Regulated 3.3V Charge Pump MAX679

Size: px
Start display at page:

Download "Regulated 3.3V Charge Pump MAX679"

Transcription

1 ; Rev ; 4/97 Regulated 3.3 Charge Pump General Description The step-up, regulated charge pump generates a 3.3 ±4% output voltage from a 1.8 to 3.6 input voltage (two alkaline, NiCd, or NiMH; or one Lithium-Ion battery). Output current is 2mA (min) from a 2. input. Only three external capacitors are needed to build a complete DC-DC converter. The s switching frequency is pin selectable at 33kHz or 1MHz to allow trade-offs between lowest supply current and smallest-size capacitors. The logic shutdown function reduces the supply current to 5 (max) and disconnects the load from the input. Special soft-start circuitry prevents excessive current from being drawn from the battery during start-up. This DC- DC converter requires no inductors and has low EMI. It is available in the ultra-small µmax package, which is only 1.11mm high and half the area of an 8-pin SO. Features Regulated 3.3 ±4% Output Ultra-Small: 1.1mm-High, 8-Pin µmax Package No Inductors Required Up to 1MHz Operation (small external components) Fits into.5 in. 2 Up to 85% Efficiency 1.8 to 3.6 Input oltage Range 5 Quiescent Supply Current 1 Shutdown Current Applications Battery-Powered Applications Miniature Equipment Backup-Battery Boost Converters Translators Two-Way Pagers Ordering Information PART TEMP. RANGE PIN-PACKAGE C/D C to +7 C Dice* EUA -4 C to +85 C 8 µmax *Dice are tested at T A = +25 C only. Typical Operating Circuit Pin Configuration INPUT 2 to 3.6 IN PUT 3.3, 2mA TOP IEW C IN C 1 8 OFF/ON SHDN PGND GND C1+ C1+ C1- PGND C1- C1 SHDN IN GND µmax Maxim Integrated Products 1 For free samples & the latest literature: or phone

2 ABSOLUTE MAXIMUM RATINGS IN,, SHDN, to GND to 6 PGND to GND...±.3 C1- to GND to ( IN +.3) C1+ to GND to ( +.3) Short to GND...1sec Continuous Power Dissipation (T A = +7 C) µmax (derate 4.1mW/ C above +7 C)...33mW Operating Temperature Range...-4 C to +85 C Storage Temperature Range C to +16 C Lead Temperature (soldering, 1sec)...+3 C Stresses beyond those listed under Absolute Maximum Ratings may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated in the operational sections of the specifications is not implied. Exposure to absolute maximum rating conditions for extended periods may affect device reliability. ELECTRICAL CHARACTERISTICS ( IN = SHDN = = 2, C IN = 4.7µF, C1 =.33µF, C = 1µF, T A = -4 C to +85 C, unless otherwise noted. Typical values are at T A = +25 C.) (Note 1) Input oltage Input Undervoltage Lockout oltage Output oltage Output Current PARAMETER No-Load Supply Current Leakage Current into in Shutdown Supply Current in Shutdown, SHDN Input oltage Low, > 3.17 IN = 2.5, = IN or GND = 3.6, SHDN = GND IN = 3.3 CONDITIONS MIN TYP MAX < IN < 3.3, T A = C to +85 C ma < I < 2mA T A = -4 C to +85 C x.3 x IN IN UNITS ma, SHDN Input oltage High IN = x.5 x IN IN, SHDN Input Leakage Current, SHDN = GND or IN.1 1 Switching Frequency = GND = IN khz Output Short-Circuit Current = GND, IN = ma Efficiency IN = 2, I = 1mA 8 % Note 1: Specifications to -4 C are guaranteed by design, not production tested. 2

3 Typical Operating Characteristics (Typical Operating Circuit with: IN = SHDN = 2, C IN = 4.7µF, C1 =.33µF, C = 1µF, tested in-circuit, T A = +25 C, unless otherwise noted.) EFFICIENCY (%) EFFICIENCY IN = 2. IN = 2.4 IN = 3. IN = TOC1a EFFICIENCY (%) EFFICIENCY IN = 2. IN = IN = 2.4 IN = 3.5 = GND (33kHz) TOC1b PUT OLTAGE () PUT OLTAGE = GND (33kHz) DASHED LINES INDICATE PUT OF REGULATION IN = 3.5 IN = 3. IN = 2. IN = TOC2a PUT OLTAGE () PUT OLTAGE IN = 2. DASHED LINES INDICATE PUT OF REGULATION IN = 3.5 IN = 3. IN = TOC2b SUPPLY CURRENT () SHDN = IN SHDN = GND SUPPLY CURRENT vs. SUPPLY OLTAGE SUPPLY OLTAGE () TOC5 SHUTDOWN SUPPLY CURRENT (na) SHUTDOWN SUPPLY CURRENT vs. TEMPERATURE IN = TEMPERATURE ( C) TOC PUMP FREQUENCY vs. TEMPERATURE = GND (33kHz) IN = 2.5 TOC8a IN = 2.5 PUMP FREQUENCY vs. TEMPERATURE TOC8b PUT RIPPLE (2mA LOAD) = GND (33kHz) TOC9 PUMP FREQUENCY (khz) PUMP FREQUENCY (khz) m/div TEMPERATURE ( C) TEMPERATURE ( C) 1µs/div 3

4 Typical Operating Characteristics (continued) (Typical Operating Circuit with: IN = SHDN = 2, C IN = 4.7µF, C1 =.33µF, C = 1µF, tested in-circuit, T A = +25 C, unless otherwise noted.) PUT RIPPLE (2mA LOAD) TOC1 LOAD-TRANSIENT RESPONSE (1mA TO 1mA LOAD, IN = 3) TOC11 LOAD-TRANSIENT RESPONSE (1mA TO 1mA LOAD, IN = 2) TOC12 1m/div 1m/div 5m/div I 5mA/div I 5mA/div 1µs/div IN = 3 1µs/div IN = 2 5µs/div Pin Description PIN NAME FUNCTION 1 2 SHDN 3 IN Set Charge-Pump Frequency Input. = GND selects 33kHz and = IN selects 1MHz. Do not leave unconnected. Shutdown Input. The device shuts down, the output disconnects from the input, and the supply current decreases to 1 when SHDN is a logic low. Connect SHDN to IN for normal operation. Supply Input. Connect to an input supply in the 1.8 to 3.6 range. Bypass IN to GND with a (C / 2)µF capacitor. 4 GND Ground. Analog ground for internal reference and control circuitry. 5 PGND Power Ground. Charge-pump current flows through this pin. 6 C1- Negative Terminal of the Charge-Pump Capacitor 7 C1+ Positive Terminal of the Charge-Pump Capacitor Power Output. Bypass to GND with an output filter capacitor (see the Design Procedure section). Detailed Description The regulated charge pump has a 5% dutycycle clock. In phase one (charge phase), the chargetransfer capacitor (C1) charges to the input voltage, and output current is delivered by the output filter capacitor (C). In phase two (transfer phase), C1 is placed in series with the input and connects to the output, transferring its charge to C. If the clock were to run continuously, this process would eventually generate an output voltage equal to two times the input voltage (hence the name doubler ). The charge pump regulates by gating the oscillator on and off as needed to maintain output regulation. This method has low quiescent current, but to achieve acceptable output ripple, C1 must be significantly lower in value than C. Start-Up Sequence The soft-start circuitry prevents excessive current from being drawn from the battery at start-up or when the output is shorted. This is done by limiting the charge pump to 1/1 the normal current until either the output is in regulation or the first 496 charge-pump 4

