MAX TEMPCO. INITIAL ERROR (ppm/ C) Plastic DIP 8 CERDIP 8 Plastic DIP 0 C to +70 C Plastic DIP 8 SO REF01CZ 0 C to +70 C 65 ±100
|
|
|
- Blaise Walton
- 5 years ago
- Views:
Transcription
1 ; Rev 1; 8/99 General Description The REF01 and REF02 are precision voltage references that are pretrimmed to within ±3% of +10V and +5V, respectively. Both references feature excellent temperature stability (as low as ppm/ C worst case), low current drain, and low noise. The REF02 also provides a TEMP pin whose output voltage varies linearly with temperature, making this device suitable for a wide variety of temperature-sensing and control applications. Both devices are available from Maxim in the space-saving SO package, as well as in the standard 8-pin TO-99 and MINI-DIP packages. +5V, +10V Precision Features Pretrimmed to +5V, +10V ±0.3% Excellent Temperature Stability: 3ppm/ C Low Noise: 10µVp-p (REF02) Low Supply Current: 1.4mA max Short-Circuit Proof Linear Temperature Transducer O/P (REF02) Ordering Information PART TEMP. RANGE MAX TEMPCO INITIAL ERROR (ppm/ C) (mv) PIN-PACKAGE REF01EP REF01EZ REF01HP ±30 ±30 REF01HSA REF01CP REF01CSA REF01CZ REF01CESA -40 C to +85 C REF01Z -55 C to +1 C REF02EP REF02EZ REF02HP ± REF02HSA ± REF02CP REF02CSA REF02CZ REF02CESA -40 C to +85 C REF02Z -55 C to +1 C ± Ordering Information continued at end of data sheet. A to D Converters D to A Converters Digital Voltmeters Voltage Regulators Threshold Detectors Applications Typical Operating Circuit Reference with Trimmed Output Maxim Integrated Products 1 For free samples & the latest literature: or phone For small orders, phone
2 ABSOLUTE MAXIMUM RATINGS REF01 Input Voltage REF01, A, E, H, All DICE...40V REF01C...30V Power Dissipation T099 (J) (derate at 7.1mW C above 80 C)...500mW CERDIP (2) (derate at 6.7mW/ C above 75 C)...500mW Plastic Dip (P) (derate at 5.6mW/ C above 36 C)...500mW Small Outline (S) (derate at 5.0mW/ C above 55 C)..300mW Output Short-Circuit Duration (to ground or V IN )...Indefinite Storage Temperature Range...- C to +150 C Operating Temperature Range REF01A, REF C to +1 C REF01E, REF01H, REF01C (except REF01CESA)... REF01CESA C to +85 C DICE Junction Temperature (T j )...- C to +150 C Lead Temperature (soldering, 60s) C Stresses beyond those listed under Absolute Maximum Ratings may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated in the operational sections of the specifications is not implied. Exposure to absolute maximum rating conditions for extended periods may affect device reliability. ELECTRICAL CHARACTERISTICS REF01 (V IN = +15V, T A = + C, unless otherwise noted.) ELECTRICAL CHARACTERISTICS REF01 (V IN = +15V, -55 C T A = +1 C for REF01A and REF01, 0 C T A +70 C for REF01E and REF01H, I L = 0mA, unless otherwise noted.) 2
3 ELECTRICAL CHARACTERISTICS REF01 (continued) (V IN = +15V, T A = + C, unless otherwise noted.) ELECTRICAL CHARACTERISTICS REF01 (V IN = +15V, T A = T MIN to T MAX, unless otherwise noted.) Output Adjustment The REF01 trim terminal can be used to adjust the voltage over a 10V±300mV range. This feature allows the system designer to trim system errors by setting the reference to a voltage other than 10V, including V for binary applications (see the Typical Operating Circuit section). Adjustment of the output does not significantly affect the temperature performance of the device. The temperature coefficient change is approximately 0.7ppm/ C for 100mV of output adjustment. 3
4 +5V, +10V Precision ABSOLUTE MAXIMUM RATINGS REF02 Input Voltage REF02, A, E, H, All DICE...40V REF02C, D...30V Power Dissipation T099 (J) (Derate at 7.1mW C above 80 C)...500mW CERDIP (2) (Derate at 6.7mW C above 75 C)...500mW Plastic Dip (P) (Derate at 5.6mW C above 36 C)...500mW Small Outline (S) (Derate at 5.0mW C above 55 C)...300mW Storage Temperature Range...- C to +150 C Operating Temperature Range REF02A, REF C to +1 C REF02E, REF02H (Except REF02CESA)... REF02C (except REF02CESA), REF02D... REF02CESA C to +85 C Lead Temperature (Soldering, 60s) C DICE Junction Temperature (T j )...- C to +150 C Output Short-Circuit Duration (to Ground or V IN )...Indefinite Stresses beyond those listed under Absolute Maximum Ratings may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated in the operational sections of the specifications is not implied. Exposure to absolute maximum rating conditions for extended periods may affect device reliability. ELECTRICAL CHARACTERISTICS REF02 (V IN = +15V, T A = + C, unless otherwise noted.) ELECTRICAL CHARACTERISTICS REF01 (V IN = +15V, -55 C T A = +1 C for REF02A and REF02, 0 C T A +70 C for REF02E and REF02H, I L = 0mA, unless otherwise noted.) 4
