U.S. Patents 6,290,217 6,244,579

Size: px
Start display at page:

Download "U.S. Patents 6,290,217 6,244,579"

Transcription

1 CR CR Series Overview U.S. Patents 6,90,7 6,,579 For the best in vibration isolation capabilities, choose Enidine s. Smaller than traditional wire ropes, these unique isolators provide cost-effective, simultaneous shock and vibration attenuation where package space is at a premium. Enidine feature an easy, single-point installation, which allows them to be installed in virtually any application. Their small size also permits the isolation of individual system components, making them ideal for use in sensitive equipment and electronics. Just as with our standard Enidine Wire Rope Isolators, Enidine feature a patented, all-metal design and components that ensure maximum reliability, regardless of temperature or substrate requirement, and that can help meet MILSPECS similar to those of our Wire Rope Isolator series. Please refer to our Compact Wire Rope Isolator Sizing Information on pages 7-8 for more information. If your application is outside the standard Compact Wire Rope Isolator product range, please consult the standard Wire Rope Isolator or HERM portions of this catalog. If a standard solution is still not available, Enidine engineers can design an isolator to suit your specifications. For further information on Enidine Wire Rope, HERM and Compact Wire Rope Isolator products, technical assistance and pricing, please contact Enidine or your nearest authorized distributor. A list of Enidine distributors can be found by visiting our website at 7 Solutions in Energy Absorption and Vibration Isolation Tel.:

2 CR Series Overview CR Crimp Mounting Hole Top Mounting Bar CR CR Bottom Mounting Bar Stainless Steel Cable Mounting Hole Stainless Steel Cable Top Mounting Bar CR CR6 Bottom Mounting Bar Tel.: Solutions in Energy Absorption and Vibration Isolation 8

3 CR CR Series Materials and Finishes: Standard: Wire Rope: 0/0 Stainless Steel Mount Bars: 606-T6 Aluminum, Chemical Conversion Coated per MIL-C-55, Class A Threads: Tapped Optional: Mount Bars: 606-T6 Aluminum, Anodized per MIL-A-865, Type II, Class 0/0 Stainless Steel per ASTM A76, Passivated Special: Isolator Options: Mounting: Consult Enidine Enidine offers a full range of mounting combinations of thru-hole, countersunk, and threaded bars. All configurations are available in either Imperial or Metric styles. Add an M after the mounting option for Metric. Some models have reduced mounting options available due to limited fastener installation space. Consult Enidine if a preferred mounting configuration is not listed. Overview Bellmouth: The bellmouth feature includes mount bars with radii manufactured into the wire rope hole edges. This option is recommended for high fatigue applications. Compact rope models (CR CR6) include this feature as the standard. Performance: Stiffness (Kv or Ks): Compact wire rope isolators exhibit non-linear stiffness behavior. Small deflections, usually associated with vibration isolation, will have a different spring rate than larger shock deflections. Enidine publishes typical vibration stiffness values (Kv), and average shock stiffness values (Ks) within the catalog. These values can be used with the provided equations listed on Page 8 to predict system performance. Isolator Axes: Compact wire rope isolators are multi-axis isolators. The diagram below includes load axis definitions and deflection considerations. COMPRESSION 5 COMPRESSION/ROLL FIXED ROLL/SHEAR Damping: Typically 5-5%, depending on size and input level. For specific damping considerations, please consult Enidine. Mounting Orientation: The diagrams below illustrate typical mounting orientations. COMPRESSION 5 COMPRESSION/ROLL FIXED ROLL/SHEAR Stabilizers: Stabilizers are used to control deflections of tall supported masses. Stabilizers are typically recommended when the height equals -times the width or depth dimension. In most applications, the quantity of stabilizers required are half as many as the base isolators, and selected one size softer than the base isolators. 9 Solutions in Energy Absorption and Vibration Isolation Tel.:

4 CR Series Application Worksheet CR APPLICATION WORKSHEET - INPUTS IMPERIAL/METRIC IMPERIAL METRIC PART I: SYSTEM DATA:. Total Supported Load ( WT): WT = lbs. WT = Kg x 9.8 = N. Number of Isolators (n): n =. Static Load per Isolator (W): W = WT n W = lbs.* W = N* * Assumes a central CG. Load Axis: Compression Load Axis Load Axis Shear or Roll 5º Compression/Roll PART II: VIBRATION SIZING:. Input Excitation Frequency (ƒi) = Hz ( = rpm ). System Response Natural Frequency for 80% isolation: ƒ n = ƒ i = Hz Maximum Isolator Vibration Stiffness: (K v ) K v = W (π ƒ n ) K v = lbs./in. K v = N/m g g = 86 in/sec or 9.8 m/sec. Select an isolator by comparing calculated values with technical data for the desired load axis provided in tables for each isolator. a.) Calculated W must be less than the isolator s max static load and b.) Isolator s vibration stiffness must be less than the calculated maximum K v PART III: SHOCK SIZING:. Maximum Allowable Transmitted Acceleration: A T = G s. Shock Input Velocity: V = in./sec. V = m/sec. Free Fall Impact: V = gh g = 86 in./sec. or 9.8 m/sec. h = Drop Height (in. or m) V. Min. Isolator Response Deflection: D min = g(a ) T D min = in. D min = m W(V/D min ). Maximum Isolator Shock Stiffness: K s = K s = lbs./in. K s = N/m g 5. Select an isolator by comparing calculated values with technical data for the desired load axis provided in tables for each isolator. a.) Calculated W must be less than the isolator s max static load and b.) Calculated D min must be less than the isolator s max deflection Note: Metric deflections are calculated in meters (m) and technical data is in millimeters (mm). and c.) Isolator s shock stiffness must be less than calculated maximum K s 6. Check actual deflection using K s from technical data K s (Isolator)g to ensure that the isolator s max deflection is D actual = D actual = in. D actual = m not exceeded. W 7. If isolator s max deflection is exceeded, select another isolator and repeat steps 5 and 6. V Tel.: Solutions in Energy Absorption and Vibration Isolation 50

5 CR CR Series.8 (9,7). (,) H ø.7 (,) Ref. (Ref) H ø.7 Note: Dimensions are in inches (mm) Tolerances are ±.00 (±.5mm) W Ref. (Ref).6.6 (,) TYP (Typ).8 (9,7).6 (6,) Height Width (Ref) Unit Weight Thru Hole Thread C sink Size Mounting H W Lbs. in. in. Imperial in. (mm) in. (mm) (Kg) Options (mm) (mm) (Metric) CR (7) 0.7 (9) 0. (,) CR (9) ± (0) 0. (,) Ø.0 #-0 UNC 8º A, B, C, D, E, S CR () (±,5) 0.9 () 0. (,) (Ø,0) (M X 0,5) (90º) CR-00.0 (6).0 (6) 0. (,) CR DM P Model Number Ordering Code Mount Bar Options: *[ ] T6 AL ALY (or Equiv.) Chem Conv. Coated [ Y ] T6 AL ALY (or Equiv.) Anodized [ P ] - 0/0 Stainless Steel (or Equiv.) Passivated Mounting Options C sink C sink Thread A B C Thru C sink Thru Add M for Metric Mounting Options: For C sink and Threaded Options See Chart Thread C sink Thru D E S Thread Thread Thru Isolator Size: See Sizing Table * Standard features. Any non-standard items may require longer lead times. Call for quotation. Maximum recommended torque for tapped aluminum bar is 0 in.-lbs. (, Nm) Wire Rope Material: Stranded 00 series stainless steel Operating Temperature Range: -50ºF to 500ºF ( -00ºC to 60ºC ) U.S. Patent 6,90,7 5 Solutions in Energy Absorption and Vibration Isolation Tel.:

