Coating K = TFE wear resist, dry lubricant Kerkote X = Special coating, (Example: Kerkote with grease)

Size: px
Start display at page:

Download "Coating K = TFE wear resist, dry lubricant Kerkote X = Special coating, (Example: Kerkote with grease)"

Transcription

1 HAYD: 0 WGS0 Low Profile, Screw Driven Slide WGS0 Linear Rail with Hybrid 000 Series Size Single and Double Stacks and 000 Series Size Single and Double Stacks Kerk Motorized WGS Linear Slide utilizes a screw-driven carriage that offers reliable, continuous linear speed while maintaining accurate positioning. The length and speed of the WGS is not limited by critical screw speed, allowing high RPM, linear speed and long stroke lengths. The WGS slide has a unique, compact profile that provides improved torsional stiffness and stability over RGS and RGW products. Technical specifications for Size Hybrid Linear Actuator Stepper Motors and Haydon Kerk IDEA programmable drives are on page, Size specifications are on page. To determine which motor assembly is best for your application see the Linear Rail Applications Checklist on page. WGS0 with Size [ mm] hybrid linear stepper motor and WGS0 with Size [ mm] with an optional PC programmable IDEA Drive (not available for Size motor) Identifying the Motorized WGS part number codes when ordering WG S 0 K G 000 XXX Prefix WG = Wide Guide Screw Frame Style S = Standard Carriage holes available in Metric sizes M M M M Frame Size Load* 0 = Max. static load lbs ( N) NOTE: Dashes must be included in Part Number ( ) as shown above. For assistance or order entry, call our engineering team at 0. Coating K = TFE wear resist, dry lubricant Kerkote X = Special coating, (Example: Kerkote with grease) Drive / Mounting M = Motorized G = IDEA integrated programmable drive - USB communications J = IDEA integrated programmable drive - RS8 communications Thread Lead Code 000 = 0.-in (.) 000 = 0.-in (.08) 000 = 0.-in (.) 000 =.0-in (.) Unique Identifier M = 000 Series Size Motor G = 000 Series Size Motor with IDEA Drive M = 000 Series Size Motor Proprietary suffix assigned to a specific customer application. The identifier can apply to either a standard or custom part.

2 HAYD: 0 WGS0 / 000 Series Motors Dimensional Drawings WGS0 Linear Slide with Hybrid 000 Size linear motors are recommended for horizontal loads up to lbs ( N) Dimensions = (inches) mm M N ADDITIAL MOUNTING HOLES RECOMMENDED EVERY 0 inches (mm) FROM DRIVE END. CTACT HAYD KERK FOR EXACT LOCATIS OR CUSTOM LOCATIS. L R K J S X SINGLE STACK B DOUBLE STACK C P THRU P P D E Q X 8- UNC - B*.0 F OVERALL RAIL LENGTH = STROKE + D + F + G U TYP. G P THRU P P TYP. (MM) INCH -M SIZE A T (.).0 (.8).0 I (.).880 H (.9).98 (.9). (.).0 (.). (9.).8 (.).0.00 * METRIC THREADS ALSO AVAILABLE A B C D E F G H I J K L M N P P P Q R S T U (.) (9.) (8.) (.) (.8) (.0) (.0) (.9) (.) (.) (.) WGS0 Linear Slide with Hybrid 000 Size linear motors with programmable IDEA Drive Winding Voltage. VDC M N ADDITIAL MOUNTING HOLES RECOMMENDED EVERY 0 inches (mm) FROM DRIVE END. CTACT HAYD KERK FOR EXACT LOCATIS OR CUSTOM LOCATIS. R L Contact Haydon Kerk if a higher voltage motor is desired. K J S X SINGLE STACK B DOUBLE STACK C P THRU Q X 8- UNC - B* P THRU P P.0 P P TYP. U D E OVERALL RAIL LENGTH = STROKE + D + F + G F TYP. G A H T V Dimensions = (mm) inch I * METRIC THREADS ALSO AVAILABLE (MM) INCH A B C D E F G H I J K L M N P P P Q R S T U V (8.0) (.) (.) (.9) (.9) (.) (.) (9.) (.) (.) (9.) (8.) (.) (.8) (.0) (.0) (.9) (.) (.) (.) (.0) -G SIZE

3 HAYD: 0 WGS0 Motorized 000 Series Size Motors Specifications: Motorized WGS0 with Size Single Stack Hybrid Motor Size : mm (.-in) Hybrid Linear Actuator (.8 Step Angle) Programmable Drive IDEA Drive Option Available Unipolar** Not Applicable Winding Voltage Current (RMS)/phase Resistance/phase. VDC*. A. Ω 00 ma. Ω VDC 90 ma. Ω 00 ma. Ω VDC 90 ma. Ω Thread Lead inches mm Lead Code Size Single Stack with IDEA Drive Inductance/phase.9 mh 8. mh.0 mh. mh.0 mh Power Consumption W ** Unipolar drive gives approximately 0% less thrust than bipolar drive. Specifications: Motorized WGS0 with Size Double Stack Hybrid Motor Size Single Stack Size : mm (.-in) Double Stack Hybrid Linear Actuator (.8 Step Angle) Programmable Drive Winding Voltage Current (RMS)/phase Resistance/phase Inductance/phase Power Consumption. VDC*. A 0.9 Ω. mh * 000 Series Single Stack with IDEA programmable drive. Contact Haydon Kerk if higher voltage motor is desired. Thread Lead inches mm IDEA Drive Option Available. A.8 Ω 8. mh 0. W Hybrids: Stepping Sequence EXTEND CW Unipolar Step Q-Q Q Q-Q Q Q-Q Q Q-Q8 Q Note: Half stepping is accomplished by inserting an off state between transitioning phases RETRACT CCW VDC 90 ma. Ω. mh Lead Code Hybrids: RED RED / WHITE Q Q + V Q Q IDEA Drive software is simple to use with on-screen buttons and easy-to-understand programming guides. Size Double Stack BIPOLAR NS GREEN GREEN / WHITE Q Q + V Fully Programmable RoHS Compliant USB or RS-8 Communication Microstepping Capability Full, /, /, /8, /, /, / Graphic User Interface Auto-population of Drive Parameters Programmable Acceleration /Deceleration and Current Control Q Q8 + V For more information see the Haydon Kerk IDEA Drive Data Sheet RED BLACK UNIPOLAR NS WHITE RED/WH GREEN GRN/WH Q Q Q Q

