MAX TEMPCO (ppm/ C) INITIAL ERROR (mv)

Size: px

Start display at page:

Download "MAX TEMPCO (ppm/ C) INITIAL ERROR (mv)"

Melvyn Copeland
6 years ago
Views:

1 ; Rev 7; /07 General Description The are industry-standard precision voltage references. The stable 10V output of the REF01 can be adjusted over a ±% range with minimal effect on temperature stability. The V output REF0 can also be adjusted over a ±% range. The 10V REF01 has a single-supply operation over an input voltage range of 13V to 33V, while the V REF0 has a single-supply operation over an input voltage range of 7V to 33V. Both devices offer a low-current drain of 1mA. The REF0 also provides a TEMP pin whose output voltage varies linearly with temperature, making this device suitable for a wide variety of temperature-sensing and control applications. For new designs, refer to the MAX03 or MAX13 data sheets. +V, +10V Precision Features Pretrimmed to +V, +10V Excellent Temperature Stability: 3ppm/ C (typ) Low Noise: 10µV P-P (REF0) Short-Circuit Protected Linear Temperature Transducer Output (REF0) Ordering Information PART TEMP RANGE MAX TEMPCO (ppm/ C) INITIAL ERROR (mv) PIN-PACKAGE REF01EP 0 C to +70 C 8. ±30 8 Plastic DIP P8- REF01EP+ 0 C to +70 C 8. ±30 8 Plastic DIP P8- REF01HP 0 C to +70 C ±0 8 Plastic DIP P8- REF01HP+ 0 C to +70 C ±0 8 Plastic DIP P8- REF01HSA 0 C to +70 C ±0 8 SO S8- REF01HSA+ 0 C to +70 C ±0 8 SO S8- REF01CP 0 C to +70 C ±100 8 Plastic DIP P8- REF01CP+ 0 C to +70 C ±100 8 Plastic DIP P8- REF01CSA 0 C to +70 C ±100 8 SO S8- REF01CSA+ 0 C to +70 C ±100 8 SO S8- REF01CESA -0 C to +8 C ±100 8 SO S8- REF01CESA+ -0 C to +8 C ±100 8 SO S8- +Denotes a lead-free package. Ordering Information continued at end of data sheet. PKG CODE Analog-to-Digitial Converters Digitial-to-Analog Converters Digital Voltmeters Voltage Regulators Threshold Detectors Applications Typical Operating Circuit +1V REF01 REF0 R P 10kΩ OUTPUT REFERENCE WITH MED OUTPUT. Maxim Integrated Products 1 For pricing, delivery, and ordering information, please contact Maxim/Dallas Direct! at , or visit Maxim s website at

2 +V, +10V Precision ABSOLUTE MAXIMUM RATINGS REF01 Input Voltage REF01, E, H...0V REF01C...30V Continuous Power Dissipation Plastic Dip (P) (derate at.mw/ C above +3 C)...00mW Small Outline (S) (derate at.0mw/ C above + C)..300mW Stresses beyond those listed under Absolute Maximum Ratings may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated in the operational sections of the specifications is not implied. Exposure to absolute maximum rating conditions for extended periods may affect device reliability. ELECTRICAL CHARACTERISTICS REF01E/REF01H ( = +1V, T A = + C, unless otherwise noted.) Output Short-Circuit Duration (to ground or )...Indefinite Storage Temperature Range...- C to +10 C Operating Temperature Range REF01E, REF01H, REF01C (except REF01CESA)...0 C to +70 C REF01CESA...-0 C to +8 C Lead Temperature (soldering, 0s) C REF01E REF01H Output Voltage I L = V Output Adjustment Range Vtrim R P = 10kΩ ±3.0 ±.0 ±3.0 ±.0 % Output Voltage Noise enp-p 0.1Hz to 10Hz (Note 1) µv P-P Line Regulation = 13V to 33V (Note ) %/V Load Regulation I L = 0 to 10mA (Note ) %/ma Turn-On Settling Time t ON To ±0.1% of final value µs Quiescent Supply Current I SY No load ma Load Current I L To specified output voltage tolerance Sink Current I S To specified output voltage tolerance ma ma Short-Circuit Current I SC = 0V ma ELECTRICAL CHARACTERISTICS REF01E/REF01H ( = +1V, 0 C T A +70 C for REF01E and REF01H, I L = 0mA, unless otherwise noted.) REF01E REF01H Output Voltage Change with Temperature T 0 C T A +70 C (Note 3) % Output Voltage Temperature Coefficient Change in VO Temperature Coefficient with Output Adjustment TC (Note ) ppm/ C RP = 10kΩ ppm/% Line Regulation (VIN = 13V to 33V) Load Regulation (IL = 0 to 8mA) 0 C T A +70 C (Note ) 0 C T A +70 C (Note ) %/V %/ma

