Redline Unibis : the solution Circuit protection
|
|
- Alfred Cole
- 5 years ago
- Views:
Transcription
1 2 circuits in 1 mo Redline Unibis : the solution ircuit protection Unibis compact Ms are one of the latest introductions in the Redline range and are developed to reduce the size of the distribution board to the minimum. The performances are upgraded to 10k. Safety terminals Up to 6mm 2 + 4mm 2 wires combined. 3Nm Torque t.52
2 dule for space problems 1P+1P in 1 module 1P+N in 1 module 2P in 1 module 3P in 2 modules 4P in 2 modules randnew design: 2P in 1 module, 3 and 4P in 2 modules omplete range: from k (1), 2 40 mps, and curves 100% compatible with all Redline auxiliaries and accessories 100% quality and reliability acc. to N 60898, N, V, KM, IMQ certified 3 performances up to 10k 4.5k 6k 10k (1) (1) 10k acc. to I
3 The solution for ircuit protection Unibis compact Ms quality and reliability guaranteed High performance clips To fix the M to the IN rail. High performance torque Up to 3Nm. asy to replace ouble clips make it easy to replace the Ms, especially when a busbar is installed. Userfriendly ll screws are on the same level to work fast and easy. reen or red flag on toggle with isolation applications orrect information about the real position. Minimum 5mm distance between open contacts is ensured. Part of the family Unibis Ms fit perfectly in the Redline range. Safety terminals IP20 The capacity of Unibis terminals has been doubled. onnection possibilities: (2 x 4mm 2 ) or (1 x 4mm 2 ) + (1 x 6mm 2 ). ull functionality small auxiliary contact is the interface to the complete functionality of the Redline auxiliaries and accessories..54
4 renovations Saving up to 50% space in distribution boards! efore 18 x 2P Ms 36 MOULS IN 2 2P/1 mod. Replacing standard Ms by compact Unibis Ms OUT 1 x 2P/2 mod. R IN-RIL OR TNSIONS OR ISTRIUTION OR RU Y 50% ree IN-rail fter 18 x 2P Ms 18 MOULS.55
5 ircuit protection Technical data of compact Ms Series P 451N Standards N Tripping characteristics, Nominal current (In) 2-40 alibration temperature ( ) 30 Number of poles (# mod.) 1+N (1 mod.) Neutral pole protected - Nominal voltage Un 1P+N (V) 240 1P+1P (V) - 2P (V) - 3P (V) - 4P (V) - Nominal voltage Un 2P (V ) - requency (Hz) 50/60 in Thresh. magn. + 40% for 400 Hz Thresh. magn. + 50% Maximum service voltage Ub max (V) 250 Minimum service voltage Ub min (V) 12 Selectivity class (N ) 3 Rated insulation voltage Pollution degree 2 (V) 500 Pollution degree 3 (V) 400 Impulse withstand test voltage (kv) 6 Insulation resistance (M ) 1000 ielectric rigidity (kv) 2.5 Vibration resistance (in x,y,z direction) (I 77/16.3) (g) 3 ndurance lectrical at Un,In (1) Mechanical Utilisation category (N ) Mounting position: vertical/horizontal any Incoming top or bottom yes Protection degree (outside/inside enclosure with door) IP20/IP40 Selfextinguish degree (acc. UL 94) V2 Tropicalisation (acc. N /IN 40046) +55 /95%RH Operating temperature ( ) -25/+55 Storage temperature ( ) -55/+55 Terminal capacity Rigid cable min/max (top) (mm²) 1/16 (2) lexible cable min/max (top) (mm²) 1/10 (2) Rigid cable min/max (bottom) (mm²) 1/16 (2) lexible cable min/max (bottom) (mm²) 1/10 (2) Torque (Nm) 3 dd-on devices uxiliary contacts UN yes Tele U yes (3) Tele L yes (3) Tele MP yes (3) PS yes (3) usbar systems Pin (top/bottom) yes/yes ork (top/bottom) no/no ccessories yes Width per mod. (mm) 18 Weight per mod. (g) 125 Package 12 pprovals KM, IMQ - marking yes Page.60 Short-circuit capacity of compact Ms Series P 451N Short-circuit capacity (k) N/I Icn 1P+N 240 V 4.5 1P+1P 240 V - 2P 415 V - 3P 415 V - 4P 415 V - N Icu 1P+N 230 V 6 1P+1P 230 V - 2P 415 V - 3P 415 V - 4P 415 V - Short-circuit capacity N lcu 2P 96 V (1) 8000 for 32 and 40 (2) lso accepting (2x4mm²) or (1x4mm²)+(1x6mm²) (3) Requires UN auxiliary contact as interface.56
6 P 61N P 611 P 45 P 60 N N N N ,,,, N (1 mod.) 1P+1P (1 mod.) 2 (1 mod.), 3 and 4 (2 mod.) 2 (1 mod.), 3 and 4 (2 mod.) (4) /60 50/60 50/60 50/60 Thresh. magn. + 40% Thresh. magn. + 40% Thresh. magn. + 40% Thresh. magn. + 40% Thresh. magn. + 50% Thresh. magn. + 50% Thresh. magn. + 50% Thresh. magn. + 50% / / / (1) (1) (1) (1) any any any any yes yes yes yes IP20/IP40 IP20/IP40 IP20/IP40 IP20/IP40 V2 V2 V2 V2 +55 /95%RH +55 /95%RH +55 /95%RH +55 /95%RH -25/+55-25/+55-25/+55-25/+55-55/+55-55/+55-55/+55-55/+55 1/16 (2) 1/16 (2) 1/16 (2) 1/16 (2) 1/10 (2) 1/10 (2) 1/10 (2) 1/10 (2) 1/16 (2) 1/16 (2) 1/16 (2) 1/16 (2) 1/10 (2) 1/10 (2) 1/10 (2) 1/10 (2) yes yes yes yes yes (3) yes (3) yes (3) yes (3) yes (3) yes (3) yes (3) yes (3) yes (3) yes (3) yes (3) yes (3) yes (3) yes (3) yes (3) yes (3) yes/yes yes/yes yes/yes yes/yes no/no no/no no/no no/no yes yes yes yes /36 18/ / / /6 12/6 12/6 V, KM, IMQ V, IMQ IMQ, N V, IMQ, N, yes yes yes yes ompact Ms P 61N P 611 P 45 P 60 (k) (k) (k) (k) (1) 8000 for 32 and 40 (2) lso accepting (2x4mm²) or (1x4mm²)+(1x6mm²) (3) Requires UN auxiliary contact as interface (4) Single phase supply or same phase in 3Ph supply.57