4 HAYD: 0 WGS0 / 000 Series Motors Performance Curves Performance Curves: WGS0 with 000 Series Size Single Stack FORCE vs. PULSE RATE Chopper 00% Duty Cycle Force (lbs) in. (. mm) Lead 0. in. (.08 mm) Lead 0. in. (. mm) Lead Force shown is a total thrust force (acceleration, friction, miscellaneous drag forces).0 in. (. mm) Lead Force (N) (.) (.) (0.) Pulse Rate: in/sec (mm/sec) (.0) (.) Force shown is a total thrust force (acceleration, friction, miscellaneous drag forces) 0 (.8) Performance Curves: WGS0 with 000 Series Size Double Stack FORCE vs. PULSE RATE Chopper 00% Duty Cycle 0 80 Force (lbs) in. (. mm) Lead 0. in. (.08 mm) Lead 0. in. (. mm) Lead Force shown is a total thrust force (acceleration, friction, miscellaneous drag forces).0 in. (. mm) Lead Force (N) (.) (.) (0.) (.0) Pulse Rate: in/sec (mm/sec) (.) (.8) Force shown is a total thrust force (acceleration, friction, miscellaneous drag forces) NOTE: All chopper drive curves were created with a volt motor and a 0 volt power supply. 0 8 (0.)

5 HAYD: 0 WGS0 Motorized 000 Series Size Motors Specifications: Haydon 000 Series Size Single Stack Size : mm (.-in) Single Stack Hybrid Linear Actuator (.8 Step Angle) Unipolar** Winding Voltage Current (RMS)/phase Resistance/phase Inductance/phase..0 A. Ω. mh. A.8 Ω 0. mh VDC. A. Ω 8.0 mh. A.8 Ω. mh VDC. A. Ω. mh Power Consumption W Thread Lead inches mm Lead Code ** Unipolar drive gives approximately 0% less thrust than bipolar drive. Size Single Stack Specifications: Haydon 000 Series Size Double Stack Size : mm (.-in) Double Stack Hybrid Linear Actuator (.8 Step Angle) Winding Voltage Current (RMS)/phase Resistance/phase Inductance/phase Power Consumption..8 A 0.8 Ω. mh. A.0 Ω. mh W VDC A.0 Ω.0 mh Thread Lead inches mm Lead Code Dimensional Drawings: WGS0 with Size Motor Size Double Stack WGS0 Linear Slide with Hybrid 000 Size linear motors are recommended for horizontal loads up to lbs ( N) M N ADDITIAL MOUNTING HOLES RECOMMENDED EVERY 0 inches (mm) FROM DRIVE END. CTACT HAYD KERK FOR EXACT LOCATIS OR CUSTOM LOCATIS. R L K J S X P THRU Q X 8- UNC - B* P THRU P P.0 P P TYP. SINGLE STACK B OVERALL RAIL LENGTH = STROKE + D + F + G DOUBLE STACK C D E F U TYP. G A T H Dimensions = (mm) inch (MM) INCH -M SIZE (.).0 I (.).80 () (.9) (.9) (.) (.) (.) (.) * METRIC THREADS ALSO AVAILABLE A B C D E F G H I J K L M N P P P Q R S T U (.) (9.) (8.) (.) (.8) (.0) (.0) (.9) (.) (.) (.) (.)

6 HAYD: 0 WGS0 / 000 Series Motors Performance Curves Performance Curves: WGS0 with 000 Series Size Single Stack FORCE vs. PULSE RATE Chopper 00% Duty Cycle Force (lbs) in. (. mm) Lead 0. in. (.08 mm) Lead 0. in. (. mm) Lead.0 in. (. mm) Lead Force shown is a total thrust force (acceleration, friction, miscellaneous drag forces) Force (N) 0 0 (.) (.) (0.) (.0) Pulse Rate: in/sec (mm/sec) (.) (.8) Force shown is a total thrust force (acceleration, friction, miscellaneous drag forces) 0 8 (0.) Performance Curves: WGS0 with 000 Series Size Double Stack FORCE vs. PULSE RATE Chopper 00% Duty Cycle in. (. mm) Lead Force shown is a total thrust force (acceleration, friction, miscellaneous drag forces) 00 Force (lbs) in. (.08 mm) Lead 0. in. (. mm) Lead.0 in. (. mm) Lead Force (N) (.) Pulse Rate: in/sec (mm/sec) Force shown is a total thrust force (acceleration, friction, miscellaneous drag forces) NOTE: All chopper drive curves were created with a volt motor and a 0 volt power supply. (.) (0.) (.0) (.) 0 (.8)

7 HAYD: 0 Linear Rails: Properly Sizing A Linear Rail System Information needed to properly size a linear rail system Haydon Kerk Linear Rail Systems are designed to be precision motion devices. Many variables must be considered before applying a particular rail system in an application. The following is a basic checklist of information needed that will make it easier for the Haydon Kerk engineering team to assist you in choosing the proper linear rail. Linear Rail Application Checklist ) Maximum Load? _ (N or lbs.) ) Load Center of Gravity (cg) Distance and Height (mm or inches)? See illustrations (A) (B) (C) below. Dimensions ( mm / inch): (A) _... OR... (B) AND... (C) (A) (C) (B) ) Rail Mount Orientation? The force needed to move the load is dependent on the orientation of the load relative to the force of gravity. For example, total required force in the horizontal plane (D) is a function of friction and the force needed for load acceleration (F f + F a ). Total force in the vertical plane is a function of friction, load acceleration, and gravity (F f + F a + F g ). Orientation: (D) (E) (F) (G) (H)

8 HAYD: 0 Linear Rails: Properly Sizing A Linear Rail System Linear Rail Application Checklist (Continued) ) Stroke Length to Move Load? _ (mm or inches) Overall rail size will be a function of stroke length needed to move the load, the rail frame size (load capability), the motor size, and whether or not an integrated stepper motor programmable drive system is added. ) Move Profile? A trapezoidal move profile divided into equal segments (J) is a common move profile and easy to work with. Another common move profile is a triangular profile divided into equal segments (K). (J) (K) If using a trapezoidal (J) or triangular (K) move profile, the following is needed a) Point to point move distance (mm or inches) b) Move time (seconds) including time of acceleration and deceleration c) Dwell time between moves (seconds) The trapezoidal move profile (J) is a good starting point in helping to size a system for prototype work. A complex move profile (L) requires more information. a) Time (in seconds) including: T, T, T, T, T T n and T dwell b) Acceleration / Deceleration (mm/sec. or inches/sec. ) including: A, A, A A n For more information call Haydon Kerk Motion Solutions Engineering at 0. (L) 8

