55% OFF CARBIDE HIGH SPEED STEEL COBALT. Phone: (616) Toll-Free: Fax: (616) cbdekorne.com

Transcription

1 CARBIDE HIGH SPEED STEEL COBALT Phone: () - Toll-Free: Fax: () - cbdekorne.com PLEASE TAKE % OFF PRINTED S END MICRO END THREAD COUNTER SINKS CHAMFER DRILL TAPS & DIES

2

3 OUR COMMITMENT TO YOU... H 00% USA MADE PREMIUM INDUSTRIAL QUALITY PRODUCTS H 9% ORDER FULFILLMENT H SAME DAY SHIPPING H EXCEPTIONAL QUALITY CONTROL H NO MINIMUM ORDER REQUIREMENTS

4 PVD Coatings Multi Layer ~ Physical Vapor Deposition Increases cutting tool performance in terms of wear resistance, abrasion prevention, corrosion and oxidation at high temperatures. Many of our tools are available in a variety of coatings which increase cutting tool performance in terms of wear resistance, abrasion prevention, corrosion and oxidation at high temperatures. Based on PVD technology (Physical Vapor Deposition) and using Cathode ARC technology, we offer the highest standard of modern coating technology for High Speed Steel, M Cobalt and Tungsten Carbide.

5 PVD Coatings Multi Layer ~ Physical Vapor Deposition ALCRO-MAX ALCRO-MAX is a high performance Coating from the PLATIT coatings family. It is based on AlCrN with a titanium addition. Triple coatings are deposited with sections freely programmed in one batch. ALCRO-MAX has been engineered to give an optimum balance between the toughness of the core layer and the abrasion resistance of the top nano-layer. Titanium s addition reduces the adhesive wear compared to conventional AlCrN coatings, also increasing the micro-hardness up to 00Hv and stops the crack propagation through the coating. Our case histories have shown ALCRO-MAX out performs ALTIN in multiple applications. ALCRO-MAX is recommended for a wider range of materials and exotics including high temp alloys, stainless steels, alloy steels, cast iron, high temp nickel base alloys, titanium alloys, hardened tool steel up to 0 HRc, and inconel. This coating has an excellent thermal and chemical stability. Which means it keeps its mechanical properties at very high temperatures up to 90 C. ALCRO-MAX has the best overall properties of any coating we offer and outperforms all generic coatings available on the market. ALTIN ALTIN is a high performance coating for milling, drilling, and tapping. This coating works well in a wide range of materials and exoctics including high temp alloys, stainless steels, alloy steels, cast iron, high temp nickel base alloys, titanium alloys, and inconel. ALTIN is extremely heat resistant and can be used with or without coolant. It is exceptional in difficult to machine materials where adhesive wear is particularly high. TICN TICN is a general purpose coating used for milling, drilling and tapping in all stainless steels, and a wide variety of other materials. This would be an option when ALTIN cannot be used, as in applications that can t generate the speeds and feeds required for higher cutting temperatures. ZRN ZRN is a high performance coating for milling non-ferrous materials such as aluminum, brass and bronze applications. It prevents edge build up that is typical in soft and sticky materials. This coating allows for higher speed and feed rates as well as prolonged tool life. ZRN does not have an affinity for aluminum. TIN TIN is a general purpose coating for drilling and tapping in a wide variety of materials, and generally used in applications with lower cutting speeds.

6 Index HIGH PERFORMANCE CARBIDE END pages - VI-PRO - VARIABLE INDEX CARBIDE END VI-PRO - Information Page Flute - Stub & Regular Length - Square End - ALCRO-MAX Flute - Long & Extra Long Length - Square End - ALCRO-MAX Corner Radius - ALCRO-MAX Flute - Stub Length - Corner Radius - ALCRO-MAX Flute - Regular Length - Corner Radius - ALCRO-MAX Flute - Long Length - Flute - Extra Long Length - Corner Radius - ALCRO-MAX Flute - Stub & Regular Length - Ball Nose - ALCRO-MAX Flute - Long & Extra Long Length - Ball Nose - ALCRO-MAX 9 Flute - Stub & Regular Length - Square End - ALCRO-MAX 0 Flute - Long & Extra Long Length - Square End - ALCRO-MAX Corner Radius - ALCRO-MAX Flute - Stub Length - Corner Radius - ALCRO-MAX Flute - Regular Length - Corner Radius - ALCRO-MAX Flute - Long Length - Flute - Extra Long Length - Corner Radius - ALCRO-MAX Corner Radius - ALCRO-MAX Flute - Regular Length - Square End & Corner Radius - ALCRO-MAX Flute - Long Length - Square End & THREAD - INTERNAL/EXTERNAL UN Threads - ALTIN UN Threads - Coolant End Fed - ALTIN 9 NPT Pipe Threads - ALTIN 0 NPTF Pipe Threads - ALTIN 0 Metric Threads - ALTIN GENERAL PURPOSE CARBIDE TOOLS pages - 9 ROUGHERS Flute - Fine Pitch - Stub Length - 0º - Uncoated, ALTIN Flute - Fine Pitch - Regular & Long Length - 0º - Uncoated, ALTIN Flute - Fine Pitch - Regular Length - 0º - Ball Nose - Uncoated, ALTIN Flute - Finisher - Regular Length - 0º - Corner Radius - Uncoated, ALTIN S ARE SUBJECT TO CHANGE WITHOUT NOTICE.

