MACHINING CENTER FIXED DOUBLE COLUMNS. Quality, Credibility, Innovation, Service. Auto A/C swiveling head. Auto 90 o milling head
|
|
- Jessie Knight
- 6 years ago
- Views:
Transcription
1 Quality, Credibility, Innovation, Service Special angle milling head 3D Tilted Working Plane Indexing Axis Simultaneous milling head FIXED DOUBLE COLUMNS MACHINING CENTER Machine coordinate system Workplece coordinate system ( G4 ) Feature coordinate system ( G68.2 ) Auto 90 o milling head Auto A/C swiveling head TEL : yjpt@fourstarcnc.com FAX : http : // No.6-2, Lane 292, Da Lin Road, Da Ya District, Taichung City, 42847, Taiwan March
2 MOVING CROSS-RAIL FDW 0± ± FIXED DOUBLE COLUMNS 4-60 MODEL INFO FD W A + Axis simultaneous milling head 0±0.009 FIXED COLUMNS FIXED CROSS-RAIL FD x0 x0 Fully enclosure splash guard Y travel + 60 mm X axis travel 6000 mm Distance between columns 360 mm High precision machining MOVING CROSS-RAIL W type moving cross-rail Fixed Double Columns TRAVEL X- travel : 2200~6000mm Y - travel : 1400 /1800 / 20 / 2400 / 2800mm TRAVEL X- travel : 2200~6000mm Y - travel : 1800 / 20 / 2400 / 2800 / 3200 / 3600/ 4200mm Z - travel : 800 / 10 / 1400mm W- travel : 00~2000mm 3200 / 3600 / 4200mm Z - travel : 800 / 10 / 1400 / 0mm MODEL INFO FD F x0 + Auto angle milling head Y travel + 60mm X axis travel 6000mm x0 Distance between columns 420mm Fixed Double Columns Open type splash guard ( two sides ) For FD-28 ~ FD-42 & FDW series Semi enclosure type splash guard (no top) For FD-14 ~ FD-24A 1 2
3 igidity R l a Optim ( For FD-3660 ) Patent certificate SPINDLE BOX (RAM) Optimal design 40x400mm2 (std) FD-14 / 18 / 21 / 24A FD-28 / 32 FD-36 / 42 Heavy duty RAM size 0x0mm2, 60x60mm2 (opt) Supported with THK SRG roller guide ways SADDLE Structural Design FIXED DOUBLE COLUMNS Unity frame with reinforced ribs Stair type structural design Best track span 700~1mm CROSS-BEAM Box-in-box unity cast-iron frame According to door width matching best cross-beam design Optimal Cross-beam design ( Up and down span increase, front and rare narrow distance ) TABLE Double layer loop frame Box-in-box unity cast-iron More linear block to ensure rigidity & accuracy FD-14 Series Cross-beam & Column Unity frame with reinforced ribs. FD-14 ~ FD-24A COLUMN Box-in-box unity cast iron frame Enlarge column base increase rigidity BASE 3 Box-in-box unity cast iron FD-28 ~ FD-42 three linear guide way base Track with large span, High base, High rigid design All mounted surface made by precise hand-scraping 4
4 Optimization design key indicators for Double Columns Machining Center Box-in-Box unity cast-iron structure. AHC and Column separate independent firm ground. Columns and base separate independent firm ground. Extend Y travel for auto F machining. All linear guideways enhance rigidity and accuracy Crossbeam guideways span max Hmax and Bmin. Distance between spindle center and crossbeam Dmin. Spindle motor placed on top, to isolate vibration and heat source. With planetary gearbox efficiency over 9%. Gearbox is placed on the top for depth machining. RAM Enlarge Cutting Space Bmin Y axis travel + 60mm ATC + AHC H max Y axis travel Working Piece ATC AHC Extend Y-travel for auto-f cutting space i22 / 8000 POWER TORQUE ( kw ) ( N.m ) i22 / ) L/H Speed Direct drive POWER ( kw ) 26 kw min kw Continuous 18 kw 0 1 kw N.m 0 1: kw Continuous 3 N.m N w 21 N.m 18 N.m 8000 [rpm] Horizontal End milling f t w Manual ( 8 bolts ) Manual ( 8 bolts ) Head indexed Auto ( / 2. / 1 ) Auto ( ) Manual ( / free ) Tool clamped Booster Booster Bolt N.m 21 N.m Type Horizontal Face milling Horizontal End milling Material S4C S4C Cutter diameter mm Speed rpm m/min Cutter width mm Cutter Depth mm Rate of metal removal Power Rate of metal removal/kw N.m 1 N.m [rpm] connect High-speed output cc/min kw cc/kw 1 41 A axis 19.3 kw 404 N.m N.m 191 N.m 12 N.m :4 90 head Extension head Extension 90 head Universal head ( Only manual ) AC swiveling head 1 N.m 123 N.m 0 A axis 2 327N.m 3 N.m 23.8 kw N.m Feed rate mm/min N 800 connect Low-speed output Cutting speed t 22 kw 70 Cutting Record f kw 0 1:1 Max. SP speed Horizontal Face milling Auto ( hydraulic ) N.m 0 37 Head exchange ( kw ) kw Continuous N.m Manual 37 kw min 26 kw min Semi-Automatic POWER with Gear-Box ( ratio 1: 4 ) ( N.m ) 1 2 i / 7000 TORQUE ( Automatic with Gear-Box ( ratio 1: 4 ) ( N.m ) Type Enlarge column Base Cutting Capability TORQUE Calibration straightness and flatness by laser. Special Angle Milling Head ( Exchange Type ) Dmin Working Piece All mounted surface by precise hand-scraping. High-precision assembly SOP. Distance between Columns +32 Quality Assurance 38 N.m 31 N.m 6000 [rpm] 82 N.m 0 Special Milling Head ( Fixed Type ) 1: 1 1. Worm gear drive 2. Motor Direct drive Optimal Efficiency Transmission Direct drive spindle with P4 level precision ball bearing is oil chilled to reduce thermal deformation. Auto Head exchanger ( AHC ) Planetary gear A axis Two speed ratio IN-LINE gearbox Full enclosure, high power and performance. Face head ( dual tool shank ) Axis simultaneous head ( HSK A63 / A0, 1~80kW, ~400Nm, 6000~24000rpm ) AHC for Auto angle milling heads ( max. 6 heads ) 6