5 ELECTRICAL CHARACTERISTICS REF02 (V IN = +15V, T A = + C, unless otherwise noted.) ELECTRICAL CHARACTERISTICS REF02 (V IN = +15V, T A = T MIN to T MAX and I L = 0mA, unless otherwise noted.) Output Adjustment The REF02 trim terminal can be used to adjust the output voltage over a 5V±300mV range. This feature allows the system designer to trim system errors by setting the reference to a voltage other than 5V (refer to the Typical Operating Circuit section). Adjustment of the output does not significantly affect the temperature performance of the device. Typically, the temperature coefficient change is 0.7ppm/ C for 100mV of output adjustment. Temperature Voltage Output The REF02 provides a temperature-dependent output voltage on the TEMP pin. This voltage is proportional to the absolute temperature, and has a scale factor of approximately 2.1mV/ C (Figure 2). Output Voltage = 2.1(T + 273)mV where T = Temperature in C Figure 2. REF02 Temperature/Voltage Output vs. Temperature 5
6 Typical Operating Characteristics 6
7 Typical Applications Figure 3. Precision Calibration Standard Figure 4. ±10V Reference Figure 5. Current Source Figure 6. Precision Temperature Transducer with Remote Sensor Chip Topography 7
8 Ordering Information (continued) PART TEMP. RANGE MAX. TEMPCO INITIAL ERROR (ppm/ C) (mv) PIN-PACKAGE REF01EJ* ±30 REF01HF* REF01CJ* REF01HZ* 8 Hermetic DIP REF01CP-2* REF01AJ* REF01J* -55 C to +1 C -55 C to +1 C ±30 REF01AZ* -55 C to +1 C 8 Hermetic DIP REF02EJ* REF02HJ* ± REF02CJ* REF02DJ* REF02HZ* 0 ± 8 Hermetic DIP REF02DP* 0 REF02DSA* 0 REF02AJ* -55 C to +1 C REF02J* -55 C to +1 C ± REF02AZ* -55 C to +1 C 8 Hermetic DIP *Contact factory for availability. Pin Configuration *NOTE: Pin 3 is N.C. (No Connection) on REF01, TEMP Output on REF02. Maxim cannot assume responsibility for use of any circuitry other than circuitry entirely embodied in a Maxim product. No circuit patent licenses are implied. Maxim reserves the right to change the circuitry and specifications without notice at any time. 8 Maxim Integrated Products, 120 San Gabriel Drive, Sunnyvale, CA Maxim Integrated Products Printed USA is a registered trademark of Maxim Integrated Products.
MAX TEMPCO (ppm/ C) INITIAL ERROR (mv)
19-0887; Rev 7; /07 General Description The are industry-standard precision voltage references. The stable 10V output of the REF01 can be adjusted over a ±% range with minimal effect on temperature stability.
REF0 TABLE OF CONTENTS Features... General Description... Pin Configurations... Revision History... Specifications... Electrical Specifications... Abs
FEATURES V output: ±0.% maximum Temperature voltage output:.9 mv/ C Adjustment range: ±% minimum Excellent temperature stability: 8. ppm/ C maximum Low noise: µv p-p maximum Low supply current:. ma maximum
Low-Voltage Analog Temperature Sensors in SC70 and SOT23 Packages
19-2040; Rev 1; 6/01 Low-Voltage Analog Temperature Sensors General Description The precision, low-voltage, analog output temperature sensors are available in 5-pin SC70 and SOT23 packages. The devices
1ppm/ C, Low-Noise, +2.5V/+4.096V/+5V Voltage References
19-123; Rev 1; 1/1 1ppm/ C, Low-Noise, +2.5V/+4.96V/+5V General Description The // are low-noise, precision voltage references with extremely low,.5ppm/ C typical temperature coefficients and excellent,
Precision, Micropower, Low-Dropout, High- Output-Current, SO-8 Voltage References
19-165; Rev ; 7/ Precision, Micropower, Low-Dropout, High- General Description The MAX6167 are precision, low-dropout, micropower voltage references. These three-terminal devices operate with an input
TOP VIEW. Maxim Integrated Products 1
