GUHROSync Synchro tapping chucks THE BEST OF BOTH SYSTEMS GUHRING - YOUR WORLD-WIDE PARTNER
|
|
- Coleen Bishop
- 5 years ago
- Views:
Transcription
1 THE BEST OF BOTH SYSTEMS THE ADVANTAGES OF HYDRAULIC CHUCKS & SYNCHRO TAPPING CHUCKS IN ONE TOOL HOLDER GUHROSync Synchro tapping chucks GUHRING - YOUR WORLD-WIDE PARTNER
2 GUHROSYNC THE EASY WAY TO THE PERFECT THREAD Metalic spring axial suspension Torsional damper Hydraulic chuck Polymer ring axial damping Reduction sleeve Intelligent design: As well as the suspension and damping elements in the slender GUHROSync chucks ( the reduction of axial and radial ces during the tapping process) there is also room the delivery set MQL or conventional cooling lubrication and the length setting screw.
3 Mz [Ncm] Messzyklus Nr.: 1 Mittelwert = Min = Max = Integral = The optimal combination of long-life metal spring and polymer damping elements considerably reduces axial and radial ces Glätten ein Mz [Ncm] 3000 Fz [N] Fy [N] 1500 Fx [N] Messzyklus Nr.: 1 Zeit [s] Fz [N] Messzyklus Nr.: 1 Mittelwert = Min = 5.8 Max =669.6 Integral = Fy [N] Messzyklus Nr.: 1 Mittelwert =3.33 Min = Max = Integral = 194. Fx [N] Messzyklus Nr.: 1 Mittelwert = Min = Max =4.09 Integral = Ncm Rigid chuck 000 N Glätten ein Mz [Ncm] Fz [N] Fy [N] Fx [N] Ncm -000 Messzyklus Nr.: 1 Zeit [s] Mz [Ncm] Messzyklus Nr.: 1 Mittelwert =1013. Min = Max = Integral = Fz [N] Messzyklus Nr.: 1 Mittelwert = Min = 0.63 Max =81.36 Integral = Fy [N] Messzyklus Nr.: 1 Mittelwert =-0.31 Min = Max =14.97 Integral = Fx [N] Messzyklus Nr.: 1 Mittelwert =6.98 Min = Max =31.58 Integral = 4.6 GUHROSync 500 N IMPROVED TOOL LIFE IMPROVED THREAD QUALITY GREATER PROCESS RELIABILITY Made visible: The spring symbol on the GUHROSync displays the effect of axial and radial ce.
4 REDUCTION OF AXIAL AND RADIAL FORCES COMPENSATES SYNCHRONIZATION ERRORS QUICK AND ACCURATE LENGTH SETTING OF TOOLS MODULAR DESIGN FOR DIFFERENT STANDARD AND SPECIAL VERSIONS LONGER TOOL LIFE REDUCED CYCLE TIMES IMPROVED THREAD QUALITY GREATER PROCESS RELIABILITY 4 Synchro tapping chucks
5 Content GUHROSync synchro tapping chucks internal cooling Guh.no. Page Configuration of GUHROSync synchro tapping chucks internal cooling hydraulic synchro tapping chucks with internal cooling ISO taper hydraulic synchro tapping chucks with internal cooling MAS/BT hydraulic synchro tapping chucks with internal cooling Straight shank hydraulic synchro tapping chucks internal cooling adaptors tapping chucks CAT shrink fit holder CAT side lock holder extra short Sealed reduction sleeves hydraulic synchro tapping chucks GUHROJET reduction sleeves hydraulic synchro tapping chucks Setting screws synchro tapping chucks with conventional internal cooling 18 GUHROSync synchro tapping chucks MQL Guh.no. Page Configuration of GUHROSync synchro tapping chucks MQL MQL 1-channel hydraulic synchro tapping chucks ( auto. tool change) MQL -channel hydraulic synchro tapping chucks ( auto. tool change) 4604 MQL hydraulic synchro tapping chucks ( manual tool change) MQL hydraulic synchro tapping chucks with internal cooling MQL setting screws with internal cone MQL synchro tapping chucks MQL 1-channel coolant delivery set MQL -channel coolant delivery set MQL coolant delivery set (filler) 7 Synchro tapping chucks 5
6 Configuration of GUHROSync synchro tapping chucks with straight shank internal cooling Side lock holders ISO taper BT taper CAT taper Shrink fit chucks HSK-C CAT taper Hydraulic synchro tapping chucks with increased clamping ce MAS-BT HSK-C ISO taper Hydraulic synchro tapping chucks Hydraulic synchro tapping chucks 416 CAT taper ISO taper 4577 Hydraulic synchro tapping chucks MAS-BT 455 Type B Hydraulic synchro tapping chucks with cylindrical shank Ø 5, DIN 1835-B+E, internal cooling 455 Type A Hydraulic synchro tapping chucks with cylindrical shank Ø 0, DIN 1835-A, internal cooling 4364 Setting screws synchro tapping chucks, with conventional int. cooling Sealed reduction sleeve GUHROJET reduction sleeve Threading tool: shank diameter x square 6 Synchro tapping chucks
7 hydraulic synchro tapping chucks with internal cooling Product inmation optimal tool life and compression direction balances very small pitch differences between synchro spindle and tap the cutting cycle to a minimum reduction sleeves with active drive readjustment conventional cooling Guhring no. 491 adjustment screws Guhring no separately Guhring no or 4606 separately delivery set Guhring no separately GÜHROJET shank Ø x VKT thread tension/ compr. ± Guhring no kg Code no. EDP M3-M M8-M M3-M M8-M Synchro tapping chucks 7
8 ISO taper hydraulic synchro tapping chucks with internal cooling Product inmation SK30 to DIN ISO 7388 m AD without coolant supply over collar SK40 to DIN ISO 7388 m AD/AF m B supplied with threaded pins in bores optimal tool life and compression direction balances very small pitch differences between synchro spindle and tap the cutting cycle to a minimum reduction sleeves with active drive readjustment conventional cooling Guhring no. 491 adjustment screws Guhring no separately Guhring no or 4606 separately 496 separately SK ISO shank Ø thread tension/ compr. ± Guhring no GÜHROJET kg Code no. EDP M3-M M8-M M3-M M8-M Synchro tapping chucks
9 MAS/BT hydraulic synchro tapping chucks with internal cooling Product inmation without coolant supply over collar MAS/BT40 to JIS B m JD/JF (m AD/B) m B supplied with threaded pins in bores optimal tool life and compression direction balances very small pitch differences between synchro spindle and tap the cutting cycle to a minimum reduction sleeves with active drive readjustment conventional cooling Guhring no. 491 adjustment screws Guhring no separately Guhring no or 4606 separately 498 separately BT BT shank Ø thread tension/ compr. ± Guhring no GÜHROJET kg Code no. EDP M3-M M8-M M3-M M8-M Synchro tapping chucks 9
