BSD MODULFLEX R Torsionally Rigid Couplings

Size: px
Start display at page:

Download "BSD MODULFLEX R Torsionally Rigid Couplings"

Transcription

1 BSD MODULFLEX R Torsionally Rigid Couplings for T1F Torque Flange View B Thread opening turned in sectionel plane b b 6 b 7 b 2 b 8 b 3 b za View A A B NVm 1 NVm View A btot Reference dimension X X 2 NVm 1 knvm 2 knvm NVm 3 knvm knvm 1 knvm Dimensions Nom. Coupling Torque flange T Kmax d H7 zk d K d zm d M d G b tot b b 6 b 7 b 8 X d za d F d B b 2 b 3 b za Y g M8 7 g M g g M k g6 M g M12 2k M k g M12 g M14 k k g M g M18 B6-6. en

2 Technical Data T1F Article number (rated) torque Maximum rotation speed 1) Limit torque Oscillation bandwith (torque) DIN 1 (peak-topeak) Weight of the coupling Mass moment of inertia J (without torque flange) Rotational rigidity C T tot (without torque flange) (rpm) (kg) (kgm 2 ) (1 6 N m/rad) k k k k k 1) The specified values were ascertained in an available machine plant. The maximum rotation speed and resonance s are closely related to the running characteristics and quadratic response of the whole machine plant in which the torque gauging flange and coupling set are used. Note that resonance s may change in accordance with the stable and unstable ratios occurring in different machine plants. Permitted shaft end misalignment Max. permitted axial misalignment of coupling half members Max. permitted radial misalignment of coupling half members Angular displacement, D K W K a (deg.) k 2k 3k k 1k K r The compliance values quoted are maxima when there is compliance in one direction only. If several compliance characteristics are required simultaneously during operation, compliance values are reduced in accordance with diagram 1: Diagram 1 K a Applicable norms and standards: Coupling characteristics in accordance with DIN 74, Part 2, Section 2.1. Loading quantities in accordance with DIN 74, Part 2, Sections 2.2 and 3 (Coupling design for special applications). HBM 2 B6-6. en

3 Diagram: axial and radial displacement N m 1 N m N m 1 N m N m N m. 2 N m N m kn m kn m B6-6. en 3 HBM

4 Diagram: axial and radial displacement (continued) kn m kn m kn m kn m kn m 1 kn m kn m 3 1 kn m HBM 4 B6-6. en

5 General notes on installation The laminated packaging of the couplings must not be overstressed beyond the specified permitted compliance values. Installation position The BSD-MODULFLEX coupling can be operated in any installation position (horizontally or vertically) with the T1F/... torque flange. During vertical operation, ensure that the permitted axial force is not exceeded due to the masses present in the test rig. Delivery state a) If the T1F has been ordered complete with coupling (Code 6: Y; see data sheet B121-x.x en), the coupling will be fitted to the torque flange at HBM. Couplings and the torque flange are individually balanced in accordance with DIN ISO194 quality levels G 2. (coupling) and G 6.3 (torque flange). Screws for connecting the coupling and torque flange are included in the list of components supplied. b) If the T1F has been ordered without coupling (Code 6: N), the coupling may be re-ordered individually. Installation For perfect function it is essential to conform to reference dimension b tot. If the coupling and torque flange are separate when delivered (see delivered status A), you must first fit the coupling to the torque flange before installing the combined unit in the shaft run. Use only screws of the type specified in table 1. (fillister-head screws DIN EN ISO (Nom. 1 kn m DIN EN ISO ), black, oiled, µ tot =.12). Clean the flange and degrease it with a solvent (e.g. acetone). First of all tighten the screws crosswise with half tightening torque. Then tighten them crosswise again with full tightening torque (for tightening torque see table 1). Then install the combined unit in the shaft run. First of all tighten the screws crosswise with half tightening torque. Then tighten them crosswise again with full tightening torque (for tightening torque see table 2). Caution: The connecting screws on the user side must not impede the function of the couplings (see maximum screwed-in depth, table 2). After installation, please check that the couplings are not deformed. 1 Number of screws Fillister head screw DIN EN ISO bk/oiled /m tot =.12 Prescribed tightening torque Weight of screw (kg/piece) M6x M8x M12x k 8 M12x k M14x k M14x4.69 k M18x k M18x (DIN EN ISO ) Table 1: Screws for connecting coupling to torque flange T1F (View B) 1 Number of screws Fastening screws strength class 1.9 Prescribed tightening torque Maximum screwed in depth 4 M M M k 1. 2 k M k M k 16 1 k M Table 2: Fastening screws for coupling and test rig (View A) More notes on fitting can be found in the mounting instructions for the T1F torque flange. B6-6. en HBM

6 Modifications reserved. All details describe our products in general form only. They are not to be understood as express warranty and do not constitute any liability whatsoever. B6-6. en Hottinger Baldwin Messtechnik GmbH Im Tiefen See 4, D Darmstadt, Germany Tel.: ; Fax: E mail: support@hbm.com

T20WN. Data Sheet. Torque transducers. Special features. Installation example with bellows couplings. B en

T20WN. Data Sheet. Torque transducers. Special features. Installation example with bellows couplings. B en T20WN Torque transducers Data Sheet Special features - Nominal (rated) torques 0.1 N m, 0.2 N m, 0. N m, 1 N m, 2 N m, N m, 10 N m, 20 N m, 0 N m, 100 N m, 200 N m - Accuracy class: 0.2 - Contactless transmission

