Terms are net 10 days. Catalog prices are subject to change without notice.

Transcription

1

2 Terms and Conditions ORDER imum order is $50.00 CREDIT REQUIREMENTS All orders are subject to approval by our Credit Department. If you are a new account, please furnish us with your tax exempt status, a bank reference, three current supplier references and/or your current D&B rating with your first order. A credit limit will be imposed on new accounts until credit has been established. PAYMENT TERMS Terms are net 10 days. Catalog prices are subject to change without notice. FREIGHT Orders are shipped F.O.B. from our manufacturing facility.(international Shipments are Incoterms: Ex Works). ORDER CANCELLATION material. In the event an order is cancelled, an additional charge will be assessed to cover the cost of labor and RETURNED MATERIAL A handling/restocking fee will be applied to all standard products returned for credit. A return authorization number and shipping instructions must be obtained in advance before an item can be returned. CLAIMS All claims or product shortages must be made within 30 days of the invoice date. HOW TO USE THE CATALOG Find the style code. 1 Style Code ISP ISP ISP ISP ISP ISP ISP HEAD THK (T) Code.125B.125B.188V.188V.188V.188V.188V Choose the head thickness. 2 Length Code (XXX) SHANK (D) Code Find the shank dia. box for the punch you are ordering. 3 OVERALL LENGTH (L) Choose the overall length from shaded gray area. 4 Choose point length POINT LHT. (B) Code.5 =2.5 =2 1 =4 1.5 =6 ABSOLUTE MIN. P/W Indicate the size of the punch tip within this range. (*Absolute. P/W additional charge) 6 MIN. P/W MAX. P/A BLANKS Price (1-19) PCS. ROUNDS SHAPES PILOTS 7 Choose tip tolerance. 8 Choose key type. Optional Tip Tolerance (P) #1 ROUNDS #1 SHAPES #2 ROUNDS & SHAPES Point to Concentric within.0005 T.I.R. Round Point to Concentric within.001 T.I.R. Shape Point to Concentric within.0003 T.I.R. Round/Shape Tolerance #1 unless specified 9 Indicate type of material if other than M2. 2

3 Table of Contents Charpy C-Notch Impact Strength Ft-Lbs Setting the Standard Wilson Tool was the first to provide M2 as its standard tool steel. Many tool manufacturers offer lesser A2 as their standard tool steel and M2 as an upgrade. M2 measures favorably to A2 in wear resistance and has good toughness and compression strength. Alternate Tool Steels can improve productivity and costeffectiveness. Wilson Tool offers stampers three powder metallurgy tool steel upgrades: M4, 3V, 10V and Ultima M4. Each is designed to perform in different situations. TOOL STEELS: Ultima M4: Wilson Tool s patented Ultima M4 tool steel is specially formulated to increase performance and wear resistance, making it ideal for some of the industry s demanding applications. Ultima M4 comes standard on all Xtreme punches and is an available option on all Impax products. M4: Hardened and triple tempered to HRC: Ideal for applications in which both increased toughness and wear resistance are important. 10V: Hardened and double tempered to HRC: Stampers currently using M2 but in need of additional wear resistance may find success with 10V. 3V: Hardened and triple tempered to HRC: Rates comparably to a traditional S7 tool steel in toughness, yet offers better wear resistance and is well suited for punching.187 and thicker steels S7 WEAR RESISTANCE AND TOUGHNESS A2 D2 Wear M2 Toughness CPM 3V CPM M4 CPM 10V Ultima M Wear Resistance Relative Performance TABLE OF CONTENTS Terms and Conditions...2 Order Information...2 Inch Solid Punches Inch Ejector Punches P1 and P2 Pilots Stubby Pilots Extended Range Punches Xtreme Punches Tap Back Punches Headed Straight Punches...18 Headed Close Space Punches...19 Round Form Punches...20 Close Space Guides...21 Guide Bushings Threadforms...24 Slug Hugger 2 and 4L...25 Clearances...25 Counterbore Relief Dies Taper Relief Dies Round Form Dies...30 Headed Retainers...31 Special Shapes Alteration Information Keying Information...40 Ejector Components...41 Tonnage Calculation...42 Coatings Hardness HRC 3