7 Index YOUR # PREMIUM SOURCE QUALITY FOR AMERICAN-MADE AMERICAN-MADE PREMIUM CUTTING CUTTING TOOLS TOOLS GENERAL PURPOSE CARBIDE TOOLS pages - 9 ALUMINUM Flute - Regular Length - º - For Aluminum - Square End & Flute - Long Length - º - For Aluminum - Square End & Flute - Regular Length - º - For Aluminum - Square End & Flute - Long Length - º - For Aluminum - Square End & Corner Radius - Uncoated & ZRN Corner Radius - Uncoated & ZRN Corner Radius - Uncoated & ZRN Corner Radius - Uncoated & ZRN 9 END - SINGLE END Flute - Regular Length - º - Square End & Corner Radius - Uncoated & ALTIN 0 Flute - Regular Length - 0º - Square End & Corner Radius - Uncoated & ALTIN Corner Radius - Uncoated & ALTIN Flute - Stub Length - º - Square End & Flute - Regular Length - º - Square End & Corner Radius - Uncoated & ALTIN Flute & Flute - Stub Length - 0º - Square End & Ball Nose - Uncoated & ALTIN - Flute - Regular Length - 0º - Square End - Uncoated, ALTIN & TICN Flute - Long & Extra Long Length - 0º - Square End - Uncoated, ALTIN & TICN Flute - Regular Length - 0º - Ball Nose - Uncoated, ALTIN & TICN Flute - Long & Extra Long Length - 0º - Ball Nose - Uncoated, ALTIN & TICN 9 Flute - Regular Length - 0º - Square End - Uncoated, ALTIN & TICN 0 Flute - Long & Extra Long Length - 0º - Square End - Uncoated, ALTIN & TICN Flute - Regular Length - 0º - Ball Nose - Uncoated, ALTIN & TICN Flute - Long & Extra Long Length - 0º - Ball Nose - Uncoated, ALTIN & TICN Flute - Regular Length - 0º - Corner Radius - Uncoated Flute - Regular Length - 0º - Corner Radius - ALTIN Flute - Long Length - 0º - Corner Radius - Uncoated Flute - Long Length - 0º - Corner Radius - ALTIN Flute - Extra Long Length - 0º - Corner Radius - Uncoated Flute - Extra Long Length - 0º - Corner Radius - ALTIN 9 Flute - Regular Length - Metric - 0º - Square End - Uncoated & ALTIN 0 Flute - Regular Length - Metric - 0º - Ball Nose - Uncoated & ALTIN END - DOUBLE END Flute - Stub Length - 0º - Square End & Ball Nose - Uncoated & ALTIN Flute - Stub Length - 0º - Square End & Ball Nose - Uncoated & ALTIN Flute - Regular Length - 0º - Square End & Ball Nose - Uncoated & ALTIN Flute - Regular Length - 0º - Square End & Ball Nose - Uncoated & ALTIN S ARE SUBJECT TO CHANGE WITHOUT NOTICE.

8 Index GENERAL PURPOSE CARBIDE TOOLS pages - 9 DRILL Flute - 0º Point - Uncoated & ALTIN Flute - 0º Point - Uncoated & ALTIN Flute - 90º Point - Uncoated & ALTIN Flute - 90º Point - Uncoated & ALTIN 9 CHAMFER & Flute - Single End - 0º, º, 90º, 00º, 0º Point - Uncoated & ALTIN 0 & Flute - Double End - 0º, º, 90º, 00º, 0º Point - Uncoated & ALTIN CARBIDE N/C Spotting - 90º, 0º & 0º - Uncoated & ALTIN - Stub Length - º Split Point - Fractional, Letter & Wire Sizes - Uncoated & ALTIN - Jobber Length - º Split Point - Fractional, Letter, Wire & Metric Sizes - Uncoated & ALTIN - Straight Flute - 0º Split Point - Fractional, Letter & Wire Sizes - Uncoated & ALTIN - 9 CARBIDE Straight Flute - Fractional, Wire, Letter, Metric & Decimal 0 - Special Sizes - Quantity Pricing SA Cylindrical SB Cylindrical End Cut 9 SC Cylindrical Ball Nose 90 SD Ball Shape 9 SE Egg Shape 9 SF Round Nose Tree 9 SG Pointed Tree 9 SH Flame Shape 9 SJ Included Angle 9 SK Included Angle 9 SL Included Angle With Radius 9 SM Pointed Cone 9 SN Inverted Taper 9 Bur Sets 9 S ARE SUBJECT TO CHANGE WITHOUT NOTICE.

9 Index YOUR # PREMIUM SOURCE QUALITY FOR AMERICAN-MADE AMERICAN-MADE PREMIUM CUTTING CUTTING TOOLS TOOLS MICRO END - CARBIDE pages 9-9 Micro Endmill Introduction 9-99 Flute - Stub Flute - Square End - Uncoated & ALTIN 00 Flute - Stub Flute - Ball Nose - Uncoated & ALTIN 0 Flute - Regular Flute - Square End - Uncoated & ALTIN 0-0 Flute - Regular Flute - Ball Nose - Uncoated & ALTIN 0-0 Flute - Stub Flute - Square End - Uncoated & ALTIN 0 Flute - Stub Flute - Ball Nose - Uncoated & ALTIN 0 Corner Radius - Uncoated & ALTIN 0 Corner Radius - Uncoated & ALTIN 09 Flute - Stub Flute - Flute - Regular Flute - Flute - Regular Flute - Square End - Uncoated & ALTIN 0 - Flute - Regular Flute - Ball Nose - Uncoated & ALTIN - Flute - Long Reach - Stub Flute - Square End - Uncoated & ALTIN - Flute - Long Reach - Stub Flute - Ball Nose - Uncoated & ALTIN - Flute - Long Reach - Regular Flute - Square End - Uncoated & ALTIN - 9 Flute - Long Reach - Regular Flute - Ball Nose - Uncoated & ALTIN 0 - Flute - Long Reach - Long Flute - Square End - Uncoated & ALTIN - Flute - Long Reach - Long Flute - Ball Nose - Uncoated & ALTIN - Flute - Long Flute - Square End - Uncoated & ALTIN - Flute - Long Flute - Ball Nose - Uncoated & ALTIN - 9 END - M COBALT pages 0 - Roughing - Coarse & Fine Pitch - Uncoated & ALTIN Flute, Flute & Flute - Single End - Regular Length - 0º - Square End - Uncoated & ALTIN - Flute & Flute - Double End - 0º - Square End - Uncoated & ALTIN COUNTERSINKS 0 pages - Machine Countersinks - Single Flute, Flute & Flute - Carbide - 0º, º, 90º & 00º Combined Drill & Countersinks - Carbide - Regular Length 0º - Uncoated & ALTIN Combined Drill & Countersinks - HSS - Regular Length 0º - Uncoated & TIN Combined Drill & Countersinks - HSS - Miniature 0º - Uncoated Combined Drill & Countersinks - M Cobalt - Regular Length 0º - Uncoated Combined Drill & Countersinks - HSS - Long Length 0º - Uncoated Four Flute Machine - HSS - 0º, º Single Flute - HSS - 0º, º, 90º S ARE SUBJECT TO CHANGE WITHOUT NOTICE.