More information

TOP Transfer. Data Sheet. Force transfer standard. Special characteristics. D 20.TOPTRANS.10 en

TOP Transfer. Data Sheet. Force transfer standard. Special characteristics. D 20.TOPTRANS.10 en TOP Transfer Force transfer standard Data Sheet Special characteristics Ultimate precision force transducer for international comparative measurements Tensile/compressive force transducer Nominal forces

More information

TOP Transfer. Data sheet. Force transfer standard. Special features. B en

TOP Transfer. Data sheet. Force transfer standard. Special features. B en TOP Transfer Force transfer standard Data sheet Special features - Force transducer with ultimate precision for international comparison measurements - Tensile/compressive force transducer - Nominal forces

More information

TB2. Data Sheet. Torque reference transducer. Special features. B en

TB2. Data Sheet. Torque reference transducer. Special features. B en T2 Torque reference transducer Data heet pecial features tandard version ptional: rotection I67 - ccuracy class 0.03 - s 100 m, 200 m, 500 m, 1 k m, 2 k m, 3 k m, 5 k m and 10 k m - High permissible oscillation

More information

Z7A. Load cells. Special features. Data sheet. Wiring code

Z7A. Load cells. Special features. Data sheet. Wiring code Z7A Load cells Special features - Complies with OIML R60 regulations up to 3000 d - Max. capacities: 500 kg... 10 t - Fulfills EMC requirements in accordance to EN 45 501 - Low transducer height - Robust

More information

Lexium integrated drives

Lexium integrated drives Presentation GBX planetary gearbox Presentation In many cases the axis controller requires the use of a planetary gearbox for adjustment of speed of rotation and torque; the accuracy required by the application

More information

Linear guide drives. Synchronous shafts The use of synchronous shafts enables several linear axes to be operated with one drive.

Linear guide drives. Synchronous shafts The use of synchronous shafts enables several linear axes to be operated with one drive. Linear guide drives Drive concept The linear guides are driven via the hollow shaft in the drive head. The drive head is used to directly install a motor or alternatively (in connection with a center shaft)

More information

Backlash-free Torque Limiting Clutches

Backlash-free Torque Limiting Clutches ES -Compact Backlash-free Torque Limiting Clutches www..de Instant separation on overload Permanent backlash-free torque transmission Readable torque adjustment Synchronous, ratchetting and overload designs

More information

Backlash-free Safety Couplings. pioneer in innovation

Backlash-free Safety Couplings. pioneer in innovation Backlashfree Safety Couplings pioneer in innovation T h e m o d u l a r s y s t e m s a t i s f i e s a l l y o u r w i s h e s! Edition 8/007 G E R W A H T h e C o m p a n y GERWAH GmbH was founded in

More information

Backlash-free Safety Couplings

Backlash-free Safety Couplings Backlashfree Safety Couplings You Can Rely On Us! T h e m o d u l a r s y s t e m s a t i s f i e s a l l y o u r w i s h e s! Edition /00 G E R W A H T h e C o m p a n y GERWAH GmbH was founded in 19.

More information

Digital AC Motors MHD

Digital AC Motors MHD Digital AC Motors MHD090 8-1 8 MHD090 8.1 Technical Data Description Symbol Unit MHD090B-035 Type of cooling Natural Natural Surface Liquid Motor overtemperature 60 K 100 K 60 K/100 K 60 K/100 K Electric

More information

Identification system for short product names. Changes/amendments at a glance. 2 Bosch Rexroth AG OBB omega modules R ( )

Identification system for short product names. Changes/amendments at a glance. 2 Bosch Rexroth AG OBB omega modules R ( ) Omega Modules OBB 2 OBB omega modules R9990079 (206-05) Identification system for short product names Short product name Example: O B B - 085 - N N - System = Omega module Guideway = Ball Rail System Drive

More information

ZF Maschinenantriebe GmbH Industrial Drives. Planetary gearboxes Economy Series for Servomotors

ZF Maschinenantriebe GmbH Industrial Drives. Planetary gearboxes Economy Series for Servomotors ZF Maschinenantriebe GmbH Industrial rives Planetary gearboxes Economy Series for Servomotors 2 ZF-uoplan 2K Two-speed Gearboxes ZF-Ecolift Elevator Gearboxes ZF-Servoplan G ompact Gearbox ZF-Tiratron

More information

TSCHAN S US Elastische Kupplungen Flexible Couplings TNS Flexible Couplings. Partner for Performance

TSCHAN S US Elastische Kupplungen Flexible Couplings TNS Flexible Couplings. Partner for Performance US 11 2015 TSCHAN S Elastische Kupplungen Flexible Couplings TNS Flexible Couplings Partner for Performance www.ringfeder.com Welcome to your system supplier for every aspect of power transmission Today

More information

INVESTIGATION OF THE CALIBRATION CAPABILITIES OF A 1 KN M AND 10 KN M REFERENCE CALIBRATION MACHINE

INVESTIGATION OF THE CALIBRATION CAPABILITIES OF A 1 KN M AND 10 KN M REFERENCE CALIBRATION MACHINE IMEKO 23 rd TC3, 13 th TC5 and 4 th TC22 International Conference 30 May to 1 June, 2017, Helsinki, Finland INVESTIGATION OF THE CALIBRATION CAPABILITIES OF A 1 KN M AND 10 KN M REFERENCE CALIBRATION MACHINE