4 INCH SOLID PUNCHES ALTERNATE MATERIALS 10V, M4, 3V, ULTIMA M4 OPTIONAL TIP TOLERANCE [P] #1 ROUNDS Point to Concentric within.0005 T.I.R. Round #1 SHAPES Point to Concentric within.001 T.I.R. Round NOTE: ORDER STD-SHAPE STD-ROUND 1. Tolerance #1 unless specified 'B' 'B' 'P' Dim 'P' Dim 'W' Dim #2 ROUNDS & SHAPES Point to Concentric within.0003 T.I.R. Round & Shape 1/8 3/16 NOTES SHAPES - Die View KEYS 0005/inch 0005/inch Within Within Within Within /inch 0005/inch Standard "M" dimension for key 9 and 10 is:.5 Dia Key 1-4 included in all standard shapes price Alterations to keying, see page 40 Standard key angle Y = 0 Order die view Note:.005 Rad. corners typical on shapes BL = Blank For special shapes, see pages ALTERATIONS ABR Blend radius other than.500 [Round only] ABRD Point length longer than standard lengths [Round only] ABSH Point length longer than standard lengths [Shape only] AD Reduce body diameter AE Ejector size different than standard for punch AH Reduce head diameter AHR Altered radius under head AL Overall length shorter [Shorten shank maintain point] AT Reduce head thickness EBT Extra back taper MK Multiple keys NS No side hole - Ejector PL Precision overall length PT Precision head thickness 4

5 INCH SOLID PUNCHES Style Code Head THK [T] [D] Overall Length [L] Point Length (B) Absolute P/W P/W Max P/A.125=B or = x x x x x x x x x x x x.50=2 SOLID ISP.125=B or.125=b or.125=b or.250=b or 250=B or 250=B or 250=B or x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x 1.50= x x x x x x x x x x x x.50=2 x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x 1.50= x x x x x x x x x x x x x x x x.50=2 x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x 1.50= x x x x x x x x x x x x x x x x.50=2 x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x 1.50= x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x 1.50= x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x 1.50= x x x x x x x x x x x x x x x x x x x x x x x x x x x x x.18.2 x x x x x x x x x x x x x x x x x x x x x x x x x 1.50= x x x x x x x x x x x x x x x x x x x x x x x x x x x x x.18.2 x x x x x x x x x x x x x x x x x x x x x x x x x 1.50= x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x 1.50= Overall Length [L] Code Shaded boxes indicate stock available. NOTE: For larger D, see page 12 Extended Range. x Ultima M4 available

6 INCH EJECTOR PUNCHES ALTERNATE MATERIALS 10V, M4, 3V, ULTIMA M4 OPTIONAL TIP TOLERANCE [P] #1 ROUNDS Point to Concentric within.0005 T.I.R. Round #1 SHAPES NOTE: 1. Tolerance #1 unless specified Point to Concentric within.001 T.I.R. Round #2 ROUNDS & SHAPES Point to Concentric within.0003 T.I.R. Round & Shape SHAPES - Die View KEYS ORDER STD-SHAPE STD-ROUND 0005/inch 0005/inch "B" "B" "P" Dim "P" Dim Within Within /8 3/16 Within Within /inch EASY SHARP TOOL SIZE CAT. NO. FITS PIN NO , 6, 9, , 3 Set /inch NOTES Standard "M" dimension for key 9 and 10 is:.5 Dia Key 1-4 included in all standard shapes price Alterations to keying, see page 40 Standard key angle Y = 0 Order die view * Note:.005 Rad. corners typical on shapes BL = Blank For special shapes, see pages ALTERATIONS ABR Blend radius other than.500 [Round only] ABRD Point length longer than standard lengths [Round only] ABSH Point length longer than standard lengths [Shape only] AD Reduce body diameter AE Ejector size different than standard for punch AH Reduce head diameter AHR Altered radius under head AL Overall length shorter [Shorten shank maintain point] AT Reduce head thickness EBT Extra back taper MK Multiple keys NS No side hole - Ejector PL Precision overall length PT Precision head thickness 6

7 INCH EJECTOR PUNCHES Style Code Head THK [T] [D] Overall Length [L] Point Lenth (B) Absolute P/W P/W Max P/A Ejector.125=B or x x x x x x x x.50= x x x x x x x x x x x x x (.02).125=B or x x x x x x x x.50=2 x x x x x x x x x x x x x x x x x x (.032) x x x x x x x x x x x x.50=2.125=b or x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x (.046) x x x x x x x x 1.50=6 x x x x x x x x x x x x.50= x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x (.063) EJECTOR IEP x x x x x x x x 1.50=6 x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x 1.50= (.063) x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x 1.50= (.063) 250=B or x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x 1.50= (.094) 250=B or x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x 1.50= (.094) 250=B or x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x 1.50= (.094) Overall Length [L] Code Shaded boxes indicate stock available. NOTE: For larger D, see page 12 Extended Range. x Ultima M4 available 7

