ZF Maschinenantriebe GmbH Industrial Drives. Planetary gearboxes Economy Series for Servomotors

Size: px
Start display at page:

Download "ZF Maschinenantriebe GmbH Industrial Drives. Planetary gearboxes Economy Series for Servomotors"

Transcription

1 ZF Maschinenantriebe GmbH Industrial rives Planetary gearboxes Economy Series for Servomotors

2 2 ZF-uoplan 2K Two-speed Gearboxes ZF-Ecolift Elevator Gearboxes ZF-Servoplan G ompact Gearbox ZF-Tiratron Hysteresis rakes ustomer specific Gearboxes ZF-Servoplan PG Servogearboxes ZF-Servoplan WT Right ngle gearboxes

3 Precision in movement The ZF Maschinenantriebe GmbH is able to offer you a wide range of machine drives, brakes and clutches for applications in engineering as well as customer specific drive solutions. ZF-Servoplan Servogearboxes Economy Our development and production activities are focused on servo-assisted drives for automation engineering, two-speed drive gearboxes for machine tools as well as customer-specific drives, such as for printing machines, robot applications and elevator gearboxes. Our innovative standard products range from low backlash servogearboxes (ZF-Servoplan), and robust two-speed gearboxes (ZF- uoplan) to hysteresis clutches and brakes for non-contact web control (ZF-Tiratron).

4 Servogearboxes The ZF-Servoplan planetary gearbox Economy series has been designed for direct mounting onto servomotors. The available wide range of sizes and the use of a modular system allows the application in almost any field of automation. Principle of Operation The combination of servomotors with ZF-Servoplan planetary gearboxes constitutes a coaxial drive unit. The servomotor output shaft is connected to the sun gear of the gearbox by using a compression coupling. The sun gear drives three planetary gears inside the planetary carrier, which rotate inside the internal ring gear. We feature a compact design with high power density thanks to equal force distribution among three planetary gears and robust performance due in part to hardened gears. lso available from ZF Maschinenantriebe GmbH: Low backlash high precision right angle (ZF-Servoplan WT series) and planetary (ZF-Servoplan PG series) gearboxes.

5

6 Planetary Gearboxes 6 1. Easy motor mounting with modular adapter flange system. 2. Our input pilot ensures proper gearbox alignment to motor shaft, preventing shortened bearing life due to improper preloading.. High flexibility by using proven input coupling system.. Motor shaft / gearbox connection with compression coupling, ensuring a slip free and non-wearing power transmission.. Integrated axial length compensation system absorbing thermal growth of motor shaft. 6. High efficiency and low running noise thanks to high gearing quality, cageless needle bearings in planetary gears and high-grade lubricant.. High torsional rigidity and acceleration torques permitted due to robust design and optimized gearing geometry. 8. Six available gearbox sizes for output torques from to 80 Nm.. vailable ratios from i = to 00.. Maintenance free with lifetime grease lubrication. 11. For use in any installation position.

7 1 2 6

8 Planetary Gearbox, one-stage Size: T echnical ata: Reducion Ratio i: 12/1 2/1 0/1 0/1 200/1 00/1 Nominal output torque relating to n 1 = 000 [rpm] Emergency stop torque 1) T 2N [Nm] T 2Not [Nm] / * / * -.. * * Max. acceleration torque 2) T 2 [Nm] / * * Max. input speed n 1Max [rpm],,, / * Nominal input speed n 1N [rpm],,, / * acklash [arcmin] Torsional rigidity t [Nm/arcmin] Moments of inertia ) Moments of inertia ) I 1 [kg cm 2 ] I 1 [kg cm 2 ] * * Ø 6 Ø Ø 11 6 Ø Ø 6 Ø Ø 6 Ø Ø 2 6 Ø Ø 2 Max. axial force F [N] Max. radial force ) F R [N] Lifetime L h [h] Efficiency Weight ca. m [kg] 6% 0. % 6% 6% 6% 6% Operating noise at n an = 000 [rpm] L p [d()] Lubrication: Surface protection Installation position Operating temperature irection of rotation egree of protection Lifetime grease lubrication, closed system Steel housing, galvanically treated. luminum flanges. ny, including variable orientation. - to + 0 same as input IP 6 1) Max. 00 times during gearbox lifetime. 2) t a maximum of 00 cycles per hour. Percentage of the overall running time less than % and duration of the impulse under 0. sec. ) dependent on motor shaft diameter (see 6). ) Resultant force middle of output shaft at output speed 0 rpm. * for 12/1 i = all others i = Printed in bold letters: Shorter delivery time.

9 imensions [m m]: Size: 12/1 2/1 0/1 0/1 200/1 00/1 R M M M M M20 t1 12, (h) (k6) M M M8 M M *(F6) min. max *,8*,* daptations available for all common servomotors, dimensions are variable *imensions depending on motor. Please use page 1 for inquiries and orders. L1 12, L L L L6 min max. 26 0, L*,, 6, 6, L L1* min L L1 2 2, L L1 11,2 22, L22*,, 6, 8, 8,

10 Planetary Gearbox, two-stage Size: T echnical ata: Reducion Ratio i: 12/2 2/2 0/2 0/2 200/2 00/2 Nominal output torque relating to n 1 = 000 [rpm] Emergency stop torque 1) Max. acceleration torque 2) Max. input speed Nominal input speed acklash Torsional rigidity Moments of inertia ) Max. axial force Ṁax. radial force ) Lifetime Efficiency Weight ca. Operating noise at n an = 000 [rpm] Lubrication: Surface protection Installation position Operating temperature irection of rotation egree of protection T 2N [Nm] T 2Not [Nm] T 2 [Nm] n 1Max [rpm] n 1N [rpm] [arcmin] t [Nm/arcmin] I 1 [kg cm 2 ] Moments of inertia ) I 1 [kg cm 2 ] F F R L h m L p [N] [N] [h] [kg] [d()] / * / * / * , 1,, 20, 2,,, 0 / * 0, 0, 0 12, 1,, 20, 2,,, 0 / * 0, 0, * * * * * Ø 6 Ø Ø 11 6 Ø % % % % % % Lifetime grease lubrication, closed system Steel housing, galvanically treated. luminum flanges. ny, including variable orientation. - to + 0 same as input IP Ø 6 Ø Ø 6 Ø Ø 2 6 Ø Ø 2 1) Max. 00 times during gearbox lifetime. 2) t a maximum of 00 cycles per hour. Percentage of the overall running time less than % and duration of the impulse under 0. sec. ) dependent on motor shaft diameter (see 6). ) Resultant force middle of output shaft at output speed 0 rpm. * for 12/1 i = all others i =0 Printed in bold letters: Shorter delivery time.

