D-POWER END MILLS END MILLS
|
|
- Marian Wiggins
- 6 years ago
- Views:
Transcription
1 0 YEDP DPOWE END S 7 9 DPOWE END S DIAMOND COATED CABIDE END S FO & COMPOSITE MATEIALS 9 HEAD OFFICE, Sewolcheonro, Bupyeonggu, Incheon, Korea PHONE : +9, FAX :+7 yg@yg.kr Tool specifications are subject to change without prior notice. 7 YGYEDP0 9 D FOIAM ON G D AP CO HI AT TE E &DC CO A M BI PO D SI E E TE ND M M AT IL E LS IA LS 7
2 CBN Ball End Mill V7 Mill TESTⅠ DPOWE CFP DUAL HELIX CUTTING CONDITION X End Mill Tools : Flute, Dual Helix Size : Ø() Work Material : CFP.P.M : 7, rev./min. Feed :, mm/min. Cutting Depth : Axial : mm adial :. mm Coolant : Dry Cut Overhang : 9 mm Milling Method : Side Cutting Machine : Machining Center DPower End Mill Multi Drill Dream Drill YG (Total Milling Length 0m) Competitor A (Total Milling Length 0m) TankPower End Mill HSS End Mill TESTⅡ DPOWE CFP FLUTE YG Competitor 0 CUTTING CONDITION ThrowAway Spade Drill Inserts Milling Length( m) Combo Tap YG (Total Milling Length m) Competitor A (Total Milling Length m) 00 0 Tools : Flute Size : Ø Work Material : CFP.P.M :, rev./min. Feed :, mm/min. Cutting Depth : Axial : mm adial :. mm Coolant : Dry Cut Overhang : mm Milling Method : Down & Side Cutting Machine : Machining Center
3 DPOWE CABIDE END S SELECTION GUIDE DIAMOND COATED CABIDE END S for ITEM MODEL DESCIPTION SIZE EI997 MIN MAX CABIDE, FLUTE, MINIATUE, NOSE with 0..0 PAGE ~7 Carbon Alloy Prehardened Hardened High Hardened ~HB HB~ Hc0~0 Hc0~ Hc~ Hc~ Copper Graphite Cast Iron Aluminum Stainless : Excellent : Good Titanium Inconel Acrylic CFP EIB9 CABIDE, FLUTE, MINIATUE, NOSE with 0. EI0 CABIDE, FLUTE, SHOT, NOSE with.0 9 EI CABIDE, FLUTE, LONG, NOSE with.0 EI CABIDE, FLUTE, LONG EACH, NOSE with.0 EI CABIDE, FLUTE, SHOT, NOSE with.0 EIB0 CABIDE, FLUTE, LONG with D0. D.0 EIB7 CABIDE, FLUTE, NOSE with TAPE EI99 CABIDE, FLUTE, MINIATUE, CONE ADIUS with D0. D.0 ~ EIB CABIDE, FLUTE, CONE ADIUS with TAPE D D 7 EIB CABIDE, FLUTE, CONE ADIUS with D.0 D.0 EIA CABIDE, FLUTE, 0 HELIX, SHOT, CONE ADIUS D D.0 9 EIA CABIDE, FLUTE, 0 HELIX, LONG, CONE ADIUS D D.0 DIAMOND COATED CABIDE END S for CFP ITEM MODEL DESCIPTION SIZE GUF0 MIN MAX CABIDE, MULTI FLUTE, DUAL HELIX D.0 D.0 PAGE Carbon Alloy Prehardened Hardened High Hardened ~HB HB~ Hc0~0 Hc0~ Hc~ Hc~ Copper Graphite Cast Iron Aluminum Stainless : Excellent : Good Titanium Inconel Acrylic CFP GUF9 CABIDE, FLUTE, HELIX D.0 D.0 phone:+9, fax:+7, yg@yg.kr phone:+9, fax:+7, yg@yg.kr
4 DPOWE CABIDE END S DPOWE * SIZE : Ø0.mm ~ Ømm * TYPE : Square, Ball, Corner adius * DESCIPTION : Higher hardness and superior wear resistance increase tool life significantly. High performance on Graphite, Wrought Aluminum, Bakelite, Plastics, Wood, Brass etc... DPOWE CFP * SIZE : Ø.0mm ~ Ømm * TYPE : Dual Helix, Low Helix * DESCIPTION : Higher hardness and superior wear resistance increase tool life significantly. High performance on Composite materials including CFP (Carbon Fiber einforced Plastics) DPOWE DIAMOND COATED CABIDE END S ICON GUIDE TOOL MATEIALS The tool is made of micro grain carbide. HELIX ANGLE Helix angle for Ball End Mills Helix angle for Square, Corner adius End Mills NUMBE OF FLUTES flute tool flute tool flute tool TYPE OF Plain Shank TYPE OF ING Side, Profile, Slot Diamond coating increases hardness and improves wearresistance for an extended tool life. Side, Profile ADIUS TOLEANCE mm phone:+9, fax:+7, yg@yg.kr YG DPower End Mill's ultra fine diamond coating ensures smooth and excellent surface finish on work materials. High performance on Graphite, Wrought Aluminium, Bakelite, Plastics, Wood, Brass... YG DPower has also excellent results in Nonferrous metals.