3 +V, +10V Precision ELECTRICAL CHARACTERISTICS REF01C ( = +1V, T A = + C, I L = 0mA, unless otherwise noted.) REF01C MIN TYP MAX Output Voltage I L = 0mA V Output Adjustment Range V trim R P = 10kΩ ±.7 ±.0 % Output Voltage Noise e np-p 0.1Hz to 10Hz (Note 1) 3 µvp-p Line Regulation = 13V to 30V (Note ) %/V Load Regulation (Note ) IL = 0 to 8mA %/ma IL = 0 to ma Turn-On Settling Time ton To ±0.1% of final value 00 µs Quiescent Supply Current ISY No load ma Load Current IL To specified output voltage tolerance 8 1 ma Sink Current IS To specified output voltage tolerance ma Short-Circuit Current ISC VO = 0V 30 ma ELECTRICAL CHARACTERISTICS REF01C ( = +1V, T A = T MIN to T MAX, unless otherwise noted.) REF01C MIN TYP MAX Output Voltage Change with Temperature Output Voltage Temperature Coefficient Change in VO Temperature Coefficient with Output Adjustment VOT (Note 3) % TCVO (Note ) 0 ppm/ C RP = 10kΩ 0.7 ppm/% Line Regulation VIN = 13V to 30V (Note ) %/V Load Regulation IL = 0 to ma (Note ) %/ma Note 1: Guaranteed by design. Note : Line and load regulation specifications include the effect of self heating. 100% production tested at T A = + C and guaranteed by design for T A = T MIN to T MAX, as specified. Note 3: T is defined as the absolute difference between the maximum output voltage and the minimum output voltage over the specified temperature range expressed as a percentage of 10V. Guaranteed by design. T = VMAX -VMIN 10V 100 Note : TC is defined as T divided by the temperature range. Guaranteed by design. Output Adjustment The REF01 trim terminal can be used to adjust the voltage over a 10V ±00mV range. This feature allows the system designer to trim system errors by setting the reference to a voltage other than 10V, including 10.0V for binary applications (see the Typical Operating Circuit). Adjustment of the output does not significantly affect the temperature performance of the device. The temperature coefficient change is approximately 0.7ppm/ C for 100mV of output adjustment. 3

4 +V, +10V Precision ABSOLUTE MAXIMUM RATINGS REF0 Input Voltage REF0, E, H...0V REF0C...30V Continuous Power Dissipation Plastic Dip (P) (derate at.mw/ C above +3 C)...00mW Small Outline (S) (derate at.0mw/ C above + C)..300mW Storage Temperature Range...- C to +10 C ELECTRICAL CHARACTERISTICS REF0E/REF0H ( = +1V, T A = + C, unless otherwise noted.) Operating Temperature Range REF0E, REF0H...0 C to +70 C REF0C (except REF0CESA)...0 C to +70 C REF0CESA...-0 C to +8 C Output Short-Circuit Duration (to ground or )...Indefinite Lead Temperature (soldering, 0s) C Stresses beyond those listed under Absolute Maximum Ratings may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated in the operational sections of the specifications is not implied. Exposure to absolute maximum rating conditions for extended periods may affect device reliability. REF0E REF0H Output Voltage VO IL = V Output Adjustment Range Vtrim RP = 10kΩ ±3 ± ±3 ± % Output Voltage Noise enp-p 0.1Hz to 10Hz (Note ) µvp-p Line Regulation VIN = 8V to 33V (Note ) %/V Load Regulation IL = 0 to 10mA (Note ) %/ma Turn-On Settling Time ton To ±0.1% of final value µs Quiescent Supply Current ISY No load ma Load Current IL To specified output voltage tolerance ma Sink Current IS To specified output voltage tolerance ma Short-Circuit Current ISC VO = 0V ma T em p e r a t ur e V ol ta g e Ou tp u t VT (Note 7) mv ELECTRICAL CHARACTERISTICS REF0E/REF0H ( = +1V, 0 C T A +70 C for REF0E and REF0H, I L = 0mA, unless otherwise noted.) REF0E REF0H Output Voltage Change with Temperature VOT 0 C TA +70 C (Note 8) % Output Voltage Temperature Coefficient Change in VO Temperature Coefficient with Output Adjustment TCVO (Note 9) ppm/ C RP = 10kΩ ppm/% Line Regulation (V I N = 8V to 33V) Load Regulation (IL = 0 to 8mA) 0 C TA +70 C (Note ) 0 C TA +70 C (Note ) %/V %/ma