9-2266; Rev 2; 6/3 3ppm/ C, Low-Power, Low-Dropout General Description The high-precision, low-power, low-dropout voltage reference features a low 3ppm/ C (max) temperature coefficient and a low dropout
High-Supply-Voltage, Precision Voltage Reference in SOT23 MAX6035
19-2606; Rev 3; 11/06 High-Supply-Voltage, Precision General Description The is a high-voltage, precision micropower voltage reference. This three-terminal device is available with output voltage options
Low-Cost, Micropower, Low-Dropout, High-Output-Current, SOT23 Voltage References
19-1613; Rev 3; 3/2 Low-Cost, Micropower, Low-Dropout, General Description The are low-cost, low-dropout (LDO), micropower voltage references. These three-terminal references are available with output
2Ω, Quad, SPST, CMOS Analog Switches
9-73; Rev ; 4/ 2Ω, Quad, SPST, CMOS Analog Switches General Description The // quad analog switches feature.6ω max on-resistance (R ) when operating from a dual ±5V supply. R is matched between channels
MAX701 N.C. GND DIP/SO
9-90; Rev ; /0 Power-Supply Monitor with Reset General Description The MAX00/MAX0/MAX0 are supervisory circuits used to monitor the power supplies in microprocessor (µp) and digital systems. The / outputs
PART. Maxim Integrated Products 1
9-704; Rev 5; /09 Improved Precision Micropower General Description The is a precision two-terminal shunt mode, bandgap voltage reference with a fixed reverse breakdown voltage of.225v. Ideal for space-critical
Regulated 3.3V Charge Pump MAX679
19-1217; Rev ; 4/97 Regulated 3.3 Charge Pump General Description The step-up, regulated charge pump generates a 3.3 ±4% output voltage from a 1.8 to 3.6 input voltage (two alkaline, NiCd, or NiMH; or
Ultra-Low-Power Series Voltage Reference
19-257; Rev 2; 3/5 Ultra-Low-Power Series Voltage Reference General Description The micropower, low-dropout bandgap voltage reference combines ultra-low supply current and low drift in a miniature 5-pin
Precision, 8-Channel/Dual 4-Channel, High-Performance, CMOS Analog Multiplexers
9-027; Rev 2; 8/02 Precision, 8-Channel/Dual 4-Channel, General Description The / precision, monolithic, CMOS analog multiplexers (muxes) offer low on-resistance (less than 0Ω), which is matched to within
Four-Channel Thermistor Temperature-to-Pulse- Width Converter
19-234; Rev ; 1/2 General Description The four-channel thermistor temperature-topulse-width converter measures the temperatures of up to four thermistors and converts them to a series of output pulses
Low-Voltage, 8-Channel/Dual 4-Channel Multiplexers with Latchable Inputs
9-396; Rev. ; 5/95 Low-Voltage, 8-Channel/Dual 4-Channel General Description The are low-voltage, CMOS, -of-8 and dual 4-channel muxes with latchable digital inputs. They feature low-voltage operation
Compact, Dual-Output Charge Pump
9-7; Rev ; 7/97 Compact, Dual-Output Charge Pump General Description The is a CMOS charge-pump DC-DC converter in an ultra-small µmax package. It produces positive and negative outputs from a single positive
3-Pin Microprocessor Reset Circuits
19-0344; Rev 6; 12/05 3-Pin Microprocessor Reset Circuits General Description The MAX803/MAX809/MAX810 are microprocessor (µp) supervisory circuits used to monitor the power supplies in µp and digital
4-Pin µp Voltage Monitors with Pin-Selectable Power-On Reset Timeout Delay
19-1122; Rev 3; 12/05 4-Pin µp oltage Monitors with Pin-Selectable General Description The microprocessor (µp) supervisory circuits monitor power supplies in µp and digital systems. They provide excellent
Dual High-Speed 1.5A MOSFET Drivers
19-132; Rev 2; 6/6 Dual High-Speed 1.A MOSFET Drivers General Description The are dual monolithic MOSFET drivers designed to tralate TTL/CMOS inputs to high voltage/current outputs. The MAX4426 is a dual
LOW HIGH OFF ON. Maxim Integrated Products 1
9-79; Rev ; /07 Low-Voltage, Quad, SPST General Description The MAX0/MAX/MAX are quad, low-voltage, single-pole/single-throw (SPST) analog switches. On-resistance (00Ω, max) is matched between switches
Miniature Electronically Trimmable Capacitor V DD. Maxim Integrated Products 1
19-1948; Rev 1; 3/01 Miniature Electronically Trimmable Capacitor General Description The is a fine-line (geometry) electronically trimmable capacitor (FLECAP) programmable through a simple digital interface.