11 Size: *imensions depending on motor. Please use page 1 for inquiries and orders. imensions [m m]: 12/2 2/2 0/2 0/2 200/2 00/2 R M M M M M20 t (h) (k6) M M M8 M M *(F6) min. max *,8*,* daptations available for all common servomotors, dimensions are variable L L L L L6 min max L* L L1* min L L L L L22* L L1 L 6 max. L1 t1 L1 8 R IN 2 L2 L12 L L1 L L22 L L6 max. 2 1

12 12 Planetary Gearbox, three-stage T echnical ata: Nominal output torque relating to n 1 = 000 [rpm] Emergency stop torque 1) Max. acceleration torque 2) Max. input speed Nominal input speed acklash Torsional rigidity Moments of inertia ) Max. axial force Max. radial force ) Lifetime Efficiency Weight ca. Operating noise at n an = 000 [rpm] Lubrication: Surface protection Installation position Operating temperature irection of rotation egree of protection T 2N F F R L h m L p [Nm] T 2Not [Nm] T 2 [Nm] n 1Max [rpm] n 1N [rpm] [arcmin] t [Nm/arcmin] I 1 [kg cm 2 ] [N] [N] [h] [kg] [d()] Reducion Ratio i: 6, 80, , , 80, , , 80, , , , 0, , , 0, , 80, 0, 0, 1, 2, Size: 12/ / / / / / Ø Ø Ø % 0% 0% 0% 0% 0% Lifetime grease lubrication, closed system Steel housing, galvanically treated. luminum flanges. ny, including variable orientation. - to + 0 same as input IP 6 6 Ø 6 Ø Ø 2 1) Max. 00 times during gearbox lifetime. 2) t a maximum of 00 cycles per hour. Percentage of the overall running time less than % and duration of the impulse under 0. sec. ) dependent on motor shaft diameter (see 6). ) Resultant force middle of output shaft at output speed 0 rpm.

13 *imensions depending on motor. Please use page 1 for inquiries and orders. imensions [m m]: Size: 12/ 2/ 0/ 0/ 200/ 00/ R M M M M M20 t (h) (k6) M M M8 M M *(F6) min. max *,8*,* daptations available for all common servomotors, dimensions are variable L L L L L6 min max L* L L1* min L L L L L22*

14 Permitted shaft loads The permissible axial or radial shaft loads are based on nominal bearing lifetime, see diagrams below. The application point of the resultant forces is at middle of output shaft. The values for F R do not take any axial loads into account. For cases with combined axial and radial forces, the force values are reduced. FR x F L2 If the radial force F R acts on the output shaft outside its centre, the permissible force values are reduced L (x > 2 L ) or increased (x< 2 ), 2 2 respectively. F orce (load) application points on gearbox output shaft F = permitted axial force F R = permitted radial force x = distance egree of protection The degree of protection is defined by the designation IP (International Protection corresponding EN 602) and two digits. For our gearboxes the designation is IP 6. The first digit designates the degree of protection against contact (screen protection) and penetration of foreign bodies. In this instance, the first digit 6 means: - protection against dust infiltration (dust-tight) - complete screen protection. The second digit designates the degree of protection against water. In this instance, the digit means: - protection against spray water from all directions. earing Lifetime in Relation to Output Speed and Radial Force 12 output shaft bearing assembly 2 output shaft bearing assembly 0 output shaft bearing assembly n 2 n 2 n 2 service life (h) service life (h) service life (h) radial force in centre of shaft (N) n 2 = output speed radial force in centre of shaft (N) n 2 = output speed radial force in centre of shaft (N) n 2 =output speed 0 output shaft bearing assembly 200 output shaft bearing assembly 00 output shaft bearing assembly n 2 n 2 n 2 service life (h) service life (h) service life (h) radial force in centre of shaft (N) n 2 = output speed radial force in centre of shaft (N) n 2 = output speed radial force in centre of shaft (N) n 2 = output speed

15 Gearbox Output Shaft The gearbox output shaft is available in the following designs: Standard: Output shaft with key as per IN 688 sheet 1 (08.68 issue) for keyed shaft-hub connections. This type of connection is suitable for constant direction, where applications, requirements are not as stringent. This connection type requires additional axial fixing of the hub. centering bore with thread is provided on the face end of the gearbox output shaft for this purpose (as per IN 2, sheet 2). Options: fitted with a half key. Plain output shaft on special request. Size: 1 12/1 12/2 12/ 2/1 2/2 2/ 0/1 0/2 0/ 0/1 0/2 0/ 200/1 200/2 200/ 00/1 00/2 00/ Thread IN 2 M M M M M20 T [Nm] F V [kn] T = Tightening torque F V = Pretensioning Force

16 onfiguration and Selection Gearbox selection The quickest and most reliable method, to determine the appropriate gearbox size for a specific application, is a comparison of motor peak torque with gearbox datas. pplications are differentiated based on norm EN as to continuous duty (S1) or intermittent cyclic duty (S/S). For intermittent cyclic duties the maximum motor acceleration torque is relevant, whereas for continuous duties motor nominal torque is used. In case the motor peak torque exceeds the permitted gearbox values, a calculation based on the actual application specific torques is required. etermination of switch-on time (E) resp. load cycle duration (EZ) E or EZ as per EN ontinuous duty (S1) yclic duty (S/S) yes E 60% or EZ 20 min. no Motor nominal torque T 1NMot Motor peak acceleration torque T 1Mot etermination of gearbox output nominal torque T 2n = T 1NMot * i Select larger gearbox size or different ratio etermination of gearbox output peak acceleration torque T 2b = T 1Mot * i T 2n T 2N yes no Select larger gearbox size or different ratio no T 2b T 2 Nominal motor speed n 1N yes n 1n n 1N no Maximum motor speed n 1max yes Motor shaft diameter Mot no n 1max n 1Max yes Motor shaft diameter Mot 6min mot 6max yes no no 6min mot 6max i from catalogue T 2N from catalogue yes T 2 from catalogue 1) T 1Mot motor data Gearbox selection completed T 1NMot motor data 1) For nos. of cycles 00 cycles per hour, and percentage of total running time % and duration of impulse less than 0. sec. n 1n motor data n 1N from catalogue n 1max motor data n 1Max from catalogue