10 Index TAPS & DIES pages - PREDATOR - HIGH PERFORMANCE TAPS Spiral Point - Uncoated, Steam Oxide, ALTIN & TICN Metric - Spiral Point - Uncoated, Steam Oxide, ALTIN & TICN 9 Spiral Flute Semi Bottoming - Uncoated, Steam Oxide, ALTIN & TICN 0 Metric - Spiral Flute Semi Bottoming - Uncoated, Steam Oxide, ALTIN & TICN GENERAL PURPOSE GROUND THREAD TAPS Thread Forming - Single Thread Chamfer, Bottom, Plug - HSS Thread Forming - Metric - Single Thread Chamfer, Bottom, Plug - HSS Thread Forming - Single Thread Chamfer, Bottom, Plug - HSS - TIN Thread Forming - Metric - Single Thread Chamfer, Bottom, Plug - HSS - TIN Taper Pipe NPT Taper Pipe NPT Interrupted - HSS - Uncoated, Steam Oxide & TIN Taper Pipe NPTF Dryseal Taper Pipe NPTF Dryseal Interrupted - HSS - Uncoated & TIN Straight Pipe NPS NPT Extension Taper Pipe - HSS - Uncoated & TIN º Helix - Semi Bottoming - HSS º Helix - Semi Bottoming - Metric - HSS Hand - Taper, Plug, Bottom & Sets - HSS - Hand - Taper, Plug & Bottom - HSS - Steam Oxide Hand - Plug & Bottom - HSS - Nitride & Steam Oxide Hand - Taper, Plug, Bottom & Sets - HSS - TIN Hand - Metric - Taper, Plug, Bottom & Sets - HSS - Uncoated Hand - Metric - Taper, Plug, Bottom & Sets - HSS - TIN Spiral Point Plug - HSS Spiral Point Plug - HSS - Steam Oxide, Nitride & Steam Oxide Spiral Point Plug - HSS - TIN & ALTIN 9 Spiral Point Plug - Metric - HSS - Uncoated & TIN 0 Spiral Point Bottoming - HSS - Uncoated & TIN 0 STI - Screw Thread Insert +.00 Oversize - HSS Combination Drill & Tap - HSS Combination Drill & Tap - Metric - HSS Pulley - Plug Small Shank Extension - Spiral Point Plug - HSS DIES Carbon Steel Dies - Adjustable Round Split, Hexagon Rethreading, NPT Hexagon Rethreading HSS Dies - Adjustable Round Split Die Stocks T-Handle Tap Wrenches S ARE SUBJECT TO CHANGE WITHOUT NOTICE. -

11 Index YOUR # PREMIUM SOURCE QUALITY FOR AMERICAN-MADE AMERICAN-MADE PREMIUM CUTTING CUTTING TOOLS TOOLS TWIST - HSS & M COBALT pages - Drill Sets - 9 Jobber Length - º Point - HSS - Bright, TIN & Oxided 0 - Jobber Length - Metric - º Point - HSS - Oxided Jobber Length - Heavy Duty - º Split Point - HSS - Oxided Jobber Length - Heavy Duty - º Split Point - HSS - Black/Gold Mechanics Length - Heavy Duty - º Split Point - Black/Gold - Flatted Shank - HSS Screw Machine Length - Heavy Duty - º Split Point - HSS - Oxided Taper Length - º Point - HSS - Oxided Taper Shank - º Point - HSS - Oxided 9 Screw Machine Length - Heavy Duty - º Split Point - M Cobalt 0 Screw Machine Length - Heavy Duty - º Split Point - M Cobalt - ALTIN Jobber Length - Heavy Duty - º Split Point - M Cobalt Jobber Length - Heavy Duty - º Split Point - M Cobalt - ALTIN Silver & Deming - HSS, Cobalt & Black/Gold - A/C Extension - Overall Length - HSS Oxided & M Cobalt A/C Extension - Overall Length - HSS Oxided & M Cobalt Extra Length - Overall Length - HSS - Bright Screw Extractors - HSS - HSS & M COBALT pages 9 - Chucking - Straight Shank - Straight Flute - HSS & M Cobalt 9-9 Chucking - Intermediate Sizes - HSS 9-99 Chucking - Straight Shank - Straight Flute - Special Sizes - HSS & M Cobalt 00-0 Chucking - Straight Shank - Right Hand Spiral - Right Hand Cut - HSS & M Cobalt 0-0 Dowel Pin Sizes - HSS & M Cobalt 0 Expansion - HSS 0-09 Hand - Straight Shank - Straight Flute & Left Hand Spiral - Right Hand Cut - HSS 0 - Taper Shank - Straight Flute - HSS Taper Pipe Taper Pin - HSS Capscrew Counterbores - HSS Construction - Black/Gold Safety Reamers Bridge Reamers - HSS Reamer Sets - HSS & M Cobalt S ARE SUBJECT TO CHANGE WITHOUT NOTICE. 9

12 Index TECHNICAL INFORMATION pages - 0 HIGH PERFORMANCE CARBIDE Variable Index Endmills Calculation Formulas, Coating Information, Weldon Flat Specifications Speed and Feed chart for Flute VI-PRO - 9 Speed and Feed chart for Flute VI-PRO 0 - Speed and Feed chart for Flute VI-PRO - Threadmills - Speed and Feed chart, and Calculation Formulas GENERAL PURPOSE CARBIDE End Mills Calculation Formulas, General Recommendations Information Speed and Feed chart for & FL º Helix, FL º & 0º Helix, and FL º Helix End Mills - Speed and Feed chart for & FL 0º Helix End Mills - 9 Trouble Shooting Guide Chamfer Mills - Speed and Feed chart 0 Roughing End Mills - Speed and Feed chart Burs - General information and Speed Chart Drills - Speed and Feed chart MICRO END - CARBIDE Speed and Feed chart TAPS PREDATOR High Performance Speed Chart Thread Forming Speed Chart, Calculation Formulas and general guidlines - General Purpose Technical Information - HSS Element and dimensional tolerances for, & flute drills Speed and Feed chart 9 - HSS & CARBIDE Technical Information 0 DECIMAL EQUIVALENT CHART Tap sizes of fraction, wire, letter and metric sizes S ARE SUBJECT TO CHANGE WITHOUT NOTICE. 0 inside back cover

13 HIGH PERFORMANCE VI-PRO is a High Performance, carbide end mill, that incorporates the ultimate in variable index geometry. Our flute configuration produces a harmonics shift, resulting in minimal chatter and an exceptional finish. Used in all slotting, roughing, profiling and finishing applications High Performance, chatter free machining provides versatility in use for all ferrous materials High-Performance VI-PRO carbide end mill utilizes an Eccentric Relief on the cutting edge that provides enhanced edge strength and a smoother cutting action. Advantages of Eccentric Relief vs Primary/Secondary Relief Designed for use in Alloy Steels, Inconel, Cast Iron, Titanium, Stainless Steel, High Temp and all other exotic materials up to 0HRc CUTTING EDGE PROFILE Enables higher SFM and heavier chip loads Eccentric Relief on the cutting edge provides enhanced edge strength Available in, & Flute - Stub, Regular, Long & Extra Long Lengths ECCENTRIC RELIEF Edge has full support permitting higher feed rates and progressive wear is countered by increased flute thickness. Why use VI-PRO Available in Square End, Ball Nose and various Corner Radius sizes PRIMARY/SECONDARY RELIEF Edge is relatively weak and does not support radial forces, has minimal contact area for wear. Corner Radius tools? The tools improve productivity and reduce costs. Post polished ALCRO-MAX coating covers a wide range of materials A sharp corner of an end mill is its weakest point. The corner radius design strengthens the end mill by reducing chipping and providing longer tool life. Made in the USA from premium micrograin carbide Extensive offering of Corner Radius tools: Stub, Regular, Long and Extra Long Lengths, with radius starting at 0.00 up to 0.0. Benefits of Post polishing ALCRO-MAX by nature of the coating process leaves tiny droplets of the coating on the surface of the tool. Proven results have shown that the removal of these droplets provide a smoother tool surface which results in a better cut. Perhaps the most important benefit, is that the tool is able to run at faster feed rates due to the smoothness of the flute area. This results in better chip evacuation and cooler temperatures resulting in longer tool life. Otec Post Polishing technology