8 P1 AND P2 PILOTS P1 P2 T D Working L Length D T D Working L Length D R.5 R.5 OPTIONAL TIP TOLERANCE [P] #1 ROUNDS Point to Concentric within.0005 T.I.R. Round #1 SHAPES Point to Concentric within.001 T.I.R. Round #2 ROUNDS & SHAPES Point to Concentric within.0003 T.I.R. Round & Shape ORDER P1 & P2 Working Length 'B' 'P' Dim ALTERATIONS ABR Blend radius other than.500 [Round only] ABRD Point length longer than standard lengths [Round only] ABSH Point length longer than standard lengths [Shape only] AD Reduce body diameter AH Reduce head diameter AHR Altered radius under head AL Overall length shorter [Shorten shank maintain point] AT Reduce head thickness EBT Extra back taper MK Multiple keys PT Precision head thickness 8

9 P1 AND P2 PILOT PILOT Style Code ISP Head THK [T].125=B or.125=b or.125=b or.125=b or.250=b or 250=B or 250=B or 250=B or [D] Working Length [L] Code Working Length [L] Point Lenth [B] Absolute P/W.50= x x x x x x x x x x.50=2 x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x 1.50= x x x x x x x x x x.50=2 x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x 1.50= x x x x x x x x x x x x x x.50=2 x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x 1.50= x x x x x x x x x x x x x x.50=2 x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x 1.50= x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x 1.50= x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x 1.50= x x x x x x x x x x x x x x x x x x x x x x x x x.18.2 x x x x x x x x x x x x x x x x x x x x x 1.50= x x x x x x x x x x x x x x x x x x x x x x x x x.18.2 x x x x x x x x x x x x x x x x x x x x x 1.50= x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x 1.50= P/W Max P/A Shaded boxes indicate stock available. x Ultima M4 available 9

10 STUBBY PILOTS ISS ISP "T" +.01 ISS Straight Working"L" Length +.02 D = P D INCLUDED R.015±.005 "Z" R.5 D "T" ISP Point Working"L" Length +.02 "D" INCLUDED R.015±.005 SBR "Z" +.03 R.5 R.125 P OPTIONAL TIP TOLERANCE [P] #1 ROUNDS Point to Concentric within.0005 T.I.R. Round #1 SHAPES Point to Concentric within.001 T.I.R. Round ORDER POINT STRAIGHT "D" ISS V "D" Working Length ISP B "P" Dim RD D=.3430 P3 "P" Dim RD P=.500 P3 #2 ROUNDS & SHAPES Point to Concentric within.0003 T.I.R. Round & Shape Working Length ALTERATIONS ABR Blend radius other than.500 [Round only] ABRD Point length longer than standard lengths [Round only] ABSH Point length longer than standard lengths [Shape only] AD Reduce body diameter AH Reduce head diameter AHR Altered radius under head AL Overall length shorter [Shorten shank maintain point] AT Reduce head thickness EBT Extra back taper MK Multiple keys PT Precision head thickness 10

11 STUBBY PILOTS Style Code Head Thk (T) (D) WorkingLength (Z). P Max P.125=B or =B or STRAIGHT ISS Straight or.250=b or.250=b or.250=b or.250=b or.250=b Style Code Head Thk (T) (D) Working Length SBR Max. Z *. P Max P.125=B or =B or POINT ISP Point or.250=b or.250=b or.250=b or.250=b or.250=b * Z = [(P-.057).728] Shaded boxes indicate stock available. 11