17 Quotation Request: Kindly fill out below questionnaire for speedy processing and send to: Fax: ++/(0)1/-0 or c1 s1 e1 f d1 b2 Motor data: Motor manufacturer: Type: Motor shaft diameter d1 [mm]: Flange face distance b1 [mm]: Motor shaft length b2 [mm]: b1 z1 Pilot diameter z1 [mm]: Pcd diameter e1 [mm]: 1 Fixing hole diameter s1 [mm]: Flange square f [mm] Motor nominal torque [Nm]: Motor maximum torque [Nm]: Gearbox data: ZF-Servoplan size: - ZF-Servoplan ratio [i]: Keyed output shaft (yes/no): Ordering type code (see page 1): asis of quotation (batch size): Projected annual volume: Subject to technical change without notice. For studies, please request installation drawings; only the data contained therein is binding. Please refer also to our homepage: industrial-drives.zf.com

18 Ordering Type ode P G E Size 12/1, 12/2, 12/ 2/1, 2/2, 2/ 0/1, 0/2, 0/ 0/1, 0/2, 0/ 200/1, 200/2, 200/ 00/1, 00/2, 00/ Size [mm] Size ode Motor Shaft ode E F G H I E F G H E F G H E F E Size L6 min [mm] [mm] [mm] [mm] M M M M M M M 1.0 M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M8 M L6 max [mm] [mm] L L Flange- ode E F G H I J K E F G H I J K L M N O P Q R S T U V W X E F G H I J K M N O P R S T U V W acklash Standard Output shaft Plain Keyed i * ** * * ** 0* 0* 0 Version 0 Ratio ode acklash ode Form ode 0 1 *Not for 12 ** Only for 12

19 Ordering Type ode P G E Size 12/1, 12/2, 12/ 2/1, 2/2, 2/ 0/1, 0/2, 0/ 0/1, 0/2, 0/ 200/1, 200/2, 200/ 00/1, 00/2, 00/ Size [mm] Motor Shaft ode E F G H I E F G H E F G H E F E Size ode Size L6 min L6 max L L22 [mm] [mm] [mm] [mm] [mm] [mm] M M M M M M M M M M M M8 M8 M8 M8 M8 M8 M M M12 M M8 M8 M M12 M12 M M M12 M12 M Flange- ode E F G H I J K L M N O P Q R E F G H I J K E F G H I J acklash Standard Output shaft Plain Keyed i * ** * * ** 0* 0* 0 Version 0 Ratio ode acklash ode Form ode 0 1 *Not for 12 ** Only for 12

20 ZF Maschinenantriebe GmbH Ehlersstrasse Friedrichshafen/Germany Telefon: +(0)1--0 Telefax: +(0) industrial-drives@zf.com Internet: Sheet No.: c Subject to technical change without notice. For studies, please request installation drawings; only the data contained therein is binding.

APEX DYNAMICS, INC. Staianless

APEX DYNAMICS, INC. Staianless APEX DYNAMICS, INC. HIGH PRECISION PLANETARY GEARBOXES AE / AER Series Staianless High precision high speed planetary gearboxes AE / AER series Apex Dynamics, Inc. is the world s most productive manufacturer

More information

Lexium integrated drives

Lexium integrated drives Presentation GBX planetary gearbox Presentation In many cases the axis controller requires the use of a planetary gearbox for adjustment of speed of rotation and torque; the accuracy required by the application

More information

AE / AER Series. AER Series

AE / AER Series. AER Series AE / AER Series Characteristic Highlights True helical gear design Precision helical gearing increases tooth to tooth contact ratio by over % vs spur gearing. The helix angle produces smooth and quiet

More information

APEX DYNAMICS, INC. Staianless

APEX DYNAMICS, INC. Staianless APE DYNAMICS, INC. HIGH PRECISION HIGH SPEED PLANETARY GEARBOES AF / AFR Series Staianless High precision high speed planetary gearboxes AF / AFR series Apex Dynamics, Inc. is the world s most productive

More information

HPG xxx 030 C1 C2 C3. High performance angle gearboxes. Output. Input. Drawings. C with option motor flange. View x. Centering View y.

HPG xxx 030 C1 C2 C3. High performance angle gearboxes. Output. Input. Drawings. C with option motor flange. View x. Centering View y. HPG 030 1 2 3 Input Output 1 View M6 ( deep) 0 Ø4 H (2.2 deep) 18.0 M6 ( deep) 0 2 3 M6 ( deep) 2 13.0 4 2.0 18.0 24.0 M Ø12 k6 6 M6 ( deep) M6 ( deep) 3 Eample HPG 030 2 with option motor flange 0 M6

More information

Precision Ball Screw/Spline

Precision Ball Screw/Spline 58-2E Models BNS-A, BNS, NS-A and NS Seal Outer ring Shim plate Seal Spline nut Seal Collar Shim plate Seal End cap Ball Outer ring Ball screw nut Outer ring Ball Retainer Retainer Outer ring Point of

More information

Backlash-free Torque Limiting Clutches

Backlash-free Torque Limiting Clutches ES -Compact Backlash-free Torque Limiting Clutches www..de Instant separation on overload Permanent backlash-free torque transmission Readable torque adjustment Synchronous, ratchetting and overload designs

More information

Product description. Compact Modules. Characteristic features. Further highlights

Product description. Compact Modules. Characteristic features. Further highlights 4 Compact Modules Product description Characteristic features Five fine-tuned sizes based on a compact precision aluminum profile with two integrated pre-tensioned ball rail systems Identical external

More information

ElectroMechanical Cylinder LEMC

ElectroMechanical Cylinder LEMC www.lmotion.ru lmotionmail@ya.ru.: (9)9160 ElectroMechanical Cylinder LEMC THE POWER OF KNOWLEDGE ENGINEERING www.lmotion.ru lmotionmail@ya.ru.: (9)9160 ElectroMechanical Cylinder LEMC enefits High efficiency

More information

ElectroMechanical Cylinder LEMC

ElectroMechanical Cylinder LEMC ElectroMechanical Cylinder EMC ElectroMechanical Cylinder EMC enefits High eficiency ong service life from use of SKF planetary roller screw Compact and robust structural design Modular concept with multiple

More information

Linear guide drives. Synchronous shafts The use of synchronous shafts enables several linear axes to be operated with one drive.