9 HAYD: 0 Linear Rails: Properly Sizing A Linear Rail System Linear Rail Application Checklist (Continued) ) Position Accuracy Required? (mm or inches) Accuracy is defined as the difference between the theoretical position and actual position capability of the system. Due to manufacturing tolerances in components, actual travel will be slightly different than theoretical commanded position. See figure (M) below. ) Position Repeatability Required? (mm or inches) Repeatability is defined as the range of positions attained when the rail is commanded to approach the same position multiple times under identical conditions. See figure (M) below. (M) 8) Positioning Resolution Required? (mm/step or inches/step) Positioning resolution is the smallest move command that the system can generate. The resolution is a function of many factors including the drive electronics, lead screw pitch, and encoder (if required). The terms resolution and accuracy should never be used interchangeably. 9) Closed-Loop Position Correction Required? YES NO In stepper motor-based linear rail systems, position correction is typically accomplished using a rotary incremental encoder (either optical or magnetic). 0) Life Requirement? (select the most important application parameter) a) Total mm or inches _... or... b) Number of Full Strokes _... or... c) Number of Cycles _ ) Operating Temperature Range _ ( C or F) a) Will the system operate in an environment in which the worst case temperature is above room temperature? b) Will the system be mounted in an enclosure with other equipment generating heat? ) Controller / Drive Information? a) Haydon Kerk IDEA Drive (with Size Stepper Motors only) b) Customer Supplied Drive... Type? Chopper Drive L / R Drive Model / Style of Drive: ) Power Supply Voltage? _ (VDC) )* Step Resolution? a) Full Step b) Half-Step c) Micro-Step )* Drive Current? _ (A rms / Phase) and _ (A peak / Phase) )* Current Boost Capability? _ (%) * If the Haydon Kerk IDEA Drive is used with 000 Series Size motor disregard items,, and. IDEA Drive not available for 000 Series Size motors. 9

RGS08 Linear Rails: RGS08 Non-Motorized With and Without Guide Screw. RGS08 Non-Motorized Linear Rails

RGS08 Linear Rails: RGS08 Non-Motorized With and Without Guide Screw. RGS08 Non-Motorized Linear Rails RGS08 RGS08 Non-Motorized With and Without Guide RGS08 Non-Motorized Linear Rails RG Series linear rails are available: RGS08 Non-Motorized, -driven linear rail RGS08 Non-Motorized linear rail without

More information

RGS06 Linear Rails: RGS06 Non-Motorized With and Without Guide Screw. RGS06 Non-Motorized Linear Rails

RGS06 Linear Rails: RGS06 Non-Motorized With and Without Guide Screw. RGS06 Non-Motorized Linear Rails on-motorized With and Without Guide on-motorized Linear Rails RG Series linear rails are available: on-motorized, -driven linear rail on-motorized, Wide format, -driven linear rail on-motorized, Wide format,

More information

Linear Shaft Motor Sizing Application Note

Linear Shaft Motor Sizing Application Note Linear Shaft Motor Sizing Application Note By Jeramé Chamberlain One of the most straightforward tasks in the design of a linear motion system is to specify a motor and drive combination that can provide

More information

X-LSM-E Series: Miniature motorized linear stages with built-in motor encoder and controllers

X-LSM-E Series: Miniature motorized linear stages with built-in motor encoder and controllers X-LSM-E Series: Miniature motorized linear stages with built-in motor encoder and controllers 25, 50, 100, 150, 200 mm travel 10 kg load capacity Up to 104 mm/s speed and up to 55 N thrust Built-in controller;

More information

X-LSM-SV1 Series: Low vacuum miniature motorized linear stages with built-in controllers

X-LSM-SV1 Series: Low vacuum miniature motorized linear stages with built-in controllers X-LSM-SV1 Series: Low vacuum miniature motorized linear stages with built-in controllers Vacuum compatible to 10-3 Torr 25, 50, 100, 150, 200 mm travel 10 kg load capacity Up to 100 mm/s speed and up to

More information

X-LRQ-SV2 Series: High vacuum motorized linear stages with built-in controllers

X-LRQ-SV2 Series: High vacuum motorized linear stages with built-in controllers X-LRQ-SV2 Series: High vacuum motorized linear stages with built-in controllers Vacuum compatible to 10-6 torr 75, 150, 300, 450, 600 mm travel 100 kg load capacity Up to 205 mm/s speed and up to 100 N

More information

SKF actuators available for quick delivery. Selection guide

SKF actuators available for quick delivery. Selection guide SKF actuators available for quick delivery Selection guide A wide range of SKF actuators available for quick delivery Industrial actuator 24 Volt DC Load range 1 000 to 4 000 N Speed range 5 to 52 mm/s

More information

X-LRT-EC Series: High-load, closed-loop stages with built-in stepper motors, motor encoders, controllers, and dust covers

X-LRT-EC Series: High-load, closed-loop stages with built-in stepper motors, motor encoders, controllers, and dust covers X-LRT-EC Series: High-load, closed-loop stages with built-in stepper motors, motor encoders, controllers, and dust covers 100, 250, 500, 750, 1000, 1500 mm travel 500 kg load capacity High cantilever stiffness

More information

PM Stepper Linear Actuator

PM Stepper Linear Actuator PM Stepper Linear ctuator PM Stepper motor Linear ctuators Overview Motor Maximum thrust Travel per step Rated power (mm) (N) (mm) (W) Φ Φ Φ36 3 6.6-.667.6-.3333.3-.7 3.4 3.9.6 Motor lead screw code schedule

More information

Selection Calculations For Linear & Rotary Actuators

Selection Calculations For Linear & Rotary Actuators H-8 For Electric Linear Slides and Electric Cylinders First determine your series, then select your product. Select the actuator that you will use based on the following flow charts: Selection Procedure

More information

6) Motors and Encoders

6) Motors and Encoders 6) Motors and Encoders Electric motors are by far the most common component to supply mechanical input to a linear motion system. Stepper motors and servo motors are the popular choices in linear motion

More information

FORMULAS FOR MOTORIZED LINEAR MOTION SYSTEMS

FORMULAS FOR MOTORIZED LINEAR MOTION SYSTEMS FOR MOTORIZED LINEAR MOTION SYSTEMS Haydon Kerk Motion Solutions Pittman Motors : 203 756 7441 : 267 933 2105 SYMBOLS AND UNITS Symbol Description Units Symbol Description Units a linear acceleration m/s

More information

Ball Reverser. Ball Reverser Actuator. FLENNOR Power Transmission Products. Patented

Ball Reverser. Ball Reverser Actuator. FLENNOR Power Transmission Products. Patented Ball Reverser FLENNOR Power Transmission Products Ball Reverser Actuator Patented Ball Reverser Principle General Information NORCO'S Ball Reverser Actuator is a unique actuator which provides automatic