1μA Ultra-Tiny Shunt Voltage Reference
EVALUATION KIT AVAILABLE MAX6069 General Description The MAX6069 ultra-low-power shunt references are ideal for space-critical and low-power applications. They are offered in a 4-bump wafer-level package
Switched-Capacitor Voltage Doublers
9-; Rev 3; / Switched-Capacitor Voltage Doublers General Description The ultra-small / monolithic, CMOS charge-pump voltage doublers accept input voltages ranging from +.V to +.V. Their high voltage-conversion
Monolithic CMOS Analog Multiplexers
19-008; Rev 3; 9/01 Monolithic CMOS Analog Multiplexers General escription Maxim s and are monolithic CMOS analog multiplexers (muxes): the is a single 8-channel (1-of-8) mux, and the is a differential
Low Drift, Low Power Instrumentation Amplifier AD621
a FEATURES EASY TO USE Pin-Strappable Gains of 0 and 00 All Errors Specified for Total System Performance Higher Performance than Discrete In Amp Designs Available in -Lead DIP and SOIC Low Power,.3 ma
PART. Maxim Integrated Products 1
9-79; Rev ; 9/ SC7 Inverting Charge Pumps General Description The / monolithic, CMOS chargepump voltage inverters in the ultra-small SC7 package feature a low Ω output resistance, permitting loads up to
N.C. OUT. Maxim Integrated Products 1
19-2892; Rev 2; 11/6 Ultra-Low-Power Precision Series General Description The MAX629 micropower, low-dropout bandgap voltage reference combines ultra-low supply current and low drift in a miniature 5-pin
Period/Frequency Output
/ General Description The / are low-cost, low-current temperature sensors with a single-wire output. The converts the ambient temperature into a square wave with a period proportional to absolute temperature
MAX471/MAX472 PART TEMP. RANGE PIN-PACKAGE. MAX471EPA 0 C to +70 C
19-; Rev 2; 12/96 µ µ µ µ PART TEMP. RANGE PIN-PACKAGE CPA CSA EPA C to +7 C C to +7 C -4 C to +8 C 8 Plastic DIP 8 SO 8 Plastic DIP ESA -4 C to +8 C 8 SO CPA C to +7 C 8 Plastic DIP CSA C to +7 C 8 SO
Precision, Low-Power, Low-Dropout, SOT23-3 Voltage References
19-777; Rev 3; /01 General Description The /MAX6021/MAX6025/MAX6030/MAX601/ MAX605/ precision, low-dropout, micropower voltage references are available in miniature SOT23-3 surface-mount packages. They
MAX6043 Precision High-Voltage Reference in SOT23
MAX643 General Description The MAX643 precision voltage reference provides accurate preset +, +3.3V, +4.96V, +5.V, and +1V reference voltages from up to +4V input voltages. The MAX643 features a proprietary
Pin Configurations/Functional Diagrams/Truth Tables IN V+ GND SOT23-6* MAX4544 ON OFF OFF ON SWITCHES SHOWN FOR "0" INPUT. Maxim Integrated Products 1
9-; Rev ; / Low-Voltage, Single-Supply General Description The are precision, dual analog switches designed to operate from a single +.7V to +V supply. Low power consumption (µw) makes these parts ideal
COM COM GND MAX4644 OFF OFF
9-7; Rev ; / High-Speed, Low-Voltage, 4, General Description The is a single-pole/double-throw (SPDT) switch that operates from a single supply ranging from +.V to +.V. It provides low 4 on-resistance
Precision, Quad, SPDT, CMOS Analog Switch
19-0189; Rev 1; 6/99 Precision, Quad, SPDT, MOS Analog Switch General Description The is a precision, quad, single-pole doublethrow (SPDT) analog switch. The four independent switches operate with bipolar
SC70, 1.6V, Nanopower, Beyond-the-Rails Comparators With/Without Reference
19-1862; Rev 4; 1/7 SC7, 1.6V, Nanopower, Beyond-the-Rails General Description The nanopower comparators in space-saving SC7 packages feature Beyond-the- Rails inputs and are guaranteed to operate down
MAX6012/6021/6025/ 6030/6041/6045/6050. Precision, Low-Power, Low-Dropout, SOT23-3 Voltage References. General Description.
General Description The /MAX6021/MAX6025/MAX6030/MAX6041/ MAX6045/ precision, low-dropout, micropower voltage references are available in miniature SOT23-3 surface-mount packages. They feature a proprietary
MAX14760/MAX14762/MAX14764 Above- and Below-the-Rails Low-Leakage Analog Switches
19-652; Rev ; 9/11 EVALUATION KIT AVAILABLE MAX1476// General Description The MAX1476// analog switches are capable of passing bipolar signals that are beyond their supply rails. These devices operate
3-Pin Microprocessor Reset Circuits
19-0344; Rev 7; 2/10 3-Pin Microprocessor Reset Circuits General Description The MAX803/MAX809/MAX810 are microprocessor (µp) supervisory circuits used to monitor the power supplies in µp and digital systems.