Linear guide drives. Synchronous shafts The use of synchronous shafts enables several linear axes to be operated with one drive. Linear guide drives Drive concept The linear guides are driven via the hollow shaft in the drive head. The drive head is used to directly install a motor or alternatively (in connection with a center shaft)

More information

NR ROTARY RING TABLE: FLEXIBLE IN EVERY RESPECT

NR ROTARY RING TABLE: FLEXIBLE IN EVERY RESPECT NR FREELY PROGRAMMABLE ROTARY TABLES NR ROTARY RING TABLE All NR rings allow customer-specific drive motors to be connected NR ROTARY RING TABLE: FLEXIBLE IN EVERY RESPECT WHEN IT S GOT TO BE EXACT We

More information

UNI EN ISO 9001:2008 UNI EN ISO 14001:2004 BS OHSAS 18001:2007 EC DIRECTIVE 2014/34/EU (ATEX) CERTIFIED MANAGEMENT SYSTEM

UNI EN ISO 9001:2008 UNI EN ISO 14001:2004 BS OHSAS 18001:2007 EC DIRECTIVE 2014/34/EU (ATEX) CERTIFIED MANAGEMENT SYSTEM EN ISM-BSM CERTIFIED Technology Made in Italy Since 1955 the Varvel Group has been making speed reducers and variators for light industry applications. Reliable partner in power transmission equipment

More information

Variable Displacement Plug-In Motor A6VE. Series 6, for open and closed circuits Axial tapered piston, bent axis design

Variable Displacement Plug-In Motor A6VE. Series 6, for open and closed circuits Axial tapered piston, bent axis design rueninghaus Hydromatik Series 6, for open and closed circuits xial tapered piston, bent axis design Size 28...20 Nom. pressure up to 400 bar Peak pressure up to 40 bar RE 9606/0.97 RE 9606/0.97 replaces

More information

H a r m o n i c P l a n e t a r y

H a r m o n i c P l a n e t a r y H a r m o n i c P l a n e t a r y HPG Series Planetary Gearhead Total Motion Control P r e c i s i o n G e a r i n g & M o t i o n C o n t r o l Harmonic Drive LLC is the world s largest manufacturer of

More information

Identification system for short product names. Changes/amendments at a glance. 2 Bosch Rexroth AG OBB omega modules R ( )

Identification system for short product names. Changes/amendments at a glance. 2 Bosch Rexroth AG OBB omega modules R ( ) Omega Modules OBB 2 OBB omega modules R9990079 (206-05) Identification system for short product names Short product name Example: O B B - 085 - N N - System = Omega module Guideway = Ball Rail System Drive

More information

T20WN. Data Sheet. Torque transducers. Special features. Installation example with bellows couplings. B en

T20WN. Data Sheet. Torque transducers. Special features. Installation example with bellows couplings. B en T20WN Torque transducers Data Sheet Special features - Nominal (rated) torques 0.1 N m, 0.2 N m, 0. N m, 1 N m, 2 N m, N m, 10 N m, 20 N m, 0 N m, 100 N m, 200 N m - Accuracy class: 0.2 - Contactless transmission

More information

Product Description. Further highlights. Outstanding features. 4 Bosch Rexroth Corporation Miniature Linear Modules R310A 2418 (2009.

Product Description. Further highlights. Outstanding features. 4 Bosch Rexroth Corporation Miniature Linear Modules R310A 2418 (2009. 4 Bosch Rexroth orporation Miniature Linear Modules R310A 2418 (2009.05) Product Description Outstanding features Rexroth Miniature Linear Modules are precise, ready-to-install linear motion systems that

More information

The perfect Torque Limiting Clutch for

The perfect Torque Limiting Clutch for The perfect Torque Limiting Clutch for Machine Tools Packaging Machinery Printing and Paper Machinery Automated Systems Power Transmission compact, backlash-free torque limiting clutch Immediate disengagement

More information

Digital AC Motors MHD

Digital AC Motors MHD Digital AC Motors MHD090 8-1 8 MHD090 8.1 Technical Data Description Symbol Unit MHD090B-035 Type of cooling Natural Natural Surface Liquid Motor overtemperature 60 K 100 K 60 K/100 K 60 K/100 K Electric

More information

High Performance Angle Gearboxes

High Performance Angle Gearboxes High ngle Gearboes M ( deep) M ( deep) 0 0 0 0 0 deep) Ø. 7 Welcome to our full revised catalog, featuring our current range of high-performance angle gearboes. We are delighted at our interest, and to

More information

CTV series CHARACTERISTICS LINEAR UNITS

CTV series CHARACTERISTICS LINEAR UNITS CTV series CHARACTERISTICS The CTV series describes s with a precision ball screw drive and two parallel, integrated, Zerobacklash rail guides. Compact dimensions allow high performance features such as,

More information

R-Plus System Frontespizio_R_PlusSystem.indd 1 11/06/ :32:02

R-Plus System Frontespizio_R_PlusSystem.indd 1 11/06/ :32:02 R-Plus System R-Plus System R-Plus system R-Plus system description Fig. R-Plus system R-Plus System is Rollon s series of rack & pinion driven actuators. Rollon R-Plus System series linear units are designed

More information

Rotary modules.

Rotary modules. Rotary modules www.comoso.com www.comoso.com Rotary modules ROTARY MODULES Series Size Page Rotary modules RM swivel unit 156 RM 08 160 RM 10 162 RM 12 164 RM 15 168 RM 21 172 RM rotor 176 RM 50 180 RM

More information

Drive Units with Ball Screw Drives R310EN 3304 ( ) The Drive & Control Company

Drive Units with Ball Screw Drives R310EN 3304 ( ) The Drive & Control Company Drive Units with Ball Screw Drives R310EN 3304 (2007.05) The Drive & Control Company Linear Motion and Assembly Technologies Ball Rail Systems Roller Rail Systems Linear Bushings and Shafts Precision Ball

More information

Load Washers. Force. for Forces of 7, kn. F z. Type 9001A A 9081B, 9091B

Load Washers. Force. for Forces of 7, kn. F z. Type 9001A A 9081B, 9091B Force Load Washers for Forces of 7,5... 1 200 kn Type 9001A... 9071A 9081B, 9091B 1-component force sensor for measuring dynamic and quasistatic forces in z direction. F z Calibrated measuring range 100

More information

TwinCAT Motion Designer Report. Project Name: TwinCAT Motion Designer Project1. Customer. Application Engineer. Project Description

TwinCAT Motion Designer Report. Project Name: TwinCAT Motion Designer Project1. Customer. Application Engineer. Project Description TwinCAT Motion Designer Report Project Name: Customer Company: Name: Department: Street: City: Country: Application Engineer Company: Name: Department: Street: City: Country: Project Description Exclusion

More information

ROTARY MOTION CONTROL

ROTARY MOTION CONTROL ROTARY MOTION CONTROL Technical Data Sheet Nexen Mechanical Torque Limiter Family PMT / PMK / PMC 2TC 2CC ECC PCC Mechanical Torque Limiter The trend in industry is to design and incorporate more automation

More information

Servomotors Order Catalog. LSP-Servomotors with optional planetary gearbox Stall torque 0.18 to 110 Nm

Servomotors Order Catalog. LSP-Servomotors with optional planetary gearbox Stall torque 0.18 to 110 Nm Servomotors Order Catalog LSP-Servomotors with optional planetary gearbox Stall torque 0.8 to 0 Nm Order Catalogue LSP Servomotors ID no.: 08.8B.-0 Date: 0/07 Subject to technical change without notice.

