Coromant Capto Short Adapter
|
|
- Chloe Jacobs
- 5 years ago
- Views:
Transcription
1 Coromant Capto Short Adapter The quick change system for reduced setup and production time. Faster return on investment.
2 Short Adapter Short Adapter More available cutting tool length Short toolholder projection with no gripper groove Higher accuracy Smaller runout error through reduced projection length
3 Interface ISO. The short Coromant Capto adapters are designed for driven precision toolholders providing significant advantages. Short adapter for segment clamping only. Cannot be used in basic holders, extensions, or reductions. Not for automatic tool change (ATC). Higher stability Lower vibrations through reduced tool projection length Longer lifetime Lower load on the bearings through shorter torsion WTO GmbH I Subject to change without notice
4 Short Adapter Short collet chuck adapter without gripper groove DIN, ISO 1 Coupling D m min max D 1 l C l l 1 kg Nm C CW ER CW ER CW ER C CW ER CW ER CW ER C CW ER CW ER CW ER C CW ER CW ER Short hydro high precision chuck adapter without gripper groove Coupling C C CW1.CGC 0 CW1.CGC 0 D m d m t D 1. l C l l 1 kg Note: Without adjustment screw. Available collets in accessories section. C CW1.CGC 0 0. C CW1.CGC WTO GmbH I Subject to change without notice
5 Short Adapter Short Weldon/Whistle Notch shank adapter without gripper groove For tool shanks according to DIN HB and HE Coupling D m D 1 I 1 l C l l 1 kg C CW CW CW CW CW CW C CW CW CW CW CW CW CW CW C CW CW CW CW CW CW CW CW CW C CW CW CW CW CW CW CW CW CW CW Note: Without adjustment screw. WTO GmbH I Subject to change without notice
6 Short Adapter Short shrink fit adapter without gripper groove For cylindrical tool shanks Coupling D m D 1 D l C l 1 l kg C CW CW CW CW C CW CW CW CW CW CW C CW CW CW CW CW CW C CW CW CW CW CW CW Note: Without adjustment screw. Note: The tolerance of the cutting tool shank diameter must be h or better. The cylindrical tool shank should be cleaned and deburred before mounting into the adapter. Shrink fit heating equipment The shrink fit adapters depend upon applying heat to expand the adapter. When cooled, the adapter contracts to grip around the tool shank. Please check if your induction heating equipment can accept the special dimensions of the above short shrink fit adapters. For guaranteed function, optimal tool performance, and for safe and easy handling of the clamping process, it is recommended that Bilz Power Clamp induction heating equipment for short adapters is used. It is required to follow the instruction from the induction heating equipment producer. Further information is available at WTO GmbH I Subject to change without notice
7 Short Adapter Short combination mill adapter without gripper groove For side mills, face mills, or disk cutters Coupling D m D t I C l 1 S kg C CW CW C CW CW CW C CW CW CW C CW CW CW Delivery with the arbor clamping bolt without hole for coolant supply. Note: Universal design: key and drivers can be removed. Arbor clamping bolt with coolant hole for internal coolant supply Arbor WTO GmbH I Subject to change without notice
8 Accessories Cylindrical collets for short hydro high precision chuck adapter Slotted dm m I dm m I , 0 00, 0 00, 0 00, 00, 00, 00, 00, 0, 0, 1 1 WTO GmbH I Subject to change without notice
9 Accessories Cylindrical collets for short hydro high precision chuck adapter Sealed dm m I I dm m I I Wrench for dismounting cylindrical collets Note: l = clamping length required to achieve the sealing effect. WTO GmbH I Subject to change without notice
10 Short Adapter Highest precision To guarantee the high precision of the interface WTO manufactures Coromant Capto exactly with the same tolerances required by Sandvik Coromant.