Pin Configurations/Functional Diagrams/Truth Tables IN V+ GND SOT23-6* MAX4544 ON OFF OFF ON SWITCHES SHOWN FOR "0" INPUT. Maxim Integrated Products 1
9-; Rev ; / Low-Voltage, Single-Supply General Description The MAX MAX are precision, dual analog switches designed to operate from a single +.V to +V supply. Low power consumption (µw) makes these parts
Precision, 16-Channel/Dual 8-Channel, Low-Voltage, CMOS Analog Multiplexers
/ Precision, 6-Channel/Dual 8-Channel, General Description The / low-voltage, CMOS analog multiplexers (muxes) offer low on-resistance (Ω max), which is matched to within 6Ω between switches and remains
MAX6033 High-Precision, Low-Dropout SOT23 Series Voltage Reference
MAX633 High-Precision, Low-Dropout SOT23 Series General Description The MAX633 ultra-high-precision series voltage reference features a low 7ppm/ C (max) temperature coefficient and a low dropout voltage
8-Channel/Dual 4-Channel, Low-Leakage, CMOS Analog Multiplexers
9-272; Rev 3; / 8-Channel/Dual -Channel, The / are monolithic, CMOS analog multiplexers (muxes). The 8-channel is designed to connect one of eight inputs to a common output by control of a 3-bit binary
TOP VIEW V L GND I/O V L GND
19-1847; Rev 3; 5/9 1µA, 2Mbps, Low-Voltage Level Tralators in SC7 and µdfn General Description The MAX337/ logic-level tralators are ideal for applicatio interfacing low-voltage devices to other logic
Low-Leakage, CMOS Analog Multiplexers
/ General Description The / are monolithic, CMOS analog multiplexers (muxes). The 8-channel is designed to connect one of eight inputs to a common output by control of a 3-bit binary address. The dual,
35Ω, Low-Voltage, SPST/SPDT Analog Switches in UCSP Package
19-1994; Rev 3; 2/3 35, Low-Voltage, SPST/SPDT General Description The low on-resistance (R ON ), low-voltage analog switches operate from a single +2.V to +5.5V supply. The / are single-pole/single-throw
Precision, 16-Channel/Dual 8-Channel, High-Performance, CMOS Analog Multiplexers
9-27; Rev 3; 3/ Precision, 6-Channel/Dual 8-Channel, General Description The MA36/MA37 precision, monolithic, CMOS analog multiplexers (muxes) offer low on-resistance (less than Ω), which is matched to
Precision, Quad, SPST Analog Switches
9-8; Rev ; 9/ Precision, Quad, SPST Analog Switches General Description The are precision, quad, single-pole single-throw (SPST) analog switches. The MAX364 has four normally closed (N), and the MAX365
MAX14753 V DD INA0 INA1 INA2 INA3 OUT INB0 INB1 INB2 INB3
19-4255; Rev 3; 7/10 8-Channel/Dual 4-Channel General Description The are 8-to-1 and dual 4-to-1 high-voltage analog multiplexers. Both devices feature 60Ω (typ) on-resistance with 0.03Ω (typ) on-resistance
3-Pin, Low-Power μp Reset Circuits MAX6800/MAX6801/ MAX6802. Benefits and Features. General Description. Typical Operating Circuit.
General Description The MAX6800/MAX6801/ microprocessor (μp) supervisory circuits monitor the power supplies in 2.85 to 5.0 μp and digital systems. They increase circuit reliability and reduce cost by
MAX4636EUB -40 C to +85 C 10 µmax 1 NO1 IN1 GND. 3 x 3 THIN QFN OFF ON ON OFF SWITCHES SHOWN FOR "0" INPUT. Maxim Integrated Products 1
9-79; Rev ; /3 Fast, Low-Voltage, Dual 4 SPDT General Description The are fast, dual 4 singlepole/double-throw (SPDT) analog switches that operate with supply voltages from +.8V to +.V. High switching
8-Channel/Dual 4-Channel, Low-Leakage, CMOS Analog Multiplexers
9-272; Rev 3; /4 8-Channel/Dual 4-Channel, The / are monolithic, CMOS analog multiplexers (muxes). The 8-channel is designed to connect one of eight inputs to a common output by control of a 3-bit binary
LM34 - Precision Fahrenheit Temperature Sensor
- Precision Fahrenheit Temperature Sensor Features Typical Application Calibrated directly in degrees Fahrenheit Linear +10.0 mv/ F scale factor 1.0 F accuracy guaranteed (at +77 F) Parametric Table Supply
PART MAX1666SEEE MAX1666XEEP UVO V CC REF MAX1666A/V UVA MMA WRN CGI. Maxim Integrated Products 1
19-1465; Rev 3; 11/04 General Description The MAX1666 provides complete protection against overvoltage, undervoltage, overcharge current, overdischarge current, and cell mismatch for 2-cell to 4-cell lithium-ion
ON OFF PART. Pin Configurations/Functional Diagrams/Truth Tables 5 V+ LOGIC
9-88; Rev ; /7 25Ω SPST Analog Switches in SOT23-6 General Description The are dual-supply single-pole/single-throw (SPST) switches. On-resistance is 25Ω max and flat (2Ω max) over the specified signal
PART TOP VIEW. Maxim Integrated Products 1
9-96; Rev ; 2/ 45, SPDT Analog Switch in SOT23-8 General Description The is a dual-supply, single-pole/doublethrow (SPDT) analog switch. On-resistance is 45 max and flat (7 max) over the specified signal
Ultra-Low-Power Precision Series Voltage Reference MAX6029. Features. General Description. Ordering Information. Applications.
