Tap Changer Type MHF III Specification, Assembly and Materials

Size: px
Start display at page:

Download "Tap Changer Type MHF III Specification, Assembly and Materials"

Transcription

1 Tap Changer Type MHF III Specification, ssembly and Materials Descriptions General Specifications Remarks available in one, two or three phase applications shaft length available in variable sizes connection diagrams (page ) can be applied in any variation to all types bolted on the supports welded under transformer cover and allow strong construction Steel Parts luminium Parts Materials available in stainless or mild steel mild steel parts are cadmium or zinc plated GISi(Cu) galvanizing upon request Brass Parts CuZn0Pb (CW7N) / F DIN 7 7 Copper Parts E - Cu F DIN 0 0 Insulator Parts Paper phenol - plastic resin based laminates, HP 0. class of DIN 77 Upon Request Current aluminum parts can be protected by anodic oxidation mild steel parts can be supplied in stainless steel brass and copper parts can be tin, silver or cadmium plated up to 0 B.I.L (other B. I. L. values are available upon customer request) 0 / 0 / 70 Operating Instructions For each operation, the handle must first be pulled axially in the direction of the user in order to be subsequently rotated to the desired position. fter being turned, the handle drops into the intended position by means of a high tension spring. Each position is precisely marked by a notch. This process is clearly marked on control knob as; LIFT - TURN - SWITCH ON (can be engraved in any language) Doc-Nr.: DT tap changer type MHF III_ENG Created: 0..0 Revised:.0.07 Language: ENG /

2 Control Devices Control Device No. MH 0 Control Device No. MH 0 * * dia. mm holes at 0 on dia. 0 mm 8 8 Ø dia. mm. holes at 0 on dia.0 mm 0 Ø00 Ø 0 9 ± 8 dia. mm. holes at 0 on dia.0 mm ± Ø00 0 plug-in standard type flange mounted permitted angular variation: permitted alignment variation: 8 mm plug-in with aluminium overall dimensions flange mounted permitted angular variation: permitted alignment variation: 8 mm Ø Ø Ø : MV Ø : MV * the hole on the shaft is drilled at parallel position with respect to the middle position of the tap changer * L min: 9 for MH 0 / 70 for MH 0 Doc-Nr.: DT tap changer type MHF III_ENG Created: 0..0 Revised:.0.07 Language: ENG /

3 H=0 Fixed Contacts MH 7 (Flag Type Contacts) MH 7 (Tubular Contacts) 0 H=0 0 ø 0 øj= øk= 0 0 Unless otherwise specified by the customer, flag type contacts are positioned as in the diagram above. The contact situated near the operating device is facing downwards. Doc-Nr.: DT tap changer type MHF III_ENG Created: 0..0 Revised:.0.07 Language: ENG /

4 Numbering of the Repeater Disc and Numbering Combinations Standard Numbering Numbering Combinations ø W min MHF III tap changers can be paired by superimposing several tap changers. Built steel brackets are assembled by nuts and bolts. Depending on which system is adopted, the user can: either operate the tap changers with one shaft or operate part of the tap changers with one shaft, and the other part with a second shaft. Note: It is essential, when ordering, to quote dimension W the minimum value of which to be set in each case depends on the insulation conditions and on the position of the different tap changers Numbering of the repeaters for rack and pinion drive B C D Doc-Nr.: DT tap changer type MHF III_ENG Created: 0..0 Revised:.0.07 Language: ENG /

5 Numbering Combinations Setting for delta transformer Setting for star transformer Setting for star with outer - earthed conductor transformer Star - delta coupling Typical combinations: Stage: series - parallel coupling Stage: delta diagram - setting ±, % Common output per phase Doc-Nr.: DT tap changer type MHF III_ENG Created: 0..0 Revised:.0.07 Language: ENG /

6 Delta Diagram / 0-0 / 00-0 / - Positions / Setting. % per Position (With luminium Support) & ø0 9 ø0 L e & 7 9 H 89 S T E F F F G F F F O F F F P B D Number of Positions B D E F G H O P S T & L e Unit No Depends on fixed contacts Please specify when ordering D7 D7 D7 D7 D7 D7 D7 D7 * L min: 9 for MH0 control device * L min: 70 for MH0 control device Doc-Nr.: DT tap changer type MHF III_ENG Created: 0..0 Revised:.0.07 Language: ENG /

7 L Series Parallel Coupling / 0-0 / 00-0 / Setting. % per Position (With luminium Support) 9 ø0 e & ø0 7 9 H 89 S T E F F F F G F F F F O F F F F P B D B D E F G H O P S T & L e Unit No Depends on fixed contacts 9 Please specify when ordering MP MP87 * L min: 9 for MH0 control device * L min: 70 for MH0 control device Doc-Nr.: DT tap changer type MHF III_ENG Created: 0..0 Revised:.0.07 Language: ENG 7 /

8 & Star Diagram / 0-0 / 00-0 / - Positions / Setting. % per Position (With luminium Support) e & ø0 98 ø0 L 7 9 H S T 9 E F F G F F O F F P B D Number of Positions B D E F G H O P S T & L e Unit No Depends on fixed contacts 0 0 Please specify when ordering MS7 MS7 MS7 MS7 MS7 MS7 MS7 MS7 * L min: 9 for MH0 control device * L min: 70 for MH0 control device Doc-Nr.: DT tap changer type MHF III_ENG Created: 0..0 Revised:.0.07 Language: ENG 8 /

9 & Star-Delta Coupling / 0-0 / 00-0 / (With luminium Support) e & ø0 9 ø0 L 7 9 H 89 S T E F F G F F O F F P B D B D E F G H O P S T & L e Unit No Depends on fixed contacts 9 Please specify when ordering MR MR7 * L min: 9 for MH0 control device * L min: 70 for MH0 control device Doc-Nr.: DT tap changer type MHF III_ENG Created: 0..0 Revised:.0.07 Language: ENG 9 /