5 CHIP SUPPLY IN P6 P5 P4 Φ SW Φ T P3 C1+ Φ C C1 P2 Φ T SHDN PULSER C1- Φ SW P1 Φ C N1 OSCILLATOR + CONTROL LOGIC Φ C Φ T Φ SC Φ SC PGND CLOCK 1% OF N1 RESET 2 12 COUNTER EA (1 = PUT OER REGULATION POINT) 1.25 REF GND Φ SW = SWITCH CONNECTS TO IN DURING START-UP Φ T = TRANSFER PHASE OF PUMP Φ C = CHARGE PHASE OF PUMP (FULL STRENGTH) Φ SC = CHARGE PHASE OF PUMP (REDUCED STRENGTH) Figure 1. Block Diagram 5

6 cycles (about 4ms) have elapsed. The start-up sequence begins at power-up, when exiting shutdown, or when recovering from a short circuit. If IN is less than the 1.6 ULO threshold, the device remains shut down and ignores a high SHDN input. Design Procedure Optimize the charge-pump circuit for size, quiescent current, and output ripple by properly selecting the operating frequency and capacitors C IN, C1, and C. For lowest output ripple, select 1MHz operation ( = IN). In addition, increasing C relative to C1 will further reduce ripple. For highest efficiency, select 33kHz operation ( = GND) and select the largest practical values for C and C1 while maintaining a 3-to-1 ratio. See Table 1 for some suggested values and the resulting output ripple. Note that the capacitors must have low ESR (<2mΩ) to maintain low ripple. Currently, only ceramic capacitors can provide such low ESR; therefore, the output filter capacitors should be a combination of a 1µF ceramic capacitor and a 1µF tantalum capacitor. Smallest Size Set the frequency to 1MHz by connecting to IN. Table 1 shows typical external component values. Table 1. External Component Selection IN () C1 (µf) C (µf) (Hz) p-p (m) 1M 33k M 16 33k 22 1M 27 33k 56 1M 72 33k 89 PC Board Layout Place C1, C, and CIN close to the IC. Connect PGND and GND with a short trace. Efficiency Charge-pump efficiency is best at low frequency (33kHz). The theoretical maximum efficiency is given in the following equation: Theoretical maximum efficiency = / (2 x IN) Gate-charge losses amount to approximately 1mA from the output at full switching frequency (about 5% to 7% loss). Table 2. Manufacturers of Low-ESR Capacitors PRODUCTION METHOD MANUFACTURER CAPACITORS PHONE FAX Surface-Mount Tantalum Capacitors Surface-Mount Ceramic Capacitors AX Matsuo Sprague AX Matsuo TPS series 267 series 593D, 595D series X7R (83) (83) (714) (63) (63) (83) (714) (83) X7R (714) (714) Chip Information TRANSISTOR COUNT: 819 SUBSTRATE CONNECTED TO GND Maxim cannot assume responsibility for use of any circuitry other than circuitry entirely embodied in a Maxim product. No circuit patent licenses are implied. Maxim reserves the right to change the circuitry and specifications without notice at any time. 6 Maxim Integrated Products, 12 San Gabriel Drive, Sunnyvale, CA 9486 (48) Maxim Integrated Products Printed USA is a registered trademark of Maxim Integrated Products.

PART. Maxim Integrated Products 1

PART. Maxim Integrated Products 1 9-79; Rev ; 9/ SC7 Inverting Charge Pumps General Description The / monolithic, CMOS chargepump voltage inverters in the ultra-small SC7 package feature a low Ω output resistance, permitting loads up to

More information

Compact, Dual-Output Charge Pump

Compact, Dual-Output Charge Pump 9-7; Rev ; 7/97 Compact, Dual-Output Charge Pump General Description The is a CMOS charge-pump DC-DC converter in an ultra-small µmax package. It produces positive and negative outputs from a single positive

More information

Switched-Capacitor Voltage Doublers

Switched-Capacitor Voltage Doublers 9-; Rev 3; / Switched-Capacitor Voltage Doublers General Description The ultra-small / monolithic, CMOS charge-pump voltage doublers accept input voltages ranging from +.V to +.V. Their high voltage-conversion

More information

Low-Cost, Micropower, Low-Dropout, High-Output-Current, SOT23 Voltage References

Low-Cost, Micropower, Low-Dropout, High-Output-Current, SOT23 Voltage References 19-1613; Rev 3; 3/2 Low-Cost, Micropower, Low-Dropout, General Description The are low-cost, low-dropout (LDO), micropower voltage references. These three-terminal references are available with output

More information

TOP VIEW. Maxim Integrated Products 1

TOP VIEW. Maxim Integrated Products 1 9-2266; Rev 2; 6/3 3ppm/ C, Low-Power, Low-Dropout General Description The high-precision, low-power, low-dropout voltage reference features a low 3ppm/ C (max) temperature coefficient and a low dropout

More information

Ultra-Low-Power Series Voltage Reference

Ultra-Low-Power Series Voltage Reference 19-257; Rev 2; 3/5 Ultra-Low-Power Series Voltage Reference General Description The micropower, low-dropout bandgap voltage reference combines ultra-low supply current and low drift in a miniature 5-pin

More information

Precision, Micropower, Low-Dropout, High- Output-Current, SO-8 Voltage References

Precision, Micropower, Low-Dropout, High- Output-Current, SO-8 Voltage References 19-165; Rev ; 7/ Precision, Micropower, Low-Dropout, High- General Description The MAX6167 are precision, low-dropout, micropower voltage references. These three-terminal devices operate with an input

More information

Precision, Low-Power, Low-Dropout, SOT23-3 Voltage References

Precision, Low-Power, Low-Dropout, SOT23-3 Voltage References 19-777; Rev 3; /01 General Description The /MAX6021/MAX6025/MAX6030/MAX601/ MAX605/ precision, low-dropout, micropower voltage references are available in miniature SOT23-3 surface-mount packages. They