14 HIGH PERFORMANCE Carbide Endmills VI-PRO - - STUB - SQUARE END ALCRO-MAX COATED H H H TOOL ATTRIBUTES H H H ROUND VI-PRO - METER # FL ITEM # / / / / / / / / / / / / / / / / / / / / / / / / / / -/ -/ -/ WELDON FLAT ITEM # REGULAR - SQUARE END VI-PRO - ALCRO-MAX COATED H H H TOOL ATTRIBUTES H H H ROUND THREAD METER # FL ITEM # / / / / / / / / / / / / / / / / / / / / / 9/ / / -/ -/ -/ -/ -/ -/ -/ -/ WELDON FLAT ITEM # The VI-PRO performs very well in a wide range of materials including: HIGH TEMP ALLOYS STAINLESS STEELS ALLOY STEELS INCONEL CAST IRON HIGH TEMP NICKEL BASE ALLOYS TITANIUM ALLOYS EXOTICS For coating information see page. For VI-PRO technical information, please see pages -9. TOLERANCES / - / / - METER +.000, , , , -.000

15 HIGH PERFORMANCE Carbide Endmills - LONG - SQUARE END ALCRO-MAX COATED ROUND # FL ITEM # / / / / / / / / / / / / / / / / -/ -/ -/ -/ -/ -/ -/ WELDON FLAT ITEM # VI-PRO - H H H TOOL ATTRIBUTES H H H METER VI-PRO - H H H TOOL ATTRIBUTES H H H ROUND METER # FL ITEM # / / / / / / / / / / / / / / -/ -/ WELDON FLAT ITEM # The VI-PRO performs very well in a wide range of materials including: HIGH TEMP ALLOYS STAINLESS STEELS ALLOY STEELS INCONEL CAST IRON HIGH TEMP NICKEL BASE ALLOYS TITANIUM ALLOYS EXOTICS THREAD ALCRO-MAX COATED VI-PRO - - EXTRA LONG - SQUARE END For coating information see page. For VI-PRO technical information, please see pages -9. TOLERANCES / - / / - METER +.000, , , , -.000

16 HIGH PERFORMANCE Carbide Endmills VI-PRO - - STUB - CORNER RADIUS ALCRO-MAX COATED VI-PRO - H H H TOOL ATTRIBUTES H H H ROUND METER # FL RAD ITEM # / / / / / / / / / / / / / / / / / / / / / / / / / / -/ -/ -/ VI-PRO - ITEM # The VI-PRO performs very well in a wide range of materials including: HIGH TEMP ALLOYS STAINLESS STEELS ALLOY STEELS INCONEL CAST IRON HIGH TEMP NICKEL BASE ALLOYS TITANIUM ALLOYS EXOTICS For coating information see page. For VI-PRO technical information, please see pages -9. TOLERANCES / - / / - / METER +.000, , , , THREAD WELDON FLAT RADIUS +.00, , -.00

17 HIGH PERFORMANCE Carbide Endmills CORNER RADIUS ALCRO-MAX COATED # FL RAD ITEM # / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / 9/ 9/ 9/ / / / / / / -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ WELDON FLAT ITEM # VI-PRO - ROUND VI-PRO - H H H TOOL ATTRIBUTES H H H METER THREAD - REGULAR - VI-PRO - For coating information see page. For VI-PRO technical information, please see pages -9. TOLERANCES / - / / - METER +.000, , , , RADIUS +.00, , -.00

18 HIGH PERFORMANCE Carbide Endmills VI-PRO - - LONG - CORNER RADIUS ALCRO-MAX COATED VI-PRO - VI-PRO - H H H TOOL ATTRIBUTES H H H ROUND METER # FL RAD ITEM # / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ WELDON FLAT ITEM # The VI-PRO performs very well in a wide range of materials including: HIGH TEMP ALLOYS STAINLESS STEELS ALLOY STEELS INCONEL CAST IRON HIGH TEMP NICKEL BASE ALLOYS TITANIUM ALLOYS EXOTICS For coating information see page. For VI-PRO technical information, please see pages -9. TOLERANCES / - / / - METER +.000, , , , RADIUS +.00, , -.00 THREAD PVD coatings increase cutting tool performance

19 HIGH PERFORMANCE Carbide Endmills CORNER RADIUS ALCRO-MAX COATED ROUND # FL RAD ITEM # / / / / / / / / / / / / / / / / / / / / / / / / / / / / -/ -/ -/ -/ WELDON FLAT ITEM # The VI-PRO performs very well in a wide range of materials including: HIGH TEMP ALLOYS STAINLESS STEELS ALLOY STEELS INCONEL CAST IRON HIGH TEMP NICKEL BASE ALLOYS TITANIUM ALLOYS EXOTICS For coating information see page. For VI-PRO technical information, please see pages -9. TOLERANCES METER +.000, , , , RADIUS +.00, , -.00 THREAD / - / / - VI-PRO - H H H TOOL ATTRIBUTES H H H METER VI-PRO - - EXTRA LONG - VI-PRO - All our high performance tools ship in premium packaging

20 HIGH PERFORMANCE Carbide Endmills VI-PRO - - STUB - BALL NOSE ALCRO-MAX COATED H H H TOOL ATTRIBUTES H H H ROUND VI-PRO - METER # FL ITEM # / / / / / / / / / / / / / / / / / / / / / / / / / / -/ -/ -/ WELDON FLAT ITEM # REGULAR - BALL NOSE VI-PRO - ALCRO-MAX COATED H H H TOOL ATTRIBUTES H H H ROUND THREAD METER # FL ITEM # / / / / / / / / / / / / / / / / / / / / / 9/ / / -/ -/ -/ -/ -/ -/ -/ -/ WELDON FLAT ITEM # The VI-PRO performs very well in a wide range of materials including: HIGH TEMP ALLOYS STAINLESS STEELS ALLOY STEELS INCONEL CAST IRON HIGH TEMP NICKEL BASE ALLOYS TITANIUM ALLOYS EXOTICS For coating information see page. For VI-PRO technical information, please see pages -9. TOLERANCES / - / / - METER +.000, , , , -.000