10 & Common Output per Phase / 0-0 / 00-0 / - Positions / Setting. % per Position (With luminium Support) & 98 ø0 ø0 L e 7 9 H S T 8 H E F F G F F O F F P B D Number of Positions B D E F G H O P S T & L e Unit No Depends on fixed contacts 0 0 Please specify when ordering MC7 MC7 MC7 MC7 MC7 MC7 MC7 MC7 * L min: 9 for MH0 control device * L min: 70 for MH0 control device Doc-Nr.: DT tap changer type MHF III_ENG Created: 0..0 Revised:.0.07 Language: ENG 0 /

11 & Star diagram whit outer-earthed conductor / 0-0 / 00-0 / - Positions / Setting. % per Position (With luminium Support) & e ø0 98 ø0 L 7 H S 8 H 9 T E F F G F F O F F P B D Number of Positions B D E F G H O P S T & L e Unit No Depends on fixed contacts 0 0 Please specify when ordering MF7 MF7 MF7 MF7 MF7 MF7 MF7 MF7 * L min: 9 for MH0 control device * L min: 70 for MH0 control device Doc-Nr.: DT tap changer type MHF III_ENG Created: 0..0 Revised:.0.07 Language: ENG /

12 & e Two-stage Delta diagram / 0-0 / 00-0 / - Positions / Setting. % per Position (With luminium Support) & ø0 9 ø0 L L+W+8 W 7 9 H 89 S T E F F F G F F F O F F F P B D Number of Positions B D E F C H O P S T & L e Unit No Depends on fixed contacts 0 0 Please specify when ordering MD7 MD7 MD7 MD7 MD7 MD7 MD7 MD7 * L min: 9 for MH0 control device * L min: 70 for MH0 control device Doc-Nr.: DT tap changer type MHF III_ENG Created: 0..0 Revised:.0.07 Language: ENG /

13 When ordering please quote. tap changer unit no.. voltage class, current and type of setting or coupling. control device no. (MH 0 / MH 0 / MH 7 / MH 7). the language on the control device (page ). number of positions. the indication of the repeater disc (, B, C, D) 7. dimensions of the fixed contacts (Ø J and Ø K) 8. L, e, X, W dimensions from the tables For special setups not shown in the catalogue please contact us lbert MIER GmbH rmaturen für Transformatoren Industriestr. 9 7 Weil der Stadt Tel.: Fax: info@maier-armaturen.de Doc-Nr.: DT tap changer type MHF III_ENG Created: 0..0 Revised:.0.07 Language: ENG /

TR FI ES MA GM MK TN EG AZ IQ SY SA AE YE MZ TAP CHANGERS TYPE MHM

TR FI ES MA GM MK TN EG AZ IQ SY SA AE YE MZ TAP CHANGERS TYPE MHM TR FI ES M GM MK TN EG IQ SY S E YE M S TYPE MHM GENERL SPECIFICTION These tap changers are available in one, two or three phase applications. Multi layer types are also available. The shaft length is

More information

tap changers type EHR

tap changers type EHR tap changers type EHR TP CHNGERS TYPE EHR GENER SPECIFICTION These tap changers are available in one, two or three phase applications. Multi layer types are also available. The shaft length is fixed as

More information

Tap Changer Type MHZ Specification, Assembly and Materials

Tap Changer Type MHZ Specification, Assembly and Materials Tap Changr Typ MH Spcification, ssmbly and Matrials Dscriptions Gnral Spcifications Rmarks availabl in on, two or thr phas application multi layr typs upon rqust shaft lngth availabl in variabl sizs driving

More information

TR FI ES MA GM MK TN EG AZ IQ SY SA AE YE MZ TAP CHANGERS TYPE MHF II

TR FI ES MA GM MK TN EG AZ IQ SY SA AE YE MZ TAP CHANGERS TYPE MHF II TR FI ES M M MK TN E Z IQ SY S E YE MZ S TYE MF II ENER SECIFICTIN Ths tap changrs ar availabl in on, two or thr phas applications. Multi layr typs ar also availabl. Th shaft lngth is variabl. Connction

More information

MR medium rating busbar

MR medium rating busbar technical information General features MR is fully compliant with S EN 0-, specifically, the rated current of the Zucchini busbar trunking systems is always rated at the average ambient temperature of

More information

Mounting kits for insulation of power transistors

Mounting kits for insulation of power transistors ounting kits for insulation of power transistors tel. 0..6.6.6 www.elitaliaweb.it fax 0.6.6.0.09 info@elitaliaweb.it ST STS ST 0 STS 0 for transistor TO TO TO 0 TO 0 version with mica wafer S with silicone

More information

Rotary Joints. Series DP

Rotary Joints. Series DP Rotary Joints Series DP Rotary Joints Series DP DP rotary joints are suitable for: hot and cold water modified design -00 for thermal oil Small Series also for hydraulic oil and compressed air high speeds

More information

ELINEMK Technical Characteristics Rated Current Busbar Code Standards Rated Isolation Voltage Max. Rated Operational Voltage Rated Frequency Pollution Degree Protection Degree External Mechanical Impacts

More information

DRUM MOTOR DM 0080 DRUM MOTOR DM Technical data. Design variants and accessories

DRUM MOTOR DM 0080 DRUM MOTOR DM Technical data. Design variants and accessories Practice-iented, scalable and thought out in detail: The new drum mot makes it easy to ild a completely indidual convey system and is dimensioned f the higher requirements f permissible belt tension from

More information

DRUM MOTOR DM 0080 DRUM MOTOR DM Technical data. Design variants and accessories

DRUM MOTOR DM 0080 DRUM MOTOR DM Technical data. Design variants and accessories Practice-iented, scalable and thought out in detail: The new drum mot makes it easy to ild a completely indidual convey system and is dimensioned f the higher requirements f permissible belt tension from

More information

M/60210/M Miniature rotary actuators

M/60210/M Miniature rotary actuators M/6020/M Miniature rotary actuators Double acting - Magnetic piston - Ø 2 and 20 mm Smooth operation with zero backlash Lightweight ompact envelope dimensions Integral magnets for positional feedback TEHNIL