More information

Actuators with ball monorail guidance system and ball screw drive MKUVE15-KGT, MKUVE20-KGT

Actuators with ball monorail guidance system and ball screw drive MKUVE15-KGT, MKUVE20-KGT Actuators with ball monorail guidance system and ball screw drive MKUVE15-KGT, MKUVE20-KGT Product overview Actuators with ball monorail guidance system and ball screw drive Actuators with ball monorail

More information

Precision Ball Screw/Spline

Precision Ball Screw/Spline 58-2E Models BNS-A, BNS, NS-A and NS Seal Outer ring Shim plate Seal Spline nut Seal Collar Shim plate Seal End cap Ball Outer ring Ball screw nut Outer ring Ball Retainer Retainer Outer ring Point of

More information

APEX DYNAMICS, INC. Staianless

APEX DYNAMICS, INC. Staianless APEX DYNAMICS, INC. HIGH PRECISION PLANETARY GEARBOXES AE / AER Series Staianless High precision high speed planetary gearboxes AE / AER series Apex Dynamics, Inc. is the world s most productive manufacturer

More information

Stress Analysis Lecture 3 ME 276 Spring Dr./ Ahmed Mohamed Nagib Elmekawy

Stress Analysis Lecture 3 ME 276 Spring Dr./ Ahmed Mohamed Nagib Elmekawy Stress Analysis Lecture 3 ME 276 Spring 2017-2018 Dr./ Ahmed Mohamed Nagib Elmekawy Axial Stress 2 Beam under the action of two tensile forces 3 Beam under the action of two tensile forces 4 Shear Stress

More information

Variable Displacement Plug-In Motor A6VE. Series 6, for open and closed circuits Axial tapered piston, bent axis design

Variable Displacement Plug-In Motor A6VE. Series 6, for open and closed circuits Axial tapered piston, bent axis design rueninghaus Hydromatik Series 6, for open and closed circuits xial tapered piston, bent axis design Size 28...20 Nom. pressure up to 400 bar Peak pressure up to 40 bar RE 9606/0.97 RE 9606/0.97 replaces

More information

Applying the Wheatstone Bridge Circuit

Applying the Wheatstone Bridge Circuit Applying the Wheatstone Bridge Circuit by Karl Hoffmann W1569-1.0 en Applying the Wheatstone Bridge Circuit by Karl Hoffmann Contents: 1 Introduction...1 2 Elementary circuits with strain gages...5 2.1

More information

Lightweight. Geislinger Gesilco

Lightweight. Geislinger Gesilco Lightweight Geislinger Gesilco The Geislinger Gesilco product range is based on more than 20 years of experience in developing fibre composite couplings and shafts. The maintenance-free composite membranes

More information

Parameter Design of High Speed Coupling for 6 MW Wind Turbine Considering Torsional Vibration

Parameter Design of High Speed Coupling for 6 MW Wind Turbine Considering Torsional Vibration Parameter Design of High Speed Coupling for 6 MW Wind Turbine Considering Torsional Vibration JongHun Kang 1, Junwoo Bae 2, Seungkeun Jeong 3, SooKeun Park 4 and Hyoung Woo Lee 1 # 1 Department of Mechatronics

More information

Hilti North America Installation Technical Manual Technical Data MI System Version

Hilti North America Installation Technical Manual Technical Data MI System Version MIC-SA-MAH 174671 Hilti North America Installation Technical Manual Technical Data MI System Version 1. 08.017 Terms of common cooperation / Legal disclaimer The product technical data published in these

More information

Operating Instructions for Digital Manometer. Model: MAN-SD

Operating Instructions for Digital Manometer. Model: MAN-SD Operating Instructions for Digital Manometer Model: MAN-SD 1. Contents 1. Contents...2 2. Note...3 3. Instrument Inspection...3 4. Regulation Use...4 5. Operating Principle...4 6. Mechanical Connection...5

More information

ZF Series Force Transducers

ZF Series Force Transducers Data Sheet Series Force Transducers FEATURES 1 kn to 00 kn High accuracy For tensile or pressure forces Made of stainless steel Enclosure protection IP 67 DESCRIPTION The force transducers of the series

More information

The perfect Torque Limiting Clutch for

The perfect Torque Limiting Clutch for The perfect Torque Limiting Clutch for Machine Tools Packaging Machinery Printing and Paper Machinery Automated Systems Power Transmission compact, backlash-free torque limiting clutch Immediate disengagement

More information

second PLSA line R310EN 3308 ( )

second PLSA line R310EN 3308 ( ) 01_1 Planetary st Headline_36 Screw Assemblies pt/14.4 mm second PLSA line R310EN 3308 (2011-09) 2 Planetary Screw Assemblies PLSA Planetary Screw Assemblies PLSA Product Overview 3 Nuts, Screws, Screw

More information

Increased Requirements for Higher Nominal Forces, Necessities and Possibilities to Measure Them

Increased Requirements for Higher Nominal Forces, Necessities and Possibilities to Measure Them B 3.1 Increased Requirements for Higher Nominal Forces, Necessities and Possibilities to Measure Them Dr. Schäfer, André Hottinger Baldwin Messtechnik GmbH Im Tiefen See 45, 64293 Darmstadt andre.schaefer@hbm.com

More information

ROTARY MOTION CONTROL

ROTARY MOTION CONTROL ROTARY MOTION CONTROL Technical Data Sheet Nexen Mechanical Torque Limiter Family PMT / PMK / PMC 2TC 2CC ECC PCC Mechanical Torque Limiter The trend in industry is to design and incorporate more automation

More information

Our classic for extreme parallel offset: Standard S series. The Schmidt-Kupplung compensates variable parallel Symbiosis of performance, com-

Our classic for extreme parallel offset: Standard S series. The Schmidt-Kupplung compensates variable parallel Symbiosis of performance, com- Schmidt-Kupplung Power Plus SK_PP_/0 The Schmidt-Kupplung series Schmidt-Kupplung Our classic for extreme parallel offset: Standard S series The Schmidt-Kupplung compensates variable parallel Symbiosis

More information

HPG xxx 030 C1 C2 C3. High performance angle gearboxes. Output. Input. Drawings. C with option motor flange. View x. Centering View y.