5 Auto F Milling Function FANUC 0 i MF & 31i MB Function List 1. Smart human multi-face machining 2. Coordinate rotation function 3. 3D tilting machining function 4. 3D rigid tapping function. 3D manual feed function 6. AICC II high speed high precision 7. Jerk control 8. Tool life management function 9. Tool radius compensation. Power failure protection function SHMI ( Smart Human-Machine Interaction ) Main screen MAIN TL-TD MONIT TOOL MULTI SCREEN YONG JU PRECISION TECHNOLOGY CO.,LTD. [TEXT] [TEXT] [TEXT] **** Tool load monitor TLM **** 08:40: /09/07 TOOL LOAD MONITOR TNO POT LOAD(%) L-GEOM L-WEAR R-GEOM R-WEAR LOADING METER SPLD 81% MAX. 19% X 46% MAX. 199% Y 141% MAX. 192% Z 126% MAX ATC INFORM MAG CAPACITY SPINDLE TOOL STANDBY TOOL STANDBY POT Tool measurement TM NO. TL COMP ( + ) PART 1.SIZE X Y Z X Y Z **** :09: /09/07 TOOL MEASUREMENT ABSOLUTE X Y Z.000 RELATIVE X Y Z.000 RELATIVE X Y Z **** 11:0: /09/07 Workpiece measurement WM WORKPIECE MEASUREMENT PART 2.EXT.SIZE PART 2.EXT.SIZE PART 3.EXT.SIZE VOLUMN HEIGTH **** 13:38: /09/07 Auto 90 o milling head Efficiency machining EM MAX LOAD = 0 % FEEDRATE = 0 % TOOL DIA = 0 mm EFFICIENCY MACHINING SPD LOAD = 0.0 % MATERIAL = 0 % 1.STEEL, 2.IRON MAX OVERRIDE = 0 % MAX OVERRIDE = 0 % MIN OVERRIDE = 0 % MIN OVERRIDE = 0 %(0~) IN OVERRIDE = 0 % IN OVERRIDE = 0 %(0~) **** 13:1: /09/07 ROUGHING LOAD ADAPTIVE CONTROL **** :09: /09/07 Auto feed control (AFC) AFC AFC - AUTO FEED CONTROL SETTING Spindle Load Spindle Load(%) Speed Scale value 60 Scale Max Scale % 1 Min Scale % 3 AC/DE-celeration % Min Max **** 14:21: /09/07 Dialogue guideline DG MANUAL GUIDE i (CNC_MEM/USER/PATH1) JOG :3:04 ACTUAL POS.(ABS.) DIST TO GO SPINDLE S1 O 0001 N G 00 S 0 T 0 X X 0 D 0 H 0 Y 0 S 0 M3 Z 0 FEED MM/MIN F Y A 0 G F 0 G %(Y) G Z DIST O0001 CHAR --> A G 00 1 O000 ; X M3 S00 ; Y G4 X600 ; Z M3 S1600 ; A G4 X600 ; CURRENT MACHINING 6 M99 ; 7 % ^ X 0.0 X 0.0 Y 0.0 Y 0.0 Z 0.0 Z 0.0 > MESURE MESLST ACTPOS PRESET Auto A/C swiveling head Roughing load adaptive control RLAC Specifications O i MF 31i MB Max controlled axes number 7 20 Max simultaneous controlled axis 4 4 Tandem / Torque control Increment system C Dual position feedback *1 Linear scale I/F with absolute address reference mark *1 HRV2 / HRV3 control Inch / metric conversion Interlock Machine lock Emergency stop Over travel Stroke limit check before move Mirror image Position switch Operation MDI operation DNC operation Program restart Retraction for rigid tapping Retraction for 3D rigid tapping *2 Buffer register Dry run Single block Jog feed 3-dimensional manual feed Manual handle interruption Incremental feed Auxiliary / Spindle speed function Auxiliary function High-speed M / S / T / B interface Spindle override Spindle orientation Rigid tapping Rigid tapping by manual handle Interpolation functions Nano interpolation Positioning Exact stop Linear interpolation Circular interpolation Dwell Cylindrical interpolation Helical interpolation Nano smoothing *3 Jerk control *3 Tolerance control *3 Thread cutting, synchronous cutting Skip function Optional block skip Reference position return check Editing Operation Part program storage size 3 Part program editing Program protect Extended part program editing Background editing Data server editing / operation Accuracy compensation function Stored pitch error compensation Smooth backlash compensation Interpolation type straightness compensation Specifications O i MF 31i MB Guidance function Manual Guide i Program input Absolute / incremental programming Decimal point programming calculator type Polar coordinate command Coordinate system setting Automatic coordinate system setting Workpiece coordinate system Addition of workpiece coordinate system Programmable data input Sub program call Custom macro Addition of custom macro common variables Canned cycles for drilling Circular interpolation by R programming 3-dimensional coordinate system conversion Automatic corner override Scaling Coordinate system rotation Tilted working plane indexing Setting and display Parameter setting and display Alarm display Alarm history display Operator message history display Operator history display Run hour and parts count display Multi-language display Dynamic display language switching Erase CRT screen display Self-diagnosis function Graphic display Machining condition selection function Feed function Rapid traverse rate Rapid traverse override Feed per minute Federate override Jog override AI contour control II Data input / output Memory card input / output Screen hard copy Power Mate CNC manager External I/O device control Fast data server Tool function / Tool compensation Tool offset pairs Tool offset memory C Tool offset Tool length measurement Automatic tool length measurement Tool life management Other Function Embedded Ethernet Fast Ethernet PMC system PMC function I/O Link DI/DO points Backlash compensation Stored pitch error compensation Standard Optional accessories function *1 For linear scale. *2 For auto milling head. *3 For mold cutting. 7 8