5 +V, +10V Precision ELECTRICAL CHARACTERISTICS REF0E/REF0H (continued) ( = +1V, 0 C T A +70 C for REF0E and REF0H, I L = 0mA, unless otherwise noted.) REF0E REF0H Temperature Voltage Output TCVT (Note 7).1.1 mv/ C Temperature Coefficient ELECTRICAL CHARACTERISTICS REF0C ( = +1V, T A = + C, unless otherwise noted.) REF0C MIN TYP MAX Output Voltage VO IL = 0mA V Output Adjustment Range Vtrim RP = 10kΩ ±.7 ±.0 % Output Voltage Noise enp-p 0.1Hz to 10Hz (Note ) 1 18 µvp-p Line Regulation VIN = 8V to 30V (Note ) %/V Load Regulation (Note ) IL = 0 to 8mA IL = 0 to ma %/ma Turn-On Settling Time ton To ±0.1% of final value 30 µs Quiescent Supply Current ISY No load ma Load Current IL To specified output voltage tolerance 8 1 ma Sink Current IS To specified output voltage tolerance ma Short-Circuit Current ISC VO = 0V 30 ma Temperature Voltage Output VT (Note 7) 30 mv ELECTRICAL CHARACTERISTICS REF0C ( = +1V, T A = T MIN to T MAX, I L = 0mA, unless otherwise noted.) REF0C MIN TYP MAX Output Voltage Change with Temperature Output Voltage Temperature Coefficient Change in VO Temperature Coefficient with Output Adjustment VOT (Note 8) % TCVO (Note 9) 0 ppm/ C RP = 10kΩ 0.7 ppm/% Line Regulation VIN = 8V to 30V (Note ) %/V Load Regulation IL = 0 to ma (Note ) %/ma Temperature Voltage Output Temperature Coefficient TCVT (Note 7).1 mv/ C

6 +V, +10V Precision ELECTRICAL CHARACTERISTICS REF0 (continued) ( = +1V, T A = T MIN to T MAX, I L = 0mA, unless otherwise noted.) Note : Guaranteed by design. Note : Line and load regulation specifications include the effect of self heating. 100% production tested at T A = + C and guaranteed by design for T A = T MIN to T MAX, as specified. Note 7: Limit current in or out of pin 3 to 0nA and capacitance on pin 3 to 30pF. Note 8: T is defined as the absolute difference between the maximum output voltage and the minimum output voltage over the specified temperature range expressed as a percentage of V. Guaranteed by design. T = VMAX -VMIN V 100 Note 9: TC is defined as T divided by the temperature range. Guaranteed by design. Output Adjustment The REF0 trim terminal can be used to adjust the output voltage over a V ±300mV range. This feature allows the system designer to trim system errors by setting the reference to a voltage other than V (refer to the Typical Operating Circuit). Adjustment of the output does not significantly affect the temperature performance of the device. Typically, the temperature coefficient change is 0.7ppm/ C for 100mV of output adjustment. Temperature Voltage Output The REF0 provides a temperature-dependent output voltage on the TEMP pin. This voltage is proportional to the absolute temperature, and has a scale factor of approximately.1mv/ C (Figure 1). Output Voltage =.1(T + 73)mV where T = Temperature in C. TEMP VOLTAGE OUTPUT (mv) Figure 1. REF0 Temperature/Voltage Output vs. Temperature