11 WTO is worldwide the first licensee for toolholders with Coromant Capto (since 1). The close cooperation with Sandvik Coromant since 0 ensures WTO s knowhow to manufacture Coromant Capto. WTO manufactures Coromant Capto exactly according to the same strict manufacturing and inspection procedures as the original product of Sandvik Coromant. Therefore a 0% compatibility of the interface can be guaranteed. WTO GmbH I Subject to change without notice 11
12 Higher Productivity Sandvik Coromant and WTO Leaders in technology, competence, highest precision, quality without compromise, and innovative developments. The strong partnership between these two companies exists since 0. During this period of time Sandvik Coromant and WTO have constantly developed toolholder solutions for the success of our customers. Why use Coromant Capto toolholders? Designed specifically for your machine Better performance Faster tool changes Use Coromant Capto tools for turning, milling and drilling Readyequipped to channel high pressure coolant to the latest in CoroTurn HP cutting heads Tooling packages and certificates When you pay for a new machine, make sure it pays you back. By reducing payback time, you reduce the time it takes for your new machine to start making your business more profitable. Sandvik Coromant also offers custom tooling packages to unleash the potential of your investment, right from the start. To order or for more information, please contact your appointed Sandvik Coromant Representative. 0 I 1 en
GUHROSync Synchro tapping chucks THE BEST OF BOTH SYSTEMS GUHRING - YOUR WORLD-WIDE PARTNER
THE BEST OF BOTH SYSTEMS THE ADVANTAGES OF HYDRAULIC CHUCKS & SYNCHRO TAPPING CHUCKS IN ONE TOOL HOLDER GUHROSync Synchro tapping chucks GUHRING - YOUR WORLD-WIDE PARTNER GUHROSYNC THE EASY WAY TO THE
More informationLever-type Dial Test Indicators
Lever-type Dial Test Indicators www.tesatechnology.com G-1 Lever-type Dial Test Indicators TESA IP65 Electronic Dial Test Indicators Provides the advantages of a mechanical test indicator with a digital
More informationLever-type Dial Test Indicators
Lever-type Dial Test Indicators G-1 Lever-type Dial Test Indicators TESA IP65 Electronic Dial Test Indicators Provides the advantages of a mechanical test indicator with a digital reading. Inductive patented
More informationPrecision Ball Screw/Spline
58-2E Models BNS-A, BNS, NS-A and NS Seal Outer ring Shim plate Seal Spline nut Seal Collar Shim plate Seal End cap Ball Outer ring Ball screw nut Outer ring Ball Retainer Retainer Outer ring Point of
More informationLevel-Type Dial Indicator
Level-Type Dial Indicator Feature Swiss style precision gear module design, precision display, aluminum or steel housing, ensuring reliability and durability. Produced and calibrated according to German
More informationT20WN. Data Sheet. Torque transducers. Special features. Installation example with bellows couplings. B en
T20WN Torque transducers Data Sheet Special features - Nominal (rated) torques 0.1 N m, 0.2 N m, 0. N m, 1 N m, 2 N m, N m, 10 N m, 20 N m, 0 N m, 100 N m, 200 N m - Accuracy class: 0.2 - Contactless transmission
More informationCTV series CHARACTERISTICS LINEAR UNITS
CTV series CHARACTERISTICS The CTV series describes s with a precision ball screw drive and two parallel, integrated, Zerobacklash rail guides. Compact dimensions allow high performance features such as,
More informationBacklash-free Torque Limiting Clutches
ES -Compact Backlash-free Torque Limiting Clutches www..de Instant separation on overload Permanent backlash-free torque transmission Readable torque adjustment Synchronous, ratchetting and overload designs
More informationIBV Series C Carbon Steel Inverted Bucket Vertical Steam Trap
Local regulations may restrict the use of this product to below the conditions quoted. In the interests of development and improvement of the product, we reserve the right to change the specification without
More informationNORMACLAMP Hose Clamps
TORRO Worm Drive Hose Clips to DIN 3017 Short description of technical features TORRO hose clips are specially suitable for applications under high mechanical loads. Since we are continuously working to
More informationIBV Series Z Alloy Steel Inverted Bucket Vertical Steam Trap
Local regulations may restrict the use of this product to below the conditions quoted. In the interests of development and improvement of the product, we reserve the right to change the specification without
More informationMookambigai College of Engineering, Pudukkottai, Tamil Nadu, India
ISSN XXXX XXXX 2017 IJESC Research Article Volume 7 Issue No.6 Structural Optimization of ER Spring Collet for Maximized Gripping Action Ram Prasad. S 1, Pravin Kumar. N 2, Jerry Andrew Fabian. S 3 M.E
More informationtrunniontable.com Trunnion Tables for Haas Verticals
Trunnion Tables for Haas Verticals I would recommend Martin Trunnion Tables to anyone that s looking for a long lasting solution that will out perform anything else out there. trunniontable.com 859-727-9900
