TeSys DF IEC-Type Fuseholders

Transcription

1 TeSys DF IEC-Type 9080CT Contents... Page Characteristics Accessories... Dimensions...5 Wirg diagrams...5 Fuses...6 7

2 Characteristics TeSys DF IEC-Type Fuseholder type DF8 DF0 DF DF DFCC Environment characteristics Conformg to standards IEC , UL 5, CSA - n 39 Protective treatment Degree of protection Conformg to IEC 6059 IP 0 TH, treatment for hot and humid environments Ambient air temperature Storage C ( F) ( ) For operation, with deratg () C ( F) ( ) Flame resistance Conformg to IEC C ( F) 960 (760) Pole characteristics Fuse size mm (ch) 8.5 x x 38 (0. x.5) x 5 (0.6 x 5) x 58 Utilization category AC0B Rated sulation voltage (Ui) V with tubular lks, a.c. supply Rated operational Hz 50/60 Rated impulse withstand voltage (Uimp) kv Conventional thermal current (Ith) for ambient air temperature y 0 C () With tubular lks A x 38 (0. x.5) CC fuse With am cartridge fuses A With gg cartridge fuses A Short-circuit characteristics (with tubular lks) Permissible short-time A ratg (low) (rms value Cos ϕ = 0.35) Conformg to IEC Maximum permissible peak value (dynamic stress) Conformg to IEC ka Certifications File E3069 CCN IZLT File E3069 CCN IZLT8 E3069 CCN IZLT Wire sizes (number of conductors x c.s.a.) M. Max. M. Max. M. Max. M. Max. M. Max. Solid wire mm (AWG) x.5 ( x ) x 5 ( x ) x 0 ( x 8) x.5 ( x ) x 35 ( x ) x 5 ( x ) x 6 () Tighteng torque Flexible wire without cable end mm (AWG) Flexible wire with cable end mm (AWG) Nm (lb-) x.5 ( x ) x.5 ( x ) x 5 ( x ) x 0 ( x 8) x 5 ( x ) x 0 ( x 8) x.5 x 35 ( x ) ( x ) x 5 ( x ) x.5 x 35 ( x ) ( x ) x 5 ( x ). (9) 3.5 (3) (35). (9) Characteristics of early break and signallg contacts DFAM and DFAM Rated sulation voltage (Ui) V 50 a.c. supply Conventional thermal current (Ith) for ambient air temperature y 0 C () A 5 Rated operational current V 8 V 7 V 0 V Category AC-5 A 3.5 Category DC-3 A Defition of rated characteristics Low load operatg characteristics Cablg Conformg to B300 IEC Mimum voltage V 0 Mimum current ma 30 Faston connectors () For use an stallation with ambient temp. > 0 C (68 F), apply a deratg coeffi cient: Max temperature C ( F) 0 (68) 30 (86) 0 (0) 50 () 60 (0) Max. relative humidity 95 % 90 % 80 % 50 % 50 % Current deratg coefficient x 6 () x 6 ()

3 TeSys DF IEC-Type () Conventional thermal current (Ith) Size of cartridge fuse or lk Composition P = Poles(s) N = Neutral A mm (ch) x 3.5 P DF (.5) N DF0N 0.07 (.50) P + N () 6 DF8N 0.3 (.66) P 6 DF8 0. (.30) 3 P DF (6.6) 3 P + N () 3 DF83N 0.5 (8.96) DF DF03N 3 0 x 38 (0. x.5) P DF (.5) N DF0N 0.07 (.50) P + N () 6 DF0N 0.3 (.66) P 6 DF0 0. (.30) 3 P DF (6.6) 3 P + N () 3 DF03N 0.5 (8.96) DF DF DF0NV DF3NC DF3NC DF03V 50 x 5 5 x 58 P 6 DF 0.0 (.9) N 6 DFN 0.50 (5.9) P + N () 3 DFN 0.90 (0.3) P 3 DF 0.80 (9.88) 3 P DF3C (3) 0.0 (.8) 3 P + N () DF3NC (3) (0.) P 6 DF 0.8 (7.69) N 6 DFN 0.38 (8.0) P + N () 3 DFN 0.56 (6.09) P 3 DF 0.36 (5.38) 3 P DF3C (3) 0.65 (3.07) 3 P + N () DF3NC (3) 0.89 (3.6) with blown fuse dicators (neon) () () Conventional thermal current (Ith) Size of cartridge fuse or lk Composition P = Pole(s) N = Neutral A mm (ch) x x 38 (0. x.5) P DF8V 0.06 (.6) P + N () 6 DF8NV 0.35 (.76) P 6 DF8V 0.5 (.) 3 P DF83V 0.86 (6.56) 3 P + N () 3 DF83NV 0.57 (9.07) P DF0V 0.06 (.6) P + N () 6 DF0NV 0.35 (.76) P 6 DF0V 0.5 (.) 3 P DF03V 0.86 (6.56) 3 P + N () 3 DF03NV 0.57 (9.07) DFNV DF3VC 50 x 5 P 6 DFV 0.3 (5.0) P + N () 3 DFNV 0.93 (0.3) P 3 DFV 0.83 (9.98) 3 P DF3VC (3) 0.3 (.9) 3 P + N () DF3NVC (3) (0.) x 58 P 6 DFV 0. (7.80) P + N () 3 DFNV 0.59 (6.9) P 3 DFV 0.39 (5.9) 3 P DF3VC (3) (3.8) 3 P + N () DF3NVC (3) (3.57) DFNV DF3VC () Each pole can be marked. A clip- marker holder is provided for this purpose. Clip- markers type AB Rp or AB Gp can also be used. () N: neutral pole fitted with a locked tubular lk as standard. (3) A letter C the catalog number dicates that the fuseholder can be fi tted with auxiliary early break, blown fuse signallg and fuse present signallg contacts. () Operational voltage of the blown fuse dicator: 0 V V. 3