12 EXTENDED RANGE SOLID, EJECTOR PUNCHES IEP ISP OPTIONAL TIP TOLERANCE [P] #1 ROUNDS Point to Concentric within.0005 T.I.R. Round #1 SHAPES Point to Concentric within.001 T.I.R. Round NOTE: ORDER STD-SHAPE STD-ROUND 1. Tolerance #1 unless specified "B" "B" "P" Dim "P" Dim "W" Dim #2 ROUNDS & SHAPES Point to Concentric within.0003 T.I.R. Round & Shape 1/8 3/16 NOTES SHAPES - Die View KEYS 0005/inch 0005/inch Within Within Within Within /inch 0005/inch Standard "M" dimension for key 9 and 10 is:.5 Dia Key 1-4 included in all standard shapes price Alterations to keying, see page 40 Standard key angle Y = 0 Order die view * Note:.005 Rad. corners typical on shapes BL = Blank For special shapes, see pages ALTERATIONS ABR Blend radius other than.500 [Round only] ABRD Point length longer than standard lengths [Round only] ABSH Point length longer than standard lengths [Shape only] AD Reduce body diameter AE Ejector size-different than standard for punch AH Reduce head diameter AHR Altered radius under head AL Overall length shorter [Shorten shank maintain point] AT Reduce head thickness EBT Extra back taper MK Multiple keys PT Precision head thickness No side hole is standard on ejector punches 12

13 EXTENDED RANGE SOLID, EJECTOR PUNCHES Style Code Head THK [T] [D] Overall Length (L) Point Lenth (B) Absolute P/W P W Max P/A or.250=b = or.250=b = SOLID ISP or.250=b or.250=b =6 1.50= or.250=b = or.250=b = Overall Length [L] Code Style Code Head THK [T] [D] Overall Length (L) Point Lenth (B) Absolute P/W P W Max P/A Ejector or.250=b = (.125) or.250=b = (.125) EJECTOR IEP or.250=b or.250=b =6 1.50= (.125) 12 (.125) or.250=b = (.125) or.250=b = (.125) Overall Length [L] Code Shaded boxes indicate stock available. 13

14 XTREME PUNCHES NOTE: Tolerance #1 unless specified ORDER STD-SHAPE STD-ROUND SBR SBR 'P' Dim 'P' Dim Ultima M4 Tool Steel Standard Material D "T".3125 ±.0005 PUNCH HEAD DRAWN TO RC 'W' Dim 10 "L" "D" R.05 ±.005 R.5 PRESS-IN LEAD "SBR" +.06 "P" OPTIONAL TIP TOLERANCE [P] #1 ROUNDS Point to Concentric within.0005 T.I.R. Round #1 SHAPES Point to Concentric within.001 T.I.R. Round #2 ROUNDS & SHAPES Point to Concentric within.0003 T.I.R. Round & Shape NOTES SHAPES- die view KEYS Radial Location 0005/inch Radial Location 0005/inch Radial Location 0005/inch Radial Location 0005/inch Standard "M" dimension for key 9 and 10 is:.5 Dia Key 1-4 included in all standard shapes price Alterations to keying, see page 40 Standard key angle Y = 0 Order die view * Note:.005 Rad. corners typical on shapes BL = Blank For special shapes, see pages ALTERATIONS ABR Blend radius other than.500 [Round only] ABRD Point length longer than standard lengths [Round only] ABSH Point length longer than standard lengths [Shape only] AD Reduce body diameter AL Overall length shorter [Shorten shank maintain point] EBT Extra back taper MK Multiple keys PL Precision overall length

15 XTREME PUNCHES SOLID Style Code ISPX Head THK [T] X=.3125 [D] Overall Length [L] Overall Length [L] Code SBR.50=2 P/W Max P/A = = = = EJECTOR Style Code IEPX Head THK [T] X=.3125 [D] Overall Length [L] Overall Length [L] Code SBR P/W Max P/A Ejector.50= = = = = Shaded boxes indicate stock available. 15

16 TAP BACK PUNCHES ORDER ISPT IEPT "TD" "TT" "TD" "TT" "L" "L" Code R.500 R.500 "B" "B" ISPT BL Code Overall Length IEPT RD P=.687 Overall Length Shape Point Length Shape "P" "P" 'P' Dim "D" "D" OPTIONAL TIP TOLERANCE [P] #1 ROUNDS Point to Concentric within.0005 T.I.R. Round #1 SHAPES Point to Concentric within.001 T.I.R. Round #2 ROUNDS & SHAPES Point to Concentric within.0003 T.I.R. Round & Shape NOTES Standard "M" dimension for key 9 and 10 is:.5 Dia Key 1-4 included in all standard shapes price Alterations to keying, see page 40 Standard key angle Y = 0 ALTERATIONS ABR Blend radius other than.500 [Round only] ABRD Point length longer than standard lengths [Round only] ABSH Point length longer than standard lengths [Shape only] AD Reduce body diameter AL Overall length shorter [Shorten shank maintain point] EBT Extra back taper MK Multiple keys PL Precision overall length (Dowel Pin 1/8 ) Key-3 (Dowel Pin 3/16 ) Key-4 (Single Flat) (Full body) Key-9 (Double Flat) (Full body) Key-10 (Single Flat) (Non Working End) Key-11 (Double Flat) (Non Working End) Key-12 M =.5D M M M M SHAPES- die view KEYS within 0º 4 within 0º 2 within 0º 4 within 0º inch.005 inch.001 inch.005 inch.001 inch.005 inch Key-11 "X".001 inch.005 inch Key-12 "X" (2X) NOTES Order die view *.005 Rad. corners typical on shapes BL = Blank For special shapes see pages