More informationClausing Industrial, Inc. Variable Speed 20" Single and Multi-spindle, Belt Drive Industrial Drill Presses
www.clausing-industrial.com Variable Speed 20" Single and Multi-spindle, Belt Drive Industrial Drill Presses Clausing Industrial, Inc. Two Speed Variable Speeds 150-2000rpm Variable Speeds 200-1300rpm
More informationVariable Speed 20" Single and Multi-spindle, Belt Drive Industrial Drill Presses
www.clausing-industrial.com Variable Speed 20" Single and Multi-spindle, Belt Drive Industrial Drill Presses Two Speed Variable Speeds 150-2000rpm Variable Speeds 200-1300rpm Variable Speeds 300-2000rpm
More informationNORMACLAMP Hose Clamps
NORMACLAMP NORMACLAMP NORMACLAMP TORRO Worm Drive Hose Clips to DIN 3017 Short description of technical features NORMACLAMP TORRO hose clips are specially suitable for applications under high mechanical
More informationEROWA General Catalog
EROWA General Catalog U n l o c k i n g t h e f u l l p o t e n t i a l o f y o u r m a c h i n e s System solutions from one single source This is what EROWA components offer... Competence means to understand
More informationDRS 61: Incremental encoders, number of lines and zero pulse width freely programmable DRS 60: Incremental Encoders with Zero-Pulse-Teach
NEW DRS : Incremental encoders, number of lines and zero pulse width freely programmable DRS : s with Zero-Pulse-Teach Further highlights of this generation of encoders: Simple zero-pulse-teach by pressing
More informationtrunniontable.com
I would recommend Martin Trunnion Tables to anyone that s looking for a long lasting solution that will out perform anything else out there. - Jordan Meier, Haas Applications Engineer trunniontable.com
More informationCompact Orifice FlowMeter
Steam Data Reference Tables IM/OM/SDT Issue 1 Compact Orifice FlowMeter ABB The Company We are an established world force in the design and manufacture of instrumentation for industrial process control,
More informationBallistic pendulum Operating Instructions Fig. 1: Ballistic pendulum SAFETY PRECAUTIONS
R Ballistic pendulum 11229.00 PHYWE Systeme GmbH & Co. KG Robert-Bosch-Breite 10 D-37079 Göttingen 6 3.8 3.7 3.6 3.5 Phone +49 (0) 551 604-0 Fax +49 (0) 551 604-107 E-mail info@phywe.de Internet www.phywe.de
More informationOPERATING INSTRUCTIONS ROTOKLICK MK 150 MULTIKLICK MK 150 MULTIDEX
OPERATING INSTRUCTIONS ROTOKLICK MK 150 MULTIKLICK MK 150 MULTIDEX Type: Drehfutter Type: Wippe Type: Traverse Type: Würfel Haff & Schneider GmbH & Co. OHG Obere Wank 2 D-87484 Nesselwang www.haff-schneider.com
More informationHaas trunnions have more than one configuration. Thus, to make a program for the trunnion, you must know these facts:
Haas Technical Documentation Trunnion Information Scan code to get the latest version of this document Translation Available Trunnion Features Haas trunnions have more than one configuration. Thus, to
More informationElectronic Indicators / Dial Gauges / Dial Test Indicators (Lever-Type)
Electronic Indicators/Dial Gauges/Dial Test Indicators (Lever-Type) Electronic Indicators / Dial Gauges / Dial Test Indicators (Lever-Type) E-1 DIN 2270 NF E 11-053 TESATAST Dial Test Indicators (Lever-Type)
More informationIndustrial Engineering and Ergonomics
Industrial Engineering and Ergonomics Exercise Unit 4 Analysis of the time structure of working processes Fall Winter 2015/2016 Univ.-Prof. Dr.-Ing. Dipl.-Wirt.-Ing. Christopher M. Schlick Chair and Institute
More informationConductivity sensor for hygienic applications
Conductivity sensor for hygienic applications Type 8221 can be combined with Perfect for demanding applications in the hygienic industry (CIP and SIP compatible) Variants available for usage over a wide
More informationFLT5A FLT5A. abc. abc. Thermometer User Guide. Thermometer User Guide. Internet:
abc instruments international FLT5A Thermometer Land Instruments International Dronfield, S18 1DJ England Telephone: (1246) 417691 Facsimile: (1246) 41585 Email: infrared.sales@landinst.com Internet: www.landinst.com
More informationSize : Ends : Min Temperature : Max Temperature : Materials : Brass
Size : Ends : Min Temperature : Max Temperature : DN 1/2" to 1 Free nut BSP, male or female - 10 C + 120 C Max Pressure : 20 Bars Specifications : Before or after water meter PTFE packing With free nut
More informationAF SERIES AWEA MECHANTRONIC CO., LTD. High Performance Vertical Machining Center AGENT ISO 9001 ISO 14001
AWEA MECHANTRONIC CO., LTD. HEADQUARTERS 629, Suezhetou Section, Kwanpu Rd., Wenshan Li, Hsinpu, Hsinchu, Taiwan TEL : +886-3-88-191 FAX : +886-3-88-19 Website : www.awea.com CENTRAL TAIWAN SCIENCE PARK
More information1
Process methodologies for temporary thin wafer handling solutions By Justin Furse, Technology Strategist, Brewer Science, Inc. Use of temporary bonding/debonding as part of thin wafer handling processes
More informationMetal core drills the most cost-effective drilling experience.