10 Straight shank hydraulic synchro tapping chucks internal cooling Product inmation optimal life and compression direction balances very small pitch differences between synchro spindle and tap the cutting cycle to a minimum reduction sleeves with active drive readjustment holding in precision chucks holding in side lock holders conventional cooling Guhring no. 491 adjustment screws Guhring no separately Guhring no or 4606 separately type A h6 type shank Ø thread type B tension/ compr. ± Guhring no. 455 GÜHROJET kg Code no. EDP A.8-10 M3-M A 6-16 M8-M B.8-10 M3-M B 6-16 M8-M Synchro tapping chucks
11 adaptors tapping chucks Product inmation tapping chucks with straight shank 5 code no. 1, separately d d1 d3 Guhring no kg Code no EDP Synchro tapping chucks 11
12 CAT shrink fit holder Product inmation flange (plugged with threaded pins when supplied) with axial ce dampening perfect runout accuracy l 0,003 A 10 4 o 30 CAT M6 A CAT shank Ø h6 l incl. setting screw Guh. no. Code no. Guhring no kg Code no. EDP Synchro tapping chucks
13 CAT side lock holder extra short Product inmation CAT CAT clamping-ø Guhring no kg Code no. EDP Synchro tapping chucks 13
14 Sealed reduction sleeves hydraulic synchro tapping chucks Product inmation GUHROSync synchro tapping chucks ** readjustment Guhring no separately Guhring no separately * l 3 ** l 3 Standard inch inch l l 3 * adjustment screw Guhring no thread Code no. EDP DIN M / M DIN M3 / M4.5 / M JIS M DIN M4 / M ANSI & JIS M JIS M ANSI & JIS M DIN M4.5 / M5 / M6 / M JIS M7 / M ANSI /4-0 & 1/ DIN / JIS M7 / M9 / M ANSI / DIN M8 / M JIS M ANSI /16-18 & 5/ ANSI /16-14 & 7/ JIS M DIN M9 / M ANSI /-13 & 1/ ANSI /8-16 & 3/ DIN M Synchro tapping chucks
15 Sealed reduction sleeves hydraulic synchro tapping chucks Product inmation GUHROSync synchro tapping chucks ** readjustment Guhring no separately Guhring no separately * l 3 ** l 3 Standard inch inch l l 3 adjustment screw Guhring no thread Code no. EDP JIS M DIN M4.5/M5/M6/M JIS M7 / M ANSI /4-0 & 1/ DIN / JIS M7 / M9 / M ANSI / DIN M8 / M JIS M ANSI /16-18 & 5/ ANSI /16-14 & 7/ JIS M DIN M9 / M ANSI /-13 & 1/ ANSI /8-16 & 3/ DIN M JIS M ANSI /16-1 & 9/ DIN M DIN M1 / M ANSI /8-11 & 5/ JIS M JIS M DIN / JIS M ANSI / ANSI /4-10 & 3/ JIS M DIN M * Synchro tapping chucks 15
16 GUHROJET reduction sleeves hydraulic synchro tapping chucks Product inmation clamping taps with square shank in GUHROSync synchro tapping chucks clamping-ø tool shank tolerance h6-h9 positive drive of reduction sleeve in Guhrosync synchro chuck with coolant slots peripheral cooling, theree process and tool life improvement coiled swarf is consistently washed away position setting screw on tap shank length-setting screw allows 3 ** readjustment order MQL setting screws Guhring no separately order setting screw Guhring no separately * l l 3 Standard inch 3 ** inch l l 3 adjustment screw Guhring no GÜHROJET thread Code no. EDP DIN M / M DIN M3 / M4.5 / M ANSI to JIS M ANSI & DIN M4 / M ANSI & JIS M JIS M ANSI & JIS M DIN M4.5 / M5 / M6 / M JIS M7 / M ANSI /4-0 & 1/ DIN / JIS M7 / M9 / M ANSI / DIN M8 / M JIS M ANSI /16-18 & 5/ ANSI /16-14 & 7/ JIS M DIN M9 / M ANSI /-13 & 1/ ANSI /8-16 & 3/ DIN M * 16 Synchro tapping chucks
17 GUHROJET reduction sleeves hydraulic synchro tapping chucks Product inmation clamping taps with square shank in GUHROSync synchro tapping chucks clamping-ø tool shank tolerance h6-h9 positive drive of reduction sleeve in Guhrosync synchro chuck with coolant slots peripheral cooling, theree process and tool life improvement coiled swarf is consistently washed away position setting screw on tap shank length-setting screw allows 3 ** readjustment order MQL setting screws Guhring no separately order setting screw Guhring no separately * l l 3 Standard inch inch 3 ** l l 3 adjustment screw Guhring no GÜHROJET thread Code no. EDP JIS M DIN M4.5/M5/M6/M JIS M7 / M ANSI /4-0 & 1/ DIN / JIS M7 / M9 / M ANSI / DIN M8 / M JIS M ANSI /16-18 & 5/ ANSI /16-14 & 7/ JIS M DIN M9 / M ANSI /-13 & 1/ ANSI /8-16 & 3/ DIN M JIS M ANSI /16-1 & 9/ DIN M DIN M1 / M ANSI /8-11 & 5/ JIS M JIS M DIN / JIS M ANSI / ANSI /4-10 & 3/ JIS M DIN M * Synchro tapping chucks 17
18 Setting screws synchro tapping chucks with conventional internal cooling Product inmation Guhring no. 4601, 4576, 4577, 455 readjustment G G O-ring O-ring tap shank-ø x G Guhring no O-ring image Code no. EDP ER0 / Hydro1 < Ø6 M8x x ER0 / Hydro1 6x4.9 M8x x ER0 / Hydro1 7x5.5 M8x x ER0 / Hydro1 8x6. M8x x ER0 / Hydro1 9x7 M8x x ER0 / Hydro1 10x8 M8x x ER0 / Hydro1 11x9 M8x x ER3 / Hydro0 < Ø6 M10x x ER3 / Hydro0 6x4.9 M10x x ER3 / Hydro0 7x5.5 M10x x ER3 / Hydro0 8x6. M10x x ER3 / Hydro0 9x7 M10x x ER3 / Hydro0 10x8 M10x x ER3 / Hydro0 11x9 & 1x9 M10x x ER3 / Hydro0 14x11 M10x x ER3 / Hydro0 16x1 M10x x ER3 / Hydro0 18x14.5 & 0x16 M10x x Synchro tapping chucks
19 Guhring Innovative machining As one of the pioneers of MQL technology we have an extensive knowlege of minimal quantity lubrication. Higher cutting speeds and longer tool life are possible thanks to adapted cooling as well as highest surface qualities thanks to the pure lubricant. Workpieces and chips remain dry! Save the cost of de-greasing your workpieces as well as disposal of swarf and soluble oil.