17 TAP BACK PUNCHES Style Code Thread Type [TT] Thread Depth [TD] [D] Overall Length [L] Point Lenth (B) Absolute P/W P/W Max P/A SOLID ISPT / / / / = = = = = = = = = = Overall Length [L] Code Style Code Thread Type [TT] Thread Depth [TD] [D] Overall Length [L] Point Lenth (B) Absolute P/W P/W Max P/A Ejector EJECTOR IEPT / / / / Overall Length [L] Code =2.50=2 1.50=6.50=2 1.50=6 1.50=6 1.50=6 1.50=6 1.50= (.032) 4 (.046) 6 (.063) 6 (.063) 6 (.063) 9 (.094) 9 (.094) Shaded boxes indicate stock available. 17

18 HEADED STRAIGHT PUNCHES ISS ALTERNATE MATERIALS 10V, M4, 3V, ULTIMA M4 IES NOTE: 1. Tolerance #1 unless specified ORDER "D" Dim SOLID Style Code ISS Head THK [T] [D] Overall Length [L] (D) Max (D) Head Dia. (H).125=B or =B or =B or =B or =B or Overall Length [L] Code ORDER "D" Dim "D" Dim EJECTOR Style Code IES Head THK [T] [D] Overall Length [L] = = = =B or Overall Length [L] Code Point Length (B) Ejector (D) Max (D) Head Dia. (H) 60 Head available larger than.2500 If D is greater than.2500, T=.156 Shaded boxes indicate stock available. ALTERATIONS AL Overall length shorter (Shorten shank maintain point) AH Reduce head diameter AHR Altered radius under head AT Reduce head thickness PL Precision overall length ±.001" PT Precision head thickness ±

19 HEADED CLOSE SPACE PUNCHES ALTERNATE MATERIALS 10V, M4, 3V, ULTIMA M AB STYLE IQSS IQPS IQBB IQPB NOTE: 1. Tolerance #1 unless specified "D" ORDER "D" BL 225 P.189 BLANKS & ROUNDS ORDER STRAIGHTS Style Code Overall Length (L) 60º HEAD SQ HEAD [D] IQBB Blanks IQPB Rounds IQBS Blanks IQPS Rounds Overall Length [L] Code "D" "D" Style Code Overall Length (L) 60º HEAD SQ HEAD [D] IQSB IQSS.0625 "D" Overall Length [L] Code MIN. (D) Head Dia 60º (H) Head Dia SQ (H) Point Length (B) 1.8D D D D D D D MAX. (D) Head Dia 60º (H) Head Dia SQ (H) D D D D D D D Head available larger than.2500 If D is greater than.2500, T=.156 Shaded boxes indicate stock available. ALTERATIONS AL Overall length shorter (Shorten shank maintain point) AH Reduce head diameter AHR Altered radius under head AT Reduce head thickness PL Precision overall length ±.001" PT Precision head thickness ±