6 Series Specification list Item Unit FD-14 FD-18 FD-21 FD-24A Model FD A 2432A 2442A 242A Distance between columns mm Table size Length mm Width mm Max. Table Load ton T-slot Width Pitch No. mm X -axis mm Travel Y -axis mm FD-28 FD-32 FD-36 FD ( opt ) Tool shank & Pull stud dimension Ø0 Standard : BT-0 ( JIS MAS 403 / MAS 403 P0T-1 ) 60 o Ø /24 TAPER 48 Ø2 Ø2 Ø38 Ø o Ø23 Z -axis mm ( opt. 10 ) Nose to table mm ~ ~ ~ ~ ~ 87 1 ~ 9 7 ~ 87 Spindle Center to column mm 4 4 Taper / Speed / Power rpm / kw BBT rpm - 22/26kW + 2 stage gearbox Cutting m / min feedrate X axis m / min Y / Z axis m / min 18 / / 1 1 / 1 Accuracy mm Positioning ±0.01 / full travel ; Repeatability ±0.003 Capcity / Dia. mm 24 tools / max. dia Ø 1 ( Full tool ) ; Ø 200 ( Adjacent empty ) ATC & tool magazine Max. Length / Weight Kg / mm 18kg / 380mm Tool selection Random shortest direction / M24 P3.0-4 Length m Machine size Width m Height m (.47) Machine Weight (app.) ton Standard Accessories Optional Accessories Machine Layout & Dimension 10 ( opt ) 10 ( opt / 0 ) 180 ~ 1280 ~ ~ BBT rpm - 22/26kW + 2 stage gearbox / / 12 Positioning ±0.01 / full travel ; Repeatability ± tools / max. dia Ø 12 ( Full tool ) ; Ø 220 ( Adjacent empty ) 20kg / 400mm Random shortest direction / M24 P (6.1). (6.4) All data will change based on the actual situation without notice. Standard : ISO-0 / SK-0 ( DIN69871A / MAS 403 P0T-1 ) Ø Ø o 60 o Ø69.8 Ø /24 TAPER Ø2 7/24 TAPER 1-8UNC Ø26.2 Ø2 Ø38 Ø Standard : CAT-0 ( ANSI B.0 CAT0 / CAT-MAS 403 P0T-1 ) Ø26.2 Ø38 Ø o Ø23 4 o Ø23 1. FANUC 0 i MF +.4 LCD 1. X travel 7m ~ m ( FD28 ~ FD42 ) 2. Spindle cooler 2. Mitsubishi / Siemens / Heidenhain Controller 3. Spindle air blast 3. Spindle power / 37 kw with gearbox 4. N2 Counter balancing system 4. High speed Spindle ( 8000~20000rpm ). Dual stage H/L planetary gearbox. Coolant Through Spindle ( CTS ) 6. Independent auto lubrication system milling head ( Auto, Semi-auto, Manual ) 7. Program end alarm lamp 8. Rigid tapping 7. Extend milling head ( Auto, Semi-auto, Manual ) 8. AC swiveling milling head ( Auto, Manual ) X-travel H 9. Electric cabinet heat exchanger. USB / RS232 / Ethernet interface 11. Coolant system 9. AHC system ( for auto milling head ). Toggle head stand ( for semi-auto / Manual milling head ) Y-travel +60mm 12. Dual spiral type chip remover 11. Five face milling head ( Fixed type ) 13. Metal belt chip conveyor with cart 12. Universal milling head ( Fixed type, Manual ) 14. Cam type ATC 24pcs ( FD14 ~ FD24A ) 1. Chain type ATC 32pcs ( FD28 ~ FD42 ) 16. Semi-enclosure splash guard ( FD14 ~ FD24A ) 13. axis simultaneous milling head 14. Y travel extend 60mm ( for Auto F machining ) 1. Heavy duty RAM 0 0 ( FD-28 and up ) ATC AHC W L 17. Open type splash guard ( FD28 ~ FD42 ) 16. X, Y, Z axis linear scale 18. ATC auto door 17. Tool length measurement 19. Foot switch for tool away 18. Auto work piece measurement 20. Working lamp 19. CNC rotary table ( indexed / simultaneous ) 21. Leveling screw + foundation bolts 20. Coolant thru tool holder device 22. Tool kit & Operator s manual 21. Full enclosure splash guard 23. Air / water cleaning equipment 22. Oil skimmer 24. W axis linear scale ( 2 pcs ) ( FDW series ) 23. Transformer 9
AF SERIES AWEA MECHANTRONIC CO., LTD. High Performance Vertical Machining Center AGENT ISO 9001 ISO 14001
AWEA MECHANTRONIC CO., LTD. HEADQUARTERS 629, Suezhetou Section, Kwanpu Rd., Wenshan Li, Hsinpu, Hsinchu, Taiwan TEL : +886-3-88-191 FAX : +886-3-88-19 Website : www.awea.com CENTRAL TAIWAN SCIENCE PARK
More informationSTANDARD & OPTION 1 X, Y, Z axis linear scale 2 Saddle slideway cover 3 Table slideway cover 4 Table Splash guard 5 Working light 6 Coolant circulatio
STANDARD & OPTION X, Y, Z axis linear scale 2 Saddle slideway cover 3 Table slideway cover Table Splash guard 5 Working light 6 Coolant circulation system 7 8 ITEM Bolts & leveling pads for installation
More informationLarge Vertical Turning Center with RAM Head Spindle
Large Vertical Turning Center with RAM Head Spindle With its large capacity and heavy duty machining capability, The PUMA VTS series provides excellent productivity for large workpieces 02 Features 1 Robust
More informationDNM 750 Ⅱ series. series. High Speed High Performance Horizontal Machining Center DNM 750 [ L ] Ⅱ DNM 750 [ L ] / 50 Ⅱ. ver.