20 Configuration of GUHROSync tapping chucks internal cooling with MQL MQL coolant delivery set single channel MQL coolant delivery set channel systems MQL coolant delivery set (filler) 1 MQL shrink fit chucks auto. tool change man. tool change 1 MQL hydraulic tapping chucks auto. tool change man. tool change MQL hydraulic synchro tapping chucks single channel auto. tool change MQL hydraulic synchro tapping chucks channel systems auto. tool change MQL hydraulic synchro tapping chucks man. tool change MQL hydraulic synchro tapping chuck with internal coolant cylindrical shank Ø MQL setting screws with internal cone MQL synchro tapping chucks 4605 Reduction sleeves, sealed 4606 GUHROJET reduction sleeves Threading tool with MQL shank: shank diameter x square 0 Synchro tapping chucks
21 MQL hydraulic synchro tapping chucks single channel systems and automatic tool change Product inmation optimal tool life and compression direction balances very small pitch differences between synchro spindle and tap the cutting cycle to a minimum reduction sleeves with active drive readjustment colored polymer ring Guhring no. 491 automatic tool change Guhring no MQL adjustment screws Guhring no separately or 4606 separately 1 GÜHROSync shank-ø thread tension/ compr. ± Guhring no. 460 kg Code no. EDP M3-M M8-M M3-M M8-M Synchro tapping chucks 1
22 MQL hydraulic synchro tapping chucks channel systems and automatic tool change Product inmation optimal tool life and compression direction balances very small pitch differences between synchro spindle and tap the cutting cycle to a minimum reduction sleeves with active drive readjustment colored polymer ring Guhring no. 491 automatic tool change Guhring no screws Guhring no separately or 4606 separately GÜHROSync shank-ø thread tension/ compr. ± Guhring no kg Code no. EDP M3-M M8-M M3-M M8-M Synchro tapping chucks
23 MQL hydraulic synchro tapping chucks manual tool change Product inmation optimal tool life and compression direction balances very small pitch differences between synchro spindle and tap the cutting cycle to a minimum reduction sleeves with active drive readjustment colored polymer ring Guhring no. 491 manual tool change (filler) Guhring no MQL adjustment screws Guhring no separately or 4606 separately 1 GÜHROSync shank-ø thread tension/ compr. ± Guhring no kg Code no. EDP M3-M M8-M M3-M M8-M Synchro tapping chucks 3
24 MQL hydraulic synchro tapping chucks with internal cooling Product inmation optimal tool life and compression direction balances very small pitch differences between synchro spindle and tap the cutting cycle to a minimum reduction sleeves with active drive readjustment precision chucks (hydraulic, shrink fit or power clamping chucks) colored polymer ring Guhring no. 491 MQL adjustment screws Guhring no separately Guhring no or 4606 separately 1 h6 shank-ø thread tension/ compr. ± Guhring no. 454 GÜHROSync kg Code no. EDP M3-M M8-M Synchro tapping chucks
25 MQL setting screws with internal cone MQL synchro tapping chucks. Product inmation Guhring no. 460, 4603 an604 readjustment 90 o G 90 o G 1 O-ring O-ring tap shank-ø x G Guhring no O-ring image Code no. EDP ER0 / Hydro1 6x4.9 M8x x ER0 / Hydro1 7x5.5 M8x x ER0 / Hydro1 8x6. M8x x ER0 / Hydro1 9x7 M8x x ER0 / Hydro1 10x8 M8x x ER0 / Hydro1 11x9 M8x x ER3 / Hydro0 6x4.9 M10x x ER3 / Hydro0 7x5.5 M10x x ER3 / Hydro0 8x6. M10x x ER3 / Hydro0 9x7 M10x x ER3 / Hydro0 10x8 M10x x ER3 / Hydro0 11x9 & 1x9 M10x x ER3 / Hydro0 14x11 M10x x ER3 / Hydro0 16x1 M10x x ER3 / Hydro0 18x14.5 & 0x16 M10x x Synchro tapping chucks 5
26 MQL coolant delivery set single channel Product inmation clamping and based on installed condition G G l M10x M1x M16x M18x M0x M4x l Guhring no G Code no. EDP MQL coolant delivery set channel systems Product inmation neck design and based on installed condition l l 3 l Guhring no M10x M1x M16x M18x M0x M4x l 3 G Code no. EDP 6 Synchro tapping chucks
27 MQL coolant delivery set (filler) Product inmation systems and based on installed condition G l 1 l Guhring no G Code no. EDP M10x M1x M16x M16x M18x M18x M0x M0x M4x M4x Synchro tapping chucks 7
28 DRILLING TAPPING/THREAD- MILLING/FLUTELESS TAPPING MILLING REAMING PCD/PCBN SPECIAL TOOLING SOLUTIONS COUNTERSINKING/ DE-BURRING MODULAR TOOLING SYSTEMS TOOL RECONDITIONING SERVICE Guhring, Inc. Main Office P.O. Box 643, Brookfield, WI Shipping Address 1445 Coerce Avenue Brookfield, WI Tel (6) (800) Fax (6) West Coast Distribution Center and Reconditioning Facility Computer Ln. Huntington Beach, CA 9649 Reconditioning Facility 11 W. Dudley Town Rd. Bloomfield, CT 0600 Manufacturing and Reconditioning Facility 9550 W.K. Smith Rd. Suite B New Hudson, MI Guhring Corporation 0 Steckle Place, Unit #14 Kitchener, ON NE C3 Tel (519) (800) Fax (519)
Coromant Capto Short Adapter
Coromant Capto Short Adapter The quick change system for reduced setup and production time. Faster return on investment. Short Adapter Short Adapter More available cutting tool length Short toolholder
More informationMetal core drills the most cost-effective drilling experience.