20 ROUND FORM PUNCHES T D D R WITHOUT "FL" L R.5 B PT ±.0005 D WITH "FL (ALL ROUND FORM WITH "FL" ARE PT & PL) D R PL ±.001 FL ±.001 R.5 B OPTIONAL TIP TOLERANCE [P] Tolerance #1 Concetricity within.0005 T.I.R. Round Tolerance #2 Concetricity within.0003 T.I.R. Round R01 PIERCE & COUNTER SINK A DIM 4 DIM 1 R DIM 8 R DIM 5 R DIM 6 DIM 2 DIM 7 (FL) B DIM 3 T.S. "FL" R02 PIERCE & EXTRUDE DIM 1 R DIM 4 R DIM 5 R DIM 6 DIM 2 DIM 7 (FL) B DIM 3 R03 TRIPLE STEPPED PIERCE DIM 1 R DIM 11 R DIM 6 R DIM 7 R DIM 8 R DIM 9 DIM 2 DIM 3 DIM 10 (FL) DIM 4 B DIM 5 Optional Length & Head Thickness Tolerance PL PT R04 STEPPED PIERCE & COUNTER SINK DIM 9 (FL) R05 DOUBLE STEPPED PIERCE DIM 5 (FL) R06 CONE A DIM 8 DIM 1 DIM 4 B R DIM 10 R DIM 6 R DIM 11 DIM 5 T.S. R DIM 7 R DIM 12 "FL" DIM 2 DIM 3 DIM 1 R DIM 4 DIM 2 A DIM 2 DIM 1 R DIM 3 R DIM 4 B R07 BULLET R08 FULL RADIUS R09 COIN DIM 1 R DIM 2 R10 STEPPED COIN A DIM 4 DIM 1 R DIM 6 R DIM 7 R DIM 8 B DIM 5 (FL) B DIM 3 T.S. DIM 2 T.S. DIM 1 R DIM 2 R11 SPHERICAL DIM 1 R DIM 4 R DIM 3 B B DIM 2 T.S. A DIM 2 DIM 1 R DIM 5 R DIM 4 R12 EXTRUSION DIM 1 R DIM 2 B B DIM 3 T.S. ORDER Take standard catalog part number plus round form part number. Example: ISPV RO5 DIM. 1 DIM. 2 DIM. 3 DIM. 4 DIM. 5 R13 DIMPLE DIM 1 R DIM 5 R DIM 6 R DIM 3 DIM 4 (FL) B DIM 2 R14 PICK-UP PIERCE A DIM 4 DIM 1 R DIM 6 R DIM 7 R DIM 3 DIM 5 (FL) B DIM 2 R15 STEPPED PIERCE & COUNTER SINK A DIM 5 DIM 1 R DIM 6 R DIM 7 R DIM 8 R DIM 9 DIM 2 DIM 10 (FL) DIM 3 DIM 4 T.S. B NOTE: All internal corners will have an internal radius of.010 minimum. 20

21 CLOSE SPACE GUIDES P NOTE: 1. Tolerance #1 unless specified 2. Standard Material M2 Rc CLOSE SPACE GUIDES ORDER Style Code ICSG [D] Overall Length (L) Overall Length [L] Code Hole (P) Head Dia. (D) Die Land (B) Shaded boxes indicate stock available Wilson Tool International 21

22 GUIDE BUSHINGS IHDG ALTERNATE MATERIALS 10V, M4, 3V, ULTIMA M4 IHUG IHLG P P P NOTE: 1. Tolerance #1 unless specified SHAPES-Die View KEYS ORDER.0005/inch Flat runs length of shank.0005/inch.0005/inch Flat runs length of shank Within Within /inch Within Within /inch /inch /inch Standard "M" dimension for key 9 and 10 is:.5 Dia Key 1-4 included in all standard shapes price Standard M and alterations to keying, see page 40 Order die view * Note:.007 Rad. corners typical on shapes For special shapes, see pages BL = Blank ALTERATIONS AH Reduce head diamter AHR Altered radius under head AL Overall length shorter ARD Relief diameter larger than standard size AT Reduce head thickness PL Precision overall length PT Precision head thickness 22

23 GUIDE BUSHINGS HEAD UP HEADLESS HEAD DOWN Style Code IHUG [D] Overall Length (L) Overall Length [L] Code Style Code IHLG [D] Overall Length (L) Overall Length [L] Code Style Code IHDG [D] Overall Length (L) Overall Length [L] Code Absolute P/W P W Max P/A Relief Dia. (R) Die Land (B) P P P P P P P P+.082 Absolute P/W P W Max P/A Relief Dia. (R) Die Land (B) P P P P P P P P+.082 Absolute P/W P W Max P/A Relief Dia. (R) Die Land (B) P P P P P P P P+.082 Shaded boxes indicate stock available. 23

24 THREADFORMS KEY TYPE = KEY LOCATION = M DIM. = LENGTH HEAD DIA HEAD THK. PUNCH BODY DIA LENGTH HEAD THK. DIE BODY DIA. 0 HEAD DIA. 0 Be prepared to provide the following information: Material Type & Thickness Thread Size Punch & Die Requirements per above drawing Thread Size Metric Equivalent. Punch Dia for given thread form 1/ X 1.8 MM / / / x 2.1MM / / X 1.5MM X 1.3MM X 1.4MM X 1.6MM X 0.8MM X 1.8MM

