TeSys contactors From 115 to 2750 A

Transcription

1 Selection guide TeSys contactors From to 0 A Applications Control of all types of motor for standard or severe duty applications Control of resistive, inductive and capacitive circuits: heating, lighting, cos j rectification, transformers, normal-standby Rated operational current le max. AC- (Ue y 0 V) Ie max. AC- (q y 0 C) A 0 A A A A 0 A 00 A 00 A 00 A 0 A A A 0 A 00 A 00 A 00 A Rated operational voltage 000 V 000 V 000 V 000 V 000 V 000 V 000 V 000 V Number of poles or or or or or or, or, or Rated operational power in category AC- 0/0 V 0 kw 0 kw kw kw kw 00 kw 0 kw kw 0/00 V kw kw 0 kw 0 kw kw 0 kw 00 kw 0 kw V kw 0 kw 00 kw 0 kw 0 kw 0 kw 0 kw 0 kw 0 V kw 0 kw 00 kw 0 kw 0 kw 00 kw 0 kw kw 00 V kw 0 kw 0 kw kw 0 kw 00 kw kw kw 0/0 V 0 kw 00 kw 0 kw kw 0 kw 0 kw 0 kw kw Add-on auxiliary contact blocks 000 V kw kw 00 kw 00 kw kw 0 kw kw kw Front mounting, identical to those used on LC D contactors (contacts: instantaneous LA DNpp, time delay LA DT or LA DR, dust and damp protected LA DX or DY or DZ) Associated thermal overload relays and controllers Manual-auto Electronic LR F TeSys T Interfaces Specific LA FWB Universal With or without, depending on the control circuit Contactor type LC F LC F0 LC F LC F LC F LC F0 LC F00 LC F00 Reversing contactor type LC F LC F0 LC F LC F LC F For customer assembly Pages Contactors / and / / and / Reversing contactors / and / / to / 0 /0

2 0 A 0 A 00 A 0 A 000 A 00 A 00 A 000 A 00 A 000 A 0 A 00 A 00 A 00 A 00 A 0 A 000 A 0 A 000 V 000 V 000 V 000 V 000 V 000 V 000 V 000 V 000 V 000 V 000 V, or or to to to to 00 KW 0 kw 0 kw 0 kw 0 kw kw 00 kw kw 00 kw 0 kw 00 kw 00 kw 0 kw 00 kw kw kw 0 kw kw 0 kw 00 kw 00 kw 00 kw kw 0 kw 0 kw 0 kw 00 kw 00 kw 00 kw 0 kw 0 kw 00 kw 00 kw 00 kw 00 kw 0 kw kw kw 0 kw 0 kw 0 kw 00 kw 0 kw 0 kw 0 kw 0 kw 0 kw 0 kw 0 kw Front mounting, identical to those used on LC D contactors (contacts: instantaneous LA DNpp, time delay LA DT or LA DR, dust and damp protected LA DX or DY or DZ) LR F LR F TeSys T TeSys T instantaneous contact compositions: N/C + N/O, N/O + N/C, N/O + N/C or N/O LA FWB With or without, depending on the control circuit LC F0 LC F0 LC F00 LC F0 LC F00 LC F00 LC F00 LC BL LC BM LC BP LC BR For customer assembly / and / / and / / to / / 0 /0

3 Characteristics TeSys contactors TeSys F contactors ( to 00 A) Control circuit: a.c. or d.c. Environment Contactor type LC F LC F0 LC F Rated insulation voltage (Ui) Conforming to IEC 0-- V Rated impulse withstand voltage (Uimp) Conforming to VDE 00 gr C V Coil not connected to the power circuit kv Conforming to standards EN 0-, EN 0--, IEC 0-, IEC 0--, JEM 0 Product certifications CSA, UL, BV, GL, DNV, RINA, RMROS, LROS, CCC Degree of protection Conforming to IEC 0 IP X front face with shrouds LA F Conforming to VDE 00 Front face protected against direct finger contact with shrouds LA F Protective treatment Standard version TH Ambient air temperature around the device Storage C Operation C - + Permissible at Uc () C Maximum operating altitude Without derating m 000 Operating positions Without derating (not to be used for LC F0, F00 and F00) With derating Not to be used Apply the following derating coefficients: 0. on the pull-in voltage, 0. on the drop-out voltage and 0. on the operational current in AC- Apply the following derating coefficients:. on the pull-in voltage,. on the drop-out voltage and 0. on the operational current in AC- In either case: neither the making and breaking capacities nor the electrical and mechanical durabilities can be assured. Shock resistance () / sine wave ms Vibration resistance () 00 Hz Contactor open gn gn gn Contactor closed gn gn gn Contactor open gn gn gn Contactor closed gn gn gn () In these conditions, it is recommended that LX F coils be used for contactor sizes F to F. () In the least favourable direction, without change of contact state (coil at Uc). Where higher resistance to mechanical shock is required, select shock-proof contactors. Please consult your Regional Sales Office. 0 Selection : pages / to / References : pages / and / Dimensions : pages /0 to / Schemes : page / /0

4 LC F LC F LC F0 LC F00 LC F00 LC F0 LC F0 LC F00 LC F0 LC F00 LC F00 LC F EN 0-, EN 0--, IEC 0-, IEC 0--, JEM 0 CSA, UL, BV, GL, DNV, RINA, RMROS, LROS, CCC UL, CSA, CSA, CCC, ETL-UL GL, LROS IP 0 front face with shrouds LA F Front face protected against direct finger contact with shrouds LA F TH (not to be used for LC F0, F00, F00 and F00) Not to be used Apply the following derating coefficients: 0. on the pull-in voltage, 0. on the drop-out voltage and 0. on the operational current in AC-. Apply the following derating coefficients:. on the pull-in voltage,. on the drop-out voltage and 0. on the operational current in AC-. In either case: neither the making and breaking capacities nor the electrical and mechanical durabilities can be assured gn gn gn gn gn gn gn gn gn gn gn gn gn gn gn gn gn gn gn gn gn gn gn gn gn gn gn. gn gn gn. gn gn gn gn gn gn gn gn gn gn gn gn. gn gn gn gn gn gn 0 /0

5 Characteristics (continued) TeSys contactors TeSys F contactors ( to 00 A) Control circuit: a.c. or d.c. Pole characteristics Contactor type LC F LC F0 LC F LC F LC F Number of poles or or or or or Rated operational current (le)(ue y 0 V) In AC-, q y C A 0 In AC-, q y 0 C A Rated operational voltage Up to V (Ue) Frequency limits Of the operational current () Hz / 00 / 00 / 00 / 00 / 00 Conventional thermal current q y 0 C A Rated making capacity Rated breaking capacity Maximum permissible current No current flowing for previous 0 minutes, at q y 0 C Short-circuit protection by fuses U y 0 V I rms conforming to IEC 0-- A Making current: 0 x I in AC- or x I in AC- I rms conforming to A Making and breaking current: x I in AC- or 0 x I in AC- IEC 0-- For 0 s A For 0 s A For min A For min A For 0 min A Motor circuit (type am) A With thermal overload relay A (type gg) gg fuses A Average impedance per pole At lth and 0 Hz mw Power dissipation per pole for the above operational currents Connection AC- W AC- W Maximum c.s.a. Bar Number of bars Bar mm 0 x x x x x Cable with lug mm Cable with connector mm Bolt diameter mm Ø Ø Ø 0 0 Tightening torque Power circuit connections N.m 0 () Sine wave without interference. Above these values, please consult your Regional Sales Office. () With set of right-angled connectors LA F00 (see page /). () Paralleling of poles must be carried out only in accordance with the fuse manufacturer's recommendations. 0 Selection : pages / to / References : pages / and / Dimensions : pages /0 to / Schemes : page / /0