4 TeSys DF IEC-Type DFCCV DFCC3V DF AMp Detail of assembly clip and p mountg () Conventional thermal current (Ith) Size of cartridge fuse or lk Composition P = Poles A 30 Class CC P DFCC 0.06 (.5) P 6 DFCC 0. (.30) 3 P DFCC (6.6) with blown fuse dicators (neon) () Conventional thermal current (Ith) Size of cartridge fuse or lk P = Poles A 30 Class CC P DFCCV 0.06 (.6) P 6 DFCCV 0.5 (.) 3 P DFCC3V 0.86 (6.56) Accessories Auxiliary early break and blown fuse signallg contacts () Size of cartridge fuse or lk mm (ch) DF x 5 (0.6 x 0) DF X 58 Fuseholder assembly kits (3) to be assembled Size of cartridge fuse or lk mm (ch) DF8 8.5 x 3.5 DF0 0 x 38 (0. x.5) DF x 5 DF x 58 Number of contacts DFAM 0.05 (0.88) DFAM 0.09 (.0) DFAM 0.03 (.3) DFAM (.3) Composition ps, clips 0 ps, 30 clips 0 ps, 30 clips Markg accessories Description Composition Markg Clip- markers Strip of 0 identical or letters DF0AP (0.5) 0 DFAP 0.05 (0.88) 0 DFAP 0.08 (0.99) ABRp () 0.00 (0.07) A Z 5 ABGp () 0.00 (0.07) () Each pole can be marked. A clip- marker holder is provided for this purpose. Clip- markers type AB Rp or AB Gp can also be used. () These auxiliary contacts provide the followg functions: early break, blown fuse signallg (if the Fuseholder is fitted with striker fuses) and fuse present signallg. (3) p and clips are required to assemble two DF8 or DF0 fuseholders together. p and 3 clips are required to assemble two DF or DF fuseholders together. () When orderg, replace the p the catalog number with the number or letter required. Example: AB-R or AB-GA. Note: DF0 and DFCC fuseholders have been subjected to a current withstand of Ip = 9 ka and T = 38 kas at 800 V ac maximum, 00 ka. DF fuseholders have been subjected to a current withstand of Ip =. ka and T = 30 kas at 750 V ac maximum, 00 ka. DF fuseholders have been subjected to a current withstand of Ip = 0. ka and T = kas at 750 V ac maximum, 00 ka. DF0, DF, and DF devices accept fuses which provide supplementary protection and have not been evaluated by UL for use where branch circuit protection is needed.

5 Dimensions, Wirg diagrams TeSys DF IEC-Type Dimensions: mm (ch) Modular fuseholders 5 A and 3 A Mountg on 35 mm 5 rail DF8 and DF8V DF0 and DF0V DF0N DFCC and DFCCV 58 (.8) DF8N and DF8NV DF8 and DF8V DF0N and DF0NV DF0 and DF0V DFCC and DFCCV DF83 and DF83V DF03 and DF03V DFCC3 and DFCC3V DF83N and DF83NV DF03N and DF03NV 83 (3.7) 0.5 (.59) 5 (.77) 7 (.85) 6 (.5) 5.5 (0.) Modular fuseholders 50 A Mountg on 35 mm 5 rail 70 (.76) (0.69) (.38) (.07) (.76) DF and DFV DFN DFN and DFNV DF and DFV DF3C and DF3VC DF3NC and DF3NVC 07 (.) 8.5 (.9) 5 (.77) 3.8 (0.5) 50.5 (.99) 6.5 (.03) 5.5 (.07) (3.0) 05 (.3) 76.5 (3.0) Modular fuseholders 5 A Mountg on 35 mm 5 rail DF and DFV DFN DFN and DFNV DF and DFV DF3C and DF3VC DF3NC and DF3NVC 70 (.76) Wirg diagrams Modular fuseholders DFp P DFp N DFp P + N DFp P N 3 DFp 3P DFp 3P + N N (.0) (.98) 5 (.77) 50.5 (.99) 76.5 (3.0) (0.039) 35 (.38) 70 (.76) 05 (.3) 0 (5.5) 5