DNM 750Ⅱ series High Speed High Performance Horizontal Machining Center DNM 750 Ⅱ series DNM 750 [ L ] Ⅱ DNM 750 [ L ] / 50 Ⅱ ver. EN 160803 SU High Productivity Vertical Machining Center The DNM 750 includes
More informationMODEL: CNC-C600 PRODUCT SPECIFICATION
茗亞精密機械股份有限公司 NEUAR PRECISION MACHINERY COMPANY LTD. No. 11, Aly. 19, Ln. 20, Daxing Rd., Luzhu Dist., Taoyuan City, Taiwan Tel:886-3-3136986 ; Fax:886-3-3232376 E-mail: neuar.edm@msa.hinet.net ; Website:
More informationMODEL: CNC-HC60Q PRODUCT SPECIFICATION
茗亞精密機械股份有限公司 NEUAR PRECISION MACHINERY COMPANY LTD. No. 11, Aly. 19, Ln. 20, Daxing Rd., Luzhu Dist., Taoyuan City 338, Taiwan, R. O. C Tel:886-3-3136986 ; Fax:886-3-3232376 E-mail: neuar.edm@msa.hinet.net
More informationNFP500A-5AX. High Speed High Precision Gantry 5-axis machining center
NFP500A-5AX High Speed High Precision Gantry 5-axis machining center NFX500A-5AX Product Positioning 1 High-end A. small double column NFP500A-5AX B. Big double column DCV2018A-5AX series C. Big double
More informationHeavy-Duty Horizontal Machining Center
Heavy-Duty Horizontal Machining Center The New Generation World-Class NHM series of Heavy-Duty Horizontal Machining Centers The NHM series combines the heavy-duty cutting, unsurpassed machining capacity
More informationVM 5400 / High Performance Vertical Machining Center for Die / Mold Machine VM 5400 VM ver. EN SU
VM 5400 / 6500 High Performance Vertical Machining Center for Die / Mold Machine VM 5400 / 6500 VM 5400 VM 6500 ver. EN 170724 SU Standard core features for high precision mold processing The efficiency
More informationClausing Industrial, Inc. Variable Speed 20" Single and Multi-spindle, Belt Drive Industrial Drill Presses
www.clausing-industrial.com Variable Speed 20" Single and Multi-spindle, Belt Drive Industrial Drill Presses Clausing Industrial, Inc. Two Speed Variable Speeds 150-2000rpm Variable Speeds 200-1300rpm
More informationVariable Speed 20" Single and Multi-spindle, Belt Drive Industrial Drill Presses
www.clausing-industrial.com Variable Speed 20" Single and Multi-spindle, Belt Drive Industrial Drill Presses Two Speed Variable Speeds 150-2000rpm Variable Speeds 200-1300rpm Variable Speeds 300-2000rpm
More informationEUROMASTER HYDRAULIC PRESSBRAKES
EUROMASTER HYDRAULIC PRESSBRAKES EUROMASTER HYDRAULIC PRESSBRAKES 02_ EUROMASTER Euromaster 50250 The Euromaster has been developed as a modern pressbrake with electronic levelling and depth control Synchro
More informationTE 75R RESEARCH RUBBER FRICTION TEST MACHINE
TE 75R RESEARCH RUBBER FRICTION TEST MACHINE Background: The Research Rubber Friction Test Machine offers the ability to investigate fully the frictional behaviour of rubbery materials both in dry and
More informationSTUD & TRACK ROLL FORMING MACHINE
STUD & TRACK ROLL FORMING MACHINE R O L L F O R M E R S U S A I W W W. R O L L F O R M E R S - U S A. C O M Page1 Cantilevered Dual Headed 6,000 lb Decoiler Includes mandrel and stand Can accommodate 22
More informationGUHROSync Synchro tapping chucks THE BEST OF BOTH SYSTEMS GUHRING - YOUR WORLD-WIDE PARTNER
THE BEST OF BOTH SYSTEMS THE ADVANTAGES OF HYDRAULIC CHUCKS & SYNCHRO TAPPING CHUCKS IN ONE TOOL HOLDER GUHROSync Synchro tapping chucks GUHRING - YOUR WORLD-WIDE PARTNER GUHROSYNC THE EASY WAY TO THE
More informationHeight Master Page 343. Check Master Page 347. Calibration Tools Page 352
Calibration Instruments Height Master Page 343 Check Master Page 347 Calibration Tools Page 352 342 Digital Height Master Functions ZERO/ABS DATA/HOLD Auto Power OFF after 20 min. non use Low voltage alarm
More informationSYNCHROMASTER HYDRAULIC PRESSBRAKES
HYDRAULIC PRESSBRAKES HYDRAULIC PRESSBRAKES 02_ Synchromaster 30100 STANDARD EXECUTION - Electro-hydraulic levelling and depth stop setting by Synchro system - Automatic compensation of the sideframe deflection
More informationAPEX DYNAMICS, INC. Staianless
APEX DYNAMICS, INC. HIGH PRECISION PLANETARY GEARBOXES AE / AER Series Staianless High precision high speed planetary gearboxes AE / AER series Apex Dynamics, Inc. is the world s most productive manufacturer
More informationAE / AER Series. AER Series
AE / AER Series Characteristic Highlights True helical gear design Precision helical gearing increases tooth to tooth contact ratio by over % vs spur gearing. The helix angle produces smooth and quiet
More informationCoating K = TFE wear resist, dry lubricant Kerkote X = Special coating, (Example: Kerkote with grease)
HAYD: 0 WGS0 Low Profile, Screw Driven Slide WGS0 Linear Rail with Hybrid 000 Series Size Single and Double Stacks and 000 Series Size Single and Double Stacks Kerk Motorized WGS Linear Slide utilizes
More informationAn NC program is a program that defines the entire sequence of a machining operation to be carried out on a particular CNC machine tool:
Outline MC Programming I NC Program NC Codes Blocks G and M codes Other codes Programming Basic Motions Rapid travel Linear motion Circular motion Examples NC Program An NC program is a program that defines
More informationProduct Description. Further highlights. Outstanding features. 4 Bosch Rexroth Corporation Miniature Linear Modules R310A 2418 (2009.