Metal core drilling Metal core drills the most cost-effective drilling experience. Core drilling is an extremely efficient process: faster, quieter and more accurate than twist drilling. And since core
More informationSize : Ends : Min Temperature : Max Temperature : Materials : Brass
Size : Ends : Min Temperature : Max Temperature : DN 1/2" to 1 Free nut BSP, male or female - 10 C + 120 C Max Pressure : 25 Bars Specifications : Before or after water meter PTFE packing With free nut
More informationI N J E C T I O N M O U L D I N G F A C T O R Y
I N J E C T I O N M O U L D I N G F A C T O R Y F U T U R E I N S H A P E screw and plug cans with tamper evident closure measuring spoons and beakers thick side cans cans with snap lid C O N T E N T S
More informationDimensional drawing face mount flange radial. R = bending radius min. 40 mm. Dimensional drawing face mount flange axial
Incremental Encoder DRS/DRS, face mount flange up to 8,2 Dimensional drawing face mount flange radial Incremental Encoder Connector or cable outlet Protection class up to IP s TTL and HTL Zero-Pulse-Teach
More informationVD1 CLC. Small Valves DIN-range with a higher k v -value
0 EN - Small Valves DIN-range with a higher k v -value VD CLC Valve body made of brass, mat nickel-plated DN, DN 0 and DN Internally and externally threaded (Rp / R) conforming to ISO 7- Manual knob /
More informationInspecting in a time-saving manner
Inspecting in a time-saving manner QCD - QUICK CHANGE DESIGN The components of the scalable and user-friendly ROVION pipe inspection system can be combined modularly and individually to a system according
More informationMODEL NAME : LLDMWW0-15K*0*A
Eagle Eye (Outdoor LED Module) Application Note MODEL NAME : LLDMWW0-15K*0*A RoHS Compliant HALOGEN FREE (30)-4022 1 / 16 CONTENTS 1. Product Description 3/16 2. Specifications 2.1. Chromaticity Bins for
More informationSTANDARD & OPTION 1 X, Y, Z axis linear scale 2 Saddle slideway cover 3 Table slideway cover 4 Table Splash guard 5 Working light 6 Coolant circulatio
STANDARD & OPTION X, Y, Z axis linear scale 2 Saddle slideway cover 3 Table slideway cover Table Splash guard 5 Working light 6 Coolant circulation system 7 8 ITEM Bolts & leveling pads for installation
More informationTangential Fans Series TW Impeller diameter 150 mm and 200 mm
Tangential Fans Series TW Impeller diameter mm and 0 mm 105 Corporate Drive, Suite E Spartanburg, SC 293 PO Box 2889, Spartanburg, SC 294 USA Tel: 864-599-63 Fax: 864-599-6344 e-mail: info@ltg-inc.net
More informationDN 1/4" to 4" Male, Female BSP - 10 C C Max Pressure : 40 Bars Specifications : Anti blow-out stem PTFE packing Full bore.