HPG xxx 030 C1 C2 C3. High performance angle gearboxes. Output. Input. Drawings. C with option motor flange. View x. Centering View y. HPG 030 1 2 3 Input Output 1 View M6 ( deep) 0 Ø4 H (2.2 deep) 18.0 M6 ( deep) 0 2 3 M6 ( deep) 2 13.0 4 2.0 18.0 24.0 M Ø12 k6 6 M6 ( deep) M6 ( deep) 3 Eample HPG 030 2 with option motor flange 0 M6

More information

STRUCTURE DESCRIPTION

STRUCTURE DESCRIPTION Telescopic Lightning Protection Mast Height = 24,85 m above floor Part No. 103 025 Type with flange plate Design acc. DIN 4131 wind zone III (equal to 32,0m/s in EN 1991-1-4) STANDARD USED GENERAL INFORMATION

More information

Benefits/Application. Very high-cycle fatigue resistant up to 80 % of nominal load. Easy assembling, lots of possibilities. Options/Accessories

Benefits/Application. Very high-cycle fatigue resistant up to 80 % of nominal load. Easy assembling, lots of possibilities. Options/Accessories D a t a s h e e t T o r q u e T r a n s d u c e r S e r i e s M ( 2 N m 1 0 0 0 0 N m ) Benefits/Application For static and dynamic moments Non-rotational construction Very high-cycle fatigue resistant

More information

Strain Gauges and Accessories

Strain Gauges and Accessories Strain Gauges and Accessories Nurgül Er nurguel.er@hbm.com www.hbm.com 19.03.2008, Folie 1 Hottinger Baldwin Messtechnik GmbH Nurgül Er How to find the right strain gauge a wide range of of strain gauges

More information

Welcome to where precision is. Large Ball Screws Diameter mm

Welcome to where precision is. Large Ball Screws Diameter mm Welcome to where precision is. Large Ball Screws Diameter mm Large Ball Screws Diameter mm This section includes nuts with standard dimensions per ISO 8 / DIN 1. In most cases, there is a choice of three

More information

APEX DYNAMICS, INC. Staianless

APEX DYNAMICS, INC. Staianless APE DYNAMICS, INC. HIGH PRECISION HIGH SPEED PLANETARY GEARBOES AF / AFR Series Staianless High precision high speed planetary gearboxes AF / AFR series Apex Dynamics, Inc. is the world s most productive

More information

Dynamic Tests on Ring Shear Apparatus

Dynamic Tests on Ring Shear Apparatus , July 1-3, 2015, London, U.K. Dynamic Tests on Ring Shear Apparatus G. Di Massa Member IAENG, S. Pagano, M. Ramondini Abstract Ring shear apparatus are used to determine the ultimate shear strength of

More information

3B SCIENTIFIC PHYSICS

3B SCIENTIFIC PHYSICS 3B SCIENTIFIC PHYSICS Torsion Apparatus 1018550 Torsion Apparatus Supplement Set 1018787 Instruction manual 11/15 TL/UD 1. Description The torsion equipment is designed for determining the torsion coefficient

More information

Benefits/Application. Very high-cycle fatigue resistant up to 100 % of nominal load. Extremely robust against side forces and bending moments

Benefits/Application. Very high-cycle fatigue resistant up to 100 % of nominal load. Extremely robust against side forces and bending moments Data sheet Force transducer Series RF-I (160 kn 4000 kn) Benefits/Application Accuracy class 0,05 For static and dynamic tensile and compressive forces Very high-cycle fatigue resistant up to 100 of nominal

More information

Dimensional drawing face mount flange radial. R = bending radius min. 40 mm. Dimensional drawing face mount flange axial

Dimensional drawing face mount flange radial. R = bending radius min. 40 mm. Dimensional drawing face mount flange axial Incremental Encoder DRS/DRS, face mount flange up to 8,2 Dimensional drawing face mount flange radial Incremental Encoder Connector or cable outlet Protection class up to IP s TTL and HTL Zero-Pulse-Teach

More information

Turbine Meter TRZ 03 PRODUCT INFORMATION. Reliable Measurement of Gas

Turbine Meter TRZ 03 PRODUCT INFORMATION. Reliable Measurement of Gas Turbine Meter TRZ 0 PRODUCT INFORMATION Reliable Measurement of Gas TURBINE METER TRZ 0 Method of operation, Construction Method of operation The TRZ 0 turbine meter is a flow meter suitable for gas measurement

More information

DRS 61: Incremental encoders, number of lines and zero pulse width freely programmable DRS 60: Incremental Encoders with Zero-Pulse-Teach