4 Bosch Rexroth orporation Miniature Linear Modules R310A 2418 (2009.05) Product Description Outstanding features Rexroth Miniature Linear Modules are precise, ready-to-install linear motion systems that
More informationOPERATING INSTRUCTIONS ROTOKLICK MK 150 MULTIKLICK MK 150 MULTIDEX
OPERATING INSTRUCTIONS ROTOKLICK MK 150 MULTIKLICK MK 150 MULTIDEX Type: Drehfutter Type: Wippe Type: Traverse Type: Würfel Haff & Schneider GmbH & Co. OHG Obere Wank 2 D-87484 Nesselwang www.haff-schneider.com
More informationMetal core drills the most cost-effective drilling experience.
Metal core drilling Metal core drills the most cost-effective drilling experience. Core drilling is an extremely efficient process: faster, quieter and more accurate than twist drilling. And since core
More informationTrunnion Hook-up (Tilt & Rotary = Full Axis)
. Trunnion Rotary Series March 2004 Trunnion Hook-up (Tilt & Rotary = Full Axis).......... Haas Automation Training MINIMUM MACHINE REQUIREMENTS TO USE THIS PROCEDURE: Haas CNC Mills with 5 axis capability.
More informationSelection of jack size No. 5 Check again with ball screw jack Type J-B. Yes. Set the hand wheel radius if the screw jack is to be used for manual operation. Yes. Yes. Specification Select temporarily the
More informationAPEX DYNAMICS, INC. Staianless
APE DYNAMICS, INC. HIGH PRECISION HIGH SPEED PLANETARY GEARBOES AF / AFR Series Staianless High precision high speed planetary gearboxes AF / AFR series Apex Dynamics, Inc. is the world s most productive
More informationPre-owned - 8 colour press FA-Line: FA-4* NEXT CLEANINKING #F4733 MODULAR 16" MULTI-SUBSTRATE FLEXO PRESS
Pre-owned - colour press FA-Line: FA-4* NEXT CLEANINKING #F4733 MODULAR 6" MULTI-SUBSTRATE FLEXO PRESS Press Specification Number: Date: Our ref.: 60270 9.06.20 JAL/kis U N W I N D M O D U L E Motorized
More informationROTARY MOTION CONTROL
ROTARY MOTION CONTROL Technical Data Sheet Nexen Mechanical Torque Limiter Family PMT / PMK / PMC 2TC 2CC ECC PCC Mechanical Torque Limiter The trend in industry is to design and incorporate more automation
More informationRGS06 Linear Rails: RGS06 Non-Motorized With and Without Guide Screw. RGS06 Non-Motorized Linear Rails
on-motorized With and Without Guide on-motorized Linear Rails RG Series linear rails are available: on-motorized, -driven linear rail on-motorized, Wide format, -driven linear rail on-motorized, Wide format,
More informationIdentification system for short product names. Changes/amendments at a glance. 2 Bosch Rexroth AG OBB omega modules R ( )
Omega Modules OBB 2 OBB omega modules R9990079 (206-05) Identification system for short product names Short product name Example: O B B - 085 - N N - System = Omega module Guideway = Ball Rail System Drive
More informationSNL plummer block housings, 2, 3, 5 and 6 series Other bearing housings Large SNL plummer block housings
Bearing housings SNL plummer block housings, 2, 3, 5 and 6 series... 1033 Other bearing housings... 1058 Large SNL plummer block housings... 1058 SONL plummer block housings... 1059 SDG plummer block housings...
More informationHaas trunnions have more than one configuration. Thus, to make a program for the trunnion, you must know these facts:
Haas Technical Documentation Trunnion Information Scan code to get the latest version of this document Translation Available Trunnion Features Haas trunnions have more than one configuration. Thus, to
More informationA 954 C HD. Technical Description Hydraulic Excavator. Machine for Industrial Applications
Technical Description Hydraulic Excavator A 95 C HD litronic` Machine for Industrial Applications Operating Weight 165,800 170,0 lb Engine Output 36 hp (0 kw) Technical Data Engine Rating per ISO 99 0
More informationHigh Capacity Double Pillar Fully Automatic Bandsaw. p h a r o s 2 8 0
High Capacity Double Pillar Fully Automatic Bandsaw p h a r o s 2 8 0 A high-quality product from German mechanical engineering pharos - a beacon amongst automatic bandsaws Klaeger has been a leading manufacturer
More informationGS-200 SERIES Ultra Performance CNC Turning Centers
G- ERIE Ultra Performance CNC Turning Centers G- eries Construction pindle Turret Multi-Tasking ULTRA PERFRMANCE CNC TURNING CENTER Packed with industry leading technology and top quality components, the
More informationRGS08 Linear Rails: RGS08 Non-Motorized With and Without Guide Screw. RGS08 Non-Motorized Linear Rails
RGS08 RGS08 Non-Motorized With and Without Guide RGS08 Non-Motorized Linear Rails RG Series linear rails are available: RGS08 Non-Motorized, -driven linear rail RGS08 Non-Motorized linear rail without
More informationDrive Units with Ball Screw Drives R310EN 3304 ( ) The Drive & Control Company
Drive Units with Ball Screw Drives R310EN 3304 (2007.05) The Drive & Control Company Linear Motion and Assembly Technologies Ball Rail Systems Roller Rail Systems Linear Bushings and Shafts Precision Ball
More informationWenzhou Tripod Instrument Manufacturing Co., Ltd.