7 haracteristics according to I/N Influence of ambient air temperature on the rated current Miniature ircuit reakers (M) are intended for the protection of wiring installations against both overloads and short-circuits in domestic or commercial wiring installations where operation is possible by uninstructed people. The maximum value of the current which can flow through an M depends of the nominal current of the M, the conductor cross-section as well as of the ambient air temperature. ircuit protection Tripping characteristic curves (N/I ) The values shown in the table below are for devices in free air. or devices installed with other modular devices in the same switchboard a correction factor (K) shall be applied relative to the mounting situation of the M, the ambient temperature and the number of main circuits in the installation (N ): No. of devices 2 or or to > alculation example Within a distribution panel consisting of eight Ms 2P16 with an operating ambient temperature of 45, which is the highest temperature at which the M can operate without unwanted tripping. K Magnetic release n electromagnet with plunger ensures instanta neous tripping in the event of short-circuit. The standard distinguishes two different types, follo wing the current for instantaneous release: type and. lcn Test Tripping pplications () current time 3 x ln 0.1 < t < 45s (In 32) Only for resistive loads such as: 0.1 < t < 90s (In > 32) - electrical heating 5 x ln t < 0.1s - water heater - stoves 5 x ln 0.1 < t < 15s (In 32) Usual loads such as: 0.1 < t < 30s (In > 32) - lighting 10 x ln t < 0.1s - socket-outlets - small motors Thermal release The release is initiated by a bimetal strip in case of overload. The standard defines the range of releases for specific overload values. Reference ambient temperature is 30. alculation The correction factor K=0.7, for use in an eight circuit installation: 16 x 0.7= 11.2 s the M is working at 45, another factor shall be applied (90% = 0.9): In at 45 = In at 30 x 0.9 = 11.2 x 0.9 = 10.1 The thermal calibration of the Ms was carried out at an ambient temperature of 30. mbient temperatures different from 30 influence the bimetal and this results in earlier or later thermal tripping. Test current Tripping time 1.13 x ln t 1h (ln 63) t 2h (ln > 63) 1.45 x ln t < 1h (ln 63) t < 2h (ln > 63) 2.55 x ln 1s < t < 60s (ln 32) 1 s < t < 120s (ln > 32).58
8 Tripping current as a function of the frequency Toggle The toggle permits to switch the M ON or O ll Ms are designed to work at frequencies of Hz, therefore to work at different values, consideration must be given to the variation of the tripping characteristics. The thermal tripping does not change with variation of the frequency but the magnetic tripping values can be up to 50% higher than the ones at Hz. or current magnetic tripping is 50% higher. Tripping current variations 60Hz 100Hz 200Hz 300Hz 400Hz Power losses The power losses are calculated by measuring the voltage drop between the incoming and the outgoing terminals of the device at rated current. Printing on the toggle provides information of the real contact position. 0-O ontacts in open position. nsures a distance between contacts > 5mm in the Unibis range. I-ON ontacts in closed position. nsures continuity in the main circuit. ompact Ms Power losses per pole In Voltage drop nergy loss Pw Resistance Z () (V) (W) (mohm)
9 ompact Ms Series P 451N ircuit protection pplications pprovals / Marking dd-on devices uxiliaries UN Tele L Tele U PS Tele MP When coupling an add-on device (Tele L, Tele U, PS, Tele MP) to the M, an universal UN auxiliary has to be coupled first as interface. uxiliary contacts pg.6 Performances N/I N/I k Thermal setting In () 2-40 Rated voltage Un (V) 240 Minimum operating voltage Umin (V) 12 Tripping caracteristics - Selectivity class 3 Mechanical/electrical endurance 20000/10000 (1) Tropicalisation acc. to N/I at 95% RH Terminal capacity flexible/rigid cable (mm²) (2) Poles 1P+N (1 mod) Weight (g) 125 Short-circuit capacity acc. to N/I Poles V Icn/Ics (k) 1P+N acc. to N/I Poles V Icu (k) 1P+N ttention: do not use on IT net configuration Series P 451N - 4.5k - characteristics - In () at. No. Ref. No. at. No. Ref. No. Pack. 1P + N 2 P 451N P 451N mod. 4 P 451N P 451N P 451N P 451N P 451N P 451N P 451N P 451N P 451N P 451N P 451N P 451N P 451N P 451N P 451N P 451N usbars pg.2 imensions pg.82 (1) 8000 for 32 and 40 (2) lso accepting (2x4mm²) or (1x4mm²)+(1x6mm²)