Size : Ends : Min Temperature : Max Temperature : DN 1/4" to 4" Male, Female BSP - 10 C + 120 C Max Pressure : 40 Bars Specifications : Anti blow-out stem PTFE packing Full bore Materials : Brass Page
More informationBARNHART BOLT - Late Model Okuma & Hurco CNC Machinery
Asset Sales, Inc. BARNHART BOLT - Late Model Okuma & Hurco CNC Machinery (5) Okuma CNC Turning Centers new as 2011, Hurco CNC VMC, mfg.2014, Mori Seiki HD Engine Lathe, Alliant Var. Speed Knee Mill, Plus
More informationHilti North America Installation Technical Manual Technical Data MI System Version
MIC-SA-MAH 174671 Hilti North America Installation Technical Manual Technical Data MI System Version 1. 08.017 Terms of common cooperation / Legal disclaimer The product technical data published in these
More informationOperating Instructions for Digital Manometer. Model: MAN-SD
Operating Instructions for Digital Manometer Model: MAN-SD 1. Contents 1. Contents...2 2. Note...3 3. Instrument Inspection...3 4. Regulation Use...4 5. Operating Principle...4 6. Mechanical Connection...5
More informationNR ROTARY RING TABLE: FLEXIBLE IN EVERY RESPECT
NR FREELY PROGRAMMABLE ROTARY TABLES NR ROTARY RING TABLE All NR rings allow customer-specific drive motors to be connected NR ROTARY RING TABLE: FLEXIBLE IN EVERY RESPECT WHEN IT S GOT TO BE EXACT We
More informationSize : Ends : Min Temperature : Max Temperature : Materials : Brass
Size : Ends : Min Temperature : Max Temperature : DN 1/2" to 2 Free nut BSP, male or female - 10 C + 120 C Max Pressure : 20 Bars up to DN1 1/2, 16 bars over Specifications : Before or after water meter
More informationIncreased Requirements for Higher Nominal Forces, Necessities and Possibilities to Measure Them
B 3.1 Increased Requirements for Higher Nominal Forces, Necessities and Possibilities to Measure Them Dr. Schäfer, André Hottinger Baldwin Messtechnik GmbH Im Tiefen See 45, 64293 Darmstadt andre.schaefer@hbm.com
More informationCRYSTA-APEX C. The modular system for 3D CNC coordinate measurement in the production environment. Quick, versatile and high performing.
Coordinate Measuring Machines CRYSTA-APEX C The modular system for 3D CNC coordinate measurement in the production environment. Quick, versatile and high performing. Future-proofed high performance. CRYSTA-APEX
More informationWCAP-FTXX Film Capacitors
A Dimensions: [mm] B Recommended hole pattern: [mm] D1 Electrical Properties: Properties Test conditions Value Unit Tol. Capacitance 1 V/ 1 khz ± 0.2 khz C 0.1000 µf ± 10% Rated voltage U R 310 V (AC)
More informationValkPitched - Trapezoidal Rivet
ValkPitched - Trapezoidal Rivet Installation manual Use in combination with the Project Report of the ValkPVplanner Portrait configuration: page 2 to 7 Landscape configuration: page 8 to 13 Version 09
More informationDN 1/4" to 4" Male, Female BSP - 10 C C Max Pressure : 30 Bars (up to DN1") Specifications : Anti blow-out stem PTFE packing Full bore
Size : Ends : Min Temperature : Max Temperature : DN 1/4" to 4" Male, Female BSP - 10 C + 120 C Max Pressure : 30 Bars (up to DN1") Specifications : Anti blow-out stem PTFE packing Full bore Materials
More informationUNI EN ISO 9001:2008 UNI EN ISO 14001:2004 BS OHSAS 18001:2007 EC DIRECTIVE 2014/34/EU (ATEX) CERTIFIED MANAGEMENT SYSTEM
EN ISM-BSM CERTIFIED Technology Made in Italy Since 1955 the Varvel Group has been making speed reducers and variators for light industry applications. Reliable partner in power transmission equipment
More informationHomogenisation with Perfection
Homogenisation with Perfection Definition Homogenisation is the thorough mixing of two components of one system that are immiscible by their nature. Common application in microbiology is resuspending of
More informationRecommended Land Pattern: [mm]
Dimensions: [mm] Recommended Land Pattern: [mm] Electrical Properties: Properties Test conditions Value Unit Tol. Capacitance 1 V/ 1 khz ± 0.2 khz C 150 nf ±10% Rated Voltage U R 310 V (AC) max. Rated
More informationValkPitched - Trapezoidal
ValkPitched - Trapezoidal Installation manual Fixation: Thin sheet screw Portrait configuration: page 2 to 6 Landscape configuration: page 7 to 11 Version 08 EN Van der Valk Solar Systems Solar Mounting
More informationHiPace 1200, with TC 1200, DN 200 CF-F
HiPace 1200, with TC 1200, DN 200 CF-F HiPace 1200, with TC 1200, DN 200 CF-F Similar Image Powerful turbopump with a pumping speed of up to 1250 l/s for N 2 DN 200 CF-F flange for demanding UHV applications
More informationRecommended Hole Pattern: [mm]
Dimensions: [mm] Recommended Hole Pattern: [mm] Electrical Properties: Properties Test conditions Value Unit Tol. Capacitance 1 V/ 1 khz ± 0.2 khz C 680 nf ±10% Rated Voltage U R 400 V (DC) Insulation
More informationproduct manual H-3220A Benkelman Beam
05.12 product manual H-3220A Benkelman Beam General The H-3220A Benkelman Beam Apparatus is a convenient and accurate device used for measuring the deflection of flexible pavements under moving wheel
More informationBSD MODULFLEX R Torsionally Rigid Couplings