6 CR Series Static Load vs. Deflection Compression CR (,) 0.5 (6,) (,9) (,9) CR (,) 0. (8,) 6 (,8) 7.0 (,) CR (,8) 0.7 (,9) 0 (,75).5 (0,6) CR (,) 0.59 (5,0) 7.5 (,). (0,9) CR 5º Compression/Roll CR (,6) 0. (8,6) (,).5 (0,79) CR (,) 0. (0,9) 8.5 (,5).5 (0,) CR (0,76) 0.58 (,7) 5.0 (0,88).5 (0,6) CR (0,9) 0.7 (8,).0 (0,5) 0.7 (0,) Shear/Roll CR (,) 0. (7,9).0 (0,70).0 (0,70) CR (0,89) 0.9 (9,9).5 (0,).5 (0,) CR (0,7) 0.5 (,).5 (0,6).5 (0,6) CR (0,5) 0.6 (6,) 0.8 (0,) 0.8 (0,) Note: Do not extrapolate plotted curves. Tel.: Solutions in Energy Absorption and Vibration Isolation 5

7 CR CR Series.8 (9,7). (,) ) H ø.6 (,6) Ref. (Ref) Note: Dimensions are in inches (mm) Tolerances are ±.00 (±.5mm) W Ref. (Ref).6.6 (,) TYP (Typ).8 (9,7).6 (6,) Height Width (Ref) Unit Weight Thru Hole Thread C sink Size Mounting H W Lbs. in. in. Imperial in. (mm) in. (mm) (Kg) Options (mm) (mm) (Metric) CR (6) 0.78 (0) 0. (,7) CR (9) ± () 0. (,0) Ø.0 #-0 UNC 8º A, B, C, D, E, S CR () (±,5) 0.9 () 0.5 (,) (Ø.0) (M X 0,5) (90º) CR (7).06 (7) 0.6 (,5) CR DM P Model Number Ordering Code Mount Bar Options: *[ ] T6 AL ALY (or Equiv.) Chem Conv. Coated [ Y ] T6 AL ALY (or Equiv.) Anodized [ P ] - 0/0 Stainless Steel (or Equiv.) Passivated Mounting Options C sink C sink Thread A B C Thru C sink Thru Add M for Metric Mounting Options: For C sink and Threaded Options See Chart Thread C sink Thru D E S Thread Thread Thru Isolator Size: See Sizing Table * Standard features. Any non-standard items may require longer lead times. Call for quotation. Maximum recommended torque for tapped aluminum bar is 0 in.-lbs. (, Nm) Wire Rope Material: Stranded 00 series stainless steel Operating Temperature Range: -50ºF to 500ºF ( -00ºC to 60ºC ) U.S. Patent 6,90,7 5 Solutions in Energy Absorption and Vibration Isolation Tel.:

8 CR Series Static Load vs. Deflection Compression CR-00.6 () 0. (5,8) 65 () 5 (6,) CR-00. (9,) 0. (8,) 50 (8,8) (,0) CR-00.5 (6,7) 0.6 (,7) 0 (5,) (,9) CR-00. (,9) 0.6 (5,7) 0 (,5) 7 (,) CR 5º Compression/Roll CR-00. (5,8) 0. (8,) 5 (6,) 6 (,8) CR-00. (,9) 0. (0,9) 0 (5,) (,9) CR (,) 0.57 (,5) 8 (,) 6 (,0) CR (,) 0.75 (9,) (,9) (0,5) Shear/Roll CR-00. (5,6) 0.9 (7,) 7 (,0) 7 (,0) CR (,0) 0.9 (9,9) 0 (,8) 0 (,8) CR (,9) 0.5 (,0) 6 (,) 6 (,) CR (,0) 0.68 (7,) (0,5) (0,5) Note: Do not extrapolate plotted curves. Tel.: Solutions in Energy Absorption and Vibration Isolation 5

9 CR CR Series.8 (9,7).50 (,7) H ø.09 ø0.9 (,) Ref. (Ref) Note: Dimensions are in inches (mm) Tolerances are ±.00 (±.5mm) W (Ref) Ref..9(,8) Typ. (Typ).8 (9,7).76 (9,) Height Width (Ref) Unit Weight Thru Hole Thread C sink Size Mounting H W Lbs. in. in. Imperial in. (mm) in. (mm) (Kg) Options (mm) (mm) (Metric) CR (9) 0.88 () 0.0 (5,7) CR () ± () 0. (6,) Ø.0 #-0 UNC 8º A, B, C, D, E, S CR (7) (±,5).06 (7) 0. (6,8) (Ø,0) (M X 0,5) (90º) CR-00.8 ().0 (0) 0.6 (7,) CR DM P Model Number Ordering Code Mount Bar Options: *[ ] T6 AL ALY (or Equiv.) Chem Conv. Coated [ Y ] T6 AL ALY (or Equiv.) Anodized [ P ] - 0/0 Stainless Steel (or Equiv.) Passivated Mounting Options C sink C sink Thread A B C Thru C sink Thru Add M for Metric Mounting Options: For C sink and Threaded Options See Chart Thread C sink Thru D E S Thread Thread Thru Isolator Size: See Sizing Table * Standard features. Any non-standard items may require longer lead times. Call for quotation. Maximum recommended torque for tapped aluminum bar is in.-lbs. (,5 Nm) Wire Rope Material: Stranded 00 series stainless steel Operating Temperature Range: -50ºF to 500ºF ( -00ºC to 60ºC ) U.S. Patent 6,90,7 55 Solutions in Energy Absorption and Vibration Isolation Tel.:

10 CR Series Static Load vs. Deflection Compression CR (9) 0.8 (7,) 5 () 68 () CR () 0. (0,) 70 () 5 (6,) CR-00.0 (8) 0.56 (,) 8 (8,) 0 (,5) CR-00.5 () 0.76 (9,) (5,8) (,9) CR 5º Compression/Roll CR-00.7 () 0.7 (9,) 80 () 0 (5,) CR-00. (0) 0.5 (,) 50 (8,8) 8 (,) CR-00.5 (6,7) 0.68 (7,) (5,8) 0 (,8) CR-00.0 (,) 0.90 (,9) 0 (,5) 5 (0,9) Shear/Roll CR-00.7 () 0. (8,) 5 (6,) 5 (6,) CR-00.9 (8,5) 0.7 (,9) 0 (,5) 0 (,5) CR-00. (6,) 0.6 (5,5) 0 (,8) 0 (,8) CR-00.0 (,) 0.8 (0,6) 6 (,) 6 (,) Note: Do not extrapolate plotted curves. Tel.: Solutions in Energy Absorption and Vibration Isolation 56

11 CR CR Series.00 (5,) H. (,0) ø.5 ø.5 (,) Ref. (Ref) Note: Dimensions are in inches (mm) Tolerances are ±.00 (±.5mm) W Ref. (Ref).7 (9,).0 (5,) Height Width (Ref) Unit Weight Thru Hole Thread C sink Size Mounting H W Lbs. in. in. Imperial in. (mm) in. (mm) (Kg) Options (mm) (mm) (Metric) CR ().87 (7). (0) CR-00.0 (5) ±.06. (5). (0) Ø.0 #0- UNF 8º A, B, C, D, E, S CR-00.7 (60) (±,5). (59).5 () (Ø7,00) (M6 X,0) (90º) CR (75).67 (68).7 (8) CR DM P Model Number Ordering Code Mount Bar Options: Add M for Metric Mounting Options: Isolator Size: *[ ] T6 AL ALY (or Equiv.) Chem Conv. Coated [ Y ] T6 AL ALY (or Equiv.) Anodized [ P ] - 0/0 Stainless Steel (or Equiv.) Passivated All Mounting Options See Chart See Sizing Table * Standard features. Any non-standard items may require longer lead times. Call for quotation. Mounting Options Thru C sink Thru A B C C sink C sink Thread Thread Thread Thru D E S Thread C sink Thru Maximum recommended torque for tapped aluminum bar is 0 in.-lbs. (7,5 Nm) Wire Rope Material: Stranded 00 series stainless steel Operating Temperature Range: -50ºF to 500ºF ( -00ºC to 60ºC ) U.S. Patent 6,, Solutions in Energy Absorption and Vibration Isolation Tel.:

12 CR Series Static Load vs. Deflection Compression CR () 0.77 (9,6) 70 () (5,8) CR-00.0 (8).7 (9,7) 5 (6,0) (,5) CR-00.0 ().(5,8) 5 (,) 9 (,6) CR-00.5 (6.7).9 (9,) (,) (0,70) CR 5º Compression/Roll CR-00.5 () 0.76 (9,) 7 (6,) 6 (,8) CR-00.5 (6,7).6 (9,5) 8 (,) 6 (,) CR-00. (5,).6 (7,) (,) (0,70) CR (,6).06 (5,) 6 (,) (0,5) Shear/Roll CR-00.9 (8,5) 0.68 (7,) (,9) (,9) CR-00.6 (7,).0 (6,) 6 (,) 6 (,) CR-00. (5,). (,) (0,70) (0,70) CR (,).85 (7,0) (0,5) (0,5) Note: Do not extrapolate plotted curves. Tel.: Solutions in Energy Absorption and Vibration Isolation 58

13 CR CR5 Series.00 (5,) H.8 (5,) ø.56 (,0) (Ref) Ref. Note: Dimensions are in inches (mm) Tolerances are ±.00 (±.5mm) W Ref. (Ref).9 (9,9).0 (5,) Height Width (Ref) Unit Weight Thru Hole Thread C sink Size Mounting H W Lbs. in. in. Imperial in. (mm) in. (mm) (Kg) Options (mm) (mm) (Metric) CR ().89 (8).6 (5) CR (5) ±.06. (5).7 (8) Ø.0 #0- UNF 8º A, B, C, D, E, S CR (60) (±,5). (59).8 (5) (Ø7,00) (M6 X,0) (90º) CR (76).6 (67).0 (57) CR5-00 -DM P Model Number Ordering Code Mount Bar Options: Add M for Metric Mounting Options: Isolator Size: *[ ] T6 AL ALY (or Equiv.) Chem Conv. Coated [ Y ] T6 AL ALY (or Equiv.) Anodized [ P ] - 0/0 Stainless Steel (or Equiv.) Passivated All Mounting Options See Chart See Sizing Table * Standard features. Any non-standard items may require longer lead times. Call for quotation. Mounting Options Thru C sink Thru A B C C sink C sink Thread Thread Thread Thru D E S Thread C sink Thru Maximum recommended torque for tapped aluminum bar is 0 in.-lbs. (7,5 Nm) Wire Rope Material: Stranded 00 series stainless steel Operating Temperature Range: -50ºF to 500ºF ( -00ºC to 60ºC ) U.S. Patent 6,, Solutions in Energy Absorption and Vibration Isolation Tel.:

14 CR5 Series Static Load vs. Deflection Compression CR (80) 0.77 (9,6) 5 () 65 () CR (8). (8,7) 60 () 5 (,) CR (7).7 (,8) 5 (7,9) 8 (,) CR (6).9 (9,) 5 (,) 8 (,) CR 5º Compression/Roll CR () 0.7 (8,) 70 () 5 (6,) CR (). (8,) 0 (5,) (,) CR (). (6,) 0 (,6) 8 (,) CR (6,7). (5,8) (,9) (0,70) Shear/Roll CR (0) 0.65 (6,5) 5 (,) 5 (,) CR ().0 (5,7) (,) (,) CR ().8 (,5) 8 (,) 8 (,) CR (6,7).9 (8,5) (0,70) (0,70) Note: Do not extrapolate plotted curves. Tel.: Solutions in Energy Absorption and Vibration Isolation 60

15 CR CR6 Series.00 (5,) H. (5,8) ø.88 (,8) (Ref) Ref. Note: Dimensions are in inches (mm) Tolerances are ±.00 (±.5mm) W Ref. (Ref).0 (0,).0 (5,) Height Width (Ref) Unit Weight Thru Hole Thread C sink Size Mounting H W Lbs. in. in. Imperial in. (mm) in. (mm) (Kg) Options (mm) (mm) (Metric) CR (7). (5).0 (57) CR (55) ±.06. (59). (6) Ø.0 #0- UNF 8º A, B, C, D, E, S CR (6) (±,5).50 (6). (65) (Ø7,00) (M6 X,0) (90º) CR (79).86 (7).6 (7) CR6-00 -DM P Model Number Ordering Code Mount Bar Options: Add M for Metric Mounting Options: Isolator Size: *[ ] T6 AL ALY (or Equiv.) Chem Conv. Coated [ Y ] T6 AL ALY (or Equiv.) Anodized [ P ] - 0/0 Stainless Steel (or Equiv.) Passivated All Mounting Options See Chart See Sizing Table * Standard features. Any non-standard items may require longer lead times. Call for quotation. Mounting Options Thru C sink Thru A B C C sink C sink Thread Thread Thread Thru D E S Thread C sink Thru Maximum recommended torque for tapped aluminum bar is 0 in.-lbs. (7,5 Nm) Wire Rope Material: Stranded 00 series stainless steel Operating Temperature Range: -50ºF to 500ºF ( -00ºC to 60ºC ) U.S. Patent 6,,579 6 Solutions in Energy Absorption and Vibration Isolation Tel.:

16 CR6 Series Static Load vs. Deflection Compression CR6-00 () 0.87 (,) 80 () 90 (6) CR6-00 (9).6 (9,5) 5 (0) 55 (9,6) CR (67).8 (7.6) 85 (5) 0 (5,) CR (6).0 (5,6) 5 (7,9) 5 (,6) CR 5º Compression/Roll CR (0) 0.9 (,9) 90 (6) 5 (7,9) CR (). (0,5) 55 (9,6) 0 (5,) CR ().5 (8,) 5 (7,9) 6 (,8) CR (). (5,) 0 (,5) 7 (,) Shear/Roll CR (0) 0.8 (0,6) 5 (7,9) 5 (7,9) CR ().08 (7,) 5 (,) 5 (,) CR ().5 (,) 5 (,6) 5 (,6) CR (6).89 (8,0) 9 (,6) 9 (,6) Note: Do not extrapolate plotted curves. Tel.: Solutions in Energy Absorption and Vibration Isolation 6

Bulletin No. CCA/94. CCA Series Circular Arch Isolators. A New Concept in Shock & Vibration Control

Bulletin No. CCA/94. CCA Series Circular Arch Isolators. A New Concept in Shock & Vibration Control Bulletin No. CCA/94 CCA Series Circular Arch Isolators A New Concept in Shock & Vibration Control The CCA Series Circular Arch Isolators... CCA-2 CCA-4 CCA-8 Developed from a unique family of Shock and

More information

WIRE ROPE MOUNT SILENTFLEX

WIRE ROPE MOUNT SILENTFLEX WIRE ROPE MOUNT SILENTFLEX Axial natural frequency Shear natural frequency to 1 Hz - Hz DESCRIPTION The helical cable isolators Silentflex are completely made in metal: manufactured with a stainless steel

More information

Coating K = TFE wear resist, dry lubricant Kerkote X = Special coating, (Example: Kerkote with grease)

Coating K = TFE wear resist, dry lubricant Kerkote X = Special coating, (Example: Kerkote with grease) HAYD: 0 WGS0 Low Profile, Screw Driven Slide WGS0 Linear Rail with Hybrid 000 Series Size Single and Double Stacks and 000 Series Size Single and Double Stacks Kerk Motorized WGS Linear Slide utilizes