More information

N.C. OUT. Maxim Integrated Products 1

N.C. OUT. Maxim Integrated Products 1 19-2892; Rev 2; 11/6 Ultra-Low-Power Precision Series General Description The MAX629 micropower, low-dropout bandgap voltage reference combines ultra-low supply current and low drift in a miniature 5-pin

More information

Low-Voltage Analog Temperature Sensors in SC70 and SOT23 Packages

Low-Voltage Analog Temperature Sensors in SC70 and SOT23 Packages 19-2040; Rev 1; 6/01 Low-Voltage Analog Temperature Sensors General Description The precision, low-voltage, analog output temperature sensors are available in 5-pin SC70 and SOT23 packages. The devices

More information

MAX471/MAX472 PART TEMP. RANGE PIN-PACKAGE. MAX471EPA 0 C to +70 C

MAX471/MAX472 PART TEMP. RANGE PIN-PACKAGE. MAX471EPA 0 C to +70 C 19-; Rev 2; 12/96 µ µ µ µ PART TEMP. RANGE PIN-PACKAGE CPA CSA EPA C to +7 C C to +7 C -4 C to +8 C 8 Plastic DIP 8 SO 8 Plastic DIP ESA -4 C to +8 C 8 SO CPA C to +7 C 8 Plastic DIP CSA C to +7 C 8 SO

More information

High-Supply-Voltage, Precision Voltage Reference in SOT23 MAX6035

High-Supply-Voltage, Precision Voltage Reference in SOT23 MAX6035 19-2606; Rev 3; 11/06 High-Supply-Voltage, Precision General Description The is a high-voltage, precision micropower voltage reference. This three-terminal device is available with output voltage options

More information

Miniature Electronically Trimmable Capacitor V DD. Maxim Integrated Products 1

Miniature Electronically Trimmable Capacitor V DD. Maxim Integrated Products 1 19-1948; Rev 1; 3/01 Miniature Electronically Trimmable Capacitor General Description The is a fine-line (geometry) electronically trimmable capacitor (FLECAP) programmable through a simple digital interface.

More information

Ultra-Low-Power Precision Series Voltage Reference MAX6029. Features. General Description. Ordering Information. Applications.

Ultra-Low-Power Precision Series Voltage Reference MAX6029. Features. General Description. Ordering Information. Applications. MAX629 General Description The MAX629 micropower, low-dropout bandgap voltage reference combines ultra-low supply current and low drift in a miniature 5-pin SOT23 surface-mount package that uses 7% less

More information

with Current-Limiting Switch

with Current-Limiting Switch General Description The MAX4834/MAX4835 family of low-dropout (LDO) linear regulators feature an accurate current-limiting switch with an integrated FLAG or RESET function. These devices operate from 2.5V

More information

PART MAX1666SEEE MAX1666XEEP UVO V CC REF MAX1666A/V UVA MMA WRN CGI. Maxim Integrated Products 1

PART MAX1666SEEE MAX1666XEEP UVO V CC REF MAX1666A/V UVA MMA WRN CGI. Maxim Integrated Products 1 19-1465; Rev 3; 11/04 General Description The MAX1666 provides complete protection against overvoltage, undervoltage, overcharge current, overdischarge current, and cell mismatch for 2-cell to 4-cell lithium-ion

More information

Four-Channel Thermistor Temperature-to-Pulse- Width Converter

Four-Channel Thermistor Temperature-to-Pulse- Width Converter 19-234; Rev ; 1/2 General Description The four-channel thermistor temperature-topulse-width converter measures the temperatures of up to four thermistors and converts them to a series of output pulses

More information

DESCRIPTION TYPICAL APPLICATION. LTC Micropower, Regulated 5V Charge Pump in a 5-Pin SOT-23 Package FEATURES APPLICATIONS

DESCRIPTION TYPICAL APPLICATION. LTC Micropower, Regulated 5V Charge Pump in a 5-Pin SOT-23 Package FEATURES APPLICATIONS LTC117- Micropower, Regulated V Charge Pump in a -Pin SOT-23 Package FEATRES ltralow Power: I CC = 6µA Typ Short-Circuit/Thermal Protected V ±% Regulated Output Range: 2.7V to V Output Current: 10mA (

More information

RP mA, Ultra-Low Noise, Ultra-Fast CMOS LDO Regulator. General Description. Features. Applications. Ordering Information. Marking Information

RP mA, Ultra-Low Noise, Ultra-Fast CMOS LDO Regulator. General Description. Features. Applications. Ordering Information. Marking Information RP122 3mA, Ultra-Low Noise, Ultra-Fast CMOS LDO Regulator General Description The RP122 is designed for portable RF and wireless applications with demanding performance and space requirements. The RP122

More information

MAX6012/6021/6025/ 6030/6041/6045/6050. Precision, Low-Power, Low-Dropout, SOT23-3 Voltage References. General Description.

MAX6012/6021/6025/ 6030/6041/6045/6050. Precision, Low-Power, Low-Dropout, SOT23-3 Voltage References. General Description. General Description The /MAX6021/MAX6025/MAX6030/MAX6041/ MAX6045/ precision, low-dropout, micropower voltage references are available in miniature SOT23-3 surface-mount packages. They feature a proprietary

More information

SC1301A/B. 2A High Speed Low-Side MOSFET Driver in SOT-23 POWER MANAGEMENT. Applications. Typical Application Circuit

SC1301A/B. 2A High Speed Low-Side MOSFET Driver in SOT-23 POWER MANAGEMENT. Applications. Typical Application Circuit 查询 SC1301B 供应商 Description The is a cost effective single-channel highspeed MOSFET driver. The driver is capable of driving a 1000pF load in 0ns rise/fall time and has a 60ns propagation delay time from

More information

Period/Frequency Output

Period/Frequency Output / General Description The / are low-cost, low-current temperature sensors with a single-wire output. The converts the ambient temperature into a square wave with a period proportional to absolute temperature

More information

4-Pin µp Voltage Monitors with Pin-Selectable Power-On Reset Timeout Delay

4-Pin µp Voltage Monitors with Pin-Selectable Power-On Reset Timeout Delay 19-1122; Rev 3; 12/05 4-Pin µp oltage Monitors with Pin-Selectable General Description The microprocessor (µp) supervisory circuits monitor power supplies in µp and digital systems. They provide excellent

More information

RT9166B. 600mA, Ultra-Fast Transient Response Linear Regulator. General Description. Features. Ordering Information. Applications. Pin Configurations

RT9166B. 600mA, Ultra-Fast Transient Response Linear Regulator. General Description. Features. Ordering Information. Applications. Pin Configurations Ordering Information Output Voltage 12 : 1.2V Note : Richtek products are : RoHS compliant and compatible with the current requirements of IPC/JEDEC J-STD-020. Suitable for use in SnPb or Pb-free soldering

