrial O Rebullón s/n Mos - España -
FP 5 Polígono Indutrial O Rebullón s/n. 646 - Mos - spaña - rodavigo@rodavigo.com SRIS FP Working pressure 40 bar Style S Style Style T Style D Style V Style Z 5 Polígono Indutrial O Rebullón s/n. 646
More informationMaximum pressure 420 bar Flow rate to 152 l/min. 560 bar. 140 l/min. Flow rate l/min FMM 050 1/2 1,50 3/4 1,00. Δp bar 0,50 0,00 FHA 051 1,50 1,00
FMM 00 Maximum pressure 0 bar Flow rate to l/min FHA 0 Maximum pressure 60 bar Flow rate to 0 l/min Technical data FMM 00 Filter housing (Materials) Head: Cast iron (chemical heat treatment) Housing: Steel
More informationFlow rates to 750 l/min
FP Maximum pressure 0 bar Flow rates to 70 l/min Technical data Filter housing (Materials) ead: Cast iron (chemical heat treatment) ousing: Steel (chemical heat treatment) Bypass valve: AISI L (FP 0-0)
More informationLMP 210. Style B. Style S. Maximum pressure 60 bar F l o w r a t e s t o l / m i n
LMP 0 Style S Style Maximum pressure 60 bar F l o w r a t e s t o 7 0 l / m i n 6 Technical data Filter housing (Materials) Head: luminium Housing: nodised luminium ypass valve: Nylon - Steel Pressure
More informationFlow rates to 750 l/min
FP Maximum pressure 0 bar Flow rates to 70 l/min Technical data Filter housing (Materials) ead: Cast iron (chemical heat treatment) ousing: Steel (chemical heat treatment) Bypass valve: AISI L (FP 00-0)
More informationValve Products ADEX Series Valves
atalog 000-2US X alves X is a miniature low power consumption solenoid valves, ideal for powering small to mid-sized pneumatic actuators used in automation and process applications. X's versatility is
More informationFMM 050 uk :26 Pagina 5 (1,1) FMM 050
uk 6-07-006 9:6 Pagina 5 (,) 30 uk 6-07-006 9:6 Pagina 5 (3,) SRIS Working pressure 80 bar Style S Style Style T Style D 3 uk 6-07-006 9:6 Pagina 7 (,) Technical data Filter body ( M a t e r i a l s )
More informationFlow rates to 590 l/min
LM 400-40 - 4 Maximum pressure bar Flow rates to 590 l/min Technical data housing (Materials) ead: nodized luminium ousing: nodized luminium Manifolds: Steel - Painted black ypass valve: Steel -way ball
More informationFMP :41 Pagina 5 (1,1) FMP
FMP 6-07-006 9:4 Pagina 5 (,) FMP 6 FMP 6-07-006 9:4 Pagina 5 (,) SERIES FMP Working pressure 80 bar Style S Style Style T Style D Style V Style Z 7 FMP 6-07-006 9:4 Pagina 7 (,) Technical data Filter
More informationSERIES FMP. Working pressure. 280 bar. Style D Style V Style Z. Style T. Style B. Style S B B D.I. D.I. D.I. D.I. D.I. D.I.
6 FMP SERIES FMP Working pressure 80 bar Style S Style Style T Style D Style V Style Z 7 Technical data Filter body (Materials) ead: Cast iron (chemical heat treatment) ousing: Cast iron (chemical heat
More informationHigh Pressure Ball Valves
High Pressure all Valves 0,, 0, 0,000 psi (0 bar),000 psi (0 bar) 0,000 psi ( bar) ITOK Group ITOK GmbH (Headquarter) Sprendlinger Landstr., 0 Offenbach am Main, Germany Tel.: + 00 ax: + 00 ITOK, Inc.
More informationC-Lube Linear Way ML ML MLF
Maintenance ree & U.S. PTTD C-Lube Linear ay Variation of C-Lube Linear ay Shape Length of slide unit Model code C-Lube Linear ay is a linear motion rolling guide, incorporating the C-Lube as a components
More informationLO1 SERIES. compact direct solenoid actuated valves
SRS compact direct solenoid actuated valves 0 d i r e c t s o l e n o i d a c t u a t e d v a l v e s T N T................................................... V V O S T O N........................................