5 DPOWE FLUTE, MINIATUE, NOSE with FLUTE, MINIATUE, NOSE with DPOWE SEIES EI997 PLAIN SEIES EI997 PLAIN BELOW L OVEALL D BELOW L OVEALL D EI EI EI EI990 EI990 EI EI990 EI EI99 EI997 EI99000 EI99 EI990 EI99 EI997 EI9900 EI99 EI997 EI99 EI9900 EI9900 EI9900 EI990 EI EI9900 EI EI EI990 EI99000 EI99000 EI9900 EI EI EI99000 EI99000 DIA. TOLEANCE (mm) DIA. TOLEANCE 0~0.0 h EI MATEIAL PM = rev./min. phone:+9, fax:+7, yg@yg.kr phone:+9, fax:+7, yg@yg.kr7
6 DPOWE FLUTE, MINIATUE, NOSE with FLUTE, SHOT, NOSE with DPOWE SEIES EIB9 PLAIN SEIES EI0 PLAIN EIB000 EIB000 EIB000 EIB000 EIB000 EIB0 EIB0 EIB0 EIB0 EIB0 EIB EIB EIB BELOW L OVEALL D EI00 EI00 EI000 EI00 EI000 EI00 EI000 EI000 EI0 EI00 DIA. TOLEANCE (mm) DIA. TOLEANCE BELOW L. 7 0 OVEALL D DIA. TOLEANCE (mm) DIA. TOLEANCE 0~0.0 h 0~0.0 h EIB9 MATEIAL EI0 MATEIAL PM = rev./min. PM = rev./min. phone:+9, fax:+7, yg@yg.kr phone:+9, fax:+7, yg@yg.kr9
7 DPOWE FLUTE, LONG, NOSE with FLUTE, LONG EACH, NOSE with DPOWE SEIES EI PLAIN SEIES EI PLAIN EI EI EI EI EI EI EI0 EI EI EI BELOW L 0 0 OVEALL D EI0 EI00 EI00 EI0 EI00 EI0 EI00 EI0 EI EI BELOW L 0 0 OVEALL 0 0 D DIA. TOLEANCE (mm) DIA. TOLEANCE DIA. TOLEANCE (mm) DIA. TOLEANCE 0~0.0 h 0~0.0 h EI0 EI The FEED for Long & Long each types should be reduced by around % MATEIAL EI0 EI The FEED for Long & Long each types should be reduced by around % MATEIAL PM = rev./min. PM = rev./min. phone:+9, fax:+7, yg@yg.kr phone:+9, fax:+7, yg@yg.kr
8 DPOWE FLUTE, SHOT, NOSE with FLUTE, LONG with DPOWE SEIES EI PLAIN SEIES EIB0 PLAIN SQUAE EI EI EI EI EI EI EI EI0 EI EI0 DIA. TOLEANCE (mm) DIA. TOLEANCE 0~0.0 h EI0 EI MATEIAL BELOW L OVEALL D EIB000 EIB EIB00000 EIB00000 EIB00000 EIB000 EIB00 EIB00 EIB00 EIB0000 EIB00 EIB0000 EIB00 EIB0000 EIB0000 EIB0000 EIB0000 EIB00 EIB0 EIB000 DIA. TOLEANCE (mm) DIA. TOLEANCE 0~0.0 h EIB0 0 0 The FEED for Long & Long each types should be reduced by around % 0.D D BELOW L MATEIAL OVEALL D PM = rev./min. PM = rev./min. phone:+9, fax:+7, yg@yg.kr phone:+9, fax:+7, yg@yg.kr
9 DPOWE FLUTE, NOSE with TAPE FLUTE, MINIATUE, CONE ADIUS with DPOWE SEIES EIB7 PLAIN SEIES EI99 PLAIN ADIUS EIB EIB7 EIB7 EIB EIB7 EIB7 EIB EIB7 EIB7 DIA. TOLEANCE (mm) DIA. TOLEANCE 0~0.0 h EIB7 MATEIAL 0. BELOW L OVEALL TAPE ANGLE θ EI90000 EI EI EI90 EI900 EI90 EI900 EI90 EI900 EI9 EI99 EI90 EI9 EI9 EI9 EI997 EI90 EI9 EI999 EI9 EI90 EI90 EI90 EI90 EI900 EI90 EI900 EI900 CONE ADIUS BELOW L OVEALL D PM = rev./min. phone:+9, fax:+7, yg@yg.kr phone:+9, fax:+7, yg@yg.kr
10 DPOWE FLUTE, MINIATUE, CONE ADIUS with FLUTE, CONE ADIUS with TAPE DPOWE ADIUS SEIES EI99 PLAIN SEIES EIB PLAIN ADIUS EI90 EI9000 EI9000 EI900 EI90000 EI90000 EI9000 EI90000 CONE ADIUS BELOW L OVEALL D EIB0 EIB EIB0 EIB EIB0 EIB DIA. TOLEANCE (mm) CONE ADIUS DIA. TOLEANCE BELOW L OVEALL TAPE ANGLE θ 0 DIA. TOLEANCE (mm) DIA. TOLEANCE 0~0.0 h 0~0.0 h EI99 MATEIAL EIB MATEIAL D D 0.D 0.D PM = rev./min. PM = rev./min. phone:+9, fax:+7, yg@yg.kr phone:+9, fax:+7, yg@yg.kr7
11 DPOWE FLUTE, CONE ADIUS with FLUTE, 0 HELIX, SHOT, CONE ADIUS DPOWE ADIUS ADIUS SEIES EIB PLAIN SEIES EIA PLAIN EIB00 EIB00 EIB EIB EIB EIB EIB EIB0 EIB EIB EIB7 CONE ADIUS BELOW L OVEALL D EIA EIA EIA EIA EIA EIA0 EIA EIA0 DIA. TOLEANCE (mm) DIA. TOLEANCE CONE ADIUS OVEALL 0 0 DIA. TOLEANCE (mm) DIA. TOLEANCE 0~0.0 h 0~0.0 h EIB MATEIAL D EIA MATEIAL D D 0.D PM = rev./min. PM = rev./min. phone:+9, fax:+7, yg@yg.kr phone:+9, fax:+7, yg@yg.kr9
12 DPOWE FLUTE, 0 HELIX, LONG, CONE ADIUS ADIUS SEIES EIA PLAIN CONE ADIUS OVEALL EIA EIA EIA EIA EIA EIA0 EIA EIA DIA. TOLEANCE (mm) DIA. TOLEANCE 0~0.0 h EIA The FEED for Long & Long each types should be reduced by around % MATEIAL D D PM = rev./min. phone:+9, fax:+7, yg@yg.kr
13 DPOWE CFP DIAMOND COATED CABIDE END S S pecial design for Composite materials including CFP (Carbon Fiber einforced Plastics) in Automotive, Power Generation and Aerospace industries. educes delamination and burrs during machining allowing excellent surface finishes. E xcellent abrasion resistance and high thermal properties protect the cutting edge from excessive heat, allowing a longer tool life and improved performance in surface finishes.
