Hone Heads. HB Type ø mm ( )
|
|
- Elvin Edwards
- 5 years ago
- Views:
Transcription
1 Hone Heads HB Type ø mm ( )
2 HB Tooling ø mm ( inch) Be diameter HONE HEADS f stock removal rate in soft steel up to 750 cm 3 /h (45.78 inch 3 /h) Machine coupling Shaft extension Length mm ( ) Part no. Hone body Masterholder / Cage Stone sets (Double length) ( ) MPS2200 f HTB f HTH and HTC (39.37 ) MPSE (62.99 ) MPSE (68.89 ) MPSE ( ) SEM ( ) SEM ( ) SEM-500 HB-76 MH-076 f roughing and finishing 2 sets are needed ø ( ) with: H50 stone series ø ( ) with: H70 stone series (without guide shoes) ( ) ( ) ( ) f HTB f HTH and HTC EA2S-SE-60 f HTS (59.05 ) SE (78.74 ) SE ( ) SE ( ) SE ( ) SE ( ) SE-572 Shaft extensions are assembled end to end f longer applications. HB-97 HB-97-UL2 with U-Lock MH-097 f roughing and finishing 2 sets are needed MH-125 (includes 2 sets MH-150 (includes 2 sets OPTIONAL: MHC-178 cage f ID mm ( ) FAST STOCK REMOVAL H70A25, A45, A45N A47, A65 E45, E45N J45, J63 NM37, NM57 DM37, DM57 FINE FINISHING H70J85, J87, J95 J97, J97XH61 XM74, XM74XH61 C05, C05XH61 NM85, NM05 DM85, DM05 These items are SUNNEN AG Switzerland parts.
3 HB Tooling ø mm ( inch) Be diameter HONE HEADS f stock removal rate in soft steel up to 750 cm 3 /h (45.78 inch 3 /h) Machine coupling Shaft extension Length mm Part no. Hone body Master holder / Cage Stone sets (Double length) ( ) ( ) ( ) ( ) ( ) ( ) ( ) ( ) ( ) ( ) ( ) f HTB f HTH and HTC EA2S-SE-60 f HTS (59.05 ) SE (78.74 ) SE ( ) SE ( ) SE ( ) SE ( ) SE ( ) SE-622 F longer applications use Base Shaft extension: ( ) SEB and add: (78.74 ) SEE ( ) SEE ( ) SEE ( ) SEE f HB-450 (Shaft extensions OD 88 mm) (78.74 ) SE ( ) SE ( ) SE ( ) SE ( ) SE ( ) SE ( ) SE Shaft extensions are assembled end to end f longer applications. HB-195 HB-195-BA with U-limiter HB-450 MHC-195-B* MHC-260-B* MHC-340-B* MHC-450-C* MHC-560-C* MHC-670-C* MHC-780-C* MHC-890-C* MHC-1000-C* MHC-1125-C* MHC-1250-C* (*includes 2 sets FAST STOCK REMOVAL H70A25, A45, A45N A47, A65 E45, E45N J45, J63 NM37, NM57 DM37, DM57 FINE FINISHING H70J85, J87, J95 J97, J97XH61 XM74, XM74XH61 C05, C05XH61 NM85, NM05 DM85, DM05 These items are SUNNEN AG Switzerland parts. When using SUNNEN AG tooling on HTB HL-Machines change gear set in MPS-100. Ordering part no. HDUF BLS.
4 Hone Heads HB SL Type ø mm ( ) Blind be tools
5 HB-SL Tooling ø mm ( inch) blind be tools Be diameter HONE HEADS f stock removal rate in soft steel up to 400 cm 3 /h (24.42 inch 3 /h) Shaft extension Machine coupling Hone body Master holder Stone sets Length mm ( ) Part no ( ) ( ) ( ) f HTB f HTH and HTC EA2S-SE-60 f HTS (59.05 ) SE (78.74 ) SE ( ) SE ( ) SE ( ) SE ( ) SE-572 Shaft extensions are assembled end to end f longer applications. HB-97-SL MH-097-SL f roughing and finishing 2 sets are needed MH-125-SL* MH-150-SL* (*includes 1 set FAST STOCK REMOVAL H70A25, A45, A45N A47, A65 E45, E45N J45, J63 NM37, NM57 DM37, DM57 FINE FINISHING H70J85, J87, J95 J97, J97XH61 XM74, XM74XH61 C05, C05XH61 NM85, NM05 DM85, DM05 These items are SUNNEN AG Switzerland parts. HB-SL Tooling ø mm ( inch) blind be tools Be diameter HONE HEADS f stock removal rate in soft steel up to 400 cm 3 /h (45.78 inch 3 /h) Shaft extension Machine coupling Hone body Master holder / Cage Stone sets Length mm ( ) Part no ( ) ( ) ( ) ( ) ( ) ( ) f HTB f HTH and HTC EA2S-SE-60 f HTS (59.05 ) SE (78.74 ) SE ( ) SE ( ) SE ( ) SE ( ) SE ( ) SE-622 F longer applications use Base Shaft extension: ( ) SEB and add: (78.74 ) SEE ( ) SEE ( ) SEE ( ) SEE HB-195-SL HB-195-SL-BA with U-limiter MHC-195-SL* MHC-260-SL* MHC-340-SL* MHC-450-SL* MHC-560-SL* MHC-670-SL* (*includes 1 set FAST STOCK REMOVAL H70A45, A45N A47, A65 E45, E45N J45, J63 NM37, NM57 DM37, DM57 FINE FINISHING H70J85, J87, J95 J97, J97XH61 XM74, XM74XH61 C05, C05XH61 NM85, NM05 DM85, DM05 These items are SUNNEN AG Switzerland parts.