More information

Modular System for Planetary Gears

Modular System for Planetary Gears : www.imsgear.com IMS Gear GmbH Technomotive : 0/00 : Technical www.designconcepts.de Modular System for Planetary Gears Ø to 0 mm 0. to 00 Nm Plastic and metal Low-noise Our planetary gearbox catalogue

More information

Compendium Screw Jacks

Compendium Screw Jacks Compendium Screw Jacks Screw Jack Technology Overview of chapters Useful information Project planning Screw jacks Bevel gear boxes Lifting screw protective covers Couplings and connecting shafts Accessories

More information

LINE TECH Linear Modules. Ready to built-in linear modules with drive

LINE TECH Linear Modules. Ready to built-in linear modules with drive Ready to built-in linear modules with drive Anodized profile, produced in extrusion molding method Linear rail guiding system (LM3 LM5) Actuation by ball screw, high-helix lead _ screw or toothed belt

More information

Backlash-free Safety Couplings. pioneer in innovation

Backlash-free Safety Couplings. pioneer in innovation Backlashfree Safety Couplings pioneer in innovation T h e m o d u l a r s y s t e m s a t i s f i e s a l l y o u r w i s h e s! Edition 8/007 G E R W A H T h e C o m p a n y GERWAH GmbH was founded in

More information

BEARINGS Pillow Blocks

BEARINGS Pillow Blocks The bearing size is usually selected according to the required bearing life and reliability under a specified type of load charged on the bearing. The load applied to the bearing operating under a static

More information

Cam Roller Guides. The Drive and Control Company. Service Automation. Electric Drives and Controls. Linear Motion and Assembly Technologies

Cam Roller Guides. The Drive and Control Company. Service Automation. Electric Drives and Controls. Linear Motion and Assembly Technologies Industrial Hydraulics Electric Drives and Controls Linear Motion and Assembly Technologies Pneumatics Service Automation Mobile Hydraulics Cam Roller Guides The Drive and Control Company Linear Motion

More information

Load Washers. Force kn until kn. Type 9101A A

Load Washers. Force kn until kn. Type 9101A A Force Load Washers 0... 20 kn until 0... 700 kn Type 9101A... 9107A Force sensor for measuring quasistatic and dynamic forces in industrial monitoring tasks. F z The force sensors are delivered uncalibrated

More information

External gear pump Type G3, Series 3X

External gear pump Type G3, Series 3X NS to 5 External gear pump Type G3, Series 3X Up to 2 bar Up to 5.2 cm 3 RE 039/07.00 Replaces: 03.00 Plain bearings for high loads Mono-block bearing New principle of hydrostatic gap compensation Drive

More information

R310EN 2403 ( ) The Drive & Control Company

R310EN 2403 ( ) The Drive & Control Company Feed Modules VKK R310EN 2403 (2008.09) The Drive & Control Company Linear Motion and Assembly Technologies Ball Rail Systems Roller Rail Systems Linear Bushings and Shafts Ball Screw Drives Linear Motion

More information

Points. Precision Positioning Table TU. Variation. Major product specifications With flange

Points. Precision Positioning Table TU. Variation. Major product specifications With flange 9 0 Precision Positioning Table Ball screw inear Points lide table with high accuracy and high rigidity in a single structure lide table Compact and slim type positioning table with an original U-shaped

More information

Our classic for extreme parallel offset: Standard S series. The Schmidt-Kupplung compensates variable parallel Symbiosis of performance, com-

Our classic for extreme parallel offset: Standard S series. The Schmidt-Kupplung compensates variable parallel Symbiosis of performance, com- Schmidt-Kupplung Power Plus SK_PP_/0 The Schmidt-Kupplung series Schmidt-Kupplung Our classic for extreme parallel offset: Standard S series The Schmidt-Kupplung compensates variable parallel Symbiosis

More information

Absolute encoders multiturn

Absolute encoders multiturn elektronischer electronic multiturn, Multiturn, magnetic magnetisch Sendix M66 / M68 (shaft / hollow shaft) The Sendix M6 with Energy Harvesting Technology is an electronic multiturn encoder in miniature

More information

Advantages of Variable Frequency Drive Technology for Face Conveyor and Plow Systems in Longwall Mining

Advantages of Variable Frequency Drive Technology for Face Conveyor and Plow Systems in Longwall Mining Advantages of Variable Frequency Drive Technology for Face Conveyor and Plow Systems in Longwall Mining Andreas Johannes Westphalen Caterpillar Global Mining Table of Contents Abstract Abstract... 3 Introduction...

More information

CONTENTS INDEX P. 2 P. 3-4 PRODUCT FEATURES P. 5-6 PRODUCT STRUCTURE P. 7-8 PRODUCT APPLICATIONS PRODUCT SELECTION P P. 11 MODEL LIST P.

CONTENTS INDEX P. 2 P. 3-4 PRODUCT FEATURES P. 5-6 PRODUCT STRUCTURE P. 7-8 PRODUCT APPLICATIONS PRODUCT SELECTION P P. 11 MODEL LIST P. EMER-FLEX COUPLING CONTENTS INDEX PRODUCT FEATURES PRODUCT STRUCTURE PRODUCT APPLICATIONS PRODUCT SELECTION MODEL LIST NEF-HUB NES Series P. 2 P. 3-4 P. 5-6 P. 7-8 P. 9- P. P. 2 P. 3-4 NEF Series Spacer

More information

Planetary Screw Assemblies PLSA

Planetary Screw Assemblies PLSA Planetary Screw Assemblies PLSA Ernst-Sachs-Straße 100 97424 Schweinfurt Tel. +49 9721 937-0 Fax +49 9721 937-275 www.boschrexroth.com Catalog "Planetary Screw Assemblies PLSA" R310XX 3308 (2014.01) Dear

More information

BSD MODULFLEX R Torsionally Rigid Couplings

BSD MODULFLEX R Torsionally Rigid Couplings BSD MODULFLEX R Torsionally Rigid Couplings for T1F Torque Flange View B Thread opening turned in sectionel plane b b 6 b 7 b 2 b 8 b 3 b za View A A B NVm 1 NVm View A btot Reference dimension X X 2 NVm

More information

Selection of jack size No. 5 Check again with ball screw jack Type J-B. Yes. Set the hand wheel radius if the screw jack is to be used for manual operation. Yes. Yes. Specification Select temporarily the

More information

Backlash-free Safety Couplings

Backlash-free Safety Couplings Backlashfree Safety Couplings You Can Rely On Us! T h e m o d u l a r s y s t e m s a t i s f i e s a l l y o u r w i s h e s! Edition /00 G E R W A H T h e C o m p a n y GERWAH GmbH was founded in 19.