6 LC F0 LC F00 LC F00 LC F0 LC F0 LC F00 LC F0 LC F00 LC F00 LC F00 or, or, or, or or () / 00 / 00 / 00 / 00 / 00 / 00 / 00 / 00 / 00 / () Making current: 0 x I in AC- or x I in AC- Making current:. x I in AC- Making and breaking current: x I in AC- or 0 x I in AC- Making and breaking current:. x I in AC x 00 () x 00 x 00 () x 000 () x 0 x 0 x 0 x 0 x 00 x 0 x 00 x 00 x 00 x 00 x 0 x 0 x x x x (. with set of right-angled (. with set connectors LA F00) of right-angled connectors LA F0) ( with set of right-angled connectors LA F0) ( with set of right-angled connectors LA F00) 0 /0

7 Characteristics TeSys contactors TeSys F contactors ( to 00 A) Control circuit: a.c. Control circuit characteristics with LX or LX coil Contactor type LC F LC F0 LC F LC F LC F Rated control circuit voltage (Uc) 0 or 0 Hz V 000 Control voltage limits (q y C) 0 or 0 Hz coils Operation 0.. Uc Drop-out Uc 0 00 Hz coils Operation 0.. Uc Drop-out Uc Average consumption at 0 C and at Uc a 0 Hz Inrush 0 Hz coil VA Hz coil VA 0 Cos j Sealed 0 Hz coil VA 0 00 Hz coil VA 0 Cos j a 0 Hz Inrush 0 Hz coil VA Hz coil VA 0 Cos j Sealed 0 Hz coil VA 0 00 Hz coil VA 0 Cos j Heat dissipation W Operating time () Closing "C" ms Opening "O" ms 00 0 Mechanical durability at Uc In millions of operating cycles Maximum operating rate at ambient temperature y C Connection Flexible cable without cable end Flexible cable with cable end In operating cycles per hour Min/max c.s.a. or conductors mm / / / / / conductor mm / / / / / conductors mm /. /. /. /. /. Solid cable or conductors mm / / / / / without cable end Tightening torque N.m..... Mechanical latching Mechanical latch blocks LA DK must not be fitted on LC F contactors. For similar type of operation, use magnetic latching contactors CR F. See pages /0 to /. () The closing time "C" is measured from the moment the coil supply is switched on to initial contact of the main poles. The opening time "O" is measured from the moment the coil supply is switched off to the moment the main poles separate. () Control circuit characteristics with LX coil. 0 Selection : pages / to / References : pages / and / Dimensions : pages /0 to / Schemes : page / /0

8 LC F0 LC F00 LC F00 LC F0 LC F0 LC F00 LC F0 LC F00 LC F00 LC F () 0 00 () 0 00 () 0.. Uc 0.. Uc 0.. Uc 0.. Uc 0.. Uc 0.. Uc 0.. Uc 0.. Uc 0.. Uc Uc Uc Uc Uc Uc Uc Uc Uc Uc x 0 x x x Min/max c.s.a. / / / / / / / / / / / / / / / / / / / / /. /. /. /. /. /. /. /. /. /. / / / / / / / / / / Mechanical latch blocks LA DK must not be fitted on LC F contactors. For similar type of operation, use magnetic latching contactors CR F. See pages /0 to /. 0 /

9 Characteristics TeSys contactors TeSys F contactors ( to 00 A) Control circuit: d.c. Control circuit characteristics with LX coil Contactor type LC F LC F0 LC F LC F LC F Rated control circuit voltage c V (Uc) Control voltage limits Operation 0.. Uc 0.. Uc 0.. Uc 0.. Uc 0.. Uc (q y C) Drop-out Uc Uc Uc Uc Uc Average consumption at 0 C and at Uc Average operating time at Uc () c Inrush W Sealed W.. Closing "C" ms Opening "O" ms Note: The arcing time depends on the circuit switched by the poles. For all normal -phase applications, the arcing time is less than 0 ms. The load is isolated from the supply after a time equal to the sum of the opening time and the arcing time. Mechanical durability at Uc In millions of operating cycles Maximum operating rate at ambient temperature y C Cabling Flexible cable without cable end In operating cycles per hour Min/max c.s.a. conductor mm / / / / / conductors mm / / / / / Flexible cable conductor mm / / / / / with cable end conductors mm /. /. /. /. /. Solid cable without cable end conductor mm / / / / / conductors mm / / / / / Tightening torque N.m..... Mechanical latching Mechanical latch blocks LA DK must not be fitted on LC F contactors. For similar type of operation, use magnetic latching contactors CR F. See pages /0 to /. () The operating times depend on the type of contactor electromagnet and its control mode. The closing time "C" is measured from the moment the coil supply is switched on to initial contact of the main poles. The opening time "O" is measured from the moment the coil supply is switched off to the moment the main poles separate. 0 Selection : pages / to / References : pages / and / Dimensions : pages /0 to / Schemes : page / /

10 LC F0 LC F00 LC F00 LC F0 LC F0 LC F00 LC F0 LC F00 LC F00 LC F Uc 0.. Uc 0.. Uc 0.. Uc 0.. Uc 0.. Uc 0.. Uc 0.. Uc 0.. Uc 0.. Uc Uc Uc Uc Uc Uc Uc Uc Uc Uc Uc x x Note: The arcing time depends on the circuit switched by the poles. For all normal -phase applications. the arcing time is less than 0 ms. The load is isolated from the supply after a time equal to the sum of the opening time and the arcing time Min/max c.s.a. / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / /. /. /. /. /. /. /. /. /. /. / / / / / / / / / / / / / / / / / / / / Mechanical latch blocks LA DK must not be fitted on LC F contactors. For similar type of operation, use magnetic latching contactors CR F. See pages /0 to /. 0 /