More informationFlow rates to 475 l/min
FMP Maximum pressure 0 bar Flow rates to 7 l/min Technical data PRSSUR FILTR Filter housing (Materials) ead: Cast iron (chemical heat treatment) ousing: Steel (chemical heat treatment) Bypass valve: Brass
More informationSRL3. Rodless cylinder. Rodless type. ø12 ø16 ø20 ø25 ø32 ø40 ø50 ø63 ø80 ø100
Overview High load and long service life. that can operate at high speeds. Ample variation with sizes available from ø to ø00. eatures lat cylinder lat piston with a structure that could take on the load.
More informationHigh Pressure fi lters. FHA 051 series. Maximum working pressure up to 56 MPa (560 bar) - Flow rate up to 140 l/min. High Pressure fi lters
High Pressure fi lters FHA 0 series Maximum working pressure up to 6 MPa (60 bar) Flow rate up to 0 l/min 99 High Pressure fi lters Introduction FILTER SIZG DEX CALCULATION CORRECTIVE FACTOR Page Introduction
More information5/2-5/3 SPOOL VALVES MULTIFUNCTION air operated or solenoid air operated with subbase ISO 5599/1 sizes 1, 2 and 3
/ - / SPOOL VALVES MULTIFUNCTION air operated or solenoid air operated with subbase ISO 99/ sizes, and Series Fluids air or inert gas, filtered, lubricated or not Operating pressure Pilot pressure Ambient
More informationø6, ø10, ø15, ø20, ø25, ø32, ø40, ø50, ø63 How to Order Switch rail Nil Standard stroke Refer to page 12 for standard stroke.
Magnetically Coupled Rodless Cylinder: Direct Mount ype Series ø, ø, ø, ø, ø, ø, ø, ø0, ø Direct mount type mm mm mm mm mm mm mm 0 0 mm mm 00 MB Piping type Both sides piping type Centralized piping type
More informationFlow rates to 485 l/min
FB Maximum pressure 0 bar Flow rates to 8 l/min Technical data Filter housing (Materials) ead: Cast iron (chemical heat treatment) ousing: Steel (chemical heat treatment) Bypass valve: Steel Check valve:
More informationMICRO-AIR SERIES. miniature direct solenoid actuated valves
R-R SERES miniature direct solenoid actuated valves RR i c r o i r d i r e c t s o l e n o i d a c t u a t e d m i n i a t u r e v a l v e s T E D T................................................... 3
More informationF01 D S F01 F01 F01. Vacuum Ejector Box Type (Built in Silencer)/Body Ported Type Series ZH. How to Order. Product Recommendation.
2 Series ZH jector jector ox Type (uilt in Silencer)/ody Ported Type Series ZH eatures Symbol ompact and lightweight desing. hoice of nozzle diameters. Standard or low vacuum pressure options. One touch
More informationMaximum pressure 80 bar
Maximum pressure 80 bar F l o w r a t e s t o 0 0 l / m i n LMP 0 Maximum pressure 80 bar F l o w r a t e s t o 6 0 l / m i n Technical data LMP 0 Filter housing (Materials) Head: luminium Housing: ataphoresis
More informationHigh Pressure fi lters. FHB series. Maximum working pressure up to 32 MPa (320 bar) - Flow rate up to 485 l/min
High Pressure fi lters FHB series Maximum working pressure up to MPa (0 bar) - Flow rate up to 8 l/min High Pressure fi lters Introduction FILTER SIZING INDEX CALCULATION CORRECTIVE FACTOR Page Introduction
More informationair and solenoid air operated 5/2-5/3 ISO 5599/01 - Size 2
Series 4/PH MULTIFUNCTION SPOOL VALV air and solenoid air /-/ ISO 99/0 - Size ports / positions SPCIFICATIONS FLUID : or neutral gas, filtered, lubricated or not PRSSUR : 0,90 to + bar (can be used with
More informationAir Cooler Industry AC-LN 1-7 / ACA-LN 2-7 / ACAF-LN 2-7
ir ooler Industry -LN -7 / -LN -7 / F-LN -7 Symbol General The -LN -7 air cooler series can be used in all areas where either oil or water-glycol is to be cooled with air. The coolers with an axial fan
More informationElement description. Multipass test in compliance ISO Contaminant ISO MTD. A - Microfibre
Style FZ Stainless Steel Pressure filter Technical data element Style In-Line filter: FZ 00-0 FZP 0 FZ 0 FZP 6 FZX 0 Manifold mounting: FZ 0 FZM 0 Max. working pressure: 700 bar Max. working pressure:
More informationCooling Water Flow Regulator
Temperature controlled, indirectly and directly actuated diaphragm valves / seat valves Port size G 3/8 to G DN 0 to DN 0 ontinuous regulation High accuracy No auxiliary energy required Technical data
More informationFree Mount Cylinder Double Acting, Double Rod. ø6, ø10, ø16, ø20, ø25, ø32. How to Order. Action. D Double acting. Standard stroke (mm)
ouble Acting, ouble Rod eries CUW ø, ø, ø1, ø, ø2, ø How to Order CUW With auto switch CUW MBW Built-in magnet ouble rod 1 2 mm mm 1 mm mm 2 mm mm Action ouble acting Number of auto switches Nil 2 pcs.