More information

E D D Y C U R R E N T D A M P E R A P P L I C AT I O N D ATA

E D D Y C U R R E N T D A M P E R A P P L I C AT I O N D ATA E D D Y C U R R E N T D A M P E R A P P I C AT I O N D ATA CDA InterCorp CDA InterCorp INTRODUCTION This application manual defines the performance capabilities of CDA InterCorp s Eddy Current Damper Product

More information

Cooling Water Flow Regulator

Cooling Water Flow Regulator Temperature controlled, indirectly and directly actuated diaphragm valves / seat valves Port size G 3/8 to G DN 0 to DN 0 ontinuous regulation High accuracy No auxiliary energy required Technical data

More information

second PLSA line R310EN 3308 ( )

second PLSA line R310EN 3308 ( ) 01_1 Planetary st Headline_36 Screw Assemblies pt/14.4 mm second PLSA line R310EN 3308 (2011-09) 2 Planetary Screw Assemblies PLSA Planetary Screw Assemblies PLSA Product Overview 3 Nuts, Screws, Screw

More information

Dynamic Tests on Ring Shear Apparatus

Dynamic Tests on Ring Shear Apparatus , July 1-3, 2015, London, U.K. Dynamic Tests on Ring Shear Apparatus G. Di Massa Member IAENG, S. Pagano, M. Ramondini Abstract Ring shear apparatus are used to determine the ultimate shear strength of

More information

Improvement in the Design & Manufacturing of Twin Worm Self Locking Technique and applications

Improvement in the Design & Manufacturing of Twin Worm Self Locking Technique and applications Improvement in the Design & Manufacturing of Twin Worm Self Locking Technique and applications Prof. P.B. Kadam 1, Prof. M.R. Todkar 2 1 Assistant Professor, Mechanical Engineering Department, T.K.I.E.T.Warananagar,

More information

Planetary Screw Assemblies PLSA

Planetary Screw Assemblies PLSA Planetary Screw Assemblies PLSA R310EN 3308 (2011-09) The Drive & Control Company C/ Centauro, 13 Área Empresarial Las Cubiertas 28971-Griñón (Madrid) T. 0034 91 126 6627 info@diversiatec.com www.diversiatec.com

More information

US Safety Couplings. Partner for Performance

US Safety Couplings. Partner for Performance US 05 2016 Safety Couplings Partner for Performance www.ringfeder.com Welcome to your system supplier for every aspect of power transmission RINGFEDER POWER TRANSMISSION We say what we mean and mean what

More information

Check-Q-meter. Table of contents. Features. Functions. RE 27551/ /10 Replaces: Type FD

Check-Q-meter. Table of contents. Features. Functions. RE 27551/ /10 Replaces: Type FD Check-Q-meter RE /0.0 /0 Replaces: 09.9 Type FD Nominal size... Series ax. Operating pressure 0 bar ax. Flow 0 l/min K9/ Table of contents Contents Page Features Functions Ordering details Symbols Functional

More information

Couplings. highly-flexible ring coupling

Couplings. highly-flexible ring coupling product catalogue Couplings GKN Stromag TRIR highlyflexible ring coupling GKN Stromag TRIR highlyflexible ring coupling Special designs (see page 27) > TEF...F RR To connect a flywheel or equivalent to

More information

An Investigation into the Effects of Rolling Element Bearing Flexibility in a Wind Turbine Planetary Gearbox

An Investigation into the Effects of Rolling Element Bearing Flexibility in a Wind Turbine Planetary Gearbox An Investigation into the Effects of Rolling Element Bearing Flexibility in a Wind Turbine Planetary Gearbox 20th November 2007 Nawazish Ali Zaidi, Richard Dorling and Andy Poon Romax Technology Limited,

More information

DRS 61: Incremental encoders, number of lines and zero pulse width freely programmable DRS 60: Incremental Encoders with Zero-Pulse-Teach

DRS 61: Incremental encoders, number of lines and zero pulse width freely programmable DRS 60: Incremental Encoders with Zero-Pulse-Teach NEW DRS : Incremental encoders, number of lines and zero pulse width freely programmable DRS : s with Zero-Pulse-Teach Further highlights of this generation of encoders: Simple zero-pulse-teach by pressing

More information

Its modular concept allows to build up a ball valve for any degree of automation and any kind of application

Its modular concept allows to build up a ball valve for any degree of automation and any kind of application Type 2657...59 DN 10 up to 80 mm; Plastic; 2/2 way dvantages/benefits ntegrated pilot valves, position feed-back and limit switches available Customized system solutions with Burkert valves & sensors With

More information

The electronic actuator for future-proof applications

The electronic actuator for future-proof applications Stellantriebe The electronic actuator for future-proof applications Safe Economical Precise www.arisactuators.com Intelligent Line The next generation actuator technology Innovative electronics versus

More information

Actuators with ball monorail guidance system and ball screw drive MKUVE15-KGT, MKUVE20-KGT

Actuators with ball monorail guidance system and ball screw drive MKUVE15-KGT, MKUVE20-KGT Actuators with ball monorail guidance system and ball screw drive MKUVE15-KGT, MKUVE20-KGT Product overview Actuators with ball monorail guidance system and ball screw drive Actuators with ball monorail

More information

BASE. Rotary limit switch. OptiOnS. FEAtuRES. CERtiFiCAtiOnS

BASE. Rotary limit switch. OptiOnS. FEAtuRES. CERtiFiCAtiOnS Rotary limit switch BASE Rotary limit switch used to control and measure the movement of industrial machines. Its compact size make it suitable for use in narrow spaces. FEAtuRES It consists of a gear

More information

Dimensional drawing face mount flange radial. R = bending radius min. 40 mm. Dimensional drawing face mount flange axial

Dimensional drawing face mount flange radial. R = bending radius min. 40 mm. Dimensional drawing face mount flange axial Incremental Encoder DRS/DRS, face mount flange up to 8,2 Dimensional drawing face mount flange radial Incremental Encoder Connector or cable outlet Protection class up to IP s TTL and HTL Zero-Pulse-Teach

More information

Welcome to where precision is. Large Ball Screws Diameter mm

Welcome to where precision is. Large Ball Screws Diameter mm Welcome to where precision is. Large Ball Screws Diameter mm Large Ball Screws Diameter mm This section includes nuts with standard dimensions per ISO 8 / DIN 1. In most cases, there is a choice of three

More information

TSCHAN S US Elastische Kupplungen Flexible Couplings TNS Flexible Couplings. Partner for Performance

TSCHAN S US Elastische Kupplungen Flexible Couplings TNS Flexible Couplings. Partner for Performance US 11 2015 TSCHAN S Elastische Kupplungen Flexible Couplings TNS Flexible Couplings Partner for Performance www.ringfeder.com Welcome to your system supplier for every aspect of power transmission Today

More information

HAWK TECHNOLOGY LTD.

