Dial Test Indicators SERIES 513

Size: px

Start display at page:

Download "Dial Test Indicators SERIES 513"

Barnard Hudson
6 years ago
Views:

1 Dial Test s SERIES 513 Narrow or deep places, which cannot be measured with a normal dial gauge, can be easily and accurately measured. Mitutoyo's proprietary new structure permits smooth pointer operation. Use of a hard frame body provides excellent rigidity and durability. Non-magnetic pointer and contact point permit secure operation even in environments with magnetism. Use of a clear and concise wide dial face allows excellent visibility. The surface of the crystal is hard-coated, to make it scratch-resistant. Flat crystal makes gradations easy to read. Moreover, the unified structure of the outer frame prevents oil and water from permeating via the front face. Six types are available: vertical, inclined, perpendicular, horizontal, universal, and pocketable, allowing users to select the model most suited to their needs. Vertical: Standard Inclined: Dial face inclined 20, compared with the vertical type, allows easy reading. Perpendicular: Best suited for centering holes. Horizontal: The graduations can be read from the front, with the probe on the tip of the horizontal conical rod abutting the workpiece. Universal: The direction of the probe movement can be freely changed. Pocketable: Compact type Description of Icon Icon Description With revolution counter type Long contact point type Double scale spacing type, easy-on-the-eyes Compact type Dustproof type Anti-magnetic type Yellow dial face for easy-to-read () Glare-free flat crystal face with hard coating One-piece bezel with O-ring Special alloy sector gear Dove tail ø2mm -tipped contact point (Inclination range: 200 ) Dovetail, 3 positions (one-piece structure) Jeweled bearing Large pitch crown gear Cushion rubber Pivot bearing Ruby contact point F-3

Optional Accessories : : Holding bar : Stem : points Special

513-90 (mm) 513-404E: Dial test indicator 7014: Mini magnetic

513-907 (inch) 513-402: Dial test indicator 7014E: Mini magnetic

accurate measurement of narrow or recessed areas, plus inside

No-clutch structure for automatic reversal of measuring

Resistant to water and dust thanks to the one-piece bezel and

2 Optional Accessories : : Holding bar : Stem : points Special Set: No (mm) E: Dial test indicator 7014: Mini magnetic stand No (inch) : Dial test indicator 7014E: Mini magnetic stand Dial Test s SERIES 513 Horizontal Type Performs easy and accurate measurement of narrow or recessed areas, plus inside and outside diameters that dial indicators cannot access. No-clutch structure for automatic reversal of measuring direction. Resistant to water and dust thanks to the one-piece bezel and "crystal" design with O-ring. The glare-free flat crystal face has a scratch-resistant coating. High-sensitivity and quick-response because of jeweled bearings. A contact point is provided as standard E E E E F-39

Anti-magnet type Double scale spacing type Long contact point type Compact type With revolution counter type Set Configuration: Test s (900321, for ø4mm, ømm, holding bar (L: 100mm) (900209)

2N or less 36. 4 4 4 4 0.01mm 513-466E 0.5mm 5µm 0-25-0 0.3N or less 22.3 4 4 4 4 0.01mm 513-404E 513-404T 0.mm µm 0-40-0 0.3N or less 20.9 4 4 0.01mm 513-474E* 0.mm µm 0-40-0 0.3N or less 20.9 4 4 0.01mm 513-464E 0.

3 Anti-magnet type Double scale spacing type Long contact point type Compact type With revolution counter type Set Configuration: Test s (900321, for ø4mm, ømm, holding bar (L: 100mm) (900209) SPECIFICATIONS DIMENSIONS AND MASS 0. L E E L (mm) 0.01mm E T 0.5mm 5µm N or less mm E T 0.5mm 10µm N or less mm E 0.5mm 5µm N or less mm E T 0.mm µm N or less mm E* 0.mm µm N or less mm E 0.mm µm N or less mm E T 1mm 10µm N or less mm E 1.5mm µm N or less mm E T 0.2mm 3µm N or less mm E 0.2mm 3µm N or less mm E 0.6mm 6µm N or less mm E 0.14mm 3µm N or less *provided with a ø2mm ruby contact point as a substitute for ø2mm contact point. L (mm) T.03 ± N or less T.03 ± N or less ± N or less T.00 ± N or less ± N or less /inch Range 0.002mm, T 0.2mm, / Range.0005, T.03, 0.01mm 0.7mm Accuracy 3µm Accuracy Dial reading , Dial reading ± , Unit: mm ( ) Compact Type Measuring force L (mm) 0.3N or less Measuring force L (mm) 0.3N or less Set Configuration: Test s ø1mm.039" DIA. (900322, for.157" DIA., 3/" DIA., ø3mm ø2mm ø4mm (19031) (Set No ) ømm.11" DIA..157" DIA. (19031) holding bar (L: 4") (900306).079" DIA. ø40 (ø2) /" DIA. (Set No ) Mass: 42g (39g) F-40

4 Dial Test s SERIES 513 Horizontal (20 Tilted Face), Vertical, and Parallel Types Specially designed for easy viewing of measurements E The dial face obliquely faces upward, allowing users to read the graduations from the user's side. It is convenient when measuring on the side of a large workpiece and the workbench is high. Using the universal holder allows easy hole centering. The dial face always faces upward when the indicator is rotated, which makes reading easy E G E GE E E E Optional Accessories : : Holding bar : Stem : points G F-41