More information

DIM. A (+ 0,05 0,51) .135 ±.015 (3,43 ± 0,38) COMMON LUG INTEGRAL ASSEMBLY NUT, DO NOT REMOVE 1/4-32 UNEF-2A THREAD

DIM. A (+ 0,05 0,51) .135 ±.015 (3,43 ± 0,38) COMMON LUG INTEGRAL ASSEMBLY NUT, DO NOT REMOVE 1/4-32 UNEF-2A THREAD Multi-Deck SERIES 0 SERIES 0 0." Diameter, / Amp, Standard, Military SR FEATURES Proven Quality in Thousands of Applications Gold-plated Contact System 0,,, 0 and 0 Angle Options MIL Qualified Versions

More information

The LAT Electronics consists of five distinct box assemblies as follows:

The LAT Electronics consists of five distinct box assemblies as follows: I. SYNOPSIS The preliminary stress analyses for the DAQ Electronics assemblies have been performed per the conditions specified in the Environmental Specification LAT-SS-00778. The analysis considered

More information

1. Based on the design and application considerations select the backshell type from the Backshell Family section in pages: 1-3

1. Based on the design and application considerations select the backshell type from the Backshell Family section in pages: 1-3 How to select a suitable Backshell? 1. Based on the design and application considerations select the backshell type from the Backshell Family section in pages: 1-3 2. Go thru the Angle/profile and Coupling

More information

MODEL NAME : LLDMWW0-15K*0*A

MODEL NAME : LLDMWW0-15K*0*A Eagle Eye (Outdoor LED Module) Application Note MODEL NAME : LLDMWW0-15K*0*A RoHS Compliant HALOGEN FREE (30)-4022 1 / 16 CONTENTS 1. Product Description 3/16 2. Specifications 2.1. Chromaticity Bins for

More information

Load Cells. 3/2 Introduction. 3/3 Mounting components 3/3 Introduction

Load Cells. 3/2 Introduction. 3/3 Mounting components 3/3 Introduction Siemens AG 2018 /2 Introduction / Mounting components / Introduction /4 Single point load cells /4 Overview /5 SIWAREX WL260 SP-S AA /5 - Load cell /6 SIWAREX WL260 SP-S AB /6 - Load cell /7 SIWAREX WL260

More information

Ball Reverser. Ball Reverser Actuator. FLENNOR Power Transmission Products. Patented

Ball Reverser. Ball Reverser Actuator. FLENNOR Power Transmission Products. Patented Ball Reverser FLENNOR Power Transmission Products Ball Reverser Actuator Patented Ball Reverser Principle General Information NORCO'S Ball Reverser Actuator is a unique actuator which provides automatic

More information

Series 7500 Formed Metal Bellows Catalog 974C

Series 7500 Formed Metal Bellows Catalog 974C Series 00 Formed Metal Bellows Catalog C Innovators of the industry Bellows assemblies for safety valves, control valves, and regulators. When you look for a formed bellows which is reliable, has a long

More information

Identification Number

Identification Number Identification Number The specification of Micro Linear Way LWL is specified by the identification number, which consists of a model code, a size, a part code, a preload symbol, a classification symbol,

More information

CLIPPER SCREEN SIZES - DECEMBER 28, 2005

CLIPPER SCREEN SIZES - DECEMBER 28, 2005 PERFORATED METAL ROUND HOLE FRACTIONS HOLE SIZE HOLE SIZE IN HOLE SIZE TOLERANCE STANDARD OR ( INCH ) IN 64TH THOUSANDS IN MM THOUSAND ADD ON PRICE 1/25 2.56.040 1.01 + 0 -.003 STANDARD 1/24 2.67.041 1.05

More information

THREE HOLE SPLICE CLEVIS FOR B52 Standard finishes: ZN, GRN Wt./C 126 Lbs. (57.1 kg)

THREE HOLE SPLICE CLEVIS FOR B52 Standard finishes: ZN, GRN Wt./C 126 Lbs. (57.1 kg) CLEVIS FITTINGS B169 TWO HOLE SPLICE Wt./C 84 Lbs. (38.1 kg) B168 THREE HOLE SPLICE Wt./C 126 Lbs. (57.1 kg) B167 Wt./C 178 Lbs. (80.7 kg) 3 1 /2 (88.9) B170 TWO HOLE SPLICE Wt./C 123 Lbs. (55.8 kg) 5

More information

Lecture Slides. Chapter 14. Spur and Helical Gears

Lecture Slides. Chapter 14. Spur and Helical Gears Lecture Slides Chapter 14 Spur and Helical Gears The McGraw-Hill Companies 2012 Chapter Outline Cantilever Beam Model of Bending Stress in Gear Tooth Fig. 14 1 Lewis Equation Lewis Equation Lewis Form

More information

T1 T e c h n i c a l S e c t i o n

T1 T e c h n i c a l S e c t i o n 1.5 Principles of Noise Reduction A good vibration isolation system is reducing vibration transmission through structures and thus, radiation of these vibration into air, thereby reducing noise. There

More information

LO-COG DC Gearmotors. Series GM8000. Series GM9000. Series GM BULLETIN LCG Series GM8000, GM9000, GM Power Your Ideas

LO-COG DC Gearmotors. Series GM8000. Series GM9000. Series GM BULLETIN LCG Series GM8000, GM9000, GM Power Your Ideas BULLETIN LCG Series GM8, GM9, GM149 LO-COG DC Gearmotors Pittman brand LO-COG brush-commutated DC gearmotors offer smooth, quiet operation and long life. LO-COG gearmotors feature sintered steel spur gears

More information

Power Resistor for Mounting onto a Heatsink Thick Film Technology

Power Resistor for Mounting onto a Heatsink Thick Film Technology Power Resistor for Mounting onto a Heatsink Thick Film Technology FEATURES LPS high power: 1100 W Wide resistance range: 1 to 1.3 k E24 series Non inductive Easy mounting Low thermal radiation of the case

More information

Identification system for short product names. Changes/amendments at a glance. 2 Bosch Rexroth AG OBB omega modules R ( )

Identification system for short product names. Changes/amendments at a glance. 2 Bosch Rexroth AG OBB omega modules R ( ) Omega Modules OBB 2 OBB omega modules R9990079 (206-05) Identification system for short product names Short product name Example: O B B - 085 - N N - System = Omega module Guideway = Ball Rail System Drive

More information

AC Synchronous Motors

AC Synchronous Motors AC Synchronous Motors A C S Y N C H R O N O U S M O T O R S AC Synchronous Motors Kollmorgen AC synchronous motors are high pole count motors that naturally turn at slower speeds (72 or 60 rpm). at 72

More information

Product description. Compact Modules. Characteristic features. Further highlights

Product description. Compact Modules. Characteristic features. Further highlights 4 Compact Modules Product description Characteristic features Five fine-tuned sizes based on a compact precision aluminum profile with two integrated pre-tensioned ball rail systems Identical external

More information

Power Resistor for Mounting onto a Heatsink Thick Film Technology

Power Resistor for Mounting onto a Heatsink Thick Film Technology DIMENSIONS in millimeters Power Resistor for Mounting onto a Heatsink Thick Film Technology FEATURES LPS high power: 1 W Wide resistance range: 1 Ω to 1.3 kω E24 series Non inductive Easy mounting Low

More information

DEVELOPMENT OF SEISMIC ISOLATION TABLE COMPOSED OF AN X-Y TABLE AND WIRE ROPE ISOLATORS

DEVELOPMENT OF SEISMIC ISOLATION TABLE COMPOSED OF AN X-Y TABLE AND WIRE ROPE ISOLATORS DEVELOPMENT OF SEISMIC ISOLATION TABLE COMPOSED OF AN X-Y TABLE AND WIRE ROPE ISOLATORS 7 Hirokazu SHIMODA, Norio NAGAI, Haruo SHIMOSAKA And Kenichiro OHMATA 4 SUMMARY In this study, a new type of isolation