HAWK TECHNOLOGY LTD. Stard Trunnion Line HAWK TECHNOLOGY LTD. Going Beyond Everyday Hawk Technology Ltd has evolved with today's manufacturing requirements by planning, designing, building installing state-of -the-art robotic

More information

4/4-way servo solenoid directional control valves, directly operated, with electrical position feedback and on-board electronics (OBE)

4/4-way servo solenoid directional control valves, directly operated, with electrical position feedback and on-board electronics (OBE) 4/4-way servo solenoid directional control valves, directly operated, with electrical position feedback and on-board electronics (OBE) RE 9035/. Replaces: 05. 1/1 Type 4WRPEH 6 Size 6 Unit series X Maximum

More information

Selection table for guided systems (crank driven)

Selection table for guided systems (crank driven) Selection table for guided systems (crank driven) One mass shaker brute-force system One mass shaker natural frequency system Two mass shaker fast-runner system with reaction force-compensation Single

More information

These two values are determined by the application (see calculation example on pages 52-53).

These two values are determined by the application (see calculation example on pages 52-53). Tension brake sizing Two important parameters are used in brake selecting: Max. torque requirement Max. thermal power to be dissipated These two values are determined by the application (see calculation

More information

VK2 volume flow controller Overview

VK2 volume flow controller Overview New option with sound attenuator Maintenance-free VK2 volume flow controller that operates without an auxiliary power supply, for ventilation and air conditioning systems. Adjustable on site. Outstanding

More information

Tangential Fans Series TW Impeller diameter 150 mm and 200 mm

Tangential Fans Series TW Impeller diameter 150 mm and 200 mm Tangential Fans Series TW Impeller diameter mm and 0 mm 105 Corporate Drive, Suite E Spartanburg, SC 293 PO Box 2889, Spartanburg, SC 294 USA Tel: 864-599-63 Fax: 864-599-6344 e-mail: info@ltg-inc.net

More information

Shaft Locking Devices

Shaft Locking Devices External Shaft ocking evice Available sizes: Page # S 900 Self-centering Exceptional concentricity Suitable for hollow shafts Axial hub position fixe uring clamping etric 14mm to 240mm arger sizes on request

More information

FOUR-POINT CONTACT SLEWING RINGS - without gear [ O ]

FOUR-POINT CONTACT SLEWING RINGS - without gear [ O ] FOUR-POINT CONTACT SLEWING RINGS - without gear [ O ] Number of the Loading Boundary Dimensions Static Ax.Basic Load Rating Designation Weight Abutment Dimensions Curve d D T C oa G J 1 J 2 N 1 N 2 n 1

More information

Gearhead variations M = Motor attachment gearhead S = Separate version. Reduced specification available on request. Gearhead variations.

Gearhead variations M = Motor attachment gearhead S = Separate version. Reduced specification available on request. Gearhead variations. Order information TP + 004 TP + 4000 SP + 060 SP + 240 Type code S = Standard A = Optimized mass moment of inertia b) E = Version in ATEX b) F = Food-grade lubrication b) G = Grease b) L = Low friction

More information

Vane Type Rotary Actuators Series Variations

Vane Type Rotary Actuators Series Variations Vane Type Rotary Actuators Series Variations Vane Type Exterior CRB Series 0,, 0,, CRBU Series 0,, 0,, CRB Series, 6, 80, Has a compact body with exterior dimensions that do not change regardless of the

More information

High-Performance Universal Joint Shafts

High-Performance Universal Joint Shafts High-Performance Universal Joint Shafts Fair. Reliable. Innovative. This is our promise to our customers. And it is the demand we place on ourselves in the Paper, Energy, Mobility and Service markets.

More information

Siemens AG Rated Rated current 1FK7 Compact. I rated (15.4) 11.5 (25.4) (2.9) 3.3 (4.4)

Siemens AG Rated Rated current 1FK7 Compact. I rated (15.4) 11.5 (25.4) (2.9) 3.3 (4.4) Synchronous motors Siemens FK7 Compact motors Nural cooling Selection and ordering da Red speed Shaft height Red Stic torque Red Red FK7 Compact torque ) synchronous motor Nural cooling Number of pole

More information

The basic dynamic load rating C is a statistical number and it is based on 90% of the bearings surviving 50 km of travel carrying the full load.

The basic dynamic load rating C is a statistical number and it is based on 90% of the bearings surviving 50 km of travel carrying the full load. Technical data Load Rating & Life Under normal conditions, the linear rail system can be damaged by metal fatigue as the result of repeated stress. The repeated stress causes flaking of the raceways and

More information

S.C. Rulmenti S.A. Barlad Romania Republicii Street No

S.C. Rulmenti S.A. Barlad Romania Republicii Street No SELECTION OF BEARING SIZE Basic load ratings The size of a bearing is selected considering the load in the used rolling bearing and also depends on the operational rating life and prescribed operating

More information

AC Synchronous Motors

AC Synchronous Motors AC Synchronous Motors A C S Y N C H R O N O U S M O T O R S AC Synchronous Motors Kollmorgen AC synchronous motors are high pole count motors that naturally turn at slower speeds (72 or 60 rpm). at 72

More information

Miniature (SEB Type) Tapped-Hole rail Types: Slide guides with clearance holes are standard and tapped holes are available upon request.

Miniature (SEB Type) Tapped-Hole rail Types: Slide guides with clearance holes are standard and tapped holes are available upon request. Miniature (SE Type) The SE type slide guide is a linear motion bearing in which the ball elements roll along two tracking grooves. This is the smallest and lightest slide guide series offered by Nippon

More information

SKF actuators available for quick delivery. Selection guide

SKF actuators available for quick delivery. Selection guide SKF actuators available for quick delivery Selection guide A wide range of SKF actuators available for quick delivery Industrial actuator 24 Volt DC Load range 1 000 to 4 000 N Speed range 5 to 52 mm/s

More information

ZF 5HP24 Automatic Transmission - Spare Parts Catalog

ZF 5HP24 Automatic Transmission - Spare Parts Catalog Table of Contents 5HP24 Transmission Overview (North American Applications) Make / Model / Model Year 02 5HP24 Technical Information Torque, Gear Ratio & Weight 03 Transmission Oil Reference Guide 03 5HP24