25 SLUG HUGGER 2 SLUG HUGGER 4L SLUG HUGGER The Slug Hugger 2 die grabs the slug just below the cutting surface of the die and retains the slug during the stripping process. Precision nips extend the entire height of the die, helping to guide the slugs through the relief. The nips hold the slugs in the die and drag them through the relief when the next hit takes place. This allows for less galling and slug packing when stamping materials such as aluminum and galvanized steel. DIE TOP SLUG HUGGER The Slug Hugger 4L retains slugs with the assistance of cavities that have been carved on the inside of the die. These cavities create a vacuum seal that holds the slug in place after the hit occurs. While the 4L can be used with any material thickness, it is ideal for stamping thinner materials and is recommended for clearances of less than.059, [1.5mm]. ORDERING SLUG HUGGER DIES Use the clearance you want and the die type you like. The min. P/W dimension for the Slug Hugger 4L is [1.27mm]. The min. clearance for Slug Hugger 4L shape is [.025mm], a round is [.012mm] The min. P/W dimension for the Slug Hugger 2 is [.89mm].. clearance for a Slug Hugger 2 shape or round is [.10mm]. Ordering the Slug Hugger option will not affect the lead-time of your order. Simply specify that you d like Slug Hugger 2 or 4L when you place your tooling order. Indicate the type and thickness of material you are stamping as well as your desired clearance. See the example below: QTY Cat. No. Shape P W Tolerance 2 1 IDDT Headless Taper Relief Die Round IHDT Headed Taper Relief Die Shape RD OB Slug Hugger Type Slug Hugger 2 Slug Hugger 4L Material Type Material Thickness Die Clearance Specify Per Side or Total Cold Rolled Total Cold Rolled Per Side Example:.250" (6.3 mm) Mild Steel - 20% or.050" (1.27 mm). Note: For material greater than.135" (3.4 mm) the Maximum column should be used. CLEARANCES % TOTAL CLEARANCE Material imum Maximum Copper, 1/2 Hard Brass, 1/2 Hard Aluminum, Soft Mild Steel High Carbon Steel Stainless Steel % x Material Thickness = Total Clearance 25

26 COUNTERBORE RELIEF DIES IHDC ALTERNATE MATERIALS 10V, M4, 3V, ULTIMA M IDDC NOTE: 1. Tolerance #1 unless specified) SHAPES-Die View KEYS ORDER.0005/inch Flat runs length of shank.0005/inch.0005/inch Flat runs length of shank "P" Dim Within Within /inch Within Within /inch /inch /inch Standard "M" dimension for key 9 and 10 is:.5 Dia Key 1-4 included in all standard shapes price Standard M and alterations to keying, see page 40 Order die view * Note:.007 Rad. corners typical on shapes For special shapes, see pages BL = Blank ALTERATIONS AD ADL AH AL AHR Reduce body diameter Altered die land (smaller) Reduce head diamter Overall length shorter (shorten shank, maintain point) Altered radius under head ARD Relief diameter larger than standard size AT Reduce head thickness PL Precision overall length PT Precision head thickness SH2 Slug Hugger 2 26

27 COUNTERBORE RELIEF DIES HEADLESS Style Code IDDC [D] Overall Length (L) Overall Length [L] Code Absolute P/W P W Max P/A Relief Dia. (R) Die Land (B) HEADED Style Code IHDC [D] Overall Length (L) Overall Length [L] Code Absolute P/W P W Max P/A Relief Dia. (R) Die Land (B) Shaded boxes indicate stock available. 27

28 TAPER RELIEF DIES IHDT ALTERNATE MATERIALS 10V, M4, 3V, ULTIMA M IDDT NOTE: 1. Tolerance #1 unless specified ORDER "P" Dim SHAPES-Die View KEYS.0005/inch Flat runs length of shank.0005/inch.0005/inch Flat runs length of shank Within Within /inch Within Within /inch /inch /inch Standard "M" dimension for key 9 and 10 is:.5 Dia Key 1-4 included in all standard shapes price Standard M and alterations to keying, see page 40 Order die view * Note:.007 Rad. corners typical on shapes For special shapes, see pages BL = Blank ALTERATIONS AD ADL AH AL AHR Reduce body diameter Altered die land (smaller) Reduce head diamter Overall length shorter (shorten shank, maintain point) Altered radius under head ART Relief taper other than standard AT Reduce head thickness PL Precision overall length PT Precision head thickness SH2 Slug Hugger 2 28