BSD MODULFLEX R Torsionally Rigid Couplings for T1F Torque Flange View B Thread opening turned in sectionel plane b b 6 b 7 b 2 b 8 b 3 b za View A A B NVm 1 NVm View A btot Reference dimension X X 2 NVm
More informationPrecision Leaded Resistors
FEATURES Approved according to CECC 40101-806 Advanced thin film technology Low TC: ± 15 to Precision tolerance of value: ± 0.1 % and ± 0.25 % Superior overall : class 0.05 Wide precision range: 10 to
More informationAN829. PolarPAK Thermal Impedance (Rth) vs. Heat Sink Assembly Clamping Torque. Vishay Siliconix. By Kandarp Pandya
PolarPAK Thermal Impedance (Rth) vs. Heat Sink Assembly Clamping Torque By Kandarp Pandya INTRODUCTION PolarPAK, the innovative power MOSFET package from, provides enhanced thermal performance, especially
More informationBest color perception in spotlighting and downlighting
Best color perception in spotlighting and downlighting Benefits Best color perception for vivid white and colors in shop lighting (even compared to HID solutions) New OSRAM true color technology optimized
More informationEROWA ProductionChuck 210 palletizing system
EROWA palletizing system 1 Standardization Organization Automation Integration T h e p o w e r f u l a n d f l e x i b l e w o r k p i e c e c l a m p i n g s y s t e m System solutions from one single
More informationRS INDUSTRY LIMITED. RS Chip Array ESD Suppressor APPROVAL SHEET. Customer Information. Part No. : Model No. : COMPANY PURCHASE R&D
APPROVAL SHEET Customer Information Customer : Part Name : Part No. : Model No. : COMPANY PURCHASE R&D Vendor Information Name: RS INDUSTRY LIMITED Part Name ARRAY TYPE MULTILAYER VARISTOR Part No. RS
More informationPhysical Pendulum Torsion Pendulum
General Physics Lab Department of PHYSICS YONSEI University Lab Manual (Lite) Physical Pendulum / Torsion Pendulum Ver.20180424 NOTICE This LITE version of manual includes only experimental procedures
More informationAnnex A Procedure for Determining the Uncertainty of Coordinate Measurement Using Multiple Method
Annex A Procedure for Determining the Uncertainty of Coordinate Measurement Using Multiple Method A.1 Procedure Rules Equipment 1. Measuring tips needed for the measurement of the feature. Measuring tips
More informationValkPitched - Trapezoidal
ValkPitched - Trapezoidal Installation manual Fixation: Thin sheet screw Use in combination with the Project Report of the ValkPVplanner Portrait configuration: page 2 to 6 Landscape configuration: page
More informationParallel grippers HGPLE, sturdy with long stroke, electric
Key features At a glance With free, speed-controlled selection of the gripping positions, flexible access is no longer a problem with the parallel gripper HGPLE. Its long stroke means it can be used with
More informationZero-point clamping. Changeover in seconds! SAFE. patented collet lock
Zero-point clamping Changeover in seconds! SAFE patented collet lock Zero-point clamping since 1995 AG Company headquarters in Dübendorf Switzerland AG Werkzeug- und Spanntechnik Im Schossacher 17 CH-8600
More informationProduct description. Compact Modules. Characteristic features. Further highlights
4 Compact Modules Product description Characteristic features Five fine-tuned sizes based on a compact precision aluminum profile with two integrated pre-tensioned ball rail systems Identical external
More informationSC125MS. Data Sheet and Instruction Manual. ! Warning! Salem Controls Inc. Stepper Motor Driver. Last Updated 12/14/2004
SC125MS Stepper Motor Driver Salem Controls Inc. Last Updated 12/14/2004! Warning! Stepper motors and drivers use high current and voltages capable of causing severe injury. Do not operate this product
More informationVX25 Enclosure System. Technical documentation PE conductor connection, current carrying capacity
VX Enclosure System Technical documentation PE conductor connection, current carrying capacity Enclosure system VX Contents Contents. General remarks. Introduction. Notes on the design of the earthing
More informationReliable Test Results
Intelligent testing Johannes J.Bührle - Agenda Reliable test results are a fundamental and highly topical aspect of materials testing. Using suitable examples we would like to show you how we view this
More information4/4-way servo solenoid directional control valves, directly operated, with electrical position feedback and on-board electronics (OBE)
4/4-way servo solenoid directional control valves, directly operated, with electrical position feedback and on-board electronics (OBE) RE 9035/. Replaces: 05. 1/1 Type 4WRPEH 6 Size 6 Unit series X Maximum
More informationSize : Ends : Min Temperature : Max Temperature : Materials : Brass
Size : Ends : Min Temperature : Max Temperature : DN 3/8" to 4" Female BSP + 0 C + 90 C ( 60 C for 302 and 322 types ) Max Pressure : 16 Bars ( 10 bars for 301-302 types ) Specifications : Swing type Metal
More informationProduct Description. Further highlights. Outstanding features. 4 Bosch Rexroth Corporation Miniature Linear Modules R310A 2418 (2009.