10 ompact Ms Series P 61N N/I N/I k pplications pprovals / Marking dd-on devices uxiliaries UN Tele L Tele U PS Tele MP When coupling an add-on device (Tele L, Tele U, PS, Tele MP) to the M, an universal UN auxiliary has to be coupled first as interface. uxiliary contacts pg.6 usbars pg.2 imensions pg.82 Performances Thermal setting In () 2-40 Rated voltage Un (V) 240 Minimum operating voltage Umin (V) 12 Tripping caracteristics - Selectivity class 3 Mechanical/electrical endurance 20000/10000 (1) Tropicalisation acc. to N/I at 95% RH Terminal capacity flexible/rigid cable (mm²) (2) Poles 1P+N (1 mod) Weight (g) 125 Short-circuit capacity acc. to N/I Poles V Icn/Ics (k) 1P+N acc. to N/I Poles V Icu (k) 1P+N ttention: do not use on IT net configuration Series P 61N - 6k - characteristics - In () at. No. Ref. No. at. No. Ref. No. Pack. 1P + N 2 P 61N P 61N mod. 4 P 61N P 61N P 61N P 61N P 61N P 61N P 61N P 61N P 61N P 61N P 61N P 61N P 61N P 61N P 61N P 61N P 61N P 61N (1) 8000 for 32 and 40 (2) lso accepting (2x4mm²) or (1x4mm²)+(1x6mm²) Series P 611N.61
11 Notes ircuit protection.62
12 ompact Ms Series P 611 N/I N/I k pplications pprovals / Marking dd-on devices uxiliaries UN Performances Thermal setting In () 2-20 Rated voltage Un (V) 230 (1) Minimum operating voltage Umin (V) 12 Tripping characteristics - Selectivity class 3 Mechanical/electrical endurance 20000/10000 Tropicalisation acc. to N/I at 95% RH Terminal capacity flexible/rigid cable (mm²) (2) Poles 1P+1P (1 mod) Weight (g) 125 Short-circuit capacity acc. to N/I Poles V Icn/Ics (k) acc. to N/I Poles V Icu (k) ttention: do not use on IT net configuration Series P 611 Tele L Tele U PS Tele MP When coupling an add-on device (Tele L, Tele U, PS, Tele MP) to the M, an universal UN auxiliary has to be coupled first as interface. Series P 611-6k - characteristics - In () at. No. Ref. No. at. No. Ref. No. Pack. 1P+1P 2 P P mod. 4 P P P P P P P P P P P P uxiliary contacts pg.6 (1) Single phase supply or same phase in 3Ph supply (2) lso accepting (2x4mm²) or (1x4mm²)+(1x6mm²) usbars pg.2 imensions pg.82.63
13 ompact Ms Series P 45 ircuit protection pplications pprovals / Marking dd-on devices uxiliaries UN Tele L Tele U PS Tele MP When coupling an add-on device (Tele L, Tele U, PS, Tele MP) to the M, an universal UN auxiliary has to be coupled first as interface. Performances N/I N/I k Thermal setting In () 2-40 (1) Rated voltage Un (V) 240/415 Minimum operating voltage Umin (V) 12 Tripping characteristics - Selectivity class 3 Mechanical/electrical endurance 20000/10000 (2) Tropicalisation acc. to N/I at 95% RH Terminal capacity flexible/rigid cable (mm²) (3) Poles 2, 3, 4 Weight (g/mod) 160 Short-circuit capacity acc. to N/I Poles V Icn/Ics (k) 2P P P acc. to N/I Poles V Icu (k) 2P P P acc. N/I Poles Un (V ) Icu (k) 2P (1) 32, 3P and 4P (2) 8000 for 32 (3) lso accepting (2x4mm²) or (1x4mm²)+(1x6mm²) uxiliary contacts pg.6 usbars pg.2 imensions pg.82.64
14 Series P k - characteristics - In () at. No. Ref. No. at. No. Ref. No. Pack. 2P 2 P P mod. 4 P P P P P P P P P P P P P P P P P 2 P (1) P (1) 6 2 mod. 4 P (1) P (1) 6 6 P (1) P (1) 6 10 P (1) P (1) 6 16 P (1) P (1) 6 20 P (1) P (1) 6 25 P (1) P (1) 6 32 P (1) P (1) 6 Series P 45 4P 2 P P mod. 4 P P P P P P P P P P P P P P (1) The auxiliary contact UN must be placed only on the left side of the 3P Ms.65
15 ompact Ms Series P 60 ircuit protection pplications pprovals / Marking dd-on devices uxiliaries UN Tele L Tele U PS Tele MP When coupling an add-on device (Tele L, Tele U, PS, Tele MP) to the M, an universal UN auxiliary has to be coupled first as interface. Performances N/I N/I k (1) Thermal setting In () 2-40 (2) Rated voltage Un (V) 240/415 Minimum operating voltage Umin (V) 12 Tripping caracteristics - Selectivity class 3 Mechanical/electrical endurance 20000/10000 (3) Tropicalisation acc. to N/I at 95% RH Terminal capacity flexible/rigid cable (mm²) (4) Poles 2, 3, 4 Weight/mod (g) 160 Short-circuit capacity acc. to N/I Poles V Icn/Ics (k) 2P 240/ P 240/ P 240/415 6 acc. to N/I Poles V Icu (k) 2P 240/ P 240/ P 240/415 6 (1) 6k at 415V (2) 32, 3P and 4P (3) 8000 for 32 (4) lso accepting (2x4mm²) or (1x4mm²)+(1x6mm²) uxiliary contacts pg.6 usbars pg.2 imensions pg.82.66
16 Series P 60-6k - characteristics - In () at. No. Ref. No. at. No. Ref. No. Pack. 2P 2 P P mod. 4 P P P P P P P P P P P P P P P P P 2 P (1) P (1) 6 2 mod. 4 P (1) P (1) 6 6 P (1) P (1) 6 10 P (1) P (1) 6 16 P (1) P (1) 6 20 P (1) P (1) 6 25 P (1) P (1) 6 32 (2) P (1) P (1) 6 Series P 60 4P 2 P P mod. 4 P P P P P P P P P P P P P P (1) The auxiliary contact UN must be placed only on the left side of the 3P Ms.67
Redline Edition Modular DIN-rail devices and residential enclosures. Just feel protected. GE Consumer & Industrial Power Protection
onsumer & Industrial Power Protection dition Modular INrail devices and residential enclosures Just feel protected imagination at work . Selection table of Miniature ircuit reakers (M s). Technical data.