7 +V, +10V Precision (T A = + C, unless otherwise noted.) LINE REGULATION (db) 7 3 LINE REGULATION vs. FREQUENCY = 1V T A = + C REF01/0 TOC01 OUTPUT NOISE (µvp-p) 10, REF01 OUTPUT WIDEBAND NOISE vs. BANDWIDTH (0.1Hz TO FREQUENCY INDICATED) Typical Operating Characteristics = 1V T A = + C REF01/0 TOC0 OUTPUT NOISE (µvp-p) 10, REF0 OUTPUT WIDEBAND NOISE vs. BANDWIDTH (0.1Hz TO FREQUENCY INDICATED) = 1V T A = + C REF01/0 TOC k 10k 100k 1M FREQUENCY (Hz) k 10k 100k 1M FREQUENCY (Hz) k 10k 100k 1M FREQUENCY (Hz) MAXIMUM LOAD CURRENT (ma) MAXIMUM LOAD CURRENT vs. INPUT VOLTAGE SHORT-CIRCUIT PROTECTION 00mW MAXIMUM DISSIPATION T A = + C INPUT VOLTAGE (V) REF01/0 TOC0 LOAD REG (T)/LOAD REG (+ C) = 1V NORMALIZED LOAD REGULATION ( I L = 10mA) vs. TEMPERATURE REF01/0 TOC0 LOAD REG (T)/LOAD REG (+ C) NORMALIZED LINE REGULATION vs. TEMPERATURE REF01/0 TOC0 MAXIMUM LOAD CURRENT (ma) MAXIMUM LOAD CURRENT vs. TEMPERATURE = 1V REF01/0 TOC07 QUIESCENT CURRENT (ma) = 1V QUIESCENT CURRENT vs. TEMPERATURE REF01/0 TOC08 PERCENT CHANGE OUTPUT VOLTAGE (%) = 1V T A = T A = + C +7 C OUTPUT CHANGE DUE TO THERMAL SHOCK DEVICE IMMERSED IN +7 C OIL BATH REF01/0 TOC TIME (s) 7

8 +V, +10V Precision 9V 9V 1.1mA REF kΩ V - +1V REF01 Typical Applications +10V 10kΩ 10kΩ +1V kω OP-07-10V -1V Figure. Precision Calibration Standard Figure 3. ±10V Reference +1V 3 REF0 +1V I OUT R I OUT =.0V R + 1mA REF0 TEMP 1.kΩ ±% *UP TO 10 FEET OF SHIELDED -CONDUCTOR CABLE. * V REF 9.09kΩ 0kΩ 1.kΩ.11kΩ 7 OP-07 UT 3 (10mV/ C) 00kΩ -1V Figure. Current Source Figure. Precision Temperature Transducer with Remote Sensor 8

9 +V, +10V Precision TOP VIEW /TEMP* 1 3 REF01/ REF0 8 7 UT /TEMP* GDN 1 3 Pin Configurations REF01/ REF0 8 7 UT DIP SO *NOTE: PIN 3 IS (NO CONNECTION) ON REF01, TEMP OUTPUT ON REF0. PART TEMP RANGE MAX TEMPCO (ppm/ C) Ordering Information (continued) INITIAL ERROR (mv) PIN-PACKAGE REF0EP 0 C to +70 C 8. ±1 8 Plastic DIP P8- REF0EP+ 0 C to +70 C 8. ±1 8 Plastic DIP P8- REF0HP 0 C to +70 C ± 8 Plastic DIP P8- REF0HP+ 0 C to +70 C ± 8 Plastic DIP P8- REF0HSA 0 C to +70 C ± 8 SO S8- REF0HSA+ 0 C to +70 C ± 8 SO S8- REF0CP 0 C to +70 C ±0 8 Plastic DIP P8- REF0CP+ 0 C to +70 C ±0 8 Plastic DIP P8- REF0CSA 0 C to +70 C ±0 8 SO S8- REF0CSA+ 0 C to +70 C ±0 8 SO S8- REF0CESA -0 C to +8 C ±0 8 SO S8- PKG CODE REF0CESA+ -0 C to +8 C ±0 8 SO S8- +Denotes a lead-free package. Revision History Pages changed at Rev 7: 1, 9 Package Information For the latest package outline information, go to Maxim cannot assume responsibility for use of any circuitry other than circuitry entirely embodied in a Maxim product. No circuit patent licenses are implied. Maxim reserves the right to change the circuitry and specifications without notice at any time. Maxim Integrated Products, 10 San Gabriel Drive, Sunnyvale, CA Maxim Integrated Products is a registered trademark of Maxim Integrated Products, Inc.

MAX TEMPCO. INITIAL ERROR (ppm/ C) Plastic DIP 8 CERDIP 8 Plastic DIP 0 C to +70 C Plastic DIP 8 SO REF01CZ 0 C to +70 C 65 ±100

MAX TEMPCO. INITIAL ERROR (ppm/ C) Plastic DIP 8 CERDIP 8 Plastic DIP 0 C to +70 C Plastic DIP 8 SO REF01CZ 0 C to +70 C 65 ±100 19-0887; Rev 1; 8/99 General Description The REF01 and REF02 are precision voltage references that are pretrimmed to within ±3% of +10V and +5V, respectively. Both references feature excellent temperature