21 HIGH PERFORMANCE Carbide Endmills VI-PRO - - LONG - BALL NOSE ALCRO-MAX COATED ROUND # FL ITEM # / / / / / / / / / / / / / / / / -/ -/ -/ -/ -/ -/ -/ WELDON FLAT ITEM # VI-PRO - H H H TOOL ATTRIBUTES H H H METER H H H TOOL ATTRIBUTES H H H ROUND METER # FL ITEM # / / / / / / / / / / / / / / -/ -/ ,0. WELDON FLAT ITEM # ,09. The VI-PRO performs very well in a wide range of materials including: HIGH TEMP ALLOYS STAINLESS STEELS ALLOY STEELS INCONEL CAST IRON HIGH TEMP NICKEL BASE ALLOYS TITANIUM ALLOYS EXOTICS THREAD ALCRO-MAX COATED VI-PRO - - EXTRA LONG - BALL NOSE For coating information see page. For VI-PRO technical information, please see pages -9. TOLERANCES / - / / - METER +.000, , , ,

22 HIGH PERFORMANCE Carbide Endmills VI-PRO - - STUB - SQUARE END ALCRO-MAX COATED H H H TOOL ATTRIBUTES H H H ROUND VI-PRO - METER # FL ITEM # / / / / / / / / / / / / / / / / / / / / / / / -/ -/ WELDON FLAT ITEM # REGULAR - SQUARE END VI-PRO - ALCRO-MAX COATED H H H TOOL ATTRIBUTES H H H ROUND THREAD METER # FL ITEM # / / / / / / / / / / / / / / / / / / / 9/ / / -/ -/ -/ -/ -/ -/ -/ WELDON FLAT ITEM # The VI-PRO performs very well in a wide range of materials including: HIGH TEMP ALLOYS STAINLESS STEELS ALLOY STEELS INCONEL CAST IRON HIGH TEMP NICKEL BASE ALLOYS TITANIUM ALLOYS EXOTICS For coating information see page. For VI-PRO technical information, please see pages, 0-. TOLERANCES / - / / - 0 METER +.000, , , , -.000

23 HIGH PERFORMANCE Carbide Endmills VI-PRO - - LONG - SQUARE END ALCRO-MAX COATED ROUND # FL ITEM # / / / / / / / / / / / / / / -/ -/ -/ -/ -/ -/ -/ WELDON FLAT ITEM # VI-PRO - H H H TOOL ATTRIBUTES H H H METER H H H TOOL ATTRIBUTES H H H ROUND METER # FL ITEM # / / / / / / / / / / / / -/ -/ ,0. WELDON FLAT ITEM # ,09. The VI-PRO performs very well in a wide range of materials including: HIGH TEMP ALLOYS STAINLESS STEELS ALLOY STEELS INCONEL CAST IRON HIGH TEMP NICKEL BASE ALLOYS TITANIUM ALLOYS EXOTICS THREAD ALCRO-MAX COATED VI-PRO - - EXTRA LONG - SQUARE END For coating information see page. For VI-PRO technical information, please see pages, 0-. TOLERANCES / - / / - METER +.000, , , , -.000

24 HIGH PERFORMANCE Carbide Endmills VI-PRO - - STUB - CORNER RADIUS ALCRO-MAX COATED H H H TOOL ATTRIBUTES H H H ROUND VI-PRO - METER # FL RAD ITEM # / / / / / / / / / / / / / / / / / / / / / / / -/ -/ WELDON FLAT ITEM # The VI-PRO performs very well in a wide range of materials including: VI-PRO - HIGH TEMP ALLOYS STAINLESS STEELS ALLOY STEELS INCONEL CAST IRON HIGH TEMP NICKEL BASE ALLOYS TITANIUM ALLOYS EXOTICS For coating information see page. For VI-PRO technical information, please see pages, 0-. TOLERANCES / - / / - / METER +.000, , , , RADIUS +.00, , -.00 THREAD The VI-PRO Flute Stub Length comes in radius sizes; 0.00, 0.0, 0.00

25 HIGH PERFORMANCE Carbide Endmills CORNER RADIUS ALCRO-MAX COATED # FL RAD ITEM # / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ WELDON FLAT ITEM # The VI-PRO performs very well in a wide range of materials including: HIGH TEMP ALLOYS STAINLESS STEELS ALLOY STEELS INCONEL CAST IRON HIGH TEMP NICKEL BASE ALLOYS TITANIUM ALLOYS EXOTICS VI-PRO - ROUND VI-PRO - H H H TOOL ATTRIBUTES H H H METER THREAD - REGULAR - VI-PRO - For coating information see page. For VI-PRO technical information, please see pages, 0-. TOLERANCES / - / / - METER +.000, , , , RADIUS +.00, , -.00

26 HIGH PERFORMANCE Carbide Endmills VI-PRO - - LONG - CORNER RADIUS ALCRO-MAX COATED VI-PRO - VI-PRO - H H H TOOL ATTRIBUTES H H H ROUND METER # FL RAD ITEM # ITEM # / / -/ / / -/ / / -/ / / -/ / / -/ / / -/ / / / / / / -/ / / -/ / / -/ / / -/ / / For coating information see page. For VI-PRO technical information, please see pages, 0-. TOLERANCES / - / / - METER +.000, , , , THREAD WELDON FLAT RADIUS +.00, , -.00

27 HIGH PERFORMANCE Carbide Endmills CORNER RADIUS ALCRO-MAX COATED H H H TOOL ATTRIBUTES H H H ROUND METER # FL RAD ITEM # ITEM # / / -/ / / -/ / / / / / / / / / / / / / / / / / / / / / ,0.0,09. -/ ,0.0,09. WELDON FLAT For coating information see page. For VI-PRO technical information, please see pages, 0-. / - / / - METER +.000, , , , RADIUS +.00, , -.00 THREAD TOLERANCES VI-PRO - VI-PRO - - EXTRA LONG - VI-PRO -