More informationMiniature circuit breakers. Residual current circuit breakers. Busbar systems. Comfort functions/energy control. Residential enclosures
Residual current circuit breakers B...5 Five good reasons to appreciate the EG MCBs Benefits of the MCBs Series E90 Selection table Busbar systems C..8.....8.... Series E90N k Series E90E.5k Series E90
More informationMiniatur Circuite Breakers (MCB)
Redline Miniatur Circuite Breakers (MCB) Technical data MCB s Series Standards Tripping characteristics Nominal current Calibration temperature Number of poles (#mod) Neutral pole protected Nominal voltage
More informationMiniature circuit breakers. Residential current circuit breaker. Busbar systems. Comfort functions/energy control. Residential enclosures
...5..8.0....8.0....8.0....5 Five good reasons to appreciate the EG MCB's Benefits of the MCB's Series E90 Selection table Series E90N Miniature circuit breakers k Series E90E Miniature circuit breakers.5k
More informationMCB NB1-63H Miniature Circuit Breaker
NB-H Miniature Circuit Breaker. General. Function protection of circuits against short-circuit currents, protection of circuits against overload currents, switch, isolation, NB-H circuit-breakers are used
More information5SP and 5SY Supplementary Protection UL 1077
Product Guide 5SP and 5SY Supplementary Protection UL 077 for North merican and International applications usa.siemens.com/5sy Table of contents Certifications, standards, features and description Characteristic
More informationPerformance. Standards. Technical data
ilos Loadbreak disconnectors for INrail and wall mounting ilos up to ilos 2 up to los up to Order codes pplications pprovals / Marking ddon devices Performance INrail type and wall mounting type Main disconnector,
More informationGPS1B. Characteristics. Technical performances
Thermal and magnetic protection PS Motor protection devices Standards/pprovals 097, 0972, 097 N V 00T 0//2 UL/S UL/cULus Shipping approvals: RN ureau Lloyd s Register Veritas ermanischer Lloyd haracteristics
More informationC60N circuit breakers0 B, C and D curves IEC 60898: 6000 A, IEC : 10 ka
C0N circuit breakers0 B, C and s IEC 0898: 000 A, IEC 097-: 0 ka Function b The circuit-breakers combine the following functions: v protection of circuits against short-circuit currents v protection of
More information90 MCB MODULAR CIRCUIT BREAKERS FOR CIRCUIT PROTECTION
MCB - MTC - MT - MTHP Technical data TYPE MTC MT MTC45 MTC60 MTC100 MT 45 MT 60 Rated current (In) (A) 2-32 6-32 6-32 6-40 1-63 Utilization category A A A A A Rated operational voltage (Ue) (V) 230/400-240/415
More information5SJ4...-.HG Circuit Breakers to IEC and UL 489
Siemens AG 009 5SJ...-.HG Circuit Breakers to IEC and UL 89 BETA Low-Voltage Circuit Protection Compliance with industry standards is a must in today's manufacturing environment. Worldwide acceptance is
More informationSealing possibility Electrical endurance (ops) Mechanical endurance (ops) Overvoltage category Standards
Miniature circuit breaker ETIMAT 7,7 0.5 Rated voltage Rated current Rated frequency Rated short-circuit capacity Energy limiting class characteristic Build-in width Mounting on the rail 0/00 V AC, max.
More information90 MCB range Modular circuit breakers for circuit protection
MCB - MTC - MT - MTHP Technical data TYPE MTC MT MTC45 MTC60 MTC100 MT 45 MT 60 Rated current (In) (A) 2-32 6-32 6-32 6-40 1-63 Utilization category A A A A A Rated operational voltage (Ue) (V) 230 / 400
More informationThermal-Magnetic Circuit Breaker 2210-T2...
Thermal-Magnetic Circuit Breaker 0-T... Description One, two and three pole thermal-magnetic circuit breakers with trip-free mechanism and toggle actuation (S-type TM CBE to EN 6094/IEC 94). Featuring
More informationC120N circuit-breakers B, C and D curves EN 60898/EN 61009: IEC : 10 ka
C0N circuit-breakers B, C and D curves EN 09/EN 009: 0000 - IEC 097-: 0 ka function # protection of cables against overloads and short-circuits in final distribution # manual control and isolation # earth
More informationTeSys circuit-breakers
Presentation Thermal-magnetic motor circuit-breakers types GV2, GV and GV7 GV2-ME, GV2-P, GV-ME and GV7-R motor circuit-breakers are -pole thermal-magnetic circuit-breakers specifically designed for the
More informationBETA Protecting Miniature Circuit Breakers
Siemens AG 00 / Product overview / High-capacity range 000 A 0000 A 0000 A, high current 0000 A, universal current 000 A ka /0 Comfort range with plug-in terminal / Compact range +N in MW / Additional
More informationPerformance. Standards. Technical data
ilos Loadbreak disconnectors for wall mounting ilos H up to 5 ilos 3 up to ilos 4 up to Order codes pplications pprovals / Marking ilos H34 ilos H ddon devices Performance Wall mounting Main disconnector,
More informationNM1. Moulded Case Circuit Breaker NM1 P-084. Moulded Case Circuit Breakers. 2. Type designation. 1. General. 3. Classification N M 1- /
P0. Type designation N M / Type of Npole for P breaker* pplication: lank: for power distribution; : for motor protection elease type and accessory code (please refer to table on page 9) Number of poles
More informationThermal-Magnetic Circuit Breaker 2210-S2..
Thermal-Magnetic Circuit Breaker -S.. Description One, two and three pole thermal-magnetic circuit breakers with trip-free mechanism and toggle actuation (S-type TM CBE to EN 60934/IEC 934). Designed for
More informationThermal-Magnetic Circuit Breaker 2210-S2..
Thermal-Magnetic Circuit Breaker -S.. Description One, two and three pole thermal-magnetic circuit breakers with trip free mechanism and toggle actuation (S-type TM CBE to EN 6094/IEC 94). Designed for
More informationThermal-Magnetic Circuit Breaker 2210-S2...