More information

Power Resistor for Mounting onto a Heatsink Thick Film Technology

Power Resistor for Mounting onto a Heatsink Thick Film Technology Power Resistor for Mounting onto a Heatsink Thick Film Technology DESIGN SUPPORT TOOLS click logo to get started FEATURES 300 W at 85 C bottom case temperature Wide resistance range: 0.3 to 900 k E24 series

More information

Power Resistor for Mounting onto a Heatsink Thick Film Technology

Power Resistor for Mounting onto a Heatsink Thick Film Technology DIMENSIONS in millimeters Power Resistor for Mounting onto a Heatsink Thick Film Technology FEATURES LPS high power: 1 W Wide resistance range: 1 Ω to 1.3 kω E24 series Non inductive Easy mounting Low

More information

OPTI 521, Optomechanical Design, Technical Paper Reviews, Dr. Jim Burge, 2011

OPTI 521, Optomechanical Design, Technical Paper Reviews, Dr. Jim Burge, 2011 Synopsis of Predicting the vibration characteristics of elements incorporating Incompressible and Compressible Viscoelastic Materials Abstract Jacob Etter OPTI 521, University of Arizona, College of Optical

More information

PRODUCT DATA SHEET. Eagle Eye Outdoor LED Module 3000K. RoHS Compliant. CUSTOMER :. DATE : REV : Rev. 1.0.

PRODUCT DATA SHEET. Eagle Eye Outdoor LED Module 3000K. RoHS Compliant. CUSTOMER :. DATE : REV : Rev. 1.0. CUSTOMER :. DATE : 213. 3. 29. REV : Rev. 1.. PRODUCT DATA SHEET Eagle Eye Outdoor LED Module 3K MODEL NAME : LLDMWW-15K21A (Type II Lens - H:16 V:7 ) LLDMWW-15K22A (Type III Lens - H:135 V:6 ) LLDMWW-15K23A

More information

REDUX WAVE SPRINGS. When Size Does Matter. Now with Metric Sizes. Europe s no 1 spring company

REDUX WAVE SPRINGS. When Size Does Matter. Now with Metric Sizes.  Europe s no 1 spring company REDUX WAVE SPRINGS When Size Does Matter Now with Metric Sizes Europe s no 1 spring company Order by telephone on 0118 978 1800 www.leespring.co.uk Ask us about free delivery ISO 9001 BUREAU VERITAS Certification

More information

Power Resistor for Mounting onto a Heatsink Thick Film Technology

Power Resistor for Mounting onto a Heatsink Thick Film Technology DIMENSIONS in millimeters Power Resistor for Mounting onto a Heatsink Thick Film Technology FEATURES 800 W at 85 C bottom case temperature Wide resistance range: 0.3 Ω to 900 kω E24 series Non inductive

More information

Note that W is the skin surface weight density in units of psf. An equivalent graph in terms of metric units is given in Appendix A.

Note that W is the skin surface weight density in units of psf. An equivalent graph in terms of metric units is given in Appendix A. VIBRATION RESPONSE OF A CYLINDRICAL SKIN TO ACOUSTIC PRESSURE VIA THE FRANKEN METHOD Revision H By Tom Irvine Email: tomirvine@aol.com September 16, 2008 Introduction The front end of a typical rocket

More information

AE / AER Series. AER Series

AE / AER Series. AER Series AE / AER Series Characteristic Highlights True helical gear design Precision helical gearing increases tooth to tooth contact ratio by over % vs spur gearing. The helix angle produces smooth and quiet

More information

LECTURE 12. STEADY-STATE RESPONSE DUE TO ROTATING IMBALANCE

LECTURE 12. STEADY-STATE RESPONSE DUE TO ROTATING IMBALANCE LECTURE 12. STEADY-STATE RESPONSE DUE TO ROTATING IMBALANCE Figure 3.18 (a) Imbalanced motor with mass supported by a housing mass m, (b) Freebody diagram for, The product is called the imbalance vector.

More information

Specification FAT801-S

Specification FAT801-S Specification FAT801-S SSC Customer Drawn Approval Approval 100415 100415 FAT801-S 1. Features 2. Absolute Maximum Ratings 3. Electro Characteristics 4. Optical characteristics 5. Reliability 6. Color

More information

Ball screw. Linear. Coupling cover. 1Positioning table of a structure with enhanced sealing property. 3 High corrosion resistance

Ball screw. Linear. Coupling cover. 1Positioning table of a structure with enhanced sealing property. 3 High corrosion resistance Cleanroom Precision Positioning Table TC Ball screw TC EB Slide table inear Way Side cover Stainless sheet Motor bracket inear Coupling cover Pipe threads for suction connector Points ight weight, low

More information

Power Resistor for Mounting onto a Heatsink Thick Film Technology

Power Resistor for Mounting onto a Heatsink Thick Film Technology DIMENSIONS in millimeters Power Resistor for Mounting onto a Heatsink Thick Film Technology FEATURES 300 W at 85 C bottom case temperature Wide resistance range: 0.3 Ω to 900 kω E24 series Non inductive

More information

Design against fluctuating load

Design against fluctuating load Design against fluctuating load In many applications, the force acting on the spring is not constants but varies in magnitude with time. The valve springs of automotive engine subjected to millions of

More information

Edward C. Robison, PE, SE. 02 January Architectural Metal Works ATTN: Sean Wentworth th ST Emeryville, CA 94608

Edward C. Robison, PE, SE. 02 January Architectural Metal Works ATTN: Sean Wentworth th ST Emeryville, CA 94608 Edward C. Robison, PE, SE ks ATTN: Sean Wentworth 1483 67 th ST Emeryville, CA 94608 02 January 2013 SUBJ: 501 CORTE MADERA AVE, CORTE MADERA, CA 94925 BALCONY GUARD BASE PLATE MOUNTS The guards for the

More information

D : SOLID MECHANICS. Q. 1 Q. 9 carry one mark each.

D : SOLID MECHANICS. Q. 1 Q. 9 carry one mark each. GTE 2016 Q. 1 Q. 9 carry one mark each. D : SOLID MECHNICS Q.1 single degree of freedom vibrating system has mass of 5 kg, stiffness of 500 N/m and damping coefficient of 100 N-s/m. To make the system

More information

Design/Analysis of Isolation System for the Oceaneering Space Systems Cargo Transport Container

Design/Analysis of Isolation System for the Oceaneering Space Systems Cargo Transport Container Design/Analysis of Isolation System for the Oceaneering Space Systems Cargo Transport Container Arya Majed, Ph.D. Applied Structural Dynamics, Inc. www.appliedstructuraldynamics.com ASD-TB-2-27 Updated:1/1/22

More information

PRODUCT DATA SHEET. Eagle Eye Outdoor LED Module 5700K. RoHS Compliant. CUSTOMER :. DATE : REV : Rev. 2.0.