More information

PART. Maxim Integrated Products 1

PART. Maxim Integrated Products 1 9-704; Rev 5; /09 Improved Precision Micropower General Description The is a precision two-terminal shunt mode, bandgap voltage reference with a fixed reverse breakdown voltage of.225v. Ideal for space-critical

More information

COM COM GND MAX4644 OFF OFF

COM COM GND MAX4644 OFF OFF 9-7; Rev ; / High-Speed, Low-Voltage, 4, General Description The is a single-pole/double-throw (SPDT) switch that operates from a single supply ranging from +.V to +.V. It provides low 4 on-resistance

More information

LOW HIGH OFF ON. Maxim Integrated Products 1

LOW HIGH OFF ON. Maxim Integrated Products 1 9-79; Rev ; /07 Low-Voltage, Quad, SPST General Description The MAX0/MAX/MAX are quad, low-voltage, single-pole/single-throw (SPST) analog switches. On-resistance (00Ω, max) is matched between switches

More information

Dual High-Speed 1.5A MOSFET Drivers

Dual High-Speed 1.5A MOSFET Drivers 19-132; Rev 2; 6/6 Dual High-Speed 1.A MOSFET Drivers General Description The are dual monolithic MOSFET drivers designed to tralate TTL/CMOS inputs to high voltage/current outputs. The MAX4426 is a dual

More information

MAX2232/MAX2233 PART MAX2232EEE MAX2233EEE. -40 C to +85 C 16 PQSOP 16 PQSOP. -40 C to +85 C TOP VIEW MAX2232 MAX2233 PQSOP

MAX2232/MAX2233 PART MAX2232EEE MAX2233EEE. -40 C to +85 C 16 PQSOP 16 PQSOP. -40 C to +85 C TOP VIEW MAX2232 MAX2233 PQSOP 9-47; Rev ; 4/99 µ µ PART EEE MAX22EEE TOP IEW TEMP. RANGE -4 C to + C -4 C to + C PIN-PACKAGE 6 PQSOP 6 PQSOP /MAX22 6 2 SHDN (D) CTRL (D) 4 6 7 MAX22 4 2 RAMP+ (N.C.) RAMP- (N.C.) 9 N.C. PQSOP GROUND

More information

3-Pin Microprocessor Reset Circuits

3-Pin Microprocessor Reset Circuits 19-0344; Rev 6; 12/05 3-Pin Microprocessor Reset Circuits General Description The MAX803/MAX809/MAX810 are microprocessor (µp) supervisory circuits used to monitor the power supplies in µp and digital

More information

1ppm/ C, Low-Noise, +2.5V/+4.096V/+5V Voltage References

1ppm/ C, Low-Noise, +2.5V/+4.096V/+5V Voltage References 19-123; Rev 1; 1/1 1ppm/ C, Low-Noise, +2.5V/+4.96V/+5V General Description The // are low-noise, precision voltage references with extremely low,.5ppm/ C typical temperature coefficients and excellent,

More information

SP6828/ V Low Power Voltage Inverters V OUT C1+ SP6829 C % Voltage Conversion Efficiency +1.15V to +4.2V Input Voltage Range +1.

SP6828/ V Low Power Voltage Inverters V OUT C1+ SP6829 C % Voltage Conversion Efficiency +1.15V to +4.2V Input Voltage Range +1. /689 +V Low Power Voltage Inverters 99.9% Voltage Conversion Efficiency +.V to +.V Input Voltage Range +. Guaranteed Start-up Inverts Input Supply Voltage 0µA Quiescent Current for the µa Quiescent Current

More information

2Ω, Quad, SPST, CMOS Analog Switches

2Ω, Quad, SPST, CMOS Analog Switches 9-73; Rev ; 4/ 2Ω, Quad, SPST, CMOS Analog Switches General Description The // quad analog switches feature.6ω max on-resistance (R ) when operating from a dual ±5V supply. R is matched between channels

More information

SC1462. High Output Current Charge Pump Doubler. POWER MANAGEMENT Description. Features. Applications. Typical Application Circuit

SC1462. High Output Current Charge Pump Doubler. POWER MANAGEMENT Description. Features. Applications. Typical Application Circuit Description The SC46 is a versatile charge pump designed for use in battery operated power supply applications over the wide input range of.6 to. volts. A simple, low quiescent current charge pump doubler

More information

Precision, 8-Channel/Dual 4-Channel, High-Performance, CMOS Analog Multiplexers

Precision, 8-Channel/Dual 4-Channel, High-Performance, CMOS Analog Multiplexers 9-027; Rev 2; 8/02 Precision, 8-Channel/Dual 4-Channel, General Description The / precision, monolithic, CMOS analog multiplexers (muxes) offer low on-resistance (less than 0Ω), which is matched to within

More information

TOP VIEW V L GND I/O V L GND

TOP VIEW V L GND I/O V L GND 19-1847; Rev 3; 5/9 1µA, 2Mbps, Low-Voltage Level Tralators in SC7 and µdfn General Description The MAX337/ logic-level tralators are ideal for applicatio interfacing low-voltage devices to other logic

More information

MAX6033 High-Precision, Low-Dropout SOT23 Series Voltage Reference

MAX6033 High-Precision, Low-Dropout SOT23 Series Voltage Reference MAX633 High-Precision, Low-Dropout SOT23 Series General Description The MAX633 ultra-high-precision series voltage reference features a low 7ppm/ C (max) temperature coefficient and a low dropout voltage

More information

RT9166/A. 300/600mA, Ultra-Fast Transient Response LDO Regulator. General Description. Features. Applications. Ordering Information

RT9166/A. 300/600mA, Ultra-Fast Transient Response LDO Regulator. General Description. Features. Applications. Ordering Information RT9166/A 3/6mA, Ultra-Fast Transient Response LDO Regulator General Description The RT9166/A series are CMOS low dropout regulators optimized for ultra-fast transient response. The devices are capable

More information

SC70, 1.6V, Nanopower, Beyond-the-Rails Comparators With/Without Reference

SC70, 1.6V, Nanopower, Beyond-the-Rails Comparators With/Without Reference 19-1862; Rev 4; 1/7 SC7, 1.6V, Nanopower, Beyond-the-Rails General Description The nanopower comparators in space-saving SC7 packages feature Beyond-the- Rails inputs and are guaranteed to operate down

More information

MAX14753 V DD INA0 INA1 INA2 INA3 OUT INB0 INB1 INB2 INB3

MAX14753 V DD INA0 INA1 INA2 INA3 OUT INB0 INB1 INB2 INB3 19-4255; Rev 3; 7/10 8-Channel/Dual 4-Channel General Description The are 8-to-1 and dual 4-to-1 high-voltage analog multiplexers. Both devices feature 60Ω (typ) on-resistance with 0.03Ω (typ) on-resistance