Thermal-Magnetic Circuit Breaker 0-S... Description One, two and three pole thermal-magnetic circuit breakers with trip free mechanism and toggle actuation (S-type TM CBE to EN 60934/IEC 934). Designed
More informationThermal-Magnetic Circuit Breaker 2210-S2...
Description One, two and three pole thermal-magnetic circuit breakers with trip free mechanism and toggle actuation (S-type TM CBE to EN 6094/IEC 94). Designed for panel or plug-in mounting. Available
More informationVarius SUMMARY OF MODELS OF HRC FUSE-LINKS
SUMMARY OF MODELS OF HRC FUSE-LINKS Type PNA000 PHNA000 PNA00 PHNA00 Rated current I n up to A up to 0 A up to A up to 0 A Rated voltage U n AC 00 V, 00 V 90 V 00 V 90 V DC 0 V 0 V 0 V 0 V Fuse-link size
More informationRedline. Line protection by means of MCB s. Protection against overloads. Circuit Protection T1.2
Redline Circuit Protection Line protection by means of MCB s Protective devices shall be capable of breaking any overcurrent up to and including the prospective shortcircuit current at the point where
More informationThermal-Magnetic Circuit Breaker 2210-S2..
Thermal-Magnetic Circuit Breaker -S.. Description One, two and three pole thermal-magnetic circuit breakers with trip free mechanism and toggle actuation (S-type TM CBE to EN 60934/IEC 934). Designed for
More informationMagnetic and Hydraulic-Magnetic Circuit Breaker 8340-T...
Magnetic and Hydraulic-Magnetic Circuit Breaker 830-T... Description ngle, two and three pole magnetic and hydraulic-magnetic circuit breakers with trip-free mechanism and toggle actuation. A choice of
More informationSiemens AG Miniature Circuit Breakers. Totally Integrated Power SENTRON. Configuration. Edition 10/2014. Manual. siemens.
Siemens AG 05 Totally Integrated Power SENTRON Configuration Manual Edition 0/0 siemens.com/lowvoltage Siemens AG 05 Siemens AG 05 Introduction 5SL miniature circuit breakers 5SY and 5SP miniature circuit
More informationMiniature Circuit Breaker
Miniature Circuit Breaker SG-DPN I E C / E N 0 8 9 8-5 0 0 SG-DPN Applications Approval / Marking Function and Feature Integrate with switch phase and neutral in one module Protection against both overload
More informationOverload Relays. SIRIUS 3RU1 Thermal Overload Relays. 3RU11 for standard applications. 5/46 Siemens LV 1 AO 2011
SIRIUS 3RU1 Thermal Overview 1 2 7 3 4 6 "Increased safety" type of EEx e according to ATEX directive 94/9/EC The 3RU11 thermal overload relays are suitable for the overload of explosion-proof motors with
More informationAnalogue Meters CQ2x07 series
Analogue Meters CQ2x07 series Analogue Power Meters Active, reactive, apparent power meters and Power factor meters with exchangeable scales EQ0207/2207/0107/2107 & YQ0207/2207/0107/2107 o Measurement
More informationBETA Protecting. Low-Voltage Fuse Systems. LV HRC fuse links. 3/36 Siemens ET B1 2008
LV HRC fuse links Overview LV HRC fuses are used for installation systems in non-residential, commercial and industrial buildings as well as in switchboards of power supply companies. They therefore protect
More informationUL 1077 DIN Rail Supplementary Protectors
UL 0 DIN Rail Supplementary Protectors Product Overview UL 0 DIN Rail Supplementary Protectors PRODUCT OVERVIEW Product Overview Standard Features WMZS breaker terminals provide finger and back-of-hand
More informationFAZ tripping characteristics at 30 C: B, C, D to IEC/EN FAZ tripping characteristics at 30 C: R to IEC/EN
FAZ, AZ High-Capacity Tripping Characteristics Moeller HPL011-001/00 1/07 FAZ tripping characteristics at 0 C: B, C, D to IEC/EN 0 9 FAZ tripping characteristics at 0 C: R to IEC/EN 0 97 t [s] 700 00 100
More information7S SERIES. Relay module with forcibly guided contacts 6 A 7S S /0310 7S
Relay module with forcibly guided contacts.12 with 2 pole (1NO + 1 N).14 with 4 pole (2 NO + 2 N and 3 NO + 1 N).16 with 6 pole (4 NO + 2 N) For safety applications, with class A forcibly guided contact
More informationGeneral characteristics, Products
The Feature Packed line of Manual Motor Protectors Eaton s new XT family of Manual Motor Protectors (MMPs) features a pushbutton or rotary ON/OFF manual disconnect, Class adjustable bimetallic overload
More informationCDS. high density spring connection
CDS high density spring connection DENSTY STANDARD 1A CDS DENSTY A A spring connection CDS Series The originality of multipole connectors represents one of the core values of LE, a leading company in this
More informationTHE DIMENSIONING OF ELECTRICAL CONDUCTORS FOR USE IN "PANEL BOARDS" ADDRESSED TO HAZARDOUS AREAS - PART THREE
July 04 THE DIMENSIONING OF ELECTRICAL CONDUCTORS FOR USE IN "PANEL BOARDS" ADDRESSED TO HAZARDOUS AREAS - PART THREE In this third part. we want to speak about how important is the correct sizing of the
More information40 CD RANGE FLUSH-MOUNTING DISTRIBUTION BOARDS AND ENCLOSURES
DISTRIBUTION BOARDS FLUSH-MOUNTING DISTRIBUTION BOARDS GWTEST SOFTWARE (see page 322) Complementary system items Ordinary installation - protected flush mounting DISTRIBUTION / JUNCTION Protection devices...
More informationRequest Ensure that this Instruction Manual is delivered to the end users and the maintenance manager.