11 References TeSys contactors TeSys F contactors for motor control in utilisation category AC- ( to 00 A) Control circuit: a.c. or d.c. 00 LC F -pole contactors Standard power ratings of -phase motors 0-0 Hz in category AC- Rated operational current in AC- 0 V 0 V 0 V 0 V 0 V 00 V V 0 V 00 V 0 V 000 V up to Basic reference, to be completed by adding the voltage code () Screw fixing, cabling () Weight kw kw kw kw kw kw kw A kg 0 0 LC Fpp LC F0pp LC Fpp LC Fpp LC Fpp LC F0pp LC F00pp LC F00pp LC F0pp.00 LC F LC F0pp LC F00pp.0 Note: auxiliary contact blocks, modules and accessories: see pages / to /. () Power terminals can be protected against direct finger contact by the addition of shrouds, to be ordered separately, except on contactors LC F0 (see page /). () Standard control circuit voltages (for other voltages, please consult your Regional Sales Office). Volts a LC F F 0 Hz (coil LX) B E F FE M P U Q V N 0 Hz (coil LX) E F G L M U Q R 0 00 Hz (coil LX) E F FE G L M P U Q V N R LC F F Hz (coil LX) B E F FE G L M P U Q V N R LC F00 F Hz (coil LX) E F FE G () L M P U Q V N R LC F Hz (coil LX) F FE F L M P U Q V N R LC F Hz (coil LX) () FW FW FW MW MW MW QW QW QW Volts c LC F F0 (coil LX F) BD ED FD GD MD MD UD RD LC F00 F0 (coil LX F) ED FD GD MD UD RD LC F0 (coil LX F) FD GD MD UD RD LC F00 (coil LX F) FW FW MW MW QW () F for LC F0. () Coil LX Fpp + rectifier DRTEpp. 0 Selection : pages / to / References : pages /0 and / Dimensions : pages /0 to / Schemes : page / /

12 References (continued) TeSys contactors TeSys F contactors for control in category AC-, (00 to 00 A ) Control circuit: a.c. or d.c. 0, or -pole contactors Maximum current in AC- (θ y 0 C) Number of poles Basic reference, to be completed by adding the voltage code () Screw fixing, cabling () Weight A kg 00 LC Fpp.0 LC F LC Fpp.0 0 LC F0pp.0 LC F0pp.0 0 LC Fpp.0 LC Fpp.0 LC Fpp.0 LC Fpp.0 0 LC F00 0 LC Fpp.0 LC Fpp.0 00 LC F0pp.00 LC F0pp LC F00pp.000 LC F00pp.00 LC F00pp 0.00 LC F0 00 LC F00pp.0 LC F00pp.0 LC F00pp LC F0pp.00 LC F0pp.00 LC F0pp.00 0 LC F0pp LC F00pp.000 LC F00 00 LC F0pp.00 LC F0pp LC F00pp () LC F00pp.000 LC F00 Note: auxiliary contact blocks, modules and accessories: see pages / to /. () Power terminals can be protected against direct finger contact by the addition of shrouds, to be ordered separately (except LC F0, LC F0, LC F00, LC F00 and LC F00), see page /. () Standard control circuit voltages, see previous page. () With set of right-angled connectors LA F00 (see page /). 0 Selection : pages / to / References : pages / and / Dimensions : pages /0 to / Schemes : page / /

13 References TeSys contactors TeSys F reversing contactors for motor control in utilisation category AC- ( to A), pre-assembled Control circuit: a.c. or d.c. DB0 LC F -pole reversing contactors (horizontally mounted) () Pre-wired power connections Standard power ratings of -phase motors 0/0 Hz in category AC- Operational current in AC- 0 V 0 V 0 V 0 V 0 V 00 V V 0 V 00 V 0 V 000 V up to Maximum operational voltage Contactors supplied without coil () Complete reference Fixing, cabling () Weight kw kw kw kw kw kw kw A V kg LC F LC F LC F LC F LC F.0 Accessories (to be ordered separately) Description For reversing contactors Quantity required Power terminal protection shrouds Reference Weight kg LC F LA F0 0.0 LC F0, F LA F0 0.0 LC F, F LA F0 0.0 Auxiliary contact blocks and add-on modules See pages / to / () Fitted with a mechanical interlock without electrical interlocking. Order separately auxiliary contact blocks LAD Np to obtain electrical interlocking between the contactors, see page / For accessories, see pages / to /. () Coils to be ordered separately: - a.c. supply, see pages /0 and /, - d.c. supply, see page /. () Screw fixing. Power terminals can be protected against direct finger contact by the addition of shrouds, to be ordered separately, see above. 0 Selection : pages / to / / Dimensions: pages / to /0 Schemes: page /

14 References (continued) TeSys contactors TeSys F changeover contactor pairs for control in utilisation category AC- (00 to 0 A), pre-assembled Control circuit: a.c. or d.c. 0 LC F -pole changeover contactor pairs (horizontally mounted) () Pre-wired power connections Utilisation category AC- Maximum Contactors Weight Non inductive loads Maximum operational current q < 0 C operational voltage supplied without coil () Complete reference Fixing, cabling () A V kg LC F LC F LC F LC F LC F.0 Accessories (to be ordered separately) Description For changeover pairs Quantity required Power terminal protection shrouds Reference Weight kg LC F LA F0 0.0 LC F0, F LA F0 0.0 LC F, F LA F0 0.0 Auxiliary contact blocks and add-on modules See pages / to / () Fitted with a mechanical interlock without electrical interlocking. Order separately auxiliary contact blocks LAD Np to obtain electrical interlocking between the contactors, see page / For accessories, see pages / to /. () Coils to be ordered separately: - a.c. supply, see pages /0 and /, - d.c. supply, see page /. () Screw fixing. Power terminals can be protected against direct finger contact by the addition of shrouds, to be ordered separately, see above. 0 Selection : pages / to / Dimensions: pages / to /0 Schemes: page / /

15 Combinations TeSys contactors TeSys F reversing contactors and changeover contactor pairs Components for assembling -pole reversing contactors and changeover contactor pairs, for customer assembly Horizontally mounted Mechanical interlocks Sets of power connections Reversers assembled using contactors of identical rating, Reversing contactors -pole changeover contactor pairs () type : LA Fp0 () LA Fppp () LA Fppp () LC F LC F0 LC F LC F LC F LC F0 LC F00 LC F00 LC F0 LC F00 A A L L L U V W A A A A /L /L /L L /L L /L L /L A A Vertically mounted Reversers assembled using contactors of identical rating, type : LC F LC F0 LC F LC F LC F LC F0 LC F00 LC F00 LC F0 LC F00 Reversers assembled using contactors of different ratings, see page /0 Mechanical interlocks LA FFF LA FGG LA FHH LA FJJ LA FKK LA FLL LC F0 LA FX0 () For -pole changeover contactor pairs, see pages /0 and /. () Complete references: see page /. 0 /