More information

Engineering Reference

Engineering Reference Engineering Reference Sizing and Selection of Exlar Linear and Rotary Actuators Move Profiles The first step in analyzing a motion control application and selecting an actuator is to determine the required

More information

Ball screw. Linear. Coupling cover. 1Positioning table of a structure with enhanced sealing property. 3 High corrosion resistance

Ball screw. Linear. Coupling cover. 1Positioning table of a structure with enhanced sealing property. 3 High corrosion resistance Cleanroom Precision Positioning Table TC Ball screw TC EB Slide table inear Way Side cover Stainless sheet Motor bracket inear Coupling cover Pipe threads for suction connector Points ight weight, low

More information

U.S. Patents 6,290,217 6,244,579

U.S. Patents 6,290,217 6,244,579 CR CR Series Overview U.S. Patents 6,90,7 6,,579 For the best in vibration isolation capabilities, choose Enidine s. Smaller than traditional wire ropes, these unique isolators provide cost-effective,

More information

Linear guide drives. Synchronous shafts The use of synchronous shafts enables several linear axes to be operated with one drive.

Linear guide drives. Synchronous shafts The use of synchronous shafts enables several linear axes to be operated with one drive. Linear guide drives Drive concept The linear guides are driven via the hollow shaft in the drive head. The drive head is used to directly install a motor or alternatively (in connection with a center shaft)

More information

Selection Calculations For Motorized Actuators

Selection Calculations For Motorized Actuators Selection Calculations/ Selection Calculations For Linear Slides and Cylinders Select from the EZS Series, EZS Series for Cleanroom Use, EZC Series First determine your series, then select your model.

More information

Points. Precision Positioning Table TU. Variation. Major product specifications With flange

Points. Precision Positioning Table TU. Variation. Major product specifications With flange 9 0 Precision Positioning Table Ball screw inear Points lide table with high accuracy and high rigidity in a single structure lide table Compact and slim type positioning table with an original U-shaped

More information

Revision 1.0, January 2014 MICRONIX USA, LLC

Revision 1.0, January 2014 MICRONIX USA, LLC 2014 Edition Revision 1.0, January 2014 MICRONIX USA, LLC The information within regarding the MICRONIX USA Product Line and/or any other products and technology owned by MICRONIX USA, LLC are subject

More information

Single cam type. Double cam type. Grip force N. Type Model/size Stroke Screw type straight style. Screw type tee style

Single cam type. Double cam type. Grip force N. Type Model/size Stroke Screw type straight style. Screw type tee style Type Model/size Stroke -SS-0-N. -SS-0-N. Single cam type -SS- 7. -SS-. -SS-4. -SD-0 Double cam type -SD- -SD-4. Screw type straight style Screw type tee style -FS- -FT- -FS- -FT- 0.9 1. 1.. 1. 4 Grip forcen

More information

Chapter 7: Stepper Motors. (Revision 6.0, 27/10/2014)

Chapter 7: Stepper Motors. (Revision 6.0, 27/10/2014) Chapter 7 Stepper Motors (Revision 6.0, 7/10/014) 1. Stepping Angle Analysis The following analysis derives the formula for the stepping angle of the stepper motor. It has been reproduced and edited from

More information

Panel Mount, Single Phase 120 and 240 Volt Fixed Shaft (click blue text for more details)

Panel Mount, Single Phase 120 and 240 Volt Fixed Shaft (click blue text for more details) Staco Energy Products Co. has been a leading manufacturer of variable transformers for over 60 years, building standard as well as custom-designed products for industrial, commercial and military applications.

More information

EUROMASTER HYDRAULIC PRESSBRAKES

EUROMASTER HYDRAULIC PRESSBRAKES EUROMASTER HYDRAULIC PRESSBRAKES EUROMASTER HYDRAULIC PRESSBRAKES 02_ EUROMASTER Euromaster 50250 The Euromaster has been developed as a modern pressbrake with electronic levelling and depth control Synchro

More information

Controlling Thermal Expansion

Controlling Thermal Expansion Controlling Thermal Expansion Strategies for Maximizing the Repeatability of your Linear Stage By David Goosen, Mechanical Engineering Team INTRODUCTION Most of us are aware that all common engineering

More information

Product description. Compact Modules. Characteristic features. Further highlights

Product description. Compact Modules. Characteristic features. Further highlights 4 Compact Modules Product description Characteristic features Five fine-tuned sizes based on a compact precision aluminum profile with two integrated pre-tensioned ball rail systems Identical external

More information

TE 75R RESEARCH RUBBER FRICTION TEST MACHINE

TE 75R RESEARCH RUBBER FRICTION TEST MACHINE TE 75R RESEARCH RUBBER FRICTION TEST MACHINE Background: The Research Rubber Friction Test Machine offers the ability to investigate fully the frictional behaviour of rubbery materials both in dry and

More information

5484BN/R7DC-AHJB/XR/MS(ELA)

5484BN/R7DC-AHJB/XR/MS(ELA) Features High luminous intensity output Oval Shape Well defined spatial radiation Wide viewing angle (2θ 1/2 ) : 110 / 40 UV resistant epoxy The product itself will remain within RoHS compliant version

More information

Remote Display Unit. Installers Handbook Copyright 2001 AirSense Technology Ltd. LM Remote Display Unit Installers Handbook Issue 1.

Remote Display Unit. Installers Handbook Copyright 2001 AirSense Technology Ltd. LM Remote Display Unit Installers Handbook Issue 1. Remote Display Unit Installers Handbook Copyright 2001 AirSense Technology Ltd AirSense, ClassiFire, FastLearn PipeCAD, SenseNET, Stratos-HSSD and Stratos-Quadra are trademarks. HSSD is a Registered Trademark.