Request Ensure that this Instruction Manual is delivered to the end users and the maintenance manager. 1 -A - Introduction - Thank for your purchasing MITSUBISHI ELECTRIC MELPRO TM D Series Digital Protection
More informationCALEFFI. Modulating digital controller for heating and cooling. 161 series 01122/08 GB. replaces dp 01122/05
Modulating digital controller for heating and cooling series REGI ERED SI EN ISO 00:000 Cert. n FM UNI EN ISO 00:000 Cert. n 000 0/0 G replaces dp 0/0 Function The controller can be used with three-point
More information08/072 PKZ2 Motor-Protective Circuit-Breakers Tripping Characteristics
0/07 PKZ Tripping Characteristics Moeller HPL0-00/00 S-PKZ high-capacity contact module, SEA-PKZ contact module Normal switching duty AC-/00V kw A Rated output of three-phase motors 0...0 Hz. 7..... 0.7
More informationNon-Contact Safety Systems CMS
Selection table for non-contact safety system // Evaluation units Connection Desi Read head contact assembly Assured switch-on distance S ao [mm] Assured switch-on distance S ar [mm] Number of outputs
More informationFor the electronic measurement of current: DC, AC, pulsed..., with galvanic separation between the primary and the secondary circuit.
Current Transducer LDSR 0.3-TP/SP1 I P R N = 300 ma For the electronic measurement of current: DC, AC, pulsed..., with galvanic separation between the primary and the secondary circuit. Features Closed
More informationTo order, specify : Types Protection functions Current surge Asymmetry and loss of phase. Operating principle
otor protection relays - T - FWIT Since % of -phase motor failures are due to load problems or loss of phase, the CROUZET range of motor protection relays is indispensable! models give motor protection
More informationFor the electronic measurement of current: DC, AC, pulsed..., with galvanic separation between the primary and the secondary circuit.
Current Transducer HO-NP series I P N = 4, 6, 12, 15 A Ref: HO 4-NP, HO 6-NP, HO 12-NP, HO 15-NP For the electronic measurement of current: DC, AC, pulsed..., with galvanic separation between the primary
More informationThermal-Magnetic / Magnetic Only Molded Case Circuit Breakers Introduction
Thermal-Magnetic / Magnetic Only Molded ase ircuit reakers Introduction Table 8: reakdown of Typical atalog Number L 6 0 V reaker amily Y - mpere rame - 0 mpere rame K - 0 mpere rame L - mpere rame M 00
More informationSingle Socket and Horizontal Metering
idwest lectric Products Single Socket and Horizontal etering G pproved Single Socket etering G pproved pplication Information idwest s Single Socket etering products are designed for residential use. They
More information3VT4 Molded Case Circuit Breakers up to 1000 A
VT4 Molded Case Circuit Breakers up to 00 A Catalog Technical nformation VT4 Molded Case Circuit Breakers up to 00 A General data / - Overview Circuit breakers Switch disconnectors / - Selection and ordering
More informationMasterpact. Installation recommendations
90 Installation recommendations Presentation Functions and characteristics 9 Dimensions and connection 5 Electrical diagrams 8 Operating conditions 92 Installation in switchboard 9 Door interlock catch
More informationIssued August DATA SHEET. 3VT3 MCCB up to 630 A
ssued August 9 DATA SHEET VT MCCB up to 6 A Based on Siemens Catalog V 6 8 Circuit breakers Switch disconnectors Technical specifications Specifications Type VT 76-AA6/6/56-AA, VT 76-AA6/6/56-AA Circuit
More informationX T O B P 1 6 B C 1 S
9 Overload Relays XTOB, XTOT May 07 Contents Description Page Overload Relays XTOB, XTOT Selection................ 9 Product Selection.......... 95 Accessories............... 9 Technical Data and Specifications............
More informationINFORMATION TECHNOLOGY SYSTEMS SPDs FOR 19 TECHNOLOGY. NET Protector Surge Arrester. Protects switches, HUBs and telecommunication
Surge Arrester Protects switches, HUBs and telecommunication systems Class D according to EN 0 possible (Gigabit Ethernet) Variably equippable patch panels Units available with plug-in inputs and outputs
More informationTEST REPORT IEC/EN Circuit-breakers for over current protection for household and similar installations
Test Report issued under the responsibility of: TEST REORT IEC/EN 60898-1 Circuit-breakers for over current protection for household and similar installations Report Reference No.... : 130100913SHA-004
More informationC60 UL489 차단기. Standard features
60 UL89 차단기 Main functions of 60 UL 89 circuit breaker: b protection of circuits against: v short circuit currents v overload currents b control b isolation Various applications: b semi-conductors b electronic
More informationThermal-Magnetic / Magnetic Only Molded Case Circuit Breakers Introduction
Thermal-Magnetic / Magnetic Only Molded ase ircuit reakers Introduction Table 8: reakdown of Typical atalog Number L 3 6 0 V 2 reaker amily Y - mpere rame - mpere rame K - 2 mpere rame L - mpere rame M
More informationImformation of C091D series
Imformation of C09D series The QTY of contacts is -pin to -pin, the connection method for the thread type, pinhole connections for welding type, press-fit and PCB type. This series of connectors to prevent
More informationISOCON-3 MAINS POWERED ISOLATING SIGNAL CONVERTER
ISOCON-3 MAINS POWERED ISOLATING SIGNAL CONVERTER CAUTION: This equipment is designed for connection to mains voltages and must be used in accordance with this guide. If it is not, the safety protection
More informationMulti-function, economical instrument with 4 functions in the same casing. Accessibility and safety: large-dimension terminals Insulated circuits
200 > Measurement and instrumentation Programmable digital transducers TRIAD 2 range Programmable digital transducers with to 4 analogue outputs Programmable accuracy class PRODUCT ADVANTAGES Up to 4 PROGRAMMABLE
More informationTEST REPORT IEC :2002 Circuit-Breakers for overcorrect protection for household and similar installation
age 1 of 92 R e port ref. No.: C009-CB2012CQC-044407 Test Report issued under the responsibility of: TEST REORT IEC 60 898-1:2002 Circuit-Breakers for overcorrect protection for household and similar installation
More informationTechnical catalogue SmiSSline electrical protective devices in a system
Technical catalogue SmiSSline electrical protective devices in a system SmiSSline The original Shaping the future SmiSSline protection devices are simply snapped into a plug-in socket system. The arduous
More informationISOCON-6. 24V AC or DC POWERED ISOLATING SIGNAL CONVERTER
ISOCON-6 24V AC or DC POWERED ISOLATING SIGNAL CONVERTER Whilst every effort has been taken to ensure the accuracy of this document, we accept no responsibility for damage, injury, loss or expense resulting
More informationFor the electronic measurement of current: DC, AC, pulsed..., with galvanic separation between the primary and the secondary circuit.