More information

Pin Configurations/Functional Diagrams/Truth Tables IN V+ GND SOT23-6* MAX4544 ON OFF OFF ON SWITCHES SHOWN FOR "0" INPUT. Maxim Integrated Products 1

Pin Configurations/Functional Diagrams/Truth Tables IN V+ GND SOT23-6* MAX4544 ON OFF OFF ON SWITCHES SHOWN FOR 0 INPUT. Maxim Integrated Products 1 9-; Rev ; / Low-Voltage, Single-Supply General Description The are precision, dual analog switches designed to operate from a single +.7V to +V supply. Low power consumption (µw) makes these parts ideal

More information

PT5108. High-PSRR 500mA LDO GENERAL DESCRIPTION FEATURES APPLICATIONS TYPICAL APPLICATIONS. Ripple Rejection vs Frequency. Ripple Rejection (db)

PT5108. High-PSRR 500mA LDO GENERAL DESCRIPTION FEATURES APPLICATIONS TYPICAL APPLICATIONS. Ripple Rejection vs Frequency. Ripple Rejection (db) GENERAL DESCRIPTION The PT5108 is a low-dropout voltage regulator designed for portable applications that require both low noise performance and board space. Its PSRR at 1kHz is better than 70dB. The PT5108

More information

5A Low Dropout Linear Regulator

5A Low Dropout Linear Regulator Solved by SP084 TM 5A Low Dropout Linear Regulator TO-- features INPUT Low Dropout oltage:. Typically at 5A Current Limiting and Thermal Protection Output Current: 5A Current Limit:.5A Operating Junction

More information

MAX14760/MAX14762/MAX14764 Above- and Below-the-Rails Low-Leakage Analog Switches

MAX14760/MAX14762/MAX14764 Above- and Below-the-Rails Low-Leakage Analog Switches 19-652; Rev ; 9/11 EVALUATION KIT AVAILABLE MAX1476// General Description The MAX1476// analog switches are capable of passing bipolar signals that are beyond their supply rails. These devices operate

More information

OBSOLETE - PART DISCONTINUED

OBSOLETE - PART DISCONTINUED General Description The series are three terminal positive regulators designed for a wide variety of applications including local, on-card regulation. The are complete with internal current limiting, thermal

More information

RT9184A. Dual, Ultra-Fast Transient Response, 500mA LDO Regulator. General Description. Features. Pin Configuration. Applications

RT9184A. Dual, Ultra-Fast Transient Response, 500mA LDO Regulator. General Description. Features. Pin Configuration. Applications RT9184A Dual, Ultra-Fast Transient Response, 500mA LDO Regulator General Description The RT9184A series are an efficient, precise dual-channel CMOS LDO regulator optimized for ultra-low-quiescent applications.

More information

28V, 100mA, Low-Quiescent-Current LDO with Reset and Power-Fail Input/Output

28V, 100mA, Low-Quiescent-Current LDO with Reset and Power-Fail Input/Output General Description The high-voltage linear regulator is designed to operate from a +5V to +28V input voltage, and withstands up to 4V transients. The device consumes only 45μA of quiescent current at

More information

3-Pin Microprocessor Reset Circuits

3-Pin Microprocessor Reset Circuits 19-0344; Rev 7; 2/10 3-Pin Microprocessor Reset Circuits General Description The MAX803/MAX809/MAX810 are microprocessor (µp) supervisory circuits used to monitor the power supplies in µp and digital systems.

More information

Ultra-Low Output Voltage, Low-Quiescent-Current Linear Regulator for High-Temperature Applications

Ultra-Low Output Voltage, Low-Quiescent-Current Linear Regulator for High-Temperature Applications General Description The MAX16999 linear regulator operates from a 2. to 5. input voltage and delivers 1mA continuous load current with a low quiescent current typically around 13μA. The output voltage

More information

AME. High PSRR, Low Noise, 600mA CMOS Regulator AME8855. n General Description. n Typical Application. n Features. n Functional Block Diagram

AME. High PSRR, Low Noise, 600mA CMOS Regulator AME8855. n General Description. n Typical Application. n Features. n Functional Block Diagram 8855 n General Description n Typical Application The 8855 family of positive, CMOS linear regulators provide low dropout voltage(42mv@6ma), low quiescent current, and low noise CMOS LDO. These rugged devices

More information

RT9166/A. 300/600mA, Ultra-Fast Transient Response LDO Regulator. General Description. Features. Applications. Ordering Information

RT9166/A. 300/600mA, Ultra-Fast Transient Response LDO Regulator. General Description. Features. Applications. Ordering Information RT9166/A 300/600mA, Ultra-Fast Transient Response LDO Regulator General Description The RT9166/A series are CMOS low dropout regulators optimized for ultra-fast transient response. The devices are capable

More information

AME. High PSRR, Low Noise, 300mA CMOS Regulator AME8853. n General Description. n Typical Application. n Features. n Functional Block Diagram

AME. High PSRR, Low Noise, 300mA CMOS Regulator AME8853. n General Description. n Typical Application. n Features. n Functional Block Diagram 8853 n General Description n Typical Application The 8853 family of positive, CMOS linear regulators provide low dropout voltage(220mv@300ma), low quiescent current, and low noise CMOS LDO. These rugged

More information

Low-Voltage, 8-Channel/Dual 4-Channel Multiplexers with Latchable Inputs

Low-Voltage, 8-Channel/Dual 4-Channel Multiplexers with Latchable Inputs 9-396; Rev. ; 5/95 Low-Voltage, 8-Channel/Dual 4-Channel General Description The are low-voltage, CMOS, -of-8 and dual 4-channel muxes with latchable digital inputs. They feature low-voltage operation

More information

Maxim Integrated Products 1

Maxim Integrated Products 1 19-4187; Rev 4; 7/1 μ μ PART AMPS PER PACKAGE PIN- PACKAGE + * TOP MARK MAX965AZK+ 1 5 SOT3 ADSI MAX965AZK/V+ 1 5 SOT3 ADSK MAX965AUA+ 1 8 μmax-ep* AABI MAX965ATA+ 1 8 TDFN-EP* BKX MAX9651AUA+ 8 μmax-ep*

More information

Bay Linear. 1.0Amp Low Dropout Voltage Regulator B1117

Bay Linear. 1.0Amp Low Dropout Voltage Regulator B1117 Bay Linear Inspire the Linear Power 1.Amp Low Dropout oltage Regulator B1117 Adjustable & Fix (.4olt Dropout) Description The Bay Linear B1117 is a three terminal positive NPN regulator offered as adjustable

More information

MAX TEMPCO. INITIAL ERROR (ppm/ C) Plastic DIP 8 CERDIP 8 Plastic DIP 0 C to +70 C Plastic DIP 8 SO REF01CZ 0 C to +70 C 65 ±100

MAX TEMPCO. INITIAL ERROR (ppm/ C) Plastic DIP 8 CERDIP 8 Plastic DIP 0 C to +70 C Plastic DIP 8 SO REF01CZ 0 C to +70 C 65 ±100 19-0887; Rev 1; 8/99 General Description The REF01 and REF02 are precision voltage references that are pretrimmed to within ±3% of +10V and +5V, respectively. Both references feature excellent temperature

More information

MAX TEMPCO (ppm/ C) INITIAL ERROR (mv)

MAX TEMPCO (ppm/ C) INITIAL ERROR (mv) 19-0887; Rev 7; /07 General Description The are industry-standard precision voltage references. The stable 10V output of the REF01 can be adjusted over a ±% range with minimal effect on temperature stability.