More information

Air Cooler Industry AC-LN 1-7 / ACA-LN 2-7 / ACAF-LN 2-7

Air Cooler Industry AC-LN 1-7 / ACA-LN 2-7 / ACAF-LN 2-7 ir ooler Industry -LN -7 / -LN -7 / F-LN -7 Symbol General The -LN -7 air cooler series can be used in all areas where either oil or water-glycol is to be cooled with air. The coolers with an axial fan

More information

Single Phase Motors Technical Datasheets

Single Phase Motors Technical Datasheets Single Phase Motors Technical Datasheets EN A dynamic, strong and ambitious Group: Orange1 Holding is an international renown Group, one of the most important European manufacturers of single-phase and

More information

Classical Series Timing Belts

Classical Series Timing Belts Classical Series Timing s Classical Series Timing s are manufacture in 5 pitch sizes, X (/5), ( 3 / ), H ( / ), XH ( / ) an XXH ( / 4 ). Stanar stock lengths an withs are shown below, the XH an XXH Series

More information

Lightweight. Geislinger Gesilco

Lightweight. Geislinger Gesilco Lightweight Geislinger Gesilco The Geislinger Gesilco product range is based on more than 20 years of experience in developing fibre composite couplings and shafts. The maintenance-free composite membranes

More information

Engineering Data AC Servo Actuators FHA-C

Engineering Data AC Servo Actuators FHA-C Engineering Data AC Servo Actuators FHA-C QUICKLINK www.harmonicdrive.de/12 Contents 1. General... 3 1.1 Description of Safety Alert Symbols...4 1.2 Disclaimer and Copyright...4 2. Safety and Installation

More information

Clausing Industrial, Inc. Variable Speed 20" Single and Multi-spindle, Belt Drive Industrial Drill Presses

Clausing Industrial, Inc. Variable Speed 20 Single and Multi-spindle, Belt Drive Industrial Drill Presses www.clausing-industrial.com Variable Speed 20" Single and Multi-spindle, Belt Drive Industrial Drill Presses Clausing Industrial, Inc. Two Speed Variable Speeds 150-2000rpm Variable Speeds 200-1300rpm

More information

VERSARAM ELECTROMECHANICAL LINEAR ACTUATORS AND SCREW SUPPORTS

VERSARAM ELECTROMECHANICAL LINEAR ACTUATORS AND SCREW SUPPORTS VRSARAM LTROMHANIAL LINAR ATUATORS AN SRW SUPPORTS 7 LTROMHANIAL LINAR ATUATORS OVRVIW OF TH PROUT BB TIPPING FLANG M INTGRAT BVL GAR BOX M1 RIGHT ANGL MOTOR RUR AN MOTOR MOUNT M0 ATUATOR BASI MOL BP TOP

More information

THE NEW 1.1 MN m TORQUE STANDARD MACHINE OF THE PTB BRAUNSCHWEIG/GERMANY

THE NEW 1.1 MN m TORQUE STANDARD MACHINE OF THE PTB BRAUNSCHWEIG/GERMANY THE NEW 1.1 MN m TORQUE STANDARD MACHINE OF THE PTB BRAUNSCHWEIG/GERMANY D. Peschel 1, D. Mauersberger 1, D. Schwind 2, U. Kolwinski 2 1 Solid mechanics department, PTB, Germany 2 Gassmann Theiss Messtechnik

More information

ER2 Short-head Electric Chain Hoist

ER2 Short-head Electric Chain Hoist O/M NO.SHER2-0903-CE-00 ER2 Short-head Electric Chain Hoist (250kg to 5t) Operation Manual (SHER2M/SHER2SG/SHER2SP) Introduction The KITO Short-head Electric Chain Hoist is intended for effective use in

More information

PUSH TUBE STANDARD DUTY

PUSH TUBE STANDARD DUTY PUSH TUBE STANDARD DUTY ASSEMBLY / OWNER S MANUAL Part No: 15-0070 PUR223 Rev. 00 OPERATING INSTRUCTIONS Congratulations! You ve just purchased the most durable plow component in the industry. Cycle Country

More information

SNL plummer block housings, 2, 3, 5 and 6 series Other bearing housings Large SNL plummer block housings

SNL plummer block housings, 2, 3, 5 and 6 series Other bearing housings Large SNL plummer block housings Bearing housings SNL plummer block housings, 2, 3, 5 and 6 series... 1033 Other bearing housings... 1058 Large SNL plummer block housings... 1058 SONL plummer block housings... 1059 SDG plummer block housings...

More information

SLIDE GUIDE SGL TYPE SLIDE GUIDE BLOCK TYPES ACCURACY

SLIDE GUIDE SGL TYPE SLIDE GUIDE BLOCK TYPES ACCURACY SGL YPE he N slide is a linear motion earing utilizing the rotational motion of all elements along four rows of raceway grooves. It can e used in various applications due to its compactness and high load

More information

Variable Speed 20" Single and Multi-spindle, Belt Drive Industrial Drill Presses

Variable Speed 20 Single and Multi-spindle, Belt Drive Industrial Drill Presses www.clausing-industrial.com Variable Speed 20" Single and Multi-spindle, Belt Drive Industrial Drill Presses Two Speed Variable Speeds 150-2000rpm Variable Speeds 200-1300rpm Variable Speeds 300-2000rpm

More information

( Single Case Construction )

( Single Case Construction ) OVL FLOWMETER Meter Size:,,,, ( Single ase onstruction ) Pocketless Design GENERL SPEIFITION GS.No.GBB--E GENERL The OVL flowmeter is a positive displacement type flowmeter comprising a pair of oval gear

More information

Operating Instructions for Digital Manometer. Model: MAN-SD

Operating Instructions for Digital Manometer. Model: MAN-SD Operating Instructions for Digital Manometer Model: MAN-SD 1. Contents 1. Contents...2 2. Note...3 3. Instrument Inspection...3 4. Regulation Use...4 5. Operating Principle...4 6. Mechanical Connection...5

More information

PERFORMANCE EVALUATION OF OVERLOAD ABSORBING GEAR COUPLINGS

PERFORMANCE EVALUATION OF OVERLOAD ABSORBING GEAR COUPLINGS International Journal of Mechanical Engineering and Technology (IJMET) Volume 9, Issue 12, December 2018, pp. 1240 1255, Article ID: IJMET_09_12_126 Available online at http://www.ia aeme.com/ijmet/issues.asp?jtype=ijmet&vtype=

More information

Engineering Data AC Servo Actuators FHA-C Mini

Engineering Data AC Servo Actuators FHA-C Mini Engineering Data AC Servo Actuators FHA-C Mini QUICKLINK www.harmonicdrive.de/1030 Contents 1. General...03 1.1 Description of Safety Alert Symbols...04 1.2 Disclaimer and Copyright...04 2. Safety and

More information