16 References TeSys contactors TeSys F reversing contactors and changeover pairs Components for assembling -pole reversing contactors and changeover contactor pairs, for customer assembly Control circuit: a.c. or d.c. Reversers assembled using contactors of identical rating Contactor type Set of power connections Mechanical interlock () Reference Weight kg Kit reference Weight kg For assembly of -pole reversing contactors for motor control Horizontally mounted LC F LA FF 0.00 LA FF LC F0 LA F LA FF LC F LA FG 0.0 LA FG LC F LA F.00 LA FG LC F LA FH.00 LA FJ0 0.0 LC F0 LA FJ.00 LA FJ0 0.0 LC F00 LA FJ.00 LA FJ0 0.0 LC F00 LA FK.0 LA FJ0 0.0 LC F0 or F00 LA FL.00 LA FL0 0.0 Vertically mounted LC F or F0 () LA FFF 0. LC F () LA FGG 0.0 LC F () LA FGG 0.0 LC F or F0 () LA FHH.00 LC F00 () LA FJJ.00 LC F00 () LA FKK.00 LC F0 or F00 () LA FLL.0 LC F0 () LA FX0 ().00 For assembly of -pole changeover contactor pairs () Horizontally mounted LC F LA FF 0.0 LA FF LC F0 LA F0 0.0 LA FF LC F LA FG 0.0 LA FG LC F LA F.00 LA FG LC F LA FH.00 LA FJ0 0.0 LC F0 LA FJ.00 LA FJ0 0.0 LC F00 LA FJ.00 LA FJ0 0.0 LC F00 LA FK.00 LA FJ0 0.0 LC F0 or F00 LA FL.00 LA FL0 0.0 Vertically mounted LC F or F0 () LA FFF 0. LC F () LA FGG 0.0 LC F () LA FGG 0.0 LC F or F0 () LA FHH.00 LC F00 () LA FJJ.00 LC F00 () LA FKK.00 LC F0 or F00 () LA FLL.0 LC F0 () LA FX0 ().00 () To order the contactors: see pages / and /. For the auxiliary contact blocks LAD Np required to obtain electrical interlocking between the contactors, see page / For accessories, see pages / to /. () With the exception of contactors LC F0, all power connections are to be made by the customer. () Double mechanical interlock mechanism with interlock connecting rods and power connecting links. () For assembly of -pole changeover contactor pairs, see pages /0 and /. 0 Selection : pages / to / Dimensions: pages / to /0 Schemes: page / /

17 Combinations TeSys contactors TeSys F changeover contactor pairs Components for assembling and -pole changeover contactor pairs, for customer assembly Horizontally mounted Mechanical interlocks Sets of power connections Contactor pairs assembled using -pole changeover contactor pairs () contactors of identical rating, type : LC F LC F0 LC F LC F LC F LC F0 LC F00 LC F00 LC F0 LA Fp0 LA Fppp A A N /L /L /L /L L /L L /L L N N A A Vertically mounted Contactor pairs assembled using contactors of identical rating, type : LC F LC F0 LC F LC F LC F LC F0 LC F00 LC F00 LC F0 Mechanical interlocks Assembly A Assembly B Assembly C LA FFF LA FHH LA FX LA FGG LA FJJ LA FKK LA FLL Contactor pairs assembled using contactors of different ratings, type : LC F or F LC F0 or F0 LC F or F LC F or F LC F or F LC F0 or F0 LC F00 or F00 LC F00 or F00 LC F0 or F0 LC F00 Assembly A Assembly B Assembly C LA FGF LA FHF, LA FHG LA FJF, LA FJG LA FKF, LA FKG LA FLF, LA FLG LA FJH LA FKH, LA FKJ LA FLH, LA FLJ and LA FLK Contactor pairs assembled using contactors of identical or different ratings, type : LC F or F LC F0 or F0 LC F or F LC F or F LC F or F LC F0 or F0 LC F00 or F00 LC F00 or F00 LC F0 or F0 LC F00 LA Fppp : see pages / and /. 0 () For -pole changeover contactor pairs, see pages / and /. Important: the contactor ratings must be in decreasing size from top to bottom. /0

18 References TeSys contactors TeSys F changeover contactor pairs Components for assembling and -pole changeover contactor pairs, for customer assembly Control circuit: a.c. or d.c. Contactor pairs assembled using contactors of identical rating For assembly of -pole changeover contactor pairs () Contactor type () Set of power connections Reference Weight kg Mechanical interlock Kit reference Weight kg Horizontally mounted LC F LA FF 0.0 LA FF LC F0 LA F0 0.0 LA FF LC F LA FG 0.0 LA FG LC F LA F.00 LA FG LC F LA FH.00 LA FJ0 0.0 LC F0 LA FJ.00 LA FJ0 0.0 LC F00 LA FJ.00 LA FJ0 0.0 LC F00 LA FK.00 LA FJ0 0.0 LC F0 LA FL.00 LA FL0 0.0 Vertically mounted LC F or F0 () LA FFF 0. LC F () LA FGG 0.0 LC F () LA FGG 0.0 LC F or F0 () LA FHH.00 LC F00 () LA FJJ.00 LC F00 () LA FKK.00 LC F0 () LA FLL.0 LC F0 () LA FX ().00 Contactor pairs assembled using contactors of different ratings For assembly of or -pole changeover contactor pairs Contactor type() Mechanical interlock At bottom At top Kit reference Weight kg Vertically mounted LC F or F or LC F0 or F0 LC F or F or LC F or F LC F or F or LC F0 or F0 LC F or F LA FGF 0.0 LC F or F LA FGF 0.0 LC F or F LA FHF 0.0 LC F0 or F0 LA FHF 0.0 LC F00 or F00 LA FJF 0.0 LC F00 or F00 LA FKF 0.0 LC F0, F0 or F00 LA FLF 0.0 LC F or F LA FHG 0.0 LC F0 or F0 LA FHG 0.0 LC F00 or F00 LA FJG 0.0 LC F00 or F00 LA FKG 0.0 LC F0, F0 or F00 LA FLG 0.0 LC F00 or F00 LA FJH.0 LC F00 or F00 LA FKH.0 LC F0, F0 or F00 LA FLH.0 LC F00 or F00 LC F00 or F00 LA FKJ.00 LC F0 or F0 or F00 LA FLJ.0 LC F00 or F00 LC F0 or F0 or F00 LA FLK.0 For assembly of reversers using contactors, vertically mounted See pages / and /. () For assembly of -pole changeover contactor pairs, see pages / and /0. () To order the contactors: see pages / and /. For the auxiliary contact blocks LAD Np required to obtain electrical interlocking between the contactors, see page /. For accessories, see pages / to /. () All power connections are to be made by the customer. () Double mechanical interlock mechanism with interlock connecting rods and power connecting links. 0 Selection : pages / to / Dimensions: pages / to /0 Schemes: page / /

19 LAD N LAD N, LAD C LAD N0, N0 LC F LAD T, LAD S LAD R LA DX, DY, DZ 0 /

20 References TeSys contactors TeSys F contactors Auxiliary contact blocks Instantaneous auxiliary contact blocks For use in normal operating environments Number of contacts Maximum number of blocks per contactor Clip-on mounting Composition Reference Weight kg LAD N LAD N LAD N 0.00 LAD N LAD N LAD N 0.00 LAD N 0.00 LAD N LAD N LAD N 0.00 () LAD C 0.00 With terminal referencing conforming to EN 00 LAD NP 0.00 LAD NG 0.00 LAD NP 0.00 LAD NG 0.00 Instantaneous auxiliary contact blocks for connection by lugs This type of connection is not possible for blocks with contact or blocks with dust and damp protected contacts. For all other instantaneous auxiliary contact blocks, add the figure to the end of the references selected above. Example: LAD N becomes LAD N. Instantaneous auxiliary contact blocks with dust and damp protected contacts Recommended for use in particularly harsh industrial environments Number of contacts Maximum number of blocks per contactor Clip-on mounting Composition Reference Weight kg LA DX () LA DY LA DZ LA DZ 0.00 Time delay auxiliary contact blocks Number of contacts N/O + N/C Maximum number of blocks per contactor Time delay Reference Weight Clip-on mounting Type Range s kg On-delay 0. () LAD T LAD T LAD T () LAD S 0.00 Off-delay 0. () LAD R LAD R LAD R 0.00 () Including N/O + N/C make before break () Device fitted with earth screen continuity terminals. () With extended scale from 0. to 0. s. () With switching time of 0 ms ± ms between opening of the N/C contact and closing of the N/O contact. 0 Presentation : page / Schemes : page / /