PRODUCT DATA SHEET. Eagle Eye Outdoor LED Module 5700K. RoHS Compliant. CUSTOMER :. DATE : REV : Rev. 2.0. CUSTOMER :. DATE : 213. 4. 23. REV : Rev. 2.. PRODUCT DATA SHEET Eagle Eye Outdoor LED Module 57K MODEL NAME : LLDMWW-15K71A (Type II Lens - H:16 V:7 ) LLDMWW-15K72A (Type III Lens - H:135 V:6 ) LLDMWW-15K73A

More information

all stainless steel transducer multimedia compatibility

all stainless steel transducer multimedia compatibility all stainless steel transducer multimedia compatibility High-Performance Silicon technology LARGE INVENTORY Fast Shipment! 0-0.07 to 0-690 bar 100 mv, 0 to 5 V, and 4 to 20 ma Outputs U 1, 2 & 5 psi Low

More information

I-FORCE Ironless linear motors

I-FORCE Ironless linear motors I-FORCE Ironless linear motors Parker Trilogy s I-Force ironless linear motors offer high forces and rapid accelerations in a compact package. With forces ranging from 5.5 lbf (24.5 N) - 197.5 lbf (878.6

More information

APEX DYNAMICS, INC. Staianless

APEX DYNAMICS, INC. Staianless APEX DYNAMICS, INC. HIGH PRECISION PLANETARY GEARBOXES AE / AER Series Staianless High precision high speed planetary gearboxes AE / AER series Apex Dynamics, Inc. is the world s most productive manufacturer

More information

Linear measuring technology

Linear measuring technology Their extremely robust construction, their high IP69k protection level and their wide temperature range make these new draw wire encoders particularly reliable and durable. Their flexibility and adaptability

More information

Power Resistor Thick Film Technology

Power Resistor Thick Film Technology Power Resistor Thick Film Technology LTO series are the extension of RTO types. We used the direct ceramic mounting design (no metal tab) of our RCH power resistors applied to semiconductor packages. FEATURES

More information

PACKAGING DYNAMICS #1 of 5 Overview and Definition of Terms

PACKAGING DYNAMICS #1 of 5 Overview and Definition of Terms PACKAGING DYNAMICS #1 of 5 Overview and Definition of Terms Herb Schueneman President & CEO Presenter Edmund Tang Laboratory Manager Presenter January 2015 Background What is Packaging Dynamics? The term

More information

Variable Speed 20" Single and Multi-spindle, Belt Drive Industrial Drill Presses

Variable Speed 20 Single and Multi-spindle, Belt Drive Industrial Drill Presses www.clausing-industrial.com Variable Speed 20" Single and Multi-spindle, Belt Drive Industrial Drill Presses Two Speed Variable Speeds 150-2000rpm Variable Speeds 200-1300rpm Variable Speeds 300-2000rpm

More information

Pressure transmitters for industrial applications MBS 32 and MBS 33

Pressure transmitters for industrial applications MBS 32 and MBS 33 Data sheet Pressure transmitters for industrial applications MBS 32 and MBS 33 The standard pressure transmitters MBS 32 and MBS 33 are designed for use in almost all industrial applications, and offer

More information

Temperature measurement

Temperature measurement Temperature measurement 19 2 Example of connections of particular elements Temperature display units BGK85 (page 31) Option Computer, control, itp. Temperature measurement TFC TFL (page 23) (page 23) Temperature

More information

Chapter 5. Vibration Analysis. Workbench - Mechanical Introduction ANSYS, Inc. Proprietary 2009 ANSYS, Inc. All rights reserved.

Chapter 5. Vibration Analysis. Workbench - Mechanical Introduction ANSYS, Inc. Proprietary 2009 ANSYS, Inc. All rights reserved. Workbench - Mechanical Introduction 12.0 Chapter 5 Vibration Analysis 5-1 Chapter Overview In this chapter, performing free vibration analyses in Simulation will be covered. In Simulation, performing a

More information

Vishay Dale Wirewound Resistors, Military, MIL-PRF Qualified, Type RE, Aluminum Housed, Chassis Mount FEATURES RESISTANCE RANGE 18546

Vishay Dale Wirewound Resistors, Military, MIL-PRF Qualified, Type RE, Aluminum Housed, Chassis Mount FEATURES RESISTANCE RANGE 18546 RH, NH FETURES Molded construction for total environmental protection omplete welded construction Meets applicable requirements of MIL-PRF-18546 vailable in non-inductive styles (type NH) with ryton- Perry

More information

Linear guide drives. Synchronous shafts The use of synchronous shafts enables several linear axes to be operated with one drive.

Linear guide drives. Synchronous shafts The use of synchronous shafts enables several linear axes to be operated with one drive. Linear guide drives Drive concept The linear guides are driven via the hollow shaft in the drive head. The drive head is used to directly install a motor or alternatively (in connection with a center shaft)

More information

411 Steel Couplings. 411 Steel Couplings--Standard Length Sleeves 1/2 thru 12 Steel Pipe Sizes. Sleeve Thk. X Lgth. In.

411 Steel Couplings. 411 Steel Couplings--Standard Length Sleeves 1/2 thru 12 Steel Pipe Sizes. Sleeve Thk. X Lgth. In. Steel Couplings 0/0 Steel Couplings--Standard Length s 1/ thru Steel Pipe Sizes Nom. Pipe Size 1/ / 1 1 1 1/ Pipe.0 1.0 1. 1. 1.90.00.... Buna-N Gasket -000001-00 -00001-00 -00011-00 -00001-00 -00019001-00

More information

MEMS Project 2 Assignment. Design of a Shaft to Transmit Torque Between Two Pulleys

MEMS Project 2 Assignment. Design of a Shaft to Transmit Torque Between Two Pulleys MEMS 029 Project 2 Assignment Design of a Shaft to Transmit Torque Between Two Pulleys Date: February 5, 206 Instructor: Dr. Stephen Ludwick Product Definition Shafts are incredibly important in order

More information

T20WN. Data Sheet. Torque transducers. Special features. Installation example with bellows couplings. B en

T20WN. Data Sheet. Torque transducers. Special features. Installation example with bellows couplings. B en T20WN Torque transducers Data Sheet Special features - Nominal (rated) torques 0.1 N m, 0.2 N m, 0. N m, 1 N m, 2 N m, N m, 10 N m, 20 N m, 0 N m, 100 N m, 200 N m - Accuracy class: 0.2 - Contactless transmission

More information

K04 TYPE -40 C +85 C 20000H

K04 TYPE -40 C +85 C 20000H K04 TYPE -40 C +85 C 20000H Extended life. Surge-proof capacitor in aluminium can with insulation sleeve. To be mounted with ring clips or with threaded stud. Designed for high resistances to voltage spikes.

More information

3M Twisted Pair, Flat Cable,.050" 28 AWG Stranded, Halogen Free Polyolefin, 2100/20TP, 30m

3M Twisted Pair, Flat Cable,.050 28 AWG Stranded, Halogen Free Polyolefin, 2100/20TP, 30m 3M Worldwide : United States : Electronics Manufacturing Product Catalog for Electronic Specialty Markets 3M Cable & Assemblies Internal Wiring Twisted Pair Flat Cable, Mass Terminatable,.050 in Pitch,

More information

The basic dynamic load rating C is a statistical number and it is based on 90% of the bearings surviving 50 km of travel carrying the full load.

The basic dynamic load rating C is a statistical number and it is based on 90% of the bearings surviving 50 km of travel carrying the full load. Technical data Load Rating & Life Under normal conditions, the linear rail system can be damaged by metal fatigue as the result of repeated stress. The repeated stress causes flaking of the raceways and

More information

Cree XLamp CMA1825 LED

Cree XLamp CMA1825 LED Cree XLamp CMA1825 LED Product family data sheet CLD-DS160 Rev 0A Product Description Cree s XLamp High Current LED Array family is optimized for best in class lumen output, efficacy and reliability at

More information

Vacuum capacitors overview Capacitor selection guides

Vacuum capacitors overview Capacitor selection guides JENNINGS TECHNOLOGY Vacuum capacitors overview Capacitor selection guides Capacitors by type Capacitor type Vacuum variable Capacity max. (pf) Test voltage / Hz Model no. series Page number 7.,, 1 CVDD-

More information

CV3000 Series. Characterized Insert Control Valves

CV3000 Series. Characterized Insert Control Valves CV3000 Series Characterized Insert Control Valves The CV3000 Series is a v-type control valve for precise control allowing high pressure drop capability with straight-through flow and bubble-tight shut

More information

Telescope Mechanical Design

Telescope Mechanical Design Telescope Mechanical Design Albert Lin The Aerospace Corporation (310) 336-1023 albert.y.lin@aero.org 6/27/06 6/27/06 Telescope Mechanical Design 1 Overview Design Overview Instrument Requirements Mechanical