Wenzhou Tripod Instrument Manufacturing Co., Ltd. Website: http://aliyiqi.en.alibaba.com http://www.wzydyq.com/english/ Phone: 86-577-57572515 57572515 Fax: 86-577-57572516 57572516 E-mail: aliyiqi@gmail.com
More informationCompendium Screw Jacks
Compendium Screw Jacks Screw Jack Technology Overview of chapters Useful information Project planning Screw jacks Bevel gear boxes Lifting screw protective covers Couplings and connecting shafts Accessories
More informationBOXED BEAM ROLL FORMING MACHINE
BOXED BEAM ROLL FORMING MACHINE R O L L F O R M E R S U S A I W W W. R O L L F O R M E R S - U S A. C O M Page1 R O L L F O R M E R S U S A I W W W. R O L L F O R M E R S - U S A. C O M Page2 Cantilevered
More informationProduct description. Compact Modules. Characteristic features. Further highlights
4 Compact Modules Product description Characteristic features Five fine-tuned sizes based on a compact precision aluminum profile with two integrated pre-tensioned ball rail systems Identical external
More informationNew design with innovative plug-and-play technology
technical details New design with innovative plug-and-play technology E-520. on Unitech XV600 E / T3 T T + M Summary 7 MOT / KB 2 6 TIG 3 5 35% shorter and attachable from the outside in any position technical
More informationBRIGHT-STRATO SERIES
Coordinate Measuring Machines BRIGHT-STRATO SERIES CNC Coordinate Measuring Machine Bulletin No. 1855 Moving-bridge type CMM with excellent measuring accuracy. Its measuring envelope is suitable for medium-to-large
More informationHORIZONTAL SETTING DEVICE
THE HOW TO... MANUAL HORIZONTAL SETTING DEVICE The Guide to assembling an HORIZONTAL SETTING DEVICE THANK YOU for purchasing an IT.TE.DI. product. IT.TE.DI. is an Italian state-of-the-art company which
More informationUniversal bumper to frame hitch for 27,000 33,000 lbs. GVWR trucks. Optional: carbide cutting edge, mushroom shoes, snow deflectors
DATA SPECIFICATION SHEET MEYER RP SERIES (ROAD PRO) Specifications RP-10 10 feet long by 36 inches tall, weight approximately 1600 lbs. Universal bumper to frame hitch for 27,000 33,000 lbs. GVWR trucks
More informationCTV series CHARACTERISTICS LINEAR UNITS
CTV series CHARACTERISTICS The CTV series describes s with a precision ball screw drive and two parallel, integrated, Zerobacklash rail guides. Compact dimensions allow high performance features such as,
More informationDISCONTINUED PRECISION MEASURING FOWLER CALIPERS 1 - VERNIER CALIPERS 4 - ELECTRONIC CALIPERS
FOWLER CALIPERS 1 - VERNIER CALIPERS 4 - ELECTRONIC CALIPERS 52-058-016 Fine quality vernier calipers are constructed of stainless steel. 52-057-004 offers 3-way measurement to accuracy. 52-058-XXX series
More informationNR ROTARY RING TABLE: FLEXIBLE IN EVERY RESPECT
NR FREELY PROGRAMMABLE ROTARY TABLES NR ROTARY RING TABLE All NR rings allow customer-specific drive motors to be connected NR ROTARY RING TABLE: FLEXIBLE IN EVERY RESPECT WHEN IT S GOT TO BE EXACT We
More informationMetrology Prof. Dr Kanakuppi Sadashivappa Bapuji Institute of Engineering and Technology Davangere
Metrology Prof. Dr Kanakuppi Sadashivappa Bapuji Institute of Engineering and Technology Davangere Lecture 32 Introduction To Comparators, Mechanical Comparators (Refer Slide Time: 00:15) I welcome you
More informationthe foundation of any business starts here
the foundation of any business starts here TABLE OF CONTENT The Company... 3 Electric Motors... 4 Gearboxes... 5 Automation Products... 6 Electric Components... 9 Pneumatics... 12 Hydraulics... 13 Handling
More informationPrecision Ball Screw/Spline
58-2E Models BNS-A, BNS, NS-A and NS Seal Outer ring Shim plate Seal Spline nut Seal Collar Shim plate Seal End cap Ball Outer ring Ball screw nut Outer ring Ball Retainer Retainer Outer ring Point of
More informationCoordinate Measuring Machines Coordinate INDEX Measuring Machines Coordinate Measuring Machines New Products
Coordinate Measuring Machines Coordinate Measuring Machines New Products INDEX Coordinate Measuring Machines Crysta-Apex Series L-2, 3 LEGEX Series L-4 Bright-STRATO Series L-5, 6 CP Series L-6 CARBstrato
More informationSKF actuators available for quick delivery. Selection guide
SKF actuators available for quick delivery Selection guide A wide range of SKF actuators available for quick delivery Industrial actuator 24 Volt DC Load range 1 000 to 4 000 N Speed range 5 to 52 mm/s
More informationC N C M A C H I N I N G
C N C M A C H I N I N G C N C M A C H I N I N G P R E C I S I O N M E C H A N I C S Our machines are located in a 10,000 sqm plant and feature a wide range of machining varieties and services. Cutting-edge
More informationThe basic dynamic load rating C is a statistical number and it is based on 90% of the bearings surviving 50 km of travel carrying the full load.
Technical data Load Rating & Life Under normal conditions, the linear rail system can be damaged by metal fatigue as the result of repeated stress. The repeated stress causes flaking of the raceways and
More informationRPM Adjustable Speed Adjustable Force Noiseless - As Low As 68dB Continuous Duty
E L E C T R I C V I B R AT O R S A D J U S TA B L E S P E E D & F O R C E S I L E N T S p e e d D i a l C o n t ro l o n A l l U n i t s L o w P o w e r C o n s u m p t i o n O v e r l o a d P ro t e c
More informationTESA MICROMASTER Electronic Micrometers with Digital Display
TESA MICROMASTER Electronic Micrometers with Digital Display DIN 86 T1 0,001 0.00005 in Metric/Inch conversion 100 : Ø 6,5 > 100 : Ø 8 With patented TESA capa µ system Measuring span of 0 or 25. Large
More informationExternal Micrometers. C-1
External Micrometers www.tesatechnology.com C-1 External Micrometers Precision Measurement Precision measurement requires the use of micrometers. In 1848, the first measuring tool of this type was patented
More informationSystem Components. Electric Motors.