Metal core drilling Metal core drills the most cost-effective drilling experience. Core drilling is an extremely efficient process: faster, quieter and more accurate than twist drilling. And since core
More informationSTANDARD & OPTION 1 X, Y, Z axis linear scale 2 Saddle slideway cover 3 Table slideway cover 4 Table Splash guard 5 Working light 6 Coolant circulatio
STANDARD & OPTION X, Y, Z axis linear scale 2 Saddle slideway cover 3 Table slideway cover Table Splash guard 5 Working light 6 Coolant circulation system 7 8 ITEM Bolts & leveling pads for installation
More informationAF SERIES AWEA MECHANTRONIC CO., LTD. High Performance Vertical Machining Center AGENT ISO 9001 ISO 14001
AWEA MECHANTRONIC CO., LTD. HEADQUARTERS 629, Suezhetou Section, Kwanpu Rd., Wenshan Li, Hsinpu, Hsinchu, Taiwan TEL : +886-3-88-191 FAX : +886-3-88-19 Website : www.awea.com CENTRAL TAIWAN SCIENCE PARK
More informationTangential Fans Series TW Impeller diameter 150 mm and 200 mm
Tangential Fans Series TW Impeller diameter mm and 0 mm 105 Corporate Drive, Suite E Spartanburg, SC 293 PO Box 2889, Spartanburg, SC 294 USA Tel: 864-599-63 Fax: 864-599-6344 e-mail: info@ltg-inc.net
More informationLinear guide drives. Synchronous shafts The use of synchronous shafts enables several linear axes to be operated with one drive.
Linear guide drives Drive concept The linear guides are driven via the hollow shaft in the drive head. The drive head is used to directly install a motor or alternatively (in connection with a center shaft)
More informationElectronic Indicators / Dial Gauges / Dial Test Indicators (Lever-Type)
Electronic Indicators/Dial Gauges/Dial Test Indicators (Lever-Type) Electronic Indicators / Dial Gauges / Dial Test Indicators (Lever-Type) E-1 DIN 2270 NF E 11-053 TESATAST Dial Test Indicators (Lever-Type)
More informationClausing Industrial, Inc. Variable Speed 20" Single and Multi-spindle, Belt Drive Industrial Drill Presses
www.clausing-industrial.com Variable Speed 20" Single and Multi-spindle, Belt Drive Industrial Drill Presses Clausing Industrial, Inc. Two Speed Variable Speeds 150-2000rpm Variable Speeds 200-1300rpm
More informationSNL plummer block housings, 2, 3, 5 and 6 series Other bearing housings Large SNL plummer block housings
Bearing housings SNL plummer block housings, 2, 3, 5 and 6 series... 1033 Other bearing housings... 1058 Large SNL plummer block housings... 1058 SONL plummer block housings... 1059 SDG plummer block housings...
More informationBEARINGS Pillow Blocks
The bearing size is usually selected according to the required bearing life and reliability under a specified type of load charged on the bearing. The load applied to the bearing operating under a static
More informationMookambigai College of Engineering, Pudukkottai, Tamil Nadu, India
ISSN XXXX XXXX 2017 IJESC Research Article Volume 7 Issue No.6 Structural Optimization of ER Spring Collet for Maximized Gripping Action Ram Prasad. S 1, Pravin Kumar. N 2, Jerry Andrew Fabian. S 3 M.E
More informationLever-type Dial Test Indicators
Lever-type Dial Test Indicators www.tesatechnology.com G-1 Lever-type Dial Test Indicators TESA IP65 Electronic Dial Test Indicators Provides the advantages of a mechanical test indicator with a digital
More informationLever-type Dial Test Indicators
Lever-type Dial Test Indicators G-1 Lever-type Dial Test Indicators TESA IP65 Electronic Dial Test Indicators Provides the advantages of a mechanical test indicator with a digital reading. Inductive patented
More informationVariable Speed 20" Single and Multi-spindle, Belt Drive Industrial Drill Presses
www.clausing-industrial.com Variable Speed 20" Single and Multi-spindle, Belt Drive Industrial Drill Presses Two Speed Variable Speeds 150-2000rpm Variable Speeds 200-1300rpm Variable Speeds 300-2000rpm
More informationDNM 750 Ⅱ series. series. High Speed High Performance Horizontal Machining Center DNM 750 [ L ] Ⅱ DNM 750 [ L ] / 50 Ⅱ. ver.
DNM 750Ⅱ series High Speed High Performance Horizontal Machining Center DNM 750 Ⅱ series DNM 750 [ L ] Ⅱ DNM 750 [ L ] / 50 Ⅱ ver. EN 160803 SU High Productivity Vertical Machining Center The DNM 750 includes
More informationCTV series CHARACTERISTICS LINEAR UNITS
CTV series CHARACTERISTICS The CTV series describes s with a precision ball screw drive and two parallel, integrated, Zerobacklash rail guides. Compact dimensions allow high performance features such as,
More informationBacklash-free Torque Limiting Clutches
ES -Compact Backlash-free Torque Limiting Clutches www..de Instant separation on overload Permanent backlash-free torque transmission Readable torque adjustment Synchronous, ratchetting and overload designs
More informationROTARY MOTION CONTROL
ROTARY MOTION CONTROL Technical Data Sheet Nexen Mechanical Torque Limiter Family PMT / PMK / PMC 2TC 2CC ECC PCC Mechanical Torque Limiter The trend in industry is to design and incorporate more automation
More informationFLENDER drives Fundamental Principles of Mechanical Engineering
FLENDER drives Fundamental Principles of Mechanical Engineering Technical Handbook Technical Drawings Standardization 2 Physics 3 Mathematics / Geometry 4 Mechanics / Strength of Materials 5 Hydraulics
More informationEROWA General Catalog
EROWA General Catalog U n l o c k i n g t h e f u l l p o t e n t i a l o f y o u r m a c h i n e s System solutions from one single source This is what EROWA components offer... Competence means to understand
More informationPRODUCT CATALOG
www.engman-taylor.com 0 PRODUCT CATALOG OUR COMMITMENT TO YOU... 00% MADE PREMIUM INDUSTRIAL QUALITY PRODUCTS % ORDER FULFILLMENT SAME DAY SHIPPING NO MINIMUM ORDER REQUIREMENTS EXCEPTIONAL QUALITY CONTROL
More informationUNI EN ISO 9001:2008 UNI EN ISO 14001:2004 BS OHSAS 18001:2007 EC DIRECTIVE 2014/34/EU (ATEX) CERTIFIED MANAGEMENT SYSTEM
EN ISM-BSM CERTIFIED Technology Made in Italy Since 1955 the Varvel Group has been making speed reducers and variators for light industry applications. Reliable partner in power transmission equipment
More informationHPG xxx 030 C1 C2 C3. High performance angle gearboxes. Output. Input. Drawings. C with option motor flange. View x. Centering View y.