More information

R-Plus System Frontespizio_R_PlusSystem.indd 1 11/06/ :32:02

R-Plus System Frontespizio_R_PlusSystem.indd 1 11/06/ :32:02 R-Plus System R-Plus System R-Plus system R-Plus system description Fig. R-Plus system R-Plus System is Rollon s series of rack & pinion driven actuators. Rollon R-Plus System series linear units are designed

More information

C-Lube Linear Way ML ML MLF

C-Lube Linear Way ML ML MLF Maintenance ree & U.S. PTTD C-Lube Linear ay Variation of C-Lube Linear ay Shape Length of slide unit Model code C-Lube Linear ay is a linear motion rolling guide, incorporating the C-Lube as a components

More information

PM Stepper Linear Actuator

PM Stepper Linear Actuator www.dingsmotion.com PM Stepper Linear ctuator Changzhou DINGS' Electrical 常州市鼎智机电有限公司 & Mechanical Co., Ltd. PM Stepper motor Linear ctuators Overview Motor Maximum thrust Travel per step Rated power (mm)

More information

D5.2 Type. Draw wire mechanics with incremental encoder. Measuring length max. 2 m. Compact and simple. Order code draw wire encoder

D5.2 Type. Draw wire mechanics with incremental encoder. Measuring length max. 2 m. Compact and simple. Order code draw wire encoder with incremental encoder Draw wire encoder A40 Traverse speed max. 0.8 m/s The draw wire system A40 with incremental encoder excels with its compact construction. RoHS Compact and simple Measuring length

More information

Q-Motion Precision Linear Stage

Q-Motion Precision Linear Stage Q-Motion Precision Linear Stage High Forces and Small Design Due to Piezo Motors Q-545 Only 45 mm in width Push/pull force 8 N Incremental sensors with position resolution XY combinations without adapter

More information

Calculating the Applied Load

Calculating the Applied Load The LM Guide is capable of receiving loads and moments in all directions that are generated due to the mounting orientation, alignment, gravity center position of a traveling object, thrust position and

More information

APPENDIX. SELECTING THE SureServo SERVO SYSTEM. In This Appendix... Selecting the SureServo Servo System...B 2. Leadscrew - Example Calculations...

APPENDIX. SELECTING THE SureServo SERVO SYSTEM. In This Appendix... Selecting the SureServo Servo System...B 2. Leadscrew - Example Calculations... SELECTING THE SureServo SERVO SYSTEM APPENDIX B In This Appendix... Selecting the SureServo Servo System............B 2 The Selection Procedure......................................B 2 How many pulses

More information

LINE TECH Linear Modules. Ready to built-in linear modules with drive

LINE TECH Linear Modules. Ready to built-in linear modules with drive Ready to built-in linear modules with drive Anodized profile, produced in extrusion molding method Linear rail guiding system (LM3 LM5) Actuation by ball screw, high-helix lead _ screw or toothed belt

More information

STUD & TRACK ROLL FORMING MACHINE

STUD & TRACK ROLL FORMING MACHINE STUD & TRACK ROLL FORMING MACHINE R O L L F O R M E R S U S A I W W W. R O L L F O R M E R S - U S A. C O M Page1 Cantilevered Dual Headed 6,000 lb Decoiler Includes mandrel and stand Can accommodate 22

More information

Technical Guide for Servo Motor Selection

Technical Guide for Servo Motor Selection Technical Guide for Servo otor Selection CS_Servo Selection_TG_E_3_1 Servo otor Selection Software Use your PC to select a Servo otor "otor Selection Program for Windows" o you always feel "Calculation

More information

NR ROTARY RING TABLE: FLEXIBLE IN EVERY RESPECT

NR ROTARY RING TABLE: FLEXIBLE IN EVERY RESPECT NR FREELY PROGRAMMABLE ROTARY TABLES NR ROTARY RING TABLE All NR rings allow customer-specific drive motors to be connected NR ROTARY RING TABLE: FLEXIBLE IN EVERY RESPECT WHEN IT S GOT TO BE EXACT We

More information

Product Description. Further highlights. Outstanding features. 4 Bosch Rexroth Corporation Miniature Linear Modules R310A 2418 (2009.

Product Description. Further highlights. Outstanding features. 4 Bosch Rexroth Corporation Miniature Linear Modules R310A 2418 (2009. 4 Bosch Rexroth orporation Miniature Linear Modules R310A 2418 (2009.05) Product Description Outstanding features Rexroth Miniature Linear Modules are precise, ready-to-install linear motion systems that

More information

Power Resistor for Mounting onto a Heatsink Thick Film Technology

Power Resistor for Mounting onto a Heatsink Thick Film Technology DIMENSIONS in millimeters Power Resistor for Mounting onto a Heatsink Thick Film Technology FEATURES 800 W at 85 C bottom case temperature Wide resistance range: 0.3 Ω to 900 kω E24 series Non inductive

More information

EE 410/510: Electromechanical Systems Chapter 4

EE 410/510: Electromechanical Systems Chapter 4 EE 410/510: Electromechanical Systems Chapter 4 Chapter 4. Direct Current Electric Machines and Motion Devices Permanent Magnet DC Electric Machines Radial Topology Simulation and Experimental Studies

More information

Power Resistor for Mounting onto a Heatsink Thick Film Technology

Power Resistor for Mounting onto a Heatsink Thick Film Technology DIMENSIONS in millimeters Power Resistor for Mounting onto a Heatsink Thick Film Technology FEATURES 300 W at 85 C bottom case temperature Wide resistance range: 0.3 Ω to 900 kω E24 series Non inductive

More information

Agilent HLMP-FWxx 5mm Extra Bright Flat Top InGaN White LED Lamps. Data Sheet

Agilent HLMP-FWxx 5mm Extra Bright Flat Top InGaN White LED Lamps. Data Sheet Agilent HLMP-FWxx 5mm Extra Bright Flat Top InGaN White LED Lamps. Data Sheet HLMP-FW66, HLMP-FW67 Description These high intensity white LED lamps are based on InGaN material technology. A blue LED die

More information

MODEL NAME : LLDMWW0-15K*0*A

MODEL NAME : LLDMWW0-15K*0*A Eagle Eye (Outdoor LED Module) Application Note MODEL NAME : LLDMWW0-15K*0*A RoHS Compliant HALOGEN FREE (30)-4022 1 / 16 CONTENTS 1. Product Description 3/16 2. Specifications 2.1. Chromaticity Bins for

More information

I-FORCE Ironless linear motors

I-FORCE Ironless linear motors I-FORCE Ironless linear motors Parker Trilogy s I-Force ironless linear motors offer high forces and rapid accelerations in a compact package. With forces ranging from 5.5 lbf (24.5 N) - 197.5 lbf (878.6

More information

Stepping Motors. Chapter 11 L E L F L D

Stepping Motors. Chapter 11 L E L F L D Chapter 11 Stepping Motors In the synchronous motor, the combination of sinusoidally distributed windings and sinusoidally time varying current produces a smoothly rotating magnetic field. We can eliminate

More information

Gurley Model A58 Absolute Encoder

Gurley Model A58 Absolute Encoder Gurley Model Absolute Encoder Motion Type: Rotary Usage Grade: Industrial Output: Absolute Resolution: - Bit The model encoder is a single-turn absolute rotary encoder with opto-electronic technology This