Current Transducer HO-NSM series I PN = 8, 15, 25 A Ref: HO 8-NSM, HO 15-NSM, HO 25-NSM For the electronic measurement of current: DC, AC, pulsed..., with galvanic separation between the primary and the
More informationImpedance relay and protection assemblies
RXZK 21H, 22H, 23H 509 006-BEN Page 1 Issued June 1999 Changed since July 1998 Data subject to change without notice (SE970175) (SE970184) Features Micro-processor based impedance relay with R and X settings
More informationRef: HLSR 16-PW; HLSR 32-PW; HLSR 40-PW-000; HLSR 50-PW-000,
Digital Current Transducer HLSR-PW series I P N = 16... 50 A Ref: HLSR 16-PW; HLSR 32-PW; HLSR 40-PW-000; HLSR 50-PW-000, Bitstream output from on onboard Sigma Delta modulator. For the electronic measurement
More informationLED light engines LED linear / area. Module QLE G3+ ADV Modules QLE ADVANCED
Module QLE G3 ADV Modules QLE ADVANCED Product description Ideal for linear and panel lights Luminous flux range from 1, 5,25 lm LED system solution with outstanding system efficacy up to 162 lm/w, consisting
More informationFilm Capacitors. EMI suppression capacitors. Date: June 2018
Film Capacitors EMI suppression capacitors Date: June 2018 EPCOS AG 2018. Reproduction, publication and dissemination of this publication, enclosures hereto and the information contained therein without
More informationIssued August DATA SHEET. 3VT5 MCCB up to 1600 A
ssued August 9 DATA SHEET VT5 MCCB up to 0 A Based on Siemens Catalog V 8 Standard circuit breakers Releases Technical specifications Specifications VT5 circuit breakers Switch disconnectors Type Standards
More informationFor the electronic measurement of current: DC, AC, pulsed..., with galvanic separation between the primary and the secondary circuit.
Current Transducer HO-NP/SP33 series I PN = 8, 15, 25 A Ref: HO 8-NP/SP33, HO 15-NP/SP33, HO 25-NP/SP33 For the electronic measurement of current: DC, AC, pulsed..., with galvanic separation between the
More informationSIRCOVER Manual transfer switches from 125 to 3200 A
Manual transfer switches svr_149_a 3200 A Function are manual multipolar transfer switches with positive break indication. The family includes two ranges: AC for dead time switching (I-0-II), for overlapping
More informationBASE. Rotary limit switch. OptiOnS. FEAtuRES. CERtiFiCAtiOnS
Rotary limit switch BASE Rotary limit switch used to control and measure the movement of industrial machines. Its compact size make it suitable for use in narrow spaces. FEAtuRES It consists of a gear
More informationRotary Switches AC09, 16 and 32
09, 16 and 32 igital code output type escription FUJI series rotary switches offer a wide choice of output codes. They feature sliding u-flashed contacts for high contact reliability. Inhibitor and parity
More informationLED light engines LED linear / area
Module LLE G2 55mm 4lm ADV Modules LLE ADVANCED Product description Ideal for linear and panel lights LED system solution with outstanding system efficiency up to 165 lm/w, consisting of linear LED modules
More informationTeSys enclosed starters 2
Characteristics, references TeSys enclosed starters D..L. starters for motor control 0. to. kw with -phase thermal overload relay with protected phases Characteristics () Conforming to standards IEC 0--,
More information2.1. DOMINO Series DIMENSIONS QUALITY MARKS TECHNICAL CHARACTERISTICS VERSIONS BEHAVIOUR WITH CHEMICAL AND ATMOSPHERIC AGENTS. Acids.
DOMINO Series. CONSUMER UNITS AND REFERENCE STANDARDS DIMENSIONS EN 60670- Boxes and enclosures for electrical accessories for household and similar fixed electrical installations. Part : general requirements.
More informationLD-LP-LL-LC Rope Safety Switches with reset for emergency stop
TECHNICA DATASHEET D-P--C Rope Safety Switches with reset for emergency stop Metal or polymer housing, from one or three conduit entries Protection degree IP6 In conformity with EN ISO 13850 contact blocks
More informationMR medium rating busbar
technical information General features MR is fully compliant with S EN 0-, specifically, the rated current of the Zucchini busbar trunking systems is always rated at the average ambient temperature of
More informationTest Report issued under the responsibility of: SHA-001 Date of issue... : Total number of pages... : 292. Report Number...
D Test Report issued under the responsibility of: TEST REORT Residual current operated circuit-breakers without integral overcurrent protection for household and similar uses (RCCBs) art 1: General rules
More informationAbsolute encoders multiturn
elektronischer electronic multiturn, Multiturn, magnetic magnetisch Sendix M66 / M68 (shaft / hollow shaft) The Sendix M6 with Energy Harvesting Technology is an electronic multiturn encoder in miniature
More informationPHOENIX CONTACT - 04/2016. Features
Signal conditioner Data sheet 100238_de_06 1 Description PHOENIX CONTACT - 04/2016 Features The MCR-C-UI-UI(-450)-DCI(-NC) 3-way isolation amplifier is used to electrically isolate and convert analog signals.