More information

MAX6043 Precision High-Voltage Reference in SOT23

MAX6043 Precision High-Voltage Reference in SOT23 MAX643 General Description The MAX643 precision voltage reference provides accurate preset +, +3.3V, +4.96V, +5.V, and +1V reference voltages from up to +4V input voltages. The MAX643 features a proprietary

More information

28V, 100mA, Low-Quiescent-Current LDO with Reset and Power-Fail Input/Output

28V, 100mA, Low-Quiescent-Current LDO with Reset and Power-Fail Input/Output 19-654; Rev ; 11/6 General Description The high-voltage linear regulator is designed to operate from a +5V to +28V input voltage, and withstands up to 4V transients. The device consumes only 45µA of quiescent

More information

Precision, Quad, SPDT, CMOS Analog Switch

Precision, Quad, SPDT, CMOS Analog Switch 19-0189; Rev 1; 6/99 Precision, Quad, SPDT, MOS Analog Switch General Description The is a precision, quad, single-pole doublethrow (SPDT) analog switch. The four independent switches operate with bipolar

More information

35Ω, Low-Voltage, SPST/SPDT Analog Switches in UCSP Package

35Ω, Low-Voltage, SPST/SPDT Analog Switches in UCSP Package 19-1994; Rev 3; 2/3 35, Low-Voltage, SPST/SPDT General Description The low on-resistance (R ON ), low-voltage analog switches operate from a single +2.V to +5.5V supply. The / are single-pole/single-throw

More information

Description. Part numbers. AB version C version Output voltage LD2980ABM30TR LD2980ABM33TR LD2980CM33TR 3.3 V LD2980ABM50TR LD2980CM50TR 5.

Description. Part numbers. AB version C version Output voltage LD2980ABM30TR LD2980ABM33TR LD2980CM33TR 3.3 V LD2980ABM50TR LD2980CM50TR 5. Features SOT23-5L Stable with low ESR ceramic capacitors Ultra low dropout voltage (0.12 V typ. at 50 ma load, 7 mv typ. at 1 ma load) Very low quiescent current (80 µa typ. at no load in on mode; max

More information

PART TOP VIEW. Maxim Integrated Products 1

PART TOP VIEW. Maxim Integrated Products 1 9-96; Rev ; 2/ 45, SPDT Analog Switch in SOT23-8 General Description The is a dual-supply, single-pole/doublethrow (SPDT) analog switch. On-resistance is 45 max and flat (7 max) over the specified signal

More information

Low Input Voltage, Low-Dropout 200mA Linear Regulator

Low Input Voltage, Low-Dropout 200mA Linear Regulator Low Input Voltage, Low-Dropout 200mA Linear Regulator Description The is a CMOS low dropout, positive linear regulator with input voltage down to about 1.65V. The can deliver a guaranteed 200mA load current

More information

AME. High PSRR, Low Noise, 600mA CMOS Regulator AME8855. General Description. Typical Application. Features. Functional Block Diagram.

AME. High PSRR, Low Noise, 600mA CMOS Regulator AME8855. General Description. Typical Application. Features. Functional Block Diagram. 8855 General Description Typical Application The 8855 family of positive, CMOS linear regulators provide low dropout voltage(42mv@6ma), low quiescent current, and low noise CMOS LDO. These rugged devices

More information

MAX701 N.C. GND DIP/SO

MAX701 N.C. GND DIP/SO 9-90; Rev ; /0 Power-Supply Monitor with Reset General Description The MAX00/MAX0/MAX0 are supervisory circuits used to monitor the power supplies in microprocessor (µp) and digital systems. The / outputs

More information

3.5Ω (max) at +3V PART. MAX4733EUA -40 C to +85 C 8 µmax MAX4732. Pin Configurations/Functional Diagrams/Truth Tables TOP VIEW (BUMPS ON BOTTOM) NC1

3.5Ω (max) at +3V PART. MAX4733EUA -40 C to +85 C 8 µmax MAX4732. Pin Configurations/Functional Diagrams/Truth Tables TOP VIEW (BUMPS ON BOTTOM) NC1 9-264; Rev 2 2/6 Ω, Dual SPST Analog Switches in UCSP General Description The MAX473// low-voltage, dual, single-pole/single-throw (SPST) analog switches operate from a single +2V to +V supply and handle

More information

GENERAL DESCRIPTION The PT5128 is a dual channel low-dropout voltage regulator designed for portable and wireless applications that require high PSRR, low quiescent current and excellent line and load

More information

PRODUCTION DATA SHEET

PRODUCTION DATA SHEET The positive voltage linear regulator is configured with a fixed 3.3V output, featuring low dropout, tight line, load and thermal regulation. VOUT is controlled and predictable as UVLO and output slew

More information

ON OFF PART. Pin Configurations/Functional Diagrams/Truth Tables 5 V+ LOGIC

ON OFF PART. Pin Configurations/Functional Diagrams/Truth Tables 5 V+ LOGIC 9-88; Rev ; /7 25Ω SPST Analog Switches in SOT23-6 General Description The are dual-supply single-pole/single-throw (SPST) switches. On-resistance is 25Ω max and flat (2Ω max) over the specified signal

More information

Pin Configurations/Functional Diagrams/Truth Tables IN V+ GND SOT23-6* MAX4544 ON OFF OFF ON SWITCHES SHOWN FOR "0" INPUT. Maxim Integrated Products 1

Pin Configurations/Functional Diagrams/Truth Tables IN V+ GND SOT23-6* MAX4544 ON OFF OFF ON SWITCHES SHOWN FOR 0 INPUT. Maxim Integrated Products 1 9-; Rev ; / Low-Voltage, Single-Supply General Description The MAX MAX are precision, dual analog switches designed to operate from a single +.V to +V supply. Low power consumption (µw) makes these parts