More information

CM1000DUC-34SA. Mega Power Dual IGBT 1000 Amperes/1700 Volts

CM1000DUC-34SA. Mega Power Dual IGBT 1000 Amperes/1700 Volts CM1DUC-34SA Powerex, Inc., 173 Pavilion Lane, Youngwood, Pennsylvania 15697 (724) 925-7272 www.pwrx.com 1 Amperes/17 Volts A P D (8 PLACES) G U H H N S L K C2 C2E1 C1 W X J F BB G2 E2 E1 G1 Y C B Z E CC

More information

DRS 61: Incremental encoders, number of lines and zero pulse width freely programmable DRS 60: Incremental Encoders with Zero-Pulse-Teach

DRS 61: Incremental encoders, number of lines and zero pulse width freely programmable DRS 60: Incremental Encoders with Zero-Pulse-Teach NEW DRS : Incremental encoders, number of lines and zero pulse width freely programmable DRS : s with Zero-Pulse-Teach Further highlights of this generation of encoders: Simple zero-pulse-teach by pressing

More information

Selecting the SureStep Stepping System...C 2

Selecting the SureStep Stepping System...C 2 SELECTING THE SureStep STEPPING SYSTEM APPENDIX C In This Appendix... Selecting the SureStep Stepping System.............C 2 The Selection Procedure..............................C 2 How many pulses from

More information

CTV series CHARACTERISTICS LINEAR UNITS

CTV series CHARACTERISTICS LINEAR UNITS CTV series CHARACTERISTICS The CTV series describes s with a precision ball screw drive and two parallel, integrated, Zerobacklash rail guides. Compact dimensions allow high performance features such as,

More information

Power Resistors, for Mounting onto a Heatsink Thick Film Technology

Power Resistors, for Mounting onto a Heatsink Thick Film Technology RCH Manufactured in cermet thick fi lm technology, these power resistors exhibit remarkable characteristics and the series includes 4 types ranging from 5 W to 50 W Designed to be mounted onto a heatsink,

More information

Power Resistor for Mounting onto a Heatsink Thick Film Technology

Power Resistor for Mounting onto a Heatsink Thick Film Technology DIMENSIONS in millimeters Power Resistor for Mounting onto a Heatsink Thick Film Technology FEATURES LPS high power: 1 W Wide resistance range: 1 Ω to 1.3 kω E24 series Non inductive Easy mounting Low

More information

EUCLID M2 MIRROR MECHANISM

EUCLID M2 MIRROR MECHANISM EUCLID M2 MIRROR MECHANISM Aiala Artiagoitia (1), Carlos Compostizo (1), Laura Rivera (1) (1) SENER, Av. Zugazarte 56, 48930 Las Arenas (Bizkaia) Spain, Email: aiala.artiagoitia@sener.es ABSTRACT Euclid

More information

Design Guidelines for SFT Chipsets Assembly

Design Guidelines for SFT Chipsets Assembly Design Guidelines for SFT Chipsets Assembly SFT-10 SFT-16 SFT-20 Table of Contents 1. Design Guidelines 2 1.1 Electrical Insulation 2 1.2 Thermal Management 3 2. Available Reference Designs for Thermal

More information

Cam Roller Guides. The Drive and Control Company. Service Automation. Electric Drives and Controls. Linear Motion and Assembly Technologies

Cam Roller Guides. The Drive and Control Company. Service Automation. Electric Drives and Controls. Linear Motion and Assembly Technologies Industrial Hydraulics Electric Drives and Controls Linear Motion and Assembly Technologies Pneumatics Service Automation Mobile Hydraulics Cam Roller Guides The Drive and Control Company Linear Motion

More information

Linear measuring technology

Linear measuring technology Their extremely robust construction, their high IP69k protection level and their wide temperature range make these new draw wire encoders particularly reliable and durable. Their flexibility and adaptability

More information

System Components. Electric Motors.

System Components. Electric Motors. System Components Electric Motors www.powerjacks.com Contents.1. Electric Motors.1.1. AC Motors.1.. AC Motor Performance 0 rpm ( pole).1.. AC Motor Performance 00 rpm ( pole).1.. AC Motors with Integral

More information

ISSPRO 3 3/8 Programmable Tachometer High Performance EV Line Part Numbers R5535M, R6535M

ISSPRO 3 3/8 Programmable Tachometer High Performance EV Line Part Numbers R5535M, R6535M General Information: I n c o r p o r a t e d ISSPRO 3 3/8 Programmable Tachometer High Performance EV Line Part Numbers R5535M, R6535M ISSPRO, INC. 2515 N.E. Riverside Way, Portland OR 97211 Telephone:

More information

SPECIFICATION WHITE SIDE VIEW LED. Customer. Approved by Approved by Approved by / / / Supplier. Drawn by Checked by Approved by / / /

SPECIFICATION WHITE SIDE VIEW LED. Customer. Approved by Approved by Approved by / / / Supplier. Drawn by Checked by Approved by / / / SPECIFICATION ITEM MODEL WHITE SIDE VIEW LED CUSTOMER Customer Approved by Approved by Approved by / / / Supplier Drawn by Checked by Approved by / / / Contents 1. Features 2. Applications 3. Absolute

More information

ATC 200 A Series BX Ceramic Multilayer Capacitors

ATC 200 A Series BX Ceramic Multilayer Capacitors 200 A Series BX Ceramic Multilayer Capacitors Case A Size Capacitance Range (.055" x.055") 5 pf to 0.01 µf Low ESR/ESL Mid-K Rugged High Reliability Construction Extended VDC Available, the industry leader,

More information

Bettis RGS F-Series. Quarter-Turn Spring-Return (SR) and Double-Acting (DA) Pneumatic Actuators. Product Data Sheet RGS Rev.

Bettis RGS F-Series. Quarter-Turn Spring-Return (SR) and Double-Acting (DA) Pneumatic Actuators. Product Data Sheet RGS Rev. Bettis RGS F-Series Quarter-Turn Spring-Return (SR) and Double-Acting (DA) Pneumatic Actuators Output Torques to 500,000 in-lb (56,492 N m) Ductile Iron or Stainless-Steel Construction Temperatures from

More information

Precision Ball Screw/Spline

Precision Ball Screw/Spline 58-2E Models BNS-A, BNS, NS-A and NS Seal Outer ring Shim plate Seal Spline nut Seal Collar Shim plate Seal End cap Ball Outer ring Ball screw nut Outer ring Ball Retainer Retainer Outer ring Point of

More information

Technical Data Sheet 3ψ Infrared Piranha

Technical Data Sheet 3ψ Infrared Piranha Technical Data Sheet 3ψ Infrared Piranha Features High reliability High total radiated power Peak wavelength λp=730nm Low forward voltage Pb free The product itself will remain within RoHS compliant version.