6 Additional HB stone master holder set, only f MHC`s ø mm ( ) Including: 3 of MPSM1660. NOTE: Increases min. diameter of MHC by 28 mm. HB-xxx-3 3-stone version of HB hone heads All HB hone heads from ø mm ( ) are available as 3-stone version (on request). MPSM1660-SA2 Stone & Guide Suppt Set (as MPSM1660) reinfced with MPS1680 guide holder Use: 1 of MPS3148A guide set H70 (2 per set). MPSM1660-KK Stone & Guide suppt set (as MPSM1660) to clamp conventional stones with size 10 x 13 x 102 mm with MPS1680 guide holder. Use: 1 of MPS3148A guide set H70 (2 per set). MPSM1660-KH Stone & guide suppt set (as MPSM1660) to clamp conventional stones with size 1/2 x 1/2 x 4" with MPS1680 guide holder. Use: 1 of MPS3148A guide set H70 (2 per set). SA-MPSM1660 Stone & guide suppt set (as MPSM1660) to clamp superabrasive stones with size 4.75 x 6.35 x 102 mm (0.187" x 0.250" x 4"), unmounted with MPS1680 guide holder. Use: 1 of MPS3148A guide set H70 (2 per set).
7 Recommended roughing stones Material Abrasive type Abrasive code Deburring in rough bes f all materials Aluminum, Bronze Approx. surface finish (Ra) Micro meter Micro inches Conventional H70A47N, H70A49, H70XM Superabrasive Not recommended Fast stock removal in deburred, bed reamed bes Conventional H70J57, H70J Superabrasive H70DM57, H70DM87* Brass soft Conventional H70J55, H70J Carbide Superabrasive H70DM15, H70DM35, H70DMB55* Cast iron Conventional H70J45, H70J Superabrasive H70DM37, H70DM57* Ceramic, Glass Superabrasive H70DM57, H70DM87* Steel soft Stainless Steel soft Steel hardened Conventional H70A25N, H70A45, H70A45N, H70E45N Superabrasive H70NM37XM84, H70NM57* Conventional H70R25, H70R45, H70E45N, H70E Superabrasive H70NM37XM84, H70NM57* Conventional H70R25, H70R Superabrasive H70NM37XM84, H70NM57, H70NMG57* Hard chrome plating Superabrasive H70DM37, H70DM57, H70GMG37* * F superabrasive stone sets use SCBHL guide shoes (der 2 f one H70 stone set) instead of the Standard H70 guide shoes. (also MPS3148-SA01 with 4,5 mm width can be used instead of standard H70 guide shoes) Recommended finishing Stones Material Abrasive type Abrasive code Aluminum, Bronze Fine finish in previous honed bes Approx. surface finish (Ra) Micro meter Micro inches Conventional H70J87, H70J97, H70J97-XH Superabrasive H70DM97, H70DM Brass soft Conventional H70J87, H70J97, H70J97-XH Carbide Superabrasive H70DM97, H70DM Cast iron Conventional H70J87, H70J97, H70J97-XH Superabrasive H70DM97, H70DM05, H70DM Ceramic, Glass Superabrasive H70DM97, H70DM05, H70DM Steel soft Steel hardened Conventional H70J87, H70J95, H70F253-XH Conventional H70XM74-XH61, Q11-H Superabrasive H70NM05, H70NM Conventional H70J Conventional H70J85, H70E Superabrasive H70NM95, H70NM05, H70NM Hard chrome plating Conventional H70R45, H70E73, Q11-H Stones with the appendix XH61 are stone sets with stones instead of guide shoes. Order example: H70J87-XH61.
8 X-SAG-HB-HB_SL-U2
Height Master Page 343. Check Master Page 347. Calibration Tools Page 352
Calibration Instruments Height Master Page 343 Check Master Page 347 Calibration Tools Page 352 342 Digital Height Master Functions ZERO/ABS DATA/HOLD Auto Power OFF after 20 min. non use Low voltage alarm
More informationSection 12. EC Cores PHYSICAL DIMENSIONS MAGNETIC DATA
Section 12. EC s PHYSICAL DIMENSIONS NUMBER TYPE A B C & F D E S T *-43517-EC *-44119-EC *-45224-EC *-47035-EC (EC35) (EC41) (EC52) (EC70) MAGNETIC DATA in. 1.358 ±.030.681 ±.006.374 ±.012.469.8955 ±.020.108
More informationDISCONTINUED PRECISION MEASURING FOWLER CALIPERS 1 - VERNIER CALIPERS 4 - ELECTRONIC CALIPERS
FOWLER CALIPERS 1 - VERNIER CALIPERS 4 - ELECTRONIC CALIPERS 52-058-016 Fine quality vernier calipers are constructed of stainless steel. 52-057-004 offers 3-way measurement to accuracy. 52-058-XXX series
More informationmandata_us :43 Pagina 83 (1,1) FHB 82
8 FHB SERIES FHB Working pressure 4600 psi Style S Style B Style T Style D B B B B D.I. D.I. D.I. D.I. A A A A 8 Technical data Filter body ( M a t e r i a l s ) Head: Cast iron (chemical heat tre a t
More informationType M4 - SON - SO - MS
9. REV. Type M - SON - SO - MS Aircaps Tank venting and water excluding aircaps. For installation on service tank air pipes. Inerted void spaces and ballast tanks In order to maintain inert gas pressure
More information55% OFF CARBIDE HIGH SPEED STEEL COBALT. Phone: (616) Toll-Free: Fax: (616) cbdekorne.com
CARBIDE HIGH SPEED STEEL COBALT Phone: () - Toll-Free: -00--0 Fax: () - cbdekorne.com PLEASE TAKE % OFF PRINTED S END MICRO END THREAD COUNTER SINKS CHAMFER DRILL TAPS & DIES OUR COMMITMENT TO YOU...