More information

Precision, 16-Channel/Dual 8-Channel, Low-Voltage, CMOS Analog Multiplexers

Precision, 16-Channel/Dual 8-Channel, Low-Voltage, CMOS Analog Multiplexers / Precision, 6-Channel/Dual 8-Channel, General Description The / low-voltage, CMOS analog multiplexers (muxes) offer low on-resistance (Ω max), which is matched to within 6Ω between switches and remains

More information

Monolithic CMOS Analog Multiplexers

Monolithic CMOS Analog Multiplexers 19-008; Rev 3; 9/01 Monolithic CMOS Analog Multiplexers General escription Maxim s and are monolithic CMOS analog multiplexers (muxes): the is a single 8-channel (1-of-8) mux, and the is a differential

More information

Current-Limit Switches

Current-Limit Switches General Description The MAX2316 programmable current-limit switches feature internal current limiting to prevent damage to host devices due to faulty load conditions. These current-limit switches feature

More information

ST2L Very low quiescent current dual voltage regulator. Description. Features. Applications

ST2L Very low quiescent current dual voltage regulator. Description. Features. Applications Very low quiescent current dual voltage regulator Description Datasheet - production data Features DFN8 (5x6 mm) V O1 : fixed V O2 : adjustable from 1.25 to V I - V DROP Guaranteed current of output 1:

More information

3-TERMINAL POSITIVE LINEAR REGULATOR General Description. Features. Applications

3-TERMINAL POSITIVE LINEAR REGULATOR General Description. Features. Applications General Description The series are three terminal positive regulators with several fixed output voltages. These regulators can provide local on card regulation, eliminating the distribution problems associated

More information

SEMICONDUCTOR TECHNICAL DATA KIA78L05F~KIA78L24F THREE TERMINAL POSITIVE VOLTAGE REGULATORS 5V, 6V, 8V, 9V, 10V, 12V, 15V, 18V, 20V, 24V.

SEMICONDUCTOR TECHNICAL DATA KIA78L05F~KIA78L24F THREE TERMINAL POSITIVE VOLTAGE REGULATORS 5V, 6V, 8V, 9V, 10V, 12V, 15V, 18V, 20V, 24V. SEMICONDUCTOR TECHNICAL DATA KIA78L05F~KIA78L4F BIPOLAR LINEAR INTEGRATED THREE TERMINAL POSITIE OLTAGE REGULATORS 5, 6, 8, 9, 0,, 5, 8, 0, 4. A C H FEATURES G Best Suited to Power Supply for TTL, C -MOS.

More information

Low Voltage 2-1 Mux, Level Translator ADG3232

Low Voltage 2-1 Mux, Level Translator ADG3232 Low Voltage 2-1 Mux, Level Translator ADG3232 FEATURES Operates from 1.65 V to 3.6 V Supply Rails Unidirectional Signal Path, Bidirectional Level Translation Tiny 8-Lead SOT-23 Package Short Circuit Protection

More information

(Note 1) RH1086M ADJ 15V CAPACITOR(S) NOT SHOWN BOTTOM VIEW BOTTOM VIEW V IN ADJ 2 INPUT 1 FINAL SPECIFICATIONS SUBJECT TO CHANGE

(Note 1) RH1086M ADJ 15V CAPACITOR(S) NOT SHOWN BOTTOM VIEW BOTTOM VIEW V IN ADJ 2 INPUT 1 FINAL SPECIFICATIONS SUBJECT TO CHANGE RH086M and. Low Dropout Positive djustable Regulators DESCRIPTION The RH086M positive adjustable regulator is designed to provide for the H package and. for the K package with higher efficiency than currently

More information

1μA Ultra-Tiny Shunt Voltage Reference

1μA Ultra-Tiny Shunt Voltage Reference EVALUATION KIT AVAILABLE MAX6069 General Description The MAX6069 ultra-low-power shunt references are ideal for space-critical and low-power applications. They are offered in a 4-bump wafer-level package

More information

CM1117F 1A LOW DROPOUT VOLTAGE REGULATOR

CM1117F 1A LOW DROPOUT VOLTAGE REGULATOR GENERAL DESCRIPTION FEATURES The series of adjustable and fixed voltage regulators are designed to provide 1A for applications requiring high efficiency. All internal circuitry is designed to operated

More information

LE Ω SECOND SOURCE BLEED RESISTORS PART. Maxim Integrated Products 1 MAX4800A MAX4802A. TQFP 7mm x 7mm ; Rev 0; 5/08 N.C. (RGND) TOP VIEW GND

LE Ω SECOND SOURCE BLEED RESISTORS PART. Maxim Integrated Products 1 MAX4800A MAX4802A. TQFP 7mm x 7mm ; Rev 0; 5/08 N.C. (RGND) TOP VIEW GND 19-4120; Rev 0; 5/08 Ω Ω μ TOP VIEW DIN VDD GND (RGND) VNN 36 35 34 33 32 31 30 29 28 27 26 25 PART BED RESISTORS SECOND SOURCE PIN- PACKAGE CXZ+* No 26 CSBGA CQI+ No HV2203PJ-G 28 PLCC CCM+* No HV2203FG-G

More information

MAX4636EUB -40 C to +85 C 10 µmax 1 NO1 IN1 GND. 3 x 3 THIN QFN OFF ON ON OFF SWITCHES SHOWN FOR "0" INPUT. Maxim Integrated Products 1

MAX4636EUB -40 C to +85 C 10 µmax 1 NO1 IN1 GND. 3 x 3 THIN QFN OFF ON ON OFF SWITCHES SHOWN FOR 0 INPUT. Maxim Integrated Products 1 9-79; Rev ; /3 Fast, Low-Voltage, Dual 4 SPDT General Description The are fast, dual 4 singlepole/double-throw (SPDT) analog switches that operate with supply voltages from +.8V to +.V. High switching

More information

LP8340 Low Dropout, Low I Q, 1.0A CMOS Linear Regulator

LP8340 Low Dropout, Low I Q, 1.0A CMOS Linear Regulator LP8340 Low Dropout, Low I Q, 1.0A CMOS Linear Regulator General Description The LP8340 low-dropout CMOS linear regulator is available in 5, 3.3, 2.5, 1.8 and adjustable output versions. Packaged in the

More information

Distributing Tomorrow s Technologies For Today s Designs Toll-Free:

Distributing Tomorrow s Technologies For Today s Designs Toll-Free: 2W, Ultra-High Isolation DIP, Single & DC/DC s Key Features Low Cost 6 Isolation MTBF > 6, Hours Short Circuit Protection Input, and 24 Output,, 1, {, { and {1 Regulated Outputs Low Isolation Capacitance

More information

KD A LOW DROP POSITIVE VOLTAGE REGULATOR ADJUSTABLE AND FIXED

KD A LOW DROP POSITIVE VOLTAGE REGULATOR ADJUSTABLE AND FIXED 7.5A LOW DROP POSITIVE VOLTAGE REGULATOR ADJUSTABLE AND FIXED THREE TERMINAL ADJUSTABLE OR FIXED OUTPUT VOLTAGE 1.5V,1.8V, 2.5V, 3.0, 3.3V OUTPUT CURRENT UP TO 7.5A 1.4V MAX DROPOUT VOLTAGE AT FULL LOAD

More information

with Manual Reset and Watchdog Timer

with Manual Reset and Watchdog Timer General Description The MAX6821 MAX6825 are low-voltage microprocessor (µp) supervisory circuits that combine voltage monitoring, watchdog timer, and manual reset input functions in a 5-pin SOT23 package.