More information

Points. Precision Positioning Table TU. Variation. Major product specifications With flange

Points. Precision Positioning Table TU. Variation. Major product specifications With flange 9 0 Precision Positioning Table Ball screw inear Points lide table with high accuracy and high rigidity in a single structure lide table Compact and slim type positioning table with an original U-shaped

More information

IR 40. Non-Contact Infrared Temperature Sensor/Transmitter. Temperature Range: 0~1000

IR 40. Non-Contact Infrared Temperature Sensor/Transmitter. Temperature Range: 0~1000 Non-Contact Infrared Temperature Sensor/Transmitter Temperature Range: 0~1000 IR 40 C-910C, Bupyeong Woolim Lion s Valley, #425, Cheongcheon-Dong, Bupyeong-Gu, Incheon, Korea TEL: +82-32-623-7507 FAX:

More information

Amphenol. Amphenol-Tuchel Electronics GmbH. Circular Connectors C 091 A/B/D Series

Amphenol. Amphenol-Tuchel Electronics GmbH. Circular Connectors C 091 A/B/D Series Amphenol Amphenol-Tuchel Electronics GmbH Circular Connectors C 09 A/B/D Series The Company Amphenol-Tuchel Electronics GmbH is a member of the USA based Amphenol Corporation. With our own global presence

More information

Solenoid valves Type EVR 2 g 40 NC/ NO New EVR 6 with Steel cover design

Solenoid valves Type EVR 2 g 40 NC/ NO New EVR 6 with Steel cover design MAKING MODERN LIVING POSSIBLE Technical brochure Solenoid valves EVR 2 g 40 NC/ NO New with Steel cover design EVR is a direct or servo operated solenoid valve for liquid, suction, and hot gas lines with

More information

Standardized Chemical Pumps. Fields of Application. Designation. Design. Operating Data. Type Series Booklet /7-10 G2 CPK-H

Standardized Chemical Pumps. Fields of Application. Designation. Design. Operating Data. Type Series Booklet /7-10 G2 CPK-H Type Series Booklet.5/7-0 G CPK-H Standardized Chemical Pumps to EN 5/ISO 5/ISO 599, heatable Automation products available: Hya-Drive Hyamaster hyatronic Fields of Application CPK-H pumps are used for

More information

Clausing Industrial, Inc. Variable Speed 20" Single and Multi-spindle, Belt Drive Industrial Drill Presses

Clausing Industrial, Inc. Variable Speed 20 Single and Multi-spindle, Belt Drive Industrial Drill Presses www.clausing-industrial.com Variable Speed 20" Single and Multi-spindle, Belt Drive Industrial Drill Presses Clausing Industrial, Inc. Two Speed Variable Speeds 150-2000rpm Variable Speeds 200-1300rpm

More information

Type M4 - SON - SO - MS

Type M4 - SON - SO - MS 9. REV. Type M - SON - SO - MS Aircaps Tank venting and water excluding aircaps. For installation on service tank air pipes. Inerted void spaces and ballast tanks In order to maintain inert gas pressure

More information

Metal oil filler and air breather filler caps. Bayonet connection. Reservoir holes. TA46 B (Materials)

Metal oil filler and air breather filler caps. Bayonet connection. Reservoir holes. TA46 B (Materials) Metal oil filler and air Series T 46 4 5 6 4 ayonet connection Ø 46 7 8 46 Reservoir holes T46 (Materials) M5 - Cover: Chrome Plated Steel - Filter element: Impregnated paper Polyurethane 64-6 - Flange:

More information

T20WN. Data Sheet. Torque transducers. Special features. Installation example with bellows couplings. B en

T20WN. Data Sheet. Torque transducers. Special features. Installation example with bellows couplings. B en T20WN Torque transducers Data Sheet Special features - Nominal (rated) torques 0.1 N m, 0.2 N m, 0. N m, 1 N m, 2 N m, N m, 10 N m, 20 N m, 0 N m, 100 N m, 200 N m - Accuracy class: 0.2 - Contactless transmission

More information

System Components. Electric Motors.

System Components. Electric Motors. System Components Electric Motors www.powerjacks.com Contents.1. Electric Motors.1.1. AC Motors.1.. AC Motor Performance 0 rpm ( pole).1.. AC Motor Performance 00 rpm ( pole).1.. AC Motors with Integral

More information

Product description. Compact Modules. Characteristic features. Further highlights

Product description. Compact Modules. Characteristic features. Further highlights 4 Compact Modules Product description Characteristic features Five fine-tuned sizes based on a compact precision aluminum profile with two integrated pre-tensioned ball rail systems Identical external

More information

RF Power Feed-Through Capacitors with Conductor Rod, Class 1 Ceramic

RF Power Feed-Through Capacitors with Conductor Rod, Class 1 Ceramic DB 06030, DB 06040, DB 06060 RF Power Feed-Through Capacitors with Conductor Rod, Class Ceramic FEATURES Small size Geometry minimizes inductance Wide range of capacitance values APPLICATIONS Filtering

More information

ic-wg BLCC WGC PACKAGE SPECIFICATION

ic-wg BLCC WGC PACKAGE SPECIFICATION Rev B1, Page 1/5 ORDERING INFORMATION Type Package Options Order Designation ic-wg BLCC WGC none ic-wg BLCC WGC ic-wg BLCC WGC reticle ic-wg BLCC WGC-WG1R WG1R Code Disc 13bit-Gray +2048 PPR A/B, d 44mm

More information

DIM. A (+ 0,05 0,51) .135 ±.015 (3,43 ± 0,38) COMMON LUG INTEGRAL ASSEMBLY NUT, DO NOT REMOVE 1/4-32 UNEF-2A THREAD

DIM. A (+ 0,05 0,51) .135 ±.015 (3,43 ± 0,38) COMMON LUG INTEGRAL ASSEMBLY NUT, DO NOT REMOVE 1/4-32 UNEF-2A THREAD Multi-Deck SERIES 0 SERIES 0 0." Diameter, / Amp, Standard, Military SR FEATURES Proven Quality in Thousands of Applications Gold-plated Contact System 0,,, 0 and 0 Angle Options MIL Qualified Versions