DRS 61: Incremental encoders, number of lines and zero pulse width freely programmable DRS 60: Incremental Encoders with Zero-Pulse-Teach NEW DRS : Incremental encoders, number of lines and zero pulse width freely programmable DRS : s with Zero-Pulse-Teach Further highlights of this generation of encoders: Simple zero-pulse-teach by pressing

More information

D a t a s h e e t. F o r c e T r a n s d u c e r. S e r i e s K. ( 4 k N k N ) Benefits/Application. Options/Accessories

D a t a s h e e t. F o r c e T r a n s d u c e r. S e r i e s K. ( 4 k N k N ) Benefits/Application. Options/Accessories D a t a s h e e t F o r c e T r a n s d u c e r S e r i e s K ( k N 6 3 0 k N ) Benefits/Application For static and dynamic tensile and compressive forces Hermetically sealed Very small force application

More information

Instruction for use Plunger Probes M FB and M78-Plus

Instruction for use Plunger Probes M FB and M78-Plus Instruction for use Plunger Probes M5678-78FB and M78-Plus Rev 3 (10/2012) DIATEST Plunger Probe M5678-68FB Self-centering interior measuring gauge for bore diameter from 19,5 to 330 mm Design A plunger

More information

Rubber- and cellular buffers

Rubber- and cellular buffers Rubber- and cellular buffers Rubber- and cellular buffers Industrial Brakes Thrusters Pressure Oil Pumps Couplings Hydraulic Buffers Cellular Buffers Rail Pliers Sheaves Hook Blocks Crane Rail Wheels Rail

More information

Cam Roller Guides. The Drive and Control Company. Service Automation. Electric Drives and Controls. Linear Motion and Assembly Technologies

Cam Roller Guides. The Drive and Control Company. Service Automation. Electric Drives and Controls. Linear Motion and Assembly Technologies Industrial Hydraulics Electric Drives and Controls Linear Motion and Assembly Technologies Pneumatics Service Automation Mobile Hydraulics Cam Roller Guides The Drive and Control Company Linear Motion

More information

Product description. Compact Modules. Characteristic features. Further highlights

Product description. Compact Modules. Characteristic features. Further highlights 4 Compact Modules Product description Characteristic features Five fine-tuned sizes based on a compact precision aluminum profile with two integrated pre-tensioned ball rail systems Identical external

More information

Cooler-Bypass Thermostat Valve, Size 10

Cooler-Bypass Thermostat Valve, Size 10 Cooler-Bypass Thermostat Valve, Size Q max = l/min, p max = bar Temperature-controlled, integral relief function Description These direct acting bypass thermostat valves are size, temperature controlled,

More information

US Safety Couplings. Partner for Performance

US Safety Couplings. Partner for Performance US 05 2016 Safety Couplings Partner for Performance www.ringfeder.com Welcome to your system supplier for every aspect of power transmission RINGFEDER POWER TRANSMISSION We say what we mean and mean what

More information

Product Description. Further highlights. Outstanding features. 4 Bosch Rexroth Corporation Miniature Linear Modules R310A 2418 (2009.

Product Description. Further highlights. Outstanding features. 4 Bosch Rexroth Corporation Miniature Linear Modules R310A 2418 (2009. 4 Bosch Rexroth orporation Miniature Linear Modules R310A 2418 (2009.05) Product Description Outstanding features Rexroth Miniature Linear Modules are precise, ready-to-install linear motion systems that

More information

Load cell. Special features. Data sheet

Load cell. Special features. Data sheet Z6 Load cell Special features - Welded on metal bellows - (rated) loads: 5 kg 1 t - Load cells and installation aids made of rust resistant materials - Verifiable up to 6000 divisions, test report as per

More information

Planetary Screw Assemblies PLSA

Planetary Screw Assemblies PLSA Planetary Screw Assemblies PLSA R310EN 3308 (2011-09) The Drive & Control Company C/ Centauro, 13 Área Empresarial Las Cubiertas 28971-Griñón (Madrid) T. 0034 91 126 6627 info@diversiatec.com www.diversiatec.com

More information

Rotary modules.

Rotary modules. Rotary modules www.comoso.com www.comoso.com Rotary modules ROTARY MODULES Series Size Page Rotary modules RM swivel unit 156 RM 08 160 RM 10 162 RM 12 164 RM 15 168 RM 21 172 RM rotor 176 RM 50 180 RM

More information

HRN/HRN-C Series Hydraulic Vane Rotary Actuators

HRN/HRN-C Series Hydraulic Vane Rotary Actuators HRN/ Hydraulic Vane Rotary Actuators Vane Actuators Tork-Mor HRN Contents Features... 2 Ordering Information... Engineering Data / Specifications... Dimensions... Features... 1 Ordering Information...12

More information

Data Sheet. Functional Safety Characteristic Safety Values for BE.. Brakes * _0715*

Data Sheet. Functional Safety Characteristic Safety Values for BE.. Brakes * _0715* Drive Technology \ Drive Automation \ System Integration \ Services *22291814_0715* Data Sheet Functional Safety Characteristic Safety Values for BE.. Brakes Edition 07/2015 22291814/EN SEW-EURODRIVE Driving

More information

THE NEW 1.1 MN m TORQUE STANDARD MACHINE OF THE PTB BRAUNSCHWEIG/GERMANY

THE NEW 1.1 MN m TORQUE STANDARD MACHINE OF THE PTB BRAUNSCHWEIG/GERMANY THE NEW 1.1 MN m TORQUE STANDARD MACHINE OF THE PTB BRAUNSCHWEIG/GERMANY D. Peschel 1, D. Mauersberger 1, D. Schwind 2, U. Kolwinski 2 1 Solid mechanics department, PTB, Germany 2 Gassmann Theiss Messtechnik