More information

5 8 LED MAX6950/MAX6951 MAX6950/MAX6951 SPI TM QSPI TM MICROWIRE TM 7 LED LED 2.7V MAX LED MAX LED 16 (0-9 A-F) RAM 16 7 LED LED

5 8 LED MAX6950/MAX6951 MAX6950/MAX6951 SPI TM QSPI TM MICROWIRE TM 7 LED LED 2.7V MAX LED MAX LED 16 (0-9 A-F) RAM 16 7 LED LED 19-2227; Rev 1; 12/01 +2.7V SPI TM QSPI TM MICROWIRE TM 7 2.7V MAX6950 5 7 40 MAX6951 8 7 64 16 (0-9 A-F) RAM 16 7 EMI ( 1 8 ) 26MHz SPI/QSPI/MICROWIRE +2.7V 16 / EMI 75µA ( ) 16 QSOP PART TEMP. RANGE

More information

L4970A 10A SWITCHING REGULATOR

L4970A 10A SWITCHING REGULATOR L4970A 10A SWITCHING REGULATOR 10A OUTPUT CURRENT.1 TO 40 OUTPUT OLTAGE RANGE 0 TO 90 DUTY CYCLE RANGE INTERNAL FEED-FORWARD LINE REGULA- TION INTERNAL CURRENT LIMITING PRECISE.1 ± 2 ON CHIP REFERENCE

More information

Applications LED READY = READY LED READY LED. Charge mode indicator. max 140 C Shunt Sense Osc. Figure 1 Block diagram with external circuit

Applications LED READY = READY LED READY LED. Charge mode indicator. max 140 C Shunt Sense Osc. Figure 1 Block diagram with external circuit Charge Timer Description The molithic integrated bipolar circuit is a time controlled constant current charger. Selection of charge current versus timing is according to external components at pins 2,

More information

1.2 V to 5.5 V, Slew Rate Controlled Load Switch in TSOT23-6

1.2 V to 5.5 V, Slew Rate Controlled Load Switch in TSOT23-6 1.2 V to 5.5 V, Slew Rate Controlled Load Switch in TSOT23-6 DESCRIPTION is a slew rate controlled load switches designed for 1.2 V to 5.5 V operation. The switch element is of n-channel device that provides

More information

MM74HC4020 MM74HC Stage Binary Counter 12-Stage Binary Counter

MM74HC4020 MM74HC Stage Binary Counter 12-Stage Binary Counter MM74HC4020 MM74HC4040 14-Stage Binary Counter 12-Stage Binary Counter General Description The MM54HC4020/MM74HC4020, MM54HC4040/ MM74HC4040, are high speed binary ripple carry counters. These counters

More information

Precision, Quad, SPST Analog Switches

Precision, Quad, SPST Analog Switches 9-8; Rev ; 9/ Precision, Quad, SPST Analog Switches General Description The are precision, quad, single-pole single-throw (SPST) analog switches. The MAX364 has four normally closed (N), and the MAX365

More information

3-Pin, Low-Power μp Reset Circuits MAX6800/MAX6801/ MAX6802. Benefits and Features. General Description. Typical Operating Circuit.

3-Pin, Low-Power μp Reset Circuits MAX6800/MAX6801/ MAX6802. Benefits and Features. General Description. Typical Operating Circuit. General Description The MAX6800/MAX6801/ microprocessor (μp) supervisory circuits monitor the power supplies in 2.85 to 5.0 μp and digital systems. They increase circuit reliability and reduce cost by

More information

SERIALLY PROGRAMMABLE CLOCK SOURCE. Features

SERIALLY PROGRAMMABLE CLOCK SOURCE. Features DATASHEET ICS307-03 Description The ICS307-03 is a dynamic, serially programmable clock source which is flexible and takes up minimal board space. Output frequencies are programmed via a 3-wire SPI port.

More information

ST3L01 TRIPLE VOLTAGE REGULATOR

ST3L01 TRIPLE VOLTAGE REGULATOR TRIPLE VOLTAGE REGULATOR DUAL INPUT VOLTAGE (12V AND 5V) TRIPLE OUTPUT VOLTAGE (2.6V, 3.3V, 8V) 2.6V GUARANTEED I OUT UP TO 1.2A 3.3V GUARANTEED I OUT UP TO 1.0A 8V GUARANTEED I OUT UP TO 200mA THERMAL

More information

Dual Ultra-Low-Voltage SOT23 µp Supervisors with Manual Reset and Watchdog Timer

Dual Ultra-Low-Voltage SOT23 µp Supervisors with Manual Reset and Watchdog Timer Dual Ultra-Low-oltage SOT23 µp Supervisors with General Description The 6826 6831 are ultra-low-voltage microprocessor (µp) supervisory circuits designed to monitor two power supplies and have manual reset

More information

CM1117 1A LOW DROPOUT VOLTAGE REGULATOR

CM1117 1A LOW DROPOUT VOLTAGE REGULATOR GENERAL DESCRIPTION FEATURES The CM1117 series of adjustable and fixed voltage regulators are designed to provide 1A for applications requiring high efficiency. All internal circuitry is designed to operated

More information

FAN ma, Low-IQ, Low-Noise, LDO Regulator

FAN ma, Low-IQ, Low-Noise, LDO Regulator April 2014 FAN25800 500 ma, Low-I Q, Low-Noise, LDO Regulator Features V IN: 2.3 V to 5.5 V V OUT = 3.3 V (I OUT Max. = 500 ma) V OUT = 5.14 V (I OUT Max. = 250 ma) Output Noise Density at 250 ma and 10

More information

Analog Integrations Corporation 4F, 9 Industry E. 9th Rd, Science-Based Industrial Park, Hsinchu, Taiwan DS

Analog Integrations Corporation 4F, 9 Industry E. 9th Rd, Science-Based Industrial Park, Hsinchu, Taiwan DS Triple-Output LCD Power Supply FEATURES One Low Dropout Linear Regulator Dropout Voltage 500mV at 0.3A Output Current Dual Adjustable Charge Pump Up to +30V Positive Output Down to -0V Negative Output

More information