HPG 030 1 2 3 Input Output 1 View M6 ( deep) 0 Ø4 H (2.2 deep) 18.0 M6 ( deep) 0 2 3 M6 ( deep) 2 13.0 4 2.0 18.0 24.0 M Ø12 k6 6 M6 ( deep) M6 ( deep) 3 Eample HPG 030 2 with option motor flange 0 M6
More informationLexium integrated drives
Presentation GBX planetary gearbox Presentation In many cases the axis controller requires the use of a planetary gearbox for adjustment of speed of rotation and torque; the accuracy required by the application
More informationA wide selection of pipe and orifice sizes is offered. Valves are available with threaded ports in brass and stainless steel.
Solenoid Valve Waterhammer-Free, 0- PSI /-Way; NPT - NPT; 0- PSI Advantages/Benefits Type 63 Waterhammer-free Low noise Zero differential pressure ompact design with high flow rates Low maintenance oil
More informationPrecision Ball Screw/Spline
58-2E Models BNS-A, BNS, NS-A and NS Seal Outer ring Shim plate Seal Spline nut Seal Collar Shim plate Seal End cap Ball Outer ring Ball screw nut Outer ring Ball Retainer Retainer Outer ring Point of
More informationHilti North America Installation Technical Manual Technical Data MI System Version
MIC-SA-MAH 174671 Hilti North America Installation Technical Manual Technical Data MI System Version 1. 08.017 Terms of common cooperation / Legal disclaimer The product technical data published in these
More informationAir Cooler Industry AC-LN 1-7 / ACA-LN 2-7 / ACAF-LN 2-7
ir ooler Industry -LN -7 / -LN -7 / F-LN -7 Symbol General The -LN -7 air cooler series can be used in all areas where either oil or water-glycol is to be cooled with air. The coolers with an axial fan
More informationStandardized Chemical Pumps. Fields of Application. Designation. Design. Operating Data. Type Series Booklet /7-10 G2 CPK-H
Type Series Booklet.5/7-0 G CPK-H Standardized Chemical Pumps to EN 5/ISO 5/ISO 599, heatable Automation products available: Hya-Drive Hyamaster hyatronic Fields of Application CPK-H pumps are used for
More informationCourse: Technology II Training course topic: Metrology
Department of machining, process planning and metrology ver.2017-01 Following problems and tasks will be solved during the first two weeks of the training courses of Technology II. Detailed information
More informationDial indicators / Dial test indicators / Center instruments Edge finders / Probes / MF measuring fixture system
Dial indicators / Dial test indicators / Center instruments Edge finders / Probes / MF measuring fixture system Accuracy of dial indicators according DIN 878 Max. permissible range () errors (µm) 0-0.4
More informationOPERATING INSTRUCTIONS ROTOKLICK MK 150 MULTIKLICK MK 150 MULTIDEX
OPERATING INSTRUCTIONS ROTOKLICK MK 150 MULTIKLICK MK 150 MULTIDEX Type: Drehfutter Type: Wippe Type: Traverse Type: Würfel Haff & Schneider GmbH & Co. OHG Obere Wank 2 D-87484 Nesselwang www.haff-schneider.com
More informationTSCHAN S US Elastische Kupplungen Flexible Couplings TNS Flexible Couplings. Partner for Performance
US 11 2015 TSCHAN S Elastische Kupplungen Flexible Couplings TNS Flexible Couplings Partner for Performance www.ringfeder.com Welcome to your system supplier for every aspect of power transmission Today
More informationRotary modules.
Rotary modules www.comoso.com www.comoso.com Rotary modules ROTARY MODULES Series Size Page Rotary modules RM swivel unit 156 RM 08 160 RM 10 162 RM 12 164 RM 15 168 RM 21 172 RM rotor 176 RM 50 180 RM
More informationEROWA ProductionChuck 210 palletizing system
EROWA palletizing system 1 Standardization Organization Automation Integration T h e p o w e r f u l a n d f l e x i b l e w o r k p i e c e c l a m p i n g s y s t e m System solutions from one single
More informationLarge Vertical Turning Center with RAM Head Spindle
Large Vertical Turning Center with RAM Head Spindle With its large capacity and heavy duty machining capability, The PUMA VTS series provides excellent productivity for large workpieces 02 Features 1 Robust
More informationBearing Internal Clearance and Preload
. Bearing Internal Clearance and Preload. Bearing internal clearance Bearing internal clearance is the amount of internal free movement before mounting. As shown in Fig.., when either the inner ring or
More informationMeasurement devices. Kalevi Aaltonen, Aalto University
Measurement devices Kalevi Aaltonen, Aalto University Production engineering measurements, measuring uncertainty, measurement accuracy = statistical mathematical methods The pyramid of accuracy Material
More informationCKA Series. 3-way jaw thin chuck double acting/single acting. Operational stroke length: 5, 6, 7, 9, 20, 25, 30, 38mm.