MAX629 General Description The MAX629 micropower, low-dropout bandgap voltage reference combines ultra-low supply current and low drift in a miniature 5-pin SOT23 surface-mount package that uses 7% less
3.5Ω (max) at +3V PART. MAX4733EUA -40 C to +85 C 8 µmax MAX4732. Pin Configurations/Functional Diagrams/Truth Tables TOP VIEW (BUMPS ON BOTTOM) NC1
9-264; Rev 2 2/6 Ω, Dual SPST Analog Switches in UCSP General Description The MAX473// low-voltage, dual, single-pole/single-throw (SPST) analog switches operate from a single +2V to +V supply and handle
MAX6325/MAX6341/MAX6350
VILLE 19-123; Rev 1; 1/1 Pin onfiguration 8V TO 36V INPUT TOP VIEW 2.2µF * NR IN TRI REFERENE 2.2µF * I.. IN NR 1 2 3 4 DIP/SO 8 7 6 5 I.. I.. TRI *OPTIONL I.. = INTERNLLY ONNETED; DO NOT USE For pricing,
SC70/µDFN, Single/Dual Low-Voltage, Low-Power µp Reset Circuits
9-839; Rev 4; 4/07 SC70/µDFN, Single/Dual Low-Voltage, General Description The microprocessor (µp) supervisory circuits monitor power-supply voltages from +.8V to +5.0V while consuming only 3µA of supply
μp Supervisory Circuits
MAX6351 MAX636 General Description The MAX6351 MAX636 microprocessor (μp) supervisors with multiple reset voltages significantly improve system reliability and accuracy compared to separate ICs or discrete
with Manual Reset and Watchdog Timer
General Description The MAX6821 MAX6825 are low-voltage microprocessor (µp) supervisory circuits that combine voltage monitoring, watchdog timer, and manual reset input functions in a 5-pin SOT23 package.
Product Description. TMP01: Low Power, Programmable Temperature Controller (Temperature Sensor)
TMP0: Low Power, Programmable Temperature Controller (Temperature Sensor) Product Description The TMP0 is a temperature sensor which generates a voltage output proportional to absolute temperature and
Ω μ. PKG CODE M AX 5128E LA+ -40 C to +85 C 8 μdfn AAF L822-1 TEMP RANGE PIN - PA C K A G E TOP MARK PART. Maxim Integrated Products 1
19-3929; Rev 2; 6/7 μ Ω μ μ μ Ω μ PART TEMP RANGE PIN - PA C K A G E TOP MARK PKG M AX 5128E A+ -4 C to +85 C 8 μdfn AAF 822-1 H V CC GND POR 7 7-BIT NV MEMORY 128-POSITION DER 128 TAPS W UP DN SERIA INTERFACE
(Note 1) RH1086M ADJ 15V CAPACITOR(S) NOT SHOWN BOTTOM VIEW BOTTOM VIEW V IN ADJ 2 INPUT 1 FINAL SPECIFICATIONS SUBJECT TO CHANGE
RH086M and. Low Dropout Positive djustable Regulators DESCRIPTION The RH086M positive adjustable regulator is designed to provide for the H package and. for the K package with higher efficiency than currently
DLA LAND AND MARITIME COLUMBUS, OHIO TITLE MICROCIRCUIT, LINEAR, +5 V PROGRAMMABLE LOW DROPOUT VOLTAGE REGULATOR, MONOLITHIC SILICON
REVISIONS LTR DESCRIPTION DTE PPROVED Prepared in accordance with SME Y14.24 Vendor item drawing REV PGE REV PGE REV STTUS OF PGES REV PGE 1 2 3 4 5 6 7 8 9 10 11 PMIC N/ PREPRED BY RICK OFFICER DL LND
REF-01/REF-02 Precision Voltage References FEATURES DESCRIPTION
REF-01/ Precision otage References FEATURES n Trimmed Output ±0.3 n Low Drift ppm/ C Typ n Low Noise 3ppm (P-P) n High Line Rejection n Temperature Output n Low Suppy Current 1.4mA Max APPLICATIONS n A/D
INTEGRATED CIRCUITS. 74LVC138A 3-to-8 line decoder/demultiplexer; inverting. Product specification 1998 Apr 28
INTEGRATED CIRCUITS -to-8 line decoder/demultiplexer; inverting 998 Apr 8 FEATURES Wide supply voltage range of. to. V In accordance with JEDEC standard no. 8-A Inputs accept voltages up to. V CMOS lower
Case Outline(s). The case outlines shall be designated in Mil-Std-1835 and as follows:
SCOPE: CMOS, BUFFERED, MULTIPLYING 8-BIT D/A CONVERTER Type Generic Number Circuit Function 0 MX7528S(x)/883B DAC with ±4 LSB 02 MX7528T(x)/883B DAC with ±2 LSB 03 MX7528U(x)/883B DAC with ± LSB Case Outline(s).
LM35 Precision Centigrade Temperature Sensors
LM35 Precision Centigrade Temperature Sensors General Description The LM35 series are precision integrated-circuit temperature sensors, whose output voltage is linearly proportional to the Celsius (Centigrade)
INTEGRATED CIRCUITS. 74LV688 8-bit magnitude comparator. Product specification Supersedes data of 1997 May 15 IC24 Data Handbook.
INTEGRATED CIRCUITS Supersedes data of 1997 May 15 IC24 Data Handbook 1998 Jun 23 FEATURES Wide operating voltage: 1.0 to 5.5V Optimized for low voltage applications: 1.0V to 3.6V Accepts TTL input levels
Case Outline(s). The case outlines shall be designated in Mil-Std-1835 and as follows:
SCOPE: QUAD, SPST, HIGH SPEED ANALOG SWITCH Device Type Generic Number SMD Number DG44A(x)/883B 56-04MC DG44A(x)/883B 56-04MC Case Outline(s). The case outlines shall be designated in Mil-Std-835 and as
NPN/PNP transistor pair connected as push-pull driver in a SOT457 (SC-74) Surface-Mounted Device (SMD) plastic package.