28 HIGH PERFORMANCE Carbide Endmills VI-PRO - - REGULAR - SQUARE END ALCRO-MAX COATED H H H TOOL ATTRIBUTES H H H WELDON FLAT ROUND VI-PRO - METER # FL ITEM # / / / / / / / / / / / / / / -/ -/ -/ -/ -/ -/ -/ REGULAR - ITEM # CORNER RADIUS VI-PRO - ALCRO-MAX COATED THREAD H H H TOOL ATTRIBUTES H H H ROUND METER # FL RAD ITEM # / / / / / / / / / / / / / / -/ -/ -/ -/ -/ -/ -/ WELDON FLAT ITEM # The VI-PRO performs very well in a wide range of materials including: HIGH TEMP ALLOYS STAINLESS STEELS ALLOY STEELS INCONEL CAST IRON HIGH TEMP NICKEL BASE ALLOYS TITANIUM ALLOYS EXOTICS For coating information see page. For VI-PRO technical information, please see pages, -. TOLERANCES ALL S METER +.000, , RADIUS +.00, -.00

29 HIGH PERFORMANCE Carbide Endmills VI-PRO - - LONG - SQUARE END ALCRO-MAX COATED # FL ITEM # / / / / / / / / / / / / -/ -/ -/ -/ -/ ITEM # VI-PRO - CORNER RADIUS ALCRO-MAX COATED H H H TOOL ATTRIBUTES H H H ROUND METER # FL RAD ITEM # / / / / / / / / / / / / -/ -/ -/ -/ -/ WELDON FLAT ITEM # The VI-PRO performs very well in a wide range of materials including: HIGH TEMP ALLOYS STAINLESS STEELS ALLOY STEELS INCONEL CAST IRON HIGH TEMP NICKEL BASE ALLOYS TITANIUM ALLOYS EXOTICS VI-PRO - - LONG - WELDON FLAT ROUND METER THREAD H H H TOOL ATTRIBUTES H H H For coating information see page. For VI-PRO technical information, please see pages, -. TOLERANCES ALL S METER +.000, , RADIUS +.00, -.00

30 HIGH PERFORMANCE Carbide Threadmills INTERNAL/EXTERNAL - UN THREADS VI-PRO - ALTIN COATED VI-PRO - VI-PRO - THREAD METER CUTTING THREAD # FL - / / / / / / / / - 0 / / / - / / / - / / 0. / - / /. / - / / - / / - / / - 0 / / - / / 9 9. / - 0 / / / - / / 9. 9/ - / / 9 9. / - / / 0. / - / /. / - 0 / /. / - / /. / - 9 / /.0 / - / / / / For coating information see page. For technical information please see page. THREADMILL CUTTING METER TOLERANCE +.000, -.00

31 HIGH PERFORMANCE Carbide Threadmills VI-PRO - INTERNAL/EXTERNAL - UN THREADS COOLANT END FED END VIEW CUTTING THREAD # FL 0 - / / - 0 / / 0.00 / - / / 0.00 / - / / 0.00 / - / / 0.00 / - / / - / / - / / - 0 / / - / / / - 0 / / 9.00 / - 0 / / / - / / For coating information see page. For technical information please see page , -.00 THREAD THREADMILL CUTTING METER TOLERANCE VI-PRO - METER VI-PRO - ALTIN COATED 9

32 HIGH PERFORMANCE Carbide Threadmills INTERNAL/EXTERNAL - NPT PIPE THREADS VI-PRO - ALTIN COATED VI-PRO - METER CUTTING THREAD # FL / - / /. / - / / 9. / - / / - / / - / /. / - / /. - -/ / INTERNAL/EXTERNAL - NPTF PIPE THREADS VI-PRO - ALTIN COATED THREAD METER CUTTING THREAD # FL / - / / 0. / - / /. / - / / - / / - / / 9. / - / / / / For coating information see page. For technical information please see page. THREADMILL CUTTING METER TOLERANCE , -.00

33 HIGH PERFORMANCE Carbide Threadmills CUTTING THREAD # FL M x 0.0 / M. x 0. M x 0.0 M x.00 M x 0. M x.00 M x. M0 x. / / / / / / / M0 x.0 / M x.00 / M x. / M x. / M x.0 / M x.00 / M x.0 / M0 x.00 / / -/ -/ -/ / -/ -/ -/ -/ -/ -/ For coating information see page. For technical information please see page , -.00 THREAD THREADMILL CUTTING METER TOLERANCE VI-PRO - METER VI-PRO - ALTIN COATED VI-PRO - INTERNAL/EXTERNAL METRIC THREADS

34 Carbide End Mills FINE PITCH ROUGHER - - STUB - 0º HELIX END ALTIN COATED DRILL DRILL # FL # FL / / /.9 / / / 9.9 / / /. / / / 9.9 / / 9/.9 / / 9/ 9 9. / / / -/ 9 9. / / / -/ 9. / / / 0 9. / / / 9. / /. / / CHAMFER CHAMFER Our fine pitch rougher is designed to remove maximum material with minimum vibration or chatter, while milling faster than conventional finishing end mills. Excellent for: HARDENED STEELS TITANIUM INCONEL SPACE AGE MATERIALS For coating information see page. For technical information, please see page. TOLERANCES / - / / - / METER +.000, , , , -.000

35 Carbide End Mills # FL # FL / / / -/ 9. / / / -/. / / / -/.9 / / / -/.9 / / / -/ 9. / / / -/ 99. / / -/ 9 0. / / -/. / / -/ -/ 00. / / -/ -/ 9. / / -/. / / -/ FINE PITCH ROUGHER - - LONG - 0º HELIX ALTIN COATED # FL # FL / / -/ 0.9 / / -/.0 / / -/ / / -/. / / -/ 0. / / -/.0 / / 0. / /.0 / / -/ 0. / / -/ 9. / / -/. / / -/ /. -/. CHAMFER CHAMFER DRILL DRILL ALTIN COATED END FINE PITCH ROUGHER - - REGULAR - 0º HELIX HARDENED STEELS TITANIUM INCONEL SPACE AGE MATERIALS For coating information see page. For technical information, please see page. TOLERANCES / - / / - METER +.000, , -.00 Our fine pitch rougher is designed to remove maximum material with minimum vibration or chatter, while milling faster than conventional finishing end mills. Excellent for: -.000, , -.000

36 Carbide End Mills FINE PITCH ROUGHER - REGULAR - BALL NOSE - 0º HELIX END DRILL DRILL # FL CHAMFER CHAMFER / / / -/ 90. / / / -/ 9.0 / / -/ / / -/ 9.0 / / -/ -/ / / -/ ALTIN COATED # FL / / / -/.00 / / / -/ / / -/ 0.0 / / -/ 9.0 / / -/ -/ / / -/.0.0 Our fine pitch rougher is designed to remove maximum material with minimum vibration or chatter, while milling faster than conventional finishing end mills. Excellent for: HARDENED STEELS TITANIUM INCONEL SPACE AGE MATERIALS For coating information see page. For technical information, please see page. TOLERANCES / - / / - METER +.000, , , , -.000