More informationRotary modules.
Rotary modules www.comoso.com www.comoso.com Rotary modules ROTARY MODULES Series Size Page Rotary modules RM swivel unit 156 RM 08 160 RM 10 162 RM 12 164 RM 15 168 RM 21 172 RM rotor 176 RM 50 180 RM
More informationISWA/ISPWA SPLASH-PROOF SINGLE-AXIS ROBOT.
ISW/ISPW SPLSH-PROO SINGL-XIS ROOT www.intelligentactuator.com irst in the industry! The lineup of splash-proof sliders has been extended. You can now choose a splash-proof actuator of desired size to
More information10A-2 AB 299 AB A-2. Double rod type Adjustable stroke (retraction side) Double acting type. Series variations. Series. Cylinder bore
-2-2 9 Series variations ouble acting type ouble rod type djustable stroke (retraction side) Standard type Switch Set VL Set SV Set Standard type VL Set Standard type VL Set Series -2-2R -2V2-2K2-2 -2V2-22
More informationP303 Pressure Regulator
P0 Pressure Regulator Minimize Sudden Downstream Load Change Wide Pressure Ranges Integral Monitoring The BelGAS P0 and P0H gas pressure reducing regulators are available with a true monitor regulator,
More informationMX Series COMPACT AND USER FRIENDLY. Metal Tube Type Variable Area Flowmeter OUTLINE STANDARD SPECIFICATION MODEL CODE MX-400, MX-71 MX-52E
OMPT ND USER FRIENDLY MX Series Metal Tube Type Variable rea Flowmeter OUTLINE MX Series flowmeter is the metal tube type variable area flowmeter having the unified face-to-face dimension. The compact
More informationFlow rates to 485 l/min
FB Maximum pressure 0 bar Flow rates to 8 l/min Technical data Filter housing (Materials) ead: Cast iron (chemical heat treatment) ousing: Steel (chemical heat treatment) Bypass valve: Steel Check valve:
More informationFlow rates to 485 l/min
FB Maximum pressure 0 bar Flow rates to 8 l/min Technical data Filter housing (Materials) ead: Cast iron (chemical heat treatment) ousing: Steel (chemical heat treatment) Bypass valve: Steel Check valve:
More information40 to 300l/min 14MPa. wpressure adjustment is possible across a wide range, from 0.25 to 14MPa {2.5 to 143kgf/cm 2 }.
ounter alance eatures UR UR VV qhis modular valve is used to control actuator back pressure and for other pressure control valve applications. 0 to 00l/min a w adjustment is possible across a wide range,
More informationHD 049 HD 069 HD 172 HD 319 HD 419 HD 619. Operating pressure up to 8700 psi Nominal flow rate up to gpm us
H i g h P re s s u re i l t e r K i t s H 049 H 069 H 172 H 319 H 419 H 619 Operating pressure up to 8700 psi Nominal flow rate up to 118.9 gpm 40.95-3us e s c r i p t i o n pplication In the high pressure
More informationHigh Power Cylinder. RHC Series. ø20, ø25, ø32, ø40, ø50, ø63, ø80, ø100. REA REB REC Smooth MQ RHC RZQ D- -X. Low Speed
High Power ylinder RH Series ø, ø, ø3, ø4, ø, ø, ø8, ø RE RE RE RH 34 High power cylinder: cushioning for high speed operation (3 low/medium speed operation with heavy loads The capacity to absorb to times
More informationA wide selection of pipe and orifice sizes is offered. Valves are available with threaded ports in brass and stainless steel.