More informationPRODUCT CATALOG
www.engman-taylor.com 0 PRODUCT CATALOG OUR COMMITMENT TO YOU... 00% MADE PREMIUM INDUSTRIAL QUALITY PRODUCTS % ORDER FULFILLMENT SAME DAY SHIPPING NO MINIMUM ORDER REQUIREMENTS EXCEPTIONAL QUALITY CONTROL
More informationD-POWER END MILLS END MILLS
0 YEDP DPOWE END S 7 9 DPOWE END S DIAMOND COATED CABIDE END S FO & COMPOSITE MATEIALS 9 HEAD OFFICE, Sewolcheonro, Bupyeonggu, Incheon, Korea PHONE : +9, FAX :+7 Http://www.yg.kr Email:yg@yg.kr Tool specifications
More informationINFRARED THERMOMETER Model : TM-959
LED target light, Emissivity adjustment INFRARED THERMOMETER Model : TM-959 Your purchase of this I N F R A R E D THERMOMETER marks a step forward for you into the field of precision measurement. Although
More information1. Based on the design and application considerations select the backshell type from the Backshell Family section in pages: 1-3
How to select a suitable Backshell? 1. Based on the design and application considerations select the backshell type from the Backshell Family section in pages: 1-3 2. Go thru the Angle/profile and Coupling
More informationWorking pressure. 320 bar. Style T. Style D. Style S. Style B B B D.I. D.I. D.I. D.I.
8 FB SERIES FB Working pressure 0 bar Style S Style B Style T Style D B B B B D.I. D.I. D.I. D.I. A A A A 8 Technical data Filter body (Materials) ead: Cast iron (chemical heat treatment) ousing: Steel
More informationJTC TOOL. 6Bore Gauge & Micro Hole Test. Dial Indicator (Option)
Holder ore Gauge & Micro Hole Test Interchangeable Rod nvil Nut Dial Indicator (Option) Holder Clamp Screw Grip Joint Guide Contact Point This is designed for measuring diameter of small holes exclusively
More informationFlow rates to 475 l/min
FMP Maximum pressure 0 bar Flow rates to 7 l/min Technical data PRSSUR FILTR Filter housing (Materials) ead: Cast iron (chemical heat treatment) ousing: Steel (chemical heat treatment) Bypass valve: Brass
More informationTHE LOSMANDY G-11 MOUNT
Checking the parts THE LOSMANDY G-11 MOUNT Depending on which accessories you ordered, your G-11 mount was shipped in four or more boxes. The contents of each box are as follows: Equatorial Mount Adjustable
More informationC-Lube Linear Way ML ML MLF
Maintenance ree & U.S. PTTD C-Lube Linear ay Variation of C-Lube Linear ay Shape Length of slide unit Model code C-Lube Linear ay is a linear motion rolling guide, incorporating the C-Lube as a components
More informationFlow rates to 750 l/min
FP Maximum pressure 0 bar Flow rates to 70 l/min Technical data Filter housing (Materials) ead: Cast iron (chemical heat treatment) ousing: Steel (chemical heat treatment) Bypass valve: AISI L (FP 0-0)
More informationPiù alto 3d flat»cc«datasheet
Datasheet LED wall / ceiling spotlight with single-sided light output. Optionally available with optics (Più) or flat with internal (Più R). Version with flat base for fitting on hollow ceiling or flush-mounted
More informationWenzhou Tripod Instrument Manufacturing Co., Ltd.
Wenzhou Tripod Instrument Manufacturing Co., Ltd. Website: http://aliyiqi.en.alibaba.com http://www.wzydyq.com/english/ Phone: 86-577-57572515 57572515 Fax: 86-577-57572516 57572516 E-mail: aliyiqi@gmail.com
More informationAbsolute encoders multiturn
elektronischer electronic multiturn, Multiturn, magnetic magnetisch Sendix M66 / M68 (shaft / hollow shaft) The Sendix M6 with Energy Harvesting Technology is an electronic multiturn encoder in miniature
More informationModel No. Size( mm ) Product Name Position Machine Model Spec. Original P/No A X A X777
F101 F102 F102T F103 F103T F104 F104T F105 F106 F107 F108 F110 F110T A290-8021-X765 0.255 O,P,Q,R,T,W A290-8021-X766 0.305 A290-8021-X767 A290-8021-X775 0.255 O,P,Q,R,T,W A290-8021-X776 0.305 A290-8021-X777
More informationTPH Series WALRUS PUMP. Multi-stage Centrifugal Pump. All specifications are subject to change without notice. 014
T Series WLRUS PUMP ll specifications are subject to change without notice. Multistage entrifugal Pump T T pplications The WLRUS T Series is horizontal multistage centrifugal pump, suitable for clean water/liquid
More informationRefer to page E-6 for details. Refer to page E-31 for details. Digital Height Master. Refer to page E-35 for details. High Precision Square
NewProducts Ultra Low xpansion Ceramic Gauge (ZRO CRA Block) Refer to page -6 for details. Gauge Block Comparator GBCD-00A Refer to page -3 for details. Digital Height Master Refer to page -35 for details.