4 Bosch Rexroth orporation Miniature Linear Modules R310A 2418 (2009.05) Product Description Outstanding features Rexroth Miniature Linear Modules are precise, ready-to-install linear motion systems that
More informationImprovement in the Design & Manufacturing of Twin Worm Self Locking Technique and applications
Improvement in the Design & Manufacturing of Twin Worm Self Locking Technique and applications Prof. P.B. Kadam 1, Prof. M.R. Todkar 2 1 Assistant Professor, Mechanical Engineering Department, T.K.I.E.T.Warananagar,
More informationAbsolute encoders multiturn
elektronischer electronic multiturn, Multiturn, magnetic magnetisch Sendix M66 / M68 (shaft / hollow shaft) The Sendix M6 with Energy Harvesting Technology is an electronic multiturn encoder in miniature
More informationW W W. T Y G. C O M. M X
T O O L I N G E Q U I P M E N T S H A R M E N I N G S E R V I C E R E A M E R S D R I L L S E N D M I L L S D R I V E S S P I N D L E R E P A I R S E R V I C E B A L L S C R E W S E R V O S B A N D S A
More informationDimensions of propulsion shafts and their permissible torsional vibration stresses
(Feb 2005) (orr.1 Mar 2012) (orr.2 Nov 2012) Dimensions of propulsion shafts and their permissible torsional vibration stresses.1 Scope This UR applies to propulsion shafts such as intermediate and propeller
More informationIdentification Number
Identification Number The specification of Micro Linear Way LWL is specified by the identification number, which consists of a model code, a size, a part code, a preload symbol, a classification symbol,
More informationStandardized Chemical Pumps. Fields of Application. Designation. Design. Operating Data. Type Series Booklet /7-10 G2 CPK-H
Type Series Booklet.5/7-0 G CPK-H Standardized Chemical Pumps to EN 5/ISO 5/ISO 599, heatable Automation products available: Hya-Drive Hyamaster hyatronic Fields of Application CPK-H pumps are used for
More informationSurPASS. Electrokinetic Analyzer for Solid Samples. ::: Innovation in Materials Science
SurPASS Electrokinetic Analyzer for Solid Samples ::: Innovation in Materials Science SurPASS For Solid Surface Analysis The SurPASS electrokinetic analyzer helps material scientists to improve surface
More informationHiPace 300 with TC 110 and power supply pack OPS 100, DN 100 CF-F
HiPace 300 with TC 110 and power supply pack OPS 100, DN 100 CF-F HiPace 300 with TC 110 and power supply pack OPS 100, DN 100 CF-F Similar Image Rugged, powerful turbopump with a pumping speed of up to
More informationCONTENTS INDEX P. 2 P. 3-4 PRODUCT FEATURES P. 5-6 PRODUCT STRUCTURE P. 7-8 PRODUCT APPLICATIONS PRODUCT SELECTION P P. 11 MODEL LIST P.
EMER-FLEX COUPLING CONTENTS INDEX PRODUCT FEATURES PRODUCT STRUCTURE PRODUCT APPLICATIONS PRODUCT SELECTION MODEL LIST NEF-HUB NES Series P. 2 P. 3-4 P. 5-6 P. 7-8 P. 9- P. P. 2 P. 3-4 NEF Series Spacer
More informationHS515G-M. PARALOW Circle Dot Sight. User's Manual. Holosun Technologies Inc. Phone: (909) Fax: (909)
HS515G-M PARALOW Circle Dot Sight User's Manual Multi Reticle Holosun Technologies Inc. Phone: (909) 594-2888 Fax: (909) 598-4888 E-mail: info@holosun.com COLOR www.holosun.com PARALOW HS515G-M PARALOW
More informationOperating Manual 1.1-4x24 Zenith x24 Zenith
Page 1 of 16 Page 3 of 16 1. Scope description... 4 1.1 Introduction... 4 1.2 Safety instructions... 4 2. Technical data... 5 2.1 General data... 5 2.2 Dimensions... 5 3. Accessories / Scope of supply...