G G B A S F J L L H LB N/ S/F Specifications Descriptions Size Cylinder bore size Operating method Working fluid Max. working pressure Min. working pressure Ambient temperature Port size Operational stroke
More informationInstruction for use Plunger Probes M FB and M78-Plus
Instruction for use Plunger Probes M5678-78FB and M78-Plus Rev 3 (10/2012) DIATEST Plunger Probe M5678-68FB Self-centering interior measuring gauge for bore diameter from 19,5 to 330 mm Design A plunger
More information3.2 HP 114 HIGH PERFORMANCE BUTTERFLY VALVE HP 114 TECHNICAL DATA
ug type butterfly valve in double-eccentric construction. Reliable sealing even with extreme temperature and pressure conditions. TECHNICA DATA Nominal diameter: 0 larger nominal diameter on request Face-to-face:
More informationZero-point clamping. Changeover in seconds! SAFE. patented collet lock
Zero-point clamping Changeover in seconds! SAFE patented collet lock Zero-point clamping since 1995 AG Company headquarters in Dübendorf Switzerland AG Werkzeug- und Spanntechnik Im Schossacher 17 CH-8600
More informationHeight Master Page 343. Check Master Page 347. Calibration Tools Page 352
Calibration Instruments Height Master Page 343 Check Master Page 347 Calibration Tools Page 352 342 Digital Height Master Functions ZERO/ABS DATA/HOLD Auto Power OFF after 20 min. non use Low voltage alarm
More information55% OFF CARBIDE HIGH SPEED STEEL COBALT. Phone: (616) Toll-Free: Fax: (616) cbdekorne.com
CARBIDE HIGH SPEED STEEL COBALT Phone: () - Toll-Free: -00--0 Fax: () - cbdekorne.com PLEASE TAKE % OFF PRINTED S END MICRO END THREAD COUNTER SINKS CHAMFER DRILL TAPS & DIES OUR COMMITMENT TO YOU...
More informationCam Roller Guides. The Drive and Control Company. Service Automation. Electric Drives and Controls. Linear Motion and Assembly Technologies
Industrial Hydraulics Electric Drives and Controls Linear Motion and Assembly Technologies Pneumatics Service Automation Mobile Hydraulics Cam Roller Guides The Drive and Control Company Linear Motion
More information3D Drawing - CARIF 260 BSA
D Drawing - CARIF 0 BSA DRAWING CODE DRAWING NAME NUMBER ASS000 Basement ASS00 Vice Base ASS00 Vice A ASS00B Vice B ASS00 Frame A ASS00B Frame B ASS000 Frame Cylinder A ASS000B Frame Cylinder B ASS000
More informationNFP500A-5AX. High Speed High Precision Gantry 5-axis machining center
NFP500A-5AX High Speed High Precision Gantry 5-axis machining center NFX500A-5AX Product Positioning 1 High-end A. small double column NFP500A-5AX B. Big double column DCV2018A-5AX series C. Big double
More informationNORMACLAMP Hose Clamps
TORRO Worm Drive Hose Clips to DIN 3017 Short description of technical features TORRO hose clips are specially suitable for applications under high mechanical loads. Since we are continuously working to
More information3.1 HP 111 HIGH-PERFORMANCE BUTTERFLY VALVE HP 111 TECHNICAL DATA
HIGH-PERFORMANCE BUTTERFY VAVE HP 111 Wafer type butterfly valve in double-eccentric construction. Reliable sealing even with extreme temperature and pressure conditions. TECHNICA DATA Nominal diameter:
More informationIL series. Centrifugal marine IN-LINE pumps
IL series Centrifugal marine IN-LINE pumps DESCRIPTION Vertically built centrifugal IN-LINE pumps are made with standardized DIN-22 parts, with in-line suction and discharge flanges. This arrangement requires
More informationBRIGHT-STRATO SERIES
Coordinate Measuring Machines BRIGHT-STRATO SERIES CNC Coordinate Measuring Machine Bulletin No. 1855 Moving-bridge type CMM with excellent measuring accuracy. Its measuring envelope is suitable for medium-to-large
More informationK 080/12 F 10 K 3-2X/.. Features
RE 2 1/11.02 Replaces: 0.2 Fine throttle Type F Nominal sizes and Series 2X and 3X Maximum operating pressure 2 bar Maximum flow 0 L/min K 00/12 F K 3-2X/.. K 0/ F P 3-3X/.. Overview of contents Contents
More informationBacklash-free Safety Couplings. pioneer in innovation
Backlashfree Safety Couplings pioneer in innovation T h e m o d u l a r s y s t e m s a t i s f i e s a l l y o u r w i s h e s! Edition 8/007 G E R W A H T h e C o m p a n y GERWAH GmbH was founded in
More informationWenzhou Tripod Instrument Manufacturing Co., Ltd.
Wenzhou Tripod Instrument Manufacturing Co., Ltd. Website: http://aliyiqi.en.alibaba.com http://www.wzydyq.com/english/ Phone: 86-577-57572515 57572515 Fax: 86-577-57572516 57572516 E-mail: aliyiqi@gmail.com
More informationMetrology is science considering measurement
Metrology is science considering measurement Categories: Scientific deals with organization and development of etalons and their conservation(highest level) Industrial deals with function of measuring
More informationAutomatic Level Maintenance Manual SAL-XX W/ AIR DAMPENED COMPENSATOR
Automatic Level Maintenance Manual SAL-XX W/ AIR DAMPENED COMPENSATOR CST/Berger 2001 SAL 20/24/28/32 PAGE 1 REV. C 071803 Automatic Level Maintenance Manual User Calibration and Testing... 3 Circular
More informationBSD MODULFLEX R Torsionally Rigid Couplings
BSD MODULFLEX R Torsionally Rigid Couplings for T1F Torque Flange View B Thread opening turned in sectionel plane b b 6 b 7 b 2 b 8 b 3 b za View A A B NVm 1 NVm View A btot Reference dimension X X 2 NVm
More informationAnalysis of Non-Linear Machine Tool Dynamic Behaviour
Proceedings of the 5 th Manufacturing Engineering Society International Conference Zaragoza June 13 Analysis of Non-Linear Machine Tool Dynamic Behaviour A. S. Delgado (1), E. Ozturk (), N. Sims (3) (1)
More informationCheck-Q-meter. Table of contents. Features. Functions. RE 27551/ /10 Replaces: Type FD
Check-Q-meter RE /0.0 /0 Replaces: 09.9 Type FD Nominal size... Series ax. Operating pressure 0 bar ax. Flow 0 l/min K9/ Table of contents Contents Page Features Functions Ordering details Symbols Functional
More informationProduct Description. Further highlights. Outstanding features. 4 Bosch Rexroth Corporation Miniature Linear Modules R310A 2418 (2009.
4 Bosch Rexroth orporation Miniature Linear Modules R310A 2418 (2009.05) Product Description Outstanding features Rexroth Miniature Linear Modules are precise, ready-to-install linear motion systems that
More informationTAKE 55% OFF ALL LIST PRICES IN CATALOG!