More information

Selection table for guided systems (crank driven)

Selection table for guided systems (crank driven) Selection table for guided systems (crank driven) One mass shaker brute-force system One mass shaker natural frequency system Two mass shaker fast-runner system with reaction force-compensation Single

More information

R310EN 2403 ( ) The Drive & Control Company

R310EN 2403 ( ) The Drive & Control Company Feed Modules VKK R310EN 2403 (2008.09) The Drive & Control Company Linear Motion and Assembly Technologies Ball Rail Systems Roller Rail Systems Linear Bushings and Shafts Ball Screw Drives Linear Motion

More information

Lamp and Control Panel (Lamp Panel)

Lamp and Control Panel (Lamp Panel) www.reinhausen.com Lamp and Control Panel (Lamp Panel) Operating Instructions BA 47/0 EN NOTE! Changes may have been made to a product after going to press with this documentation. We expressly reserve

More information

Couplings. highly-flexible ring coupling

Couplings. highly-flexible ring coupling product catalogue Couplings GKN Stromag TRIR highlyflexible ring coupling GKN Stromag TRIR highlyflexible ring coupling Special designs (see page 27) > TEF...F RR To connect a flywheel or equivalent to

More information

DRIVE-TECHNOLOGY INKOMA - GROUP. SDA - Spindle direct drive actuator. Maschinenfabrik ALBERT GmbH Technologiepark 2 A Gampern - Austria

DRIVE-TECHNOLOGY INKOMA - GROUP. SDA - Spindle direct drive actuator. Maschinenfabrik ALBERT GmbH Technologiepark 2 A Gampern - Austria DRIVETECHNOLOGY ALBERTINKOMA GROUP SDA Spindle direct drive actuator Mascinenfabrik ALBERT GmbH Tecnologiepark A Gampern Austria pone: +/(0)0 fax: +/(0)0 email: office@albert.at internet: www.albert.at

More information

Experiment Instructions. Deformation of Frames

Experiment Instructions. Deformation of Frames Experiment Instructions SE 0.20 Deformation of Frames Experiment Instructions This manual must be kept by the unit. Before operating the unit: - Read this manual. - All participants must be instructed

More information

2. Determine the deflection at C of the beam given in fig below. Use principal of virtual work. W L/2 B A L C

2. Determine the deflection at C of the beam given in fig below. Use principal of virtual work. W L/2 B A L C CE-1259, Strength of Materials UNIT I STRESS, STRAIN DEFORMATION OF SOLIDS Part -A 1. Define strain energy density. 2. State Maxwell s reciprocal theorem. 3. Define proof resilience. 4. State Castigliano

More information

ElectroMechanical Cylinder LEMC

ElectroMechanical Cylinder LEMC www.lmotion.ru lmotionmail@ya.ru.: (9)9160 ElectroMechanical Cylinder LEMC THE POWER OF KNOWLEDGE ENGINEERING www.lmotion.ru lmotionmail@ya.ru.: (9)9160 ElectroMechanical Cylinder LEMC enefits High efficiency

More information

FOUR-POINT CONTACT SLEWING RINGS - without gear [ O ]

FOUR-POINT CONTACT SLEWING RINGS - without gear [ O ] FOUR-POINT CONTACT SLEWING RINGS - without gear [ O ] Number of the Loading Boundary Dimensions Static Ax.Basic Load Rating Designation Weight Abutment Dimensions Curve d D T C oa G J 1 J 2 N 1 N 2 n 1

More information

Planetary Screw Assemblies PLSA

Planetary Screw Assemblies PLSA Planetary Screw Assemblies PLSA Ernst-Sachs-Straße 100 97424 Schweinfurt Tel. +49 9721 937-0 Fax +49 9721 937-275 www.boschrexroth.com Catalog "Planetary Screw Assemblies PLSA" R310XX 3308 (2014.01) Dear

More information

VIBRATION ANALYSIS OF TIE-ROD/TIE-BOLT ROTORS USING FEM

VIBRATION ANALYSIS OF TIE-ROD/TIE-BOLT ROTORS USING FEM VIBRATION ANALYSIS OF TIE-ROD/TIE-BOLT ROTORS USING FEM J. E. Jam, F. Meisami Composite Materials and Technology Center Tehran, IRAN jejaam@gmail.com N. G. Nia Iran Polymer & Petrochemical Institute, Tehran,

More information

SLIDE GUIDE SGL TYPE SLIDE GUIDE BLOCK TYPES ACCURACY

SLIDE GUIDE SGL TYPE SLIDE GUIDE BLOCK TYPES ACCURACY SGL YPE he N slide is a linear motion earing utilizing the rotational motion of all elements along four rows of raceway grooves. It can e used in various applications due to its compactness and high load

More information

Data Sheet. Functional Safety Characteristic Safety Values for BE..(FS) Brakes * _0715*

Data Sheet. Functional Safety Characteristic Safety Values for BE..(FS) Brakes * _0715* Drive Technology \ Drive Automation \ System Integration \ Services *22292616_0715* Data Sheet Functional Safety Characteristic Safety Values for BE..(FS) Brakes Edition 07/2015 22292616/EN SEW-EURODRIVE