More information

Variable Speed 20" Single and Multi-spindle, Belt Drive Industrial Drill Presses

Variable Speed 20 Single and Multi-spindle, Belt Drive Industrial Drill Presses www.clausing-industrial.com Variable Speed 20" Single and Multi-spindle, Belt Drive Industrial Drill Presses Two Speed Variable Speeds 150-2000rpm Variable Speeds 200-1300rpm Variable Speeds 300-2000rpm

More information

AT SERIES OFF CIRCUIT TAP CHANGERS

AT SERIES OFF CIRCUIT TAP CHANGERS T SERIES OFF CIRCUIT TP CHNGERS THE CHOICE COE S.P.. PUTS ON THE RKET THE NEW T SERIES OFF CIRCUIT TP CHNGERS. T COE: THE CHOICE Comem S.p.. makes use of four main characteristics in order to be successful

More information

CMA - B - C - D - CMR

CMA - B - C - D - CMR Cast iron self-priming electric pumps. APPLICATIONS Pressure boosting domestic plants Small-scale irrigation Moving non-aggressive liquids for civil and industrial use Washing plants Washing vehicles CMA-B-C-D

More information

Protected. Main specifications. Additional specifications. Product adaptations

Protected. Main specifications. Additional specifications. Product adaptations Protected 83 06 Double break switching Options for operation in stable positions Choice of actuators and fixing positions Main specifications Standard 83 06 0 stable lever positions 83 06 4 stable plunger

More information

Amphenol C 091 A/B/D. Circular Connectors. Amphenol-Tuchel Electronics GmbH

Amphenol C 091 A/B/D. Circular Connectors. Amphenol-Tuchel Electronics GmbH Amphenol C 091 A/B/D Circular Connectors Amphenol-Tuchel Electronics GmbH General information These connectors are designed and produced in conformity with the low-voltage directive (/3/EWG) respectively

More information

MADILL MBT GRAPPLE RETURN TO INDEX

MADILL MBT GRAPPLE RETURN TO INDEX MADILL MBT GRAPPLE RETURN TO INDEX MBT CONTROL VALVE Additional Parts Breakdown for: - Outrigger Sections - Rotate Section - End Plate E 00- page Valve section Basic element without additional functions

More information

Series MHY2/MHW Angular Gripper. Cam actuation style is now standardized! MHZ2 MHZJ2 MHQ MHL2 MHR MHK MHS MHC2 MHT2 MHY2 MHW2 MRHQ 2.

Series MHY2/MHW Angular Gripper. Cam actuation style is now standardized! MHZ2 MHZJ2 MHQ MHL2 MHR MHK MHS MHC2 MHT2 MHY2 MHW2 MRHQ 2. 18 Angular Gripper Cam Style Rack & Pinion Style Series / Cam actuation style is now standardized! 2.8-1 18 Angular Gripper 18 Angular Gripper Series / Cam Style Rack & Pinion Style Series / Series MHY/Cam

More information

Ball screw. Linear. Coupling cover. 1Positioning table of a structure with enhanced sealing property. 3 High corrosion resistance

Ball screw. Linear. Coupling cover. 1Positioning table of a structure with enhanced sealing property. 3 High corrosion resistance Cleanroom Precision Positioning Table TC Ball screw TC EB Slide table inear Way Side cover Stainless sheet Motor bracket inear Coupling cover Pipe threads for suction connector Points ight weight, low

More information

Surface-mounting thermostats Series ATH

Surface-mounting thermostats Series ATH JUMO GmbH & Co. KG Delivery address:mackenrodtstraße 14, 36039 Fulda, Germany Postal address: 36035 Fulda, Germany Phone: +49 661 6003-0 Fax: +49 661 6003-607 E-mail: mail@jumo.net Internet: www.jumo.net

More information

Zero-point clamping. Changeover in seconds! SAFE. patented collet lock

Zero-point clamping. Changeover in seconds! SAFE. patented collet lock Zero-point clamping Changeover in seconds! SAFE patented collet lock Zero-point clamping since 1995 AG Company headquarters in Dübendorf Switzerland AG Werkzeug- und Spanntechnik Im Schossacher 17 CH-8600

More information

Have a look at the following video which shows an invention developed in the High-Low Tech Lab at MIT.

Have a look at the following video which shows an invention developed in the High-Low Tech Lab at MIT. Have a look at the following video which shows an invention developed in the High-Low Tech Lab at MIT. What is the special property of the ink the researchers have invented? We will investigate which materials

More information

RF Power Feed-Through Capacitors with Conductor Rod, Class 1 Ceramic

RF Power Feed-Through Capacitors with Conductor Rod, Class 1 Ceramic DB 030088, DB 03000 RF Power Feed-Through Capacitors with Conductor Rod, Class Ceramic FEATURES Small size Geometry minimizes inductance Wide range of capacitance values APPLICATIONS Filtering purposes

More information

IM 1001 IM 3001 (1) IM 2001 (1) IM 3601 (1) IM 2101 (1) at 50/60 Hz (IM B3) (IM B5) (IM B35) (IM B14) (IM B34) Max. Max.