More information

Absolute encoders multiturn

Absolute encoders multiturn elektronischer electronic multiturn, Multiturn, magnetic magnetisch Sendix M66 / M68 (shaft / hollow shaft) The Sendix M6 with Energy Harvesting Technology is an electronic multiturn encoder in miniature

More information

Tension zone applications, i.e., cable trays and strut, pipe supports, fire sprinklers Seismic and wind loading

Tension zone applications, i.e., cable trays and strut, pipe supports, fire sprinklers Seismic and wind loading General Information Mechanical Anchors General Information Power-Stud + SD1 Wedge Expansion Anchor Product Description The Power-Stud+ SD1 anchor is a fully threaded, torque-controlled, wedge expansion

More information

DRAWING ISO 200 REV. "R" TYP TYP SLOT OPTIONAL .130 TYP KNURL STYLE - MFG. OPTION

DRAWING ISO 200 REV. R TYP TYP SLOT OPTIONAL .130 TYP KNURL STYLE - MFG. OPTION .500 SHELL I.D. 0.39.135 F T TOP ENTRY H J K SLOT OPTIONAL E END ENTRY G.062.062 0.49 P.130 KNURL STYLE - MFG. OPTION R S M DIMENSIONS PART # P N CABLE ENTRY ISO - 100 0.36 0.37 02 THRU 33 ISO - 200 0.57

More information

Improving the Accuracy of Dynamic Vibration Fatigue Simulation

Improving the Accuracy of Dynamic Vibration Fatigue Simulation Improving the Accuracy of Dynamic Vibration Fatigue Simulation Kurt Munson HBM Prenscia Agenda 2 1. Introduction 2. Dynamics and the frequency response function (FRF) 3. Using finite element analysis (FEA)

More information

1.3 Working temperature T 200,0 1.4 Working environment. F... Guided seating. Light service. Cold formed springs. Music wire ASTM A228

1.3 Working temperature T 200,0 1.4 Working environment. F... Guided seating. Light service. Cold formed springs. Music wire ASTM A228 Helical cylindrical compression spring of round wires and bars i ii? 1.0 Calculation without errors. Project information Input parameters section Selection of load conditions, spring operational and production

More information

Dynamic Analysis on Vibration Isolation of Hypersonic Vehicle Internal Systems

Dynamic Analysis on Vibration Isolation of Hypersonic Vehicle Internal Systems International Journal of Engineering Research and Technology. ISSN 0974-3154 Volume 6, Number 1 (2013), pp. 55-60 International Research Publication House http://www.irphouse.com Dynamic Analysis on Vibration

More information

Relative pressure transmitter type 520

Relative pressure transmitter type 520 Relative pressure transmitter type 520 Pressure range The compact type 520 pressure transmitter is based upon the Huba Control developed thick film technology where the pressure measuring cell is fully

More information

BOLT SIZE Rec.Torque Ft/Lbs. Max Torque Ft/Lbs

BOLT SIZE Rec.Torque Ft/Lbs. Max Torque Ft/Lbs BOLT SIZE Rec.Torque Ft/Lbs Max Torque Ft/Lbs "-0 5 "- "- "- 5 "- "-0 () 7 (9) (5) 5 (0) 9 () 5 () 50 () 70 (95) 00 () 5 (70) 5 (70) 5 () Material Add Suffix to P/N P09 THRU P PIPE CLAMPS FOR RIGID STEEL

More information

ROTARY MOTION CONTROL

ROTARY MOTION CONTROL ROTARY MOTION CONTROL Technical Data Sheet Nexen Mechanical Torque Limiter Family PMT / PMK / PMC 2TC 2CC ECC PCC Mechanical Torque Limiter The trend in industry is to design and incorporate more automation

More information

RGS08 Linear Rails: RGS08 Non-Motorized With and Without Guide Screw. RGS08 Non-Motorized Linear Rails

RGS08 Linear Rails: RGS08 Non-Motorized With and Without Guide Screw. RGS08 Non-Motorized Linear Rails RGS08 RGS08 Non-Motorized With and Without Guide RGS08 Non-Motorized Linear Rails RG Series linear rails are available: RGS08 Non-Motorized, -driven linear rail RGS08 Non-Motorized linear rail without

More information

Rotary modules.

Rotary modules. Rotary modules www.comoso.com www.comoso.com Rotary modules ROTARY MODULES Series Size Page Rotary modules RM swivel unit 156 RM 08 160 RM 10 162 RM 12 164 RM 15 168 RM 21 172 RM rotor 176 RM 50 180 RM

More information

Maximum pressure 420 bar Flow rate to 152 l/min. 560 bar. 140 l/min. Flow rate l/min FMM 050 1/2 1,50 3/4 1,00. Δp bar 0,50 0,00 FHA 051 1,50 1,00

Maximum pressure 420 bar Flow rate to 152 l/min. 560 bar. 140 l/min. Flow rate l/min FMM 050 1/2 1,50 3/4 1,00. Δp bar 0,50 0,00 FHA 051 1,50 1,00 FMM 00 Maximum pressure 0 bar Flow rate to l/min FHA 0 Maximum pressure 60 bar Flow rate to 0 l/min Technical data FMM 00 Filter housing (Materials) Head: Cast iron (chemical heat treatment) Housing: Steel

More information

WW25R ±1%, ±5%, 2W Metal plate low ohm power chip resistors Size 2512 (6432)

WW25R ±1%, ±5%, 2W Metal plate low ohm power chip resistors Size 2512 (6432) WW25R ±1%, ±5%, 2W Metal plate low ohm power chip resistors Size 2512 (6432) Current Sensing Type Automotive AEC Q200 compliant *Contents in this sheet are subject to change without prior notice. Page

More information

Gurley Model A58 Absolute Encoder

Gurley Model A58 Absolute Encoder Gurley Model Absolute Encoder Motion Type: Rotary Usage Grade: Industrial Output: Absolute Resolution: - Bit The model encoder is a single-turn absolute rotary encoder with opto-electronic technology This

More information

WW25Q ±1%, ±5%, 1W Metal plate low ohm power chip resistors Size 2512 (6432)

WW25Q ±1%, ±5%, 1W Metal plate low ohm power chip resistors Size 2512 (6432) WW25Q ±1%, ±5%, 1W Metal plate low ohm power chip resistors Size 2512 (6432) Current Sensing Type Automotive AEC Q200 compliant *Contents in this sheet are subject to change without prior notice. Page

More information

LECTURE NOTES ENT345 MECHANICAL COMPONENTS DESIGN Lecture 6, 7 29/10/2015 SPUR AND HELICAL GEARS

LECTURE NOTES ENT345 MECHANICAL COMPONENTS DESIGN Lecture 6, 7 29/10/2015 SPUR AND HELICAL GEARS LECTURE NOTES ENT345 MECHANICAL COMPONENTS DESIGN Lecture 6, 7 29/10/2015 SPUR AND HELICAL GEARS Dr. HAFTIRMAN MECHANICAL ENGINEEERING PROGRAM SCHOOL OF MECHATRONIC ENGINEERING UniMAP COPYRIGHT RESERVED

More information

Q. 1 Q. 5 carry one mark each.

Q. 1 Q. 5 carry one mark each. General ptitude G Set-8 Q. 1 Q. 5 carry one mark each. Q.1 The chairman requested the aggrieved shareholders to him. () bare with () bore with (C) bear with (D) bare Q.2 Identify the correct spelling out

More information

RGS06 Linear Rails: RGS06 Non-Motorized With and Without Guide Screw. RGS06 Non-Motorized Linear Rails

RGS06 Linear Rails: RGS06 Non-Motorized With and Without Guide Screw. RGS06 Non-Motorized Linear Rails on-motorized With and Without Guide on-motorized Linear Rails RG Series linear rails are available: on-motorized, -driven linear rail on-motorized, Wide format, -driven linear rail on-motorized, Wide format,