More informationFlow rates to 750 l/min
FP Maximum pressure 0 bar Flow rates to 70 l/min Technical data Filter housing (Materials) ead: Cast iron (chemical heat treatment) ousing: Steel (chemical heat treatment) Bypass valve: AISI L (FP 00-0)
More informationO-Ring Design Guide REGISTERED QMS. ISD
O-Ring Design Guide ISO 9001 REGISTERED QMS ISD Table of Contents O-Ring Design Guide Hi-Tech Seals Inc. Compound Specifications 3 Machining Specifications 4 O-Ring -Section 4 O-Ring Gland Types 4 ID Stretch/OD
More informationExternal Micrometers. C-1
External Micrometers C-1 E X T E R N A L M I C R O M E T E R S PRECISION MEASUREMENT Precision measurement requires the use of micrometers. In 1848, the first measuring tool of this type was patented by
More informationTable of Content. Mechanical Removing Techniques. Ultrasonic Machining (USM) Sputtering and Focused Ion Beam Milling (FIB)
Table of Content Mechanical Removing Techniques Ultrasonic Machining (USM) Sputtering and Focused Ion Beam Milling (FIB) Ultrasonic Machining In ultrasonic machining (USM), also called ultrasonic grinding,
More informationCast Brass Lanterns and Indicators
Cast Brass Lanterns and Indicators Hall Lantern - Cast Brass Alloy Model P1-10 Surface antique medium Cast brass arrow indicator 264 x 130 mm outer edges polished, middle face cast raw Surface variants:
More informationbarmesapumps.com SELF-PRIMING CENTRIFUGAL TRASH PUMP SPECIFICATIONS Series: SH8-U Suction: 8" Discharge: 8" Spherical solids handling: 3"
SELF-PRIMING CENTRIFUGAL TRASH PUMP Series: SH-U Suction: " Discharge: " Spherical solids handling: 3" SIZE BEARING - PUMP END " x " NPT, lbs., female flange. Open single ball, radial load. LIQUID TEMPERATURE
More information台灣黑馬牌校正器類 CALIBRATOR METROLOGY
G1 G2 G3 Multi-functional Length Calibrator Calibration Function: All kind of caliper, micrometer, height gauge, dial indicator, bore gauge, and other measuring application. Model No. Calibration Range
More informationMaximum pressure 420 bar Flow rate to 152 l/min. 560 bar. 140 l/min. Flow rate l/min FMM 050 1/2 1,50 3/4 1,00. Δp bar 0,50 0,00 FHA 051 1,50 1,00
FMM 00 Maximum pressure 0 bar Flow rate to l/min FHA 0 Maximum pressure 60 bar Flow rate to 0 l/min Technical data FMM 00 Filter housing (Materials) Head: Cast iron (chemical heat treatment) Housing: Steel
More information6Bore Gauge & Micro Hole Test. Dial Indicator (Option)
ore Gauge & Micro Hole Test Holder Dial Indicator (Option) Holder lamp Screw Grip ore Gauge is the comparative measuring instrument which measures internal diameter of a hole by comparing with master gauge
More informationFlow rates to 485 l/min
FB Maximum pressure 0 bar Flow rates to 8 l/min Technical data Filter housing (Materials) ead: Cast iron (chemical heat treatment) ousing: Steel (chemical heat treatment) Bypass valve: Steel Check valve:
More informationFlow rates to 485 l/min
FB Maximum pressure 0 bar Flow rates to 8 l/min Technical data Filter housing (Materials) ead: Cast iron (chemical heat treatment) ousing: Steel (chemical heat treatment) Bypass valve: Steel Check valve:
More informationHigh Pressure fi lters. FHB series. Maximum working pressure up to 32 MPa (320 bar) - Flow rate up to 485 l/min
High Pressure fi lters FHB series Maximum working pressure up to MPa (0 bar) - Flow rate up to 8 l/min High Pressure fi lters Introduction FILTER SIZING INDEX CALCULATION CORRECTIVE FACTOR Page Introduction
More informationTESA MICROMASTER Electronic Micrometers with Digital Display
TESA MICROMASTER Electronic Micrometers with Digital Display DIN 86 T1 0,001 0.00005 in Metric/Inch conversion 100 : Ø 6,5 > 100 : Ø 8 With patented TESA capa µ system Measuring span of 0 or 25. Large
More informationPolígono Indutrial O Rebullón s/n Mos - España -
FB 8 Polígono Indutrial O Rebullón s/n. 646 - Mos - España - rodavigo@rodavigo.com SERIES FB Working pressure 0 bar Style S Style B Style T Style D B B B B D.I. D.I. D.I. D.I. A A A A 8 Polígono Indutrial
More informationSurface-mounting Thermostats ATH Type Series
Page 1/9 urface-mounting Thermostats ATH eries k enclosure protection IP 54 k tested to IN EN 14597 (replacing IN 3440) Brief description Thermostats control and monitor thermal processes. Instruments
More informationFlow rates to 485 l/min
FB Maximum pressure 0 bar Flow rates to 8 l/min Technical data Filter housing (Materials) ead: Cast iron (chemical heat treatment) ousing: Steel (chemical heat treatment) Bypass valve: Steel Check valve:
More informationPN LINE. PN Line. PX Line. PA Line. PU Line PX LINE. PV Line PA LINE & TUBINGS PU LINE PV LINE. Brass Push-in fittings
I NDEX PV LINE PX LINE PU LINE PA LINE & TUBINGS PN LINE Brass Push-in fittings Stainless Steel Push-in fittings Brass Standard fittings and Flexible Hoses Couplings and Multiple Connectors Function fittings
More informationExternal Micrometers. C-1
External Micrometers www.tesatechnology.com C-1 External Micrometers Precision Measurement Precision measurement requires the use of micrometers. In 1848, the first measuring tool of this type was patented
More informationFor FANUC. Wire Guide MITSUBISHI SODICK F101 FANUC MAKINO SEIBU BROTHER JAPAX CHARMILLES AGIE F102 F102T F103 F103T F104 F104T F105 F106 F107 F108
F102 A290-8021-X767 A290-8021-X775 A290-8021-X777 A290-8021-Y775 O P Q R For Big Taper A290-8021-Y777 A290-8032-X775 T A290-8021-Y765 O P Q R For Big Taper A290-8021-Y767 A290-8032-X735 T A290-8032-X765
More informationFRICTION AND THERMAL IMAGING OF TREATED BEARING MATERIALS
LETTER REPORT FRICTION AND THERMAL IMAGING OF TREATED BEARING MATERIALS Prepared by: Peter J. Blau (ORNL Contact, PI), Kevin M. Cooley and Ralph B. Dinwiddie Materials Science and Technology Division Oak
More informationTisa Enterprises. The Clamping Professionals
Flat Strap Clamp Material: Medium carbon steel, Hardened and Tempered : T1-FSC IS: - 4 D x L A B K S T1-FSC- x 0. T1-FSC- x 0. T1-FSC- x 0. T1-FSC-1 x 1 0. T1-FSC-1 x 1 M 1.00 T1-FSC-1 x 0 M 1. T1-FSC-0
More informationExternal Micrometers. C-1
External Micrometers C-1 E X T E R N A L M I C R O M E T E R S PRECISION MEASUREMENT Precision measurement requires the use of micrometers. In 1848, the first measuring tool of this type was patented by
More informationTAKE 55% OFF ALL LIST PRICES IN CATALOG!
YOUR # SOURCE FOR AMERICAN-MADE PREMIUM CUTTING TOOLS % OFF ALL S IN CATALOG! ENDMILLS MICRO ENDMILLS THREADMILLS DRILLS TAPS & DIES CHAMFER MILLS DRILL MILLS BURS COUNTERSINKS REAMERS Our commitment to
More informationCipriani Harrison Valves Corp.
Butterfly Valve pplication Stainless steel hygienic butterfly valves are used in process piping systems for isolation and control. Butterfly valves operate either manually or automatically. Working Principle
More informationBushing Part No. XTB15 XTB20 XTB25 XTB30 XTB35 XTB40 XTB45 XTB50. Wt lbs XTB60 XTB XTB80 XTB
T s STOCK T BUSHINGS Part No. Stock Bores Keyseat Key Supplied TB / *, / *, / * *, /*, /*, *, /*, /* / / / / / / x / x / TB0, /, /, /, /*, * / / / x / / / / / x / x / TB, /, /,/, /, / /,, / /* / x / /
More informationAstral Tekno Cylinders
stral Tekno Cylinders stral Tekno cylinders CYINDER SECURITY ttack Resistance High resistance to bumping or percussion thanks to the KP (ump Key Power) device. High resistance to housebreaking technique:
More informationContents. Performance Curves/Technical Data. General Data Performance Range Sectional Drawing TPH 2T TPH 4T TPH 8T TPH 12T TPH 25T TPH 50T
Contents General Data Performance Range Sectional Drawing Performance Curves/Technical Data T T T T T 8T T T T T T T 7 9 T Series Multistage Centrifugal Pump Hz Power:.. kw Head: Up to 7M Flow: Up to L/min
More informationspin tapware accessories
spin tapware accessories The Australian Designed Spin tapware range is a fusion of modern classicism. Striking the perfect balance between style, comfort and clarity, these pieces have been created to
More informationCOMMON BLACK IRON & BLADE PARTS
LT RD HD SW PP 0 PP KIT, ALL BLADE LABEL 0 LABEL, BLADE CENTER 0 0 0 0 KIT, LABEL BLACK IRON COVER, HYDRAULICS 0 KIT, COTTER () / R PIN () PLOW PACK KIT, GREASE ZERK ( PACK) CONTROLS / MODULES CONTROL
More informationThe FLUX F 430 with mechanical seal
The FLUX F 0 with mechanical seal Flexible coupling between motor and pump The pump must be used with many varying liquids, consequently the smallest residual left within the pump is unacceptable. You
More informationSL27C SL32C. ScreenLine. Technical Catalogue. english. double-glazed unit 27 mm 32 mm
VENETIAN SL27C SL32C BLIND english Technical Catalogue double-glazed unit 27 mm 32 mm dimensions technical specification SL27C SL32C System C C SL27C VENETIAN SL32C BLIND The venetian blinds SL27C and
More informationMULTISTAGE CENTRIFUGAL PUMP TPH 2/4/8/12/25/50T. 50Hz. WALRUS PUMP ISO 9001 Certified
MULTISTAGE CENTRIFUGAL PUMP TPH /////T Hz WALRUS PUMP ISO Certified TPH Applications The WALRUS TPH Series is horizontal multistage centrifugal pump, suitable for clean water/liquid without abrasive matters.