14 DPOWE CFP MULTI FLUTE, DUAL HELIX FLUTE, HELIX DPOWE CFP SEIES GUF0 PLAIN SEIES GUF9PLAIN GUF000 GUF000 GUF0 GUF00 CONE ADIUS (l) () () () () OVEALL 0 No. of Flute GUF0 GUF0 GUF9 GUF CONE ADIUS OVEALL 0 DIA. TOLEANCE (mm) DIA. TOLEANCE DIA. TOLEANCE (mm) DIA. TOLEANCE 0~0.0 h 0~0.0 h GUF0 GUF9 MATEIAL CFP GFP CFP GFP MATEIAL CFP GFP CFP GFP D D D D 0.D 0.0D 0.D 0. D PM = rev./min. FEED = mm/min. PM = rev./min. FEED = mm/min. phone:+9, fax:+7, yg@yg.kr phone:+9, fax:+7, yg@yg.kr
15 MEMO Challenge toward a Global Leader YG Leading through Innovation YG's extensive global network allows products to be delivered on time to customers anywhere in the world to maximize satisfaction. As a global leader, YG faces adversity, but thanks to its management philosophy, YG will always rise above competition challenging the world and bringing innovation. DPOWE CABIDE END S
55% OFF CARBIDE HIGH SPEED STEEL COBALT. Phone: (616) Toll-Free: Fax: (616) cbdekorne.com
CARBIDE HIGH SPEED STEEL COBALT Phone: () - Toll-Free: -00--0 Fax: () - cbdekorne.com PLEASE TAKE % OFF PRINTED S END MICRO END THREAD COUNTER SINKS CHAMFER DRILL TAPS & DIES OUR COMMITMENT TO YOU...
More informationHSS. Being the best through innovation HAND TAPS. - General Tapping
Being the best through innovation HAND - General Tapping SELECTION GUIDE HAND General Tapping, HSS HAND ED No. MODEL Material Standard Work Material Dimensions Tolerance Chamfer Surface Treatment AGE T0
More informationPRODUCT CATALOG
www.engman-taylor.com 0 PRODUCT CATALOG OUR COMMITMENT TO YOU... 00% MADE PREMIUM INDUSTRIAL QUALITY PRODUCTS % ORDER FULFILLMENT SAME DAY SHIPPING NO MINIMUM ORDER REQUIREMENTS EXCEPTIONAL QUALITY CONTROL
More informationYour Cutting Tool Solution for END MILLS
Your ting Tool Solution for END MILLS END MILLS / VISUAL INDE AQUA V MILL FOUR FLUTE Viable AQ Mill h V List 970 List 970 NEW List 970 List 970 AQUA V MILL FIVE FLUTE CORNER RADIUS Viable AQ Mill h V List
More informationAEROSPACE DIE & MOLD MACHINE TOOL INDUSTRY MEDICAL END MILLS HIGH-PERFORMANCE CARBIDE DRILLS A PRODUCT OF KENNAMETAL INC.
AEROSPACE DIE & MOLD MACHINE TOOL INDUSTRY MEDICAL END MILLS HIGH-PERFORMANCE DRILLS A PRODUCT OF KENNAMETAL INC. INCH VERSION TOOLS Hanita Cutting Tools is recognized as one of the world's leading manufacturers
More informationTAKE 55% OFF ALL LIST PRICES IN CATALOG!
YOUR # SOURCE FOR AMERICAN-MADE PREMIUM CUTTING TOOLS % OFF ALL S IN CATALOG! ENDMILLS MICRO ENDMILLS THREADMILLS DRILLS TAPS & DIES CHAMFER MILLS DRILL MILLS BURS COUNTERSINKS REAMERS Our commitment to
More informationDRILLS END MILLS TAPS
DRILLS END MILLS TAPS Contributing to Progress in the World of Product Manufacturing NACHI Cutting Tools NACHI-FUJIKOSHI CORP. is a pioneer of precision cutting tools in Japan and one of the leading manufacturers
More informationIASF/ASF. New Generation Face Mill Dramatically Reduces Roughing Time FEATURES
New Generation Face Mill Dramatically Reduces Time FEATURES 2-5 times better roughing efficiency than conventional face mills Very stable performace in interrupted cutting Extraordinary metal removal and
More informationl n ~ 7.5xD No. 446 Epoch CBN-EHB
D 0. l n ~ 7.5xD D 0.6 ± 0.003 mm h4 shank No. 446 Epoch CBN-EHB CBN-EHB Epoch CBN High Precision Ball End Mill Features Newly designed low cutting force high-strength flute shape Helix flute design for
More informationNAIL SECTION TABLE OF CONTENTS
NAIL SECTION TABLE OF CONTENTS ANCHOR TRUSS BOX NAILS-1 NAILS-1 COMMMON NAILS-1 & 2 DECK NAILS NAILS-2 & 3 DRYWALL DUPLEX FINISH FLOOR - HARD SCREW NAILS-4 NAILS-4 NAILS-5 NAILS-5 MASONRY - STUB NAILS-6
More informationIR 40. Non-Contact Infrared Temperature Sensor/Transmitter. Temperature Range: 0~1000
Non-Contact Infrared Temperature Sensor/Transmitter Temperature Range: 0~1000 IR 40 C-910C, Bupyeong Woolim Lion s Valley, #425, Cheongcheon-Dong, Bupyeong-Gu, Incheon, Korea TEL: +82-32-623-7507 FAX:
More informationHone Heads. HB Type ø mm ( )
Hone Heads HB Type ø 76 1 375 mm (2.99 54.13 ) HB Tooling ø 76-205 mm (2.99 8.07 inch) Be diameter HONE HEADS f stock removal rate in soft steel up to 750 cm 3 /h (45.78 inch 3 /h) Machine coupling Shaft
More informationClausing Industrial, Inc. Variable Speed 20" Single and Multi-spindle, Belt Drive Industrial Drill Presses
www.clausing-industrial.com Variable Speed 20" Single and Multi-spindle, Belt Drive Industrial Drill Presses Clausing Industrial, Inc. Two Speed Variable Speeds 150-2000rpm Variable Speeds 200-1300rpm
More informationMCS Machine Construction System. 30 x 30 see page 5. 40LR see page x 90L. see page x 80L see page 12