37 Carbide End Mills # FL RAD / / / -/ / / / -/ / / / -/ / -/ / -/ -/ /* / -/ / # FL RAD / / / -/ / / / -/ / / / -/ / / -/ /* / -/ -/ /* / -/ / * * WITH WELDON FLATS ALTIN COATED * * WITH WELDON FLATS CHAMFER CHAMFER / /* DRILL DRILL END ROUGHER/FINISHER CORNER RADIUS - 0º HELIX - REGULAR - Works well in hard to machine materials such as stainless steel and titanium. For coating information see page. For technical information, please see page. TOLERANCES ALL S METER +.000, , The radius chipbreakers in this high performance tool allow for higher feed rates than a finishing endmill yet does not appreciably degrade the finish that the tool produces. RADIUS +.00, -.00

38 Carbide End Mills FOR ALUMINUM - REGULAR - SQUARE END - º HELIX END ZRN COATED DRILL DRILL # FL # FL / / / -/ / / / -/ 9.09 / / / 9.09 / / / 90. / / / -/ 9.9 / / / -/ 9 0. / / / -/ 9 9. / / / -/ CHAMFER CHAMFER / / -/ 9. / / -/ 9 / / -/ 99. / / -/ / / -/ -/ 909. / / -/ -/ 9 0. / / -/ 90. / / -/ / 9.0 -/ FOR ALUMINUM CORNER RADIUS - º HELIX - REGULAR - # FL RAD ZRN COATED # FL RAD / / / -/ / / / -/ / / / / / / / / -/ / / -/ / / / -/ / / / -/ / / -/ / / -/ / / -/ / / -/ / / / / -/ -/ / / -/ -/ / / -/ / / -/ / / These flute roughing tools are designed specifically for high speed machining in aluminum. This tool will plunge, slot and profile in all non-ferrous materials. Our ZRN coating allows for higher speed rates and prolonged tool life and does not have an affinity for aluminum. Works well in all non-ferrous materials as well as brass and bronze applications For coating information see page. For technical information, please see pages -. TOLERANCES / - / / - METER +.000, , , , RADIUS +.00, , -.00

39 Carbide End Mills # FL # FL / / / -/ 99. / / / -/ 99.0 / / / -/ 9 0. / / / -/ 99.0 / / -/ 9. / / -/ / / -/ 9. / / -/ / / -/ / / -/ 99 / / / / 99. / / -/ 99.0 / / -/ 999. / / -/ / / -/ / FOR ALUMINUM CORNER RADIUS - º HELIX - LONG - # FL RAD ZRN COATED # FL RAD / / / -/ / / / -/ / / / -/ / / / -/ / / -/ / / -/ / / -/ / / -/ / / -/ / / -/ / / / / / / -/ / / -/ / / -/ / / -/ / / These flute roughing tools are designed specifically for high speed machining in aluminum. This tool will plunge, slot and profile in all non-ferrous materials. Our ZRN coating allows for higher speed rates and prolonged tool life and does not have an affinity for aluminum. -/ CHAMFER CHAMFER ZRN COATED DRILL DRILL END FOR ALUMINUM - LONG - SQUARE END - º HELIX Works well in all non-ferrous materials as well as brass and bronze applications For coating information see page. For technical information, please see pages -. TOLERANCES / - / / - METER +.000, , , , RADIUS +.00, , -.00

40 Carbide End Mills FOR ALUMINUM - REGULAR - SQUARE END - º HELIX END ZRN COATED DRILL DRILL CHAMFER CHAMFER # FL # FL / / / -/ 9 0. / / / -/ / / / / / / 99. / / / -/ 99.9 / / / -/ / / / -/ / / / -/ / / -/ 9. / / -/ 9. / / -/ 9. / / -/ / / -/ -/ 9. / / -/ -/ / / -/ 9. / / -/ / / 9.00 FOR ALUMINUM CORNER RADIUS - º HELIX - REGULAR - # FL RAD ZRN COATED # FL RAD / / / -/ / / / -/ / / / / / / / / / -/ / / / -/ / / / -/ / / / -/ / / -/ / / -/ / / -/ / / -/ / / -/ -/ / / -/ -/ / / -/ / / -/ / / These flute roughing tools are designed specifically for high speed machining in aluminum. This tool will plunge, slot and profile in all non-ferrous materials. Our ZRN coating allows for higher speed rates and prolonged tool life and does not have an affinity for aluminum. Works well in all non-ferrous materials as well as brass and bronze applications For coating information see page. For technical information, please see pages -. TOLERANCES / - / / - METER +.000, , , , RADIUS +.00, , -.00

41 Carbide End Mills # FL # FL / / / -/ 00. / / / -/ / / / -/ / / / -/ 00.0 / / -/ 00. / / -/ / / -/ 00. / / -/ 0 9. / / -/ / / -/ 0.9 / / / / 0. / / -/ 00.0 / / -/ 0. / / -/ / / -/ / / 00. FOR ALUMINUM CORNER RADIUS - º HELIX - LONG - # FL RAD # FL RAD / / / -/ / / / -/ / / / -/ / / / -/ / / -/ / / -/ / / -/ / / -/ / / -/ / / -/ / / / / / / -/ / / -/ / / -/ / / -/ / / These flute roughing tools are designed specifically for high speed machining in aluminum. This tool will plunge, slot and profile in all non-ferrous materials. Our ZRN coating allows for higher speed rates and prolonged tool life and does not have an affinity for aluminum. Works well in all non-ferrous materials as well as brass and bronze applications ZRN COATED DRILL DRILL CHAMFER CHAMFER ZRN COATED END FOR ALUMINUM - LONG - SQUARE END - º HELIX For coating information see page. For technical information, please see pages -. TOLERANCES / - / / - METER +.000, , , , RADIUS +.00, ,

42 Carbide End Mills - REGULAR - SQUARE END - º HELIX END ALTIN COATED DRILL DRILL # FL # FL / / / -/. / / / -/ 9. / / /. / / / 0. / / / -/ 9. / / / -/. / / / -/ 9.0 / / / -/. / / -/ 0. / / -/ 9.0 / / -/.0 / / -/ 0. / / -/ -/. / / -/ -/ 0. / / -/ 9. / / -/ 9.0 CHAMFER CHAMFER - REGULAR - CORNER RADIUS - º HELIX ALTIN COATED # FL RAD # FL RAD / / / -/ / / / -/ / / / / / / / / / / -/ / / -/ / / / -/ / / / -/ / / -/ / / -/ / / -/ / / -/ / / -/ -/ / / -/ -/ / / -/ / / -/ These flute º tools are designed to slot and profile at higher speeds and feeds while providing a shearing action that produces excellent finishes. Works well in stainless steel and other similar alloys For coating information see page. For technical information, please see pages -. TOLERANCES / - / / - / 0 METER +.000, , , , RADIUS +.00, , -.00