More informationNickel-Plated Brass Push-In Fittings - NPTF/INCH
/INCH Tube Connections: External /8, 5/32, /4, 5/6, 3/8, /2 Thread Connections 0-32 UNF, /8, /4, 3/8, /2 Reusable thread seal, PTFE seal ring (Teflon ) - Pro-Fit Standard - Camozzi s all metal fittings
More informationEVOTRON WET ROTOR ELECTRONIC CIRCULATORS TECHNICAL DATA APPLICATIONS ADVANTAGES
TECNICAL DATA EVOTRON Operating range: from, -, m3/h with head of up to metres. Pumped liquid temperature range: from - C to + C. Working pressure: bar ( kpa). Protection class: IP X. Insulation class:
More informationDial indicators / Dial test indicators / Center instruments Edge finders / Probes / MF measuring fixture system
Dial indicators / Dial test indicators / Center instruments Edge finders / Probes / MF measuring fixture system Accuracy of dial indicators according DIN 878 Max. permissible range () errors (µm) 0-0.4
More information3519 State Rte Corning Road. South New Berlin, Elmira, NY NY p p
WINTER CATALOG SUPERIOR QUALITY. HEADQUARTERS PO Box 527 PENNSYLVANIA OSWEGO TOOL AND STEEL S. NEW BERLIN 3519 State Rte. 8 2420 Corning Road 102 Creek Road 5183 State Rte.104 South New Berlin, Elmira,
More informationAppendix. A 1 Properties of areas.* *Symbols used are: A = area I = moment of inertia S = Section modulus
Appendix A 1 Properties of areas.* *Symbols used are: A = area I = moment of inertia S = Section modulus r = radius of gyration = I/A J = polar moment of inertia Z p = polar section modulus Circle R D
More informationMeasuring and Laying-Out Tools, Testing Instruments
Measuring and Laying-Out Tools, Testing Instruments Slide Callipers Micrometer Gauges Thread Measuring Wires Setting Gauges Multi-purpose Measuring Device 1 1.1 1.4 Gauge Blocks Gauges Gauge Ball Sets
More informationObtaining the Center of Gravity, Volume, Weight and More
C h a p t e r 10 Obtaining the Center of Gravity, Volume, Weight and More In this chapter, you will learn the following to World Class standards: The Importance of the Center of Gravity The Inquiry Toolbar
More informationIdentification Number
Identification Number The specification of Micro Linear Way LWL is specified by the identification number, which consists of a model code, a size, a part code, a preload symbol, a classification symbol,
More informationSTANDARDISED MOUNTINGS
STANDARDISED MOUNTINGS for series 449 cylinders conforming to ISO 21287 standard Series 434 MOUNTINGS CONFORMING TO ISO 21287 - ISO 15552 - AFNOR NF ISO 15552 - DIN ISO 15552 STANDARDS applications Low
More information12/25/ :27 PM. Chapter 14. Spur and Helical Gears. Mohammad Suliman Abuhaiba, Ph.D., PE
Chapter 14 Spur and Helical Gears 1 2 The Lewis Bending Equation Equation to estimate bending stress in gear teeth in which tooth form entered into the formulation: 3 The Lewis Bending Equation Assume
More informationSurTec Technical Letter SurTec 451 Chemical Deburring
SurTec Technical Letter 20 SurTec 451 Chemical Deburring Process description of chemical deburring for steel components Claudia Huchon July 2010 Chemical deburring means a fine- and superfinishing of metal
More informationTap Changer Type MHF III Specification, Assembly and Materials
Tap Changer Type MHF III Specification, ssembly and Materials Descriptions General Specifications Remarks available in one, two or three phase applications shaft length available in variable sizes connection
More informationML9000 SERIES POLARIZING MICROSCOPES FOR TRANSMITTED LIGHT MICROSCOPY
2011 Meiji Techno America ML Series Polarizing Microscopes ML9000 SERIES POLARIZING MICROSCOPES FOR TRANSMITTED LIGHT MICROSCOPY ML9000 SERIES POLARIZING MICROSCOPES WITH SLIDING ANALYZER ML9200 Polarizing
More informationMagnetic Field Characteristics of the Flat Type Electro-Magnetic Barrel Finishing Machine O. Sugiura
Key Engineering Materials Online: 2004-02-15 ISSN: 1662-9795, Vols. 257-258, pp 515-520 doi:10.4028/www.scientific.net/kem.257-258.515 2004 Trans Tech Publications, Switzerland Magnetic Field Characteristics
More informationBOLT SIZE Rec.Torque Ft/Lbs. Max Torque Ft/Lbs
BOLT SIZE Rec.Torque Ft/Lbs Max Torque Ft/Lbs "-0 5 "- "- "- 5 "- "-0 () 7 (9) (5) 5 (0) 9 () 5 () 50 () 70 (95) 00 () 5 (70) 5 (70) 5 () Material Add Suffix to P/N P09 THRU P PIPE CLAMPS FOR RIGID STEEL
More informationFMM 050 uk :26 Pagina 5 (1,1) FMM 050
uk 6-07-006 9:6 Pagina 5 (,) 30 uk 6-07-006 9:6 Pagina 5 (3,) SRIS Working pressure 80 bar Style S Style Style T Style D 3 uk 6-07-006 9:6 Pagina 7 (,) Technical data Filter body ( M a t e r i a l s )
More informationInfrared / K Thermometer Remote Temperature Measurement ( Non-Contact ) 1327K INSTRUCTION MANUAL
Infrared / K Thermometer Remote Temperature Measurement ( Non-Contact ) 1327K INSTRUCTION MANUAL TABLE OF CONTENTS TITLE PAGE INTRODUCTION...1. SAFETY INFORMATION...2. FEATURES...4. SPECIFICATIONS...4.