21 References TeSys contactors TeSys F contactors Suppressor blocks 0 LA D0 LA Fppp Suppressor blocks RC circuits (resistor-capacitor) b Effective protection for circuits highly sensitive to "high frequency" interference. For use only in cases where the voltage is virtually sinusoidal, i.e. less than % total harmonic distortion. b Voltage limited to Uc max. and oscillating frequency limited to 00 Hz max. b Slight increase in drop-out time (. to. times the normal time). Mounting Uc Reference Weight kg Clip-on mounting on all ratings and all a.c. coils. a V LA FRCE V LA FRCF V LA FRCP 0.00 V LA FRCV 0.00 Suppressor block bracket LA D Varistors (peak limiting) b Protection provided by limiting the transient voltage to Uc max. b Maximum reduction of transient voltage peaks. Clip-on mounting on all ratings and all coils. a or c V LA FVE V LA FVF V LA FVP 0.00 V LA FVV LA Fp0 LA Fp0 Diodes b No overvoltage or oscillating frequencies. b Increase in drop-out time ( to times the normal time). b Polarised component. Clip-on mounting on all ratings and all d.c. coils. c V LA FDE V LA FDF V LA FDP V LA FDV 0.00 Bidirectional peak limiting diodes (transil) b Protection provided by limiting the transient voltage to between and. times Uc max. b Maximum reduction of transient voltage peaks. Clip-on mounting on all ratings and all coils. a or c V LA FTE V LA FTF V LA FTP 0.00 V LA FTV 0.00 Connection accessories For use on -pole contactors Set of links Weight Set reference kg Links for parallel connection of poles (in pairs) LC F LA FF LC F0, F LA FG0 0.0 LC F, F, F0, F00 LA FH0.000 LC F00 LA FK0.0 LC F0 LA FL Links for star connection of poles LC F LA FF0 0.0 LC F0, F LA FG LC F, F, F0, F00 LA FH0 0.0 LC F00 LA FK0 0.0 LC F0, F00 LA FL0 0.0 DZ FA Control circuit voltage take-off from power terminals For use with contactors Mounted on bolt size Sold in lots of Unit reference Weight kg LC F M 0 DZ FA 0.00 LC F0, F M 0 DZ GA 0.00 LC F F00 M0 0 DZ HA 0.00 LC F0, F00 M 0 DZ JA Dimensions : pages / and / /

22 References (continued) TeSys contactors TeSys Fcontactors Accessories 0 Right-angled connectors For contactors or thermal overload relays For use with With connector plates Set of connectors Contactors Thermal overload Set reference Weight relays () Width Type kg LC F LR Fp, LR F mm Rear LA FF LA Fp LA Fp LC F0, F LC F, F, F0, F00 LC F00 LC F0, F00 LR Fp, Fp, LR F, F Side LA FF 0.0 Large LA FF0 0.0 surface area 0 mm Rear LA FG 0.00 Side LA FG 0.0 Large LA FG surface area LR Fp,LR F mm Rear LA FJ 0.0 LR Fp, Fp, LR F, F Side LA FJ 0.0 Large LA FJ0 0.0 surface area 0 mm Rear LA FK 0.0 Side LA FK 0.0 Large LA FK surface area LR Fp,LR F 0 mm Rear LA FL.0 Side LA FL.0 DB0 DF LA FL0 LA F0 Large surface area LA FL0.0 For use with With connector Set of connectors Contactors plates Set reference Weight Width Type kg LC F0 0 mm Rear LA F0.0 LC F00, F00, F00 0 mm Rear LA F00.0 Connection accessories For reversing contactors or "star-delta" contactors combined with a thermal overload relay For use with Contactors LC F LC F0 and F LC F LC F and F LC F0 and F00 Thermal overload relays () LR Fp, Fp LR Fp, Fp LR F, F Width of connector plates Set of busbars Set reference Weight kg mm LA F0 0.0 LR Fp, Fp 0 mm LA F0 0.0 LR Fp, LR F LR Fp, LR F LR Fp, Fp LR F, F LR Fp, Fp LR F, F mm LA F0 0.0 mm LA F0 0.0 mm LA F0 0.0 mm LA F0 0.0 LC F00 LR Fp,LR F mm LA F0 0.0 LC F00 LR Fp, Fp LR Fp LR F, F, F 0 mm LA F0 0.0 LC F0, F00 LR Fp, LR F 0 mm LA F LA F00 () For protection relays class 0, replace the p with a and for class 0, replace the p with a. 0 Dimensions : pages / and / /

23 References (continued) TeSys contactors TeSys F contactors Accessories 0 Insulated terminal blocks For use on Connection -pole contactors LC F, F0, F x 0 mm or x mm Tightening tool mm hexagonal socket key Set of blocks Weight Set reference kg LA F0 0.0 LA F0 Power terminal protection shrouds For use on, and -pole contactors Number of shrouds per set Set reference Weight kg LC F LA F0 0.0 LC F0, F LA F LC F, F, F0, F00 and F00 F00 and F00 LA F0 0.0 LC F0, F0 and F00 LA F0 0.0 LC F LA F LA F0 LC F0 and F LA F LC F, F, F0, F00, F00 LA F LC F0 LA F /

24 References TeSys contactors TeSys F contactors Spare parts 0 LA FG LA F000 LA F000 Sets of contacts Per pole: fixed contacts, moving contact, deflectors, back-plate, clamping screws and washers. For contactor Type Replacement for Reference Weight kg -pole LC F00 poles LA F000.0 LC F00 poles LA F000.0 LC F0 poles LA F00.00 LC F0S0 poles LA F00S0.00 -pole LC F. F0 poles LA FF 0.0 LC F. F poles LA FG 0.0 LC F poles LA FH 0.0 LC F0. F00 poles LA F LC F00 poles LA F000.0 LC F0 poles LA F00.00 LC F0 pole LA F00 ().00 poles LA F00.00 LC F00 poles LA F LC F0S0 poles LA F00S0.00 -pole LC F0. F poles LA FF 0.0 LC F. F poles LA FG 0. LC F poles LA FH 0.0 LC F0. F00 poles LA F LC F00 poles LA F LC F0 poles LA F00.0 LC F0 pole LA F00 ().00 poles LA F00.00 LC F0S0 poles LA F00S0.00 Arc chambers For contactor Type Replacement Reference for Weight kg -pole LC F00 poles LA F LC F00 poles LA F000.0 LC F0 poles LA F00.00 LC F0S0 poles LA F pole LC F poles LA F0 0.0 LC F0 poles LA F LC F poles LA F0 0.0 LC F poles LA F0 0.0 LC F poles LA F0 0.0 LC F0 poles LA F00.00 LC F00 poles LA F LC F00 poles LA F000.0 LC F0 poles LA F00.0 LC F0 pole LA F00 ().00 LC F00 poles LA F000.0 LC F0S0 poles LA F00.0 LC F0 poles LA F00.0 LC F00 poles LA F000 ().0 LC F00 poles LA F000 ().0 LC F00 poles LA F000 ().0 -pole LC F poles LA F0 0.0 LC F0 poles LA F LC F poles LA F0 0.0 LC F poles LA F0.000 LC F poles LA F0.0 LC F0 poles LA F00.0 LC F00 poles LA F000 ().0 LC F00 poles LA F000 ().00 LC F0 poles LA F00 ().00 LC F0 pole LA F00 ().00 LC F0S0 poles LA F00.00 () Comprising identical items per pole. () Comprising three -pole arc chambers. () Comprising two -pole arc chambers. () Comprising single-pole arc chambers. 0 /