YOUR # SOURCE FOR AMERICAN-MADE PREMIUM CUTTING TOOLS % OFF ALL S IN CATALOG! ENDMILLS MICRO ENDMILLS THREADMILLS DRILLS TAPS & DIES CHAMFER MILLS DRILL MILLS BURS COUNTERSINKS REAMERS Our commitment to
More informationKrantz Components. Twist outlet DD-N... for ceiling installation. Air distribution systems
Krantz Components Twist outlet DD-N... for ceiling installation Air distribution systems DS E 0. Twist outlet Preliminary remarks and construction design Preliminary remarks Twist outlets for ceiling installation
More informationAbsolute encoders multiturn
elektronischer electronic multiturn, Multiturn, magnetic magnetisch Sendix M66 / M68 (shaft / hollow shaft) The Sendix M6 with Energy Harvesting Technology is an electronic multiturn encoder in miniature
More informationDimensions of propulsion shafts and their permissible torsional vibration stresses
(Feb 2005) (orr.1 Mar 2012) (orr.2 Nov 2012) Dimensions of propulsion shafts and their permissible torsional vibration stresses.1 Scope This UR applies to propulsion shafts such as intermediate and propeller
More informationNORMACLAMP Hose Clamps
NORMACLAMP NORMACLAMP NORMACLAMP TORRO Worm Drive Hose Clips to DIN 3017 Short description of technical features NORMACLAMP TORRO hose clips are specially suitable for applications under high mechanical
More informationTechnical Guide TG-19-C-001-E D. Produced by: rendav Date: Modifications: See last page CALIBRE 2500
Technical Guide TG-19-C-001-E D Produced by: rendav Date: 04.06.2009 3 Modifications: See last page CALIBRE 2500 Version A Version B Version C 111/2 Ø 25,60 mm 1 2 3 Height on movement Power reserve Number
More informationhard material matters HSC-HPC Tools for High Speed / Performance Cutting
hard material matters HSC-HPC Tools for High Speed / Performance Cutting CERATIZIT USA and the parent companies Headquarters and parent company in MAMER / Luxembourg Parent company in REUTTE / Austria
More informationThe perfect Torque Limiting Clutch for
The perfect Torque Limiting Clutch for Machine Tools Packaging Machinery Printing and Paper Machinery Automated Systems Power Transmission compact, backlash-free torque limiting clutch Immediate disengagement
More informationLevel-Type Dial Indicator
Level-Type Dial Indicator Feature Swiss style precision gear module design, precision display, aluminum or steel housing, ensuring reliability and durability. Produced and calibrated according to German
More informationTomelleri S.r.l. Copyright 2007 ADVANCED SYSTEMS
Tomelleri S.r.l. Copyright 2007 ADVANCED SYSTEMS s.r.l.started its activities back in 1984, developing projects (feasibility studies and designs) in astronomy and other sectors (such as machine tools,
More informationZF Maschinenantriebe GmbH Industrial Drives. Planetary gearboxes Economy Series for Servomotors
ZF Maschinenantriebe GmbH Industrial rives Planetary gearboxes Economy Series for Servomotors 2 ZF-uoplan 2K Two-speed Gearboxes ZF-Ecolift Elevator Gearboxes ZF-Servoplan G ompact Gearbox ZF-Tiratron
More informationAir distribution systems. Adjustable radial outlet RA-V...
Air distribution systems Adjustable radial outlet RA-V... DS E 0.2013 Construction design Preliminary remarks KRANTZ KOMPONENTEN has developed its wellknown, successful radial outlet into an adjustable
More informationBacklash-free Safety Couplings
Backlashfree Safety Couplings You Can Rely On Us! T h e m o d u l a r s y s t e m s a t i s f i e s a l l y o u r w i s h e s! Edition /00 G E R W A H T h e C o m p a n y GERWAH GmbH was founded in 19.
More informationIndustrial Air Diffuser Type DLD for Heating and Cooling
LTG Incorporated Industrial Air Diffuser Type DLD for Heating and Cooling LTG Incorporated Corporate Drive, Suite E Spartanburg, SC 20 PO Box 288, Spartanburg, SC 20 USA Tel: 8--0 Fax: 8-- e-mail: info@ltg-inc.net
More informationPOLE WHEELS. Where the shaft is very large a cost-effective alternative is to add a pole band (see following section).
A pole wheel on the target shaft is required when using contactless sensors to generate a signal. Often an existing gear wheel can be used but where none is present a special gear, slotted or holed disk
More information2 - Machining Fundamentals Measurement. Manufacturing Processes - 2, IE-352 Ahmed M El-Sherbeeny, PhD Spring-2015
2 - Machining Fundamentals Measurement Manufacturing Processes - 2, IE-352 Ahmed M El-Sherbeeny, PhD Spring-2015 Learning Objectives Measure to 1/64 (.5 mm) with a steel rule Reading an Inch-based Vernier
More information14:1400 (0206) KRAL Volumeter - OMG
14:1400 (0206) KRAL Volumeter - OMG OMG - Universal OMG The flowmeter for a wide range of applications Operating Conditions and Materials Flow Range: 0.1 to 7,500 l/min Max. Pressure: 250 bar Temperature
More informationRubber- and cellular buffers
Rubber- and cellular buffers Rubber- and cellular buffers Industrial Brakes Thrusters Pressure Oil Pumps Couplings Hydraulic Buffers Cellular Buffers Rail Pliers Sheaves Hook Blocks Crane Rail Wheels Rail
More informationOperating Instructions for Digital Manometer. Model: MAN-SD
Operating Instructions for Digital Manometer Model: MAN-SD 1. Contents 1. Contents...2 2. Note...3 3. Instrument Inspection...3 4. Regulation Use...4 5. Operating Principle...4 6. Mechanical Connection...5
More informationLES. Single-stage end-suction pumps Identification Type key
Contents Singlestage endsuction pumps Identification Type key Product data Introduction Applications Features and benefits Performance range pole pole 6 pole Construction Sectional drawing Construction
More information4/3-way servo solenoid directional control valves with electrical position feedback (Lvdt DC/DC) (ruggedized design)
4/3-way servo solenoid directional control valves with electrical position feedback (Lvdt DC/DC) (ruggedized design) Type 4WRL10...25 Sizes (N) 10, 16, 25 Unit series 3 Maximum working pressure P,, 350
More informationCONTENTS INDEX P. 2 P. 3-4 PRODUCT FEATURES P. 5-6 PRODUCT STRUCTURE P. 7-8 PRODUCT APPLICATIONS PRODUCT SELECTION P P. 11 MODEL LIST P.