Solenoid Valve Waterhammer-Free, 0- PSI /-Way; NPT - NPT; 0- PSI Advantages/Benefits Type 63 Waterhammer-free Low noise Zero differential pressure ompact design with high flow rates Low maintenance oil
More informationBody (Black) O-ring Stud. Effective when piping in a confined space. The body and the threaded portion can rotate (For positioning to some extent).
Antistatic One-touch Fittings Tubing: Metric Size/Connection Thread: M, Rc, G, NPT, NPTF Series KA RoS One-touch fitting with antistatic prevention. One-touch IN/OUT connection. Possible to use from vacuum
More informationModel Selection 1. Process Valves. Air. Vacuum
Process Valves Model Selection For product specifications such as maximum operating pressure differentials and operating temperature ranges, refer to the relevent pages of each product. Air One-touch fittings
More informationFluoropolymer Fittings Hyper Fitting
Fluoropolymer Fittings yper Fitting Series Q S Q QR Quadruple seal construction (PT.) efore tightening Nut Tubing support Insert bushing Tubing fter tightening Quadruple sealing parts New PF ourtesy of
More informationBore size: 4, 6, 8, 10. Double acting. Double acting Compressed air Withstanding pressure Ambient temperature Port size
*2 2 2 G 2 V2 /V2 V 2 * * U U G U2 2 U 2 G pecifications troke length ore size ylinder switch specifications escriptions pplications utput method ower voltage oad voltage oad current urrent consumption
More informationSTAINLESS STEEL FILTER
STINLSS STL FILTR Style FZ Stainless Steel Pressure filter Technical data Style In-Line filter: FZ 00-0 FZP 0 FZ 0 FZP 6 FZX 0 Manifold mounting: FZ 0 FZM 0 Max. working pressure: 700 bar Max. working
More information29 188/ way Proportional Flow Control Valve Model 2 FRE 6./.,Series 2X. Ordering Code: Proportional Flow Control Valve 2 FRE 6 2X K4 V *
-way roportional low Control Valve Model RE./.,Series X Size... SI ( bar).... GM ( L/min) R 9 88/.98 R 9 88/.98 Replaces:.9 With pressure compensator for the control of an oil flow independent of pressure
More informationOperating Instructions for Digital Manometer. Model: MAN-SD
Operating Instructions for Digital Manometer Model: MAN-SD 1. Contents 1. Contents...2 2. Note...3 3. Instrument Inspection...3 4. Regulation Use...4 5. Operating Principle...4 6. Mechanical Connection...5
More information/2 way valves (solenoid actuated diaphragm with forced lifting) 1/4... 2
/ way valves (solenoid actuated diaphragm with forced lifting) /4... Damped operation Operation without differential Suitable for vacuum igh flow rate For systems with low or fluctuating Brass body Wide
More informationSECTION 1 - WHAT IS A BTU METER? BTU's = Flow x ΔT Any ISTEC BTU Meter System consists of the following main components:
SECTION 1 - WHAT IS A BTU METER? ISTEC BTU Meters measure energy usage by multiplying flow rate and temperature difference. As the water (or other liquid) passes through these lines, the multi-wing turbine
More information5. DRIVE 1. SAFETY 2. PREPARATION 3. FRAME 4. TRANSMISSION 6. ROW UNIT 7. OPTIONAL EQUIPMENT
TABLE OF CONTENTS 1. SAFETY 2. PREPARATION 3. FRAME 4. TRANSMISSION 5. DRIVE 6. ROW UNIT 7. OPTIONAL EQUIPMENT DRIVE Standard Turbofan 540, 450 & 1000 RPM with PTO Drive Your Monosem planter will be equipped
More information35P-3 HH 3 HH 2 35P-3. f32 f40. f50 f63. f80 f100. Switch Set. Type Standard type Switch Set
f f f f f f Kind of piston seal U seal Slipper Seal U seal Slipper Seal Nominal pressure. MPa Maximum allowable pressure. MPa Proof test pressure MPa Minimum operating pressure. MPa or less Working speed
More informationIts modular concept allows to build up a ball valve for any degree of automation and any kind of application
Type 2657...59 DN 10 up to 80 mm; Plastic; 2/2 way dvantages/benefits ntegrated pilot valves, position feed-back and limit switches available Customized system solutions with Burkert valves & sensors With
More informationE 094 E 103 E 143. Tank top mounting Connection up to G1 Nominal flow rate up to 135 l/min e
R e t u r n F i l t e rs E 094 E 103 E 143 Tank top mounting Connection up to G1 Nominal flow rate up to 135 l/min 20.30-5e D e s c r i p t i o n Application In the return line circuits of hydraulic systems.