A M M P F M Machine onstruction ystem x see page 4 x see page 4 30 x 30 see page 5 30 x 60 see page 5 x see page 6 x see page 6 x 80 see page 7 see page 7 x see page 8 x see page 8 x 60 see page 9 x 60
More informationAF SERIES AWEA MECHANTRONIC CO., LTD. High Performance Vertical Machining Center AGENT ISO 9001 ISO 14001
AWEA MECHANTRONIC CO., LTD. HEADQUARTERS 629, Suezhetou Section, Kwanpu Rd., Wenshan Li, Hsinpu, Hsinchu, Taiwan TEL : +886-3-88-191 FAX : +886-3-88-19 Website : www.awea.com CENTRAL TAIWAN SCIENCE PARK
More informationTAPS TiN TiN TiN TiN -
TAS TAS TAS Tool Type Standard Quality Coating age No HAND TAS IN SETS OF THREE FOR METRIC THREAD HAND TAS IN SETS OF THREE FOR METRIC THREAD HAND TAS IN SETS OF THREE FOR METRIC THREAD NR ILOT HAND TAS
More informationVariable Speed 20" Single and Multi-spindle, Belt Drive Industrial Drill Presses
www.clausing-industrial.com Variable Speed 20" Single and Multi-spindle, Belt Drive Industrial Drill Presses Two Speed Variable Speeds 150-2000rpm Variable Speeds 200-1300rpm Variable Speeds 300-2000rpm
More informationInfluence of Input Parameters on Characteristics of Electro Chemical Machining Process
International Journal of Applied Science and Engineering 23., : 3-24 Influence of Input Parameters on Characteristics of Electro Chemical Machining Process C. Senthilkumara,*, G. Ganesana, and R. Karthikeyanb
More informationProduct ranges HOMAPAL Metal and HOMAPAL Magnetic Boards
Decor Item Description [kg/m²] Material Finish = im at 205 Slate a,b 1,0 1,3 Melamine 8 0,3 80 012 205/000U Melamine black plain matt a,b 1,0 1,3 Melamine 8 0,3 80 012 211/000U Melamine green plain matt
More informationAppendix. A 1 Properties of areas.* *Symbols used are: A = area I = moment of inertia S = Section modulus
Appendix A 1 Properties of areas.* *Symbols used are: A = area I = moment of inertia S = Section modulus r = radius of gyration = I/A J = polar moment of inertia Z p = polar section modulus Circle R D
More informationAvailable online at ScienceDirect. Procedia CIRP 31 (2015 ) th CIRP Conference on Modelling of Machining Operations
Available online at www.sciencedirect.com ScienceDirect Procedia CIRP 31 (215 ) 316 321 15th CIRP Conference on Modelling of Machining Operations Comparative analysis of PCD drill designs during drilling
More informationAM M H R - M12
ALPHAMILL The Alpha mill series lineup makes high feed and deep depth of cut machining possible with a variety of insert sizes. The new series provides use of an extra short edge and provides for high
More informationMATHEMATICAL MODEL FOR DRILLING CUTTING FORCES OF 40CrMnMoS8-6 STEEL
Bulletin of the Transilvania University of Braşov Series I: Engineering Sciences Vol. 5 (54) No. 1-2012 MATHEMATICAL MODEL FOR DRILLING CUTTING FORCES OF 40CrMnMoS8-6 STEEL I. BĂDAN 1 Gh. OANCEA 1 M. VASILONI
More informationW W W. T Y G. C O M. M X
T O O L I N G E Q U I P M E N T S H A R M E N I N G S E R V I C E R E A M E R S D R I L L S E N D M I L L S D R I V E S S P I N D L E R E P A I R S E R V I C E B A L L S C R E W S E R V O S B A N D S A
More informationIdentification Number
Identification Number The specification of Micro Linear Way LWL is specified by the identification number, which consists of a model code, a size, a part code, a preload symbol, a classification symbol,
More informationEXPERIMENTAL ANALYSIS ON DE-LAMINATION IN DRILLING GFRP COMPOSITE MATERIAL
EXPERIMENTAL ANALYSIS ON DE-LAMINATION IN DRILLING GFRP COMPOSITE MATERIAL N.Parkunam 1, G.Gopi 2, Dr.D.Threshkumar 3 1 PG Scholar, PTR College of Engineering and Technology, Madurai, Tamilnadu, (India)
More informationSUMICRYSTAL CD blanks are Single Crystal Diamond blanks for Wire Drawing Dies. Wire Drawing Die Blanks
SUMICRYSA CD SUMICRYSA CD blanks are Single Crystal Diamond blanks for Wire Drawing Dies Wire Drawing Die Blanks Features : High purity synthetic single crystal diamond blanks Constant high quality Excellent
More informationOPTIMIZATION ON SURFACE ROUGHNESS OF BORING PROCESS BY VARYING DAMPER POSITION
OPTIMIZATION ON SURFACE ROUGHNESS OF BORING PROCESS BY VARYING DAMPER POSITION Wasis Nugroho, Nor Bahiyah Baba and Adi Saptari Faculty of Manufacturing Engineering Technology, TATI University College,
More informationOptimization of Radial Force in Turning Process Using Taguchi s Approach
5 th International & 6 th All India Manufacturing Technology, Design and Research Conference (AIMTDR 04) December th 4 th, 04, IIT Optimization of Radial Force in Turning Process Using Taguchi s Approach
More informationGraphite. Graphite