More information

Single point load cells

Single point load cells SP4M Single point load cells Special features Maximum capacities: kg 200 kg Aluminum High ratio of minimum verification Offcenter load compensation Shielded connection cable Explosion protection and other

More information

APEX DYNAMICS, INC. Staianless

APEX DYNAMICS, INC. Staianless APE DYNAMICS, INC. HIGH PRECISION HIGH SPEED PLANETARY GEARBOES AF / AFR Series Staianless High precision high speed planetary gearboxes AF / AFR series Apex Dynamics, Inc. is the world s most productive

More information

Prob. 1 SDOF Structure subjected to Ground Shaking

Prob. 1 SDOF Structure subjected to Ground Shaking Prob. 1 SDOF Structure subjected to Ground Shaking What is the maximum relative displacement and the amplitude of the total displacement of a SDOF structure subjected to ground shaking? magnitude of ground

More information

Impact. m k. Natural Period of Vibration τ. Static load Gray area Impact load t > 3 τ. Absorbing energy. Carrying loads

Impact. m k. Natural Period of Vibration τ. Static load Gray area Impact load t > 3 τ. Absorbing energy. Carrying loads Impact also called shock, sudden or impulsive loading driving a nail with a hammer, automobile collisions. dashpot a) Rapidly moving vehicles crossing a bridge To distinguish: b) Suddenly applied c) Direct

More information

General characteristics

General characteristics General characteristics This range of insulators and partition bushings provides for connecting and supporting low- and medium-voltage electrical equipment. - Their purpose is to provide electrical and

More information

Type M4 - SON - SO - MS

Type M4 - SON - SO - MS 9. REV. Type M - SON - SO - MS Aircaps Tank venting and water excluding aircaps. For installation on service tank air pipes. Inerted void spaces and ballast tanks In order to maintain inert gas pressure

More information

214'-7" Hook Height L1 114'-10" 22,025# Version "A" (With TSK 212 Section) HOOK HEIGHT ft/m TOWER TYPE TS TSK 212

214'-7 Hook Height L1 114'-10 22,025# Version A (With TSK 212 Section) HOOK HEIGHT ft/m TOWER TYPE TS TSK 212 PEINER SK 415 Hammerhead Tower Crane 22,025 44,050 lbs. (10 20 t) Lifting Capacity* SPECIFICATIONS C-L of hook to end of Jib 4'-10" (2) PART 33'-2" 7'-7" (4) PART BG 73'-2" TSK 214'-7" Height L1 114'-10"

More information

Power Resistor Thick Film Technology

Power Resistor Thick Film Technology Power Resistor Thick Film Technology DESIGN SUPPORT TOOLS click logo to get started FEATURES 50 W at 25 C case temperature heatsink mounted Direct mounting ceramic on heatsink Broad resistance range: 0.010

More information

Identification The of -Lube Linear Roller Way Super MX is identified by the identification, which consists of model code, size, part code, material symbol preload symbol, classification symbol, interchangeable

More information

Nickel-Plated Brass Push-In Fittings - NPTF/INCH

Nickel-Plated Brass Push-In Fittings - NPTF/INCH /INCH Tube Connections: External /8, 5/32, /4, 5/6, 3/8, /2 Thread Connections 0-32 UNF, /8, /4, 3/8, /2 Reusable thread seal, PTFE seal ring (Teflon ) - Pro-Fit Standard - Camozzi s all metal fittings

More information

Bettis RGS F-Series. Quarter-Turn Spring-Return (SR) and Double-Acting (DA) Pneumatic Actuators. Product Data Sheet RGS Rev.

Bettis RGS F-Series. Quarter-Turn Spring-Return (SR) and Double-Acting (DA) Pneumatic Actuators. Product Data Sheet RGS Rev. Bettis RGS F-Series Quarter-Turn Spring-Return (SR) and Double-Acting (DA) Pneumatic Actuators Output Torques to 500,000 in-lb (56,492 N m) Ductile Iron or Stainless-Steel Construction Temperatures from

More information

Cam Roller Guides. The Drive and Control Company. Service Automation. Electric Drives and Controls. Linear Motion and Assembly Technologies

Cam Roller Guides. The Drive and Control Company. Service Automation. Electric Drives and Controls. Linear Motion and Assembly Technologies Industrial Hydraulics Electric Drives and Controls Linear Motion and Assembly Technologies Pneumatics Service Automation Mobile Hydraulics Cam Roller Guides The Drive and Control Company Linear Motion

More information

6 INCH W X 5-3/4 INCH D X 8-3/8 INCH H

6 INCH W X 5-3/4 INCH D X 8-3/8 INCH H 0 South Street -, TX Nacogdoches Phone: -- Fax: -0- S0N0AN.KVA PH 0/V /V Buck Boost Transformer Eaton Corp Catalog Number S0N0AN Manufacturer Eaton Corp Description Buck Boost Transformer, Power Rating

More information

NR ROTARY RING TABLE: FLEXIBLE IN EVERY RESPECT

NR ROTARY RING TABLE: FLEXIBLE IN EVERY RESPECT NR FREELY PROGRAMMABLE ROTARY TABLES NR ROTARY RING TABLE All NR rings allow customer-specific drive motors to be connected NR ROTARY RING TABLE: FLEXIBLE IN EVERY RESPECT WHEN IT S GOT TO BE EXACT We

More information

CDS. high density spring connection

CDS. high density spring connection CDS high density spring connection DENSTY STANDARD 1A CDS DENSTY A A spring connection CDS Series The originality of multipole connectors represents one of the core values of LE, a leading company in this

More information

Universal type Port size AS13 1F-M3. M3 x 0.5 M5 x 0.8 AS23 1F-01 AS23 1F-02 AS33 1F-02 AS33 1F-03 AS43 1F-04 R 1/8 R 1/4 R 1/4 R 3/8 R 1/2

Universal type Port size AS13 1F-M3. M3 x 0.5 M5 x 0.8 AS23 1F-01 AS23 1F-02 AS33 1F-02 AS33 1F-03 AS43 1F-04 R 1/8 R 1/4 R 1/4 R 3/8 R 1/2 Minimizes installation time and cost Reduces the mounting height and enables compact machinery design. Effective area is larger than the former model. Tube swivels 0 Universal type permits 0 piping swivel.

More information

FOUR-POINT CONTACT SLEWING RINGS - without gear [ O ]

FOUR-POINT CONTACT SLEWING RINGS - without gear [ O ] FOUR-POINT CONTACT SLEWING RINGS - without gear [ O ] Number of the Loading Boundary Dimensions Static Ax.Basic Load Rating Designation Weight Abutment Dimensions Curve d D T C oa G J 1 J 2 N 1 N 2 n 1

More information

30 W Power Resistor Thick Film Technology

30 W Power Resistor Thick Film Technology 30 W Power Resistor Thick Film Technology LTO series are the extension of RTO types. We used the direct ceramic mounting design (no metal tab) of our RCH power resistors applied to semiconductor packages.

More information

C-Lube Linear Way ML Linear Way L ML LWL

C-Lube Linear Way ML Linear Way L ML LWL -Lube Linear ay ML Linear ay L MLLL -Lube Maintenance ree Series -Lube Linear ay ML ML long term maintenance free supported! The aquamarine end plate is the symbol of maintenance free. Identification umber

More information

DS 300. Electronic Pressure Switch. with IO-Link interface. Stainless Steel Sensor. accuracy according to IEC 60770: 0.35 % FSO.

DS 300. Electronic Pressure Switch. with IO-Link interface. Stainless Steel Sensor. accuracy according to IEC 60770: 0.35 % FSO. DS 00 Electronic Pressure Switch with IO-Link interface Stainless Steel Sensor accuracy according to IEC 60770: 0.5 % FSO Nominal pressure from 0... 00 mbar up to 0... 600 bar Digital output signal IO-Link

More information