IM 1001 IM 3001 (1) IM 2001 (1) IM 3601 (1) IM 2101 (1) at 50/60 Hz (IM B3) (IM B5) (IM B35) (IM B14) (IM B34) Max. Max. 2016/09/05 version 230 V Δ / 380 V Υ / 400 V Υ / 415 V Υ 50 Hz - 460 V Υ 60 Hz L 0.75 4910125 10 4910126 4 4910127 1 4910129 1 4910130 1 LG 1.1 4910138 10 4910139 4 4910140 1 4910142 1 4910143 1 SL 1.5

More information

Cooling Water Flow Regulator

Cooling Water Flow Regulator Temperature controlled, indirectly and directly actuated diaphragm valves / seat valves Port size G 3/8 to G DN 0 to DN 0 ontinuous regulation High accuracy No auxiliary energy required Technical data

More information

IR 80-H. Non-Contact Infrared Temperature Sensor/Transmitter. Temperature Range: 500~1700

IR 80-H. Non-Contact Infrared Temperature Sensor/Transmitter. Temperature Range: 500~1700 Non-Contact Infrared Temperature Sensor/Transmitter Temperature Range: 500~1700 IR 80-H C-910C, Bupyeong Woolim Lion s Valley, #425, Cheongcheon-Dong, Bupyeong-Gu, Incheon, Korea TEL: +82-32-623-7507 FAX:

More information

Blocks and Holders POWR-BLOKS. Connectors. Ampere Ratings. Ordering Information. Applications. Specifications. Distribution/Splicer Blocks and Covers

Blocks and Holders POWR-BLOKS. Connectors. Ampere Ratings. Ordering Information. Applications. Specifications. Distribution/Splicer Blocks and Covers Connectors Box lug connectors are designed for use with a single, solid or class B or C stranded conductor. Use of more than one conductor per connector opening or use of extra-flexible, fine stranded

More information

DATA RACK BUSBAR. Data Rack Busbar Systems A.

DATA RACK BUSBAR. Data Rack Busbar Systems A. Data Rack Busbar Systems 250...1000 A www.eae.com.tr Overview Overview To power the mission critical IT infrastructures on the Data Rack Cabinets, EAE offers a highly flexible and reliable Busbar System

More information

T h e rm i s t o r s

T h e rm i s t o r s Data Pack E Issued March 00 - T h e rm i s t o r s NTC thermistors The R S range of NTC thermistors includes standard tolerance negative temperature coefficient thermistors, a range of small close tolerance

More information

variable flow dampers

variable flow dampers Constant-/ DAU, DAEU, DAVU Summary DAU - manual single flow unit DAEU - motorized twin flow unit DAVU - motorized variable flow unit Diameters Ø 0 Flow range 0 l/s ( m³/h) Pressure range Pa (over the unit)

More information

A2 3D Printer Installation Instruction

A2 3D Printer Installation Instruction A2 3D Printer Installation Instruction Introduction Attention: 1.Please make sure the package not broken when you receive it. 2.Please check the printer parts according to the packing list. 3. Please contract

More information

ø6, ø10, ø15, ø20, ø25, ø32, ø40, ø50, ø63 How to Order Switch rail Nil Standard stroke Refer to page 12 for standard stroke.

ø6, ø10, ø15, ø20, ø25, ø32, ø40, ø50, ø63 How to Order Switch rail Nil Standard stroke Refer to page 12 for standard stroke. Magnetically Coupled Rodless Cylinder: Direct Mount ype Series ø, ø, ø, ø, ø, ø, ø, ø0, ø Direct mount type mm mm mm mm mm mm mm 0 0 mm mm 00 MB Piping type Both sides piping type Centralized piping type

More information

I nllk 08018/18 I nllk I nllk 08036/36 I nllk I I nllk 08058/58 I

I nllk 08018/18 I nllk I nllk 08036/36 I nllk I I nllk 08058/58 I I nllk / I x W x W x W x W x W Technical data Cooper Crouse-Hinds - all rights reserved nllk / nllk nllk / nllk nllk / Marking to //EC II G Ex na II T / II D td A IP T C EC Conformity Statement PTB ATEX

More information

MINIATURE MICROSWITCHES - PREMIUM

MINIATURE MICROSWITCHES - PREMIUM 0/06 MINIATURE MICROSWITCHES - PREMIUM V - 86 High precision flexible leaf snap-action mechanism Operation without balance-point, even at extremely slow actuating speed Broad range of operating forces

More information

Ref. Parts No. Parts Name P A B BS A B BS Remarks Gear Case Assy Gear Case (Inside)

Ref. Parts No. Parts Name P A B BS A B BS Remarks Gear Case Assy Gear Case (Inside) GR 480 / GR 530 Quantity GR480 GR530 Ref. Parts No. Parts Name P A B BS A B BS Remarks 80-1020-100-00 Gear Case Assy 1 1 1 1 1 1 1 80-1020-101-00 Gear Case (Inside) 1 1 1 1 1 1 2 80-1020-103-00 Gear Case

More information

Serie B2.1. Flanged ductile iron ball valve. made in. Application fields. Shut-off valves E U R O P E. 18

Serie B2.1. Flanged ductile iron ball valve. made in. Application fields. Shut-off valves E U R O P E. 18 erie B. Flanged ductile iron ball valve BRanDOni made in E U R O P E Application fields WATER CONdITIONING GA EATING INdUTRY FIRE FIGTING www.brandoni.it erie B. eries B. valves are shut-off ball valves

More information

1.2 Z 014-A LUG TYPE BUTTERFLY VALVE Z 014-A TECHNICAL DATA:

1.2 Z 014-A LUG TYPE BUTTERFLY VALVE Z 014-A TECHNICAL DATA: TECNICA DATA: ug type butterfly valve with threaded holes. This type enables the one-sided lugging of pipes. Nominal diameter: Face-to-face: EN Series (DIN T ) ISO Series API 0 Table BS Series NF E -0.