More informationSeries MHY2/MHW Angular Gripper. Cam actuation style is now standardized! MHZ2 MHZJ2 MHQ MHL2 MHR MHK MHS MHC2 MHT2 MHY2 MHW2 MRHQ 2.
18 Angular Gripper Cam Style Rack & Pinion Style Series / Cam actuation style is now standardized! 2.8-1 18 Angular Gripper 18 Angular Gripper Series / Cam Style Rack & Pinion Style Series / Series MHY/Cam
More informationVISUAL LEVEL INDICATORS
VIUL LEVEL INDICTOR LV... The level indicators series is available for both static and mobile applications; the construction materials used make it possible to guarantee service with wide temperature variations
More informationCKA Series. 3-way jaw thin chuck double acting/single acting. Operational stroke length: 5, 6, 7, 9, 20, 25, 30, 38mm.
G G B A S F J L L H LB N/ S/F Specifications Descriptions Size Cylinder bore size Operating method Working fluid Max. working pressure Min. working pressure Ambient temperature Port size Operational stroke
More informationHRN/HRN-C Series Hydraulic Vane Rotary Actuators
HRN/ Hydraulic Vane Rotary Actuators Vane Actuators Tork-Mor HRN Contents Features... 2 Ordering Information... Engineering Data / Specifications... Dimensions... Features... 1 Ordering Information...12
More informationK 080/12 F 10 K 3-2X/.. Features
RE 2 1/11.02 Replaces: 0.2 Fine throttle Type F Nominal sizes and Series 2X and 3X Maximum operating pressure 2 bar Maximum flow 0 L/min K 00/12 F K 3-2X/.. K 0/ F P 3-3X/.. Overview of contents Contents
More informationMRH. Return Filters RETURN FILTER
MRH Return ilters RETUR ILTER Return ilters MRH MRH MPa (0 bar) Port sizes: / / low rates:.00 l/min TECHICAL ATA Max. working pressure: MPa (0 bar) Max. test pressure: MPa ( bar) ursting pressure: 6 MPa
More informationSpecifications. Stroke length. Small direct mounting cylinder MDC2 Series. Port size: M3 (For 4, 6, 8 mm bore) M5 (For 10 mm bore) Descriptions
mall direct mounting cylinder 2 eries ort size: (or,, mm bore) (or mm bore) I symbol ingle acting spring return type ingle acting spring extend type ouble acting VI. pecifications escriptions ore size
More informationDirect Operated Type Solenoid Operated Proportional Directional Control Valve
Direct Operated Type Solenoid Operated Proportional Directional Control Valve Features These four-way proportional directional control valves enable control of the forward and reverse motion of an actuator.