More information

Figure 1.1 Torsional Pendulum

Figure 1.1 Torsional Pendulum Torsional Pendulum Torsional Pendulum Torsional Pendulum (without masses) (with masses at d1 (with masses at d close to the axis) away from the axis) Figure 1.1 Torsional Pendulum Department of Physical

More information

VD1 CLC. Small Valves DIN-range with a higher k v -value

VD1 CLC. Small Valves DIN-range with a higher k v -value 0 EN - Small Valves DIN-range with a higher k v -value VD CLC Valve body made of brass, mat nickel-plated DN, DN 0 and DN Internally and externally threaded (Rp / R) conforming to ISO 7- Manual knob /

More information

T e c h n i c a l L e x i c o n

T e c h n i c a l L e x i c o n T e c h n i c a l L e x i c o n T e r m s f r o m F o r c e a n d t o r q u e m e a s u r e m e n t t e c h n o l o g y a n d G T M d a t a s h e e t s Technisches Lexikon (eng.) 16/10/14 Introduction

More information

H a r m o n i c P l a n e t a r y

H a r m o n i c P l a n e t a r y H a r m o n i c P l a n e t a r y HPG Series Planetary Gearhead Total Motion Control P r e c i s i o n G e a r i n g & M o t i o n C o n t r o l Harmonic Drive LLC is the world s largest manufacturer of

More information

CTV series CHARACTERISTICS LINEAR UNITS

CTV series CHARACTERISTICS LINEAR UNITS CTV series CHARACTERISTICS The CTV series describes s with a precision ball screw drive and two parallel, integrated, Zerobacklash rail guides. Compact dimensions allow high performance features such as,

More information

Experiment Two (2) Torsional testing of Circular Shafts

Experiment Two (2) Torsional testing of Circular Shafts Experiment Two (2) Torsional testing of Circular Shafts Introduction: Torsion occurs when any shaft is subjected to a torque. This is true whether the shaft is rotating (such as drive shafts on engines,

More information

Research Program Vibrations ENERGIFORSK Vibration Group

Research Program Vibrations ENERGIFORSK Vibration Group Vorlesungen Mechatronik im Wintersemester Research Program Vibrations ENERGIFORSK Vibration Group DIAM A Matrix Tool for Turbine and Generator Vibrations Detection, Investigation, Analysis, Mitigation

More information

AE / AER Series. AER Series

AE / AER Series. AER Series AE / AER Series Characteristic Highlights True helical gear design Precision helical gearing increases tooth to tooth contact ratio by over % vs spur gearing. The helix angle produces smooth and quiet

More information

SGF. The metric thread forming connection

SGF. The metric thread forming connection SGF The metric thread forming connection Schriever SGF Our challenge: An economical solution Alication: Direct connections in cylindrical bores and casted bores. Schriever SGF -screws are metric thread-forming,

More information

Servomotors Order Catalog. LSP-Servomotors with optional planetary gearbox Stall torque 0.18 to 110 Nm

Servomotors Order Catalog. LSP-Servomotors with optional planetary gearbox Stall torque 0.18 to 110 Nm Servomotors Order Catalog LSP-Servomotors with optional planetary gearbox Stall torque 0.8 to 0 Nm Order Catalogue LSP Servomotors ID no.: 08.8B.-0 Date: 0/07 Subject to technical change without notice.

More information

Mechanical vibration Rotor balancing. Part 2: Vocabulary. Vibrations mécaniques Équilibrage des rotors Partie 2: Vocabulaire. First edition

Mechanical vibration Rotor balancing. Part 2: Vocabulary. Vibrations mécaniques Équilibrage des rotors Partie 2: Vocabulaire. First edition Provläsningsexemplar / Preview INTERNATIONAL STANDARD ISO 21940-2 First edition 2017-05 Mechanical vibration Rotor balancing Part 2: Vocabulary Vibrations mécaniques Équilibrage des rotors Partie 2: Vocabulaire

More information

Selection Calculations For Linear & Rotary Actuators

Selection Calculations For Linear & Rotary Actuators H-8 For Electric Linear Slides and Electric Cylinders First determine your series, then select your product. Select the actuator that you will use based on the following flow charts: Selection Procedure

More information

ram reports in applied measurement

ram reports in applied measurement ram reports in applied measurement Introduction In the last decades, strain gage technology has developed into a standard procedure for experimental stress analysis. It is generally the case that three

More information

Check-Q-meter. Table of contents. Features. Functions. RE 27551/ /10 Replaces: Type FD

Check-Q-meter. Table of contents. Features. Functions. RE 27551/ /10 Replaces: Type FD Check-Q-meter RE /0.0 /0 Replaces: 09.9 Type FD Nominal size... Series ax. Operating pressure 0 bar ax. Flow 0 l/min K9/ Table of contents Contents Page Features Functions Ordering details Symbols Functional

More information

Members Subjected to Torsional Loads

Members Subjected to Torsional Loads Members Subjected to Torsional Loads Torsion of circular shafts Definition of Torsion: Consider a shaft rigidly clamped at one end and twisted at the other end by a torque T = F.d applied in a plane perpendicular

More information

Standard Range Nominal Diameter 3-16 mm

Standard Range Nominal Diameter 3-16 mm Standard Range Nominal Diameter - 1 mm 2 steps for ordering properly: Choose screw type A or B for ground or rolled screws: 1412 or 142 Flange 2422 or 2442 End cap with flange 1214 or 124 Cylindrical 1112

More information

POLE WHEELS. Where the shaft is very large a cost-effective alternative is to add a pole band (see following section).