More informationAmerican Zettler AZ742 RELAY Datasheet
American Zettler AZ74 RELAY Datasheet http://www.manuallib.com/american-zettler/az74-relay-datasheet.html FEATURES Dielectric strength 000 Vrms Low height:.7 mm Epoxy sealed version available 0 Amp switching
More informationProducts for Luminaire Protection and Power Adjustment Products
Products for uminaire Protection and Power Adjustment Products uminaire Protection evice For electronic devices When electronic components form part of lighting systems, it is often necessary to protect
More information8 Installation Equipment
8 Installation Equipment Plugs and Sockets CES System Series 8, 88, 8, 881 Te plugs and sockets in te CES system comply wit CEE publication 1 and European standards EN 0 01. Te small 1 A socket as switcing
More information16 Input AC Block I/O Module
6 Input AC Module Cat. No. 79-6A0 Series B Installation Mount the block I/O module in a vertical (recommended) or horizontal position. Allow sufficient room around the block for cooling air flow through
More informationH i g h A m p e r a g e 2 5 t o A M P. T y p e I & I I I V e h i c l e P r o t e c t i o n. I P 6 7 W a t e r p r o o f
H i g h A m p e r a g e 2 5 t o 3 0 0 A M P T y p e I & I I I V e h i c l e P r o t e c t i o n I P 6 7 W a t e r p r o o f I g n i t i o n - P r o t e c t e d S A E & A B Y C C o m p l i a n t L E D T
More informationInstallation Contactors ISU-xxx ISM-xxx
Installation Contactors ISU-xxx ISM-xxx Installation contactors are used in building technology switching cabinets of apartment blocks, office buildings, restaurants and hotels, shopping centres and hospitals
More informationCatalog Number. Catalog Number
ircuit reakers I-LIN Panelboards and Switchboards lass, 734, 8 I3 2- and 3-Pole 4.5 in (114 mm) Mounting Height Q2, Q2-H 2- and 3-Pole 3 in (7 mm) and 4.5 in (114 mm) Mounting Height rame, Thermal-Magnetic
More informationDigital Current Transducer HO-SW series I P N = A. Ref: HO 100-SW; HO 150-SW; HO 200-SW; HO 250-SW
Digital Current Transducer HO-SW series I P N = 100... 250 A Ref: HO 100-SW; HO 150-SW; HO 200-SW; HO 250-SW Bitstream output from on onboard Sigma Delta modulator. For the electronic measurement of current:
More informationTime - timing relays 1 Industrial relays, solid state output, width 22.5 mm
haracteristics Zelio ime - timing relays Industrial relays, solid state output, width. mm Presentation 08 he E9 range of relays is designed for simple, repetitive applications with short and intensive
More informationFL ballasts Electronic fixed output. PC TC PRO sr 1/2x11 42 W PC PRO compact
FL ballasts EL HE PC TC PRO sr 1/2x11 42 W PC PRO compact Product description CELMA Energy Efficiency Index A2 BAT / A2 T Nominal life-time up to 50,000 h (at ta 50 C with a failure rate max. 0.2 % per
More informationModular contactors for installation into distribution
Modular contactors for installation into distribution boards Modular contactors for installation into distribution boards Modular contactor for installation into distribution board Description Modular
More informationAmphenol C 091 A/B/D. Circular Connectors. Amphenol-Tuchel Electronics GmbH
Amphenol C 091 A/B/D Circular Connectors Amphenol-Tuchel Electronics GmbH General information These connectors are designed and produced in conformity with the low-voltage directive (/3/EWG) respectively
More informationTeSys contactors. TeSys D contactors. 690 V on a and c
Selection guide TeSys D contactors Applications All types of control system Rated operational current le max AC- (Ue y 0 V) A A A A A A le AC- (q y 0 C) 0/ A / A /0 A 0 A Rated operational voltage 0 V
More informationSeries MT. Applications. Features
Measurement Instruments Series MT pplications omfort functions unction Measurement, visualisation and logging of voltage, current, frequency, hours of operation, power, energy, cos ϕ, etc. Standards N
More informationLED modules LED linear / area
Module LLE G4 16mm 65lm ADV Module LLE advanced Product description Ideal for compact linear luminaires designs Homogenous illumination thanks to small package distance SELV module the single module has
More informationULTRA-SLIM POLARIZED RELAY. Initial breakdown voltage* 2. Unit weight. Ex. TN 2 L2 H 12V
TN ULTR-SLIM POLRIZED RELY TN-RELYS 4....8.8 SPEIFITIONS ontact rrangement Initial contact resistance max. (y voltage drop ) ontact material Rating power UL/S rating Expected life (min. operations) switching
More informationAnalog - Digital multimeters
CAT-IV -3, MI, Satpur, Nashik-4 7,India. Tel.: +9 53 6, ax : +9 53 3564 Page of / 5 / I I / 7 / B Automatic Terminal Blocking System (ABS) The automatic Terminal blocking system prevents incorrect connection
More informationCompact and highly reliable type available in many varieties. Typical Specifications. Output signal. Rating. Operating life
1 11mm Size ompact and highly reliable type available in many varieties. Typical Specifications Output signal Items Specifications Two phase of, B Three phase of, B and (1H) Self-return switch (11 / 10B)
More informationATyS Automatic and remotely operated transfer switches from 125 to 3200 A
atys-p_001_b atys_d_001_a_1_cat ATyS p I-0-II 4P ATyS d I-0-II 4P Function The ATyS are three-phase motorised transfer switches with positive break indication. They enable the on load transfer of two three-phase
More informationTeSys DF IEC-Type Fuseholders
TeSys DF IEC-Type 9080CT080 08 Contents... Page Characteristics......3 Accessories... Dimensions...5 Wirg diagrams...5 Fuses...6 7 Characteristics TeSys DF IEC-Type Fuseholder type DF8 DF0 DF DF DFCC Environment
More information