Rev. 0 26 September 2006 Product data sheet. Product profile. General description NPN/PNP transistor pair connected as push-pull driver in a SOT457 (SC-74) Surface-Mounted Device (SMD) plastic package..2
FAN4040 Precision Micropower Shunt Voltage Reference
www.fairchildsemi.com Precision Micropower Shunt Voltage Reference Features Fixed 2.500V, 3.300V and 5.00V s to ±0.1% (25 C) Low output noise Low temperature coefficient to 0ppm/ C Small package Extended
Device Type Generic Number Circuit Function 01 DG406A(x)/883B 16-Channel Analog Multiplexer 02 DG407A(x)/883B Dual 8-Channel Analog Multiplexer
SCOPE: IMPROVED 6-CHANNEL/DUAL 8-CHANNEL, HIGH PERFORMANCE CMOS ANALOG MULTIPLEXER Device Type Generic Number Circuit Function 0 DG406A(x)/883B 6-Channel Analog Multiplexer DG407A(x)/883B Dual 8-Channel
Dual Ultra-Low-Voltage SOT23 µp Supervisors with Manual Reset and Watchdog Timer
Dual Ultra-Low-oltage SOT23 µp Supervisors with General Description The 6826 6831 are ultra-low-voltage microprocessor (µp) supervisory circuits designed to monitor two power supplies and have manual reset
9A HIGH-SPEED MOSFET DRIVERS
9A HIGH-SPEED MOSFET DRIVERS 9A HIGH-SPEED MOSFET DRIVERS FEATURES Tough CMOS Construction High Peak Output Current.................. 9A High Continuous Output Current........ 2A Max Fast Rise and Fall
with Current-Limiting Switch
General Description The MAX4834/MAX4835 family of low-dropout (LDO) linear regulators feature an accurate current-limiting switch with an integrated FLAG or RESET function. These devices operate from 2.5V
MAX2232/MAX2233 PART MAX2232EEE MAX2233EEE. -40 C to +85 C 16 PQSOP 16 PQSOP. -40 C to +85 C TOP VIEW MAX2232 MAX2233 PQSOP
9-47; Rev ; 4/99 µ µ PART EEE MAX22EEE TOP IEW TEMP. RANGE -4 C to + C -4 C to + C PIN-PACKAGE 6 PQSOP 6 PQSOP /MAX22 6 2 SHDN (D) CTRL (D) 4 6 7 MAX22 4 2 RAMP+ (N.C.) RAMP- (N.C.) 9 N.C. PQSOP GROUND
Case Outline(s). The case outlines shall be designated in Mil-Std-1835 and as follows:
SCOPE: CMOS, BUFFERED, MULTIPLYING 8-BIT D/A CONVERTER Device Type Generic Number Circuit Function 0 MX7528S(x)/883B DAC with ±4 LSB 02 MX7528T(x)/883B DAC with ±2 LSB 03 MX7528U(x)/883B DAC with ± LSB
65 V, 100 ma NPN/PNP general-purpose transistor. Table 1. Product overview Type number Package NPN/NPN PNP/PNP Nexperia JEITA
Rev. 1 17 July 29 Product data sheet 1. Product profile 1.1 General description NPN/PNP general-purpose transistor pair in a very small Surface-Mounted Device (SMD) plastic package. Table 1. Product overview
Case Outline(s). The case outlines shall be designated in Mil-Std-1835 and as follows:
+SCOPE: TTL COMPATIBLE CMOS ANALOG SWITCHES Device Type Generic Number 0 DG300A(x)/883B 02 DG30A(x)/883B 03 DG302A(x)/883B 04 DG303A(x)/883B Case Outline(s). The case outlines shall be designated in Mil-Std-835
INTEGRATED CIRCUITS. 74LV00 Quad 2-input NAND gate. Product specification Supersedes data of 1998 Apr 13 IC24 Data Handbook.
INTEGRATED CIRCUITS Supersedes data of 1998 Apr 13 IC24 Data Handbook 1998 Apr 20 FEATURES Wide operating voltage: 1.0 to 5.5 V Optimized for low voltage applications: 1.0 to 3.6 V Accepts TTL input levels
MAX31855 Cold-Junction Compensated Thermocouple-to-Digital Converter
19-5793; Rev 0; 3/11 General Description The performs cold-junction compensation and digitizes the signal from a K, J, N, T, or E type thermocouple. (Contact the factory for S and R type thermocouples.)