igh-performance en mills with CV iamon coating for of graphite. ochleistungs-schaftfräser mit CV-iamant Beschichtung für ie von Graphit. 115-124 www.nkotool.com 115 ew ew ew Tool coe GE 235 GEL 435 GBLS
More informationDISCONTINUED PRECISION MEASURING FOWLER CALIPERS 1 - VERNIER CALIPERS 4 - ELECTRONIC CALIPERS
FOWLER CALIPERS 1 - VERNIER CALIPERS 4 - ELECTRONIC CALIPERS 52-058-016 Fine quality vernier calipers are constructed of stainless steel. 52-057-004 offers 3-way measurement to accuracy. 52-058-XXX series
More informationHigh Speed Turning of Titanium (Ti-6Al-4V) Alloy. Anil Srivastava, Ph.D. Manager, Manufacturing Technology TechSolve, Inc., Cincinnati, OH 45237
High Speed Turning of Titanium (Ti-6Al-4V) Alloy Anil Srivastava, Ph.D. Manager, Manufacturing Technology TechSolve, Inc., Cincinnati, OH 45237 Outline Applications of Titanium Alloys Technical Difficulties
More informationAn investigation of material removal rate and kerf on WEDM through grey relational analysis
Journal of Mechanical Engineering and Sciences ISSN (Print): 2289-4659; e-issn: 2231-8380 Volume 12, Issue 2, pp. 3633-3644, June 2018 Universiti Malaysia Pahang, Malaysia DOI: https://doi.org/10.15282/jmes.12.2.2018.10.0322
More informationMetal core drills the most cost-effective drilling experience.
Metal core drilling Metal core drills the most cost-effective drilling experience. Core drilling is an extremely efficient process: faster, quieter and more accurate than twist drilling. And since core
More informationExternal Micrometers. C-1
External Micrometers www.tesatechnology.com C-1 External Micrometers Precision Measurement Precision measurement requires the use of micrometers. In 1848, the first measuring tool of this type was patented
More informationSimply enhancing life with light
Simply enhancing life with light Since 1970, we ve handcrafted our products to a superior standard of quality and craftsmanship, using only the finest raw materials, components and finishes available.
More informationElectronic Indicators / Dial Gauges / Dial Test Indicators (Lever-Type)
Electronic Indicators/Dial Gauges/Dial Test Indicators (Lever-Type) Electronic Indicators / Dial Gauges / Dial Test Indicators (Lever-Type) E-1 DIN 2270 NF E 11-053 TESATAST Dial Test Indicators (Lever-Type)
More informationOptimization of Process Parameters in CNC Drilling of EN 36
Optimization of Process Parameters in CNC ing of EN 36 Dr. K. Venkata Subbaiah 1, * Fiaz khan 2, Challa Suresh 3 1 Professor, Department of Mechanical Engineering, Andhra University, Visakhapatnam, Andhra
More informationSGF. The metric thread forming connection
SGF The metric thread forming connection Schriever SGF Our challenge: An economical solution Alication: Direct connections in cylindrical bores and casted bores. Schriever SGF -screws are metric thread-forming,
More informationFerrite Cores for Induction Welding
2005 Product Line atalog Ferrites and ssemblies for High Frequency Induction Welding Subsidiary of TT electronics plc Ferrite ores for Induction Welding F59 Typical Performance urves Ferrite Impeder Materials
More informationCUTTING MECHANICS AND SURFACE FINISH FOR TURNING WITH DIFFERENTLY SHAPED CBN TOOLS
A R C H I V E O F M E C H A N I C A L E N G I N E E R I N G VOL. LXIV 2017 Number 3 DOI: 10.1515/meceng-2017-0021 Key words: hardened steel, surface roughness, cutting force, specific energy, corner radius
More informationDial Test Indicators SERIES 513
Dial Test s SERIES 513 Narrow or deep places, which cannot be measured with a normal dial gauge, can be easily and accurately measured. Mitutoyo's proprietary new structure permits smooth pointer operation.
More informationTap Changer Type MHF III Specification, Assembly and Materials
Tap Changer Type MHF III Specification, ssembly and Materials Descriptions General Specifications Remarks available in one, two or three phase applications shaft length available in variable sizes connection
More informationDEVELOPMENT OF AN ELECTRO CHEMICAL MACHINE SET-UP AND EXPERIMENTATIONS
DEVELOPMENT OF AN ELECTRO CHEMICAL MACHINE SET-UP AND EXPERIMENTATIONS Aniket Jadhav 1, Kishor D. Patil, D. B. Jadhav 3, W. G. Kharche 4 1 M.Tech.Student, Mechanical Engineering Department, B.V.D.U.C.O.E.
More informationOptimization Of Process Parameters In Drilling Using Taguchi Method
Optimization Of Process Parameters In Drilling Using Taguchi Method 1 P.Surendra, 2 B.Krishna Murthy, 3 M.V.Kiran Kumar 1 Associate Professor, 2 Assistant Professor, 3 Assistant Professor Department of
More informationMetal core drills Experience the most cost-effective drilling.