More informationCharacterization of Fixture-Workpiece Static Friction
Characterization of Fixture-Workpiece Static Friction By Jose F. Hurtado Shreyes N. Melkote Precision Manufacturing Research Consortium Georgia Institute of Technology Sponsors: NSF, GM R&D Center Background
More informationIdentification The specification of C-Lube Linear ay is identified by the identification, which consists of a model code, a size, a part code, a material code, a preload symbol, a classification symbol,
More informationTPH Series 50Hz Multi-stage Centrifugal Pump
WLRUS PUMP T Series Hz Multistage Centrifugal Pump ll specifications are subject to change without notice. 9 T Product data pplications Page Standard mode Page Operation conditions Page Pump construction
More informationUV LED charge control of an electrically isolated proof mass at 255 nm
UV LED charge control of an electrically isolated proof mass at 255 nm Karthik Balakrishnan Department of Aeronautics and Astronautics Hansen Experimental Physics Labs Stanford University karthikb@stanford.edu
More informationSTAINLESS STEEL MINI-CYLINDER SERIES ISO 6432 Ø mm
TN T N-YN O mm O stainless steel micro-cylinders are available in various versions with a wide range of accessories with or without magnet execution double-acting - single or through-rod gaskets: Polyurethane
More informationFAST CHECK THICKNESS GAGE
FAST CHECK THICKNESS GAGE Recommended for quick thickness checks of flat sheet materials and wide variety of small parts. Supplied with hardened steel gaging contacts, lifting levers, and clockwise continuous
More informationSerie B2.1. Flanged ductile iron ball valve. made in. Application fields. Shut-off valves E U R O P E. 18
erie B. Flanged ductile iron ball valve BRanDOni made in E U R O P E Application fields WATER CONdITIONING GA EATING INdUTRY FIRE FIGTING www.brandoni.it erie B. eries B. valves are shut-off ball valves
More informationDirect-operated 2/2-way solenoid valves Type EV210B
Data sheet Direct-operated 2/2-way solenoid valves Type EV20B EV20B covers a wide range of direct-operated 2/2-way solenoid valves for universal use. EV20B is a very robust valve program with high performance
More informationLMP 210. Style B. Style S. Maximum pressure 60 bar F l o w r a t e s t o l / m i n
LMP 0 Style S Style Maximum pressure 60 bar F l o w r a t e s t o 7 0 l / m i n 6 Technical data Filter housing (Materials) Head: luminium Housing: nodised luminium ypass valve: Nylon - Steel Pressure
More informationRESEARCH OF PROCESSED SURFACE ROUGHNESS FOR TURNING HARDENED STEEL BY MEANS OF CERAMIC CUTTING TOOLS
RESEARCH OF PROCESSED SURFACE ROUGHNESS FOR TURNING HARDENED STEEL BY MEANS OF CERAMIC CUTTING TOOLS V. P. DASIC High Technical School, R. Krstica 19, 37240 Trstenik, YUGOSLAVIA; e-mail: dasicp@ptt.yu
More informationLO-COG DC Gearmotors. Series GM8000. Series GM9000. Series GM BULLETIN LCG Series GM8000, GM9000, GM Power Your Ideas
BULLETIN LCG Series GM8, GM9, GM149 LO-COG DC Gearmotors Pittman brand LO-COG brush-commutated DC gearmotors offer smooth, quiet operation and long life. LO-COG gearmotors feature sintered steel spur gears
More informationSAVE 10% INDICATOR PROMOTION INDICATOR PROMOTION. Dial Test, Dial, Digimatic. Effective July 1, 2016 through August 31, 2016
SAVE 10% Dial Test, Dial, Digimatic Effective July 1, 2016 through August 31, 2016 Effective July 1, 2016 through August 31, 2016 SAVE 10% Quick-Set Test Indicators The most direct gear train design ever
More informationHORIZONTAL SETTING DEVICE
THE HOW TO... MANUAL HORIZONTAL SETTING DEVICE The Guide to assembling an HORIZONTAL SETTING DEVICE THANK YOU for purchasing an IT.TE.DI. product. IT.TE.DI. is an Italian state-of-the-art company which
More informationPoints. Precision Positioning Table TU. Variation. Major product specifications With flange
9 0 Precision Positioning Table Ball screw inear Points lide table with high accuracy and high rigidity in a single structure lide table Compact and slim type positioning table with an original U-shaped
More informationUniversal type Port size AS13 1F-M3. M3 x 0.5 M5 x 0.8 AS23 1F-01 AS23 1F-02 AS33 1F-02 AS33 1F-03 AS43 1F-04 R 1/8 R 1/4 R 1/4 R 3/8 R 1/2
Minimizes installation time and cost Reduces the mounting height and enables compact machinery design. Effective area is larger than the former model. Tube swivels 0 Universal type permits 0 piping swivel.