More information

Selection of precision micro drives

Selection of precision micro drives Selection of precision micro drives Overview Drive System and Selection DC and EC motors Motor data sheets, motor theory Motor gearhead selection 2017 maxon motor ag, Sachseln, Switzerland Media The Selection

More information

LO-COG DC Gearmotors. Series GM8000. Series GM9000. Series GM BULLETIN LCG Series GM8000, GM9000, GM Power Your Ideas

LO-COG DC Gearmotors. Series GM8000. Series GM9000. Series GM BULLETIN LCG Series GM8000, GM9000, GM Power Your Ideas BULLETIN LCG Series GM8, GM9, GM149 LO-COG DC Gearmotors Pittman brand LO-COG brush-commutated DC gearmotors offer smooth, quiet operation and long life. LO-COG gearmotors feature sintered steel spur gears

More information

Piezo Engineering Primer

Piezo Engineering Primer . The Direct and Inverse Piezoelectric Effect In 88, while performing experiments with tourmaline, quartz, topaz, cane sugar and Rochelle salt crystals, Pierre and Jacques Curie discovered that when mechanical

More information

1 Linear feeder 2 Track 3 Cover 4 Side plate 5 Trim weight 6 Sub-structure. 8 Feeding technology afag.com

1 Linear feeder 2 Track 3 Cover 4 Side plate 5 Trim weight 6 Sub-structure. 8 Feeding technology afag.com Linear feeder Track Cover Side plate Trim weight Sub-structure 8 Feeding technology 0 Linear feeder Linear feeder Linear feeder HLF-M Linear feeder HLF-P 8 Control devices PSG Accessory HLF Linear feeder

More information

Identification system for short product names. Changes/amendments at a glance. 2 Bosch Rexroth AG OBB omega modules R ( )

Identification system for short product names. Changes/amendments at a glance. 2 Bosch Rexroth AG OBB omega modules R ( ) Omega Modules OBB 2 OBB omega modules R9990079 (206-05) Identification system for short product names Short product name Example: O B B - 085 - N N - System = Omega module Guideway = Ball Rail System Drive

More information

SKA DDL IRON CORE LINEAR MOTORS. Direct Drive Technology

SKA DDL IRON CORE LINEAR MOTORS. Direct Drive Technology Direct Drive Technology SKA DDL IRON CORE LINEAR MOTORS Copyright 2007 Motor Power Company. All rights reserved. Contents are subjected to change without any notice. Edition 05/12 SKA DDL LINEAR MOTOR

More information

Identification Number

Identification Number Identification Number The specification of Micro Linear Way LWL is specified by the identification number, which consists of a model code, a size, a part code, a preload symbol, a classification symbol,

More information

N-Channel Enhancement-Mode Vertical DMOS FET

N-Channel Enhancement-Mode Vertical DMOS FET N-Channel Enhancement-Mode Vertical DMOS FET Features Free from secondary breakdown Low power drive requirement Ease of paralleling Low C ISS and fast switching speeds Excellent thermal stability Integral

More information

CL-L102-C7D. 1. Scope of Application. These specifications apply to LED package, model CL-L102-C7D. 2. Part code

CL-L102-C7D. 1. Scope of Application. These specifications apply to LED package, model CL-L102-C7D. 2. Part code Specification sheet 1/10 1. Scope of Application These specifications apply to LED package, model. 2. Part code Series L102 : High power LED for general lighting Watt Class C7 : 7 watt class package Lighting

More information

3mm Photodiode PD204-6B

3mm Photodiode PD204-6B 3mm Photodiode Features Fast response time High photo sensitivity Small junction capacitance Pb free This product itself will remain within RoHS compliant version. Description is a high speed and high

More information

Miniature (SEB Type) Tapped-Hole rail Types: Slide guides with clearance holes are standard and tapped holes are available upon request.

Miniature (SEB Type) Tapped-Hole rail Types: Slide guides with clearance holes are standard and tapped holes are available upon request. Miniature (SE Type) The SE type slide guide is a linear motion bearing in which the ball elements roll along two tracking grooves. This is the smallest and lightest slide guide series offered by Nippon

More information

Nanomotion Precision Piezo Ceramic Motors

Nanomotion Precision Piezo Ceramic Motors Nanomotion Precision Piezo Ceramic Motors The Company Nanomotion was founded in 1992 Developed enabling technology for ultrasonic piezo-ceramic motors Entered the market in 1996, selling products to leading

More information

Acceleration and velocity are related and have a direct impact on the three basic parts of the CNC system.

Acceleration and velocity are related and have a direct impact on the three basic parts of the CNC system. Acceleration and velocity are related and have a direct impact on the three basic parts of the CNC system. ACCELERATION Acceleration is a change in velocity with respect to time. The term, in context of

More information

2.3. Rockers. Contents

2.3. Rockers. Contents . SVRSealed Vehicle SVRSealed Vehicle Rocker Contents Description SVRSealed Vehicle Above Panel Rocker Switch............... Below Panel Rocker Switch............... Technical Data and Specifications..........

More information

N-Channel Enhancement-Mode Vertical DMOS FET

N-Channel Enhancement-Mode Vertical DMOS FET N-Channel Enhancement-Mode Vertical DMOS FET Features Free from secondary breakdown Low power drive requirement Ease of paralleling Low C ISS and fast switching speeds Excellent thermal stability Integral

More information

Piezo Theory: Chapter 1 - Physics & Design

Piezo Theory: Chapter 1 - Physics & Design Piezoelectric effect inverse piezoelectric effect The result of external forces to a piezoelectric material is positive and negative electrical charges at the surface of the material. If electrodes are

More information

Product data sheet Palas Nanoparticle measurement system DEMC 2000

Product data sheet Palas Nanoparticle measurement system DEMC 2000 Product data sheet Palas Nanoparticle measurement system DEMC 2000 Applications Aerosol science Calibration of condensation particle counters (CPC) Monodisperse particle source System component of an SMPS

More information

DS Tap Silicon Delay Line FEATURES PIN ASSIGNMENT. PIN DESCRIPTION TAP 1 TAP 5 TAP Output Number +5 Volts

DS Tap Silicon Delay Line FEATURES PIN ASSIGNMENT. PIN DESCRIPTION TAP 1 TAP 5 TAP Output Number +5 Volts DS00 -Tap Silicon Delay Line FEATURES All-silicon time delay taps equally spaced Delay tolerance ± ns or ±%, whichever is greater Stable and precise over temperature and voltage range Leading and trailing

More information

CM200EXS-24S. Chopper IGBT NX-Series Module 200 Amperes/1200 Volts

CM200EXS-24S. Chopper IGBT NX-Series Module 200 Amperes/1200 Volts CM2EXS-24S Powerex, Inc., 173 Pavilion Lane, Youngwood, Pennsylvania 15697 (724) 925-7272 www.pwrx.com Chopper IGBT NX-Series Module 2 Amperes/12 Volts A D K F G J E H J S T U 6 5 4 3 M 7 2 L N AL (4 PLACES)

More information

AUTOMOTIVE CURRENT TRANSDUCER OPEN LOOP TECHNOLOGY HC6H 400-S/SP1

AUTOMOTIVE CURRENT TRANSDUCER OPEN LOOP TECHNOLOGY HC6H 400-S/SP1 AUTOMOTIVE CURRENT TRANSDUCER OPEN LOOP TECHNOLOGY HC6H 400-S/SP1 Picture of product with pencil Introduction The HC6H family is for the electronic measurement of DC, AC or pulsed currents in high power

More information

EVERLIGHT ELECTRONICS CO., LTD.