5 SPECIFICATIONS Horizontal (20 tilted face) type 0.01mm E T 1.6mm 10µm N or less mm E T 0.4mm 5µm N or less Anti-magnet type With revolution counter type Horizontal (20 tilted face) type Dial reading Measuring force Mass (g) L (mm) Long contact point type Remarks T.06 ± N or less T ± N or less Blue dial T ± N or less Black dial T.06 ± N or less T ± N or less Black dial T.016 ± N or less T ± N or less Black dial Vertical type 0.01mm E T 0.mm µm N or less mm E T 0.2mm 3µm N or less Set Configuration: (900321, for ø4mm, ømm, ø1mm ø3mm holding bar (L: 100mm) (900209) ø2mm ø4mm (19031) Vertical type T.03 ± N or less T.00 ± N or less ømm (Set No ) Parallel type 0.01mm GE GT 0.mm µm N or less Parallel type G GT.03 ± N or less Set Configuration:.039" DIA..11" DIA..157" DIA. (19031) DIMENSIONS Horizontal (20 Tilted Face) Type L 59 Vertical Type 60. Parallel Type 1 ø unit: mm (900322, for.157" DIA., 3/" DIA., holding bar (L: 4") (900306) ø ø " DIA L /" DIA. (Set No ) L F-42

6 Pocket Type Dial Test s SERIES 513 Jeweled bearings assure higher sensitivity and accuracy. Reversible measuring direction. Two holding bars are supplied. (s only.) Fully adjustable bezel/dial face. point is adjustable within 220. Bezel is sealed with on O-ring to keep out water / oil E E E E E E T E T E E E Optional Accessories : : Holding bar : Stem : points F-43

7 Long contact point type SPECIFICATIONS Compact type L (mm) 0.01mm E T 0.5mm 10µm N or less mm E T 0.mm µm N or less mm E T 0.mm µm N or less mm T 1mm 10µm N or less mm E T 0.2mm 3µm N or less mm E T 0.14mm 3µm N or less 12 4 Set Configuration: (900321, for ø4mm, ømm, holding bar (L: 100mm) (900209) ø4mm (102036) ømm holding rod (900211) L (mm) T.04 ± N or less T.04 ± N or less T.02 ± N or less T.01 ± N or less ø2mm ømm (10222) Optional Points Pocket Type 1mm 2mm 3mm 0.5mm 0.7mm E E E E T E DIMENSIONS AND MASS unit: mm Set Configuration:.039" DIA. holding bar (L: 4 ) (900306) Spanner (301336).11" DIA..157" DIA. (102036) (900322, for.157" DIA., 3/" DIA., (33) ø33 (ø2) 17 ( ): Compact Type ø9.5 ø.315 DIA holding rod (900211).079" DIA. 24 L 46 (29) Mass: 45g (40g) ( ): Compact Type Spanner (301336) 3/" DIA. (10201) F-44

Set Configuration: ø1mm (10224) ø3mm (10226) ø4mm, 900321 (for ø4mm stem, ømm stem, holding bar (L: 100mm) (900909) Dial Test s SERIES 513 Universal Type Universal application to all directions.

8 Set Configuration: ø1mm (10224) ø3mm (10226) ø4mm, (for ø4mm stem, ømm stem, holding bar (L: 100mm) (900909) Dial Test s SERIES 513 Universal Type Universal application to all directions. (Not only the direction of the measuring but also the direction of measurement itself can be adjusted 360 degrees without moving the indicator.) Carbide contact ø2mm (10225) ømm stem (Set No ) Spanner (102037) Set Configuration:.039 DIA. carbaide (10224).11 DIA. (10226) Carbide contact.079 DIA. (10225).157 DIA. (19031) Optional Accessories : : Holding bar : Stem Swivel Clamp (for.157 DIA stem, 3/" DIA. stem, Spanner (102037) holding bar (L: 4 ) (900306) same size 3/" DIA. stem (Set No ) SPECIFICATIONS 0.01mm GE GT 0.mm µm N or less 4 DIMENSIONS AND MASS 24 (22.9) GE G GT.03 ± N or less 4 ø Unit: mm Mass: 0g ( ): G F-45

9 Points and Clamp Holders Optional Accessories for Dial Test Points 1mm 2mm 3mm 0.5mm 0.7mm E 21CZA044 21CZA036 21CZA E E E E E E E E E GE E E E E E G Holding Bars Centering Holder Allows large diameter cylinders or holes to be centered. 9 x 9mm (Length: 50mm) (Length: 100mm) ømm (.25 dia.) ømm (Length: 115mm).25 x.5" (Length: 2") (Length: 4") Universal Holder Allows the indicator to be set at a desired position (ømm stem) (.25" DIA. stem) Universal Holder (pocket type) Since the Dial Test can be swiveled to a desired angle, the holder is useful for centering workpieces and installing workpieces on a milling machine (ømm stem, Length: 0mm) (.25" DIA. stem, Length: 3 ) (ø6mm stem, Length: 0mm) Universal holder (ømm stem, Length: 4mm) (.25" DIA. stem, Length: 4mm) (ø6mm stem, Length: 4mm) Universal holder F-46

Dial Test Indicators Comparison measuring instruments which ensure high quality, high accuracy and reliability.

Dial Test Indicators Comparison measuring instruments which ensure high quality, high accuracy and reliability. Dial Test s Comparison measuring instruments which ensure high quality, high accuracy and reliability. SERIES 513 Lever-Type Dial s eature icons Designed to probe surfaces that cannot be reached with a