INT RST TEMP RANGE PIN- PACKAGE TOP MARK PKG CODE PART. -40 C to +125 C -40 C to +125 C 16 QSOP E16-4 MAX7323AEE+ 16 TQFN-EP* 3mm x 3mm MAX7323ATE+
19-3806; Rev 1; 7/07 INT RST Ω μ PART MAX7323AEE+ MAX7323ATE+ * TEMP RANGE -40 C to +125 C -40 C to +125 C PIN- PACKAGE TOP MARK PKG CODE 16 QSOP E16-4 16 TQFN-EP* 3mm x 3mm ADE T1633-4 PART INPUTS INTERRUPT
PART TEMP RANGE PIN-PACKAGE
9-0850; Rev 4; 6/0 Ω μ INT INT μ PART TEMP RANGE PIN-PACKAGE MAX7359ETG+ -40 C to +85 C 24 TQFN-EP* MAX7359EWA+ -40 C to +85 C 25 WLP * TOP VIEW AD0 GND IC COL0 8 7 6 5 4 3 INPUT +62V TO +36V V CC MAX7359
DATA SHEET. BF908WR N-channel dual-gate MOS-FET. Philips Semiconductors DISCRETE SEMICONDUCTORS Apr 25
DISCRETE SEMICONDUCTORS DATA SHEET File under Discrete Semiconductors, SC7 1995 Apr 25 Philips Semiconductors FEATURES High forward transfer admittance Short channel transistor with high forward transfer
50ppm/ C Precision Micropower Shunt Voltage References with Multiple Reverse Breakdown Voltages
Click here for production status of specific part numbers. LM4050/LM4051 References with Multiple s General Description The LM4050/LM4051 are precision two-terminal, shuntmode, bandgap voltage references
74LV373 Octal D-type transparent latch (3-State)
INTEGRATED CIRCUITS 74V373 Supersedes data of 1997 March 04 IC24 Data andbook 1998 Jun 10 74V373 FEATURES Wide operating voltage: 1.0 to 5.5V Optimized for ow Voltage applications: 1.0V to 3.6V Accepts
MAX4638/MAX Ω, Single 8:1 and Dual 4:1, Low-Voltage Analog Multiplexers
General Description The / are single : and dual : CMOS analog multiplexers/demultiplexers (muxes/ demuxes). Each mux operates from a single +.V to +V supply or dual ±.V supplies. These devices feature.ω
DATA SHEET. BC369 PNP medium power transistor; 20 V, 1 A DISCRETE SEMICONDUCTORS. Product specification Supersedes data of 2003 Nov 20.
DISCRETE SEMICONDUCTORS DATA SHEET book, halfpage M3D186 Supersedes data of 23 Nov 2 24 Nov 5 FEATURES High current Two current gain selections. APPLICATIONS Linear voltage regulators High side switches
MM74HC154 4-to-16 Line Decoder
4-to-16 Line Decoder General Description The MM74HC154 decoder utilizes advanced silicon-gate CMOS technology, and is well suited to memory address decoding or data routing applications. It possesses high
CMOS HIGHSPEED 8-BIT A/D CONVERTER WITH TRACK AND HOLD. Case Outline(s). The case outlines shall be designated in Mil-Std-1835 and as follows:
SCOPE: CMOS HIGHSPEED 8-BIT A/D CONVERTER WITH TRACK AND HOLD Device Type Generic Number 01 MX7824T(x)/883B 02 MX7824U(x)/883B Case Outline(s). The case outlines shall be designated in Mil-Std-1835 and
2N7002T. 1. Product profile. 2. Pinning information. N-channel TrenchMOS FET. 1.1 General description. 1.2 Features. 1.
Rev. 1 17 November 25 Product data sheet 1. Product profile 1.1 General description N-channel enhancement mode Field-Effect Transistor (FET) in a plastic package using TrenchMOS technology. 1.2 Features
MCP9700/9700A MCP9701/9701A
Low-Power Linear Active Thermistor ICs Features Tiny Analog Temperature Sensor Available Packages: SC-70-5, SOT-23-5, TO-92-3 Wide Temperature Measurement Range: - -40 C to +125 C Accuracy: - ±2 C (max.),
SC70/µDFN, Single/Dual Low-Voltage, Low-Power µp Reset Circuits
9-839; Rev 5; 7/2 SC70/µDFN, Single/Dual Low-oltage, General Description The microprocessor (µp) supervisory circuits monitor power-supply voltages from +.8 to +5.0 while consuming only 3µA of supply current
SY10/100EL11V. General Description. Precision Edge. Features. Pin Names. 5V/3.3V 1:2 Differential Fanout Buffer. Revision 10.0
SY10/100EL11 5/3.3 1:2 Differential Fanout Buffer Revision 10.0 General Description The SY10/100EL11 are 1:2 differential fanout gates. These devices are functionally similar to the E111A/L devices, with
Improved, Dual, High-Speed Analog Switches
-477; Rev ; 6/ Improved, ual, High-peed Analog witches General escription Maxim's redesigned G4// analog switches now feature guaranteed low on-resistance matching between switches (Ω max) and guaranteed
LM /LM /LM Micropower Voltage Reference Diode
LM185-1.2/LM285-1.2/LM385-1.2 Micropower Voltage Reference Diode General Description The LM185-1.2/LM285-1.2/LM385-1.2 are micropower 2-terminal band-gap voltage regulator diodes. Operating over a 10 µa
5V/400mA Low Drop Voltage ILE4275 TECHNICAL DATA
TECHNICAL DATA 5V/400mA Low Drop Voltage ILE4275 is integrated circuits of voltage regulator 5V/400 ma with low-drop voltage. The IC of voltage regulator 5V/400 ma are purposed to supply DC voltage 5V