More information

PRESSURE GAUGE SELECTORS

PRESSURE GAUGE SELECTORS PRESSURE GUGE SELECORS Gauge isolator valves are designed to protect pressure gauges from pressure shocks when the pressure reading is not required; after each reading setting the selector to the closed

More information

COMMODORE BRASS TELESCOPE ZHUMELL COMMODORE BRASS TELESCOPE

COMMODORE BRASS TELESCOPE ZHUMELL COMMODORE BRASS TELESCOPE 3 0 15 15 E OWNER S MANUAL COMMODORE BRASS TELESCOPE ZHUMELL COMMODORE BRASS TELESCOPE 5 W 60 W 30 W 45 W Zhumell customers know that there are plenty of ways to experience the world. They also understand

More information

Astral Tekno Cylinders

Astral Tekno Cylinders stral Tekno Cylinders stral Tekno cylinders CYINDER SECURITY ttack Resistance High resistance to bumping or percussion thanks to the KP (ump Key Power) device. High resistance to housebreaking technique:

More information

IBV Series C Carbon Steel Inverted Bucket Vertical Steam Trap

IBV Series C Carbon Steel Inverted Bucket Vertical Steam Trap Local regulations may restrict the use of this product to below the conditions quoted. In the interests of development and improvement of the product, we reserve the right to change the specification without

More information

CDS. high density spring connection

CDS. high density spring connection CDS high density spring connection DENSTY STANDARD 1A CDS DENSTY A A spring connection CDS Series The originality of multipole connectors represents one of the core values of LE, a leading company in this

More information

IBV Series Z Alloy Steel Inverted Bucket Vertical Steam Trap

IBV Series Z Alloy Steel Inverted Bucket Vertical Steam Trap Local regulations may restrict the use of this product to below the conditions quoted. In the interests of development and improvement of the product, we reserve the right to change the specification without

More information

Surface-mounting Thermostats ATH Type Series

Surface-mounting Thermostats ATH Type Series Page 1/9 urface-mounting Thermostats ATH eries k enclosure protection IP 54 k tested to IN EN 14597 (replacing IN 3440) Brief description Thermostats control and monitor thermal processes. Instruments

More information

Its modular concept allows to build up a ball valve for any degree of automation and any kind of application

Its modular concept allows to build up a ball valve for any degree of automation and any kind of application Type 2657...59 DN 10 up to 80 mm; Plastic; 2/2 way dvantages/benefits ntegrated pilot valves, position feed-back and limit switches available Customized system solutions with Burkert valves & sensors With

More information

The perfect Torque Limiting Clutch for

The perfect Torque Limiting Clutch for The perfect Torque Limiting Clutch for Machine Tools Packaging Machinery Printing and Paper Machinery Automated Systems Power Transmission compact, backlash-free torque limiting clutch Immediate disengagement

More information

Liste de pièces Lista de Piezas Parts List

Liste de pièces Lista de Piezas Parts List 0th Anniversary Liste de pièces Lista de Piezas Parts List 0 3-9 09 DEC 0 A 5 3 3 8 0 9 SINGER 0th Anniversary Pos Part No Description 0 0053 E CLIP-ON-WASHER 0 0 M PHILIPS SCREW 3 0 038 CRINKLE WASHER

More information

Vacuum capacitors overview Capacitor selection guides

Vacuum capacitors overview Capacitor selection guides JENNINGS TECHNOLOGY Vacuum capacitors overview Capacitor selection guides Capacitors by type Capacitor type Vacuum variable Capacity max. (pf) Test voltage / Hz Model no. series Page number 7.,, 1 CVDD-

More information

MINIATURE MICROSWITCHES - PREMIUM

MINIATURE MICROSWITCHES - PREMIUM 0/08 MINIATURE MICROSWITCHES - PREMIUM V - 86 High precision flexible leaf snap-action mechanism Operation without balance-point, even at extremely slow actuating speed Broad range of operating forces

More information

BASE. Rotary limit switch. OptiOnS. FEAtuRES. CERtiFiCAtiOnS

BASE. Rotary limit switch. OptiOnS. FEAtuRES. CERtiFiCAtiOnS Rotary limit switch BASE Rotary limit switch used to control and measure the movement of industrial machines. Its compact size make it suitable for use in narrow spaces. FEAtuRES It consists of a gear

More information

Multi-axis controller V6 / VV6

Multi-axis controller V6 / VV6 The multi-axis controller is available in either single-axis or multi-axis options and is a robust controller used commonly in electro-hydraulic applications. The modular design and many possibilities

More information

Parts list and list of drawings

Parts list and list of drawings X-FEL Coupler Doc. Ref. : XFEL/05/01/MEM05/V2 Page : 1/7 Parts list and list of drawings Version n 2 Version n 1 on 30/03/05 on 28/02/05 Writed by : A. Gonnin Checked by : S. Prat On 30/11/04 On 25/03/05

More information

Connector~Tech Providing Harsh Environment Connector

Connector~Tech   Providing Harsh Environment Connector Connector~Tech www.connectortech.com.au Providing Harsh Environment Connector SOLUTIONS Tajimi TC18 series connectors are water-pro up to 30 meters in depth. Economical and highly reliable construction

More information

CTV series CHARACTERISTICS LINEAR UNITS

CTV series CHARACTERISTICS LINEAR UNITS CTV series CHARACTERISTICS The CTV series describes s with a precision ball screw drive and two parallel, integrated, Zerobacklash rail guides. Compact dimensions allow high performance features such as,

More information

BETA Protecting. Low-Voltage Fuse Systems. LV HRC fuse links. 3/36 Siemens ET B1 2008

BETA Protecting. Low-Voltage Fuse Systems. LV HRC fuse links. 3/36 Siemens ET B1 2008 LV HRC fuse links Overview LV HRC fuses are used for installation systems in non-residential, commercial and industrial buildings as well as in switchboards of power supply companies. They therefore protect

More information

1. Voltage is how much work is being done for a charge. 2. Lightning is the electric breakdown of air by weak electric fields and is a flow of energy.

1. Voltage is how much work is being done for a charge. 2. Lightning is the electric breakdown of air by weak electric fields and is a flow of energy. Chapters 17 and 18 Practice Problems True or False 1. Voltage is how much work is being done for a charge. 2. Lightning is the electric breakdown of air by weak electric fields and is a flow of energy.