More informationCapacitors with screw terminals Long life industrial 85 C 12000h
FET2,FET4 Long Life Grade Capacitors Applications Uninterruptible power supplies Frequency converters FET2 FET4 For Wind power and Solar Power Features All-welded construction ensures reliable electrical
More informationPneumatic Tools / Machinery. Components and Spare Parts see pages 286 to 291
Pneumatic Tools / Machinery Extensive range of pneumatic tools: Impact Wrenches 2 3 Air Ratchets 2 3 E Drill, angle drill Die Grinders, straight and angled Chisel Hammer Set Orbital Sander, Belt Sander,
More informationProduct description. Developing lighter, more compact and. photoelectric sensor offers completely. ligent features: the sensors feature
W2S-2 Miniature photoelectric sensors Product description Developing lighter, more compact and photoelectric sensor offers completely ligent features: the sensors feature housing size. Whether it is used
More informationW e a t h e r S e a l s for Windows and Doors. E x c e l l e n c e i n S h a p e a n d F u n c t i o n
W e a t h e r S e a l s for Windows and Doors E x c e l l e n c e i n S h a p e a n d F u n c t i o n S c h a u m p r o f i l e S P 1 2 S P 3 3 F e n s t e r d i c h t u n g e n F l ü g e l f a l z d i
More informationE 094 E 103 E 143. Tank top mounting Connection up to G1 Nominal flow rate up to 135 l/min e
R e t u r n F i l t e rs E 094 E 103 E 143 Tank top mounting Connection up to G1 Nominal flow rate up to 135 l/min 20.30-5e D e s c r i p t i o n Application In the return line circuits of hydraulic systems.
More informationValkField - Single Row
ValkField - Single Row Installation manual Version 03 EN Van der Valk Solar Systems Solar Mounting Systems Please note Table of contents This manual is not project specific. This manual is not legally
More informationSpa & Wellness for Pipettes
epservices for premium performance Spa & Wellness for Pipettes Pipette Performance Plans Treat your Pipettes Well with Premium Services from the Experts! Total approach philosophy For over 60 years Eppendorf
More informationHELLA. Linear slot diffuser. Ordering codes. HELLA - Linear diffuser. Linear Diffusers 1 / 18. Example of the ordering code HELLA B-0-0-AN
Linear Diffusers / 8 HELLA Linear slot diffuser Ordering codes HELLA - Linear diffuser HELLA - Number of slots... Diffuser length L (mm) ) Increment mm... Deflector colour Damper Diffuser construction
More informationTransmitters for basic requirements SITRANS P MPS (submersible sensor) Transmitter for hydrostatic level
Overview Function s are for measuring the liquid levels in wells, tanks, channels and dams. Sensor Diaphragm p U const. U +2 (brown) I EM I - (blue) 0, U B s are submersible sensors for hydrostatic level
More informationThermal-Magnetic Circuit Breaker 2210-S2..
Thermal-Magnetic Circuit Breaker -S.. Description One, two and three pole thermal-magnetic circuit breakers with trip-free mechanism and toggle actuation (S-type TM CBE to EN 60934/IEC 934). Designed for
More informationThermal-Magnetic Circuit Breaker 2210-S2..
Thermal-Magnetic Circuit Breaker -S.. Description One, two and three pole thermal-magnetic circuit breakers with trip free mechanism and toggle actuation (S-type TM CBE to EN 6094/IEC 94). Designed for
More informationCooling Water Flow Regulator
Temperature controlled, indirectly and directly actuated diaphragm valves / seat valves Port size G 3/8 to G DN 0 to DN 0 ontinuous regulation High accuracy No auxiliary energy required Technical data
More informationPower Resistor for Mounting onto a Heatsink Thick Film Technology
DIMENSIONS in millimeters Power Resistor for Mounting onto a Heatsink Thick Film Technology FEATURES 800 W at 85 C bottom case temperature Wide resistance range: 0.3 Ω to 900 kω E24 series Non inductive
More informationCree XLamp XP-G LEDs Data Sheet
Cree XLamp XP-G LEDs Data Sheet The XLamp XP-G LED delivers unprecedented levels of light output and efficacy for a single die LED. The XLamp XP-G LED continues Cree s history of innovation in LEDs for
More information