Metal core drillg Metal core drills Experience the most cost-effective drillg. Core drillg is an extremely efficient process: faster, quieter and more accurate than twist drillg. And sce core drillg requires
More informationWenzhou Tripod Instrument Manufacturing Co., Ltd.
Wenzhou Tripod Instrument Manufacturing Co., Ltd. Website: http://aliyiqi.en.alibaba.com http://www.wzydyq.com/english/ Phone: 86-577-57572515 57572515 Fax: 86-577-57572516 57572516 E-mail: aliyiqi@gmail.com
More informationIR 80-H. Non-Contact Infrared Temperature Sensor/Transmitter. Temperature Range: 500~1700
Non-Contact Infrared Temperature Sensor/Transmitter Temperature Range: 500~1700 IR 80-H C-910C, Bupyeong Woolim Lion s Valley, #425, Cheongcheon-Dong, Bupyeong-Gu, Incheon, Korea TEL: +82-32-623-7507 FAX:
More informationDetermination of Machining Parameters of Corn Byproduct Filled Plastics
Paper 99, IT 3 Determination of Machining Parameters of Corn Byproduct Filled Plastics Kurt A. osentrater, Ph.D. Lead Scientist, Agricultural and Bioprocess Engineer, USDA, Agricultural esearch Service,
More informationBall Reverser. Ball Reverser Actuator. FLENNOR Power Transmission Products. Patented
Ball Reverser FLENNOR Power Transmission Products Ball Reverser Actuator Patented Ball Reverser Principle General Information NORCO'S Ball Reverser Actuator is a unique actuator which provides automatic
More informationSolution for Homework #4. Chapter 21: Multiple Choice Questions (21.3, 21.4, 21.6, 21.8) Problems (21.10, 21.21, 21.20, 21.35)
Solution for Homework #4 Chapter 21: Multiple Choice Questions (21.3, 21.4, 21.6, 21.8) Problems (21.10, 21.21, 21.20, 21.35) 21.3 (d) 21.4 (c) 21.6 (c) 21.8 (a) 21.10 Solution: (a) φ = tan-1(.5 cos 20/(1
More informationWIP201610P L Series Engineering Specification
RoHS Pb WIP16P L Series Engineering 1. Scope Feature High saturation current realized by material properties and structure design Low DC resistance to achieve high conversion efficiency and lower temperature
More informationT1500Z. General Purpose Coated Cermet for Steel Turning
TOOLING NEWS E-125 P M K N S H General Purpose Coated Cermet for Steel Turning Brilliant Coat for glossy finished surface and excellent wear resistance Expanded chip breaker lineup with newly developed
More informationECE201 Electron Devices. Presented by K.Pandiaraj ECE Kalasalingam University
ECE201 Electron Devices Presented by K.Pandiaraj ECE Kalasalingam University Atom Atoms are the main building blocks of matter. All the materials are made up of very small particles called atoms. For example
More informationTESA MICROMASTER Electronic Micrometers with Digital Display
TESA MICROMASTER Electronic Micrometers with Digital Display DIN 86 T1 0,001 0.00005 in Metric/Inch conversion 100 : Ø 6,5 > 100 : Ø 8 With patented TESA capa µ system Measuring span of 0 or 25. Large
More information411 Steel Couplings. 411 Steel Couplings--Standard Length Sleeves 1/2 thru 12 Steel Pipe Sizes. Sleeve Thk. X Lgth. In.
Steel Couplings 0/0 Steel Couplings--Standard Length s 1/ thru Steel Pipe Sizes Nom. Pipe Size 1/ / 1 1 1 1/ Pipe.0 1.0 1. 1. 1.90.00.... Buna-N Gasket -000001-00 -00001-00 -00011-00 -00001-00 -00019001-00
More informationWIP252012P L Series Engineering Specification
RoHS Pb WIP212P L Series Engineering 1. Scope Feature High saturation current realized by material properties and structure design Low DC resistance to achieve high conversion efficiency and lower temperature
More informationOptimization of Machining Parameters in ECM of Al/B4C Composites Using Taguchi Method
International Journal of Applied Science and Engineering 2014. 12, 2: 87-97 Optimization of Machining Parameters in ECM of Al/B4C Composites Using Taguchi Method S. R. Rao a* and G. Padmanabhan b a Department
More informationELECTRIC DISCHARGE MACHINING AND MATHEMATICAL MODELING OF Al-ALLOY-20 % SiC p COMPOSITES USING COPPER ELECTRODE
International Journal of Mechanical and Production Engineering Research and Development (IJMPERD ) ISSN 2249-6890 Vol.2, Issue 2 June 2012 37-46 TJPRC Pvt. Ltd., ELECTRIC DISCHARGE MACHINING AND MATHEMATICAL
More informationMagnetic Field Characteristics of the Flat Type Electro-Magnetic Barrel Finishing Machine O. Sugiura
Key Engineering Materials Online: 2004-02-15 ISSN: 1662-9795, Vols. 257-258, pp 515-520 doi:10.4028/www.scientific.net/kem.257-258.515 2004 Trans Tech Publications, Switzerland Magnetic Field Characteristics
More informationEngineering innovation through Advanced Materials and Technology. A wholly owned subsidiary of The Morgan Crucible Company PLC
Engineering innovation through Advanced Materials and Technology A wholly owned subsidiary of The Morgan Crucible Company PLC Unraveling the Commutation Mystery DC Machine Basics Machine Adjustments Carbon
More informationChapter 11 Design of Low Friction Surfaces
Chapter 11 Design of Low Friction Surfaces 1 Design of Low Friction Surfaces (no lubricant allowed) Consider the task of creating low friction surfaces for sliding applications. FR 1 = Support the normal
More informationOptimization of Machining Process Parameters in Drilling of