System Components Electric Motors www.powerjacks.com Contents.1. Electric Motors.1.1. AC Motors.1.. AC Motor Performance 0 rpm ( pole).1.. AC Motor Performance 00 rpm ( pole).1.. AC Motors with Integral
More informationSingle cam type. Double cam type. Grip force N. Type Model/size Stroke Screw type straight style. Screw type tee style
Type Model/size Stroke -SS-0-N. -SS-0-N. Single cam type -SS- 7. -SS-. -SS-4. -SD-0 Double cam type -SD- -SD-4. Screw type straight style Screw type tee style -FS- -FT- -FS- -FT- 0.9 1. 1.. 1. 4 Grip forcen
More informationXL-580. Liste de pièces Lista de Piezas Parts List Copyright SVP Worldwide - All rights reserved
0 Copyright SVP Worldwide - All rights reserved XL-0 Liste de pièces Lista de Piezas Parts List 0-6 0 March 0 A 0 0 6 6 Singer XL-0 Pos Part No Description 0 0 THRUST WASHER 60 MAIN SHAFT WITH BALANCER
More informationR-Plus System Frontespizio_R_PlusSystem.indd 1 11/06/ :32:02
R-Plus System R-Plus System R-Plus system R-Plus system description Fig. R-Plus system R-Plus System is Rollon s series of rack & pinion driven actuators. Rollon R-Plus System series linear units are designed
More informationCam Roller Guides. The Drive and Control Company. Service Automation. Electric Drives and Controls. Linear Motion and Assembly Technologies
Industrial Hydraulics Electric Drives and Controls Linear Motion and Assembly Technologies Pneumatics Service Automation Mobile Hydraulics Cam Roller Guides The Drive and Control Company Linear Motion
More informationPARTS MANUAL 2 INCH CHIPPER/SHREDDER. SC cc SUBARU
www.bearcatproducts.com 2 INCH CHIPPER/SHREDDER SC2170 170cc SUBARU PARTS MANUAL PN: 1641-00 Rev. 0011 Companion to 1509-00 Range: D01688 - Current Before You Begin DEAR ECHO BEAR CAT CUSTOMER Thank you
More information6.0 PRICE SCHEDULE - ONE WAY SNOW PLOW
Price quote for: 6.0 PRICE SCHEDULE - ONE WAY SNOW PLOW Vendor Name: Contact Person: Street Address: P.O. Box: City, State, Zip: Phone #: Toll Free #: Fax #: Email Address: Bert's Truck Equipment of Moorhead,
More informationCoromant Capto Short Adapter
Coromant Capto Short Adapter The quick change system for reduced setup and production time. Faster return on investment. Short Adapter Short Adapter More available cutting tool length Short toolholder
More informationMotion Control. Laboratory assignment. Case study. Lectures. compliance, backlash and nonlinear friction. control strategies to improve performance
436-459 Advanced Control and Automation Motion Control Lectures traditional CNC control architecture modelling of components dynamic response of axes effects on contouring performance control strategies
More informationXL-550. Liste de pièces Lista de Piezas Parts List
SINGER is the exclusive trademark of The Singer Company S.à.r.l or its Affi liates. 0 The Singer Company Limited S.à.r.l or its Affi liates. All rights reseved. XL-0 Liste de pièces Lista de Piezas Parts
More informationTOPCNC TC55V Instruction Manual
TOPCNC TC55V Instruction Manual 1. Product Introduction TC55E is an upgrading version of TC55. It is equipped with 3.5 inch color screen, RS 485 communication, Chinese/English Switch, and USB connection.
More informationRelease notes for measuring cycles, software version
Release notes, software version 06.03.23.00 Software component: Measuring cycles for turning and milling machines for 810D, 840Di and 840D Software release, new: SW 06.03.23.00 Software release, to date:
More informationHAWK TECHNOLOGY LTD.
Stard Trunnion Line HAWK TECHNOLOGY LTD. Going Beyond Everyday Hawk Technology Ltd has evolved with today's manufacturing requirements by planning, designing, building installing state-of -the-art robotic
More informationARDEN PRECISION TECHNOLOGY CO., LTD ROUTER BITS
ARDEN PRECISION TECHNOLOGY CO., LTD WWW.ARDEN.COM.TW ROUTER BITS P.01-0 P.10- P.- P.-0 P.1- P.- P.- P.0 Easy Clamp P.1 Single ute bit should be used where cut speed is more important than cut nish. Making
More informationTOPCNC TC55V Instruction Manual.
TOPCNC TC55V Instruction Manual WWW.ChinaPlccenter.COM 1. Product Introduction TC55E is an upgrading version of TC55. It is equipped with 3.5 inch color screen, RS 485 communication, Chinese/English Switch,
More informationResearch Collection. Thermal issues in 5-axis machine tools. Conference Paper. ETH Library
Research Collection Conference Paper Thermal issues in 5-axis machine tools Author(s): Wegener, Konrad; Gebhardt, Michael; Mayr, Josef; Knapp, Wolfgang Publication Date: 2014 Permanent Link: https://doi.org/10.3929/ethz-a-010268704
More informationTisa Enterprises. The Clamping Professionals
Flat Strap Clamp Material: Medium carbon steel, Hardened and Tempered : T1-FSC IS: - 4 D x L A B K S T1-FSC- x 0. T1-FSC- x 0. T1-FSC- x 0. T1-FSC-1 x 1 0. T1-FSC-1 x 1 M 1.00 T1-FSC-1 x 0 M 1. T1-FSC-0
More informationLever-type Dial Test Indicators
Lever-type Dial Test Indicators www.tesatechnology.com G-1 Lever-type Dial Test Indicators TESA IP65 Electronic Dial Test Indicators Provides the advantages of a mechanical test indicator with a digital
More informationLever-type Dial Test Indicators
Lever-type Dial Test Indicators G-1 Lever-type Dial Test Indicators TESA IP65 Electronic Dial Test Indicators Provides the advantages of a mechanical test indicator with a digital reading. Inductive patented
More informationGE Fanuc Automation. Alpha i Series AC Servo Motor. Computer Numerical Control Products. Parameter Manual
GE Fanuc Automation Computer Numerical Control Products Alpha i Series AC Servo Motor Parameter Manual GFZ-65270EN/01 May 2001 Warnings, Cautions, and Notes as Used in this Publication GFL-001 Warning
More informationM A C H I N E L I S T - P R O D U C T I O N P R O C E S S E S