More information

KM-1600SWH KM-1600SRH KM-1600SWH3 KM-1600SRH3

KM-1600SWH KM-1600SRH KM-1600SWH3 KM-1600SRH3 NO. ISSUED: REVISED: 71193 OCT. 2, 2001 JAN. 27, 2003 HOSHIZAKI STACKABLE CRESCENT CUBER MODELS KM-1600SWH KM-1600SRH KM-1600SWH3 KM-1600SRH3 PARTS LIST KM-1600SWH L-0 June, 2001 M-0 Feb., 2002 M-1 Feb.,

More information

Capacitive Pick-Up Type DB 040

Capacitive Pick-Up Type DB 040 Capacitive Pick-Up Type DB 040 Tel: (609) 924-3011 Fax (609) 924-3018 www.princetonscientific.com Email: info@princetonscientific.com CAPACITIVE PICK-UP PROBE TYPE DB 040 Application: The capacitive pick-up

More information

SINGLE IMPELLER CENTRIFUGAL ELECTRIC PUMPS in cast iron

SINGLE IMPELLER CENTRIFUGAL ELECTRIC PUMPS in cast iron Cast iron self-priming electric pumps. APPLICATIONS Pressure boosting domestic plants Small-scale irrigation Moving non-aggressive liquids for civil and industrial use Washing plants Washing vehicles CMA-B-C-D

More information

The FLUX F 430 with mechanical seal

The FLUX F 430 with mechanical seal The FLUX F 0 with mechanical seal Flexible coupling between motor and pump The pump must be used with many varying liquids, consequently the smallest residual left within the pump is unacceptable. You

More information

180 Angular Gripper. Series MHY2/MHW2. Cam actuation style is now standardised! 5-241

180 Angular Gripper. Series MHY2/MHW2. Cam actuation style is now standardised! 5-241 18 Angular Gripper Cam tyle Rack & Pinion tyle eries MHY2/MHW2 Cam actuation style is now standardised! -21 18 Angular Gripper Cam tyle Rack & Pinion tyle eries MHY2/MHW2 eries MHY/Cam tyle Light and compact

More information

2D - STRIP ANCHOR LIFTING SYSTEM

2D - STRIP ANCHOR LIFTING SYSTEM 2D - STRIP ANCHOR LIFTING SYSTEM WWW.TERWA.COM Terwa reserves the right to make changes to the documentation at any time Page 1 OVERVIEW LIFTING CLUTCHES AND TRANSPORT ANCHOR SA-B SA-ST SA-TTU UNIVERSAL

More information

Redox Reactions and Electrochemistry

Redox Reactions and Electrochemistry Redox Reactions and Electrochemistry Redox Reactions and Electrochemistry Redox Reactions (19.1) Galvanic Cells (19.2) Standard Reduction Potentials (19.3) Thermodynamics of Redox Reactions (19.4) The

More information

ROTARY CONTROLS. Rotary controls 1. GENERAL FEATURES 2. POSITION INDICATORS

ROTARY CONTROLS. Rotary controls 1. GENERAL FEATURES 2. POSITION INDICATORS ROTARY CONTROLS 1. GENERAL FEATURES ELESA-CLAYTON rotary controls are used to set and regulating a wide variety of machine functions. The device consists of: - a handwheel/knob, to manoeuvre the control

More information

Made in Italy HOSE REELS CATALOGUE TECHNOLOGY FOR FLUIDYNAMICS. No. E14/A1

Made in Italy HOSE REELS CATALOGUE TECHNOLOGY FOR FLUIDYNAMICS. No. E14/A1 Made in Italy HOSE REELS CATALOGUE TECHNOLOGY FOR FLUIDYNAMICS No. E14/A1 The complete range of our products is presented in the specific catalogues: HOSE REELS CATALOGUE No. E14/A2 HOSE REELS CATALOGUE

More information

1.2 Z 014-A LUG TYPE BUTTERFLY VALVE Z 014-A TECHNICAL DATA

1.2 Z 014-A LUG TYPE BUTTERFLY VALVE Z 014-A TECHNICAL DATA ug type butterfly valve with threaded holes. This type enables the one-sided lugging of pipes. TECNICA DATA Nominal diameter: 00 ( only PN0/) Face-to-face: EN Series (DIN T ) ISO Series API 0 Table BS

More information

Tangential Fans Series TW Impeller diameter 150 mm and 200 mm

Tangential Fans Series TW Impeller diameter 150 mm and 200 mm Tangential Fans Series TW Impeller diameter mm and 0 mm 105 Corporate Drive, Suite E Spartanburg, SC 293 PO Box 2889, Spartanburg, SC 294 USA Tel: 864-599-63 Fax: 864-599-6344 e-mail: info@ltg-inc.net

More information

ic-wg BLCC WGC OPTO ENCODER PACKAGE SPECIFICATION

ic-wg BLCC WGC OPTO ENCODER PACKAGE SPECIFICATION Rev E2, Page 1/5 ORDERING INFORMATION Type Package Options Order Designation ic-wg BLCC WGC Glass Lid ic-wg BLCC WGC-WG1L ic-wg BLCC WGC reticle ic-wg BLCC WGC-WG1R WG1R Code Disc 13bit-Gray +2048 PPR

More information

WAFER PATTERN BUTTERFLY TYP Z 011-A

WAFER PATTERN BUTTERFLY TYP Z 011-A TECNICA DATA A universally applicable wafer type valve acc. to EN 3. The large variety of basic materials allows applications in different industries. Nominal diameter: 0 ( only PN0/) Face-to-face: EN

More information

ic-wg BLCC WGC OPTO ENCODER PACKAGE SPECIFICATION

ic-wg BLCC WGC OPTO ENCODER PACKAGE SPECIFICATION Rev D1, Page 1/5 ORDERING INFORMATION Type Package Options Order Designation ic-wg BLCC WGC none ic-wg BLCC WGC ic-wg BLCC WGC reticle ic-wg BLCC WGC-WG1R WG1R Code Disc 13bit-Gray +2048 PPR A/B, d 44mm

More information

ROTARY MOTION CONTROL

ROTARY MOTION CONTROL ROTARY MOTION CONTROL Technical Data Sheet Nexen Mechanical Torque Limiter Family PMT / PMK / PMC 2TC 2CC ECC PCC Mechanical Torque Limiter The trend in industry is to design and incorporate more automation

More information

Magnets attract some metals but not others

Magnets attract some metals but not others Electricity and Magnetism Junior Science Magnets attract some metals but not others Some objects attract iron and steel. They are called magnets. Magnetic materials have the ability to attract some materials