25 References TeSys contactors TeSys F contactors Accessories for assembly of reversing contactors and changeover contactor pairs using contactors, vertically mounted - for customer assembly 0 LA Fppp Closing of one of the contactors prevents closing of the other. Mechanical interlock kits Contactor type () Mechanical interlock () Top Middle Bottom Kit reference () Weight kg LC F, F0, F or F0 LC F, F, F or F LC F, F0, F or F0 LC F00, F00 or F00 LC F00, F00 or F00 (continued on page /) LC F, F0, F or F0 LC F, F0, F or F0 LC F, F, F or F LC F, F0, F or F0 LC F, F, F or F LC F, F0, F or F0 LC F, F0, F or F0 LC F, F, F or F LC F, F0, F or F0 LC F00, F00 or F00 LC F, F0, F or F0 LC F, F, F or F LC F, F0, F or F0 LC F00, F00 or F00 LC F00, F00 or F00 LC F, F0, F or F0 LC F, F0, F or F0 LC F, F0, F or F0 LC F, F, F or F LC F, F0, F or F0 LC F, F0, F or F0 LC F, F, F or F LC F, F0, F or F0 LC F, F, F or F LC F, F0, F or F0 LC F, F0, F or F0 LC F, F0, F or F0 LC F, F, F or F LC F, F0, F or F0 LC F, F, F or F LC F, F0, F or F0 LC F, F0, F or F0 LC F, F, F or F LC F, F0, F or F0 LC-F00, F00 or F00 LC F, F0, F or F0 LC F, F0, F or F0 LC F, F, F or F LC F, F0, F or F0 LC F, F, F or F LC F, F0, F or F0 LC F, F0, F or F0 LC F, F, F or F0 LC F, F0, F or F0 LC F00, F00 or F00 LC F, F0, F or F0 LA FFFF 0. LA FGFF 0. LA FGGF 0. LA FGGG 0. LA FHFF.0 LA FHGF. LA FHGG. LA FHHF. LA FHHG. LA FHHH. LA FJFF. LA FJGF. LA FJGG. LA FJHF. LA FJHG. LA FJHH. LA FJJF. LA FJJG. LA FJJH. LA FJJJ.0 LA FKFF. LA FKGF. LA FKGG. LA FKHF. LA FKHG. LA FKHH. LA FKJF. LA FKJG. LA FKJH. LA FKJJ. LA FKKF. () To order the contactors, see pages / and /. For auxiliary contact blocks LAD N0 used for electrical locking, see page /. For accessories, see pages / to /. () Minimum distances between contactors, see page /. () The kit contains the lever arms, the x Ø mm rods and all parts required for assembly. Selection : pages / to / /

26 References (continued) TeSys contactors TeSys F contactors Accessories for assembly of reversing contactors and changeover contactor pairs using contactors, vertically mounted - for customer assembly LA Fppp Mechanical interlock kits (continued) Contactor type () Mechanical interlock () Top Middle Bottom Kit reference () Weight kg LC F00, F00 or F00 (continued) LC F0, F00, F0 or F0 LC F00, F00 or F00 LC F, F0, F or F0 LC F, F, F or F LC F, F0, F or F0 LC F00, F00 or F00 LC-F00, F00 or F00 LC F0, F00, F0 or F0 LC F, F, F or F LC F, F0, F or F0 LC F00, F00 or F00 LC-F00, F00 or F00 LC F, F0, F or F0 LC F, F0, F or F0 LC F, F, F or F LC F, F0, F or F0 LC F, F, F or F LC F, F0, F or F0 LC F, F0, F or F0 LC F, F, F or F LC F, F0, F or F0 LC F00, F00 or F00 LC F, F0, F or F0 LC F, F, F or F LC F, F0, F or F0 LC F00, F00 or F00 LC-F00, F00 or F00 LC F, F0, F or F0 LC F, F, F or F LC F, F0, F or F0 LC F00, F00 or F00 LC F00, F00 or F00 LC F0, F00, F0, or F0 LA FKKG. LA FKKH. LA FKKJ. LA FKKK. LA FLFF. LA FLGF. LA FLGG. LA FLHF.0 LA FLHG.0 LA FLHH. LA FLJF. LA FLJG. LA FLJH. LA FLJJ.0 LA FKKF. LA FKKG. LA FKKH. LA FKKJ. LA FKKK. LA FLLF.0 LA FLLG. LA FLLH.0 LA FLLJ. LA FLLK. LA FLLL.0 () To order the contactors, see pages / and /. For auxiliary contact blocks LAD N0 used for electrical locking, see page /. For accessories, see pages / to /. () Minimum distances between contactors. This is the distance, in mm, between the centres of two adjacent contactors (between the top and middle contactors or between the middle and bottom contactors). Contactor Bottom or top Middle LC F or F0 LC F or F LC F or F0 LC F00 LC F00 LC F0 or F00 LC F or F LC F or F LC F or F LC F LC F LC F0 or F () The kit contains the lever arms, the x Ø mm rods and all parts required for assembly. 0 Selection : pages / to / /

27 References TeSys contactors TeSys F contactors a.c. 0/0 Hz supply coils 0 LX FFppp LX FGppp References Maximum ambient air temperature: C. Above this, use an LX F coil, see page /. Operating cycles/hour (q y C): y 00. Control circuit voltage Uc - 0 Hz Uc - 0 Hz Average resistance at 0 C ± 0 % Inductance of closed circuit Voltage code Reference Weight V V W H kg For contactors LC F and LC F B LX FF D LX FF E LX FF E LX FF F LX FF G LX FF F LX FF FE LX FF0 0.0 /.. G LX FF /0.. L LX FF M LX FF U LX FF /.. M LX FF P LX FF U LX FF Q LX FF R LX FF /0. 0. Q LX FF V LX FF N LX FF S LX FF Y LX FF /0. Y LX FF LX FF LX FF Average consumption at 0 C: - inrush 0Hz: 0VA; 0Hz: 0 VA, sealed 0Hz: VA; 0 Hz: VA, cos j Heat dissipation: W. Operating time at Uc: closing ms, opening ms. For contactors LC F and LC F B LX FG LX FG E LX FG E LX FG F LX FG0 0.0 /0. 0. G LX FG F LX FG FE LX FG0 0.0 /. 0. G LX FG /0.. L LX FG M LX FG U LX FG /.. M LX FG P LX FG U LX FG Q LX FG R LX FG /0.. Q LX FG V LX FG N LX FG S LX FG Y LX FG /0. Y LX FG LX FG LX FG Average consumption at 0 C: - inrush 0 Hz: 0 VA; 0 Hz: 0 VA, sealed 0 Hz: VA; 0 Hz: VA, cos j Heat dissipation: W. Operating time at Uc: closing 0 ms, opening ms. /0