EMER-FLEX COUPLING CONTENTS INDEX PRODUCT FEATURES PRODUCT STRUCTURE PRODUCT APPLICATIONS PRODUCT SELECTION MODEL LIST NEF-HUB NES Series P. 2 P. 3-4 P. 5-6 P. 7-8 P. 9- P. P. 2 P. 3-4 NEF Series Spacer
More informationLocking Assemblies for use with bending loads
US 07 2014 ocking Assemblies for use with bending loads Partner for performance www.ringfeder.com Welcome to your system supplier for every aspect of power transmission Today s RINGFEDER POWER TRANSMISSION
More informationEdition 3 September Air Angle Wrench and Nut Runner. QA6 and QA8 Series. Parts Information. Save These Instructions
660072 Edition 3 September 2007 Air Angle Wrench and Nut Runner QA6 and QA8 Series Parts Information Save These Instructions Module Exploded Diagram 7 5 9 7 2 9 50 3 8 3 38 39 8 9 20 2 33 22 23 3 2 3 37
More informationNew design with innovative plug-and-play technology
technical details New design with innovative plug-and-play technology E-520. on Unitech XV600 E / T3 T T + M Summary 7 MOT / KB 2 6 TIG 3 5 35% shorter and attachable from the outside in any position technical
More informationCooler-Bypass Thermostat Valve, Size 10
Cooler-Bypass Thermostat Valve, Size Q max = l/min, p max = bar Temperature-controlled, integral relief function Description These direct acting bypass thermostat valves are size, temperature controlled,
More informationFlow Divider Type MH2FA, Series 4X (Differential lock) Size 12 to 32 up to 420 bar up to 300 L/min
RE 8/0.98 8/0.9 Flow Divider Type MHF, eries X (Differential lock) ize to up to 0 bar up to 00 /min RE 8/0.98 Replaces: 0.9 Characteristics: Double-acting (dividing and summating) flow divider Fixed division
More informationChapter 1 General Introduction Instructor: Dr. Mürüde Çelikağ Office : CE Building Room CE230 and GE241
CIVL222 STRENGTH OF MATERIALS Chapter 1 General Introduction Instructor: Dr. Mürüde Çelikağ Office : CE Building Room CE230 and GE241 E-mail : murude.celikag@emu.edu.tr 1. INTRODUCTION There are three
More informationLUSTRON V3 LUSTROUS GREEN TECHNOLOGY OF LIGHTINGS LUSTRON V3. High Power Solid-State LED Light Source
Technical Datasheet LS45 High Power Solid-State LED Light Source Introduction For a brighter solid-state light source, Lustrous Technology is proud to release the new. Ideal for your high concentration
More informationMADILL MBT GRAPPLE RETURN TO INDEX
MADILL MBT GRAPPLE RETURN TO INDEX MBT CONTROL VALVE Additional Parts Breakdown for: - Outrigger Sections - Rotate Section - End Plate E 00- page Valve section Basic element without additional functions
More informationDRIVE-TECHNOLOGY INKOMA - GROUP. SDA - Spindle direct drive actuator. Maschinenfabrik ALBERT GmbH Technologiepark 2 A Gampern - Austria
DRIVETECHNOLOGY ALBERTINKOMA GROUP SDA Spindle direct drive actuator Mascinenfabrik ALBERT GmbH Tecnologiepark A Gampern Austria pone: +/(0)0 fax: +/(0)0 email: office@albert.at internet: www.albert.at
More informationDial Test Indicators SERIES 513
Dial Test s SERIES 513 Narrow or deep places, which cannot be measured with a normal dial gauge, can be easily and accurately measured. Mitutoyo's proprietary new structure permits smooth pointer operation.
More informationPneumatic Universal. Actuator MOTORIZED VALVES USE TECHNICAL FEATURES OF THE ACTUATOR. Data sheet
Data sheet. - 8 USE The motorized valve is specifically used for the interception and regulation of fluids in: systems using alternative energy industrial systems in general using hot and cold fluids automation
More informationSAVE UP TO 30% 2016 PRODUCT PROMOTION FULLY CALIBRATED 2 YEAR WARRANTY DISTRIBUTED BY:
SAVE UP TO 30% 2016 PRODUCT PROMOTION FULLY CALIBRATED 2 YEAR WARRANTY DISTRIBUTED BY: PRICING EXTENDED UNTIL SEPTEMBER 30, 2018 Empowering Possibilities Precision is not only defined by degrees of exactness.
More informationDrive Units with Ball Screw Drives R310EN 3304 ( ) The Drive & Control Company
Drive Units with Ball Screw Drives R310EN 3304 (2007.05) The Drive & Control Company Linear Motion and Assembly Technologies Ball Rail Systems Roller Rail Systems Linear Bushings and Shafts Precision Ball
More informationHeavy-Duty Horizontal Machining Center
Heavy-Duty Horizontal Machining Center The New Generation World-Class NHM series of Heavy-Duty Horizontal Machining Centers The NHM series combines the heavy-duty cutting, unsurpassed machining capacity
More informationLUSTROUS GREEN TECHNOLOGY OF LIGHTING
Technical Datasheet LS 46 High Power Solid-State LED Light Source Introduction For a brighter solid-state light source, Lustrous Technology is proud to release the new. Ideal for your high lumen output
More informationMACHINING CENTER FIXED DOUBLE COLUMNS. Quality, Credibility, Innovation, Service. Auto A/C swiveling head. Auto 90 o milling head
Quality, Credibility, Innovation, Service Special angle milling head 3D Tilted Working Plane Indexing Axis Simultaneous milling head FIXED DOUBLE COLUMNS MACHINING CENTER Machine coordinate system Workplece
More informationORTHOBLOC 3000 Drive systems Maintenance
15 en 284 261 282 113 130 120 061 002 264 193 099 001 25 063 65 119 112 133 252 254 1 115 118 04 ORTHOBLOC 3000 Maintenance NOTE LEROY-SOMER reserves the right to modify the characteristics of its products
More informationEXACTNESS IN THE NANOMETER RANGE USED TO BE A UTOPIAN AND THEN THERE WAS PRECIMAR
- EXACTNESS IN THE NANOMETER RANGE USED TO BE A UTOPIAN IDEAL AND THEN THERE WAS PRECIMAR The Precimar product family specializes in high-precision dimensional metrology for absolute and relative measurements.
More information