More information

Distinctive Characteristics

Distinctive Characteristics Distinctive Characteristics Three methods of panel mounting: flat frame for flush with face or subpanel, snap-in, and PCB. Miniature Rockers Series M High insulating barriers increase isolation of circuits

More information

VX25 Enclosure System. Technical documentation PE conductor connection, current carrying capacity

VX25 Enclosure System. Technical documentation PE conductor connection, current carrying capacity VX Enclosure System Technical documentation PE conductor connection, current carrying capacity Enclosure system VX Contents Contents. General remarks. Introduction. Notes on the design of the earthing

More information

Ceramic Disc Capacitors Class 1 and 2, 500 V DC, General Purpose

Ceramic Disc Capacitors Class 1 and 2, 500 V DC, General Purpose D Series Ceramic Disc Capacitors D D FEATURES Low losses High stability Tangent line SH Tangent line SH High capacitance in small size Kinked (preferred) or straight leads Compliant to RoHS directive 2002/95/EC

More information

The OCTANORM system components set a new standard in shop design.

The OCTANORM system components set a new standard in shop design. O C TA N O R M S H O P S Y S T E M S. A B R I E F I N T R O D U C T I O N. The OCTANORM system components set a new standard in shop design. The wide range of aluminum profiles, the well designed accessories

More information

Instructions Manual Omegon Dobson Advanced 203

Instructions Manual Omegon Dobson Advanced 203 Instructions Manual Omegon Dobson Advanced 203 English version 10.2015 Rev A 1 The Omegon Advanced Dobson 203 Congratulations on the purchase of the new Omegon Advanced Dobson 203 telescope. This telescope

More information

Load Cells. 3/2 Introduction. 3/3 Mounting components 3/3 Introduction

Load Cells. 3/2 Introduction. 3/3 Mounting components 3/3 Introduction Siemens AG 2018 /2 Introduction / Mounting components / Introduction /4 Single point load cells /4 Overview /5 SIWAREX WL260 SP-S AA /5 - Load cell /6 SIWAREX WL260 SP-S AB /6 - Load cell /7 SIWAREX WL260

More information

Single Phase Motors Technical Datasheets

Single Phase Motors Technical Datasheets Single Phase Motors Technical Datasheets EN A dynamic, strong and ambitious Group: Orange1 Holding is an international renown Group, one of the most important European manufacturers of single-phase and

More information

Alco PA AA Diesel Set

Alco PA AA Diesel Set 30-15-1 30--1 Alco PA AA Diesel Set GL0901 PA A Unit ( lead ) Diesel Engine 1.) Shell ( blue, yellow, silver ) FC-000 *5.00 ( A unit )( Delaware & Hudson )( # 17 ) Shell ( orange, black, silver ) FC-001

More information

Ÿ 9-50-way std density Ÿ way high Density Ÿ Mixed layout constructions ( e.g. 7W2, 9W4, 17W5) Ÿ Power constructions in 20A -40A ( e.g.

Ÿ 9-50-way std density Ÿ way high Density Ÿ Mixed layout constructions ( e.g. 7W2, 9W4, 17W5) Ÿ Power constructions in 20A -40A ( e.g. Ÿ 9-50-way std density Ÿ 15-78 way high Density Ÿ Mixed layout constructions ( e.g. 7W2, 9W4, 17W5) Ÿ Power constructions in 20A -40A ( e.g., 3W3, 5W5, 8W8) Ÿ Feed-through capacitor & pi filter constructions

More information

Flow Divider Type MH2FA, Series 4X (Differential lock) Size 12 to 32 up to 420 bar up to 300 L/min

Flow Divider Type MH2FA, Series 4X (Differential lock) Size 12 to 32 up to 420 bar up to 300 L/min RE 8/0.98 8/0.9 Flow Divider Type MHF, eries X (Differential lock) ize to up to 0 bar up to 00 /min RE 8/0.98 Replaces: 0.9 Characteristics: Double-acting (dividing and summating) flow divider Fixed division

More information

WIRE ROPE MOUNT SILENTFLEX

WIRE ROPE MOUNT SILENTFLEX WIRE ROPE MOUNT SILENTFLEX Axial natural frequency Shear natural frequency to 1 Hz - Hz DESCRIPTION The helical cable isolators Silentflex are completely made in metal: manufactured with a stainless steel

More information

HUCK INTERACTIVE CD ROM : SPECIFICATION DRAWINGS MAGNA-LOK C B PROTRUDING C B UNINSTALLED PINS 100º COUNTERSUNK TRUSS

HUCK INTERACTIVE CD ROM : SPECIFICATION DRAWINGS MAGNA-LOK C B PROTRUDING C B UNINSTALLED PINS 100º COUNTERSUNK TRUSS HUCK INTERACTIVE CD ROM : SPECIFICATION DRAWINGS A C B PROTRUDING A C B UNINSTALLED PINS D 100º COUNTERSUNK C B A TRUSS D D 128 HUCK INTERACTIVE CD ROM : DIMENSIONS Min Max Max Max Max Nominal Nom Dia

More information

Single Contacts. ODU Springtac Contacts and ODU Lamella Contacts. Ø 0,76 mm to Ø 60 mm

Single Contacts. ODU Springtac Contacts and ODU Lamella Contacts. Ø 0,76 mm to Ø 60 mm Catalogue No. 0-e Single Contacts ODU Springtac Contacts and ODU Lamella Contacts Ø 0, mm to Ø 0 mm rue René Laennec 0 Taissy France Fax: 0 0, Tel : 0 9 9 E-mail:hvssystem@hvssystem.com Site web : www.hvssystem.com

More information

3D Drawing - CARIF 260 BSA

3D Drawing - CARIF 260 BSA D Drawing - CARIF 0 BSA DRAWING CODE DRAWING NAME NUMBER ASS000 Basement ASS00 Vice Base ASS00 Vice A ASS00B Vice B ASS00 Frame A ASS00B Frame B ASS000 Frame Cylinder A ASS000B Frame Cylinder B ASS000

More information