S P E C T R U M O F S E R V I C E S G R A P H I C S All commonly available programmes C O N S T R U C T I O N CAD, 3D construction, static loading, structural analysis interfaces to industrial construction
More informationCircular Motion and Centripetal Force
[For International Campus Lab ONLY] Objective Measure the centripetal force with the radius, mass, and speed of a particle in uniform circular motion. Theory ----------------------------- Reference --------------------------
More informationVisit any one of our 30 locations or visit us on line at
TYPE IA ALUMINUM 2886509079 2886501870 2886510013 2886510010 2886510014 2886504441 AS3002 2' TYPE IA AS3003 3' TYPE IA AS3004 4' TYPE IA AS3006 6' TYPE IA AS3008 8' TYPE IA AS3010 10' TYPE IA 34.99 57.99
More informationBD-04a: Check Machine Geometry and Lost Motion
Page 1 of 14 BD-04a: Check Machine Geometry and Lost Motion SAFETY FIRST o Follow all Caterpillar facility safety standards when performing this task. o A hoist will be necessary for moving the cube or
More informationFOUR-POINT CONTACT SLEWING RINGS - without gear [ O ]
FOUR-POINT CONTACT SLEWING RINGS - without gear [ O ] Number of the Loading Boundary Dimensions Static Ax.Basic Load Rating Designation Weight Abutment Dimensions Curve d D T C oa G J 1 J 2 N 1 N 2 n 1
More informationproduct manual H-3220A Benkelman Beam
05.12 product manual H-3220A Benkelman Beam General The H-3220A Benkelman Beam Apparatus is a convenient and accurate device used for measuring the deflection of flexible pavements under moving wheel
More informationUNI EN ISO 9001:2008 UNI EN ISO 14001:2004 BS OHSAS 18001:2007 EC DIRECTIVE 2014/34/EU (ATEX) CERTIFIED MANAGEMENT SYSTEM
EN ISM-BSM CERTIFIED Technology Made in Italy Since 1955 the Varvel Group has been making speed reducers and variators for light industry applications. Reliable partner in power transmission equipment
More informationBright Advance Corporation
USER INSTRUCTIONS TABLE OF CONTENTS INSTRUCTIONS FOR USE2 PREPARING TO USE THE SCALE2 DISPLAYS3 KEYBOARD FUNCTION4 OPERATION7 COUNTING14 DIFFERENT KEYBOARD TYPES21 INTERFACE31 POWER SOURCES40 1 INSTRUCTIONS
More information2100TR Liquid Scintillation Counter
2100TR Liquid Scintillation Counter Description The Tri-Carb 2100TR liquid scintillation counter is computer-controlled, bench top liquid scintillation analyzer for detecting small amounts of alpha, beta
More informationDial Test Indicators SERIES 513
Dial Test s SERIES 513 Narrow or deep places, which cannot be measured with a normal dial gauge, can be easily and accurately measured. Mitutoyo's proprietary new structure permits smooth pointer operation.
More informationMyron Bowling Auctioneers
Myron Bowling Auctioneers NUVASIVE, INC. Medical Implant Manufacturer - Surplus to Ongoing Needs NUVASIVE, INC. 1 Herald Square Fairborn Ohio 45324 United States Started Feb 15, 2018 10am EST (3pm GMT)
More informationRevision 1.0, January 2014 MICRONIX USA, LLC
2014 Edition Revision 1.0, January 2014 MICRONIX USA, LLC The information within regarding the MICRONIX USA Product Line and/or any other products and technology owned by MICRONIX USA, LLC are subject
More informationSemi-automatic titrators PH-Burette. A great ph-meter with integrated burette. Incredible price! Infinite possibilities
Semi-automatic titrators PH-Burette. A great ph-meter with integrated burette. Incredible price! Infinite possibilities instruments 5 YEARS G U A R A N T E E Quality at a reasonable price The optimum combination
More informationDial Test Indicators Comparison measuring instruments which ensure high quality, high accuracy and reliability.
Dial Test s Comparison measuring instruments which ensure high quality, high accuracy and reliability. SERIES 513 Lever-Type Dial s eature icons Designed to probe surfaces that cannot be reached with a
More information1 Linear feeder 2 Track 3 Cover 4 Side plate 5 Trim weight 6 Sub-structure. 8 Feeding technology afag.com
Linear feeder Track Cover Side plate Trim weight Sub-structure 8 Feeding technology 0 Linear feeder Linear feeder Linear feeder HLF-M Linear feeder HLF-P 8 Control devices PSG Accessory HLF Linear feeder
More informationExp All technology at operator s service. Suggested Orange peel. Straight boom m. Industrial straight stick 8.00 m RV 600 2,
Exp 5055 Exp 5055 All technology at operator s service 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 20 19 18 17 16 15 14 13 12 11 10 8 9 7 6
More information473-SHX Dew Point Mirror
Humidity and Temperature Reference Hygrometer For Temperature up to 125 C Precise and stable chilled mirror dew point mirror technology High temperature optical components High temperature sample fan Cable
More informationEXACTNESS IN THE NANOMETER RANGE USED TO BE A UTOPIAN AND THEN THERE WAS PRECIMAR
- EXACTNESS IN THE NANOMETER RANGE USED TO BE A UTOPIAN IDEAL AND THEN THERE WAS PRECIMAR The Precimar product family specializes in high-precision dimensional metrology for absolute and relative measurements.
More informationR310EN 2403 ( ) The Drive & Control Company
Feed Modules VKK R310EN 2403 (2008.09) The Drive & Control Company Linear Motion and Assembly Technologies Ball Rail Systems Roller Rail Systems Linear Bushings and Shafts Ball Screw Drives Linear Motion
More informationFAGOR 8055i CNC Ordering Handbook. Ref. 1502
FAGOR 8055i CNC Ordering Handbook. Ref. 1502 FAGOR AUTOMATION DENOMINATIONS CN55i - - - - - - - Type of CNC (CNC 8055i) CPU type Type of function General purpose Milling machines & Centers Conversational
More information55% OFF CARBIDE HIGH SPEED STEEL COBALT. Phone: (616) Toll-Free: Fax: (616) cbdekorne.com
CARBIDE HIGH SPEED STEEL COBALT Phone: () - Toll-Free: -00--0 Fax: () - cbdekorne.com PLEASE TAKE % OFF PRINTED S END MICRO END THREAD COUNTER SINKS CHAMFER DRILL TAPS & DIES OUR COMMITMENT TO YOU...
More information