EVERLIGHT ELECTRONICS CO., LTD. Lead (Pb) Free Product - RoHS Compliant Feature Piranha package. Colorless clear resin. Low thermal resistance Packaged in tubes for automatic insertion equipment. Total flux: 7150 to 14250 mlm at 70mA.

More information

Power Resistor for Mounting onto a Heatsink Thick Film Technology

Power Resistor for Mounting onto a Heatsink Thick Film Technology Power Resistor for Mounting onto a Heatsink Thick Film Technology FEATURES LPS high power: 1100 W Wide resistance range: 1 to 1.3 k E24 series Non inductive Easy mounting Low thermal radiation of the case

More information

Servo Motor Selection Flow Chart

Servo Motor Selection Flow Chart Servo otor Selection Flow Chart START Selection Has the machine Been Selected? YES NO Explanation etermine the size, mass, coefficient of References friction, and external forces of all the moving part

More information

Commercial Chip - C0G 16Vdc to 10kVdc

Commercial Chip - C0G 16Vdc to 10kVdc Commercial Chip - CG 16Vdc to 1kVdc A range of commercial MLC chip capacitors in Ultra stable EIA Class I CG, or NP, dielectric. CG chips are used in precision circuitry requiring Class I stability and

More information

E D D Y C U R R E N T D A M P E R A P P L I C AT I O N D ATA

E D D Y C U R R E N T D A M P E R A P P L I C AT I O N D ATA E D D Y C U R R E N T D A M P E R A P P I C AT I O N D ATA CDA InterCorp CDA InterCorp INTRODUCTION This application manual defines the performance capabilities of CDA InterCorp s Eddy Current Damper Product

More information

Agilent HLMP-CW18, HLMP-CW19, HLMP-CW28, HLMP-CW29, HLMP-CW38, HLMP-CW39 T-1 3/4 Precision Optical Performance White LED Data Sheet

Agilent HLMP-CW18, HLMP-CW19, HLMP-CW28, HLMP-CW29, HLMP-CW38, HLMP-CW39 T-1 3/4 Precision Optical Performance White LED Data Sheet Agilent HLMP-CW18, HLMP-CW19, HLMP-CW28, HLMP-CW29, HLMP-CW38, HLMP-CW39 T-1 3/4 Precision Optical Performance White LED Data Sheet Description These Super Bright Precision Optical Performance LED lamps

More information

N-Channel Enhancement-Mode Vertical DMOS FETs

N-Channel Enhancement-Mode Vertical DMOS FETs VN16 N-Channel Enhancement-Mode Vertical DMOS FETs Features Free from secondary breakdown Low power drive requirement Ease of paralleling Low C ISS and fast switching speeds High input impedance and high

More information

THERMAL FIELD ANALYSIS IN DESIGN AND MANUFACTURING OF A PERMANENT MAGNET LINEAR SYNCHRONOUS MOTOR

THERMAL FIELD ANALYSIS IN DESIGN AND MANUFACTURING OF A PERMANENT MAGNET LINEAR SYNCHRONOUS MOTOR THERMAL FIELD ANALYSIS IN DESIGN AND MANUFACTURING OF A PERMANENT MAGNET LINEAR SYNCHRONOUS MOTOR Petar UZUNOV 1 ABSTRACT: The modern Permanent Magnet Linear Synchronous Motors (PMLSM) has a wide range

More information

SPECIFICATIONS OF CITILIGHT 1 / Scope of Application These specifications apply to chip type LED lamp, CITILIGHT, model CL-822 -U1D-T.

SPECIFICATIONS OF CITILIGHT 1 / Scope of Application These specifications apply to chip type LED lamp, CITILIGHT, model CL-822 -U1D-T. SPECIFICATIONS OF 1 / 11 1. Scope of Application These specifications apply to chip type LED lamp,, model CL-822 -U1D-T. 2. Part code C L - 8 2 2 - U 1 D - T Series 822 : White LED for general lighting.

More information

Jumbo Cross Beam Ionizer

Jumbo Cross Beam Ionizer Jumbo Cross Beam Ionizer Version 1.0 September 30, 2008 Page 1 of 19 Table of Contents Cross Beam Ionizer... 1 Table of Contents... 2 1.0 Packing List... 3 1.1 Packing List for Cross Beam Ionizer... 3

More information

Selection table for guided systems (crank driven)

Selection table for guided systems (crank driven) Selection table for guided systems (crank driven) One mass shaker brute-force system One mass shaker natural frequency system Two mass shaker fast-runner system with reaction force-compensation Single

More information

EXACTNESS IN THE NANOMETER RANGE USED TO BE A UTOPIAN AND THEN THERE WAS PRECIMAR

EXACTNESS IN THE NANOMETER RANGE USED TO BE A UTOPIAN AND THEN THERE WAS PRECIMAR - EXACTNESS IN THE NANOMETER RANGE USED TO BE A UTOPIAN IDEAL AND THEN THERE WAS PRECIMAR The Precimar product family specializes in high-precision dimensional metrology for absolute and relative measurements.

More information

Inverted Pendulum System

Inverted Pendulum System Introduction Inverted Pendulum System This lab experiment consists of two experimental procedures, each with sub parts. Experiment 1 is used to determine the system parameters needed to implement a controller.

More information

Dry System (Twin and DR Type Bearings) Lubricated System (Twin Type Bearings) Lubricated System (DR Type Bearings)

Dry System (Twin and DR Type Bearings) Lubricated System (Twin Type Bearings) Lubricated System (DR Type Bearings) This data sheet interacts with PRT2 Catalogue 54-56 Hepcootion No. 3 Load Life Information The load capacity and life expectancy of Hepcootion ring slides, segments and track systems is determined by many

More information