Optimization of Machining Process Parameters in Drilling of CFRP Using Multi-Objective Taguchi Technique, TOPSIS and RSA Optimization of Machining Process Parameters in Drilling of CFRP Using Multi-Objective
More informationINTRODUCING HORIZONTAL
i n t r o d u c t i o n. INTRODUCING HORIZONTAL A W I D E R A N G E O F PA N E L S, S YS T E M C O M P O N E N T S A N D A C C E S S O R I E S TO C O M B I N E F O R A W E L L D E S I G N E D S E L L I
More informationClocks Price List. All prices shown excluding VAT
Revision 1113.1 Clocks Price List All prices shown excluding VAT Clocks Each of our clocks comprises of a Dial, Pair of Hands, Mechanism and all of the basic cabling required for you to complete a standard
More informationCoordinate Measuring Machines Coordinate INDEX Measuring Machines Coordinate Measuring Machines New Products
Coordinate Measuring Machines Coordinate Measuring Machines New Products INDEX Coordinate Measuring Machines Crysta-Apex Series L-2, 3 LEGEX Series L-4 Bright-STRATO Series L-5, 6 CP Series L-6 CARBstrato
More informationExperimental study of electrical discharge drilling of stainless steel UNS S30400
IOP Conference Series: Materials Science and Engineering PAPER OPEN ACCESS Experimental study of electrical discharge drilling of stainless steel UNS S30400 To cite this article: E A H Hanash and M Y Ali
More informationGear Finishing with a Nylon Lap
Gear Finishing with a Masahiko Nakae Kazunori Hidaka Yasutsune Ariura Toshinori Matsunami Masao Kohara Dr. Masahiko Nakae is a pressor in the department mechanical engineering, Sasebo National College
More informationExperimental Investigation and Analysis of Machining Characteristics in Drilling Hybrid Glass-Sisal-Jute Fiber Reinforced Polymer Composites
5 th International & 26 th All India Manufacturing Technology, Design and Research Conference (AIMTDR 2014) December 12 th 14 th, 2014, IIT Guwahati, Assam, India Experimental Investigation and Analysis
More informationSurface-mounting thermostats Series ATH
JUMO GmbH & Co. KG Delivery address:mackenrodtstraße 14, 36039 Fulda, Germany Postal address: 36035 Fulda, Germany Phone: +49 661 6003-0 Fax: +49 661 6003-607 E-mail: mail@jumo.net Internet: www.jumo.net
More informationMicrosoft Excel Directions
Microsoft Excel Directions 1. Working in groups of two, log onto a computer. 2. Create a folder on the desktop a. Right click anywhere on the desktop new folder Name the folder Chemistry 3. Open MS Excel
More informationStudy on Mechanism of Magnetic Abrasive Finishing Process using Low - Frequency Alternating Magnetic Field Jinzhong Wu1, a, Yanhua Zou1, b
International Conference on Electromechanical Control Technology and Transportation (ICECTT 2015) Study on Mechanism of Magnetic Abrasive Finishing Process using Low - Frequency Alternating Magnetic Field
More informationTisa Enterprises. The Clamping Professionals
Flat Strap Clamp Material: Medium carbon steel, Hardened and Tempered : T1-FSC IS: - 4 D x L A B K S T1-FSC- x 0. T1-FSC- x 0. T1-FSC- x 0. T1-FSC-1 x 1 0. T1-FSC-1 x 1 M 1.00 T1-FSC-1 x 0 M 1. T1-FSC-0
More information*These are the vinyl for MAX Bepop Cutting/printing machines. We have 100mm (4in) and 200mm(8in) width models available in North America.
The English translation of Bepop standard vinyl (indoor use) technical datasheet 100mm (4in) / 200mm (8in) width Color 100mm(4in) width 200mm(8in) width Black SL-S111N Black SL-S201N Black White SL-S112N
More informationPost Graduate Scholar, Department of Mechanical Engineering, Jalpaiguri Govt. Engineering College, India. 2
International Journal of Technical Research and Applications e-issn: 30-8163, www.ijtra.com Volume 3, Issue 3 (May-June 015), PP. 5-60 INFLUENCE OF CONTROL PARAMETERS ON IN ELECTRICAL DISCHARGE MACHINING
More informationBindzil for hard surface cleaners. Colloidal silica dispersions uses and benefits
Bindzil for hard surface cleaners Colloidal silica dispersions uses and benefits Product overview Bindzil colloidal silica dispersions Add value to your cleaners Bindzil water-based colloidal silica dispersions
More informationDial Test Indicators Comparison measuring instruments which ensure high quality, high accuracy and reliability.
Dial Test s Comparison measuring instruments which ensure high quality, high accuracy and reliability. SERIES 513 Lever-Type Dial s eature icons Designed to probe surfaces that cannot be reached with a
More informationProdukt Information. Ultra Low Ohm (Metal Strip) Chip Resistor (LR Series) Scope. Features. Applications. Construction
Scope Ultra Low Ohm (Metal Strip) Chip Resistor (LR Series) -This specification applies to all sizes of rectangular-type fixed chip resistors with alloy as mater. Features -High power rating up to 3 Watts
More informationME 207 Material Science I
ME 207 Material Science I Chapter 3 Properties in Tension and Compression Dr. İbrahim H. Yılmaz http://web.adanabtu.edu.tr/iyilmaz Automotive Engineering Adana Science and Technology University Introduction
More informationAluminum Trace Printed Circuit Board: Case Study
Aluminum Trace Printed Circuit Board: Case Study The research team at D-Wave Systems needed a PCB that could operate in cryogenic environments at 500 mk above absolute zero while retaining superconductivity.