More information4/3-way servo solenoid directional control valves with electrical position feedback (Lvdt DC/DC) (ruggedized design)
4/3-way servo solenoid directional control valves with electrical position feedback (Lvdt DC/DC) (ruggedized design) Type 4WRL10...25 Sizes (N) 10, 16, 25 Unit series 3 Maximum working pressure P,, 350
More informationLCC***N**S. A/F (mm) Size G 1/2 G 3/4 G 1 G 1 1/4 G 1 1/2 G 2 G60. Ø hole for Expansion kit. Size. Diamètre G20 G26 G33 G42 G48.
eries L***N imensions L***N** L***N**K Ø E /F G F L***N***** (Materials) ody: Nylon Lens: Polyamide 3 ontrast screen: Nylon eals: NR Inorganic fibre 5 Expansion kit: rass NR L/N 5 3 5 L***N Example: L
More informationOperating instructions Magnetic-inductive flow sensor SM6004 SM7004 SM / / 2014
Operating instructions Magnetic-inductive flow sensor SM6004 SM7004 SM8004 80003223 / 00 05 / 2014 Contents 1 Preliminary note...3 1.1 Symbols used...3 2 Safety instructions...4 3 Functions and features...5
More informationHDF series - PARALLEL GRIPPER
Operation specification and Ordering expression Internal structure DS Angular DM 0 Angular Specification ore size Type of operation Fluid Pressure range Range of service temperature kgf/cm (kpa) Max. operation
More informationCooler-Bypass Thermostat Valve, Size 10
Cooler-Bypass Thermostat Valve, Size Q max = l/min, p max = bar Temperature-controlled, integral relief function Description These direct acting bypass thermostat valves are size, temperature controlled,
More informationModel Selection 1. Process Valves
Process Valves Model Selection For product specifications such as maximum operating pressure differentials and operating temperature ranges, refer to the relevent pages of each product. Air, Inert gas
More informationSpecifications. Performance. Mechanical Properties. Optional Accessories SR50. Saddle (CA 10B) (Option) Mount Base. LCR-B-5KNS7 to 50KNS7
LR--S7 Tension Meter Load ell 5 to 0 kn TRNSURS igh safe overload rating of 0% max. Mechanical stopper activating against overloads of 1% to 0% ermetically sealed structure with inert gas filled in ighly
More information2/3 Port Valves for Fluid Control Model Selection 1
/ Port Valves for Control Model Selection Model Selection For product specifications such as maximum operating pressure differentials and operating temperature ranges, refer to the relevent pages of each
More information( Single Case Construction )
OVL FLOWMETER Meter Size:,,,, ( Single ase onstruction ) Pocketless Design GENERL SPEIFITION GS.No.GBB--E GENERL The OVL flowmeter is a positive displacement type flowmeter comprising a pair of oval gear
More informationCompact Guide Cylinder with Lock Series MLGP
Compact Guide Cylinder with Lock Series ø,,,, ø,,, ø0 CLG CL CN MLC Drop prevention when the pressure of air source is decreased or the residual pressure is released. Drop prevention for press fitting
More informationDS 300. Electronic Pressure Switch. with IO-Link interface. Stainless Steel Sensor. accuracy according to IEC 60770: 0.35 % FSO.
DS 00 Electronic Pressure Switch with IO-Link interface Stainless Steel Sensor accuracy according to IEC 60770: 0.5 % FSO Nominal pressure from 0... 00 mbar up to 0... 600 bar Digital output signal IO-Link
More informationOur policy is one of continued research and development. We therefore reserve the right to
D/99000, D/99000 ompact cylinders on-magnetic and magnetic piston Double acting Ø 12 to 160 mm ight weight ompact design, which is considerably shorter than IS/VDA or FA equivalent. ow friction characteristics
More information4 Way Reversing Valve
STANDARD 4 Way Reversing Valve SHF series four-way reversing valves are applicable for heat pump systems such as central, unitary and room air conditioners to realize switching between cooling mode and
More informationMark 55, SPA55 & PA55 Series
single solenoid open center single solenoid pilot closed center pilot 5 orted, 2 and 3 position, 4-way, Spool & Sleeve v: 5.5 Direct solenoid, solenoid pilot, or air pilot actuated lug-in solenoid with
More information2/3 Port Valves for Fluid Control Model Selection 1
/ Port Valves for Control Model Selection Model Selection For product specifications such as maximum operating pressure differentials and operating temperature ranges, refer to the relevent pages of each
More informationTerminal Block Accessories
Kliptite (Quick onnect) - Single Row Specifications: Terminal lock ccessories Kliptite (Quick onnect) accept standard female wire terminals. These Klipties are ideal for applications that require a positive,
More informationMPF SERIES RETURN FILTER
MPF SERIES The series of filters MPF has specifically been designed for use on mobile applications, agricultural machinery and power units. The MPF filter range is suitable for flow rates up to 750 l/min.