6 TeSys DF IEC-Type DF6 and GK Cartridge fuses Cartridge fuses without striker, Type am Cartridge fuse type Maximum rated voltage Ratg mm (ch) Vac A g (oz) Cyldrical 8.5 x DFBA000 0 (0.35) 0 DFBA000 0 (0.35) 0 DFBA000 0 (0.35) 6 0 DFBA (0.35) 8 0 DFBA (0.35) 0 0 DFBA000 0 (0.35) DFCA DFEA DFFA Cyldrical 0 x 38 (0. x.5) Cyldrical x 5 C yldrical x DFCA00 0 (0.35) DFCA00 0 (0.35) DFCA005 0 (0.35) 0 DFCA0 0 (0.35) 0 DFCA0 0 (0.35) 0 DFCA0 0 (0.35) 6 0 DFCA06 0 (0.35) 8 0 DFCA08 0 (0.35) 0 0 DFCA0 0 (0.35) 0 DFCA 0 (0.35) 6 0 DFCA6 0 (0.35) DFCA0 0 (0.35) 5 0 DFCA5 0 (0.35) DFEA00 0 (0.7) DFEA005 0 (0.7) 0 DFEA0 0 (0.7) 0 DFEA0 0 (0.7) 0 DFEA0 0 (0.7) 6 0 DFEA06 0 (0.7) 8 0 DFEA08 0 (0.7) 0 0 DFEA0 0 (0.7) 0 DFEA 0 (0.7) 6 0 DFEA6 0 (0.7) 0 0 DFEA0 0 (0.7) 5 0 DFEA5 0 (0.7) 3 0 DFEA3 0 (0.7) 0 0 DFEA0 0 (0.7) DFEA50 0 (0.7) DFFA0 5 (.59) 6 0 DFFA06 5 (.59) 8 0 DFFA08 5 (.59) 0 0 DFFA0 5 (.59) 6 0 DFFA6 5 (.59) 0 0 DFFA0 5 (.59) 5 0 DFFA5 5 (.59) 3 0 DFFA3 5 (.59) 0 0 DFFA0 5 (.59) 50 0 DFFA50 5 (.59) DFFA63 5 (.59) 80 0 DFFA80 5 (.59) 00 0 DFFA00 5 (.59) DFFA5 5 (.59) 6

7 TeSys DF IEC-Type DF6 and GK Cartridge fuses DF3EA Cartridge fuses with striker, Type am Cartridge fuse type Maximum rated voltage Ratg mm (ch) Vac A g (oz) Cyldrical x DF3EA0 0 (0.7) 0 DF3EA0 0 (0.7) 6 0 DF3EA06 0 (0.7) 8 0 DF3EA08 0 (0.7) 0 0 DF3EA0 0 (0.7) 0 DF3EA 0 (0.7) 6 0 DF3EA6 0 (0.7) 0 0 DF3EA0 0 (0.7) 5 0 DF3EA5 0 (0.7) 3 0 DF3EA3 0 (0.7) 0 0 DF3EA0 0 (0.7) DF3EA50 0 (0.7) DF3FA C yldrical x DF3FA0 5 (.59) 6 0 DF3FA06 5 (.59) 8 0 DF3FA08 5 (.59) 0 0 DF3FA0 5 (.59) 6 0 DF3FA6 5 (.59) 0 0 DF3FA0 5 (.59) 5 0 DF3FA5 5 (.59) 3 0 DF3FA3 5 (.59) 0 0 DF3FA0 5 (.59) 50 0 DF3FA50 5 (.59) DF3FA63 5 (.59) 80 0 DF3FA80 5 (.59) 00 0 DF3FA00 5 (.59) DF3FA5 5 (.59) 7

8 The efficiency of Schneider Electric brand solutions Used combation, Schneider Electric products provide quality solutions, meetg all your Automation & Control application requirements. Operator dialog Software tools Motion & Drives Systems & architectures Interfaces and I/O Automation Motor control Detection Mountg systems Power supplies A worldwide presence Constantly available b More than 5,000 pots of sale 30 countries. b A range of products that are right for you and comply with the standards the country where they are used. Technical assistance wherever you are b Our technicians are at your disposal to assist you fdg the optimum solution for your particular needs. b Schneider Electric provides you with all necessary technical assistance, throughout the world. Schneider Electric USA 800 Knightdale Blvd. Knightdale, NC 755 USA -888-SquareD ( ) Electrical equipment should be stalled, operated, serviced, and mataed only by qualified personnel. No responsibility is assumed by Schneider Electric for any consequences arisg out of the use of this material. 008 Schneider Electric. All Rights Reserved. 9080CT080 November 008