More informationUniclass L4181. EPIC D181 CI/SfB. 11th edition
Uniclass L4181 EPIC D181 CI/SfB (31.59) Xt7 11th edition recess leather cabinet handles recess leather cabinet handles CNC machined solid brass recessed with flush fitted bonded bridle leather Custom lengths
More informationMRI Flocculation. MRI Flocculation Systems. Mix & Match for Maximum Pretreatment Control
MRI Flocculation MRI Flocculation Systems Mix & Match for Maximum Pretreatment Control MRI Flocculation P resenting MRI m a n u f a c t u r e s v e r t i c a l t u r b i n e s (s h o w n ), h o r i z o
More informationSAVE UP TO 30% 2016 PRODUCT PROMOTION FULLY CALIBRATED 2 YEAR WARRANTY DISTRIBUTED BY:
SAVE UP TO 30% 2016 PRODUCT PROMOTION FULLY CALIBRATED 2 YEAR WARRANTY DISTRIBUTED BY: PRICING EXTENDED UNTIL SEPTEMBER 30, 2018 Empowering Possibilities Precision is not only defined by degrees of exactness.
More informationHigh Tech High Top Hat Technicians. An Introduction to Solid Mechanics. Is that supposed to bend there?
High Tech High Top Hat Technicians An Introduction to Solid Mechanics Or Is that supposed to bend there? Why don't we fall through the floor? The power of any Spring is in the same proportion with the
More informationALUMINUM ELECTROLYTIC CAPACITORS REFERENCE SHEET
TO Messrs. AVNET ABACUS ALUMINUM ELECTROLYTIC CAPACITORS REFERENCE SHEET CUSTOMER PART No. Rubycon PART No. 35 TLV 470 M 12.5X13.5 DRAWING No. RERS 011758 ISSUE No. 1 ISSUE DATE 25 AUGUST 2010 ENGINEERING
More informationMolding Power Inductor
Marking Outline: Magnetic shielded structure: excellent resistance to electro magnetic interference(emi). A composite structure, ultra low buzz noise. Low loss, high efficiency, wide application frequency.
More informationINPAQ. Specification. WIP252012S L Series. Product Name. Power Inductor. Size EIAJ Global RF/Component Solutions
WIP252012S L Series Specification Product Name Series Power Inductor WIP252012S L Series Size EIAJ 2520 WIP252012S L Series Engineering Specification 1. Scope Feature High saturation current realized by
More informationGerman Engineering with an American Hand
FLUTE FLUTE FLUTE German Engineering with an American Hand FLUTE FLUTE FLUTE FLUTE FLUTE FLUTE Variable EndMills IDEAL FOR HIGH-SPEED MACHINING (HSM) Flute Variable - Eliminates Harmonics Flauta Variable
More informationCFS. Structure of MINICAM series. MINICAM series. Metric series. Miniature series
MIIAM seies ae compactly designed cam ollowes with the stud diamete 2 to and the outside diamete. to 1. They ae suitable o use as ollowe beaings in lightly loaded high pecision cam mechanisms and linea
More informationSL27C SL32C. ScreenLine. Technical Catalogue. english. double-glazed unit 27 mm 32 mm
VENETIAN SL27C SL32C BLIND english Technical Catalogue double-glazed unit 27 mm 32 mm dimensions technical specification SL27C SL32C System C C SL27C VENETIAN SL32C BLIND The venetian blinds SL27C and
More informationDetermining Machining Parameters of Corn Byproduct Filled Plastics
Iowa State University From the SelectedWorks of Kurt A. Rosentrater 8 Determining Machining Parameters of Corn Byproduct Filled Plastics Kurt A. Rosentrater, United States Department of Agriculture Andrew
More informationYour partner in Science!
Your partner in Science! Your partner in Science! Laser Diffraction Particle Size Distribution Analyzer LA-960 Simple, Powerful, Reliable 10 nm - 5 mm The LA-960 features intuitive software, unique accessories,
More informationSnow Removal & Road Maintenance Products
Snow Removal & Road Maintenance Products Introducing Kennametal I.C.E.-Series Isolated Carbide-Edged s engineered specifically to last exceptionally long in even the most challenging road conditions! I.C.E.
More informationNickel-Plated Brass Push-In Fittings - NPTF/INCH
/INCH Tube Connections: External /8, 5/32, /4, 5/6, 3/8, /2 Thread Connections 0-32 UNF, /8, /4, 3/8, /2 Reusable thread seal, PTFE seal ring (Teflon ) - Pro-Fit Standard - Camozzi s all metal fittings
More informationTable of Content. Mechanical Removing Techniques. Ultrasonic Machining (USM) Sputtering and Focused Ion Beam Milling (FIB)
Table of Content Mechanical Removing Techniques Ultrasonic Machining (USM) Sputtering and Focused Ion Beam Milling (FIB) Ultrasonic Machining In ultrasonic machining (USM), also called ultrasonic grinding,
More informationNew! 2010 Model. Model No
Model No. 15945 New! 2010 Model Features: Model #15945 is an advanced lightweight ultrasonic thickness gage that is designed to be convenient to use and rugged enough to operate in harsh environments.
More informationHave a look at the following video which shows an invention developed in the High-Low Tech Lab at MIT.
Have a look at the following video which shows an invention developed in the High-Low Tech Lab at MIT. What is the special property of the ink the researchers have invented? We will investigate which materials
More informationA Numerical Approach on the Design of a Sustainable Turning Insert
Proceedings of the Pakistan Academy of Sciences: A. Physical and Computational Sciences 54 (4): 339 345 (2017) Copyright Pakistan Academy of Sciences ISSN: 2518-4245 (print), 2518-4253 (online) Pakistan
More informationOn The Temperature and Residual Stress Field During Grinding
On The Temperature and Residual Stress Field During Grinding S. M. H-Gangaraj, G. H. Farrahi and H. Ghadbeigi Abstract Grinding is widely used for manufacturing of components that require fine surface
More informationTE 75R RESEARCH RUBBER FRICTION TEST MACHINE
TE 75R RESEARCH RUBBER FRICTION TEST MACHINE Background: The Research Rubber Friction Test Machine offers the ability to investigate fully the frictional behaviour of rubbery materials both in dry and
More information