28 References TeSys contactors TeSys F contactors a.c. 0 to 00 Hz supply coils LX FHppp LX FJppp References Low sealed consumption. Operate on networks with harmonic numbers y. Operating cycles/hour (q y C): y 00. Control circuit voltage Uc Average resistance at 0 C ± 0 % Inrush Sealed Inductance of closed circuit Voltage code Reference Weight V W W H kg For contactors LC F and LC F () B LX FH () E LX FH () F LX FH () FE LX FH /. () G LX FH /0. () L LX FH () M LX FH () P LX FH () U LX FH0 0.0 () W LX FH () Q LX FH () V LX FH0 0.0 () N LX-FH () R LX FH /00 () S LX FH /0 0 () X LX FH () LX FH Average consumption at 0 C for 0 or 0 Hz and cos j 0.: - inrush: VA, - sealed: 0 VA. Heat dissipation: W. Operating time at Uc: closing 0 ms, opening 00 0 ms. For contactor LC F E LX FJ /0. 0. F LX FJ FE LX FJ /. 0. G LX FJ /0 0. L LX FJ M LX FJ P LX FJ U LX FJ0.000 / 00. W LX FJ Q LX FJ V LX FJ N LX FJ R LX FJ S LX FJ /00 0. X LX FJ LX FJ Average consumption at 0 C for 0 or 0 Hz and cos j 0.: - inrush: VA, - sealed: VA. Heat dissipation: W. Operating time at Uc: closing 0 ms, opening () Please consult your Regional Sales Office. 0 /

29 References (continued) TeSys contactors TeSys F contactors a.c. 0 to 00 Hz supply coils LX FKppp LX FLppp References (continued) Low sealed consumption. Operate on networks with harmonic numbers y. Control circuit voltage Uc Average resistance at 0 C ± 0 % Inrush Sealed Inductance of closed circuit Voltage code Reference Weight V W W H kg For contactor LC F E LX FK0.0 0/0. 0. F LX FK FE LX FK0.0 0/.. G LX FK.0 00/0. L LX FK M LX FK P LX FK U LX FK0.0 /. 0. W LX FK Q LX FK V LX FK N LX FK R LX FK S LX FK00.0 0/00 0. X LX FK LX FK000.0 Average consumption at 0 C for 0 or 0 Hz, cos j 0.: - inrush: 00 0 VA, - sealed: 0 VA. Operating cycles/hour (q y C): y 00. Heat dissipation: W. Operating time at Uc: closing 0 ms, opening 00 0 ms. For contactor LC F0 and LC F E LX FL0 ().00 0/0.. F LX FL FE LX FL G LX FL.00 00/ L LX FL M LX FL P LX FL U LX FL0.00 / 00. W LX FL Q LX FL V LX FL N LX FL R LX FL S LX FL /00 0. X LX FL LX FL000 ().00 () Incompatible with LCF0. Average consumption at 0 C for 0 or 0 Hz, cos j 0.: - inrush: 00 0 VA, - sealed: 0 VA. Operating cycles/hour (q y C): 00. Heat dissipation: 0 W. Operating time at Uc: closing 0 0 ms, opening ms. 0 /

30 References (continued) TeSys contactors TeSys F contactors a.c. 0 to 00 Hz supply coils References (continued) Low sealed consumption. Operate on networks with harmonic numbers y. Control circuit voltage Uc Average resistance at 0 C ± 0 % Inrush Sealed Inductance of closed circuit Voltage code Reference Weight V W W H kg For contactor LC F0 0/0. () 0 () 0. F LX FX0 ().000. () 0 () 0. FE LX FX0 ().000. () 0 () 0. G LX FX () /0. () 0 () 0. L LX FX00 () () 0 () 0. M LX FX0 () () 0 () 0. P LX FX0 () () 0 () 0. U LX FX0 ().000 /. () 0 (). W LX FX0 () () 0 (). Q LX FX0 () () 0 (). V LX FX0 ().000 /0. () 0 (). N LX FX () () 0 (). R LX FX () () 0 (). S LX FX00 ().000 Average consumption at 0 C for 0 or 0 Hz, cos j 0.: - inrush: VA, sealed: VA. Operating cycles/hour (q y C): 00. Heat dissipation: x W. Operating time at Uc: closing 0 0 ms, opening 0 0 ms. For contactor LC F00 Control circuit voltage Uc V Voltage code Rectifier Reference () Coil Reference Weight 0/ FE DR TEU LX FFW.0 0/0 P DR TEU LX FMW.0 0/0 V DR TES LX FQW.0 Operating cycles/hour (q y C): 00. Average consumption at 0 C for 0 or 0 Hz, cos j 0.: - inrush: 00 VA, sealed: VA Operating time at Uc: closing 0 0 ms, opening 0 0 ms. Control circuit voltage Uc Average resistance at 0 C ± 0 % Inrush Sealed Inductance of closed circuit Voltage code Reference kg Weight V W W H kg For contactors LC F00, LC F00 and LC F F LX FK0 () G LX FK00 () M LX FK0 () P LX FK0 () U LX FK () W LX FK0 ().0 0. Q LX FK00 () V LX FK00 ().0.. N LX FK0 () R LX FK0 () S LX FK0 ().0 Average consumption at 0 C for 0 or 0 Hz, cos j 0.: - inrush: VA, sealed: VA. Operating cycles/hour (q y C): 00. Heat dissipation: x W. Operating time at Uc: closing 0 ms, opening 00 0 ms. () Reference of set of identical coils, to be connected in series. () Value for the coils in series. () Rectifier to be ordered separately: 0.00 kg. () Order coils and connect them in series. 0 /

31 References TeSys contactors TeSys F contactors a.c. 0 to 00 Hz supply coils for specific applications () LX FFppp LX FGppp References Low sealed consumption. High tolerance to inrush voltage drops. Immune to micro-breaks (mains supply or contact chain). Operate on networks with harmonic numbers y. Control circuit voltage Uc Average resistance at 0 C ± 0 % Inrush Sealed Inductance of closed circuit Voltage code Reference Weight V W W H kg For contactors LC F and LC F E LX FF F LX FF FE LX FF /. G LX FF L LX FF M LX FF P LX FF U LX FF Q LX FF V LX FF N LX FF R LX FF S LX FF Average consumption at 0 C: inrush: 0 VA, sealed:.. VA. Heat dissipation:.. W. Operating cycles/hour (q y C): < 00. Operating time at Uc: closing ms, opening 0 ms. For contactors LC F and LC F E LX FG F LX FG FE LX FG / 0. G LX FG L LX FG M LX FG P LX FG U LX FG Q LX FG V LX FG N LX FG R LX FG S LX FG Average consumption at 0 C: inrush: 0 0 VA, sealed:. 0. VA. Heat dissipation:. W. Operating cycles/hour (q y C): < 00. Operating time at Uc: closing ms, opening 0 ms. For contactors LC F and LC F0. () LX FH /. () LX FH /. () LX FH 0.0 0/0. () LX FH () LX FH / 0 () LX FH () LX FH Average consumption at 0 C: inrush: 0 0 VA, sealed: 0 VA. Heat dissipation:. 0. W. Operating cycles/hour (q y C): < 00. Operating time at Uc: closing ms, opening ms. () Application examples: hoisting (inching, high operating rates), Main-Standby (unstable mains supplies). These coils are particularly suited for use at higher operating temperatures (mounting in non-ventilated compartments, enclosures, etc.). () Please consult your Regional Sales Office. 0 Schemes: page / /