More informationSERIES FMP. Working pressure. 280 bar. Style D Style V Style Z. Style T. Style B. Style S B B D.I. D.I. D.I. D.I. D.I. D.I.
6 FMP SERIES FMP Working pressure 80 bar Style S Style Style T Style D Style V Style Z 7 Technical data Filter body (Materials) ead: Cast iron (chemical heat treatment) ousing: Cast iron (chemical heat
More informationHigh Pressure fi lters. FMP series. Maximum pressure up to 320 bar - Flow rate up to 475 l/min. High Pressure fi lters
High Pressure fi lters FMP series Maximum pressure up to 0 bar Flow rate up to 7 l/min High Pressure fi lters FILTER SIZING The correct filter sizing have to be based on the variable pressure drop depending
More informationSeries MHY2/MHW Angular Gripper. Cam actuation style is now standardized! MHZ2 MHZJ2 MHQ MHL2 MHR MHK MHS MHC2 MHT2 MHY2 MHW2 MRHQ 2.
18 Angular Gripper Cam Style Rack & Pinion Style Series / Cam actuation style is now standardized! 2.8-1 18 Angular Gripper 18 Angular Gripper Series / Cam Style Rack & Pinion Style Series / Series MHY/Cam
More informationSurface-mounting double thermostat
sales@jumo.co.uk info@jumo.us Page /0 urface-mounting ouble thermostat ATH type series Particularities! Flui expansion! Micro switch! elf-monitoring (TB/TW)! afety cut-out (TB/TW)! separate measuring an
More informationUniclass L4181. EPIC D181 CI/SfB. 11th edition
Uniclass L4181 EPIC D181 CI/SfB (31.59) Xt7 11th edition recess leather cabinet handles recess leather cabinet handles CNC machined solid brass recessed with flush fitted bonded bridle leather Custom lengths
More informationWorking pressure. 420 bar. Style T. Style B. Style D Style V Style Z. Style S B B D.I. D.I. D.I. D.I. D.I. D.I.
5 FP SRIS FP Working pressure 40 bar Style S Style Style T Style D Style V Style Z 5 Technical data Filter body (Materials) ead: Cast iron (chemical heat treatment) ousing: Steel (chemical heat treatment)
More informationThis annex is valid from: to Replaces annex dated: Location(s) where activities are performed under accreditation
Wiltonstraat 25 3905 KW Veenendaal The Netherlands Location(s) where activities are performed under accreditation Head Office Location Abbreviation/ location Main Location Wiltonstraat 25 3905 KW Veenendaal
More informationSurface-mounting thermostats Series ATH
JUMO GmbH & Co. KG Delivery address:mackenrodtstraße 14, 36039 Fulda, Germany Postal address: 36035 Fulda, Germany Phone: +49 661 6003-0 Fax: +49 661 6003-607 E-mail: mail@jumo.net Internet: www.jumo.net
More informationElectronic Indicators / Dial Gauges / Dial Test Indicators (Lever-Type)
Electronic Indicators/Dial Gauges/Dial Test Indicators (Lever-Type) Electronic Indicators / Dial Gauges / Dial Test Indicators (Lever-Type) E-1 DIN 2270 NF E 11-053 TESATAST Dial Test Indicators (Lever-Type)
More informationIR F ( C) ENGLISH INSTRUCTION MANUAL. Thermometer
INSTRUCTION MANUAL Thermometer DUAL-LASER TARGETING 12:1 DISTANCE- TO-SPOT RATIO AUTO-SCAN MAX/MIN/AVG/DIFF HIGH/LOW ALARM BACKLIT DISPLAY AUTO POWER-OFF ADJUSTABLE EMISSIVITY IR5 2m -22 752 F (-30 400
More informationC-Lube Linear Way ML Linear Way L ML LWL
-Lube Linear ay ML Linear ay L MLLL -Lube Maintenance ree Series -Lube Linear ay ML ML long term maintenance free supported! The aquamarine end plate is the symbol of maintenance free. Identification umber
More informationThe OCTANORM system components set a new standard in shop design.
O C TA N O R M S H O P S Y S T E M S. A B R I E F I N T R O D U C T I O N. The OCTANORM system components set a new standard in shop design. The wide range of aluminum profiles, the well designed accessories
More informationHigh Pressure fi lters. FHB series. Maximum pressure up to 320 bar - Flow rate up to 485 l/min. High Pressure fi lters
High Pressure fi lters FHB series Maximum pressure up to 0 bar - Flow rate up to 8 l/min 8 High Pressure fi lters FILTER SIZING The correct filter sizing have to be based on the variable pressure drop
More informationAEROSPACE DIE & MOLD MACHINE TOOL INDUSTRY MEDICAL END MILLS HIGH-PERFORMANCE CARBIDE DRILLS A PRODUCT OF KENNAMETAL INC.
AEROSPACE DIE & MOLD MACHINE TOOL INDUSTRY MEDICAL END MILLS HIGH-PERFORMANCE DRILLS A PRODUCT OF KENNAMETAL INC. INCH VERSION TOOLS Hanita Cutting Tools is recognized as one of the world's leading manufacturers
More information