POLE WHEELS. Where the shaft is very large a cost-effective alternative is to add a pole band (see following section). A pole wheel on the target shaft is required when using contactless sensors to generate a signal. Often an existing gear wheel can be used but where none is present a special gear, slotted or holed disk

More information

Single point load cells

Single point load cells SP4M Single point load cells Special features Maximum capacities: kg 200 kg Aluminum High ratio of minimum verification Offcenter load compensation Shielded connection cable Explosion protection and other

More information

STANDARDISED MOUNTINGS

STANDARDISED MOUNTINGS STANDARDISED MOUNTINGS for series 449 cylinders conforming to ISO 21287 standard Series 434 MOUNTINGS CONFORMING TO ISO 21287 - ISO 15552 - AFNOR NF ISO 15552 - DIN ISO 15552 STANDARDS applications Low

More information

ASSOCIATE DEGREE IN ENGINEERING EXAMINATIONS. SEMESTER 2 May 2013

ASSOCIATE DEGREE IN ENGINEERING EXAMINATIONS. SEMESTER 2 May 2013 ASSOCIATE DEGREE IN ENGINEERING EXAMINATIONS SEMESTER 2 May 2013 COURSE NAME: CODE: Mechanical Engineering Science [8 CHARACTER COURSE CODE] GROUP: AD-ENG 1 DATE: TIME: DURATION: "[EXAM DATE]" "[TIME OF

More information

Coromant Capto Short Adapter

Coromant Capto Short Adapter Coromant Capto Short Adapter The quick change system for reduced setup and production time. Faster return on investment. Short Adapter Short Adapter More available cutting tool length Short toolholder

More information

Drive Units with Ball Screw Drives R310EN 3304 ( ) The Drive & Control Company

Drive Units with Ball Screw Drives R310EN 3304 ( ) The Drive & Control Company Drive Units with Ball Screw Drives R310EN 3304 (2007.05) The Drive & Control Company Linear Motion and Assembly Technologies Ball Rail Systems Roller Rail Systems Linear Bushings and Shafts Precision Ball

More information

Modelling of a dynamic torque calibration device and determination of model parameters

Modelling of a dynamic torque calibration device and determination of model parameters ACTA IMEKO June 2014, Volume 3, Number 2, 14 18 www.imeko.org Modelling of a dynamic torque calibration device and determination of model parameters Leonard Klaus, Thomas Bruns, Michael Kobusch Physikalisch-Technische

More information

Compendium Screw Jacks

Compendium Screw Jacks Compendium Screw Jacks Screw Jack Technology Overview of chapters Useful information Project planning Screw jacks Bevel gear boxes Lifting screw protective covers Couplings and connecting shafts Accessories

More information

UNI EN ISO 9001:2008 UNI EN ISO 14001:2004 BS OHSAS 18001:2007 EC DIRECTIVE 2014/34/EU (ATEX) CERTIFIED MANAGEMENT SYSTEM

UNI EN ISO 9001:2008 UNI EN ISO 14001:2004 BS OHSAS 18001:2007 EC DIRECTIVE 2014/34/EU (ATEX) CERTIFIED MANAGEMENT SYSTEM EN ISM-BSM CERTIFIED Technology Made in Italy Since 1955 the Varvel Group has been making speed reducers and variators for light industry applications. Reliable partner in power transmission equipment

More information

Incremental Rotary Encoder G58

Incremental Rotary Encoder G58 Shaft: Type S / L / H Hollow shaft: Type W Mechanical Data Housing diameter: mm Shaft:... 0 mm Hollow shaft:... mm Line counts:... 0.000 signals: S, KI, KS, HTL, TTL, O, Vpp, µapp onnector or output: axial

More information

Front flange FLV. Max. [knm/stroke]

Front flange FLV. Max. [knm/stroke] SDN 45 Safety shock absorbers SDN are a low cost alternative to industrial shock absorbers appropriate to customers requirements. Typical applications: cranes, storage and retrieval unit for highbay warehouse,

More information

Stress Analysis Lecture 4 ME 276 Spring Dr./ Ahmed Mohamed Nagib Elmekawy

Stress Analysis Lecture 4 ME 276 Spring Dr./ Ahmed Mohamed Nagib Elmekawy Stress Analysis Lecture 4 ME 76 Spring 017-018 Dr./ Ahmed Mohamed Nagib Elmekawy Shear and Moment Diagrams Beam Sign Convention The positive directions are as follows: The internal shear force causes a

More information

VK2 volume flow controller Overview

VK2 volume flow controller Overview New option with sound attenuator Maintenance-free VK2 volume flow controller that operates without an auxiliary power supply, for ventilation and air conditioning systems. Adjustable on site. Outstanding

More information

Sensor Accessories. Rotary Motion Accessory Pack. Pendulum Rod with two masses, Angular Momentum disc set and Linear Rack with mini c-clamp

Sensor Accessories. Rotary Motion Accessory Pack. Pendulum Rod with two masses, Angular Momentum disc set and Linear Rack with mini c-clamp Sensor Accessories Rotary Motion Accessory Pack (Product No 3288) Pendulum Rod with two masses, Angular Momentum disc set and Linear Rack with mini c-clamp DATA HARVEST Data Harvest Group Ltd 1 Eden Court,

More information