43 Carbide End Mills # FL # FL / / / -/ 0. / / / -/ 0. / / / 0. / / /. / / / -/ 0 9. / / / -/. / / / -/ 09.0 / / / -/. / / -/ 0. / / -/ 9.0 / / -/ 9.0 / / -/ 9 0. / / -/ -/ 0. / / -/ -/ 0 0. / / -/. / / -/.0 - REGULAR - CORNER RADIUS - 0º HELIX # FL RAD # FL RAD / / / -/ / / / -/ / / / / / / / / / / -/ / / -/ / / / -/ / / / -/ / / -/ / / -/ / / -/ / / -/ / / -/ -/ / / -/ -/ / / -/ / / -/ These 0º tools are designed to machine all high temperature alloys. This flute high shear design geometry will slot and profile while giving excellent surface finishes. Works well in all high temperature alloys such as inconels, hastalloy, waspalloys and titanium. ALTIN COATED CHAMFER CHAMFER DRILL DRILL ALTIN COATED END - REGULAR - SQUARE END - 0º HELIX For coating information see page. For technical information, please see pages -. TOLERANCES / - / / - / METER +.000, , , , RADIUS +.00, , -.00

44 Carbide End Mills - STUB - SQUARE END - º HELIX END ALTIN COATED DRILL DRILL # FL # FL / / / -/ 99. / / / -/ / / / / / / 90 / / / 90. / / / 9.09 / / / 90. / / / 9.0 / / / 90. / / / 9..9 / / / -/ 90. / / / -/ 9 / / / -/ / / / -/ 9.0 / / / / / / 99. / / 90. / / 90. CHAMFER CHAMFER - STUB - CORNER RADIUS - º HELIX / / / -/ / # FL RAD ALTIN COATED / / -/ # FL RAD / / / / / / / / / / / / / / / / / / / / / / / / / / / -/ / / / -/ / / / -/ / / / -/ / / / / / / / / / / Designed for profiling and finishing, the flute º geometry of this tool allows it to be run 0-0% faster than conventional end mills while providing an excellent finish. Works well in all exotic materials, stainless steel, carbon steels and other similar materials. For coating information see page. For technical information, please see pages -. TOLERANCES / - / / - / METER +.000, , , , RADIUS +.00, , -.00

45 Carbide End Mills ALTIN COATED # FL # FL / / / -/ 99. / / / -/ 9 9. / / / / / / 9.. / / -/. / / / -/ 999 / / / -/ 9.9 / / / -/ 90. / / -/ 9. / / -/ 9. / / -/ 9 9. / / -/ / / -/ -/ / / -/ 9. / / -/ -/ 9 / / -/ 9 - REGULAR - CORNER RADIUS - º HELIX # FL RAD # FL RAD / / / -/ / / / -/ / / / / / / / / / -/ / / / -/ / / / -/ / / / -/ / / -/ / / -/ / / -/ / / -/ / / -/ -/ / / -/ / / -/ -/ / / -/ Designed for profiling and finishing, the flute º geometry of this tool allows it to be run 0-0% faster than conventional end mills while providing an excellent finish. Works well in all exotic materials, stainless steel, carbon steels and other similar materials. ALTIN COATED CHAMFER CHAMFER / 9 DRILL DRILL END - REGULAR - SQUARE END - º HELIX For coating information see page. For technical information, please see pages -. TOLERANCES / - / / - / METER +.000, , , , RADIUS +.00, , -.00

46 Carbide End Mills - STUB - SQUARE END - 0º HELIX END ALTIN COATED DRILL DRILL CHAMFER CHAMFER / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / 0.0 / / / / / / / / / / / / / / / -/ -/ -/ -/ -/ -/ -/ -/ -/ / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / 0.0 / / / / / / / / / / / / / / / -/ -/ -/ -/ -/ -/ -/ -/ -/ STUB - BALL NOSE - 0º HELIX ALTIN COATED / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / 0.0 / / / / / / / / / / / / / / / -/ -/ -/ -/ -/ -/ -/ -/ -/ / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / 0.0 / / / / / / / / / / / / / / / -/ -/ -/ -/ -/ -/ -/ -/ -/ For coating information see page. For technical information, please see pages, -9. TOLERANCES / - / / - METER +.000, , , , -.000

47 Carbide End Mills / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / 0.0 / / / / / / / / / / / / / / / -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / 0.0 / / / / / / / / / / / / / / / -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ STUB - BALL NOSE - 0º HELIX ALTIN COATED / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / 0.0 / / / / / / / / / / / / / / / -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / 0.0 / / / / / / / / / / / / / / / -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ DRILL DRILL CHAMFER CHAMFER ALTIN COATED END - STUB - SQUARE END - 0º HELIX For coating information see page. For technical information, please see pages, -9. TOLERANCES / - / / - METER +.000, , , , -.000

48 Carbide End Mills - REGULAR - SQUARE END - 0º HELIX END ALTIN COATED TICN COATED DRILL DRILL CHAMFER CHAMFER / / / / / / / / 9/ / / / / / / / / 9/ 9/ / / / / / / / / / 9/ / / / 9/ / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / 9/ / / / / / / / / / / / 9/ 9/ / / / / / / / / / / -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ ALTIN TICN For coating information see page. For technical information, please see pages, -9. TOLERANCES / - / / - / 9/ - METER +.000, , , , , , -.000

49 Carbide End Mills - LONG - SQUARE END - 0º HELIX END ALTIN COATED TICN COATED / / / / / / / / / / / / / / / / / / / / / / / / / / / / -/ -/ -/ -/ -/ -/ -/ -/ -/ 9 00 ALTIN TICN EXTRA LONG - SQUARE END - 0º HELIX DRILL DRILL CHAMFER CHAMFER ALTIN COATED TICN COATED / / / / / / / / / / / / / / / / / / / / / / / / / / -/ -/ -/ -/ -/ -/ -/ ALTIN TICN For coating information see page. For technical information, please see pages, -9. TOLERANCES / - / / - METER +.000, , , , -.000

50 Carbide End Mills - REGULAR - BALL NOSE - 0º HELIX END ALTIN COATED TICN COATED DRILL DRILL CHAMFER CHAMFER / / / / / / / / 9/ / / / / / / / / 9/ 9/ / / / / / / / / / 9/ / / / 9/ / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / 9/ / / / / / / / / / / / 9/ 9/ / / / / / / / / / / -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ -/ ALTIN TICN For coating information see page. For technical information, please see pages, -9. TOLERANCES / - / / - / 9/ - METER +.000, , , , , , -.000