More informationM/60210/M Miniature rotary actuators
M/6020/M Miniature rotary actuators Double acting - Magnetic piston - Ø 2 and 20 mm Smooth operation with zero backlash Lightweight ompact envelope dimensions Integral magnets for positional feedback TEHNIL
More informationEMI Filtered Connectors
MI ed onnectors from performance to board space, to cost, we offer many reasons and options for managing MI @ the signal & power I/O Series errite ed onnectors offer a low cost, space saving solution for
More information10B-6 10B-6 AB 241 AB B-6 10B-6. Stroke Range. Double. type. Cylinder bore. Double brake type. Single brake type 10B-6. Cylinder bore (mm)
0 B- B- 1 Standard type, Switc Set Type Single brake type ouble brake type Series B- B- Cylinder bore (mm) Working fluid Lubrication Working pressure range roof test pressure Working speed range Working
More informationDirect-operated 2/2-way solenoid valves Type EV210B
Data sheet Direct-operated 2/2-way solenoid valves Type EV20B EV20B covers a wide range of direct-operated 2/2-way solenoid valves for universal use. EV20B is a very robust valve program with high performance
More informationmandata_us :43 Pagina 83 (1,1) FHB 82
8 FHB SERIES FHB Working pressure 4600 psi Style S Style B Style T Style D B B B B D.I. D.I. D.I. D.I. A A A A 8 Technical data Filter body ( M a t e r i a l s ) Head: Cast iron (chemical heat tre a t
More informationFVBSS fixed volume bottle
N FVBSS fixed volume bottle Sampling System The SENSOR Fixed Volume Bottle Sampling System (FVBSS) provides a repeatable fixed volume of sample during each sampling process without stopping flow of the
More informationBB1 & BB2 INSTALLATION & MAINTENANCE INSTRUCTIONS
BB1 & BB2 INSTALLATION & MAINTENANCE INSTRUCTIONS DESCRIPTION / IDENTIFICATION The BB series valve uses Proportion- Air closed loop technology for pressure control. It gives an output pressure proportional
More informationVOLUMEC. Valve Position Indicator 5
VOLUMEC Valve Position Indicator 5 2 KRACHT CORP. 8600 S Wilkinson Way Unit A Perrysburg, OH 43551 USA P +1 419 874 1000 F +1 419 874 1006 flowmeters@krachtcorp.com www.krachtcorp.com VOLUMEC Valve Position
More informationIdentification Number
Identification Number The specification of Micro Linear Way LWL is specified by the identification number, which consists of a model code, a size, a part code, a preload symbol, a classification symbol,
More informationThe 505F Series 3/4/5-Way Ball Valve. Standard Features and Benefits. Operating Conditions. Specifications. Options
The 505F Series //5-Way Ball Valve The 505F is a true multi-way ball valve with balanced fourseat construction. This full port valve is available in a variety of flow plans which can replace multiple two-way
More informationReturn fi lters. MPI series. Maximum working pressure up to 1 MPa (10 bar) - Flow rate up to 3000 l/min
Return fi lters series Maximum working pressure up to MPa (0 bar) Flow rate up to 000 l/min 0 Return fi lters Introduction FILTER SIZING INDEX CALCULATION CORRECTIVE FACTOR Page Introduction Calculation
More informationCV3000 Series. Characterized Insert Control Valves
CV3000 Series Characterized Insert Control Valves The CV3000 Series is a v-type control valve for precise control allowing high pressure drop capability with straight-through flow and bubble-tight shut
More informationMetal oil filler and air breather filler caps. Bayonet connection. Reservoir holes. TA46 B (Materials)
Metal oil filler and air Series T 46 4 5 6 4 ayonet connection Ø 46 7 8 46 Reservoir holes T46 (Materials) M5 - Cover: Chrome Plated Steel - Filter element: Impregnated paper Polyurethane 64-6 - Flange:
More information