32 References (continued) TeSys contactors TeSys F contactors a.c. 0 to 00 Hz supply coils for specific applications References (continued) Coils with short operating times (at Uc): - N/O: 0 ms, - N/C: 0 ms (a side); 0 ms (c side). Coils with high operating rates (q y 0 C): - 00 operating cycles/hour, - 00 for LC F0. 0 LX FJppp LX FKppp LX FLppp Coils with low inrush consumption. Control circuit voltage Uc Average resistance at 0 C ± 0 % Inrush Sealed Inductance of closed circuit Rectifier Reference () Coil Reference Weight V W W H kg For contactor LC F DR TFV LX FJ DR TEU LX FJ DR TEU LX FJ 0.0 0/0. DR TEU LX FJ 0.0 0/ 0 DR TES LX FJ DR TES LX FJ DR TES LX FJ 0.0 Average consumption: - inrush: 00 VA, - sealed: VA Heat dissipation:.. W. For contactor LC F DR TFV LX FK DR TEU LX FK DR TEU LX FK.00 0/0. 0 DR TEU LX FK.00 0/ 0 DR TES LX FK DR TES LX FK DR TES LX FK.00 Average consumption: - inrush: 0 VA, - sealed: VA Heat dissipation:. W. For contactor LC F DR TFV LX FL DR TEU LX FL DR TEU LX FL.0 0. DR TEU LX FL0.0 0/0.. DR TEU LX FL.0 0/00 0. DR TES LX FL.0 /0 0 0 DR TES LX FL DR TES LX FL.0 Average consumption: - inrush: 0 VA, - sealed: VA Heat dissipation:.. W. () Rectifier to be ordered separately: 0.00 kg. 0 Schemes: page / /

33 References TeSys contactors TeSys F contactors d.c. supply coils LX FFppp LX FHppp References Low sealed consumption. Operating cycles/hour (q y C): y 00. Control circuit voltage Uc Average resistance at 0 C ± 0 % Inrush Sealed Inductance of closed circuit Voltage code Reference Weight V W W H kg For contactors LC F and LC F0. BD LX FF ED LX FF FD LX FF GD LX FF 0.0 0/ MD LX FF UD LX FF / RD LX FF0 0.0 Average consumption: - inrush: W, - sealed:.. W. Operating time at Uc: closing 0 0 ms, opening 0 0 ms. For contactors LC F and LC F 0.. BD LX FG ED LX FG FD LX FG GD LX FG 0.0 0/ MD LX FG UD LX FG / RD LX FG0 0.0 Average consumption: - inrush: 0 W, - sealed:..0 W. Operating time at Uc: closing 0 0 ms, opening 0 0 ms. For contactors LC F and LC F0 0.. BD LX FH ED LX FH FD LX FH GD LX FH 0.0 0/ MD LX FH UD LX FH / RD LX FH0 0.0 Average consumption: - inrush: 0 W, - sealed:.. W. Operating time at Uc: closing 0 0 ms, opening 0 ms. For contactor LC F00. ED LX FJ FD LX FJ GD LX FJ MD LX FJ UD LX FJ RD LX FJ0 0.0 Average consumption: - inrush: 0 0 W, - sealed:. W. Operating time at Uc: closing 0 0 ms, opening 0 ms. 0 Schemes: page / /

34 References (continued) TeSys contactors TeSys F contactors d.c. supply coils LX FKppp References (continued) Low sealed consumption. Control circuit voltage Uc Average resistance at 0 C ± 0 % Inrush Sealed Inductance of closed circuit Voltage code Reference Weight V W W H kg For contactor LC F00. ED LX FK FD LX FK GD LX FK MD LX FK UD LX FK RD LX FK0.00 Average consumption: - inrush: 0 0 W, sealed:. W. - Operating cycles/hour (q y C): 00. Operating time at Uc: closing 0 0 ms, opening 0 ms. For contactor LC F0 and LC F0. 0. ED LX FL FD LX FL GD LX FL () MD LX FL UD LX FL RD LX FL0 ().0 () Incompatible with LC F0. Average consumption: - inrush: 0 0 W, sealed:.. W. - Operating cycles/hour (q y C): 00. Operating time at Uc: closing 0 0 ms, opening 0 0. For contactor LC F0 0. () 0 () 0. FD LX FX0 ().000. () 0 () 0. GD LX FX () () 00 () MD LX FX0 () () 0 (). UD LX FX0 () () 0 (). RD LX FX0 ().000 Average consumption: - inrush: 0 0 W, sealed: W. - Operating cycles/hour (q y C): 00. Operating time at Uc: closing 0 0 ms, opening 00 0 ms. For contactor LC F00 0/0 FW LX FFW.0 0/0 MW LX FMW.0 0/00 QW LX FQW.0 Heat dissipation: W. Operating time at Uc: closing 0 0 ms, opening 0 0 ms. For contactors LC F00, LC F00 and LC F00 0. FD LX FK0 ().00. GD LX FK0 () MD LX FK0 () UD LX FK () RD LX FK0 ().00 Average consumption: - inrush: W, sealed: 0 W. - Operating cycles/hour (q y C): 00. Operating time at Uc: closing 0 0 ms, opening 0 ms. () Reference of set of identical coils, to be connected in series. () Value for the coils in series. () Order coils and connect them in series. 0 Schemes: page / /

35 References TeSys contactors TeSys F contactors d.c. supply coils for specific applications References Coils with short operating times (at Uc) : - N/O: 0 ms, - N/C: 0 ms. Coils with high operating rates (q y 0 C): - 00 operating cycles/hour, - 00 for LC F0. LX FJppp LX FKppp LX FLppp Coils with low inrush consumption. Control circuit voltage Uc Average resistance at 0 C ± 0 % Inrush Sealed Inductance of Qty Reference Reference Weight Resistor () Coil closed required circuit V W W H kg For contactor LC F DR SC00 LX FJ DR SC00 LX FJ DR SC00 LX FJ DR SC00 LX FJ 0.0 0/0 00 DR SC00 LX FJ 0.0 Average consumption: - inrush: 0 W, - sealed: W. For contactor LC F DR SC00 LX FK DR SC00 LX FK.00.. DR SC00 LX FK DR SC000 LX FK.00 0/0 00 DR SC00 LX FK.00 Average consumption: - inrush: 0 W. - sealed: W. For contactor LC F DR SC00 LX FL DR SC00 LX FL DR SC00 LX FL DR SC000 LX FL.0 0/ DR SC00 LX FL.0 Average consumption: - inrush: W. - sealed: W. () Resistor to be ordered separately, weight of resistor: 0.00 kg. 0 Schemes: page / /