29 TAPER RELIEF DIES HEADLESS Style Code IDDT Headless [D] Overall Length (L) Overall Length [L] Code Absolute P/W P W Max P/A * Standard Die Land (B) =.125 Optional Die Land Available HEADED Style Code IHDT Headed [D] Overall Length (L) Overall Length [L] Code Absolute P/W P W Max P/A Shaded boxes indicate stock available. 29

30 ROUND FORM DIES FD01 DIM 1 R DIM 2 FD02 DIM 1 DIM 2 R DIM 4 R DIM 5 ALSO AVAILABLE WITH TAPER OR COUNTER BORE RELIEF "PL" ±.001 "PL" ±.001 FD03 DIM 1 R DIM 2 FD04 DIM 1 R DIM 2 R DIM 3 A DIM 3 "PT" ±.0005 OFFER 8Ra, 6Ra & 4Ra POLISH FD05 DIM 1 R DIM 2 R DIM 5 R DIM 6 DIM 3 FD06 "R DIM2" 8Ra POLISH STANDARD ALSO OFFER 6Ra & 4Ra POLISH DIM 1 DIM 2 (T.S.) A DIM 3 R DIM 4 R DIM 5 FD07 "R DIM2" 8Ra POLISH STANDARD ALSO OFFER 6Ra & 4Ra POLISH DIM 1 DIM 2 (T.S.) A DIM 3 R DIM 4 R DIM 5 R DIM 8 R DIM 9 A DIM 4 "R DIM2" 8Ra POLISH STANDARD ALSO OFFER 6Ra & 4Ra POLISH FD08 A DIM 3 DIM 1 DIM 2 (T.S.) R DIM 4 R DIM 5 R DIM 6 DIM 6 A DIM 7 ORDER Take standard catalog part number plus round tip part number. Example: MHDT08-28 FD03 DIM. 1 DIM. 2 OPTIONAL TIP TOLERANCE [P] #1 ROUNDS Hole to Body Concentric within.013 T.I.R. Round #1 SHAPES Hole to Body Concentric within.026 T.I.R. Round #2 ROUNDS & SHAPES Hole to Body Concentric within.008 T.I.R. Round & Shape 30

31 HEADED RETAINERS "R" "H" "D" 2X SLIP FIT FOR.3125 DOWEL (.250 DOWEL FOR IHDR037) "X" ±.0004 IHDR Round Tips Only "Y" ±.0004 "K" ± "U" ±.0004 "A" 2X COUNTER BORED AND TAPPED FOR TOP OR BOTTOM MOUNTING. 2X "S" "G" ±.005 "G" ±.005 "B" ROUND CAT. NO. D H A B G K R S U X Y Screw Size Tapped Hole IHDR / /8-16 IHDR / /8-16 IHDR / /8-16 IHDR / /8-16 IHDR /2-13 5/8-11 IHDR /2-13 5/ X SLIP FIT FOR.3125 DOWEL (.250 DOWEL FOR IHDS037) "R" "H" "D" "X" ± "D" IHDS Shaped Tips Only "Y" ±.0004 "K" ± "U" ±.0004 "A" 2X COUNTER BORED AND TAPPED FOR TOP OR BOTTOM MOUNTING. 2X "S" "G" ±.005 "G" ±.005 "B" SHAPE CAT. NO. D H A B G K R S U X Y Screw Size Tapped Hole IHDS / /8-16 IHDS / /8-16 IHDS / /8-16 IHDS / /8-16 IHDS /2-13 5/8-11 IHDS /2-13 5/

32 SPECIAL SHAPES NOTE: If not specified: Key will be located as shown on page 35. Alternate key locations at 15 increments are available for no additional charge. For punches, external radii will be.005 unless otherwise noted. For dies/guides, internal radii will be.007 unless noted. All shapes can be mirrored. Punches, guides, and dies are viewed in die position. Use die view when ordering tooling. All shapes are centered on shank unless otherwise noted. Die View C = centerline T.S. = theoretical sharp T.I. = theoretical intersection L 90 GROUP A GROUP A S1 S3 - S3A S4 S7 S8 180 S9 S23 S23A S26 S28 0 S50 S51 S59 S S69 S81 S97 S100 32

33 GROUP A SPECIAL SHAPES NOTE: If not specified: Key will be located as shown on page 35. Alternate key locations at 15 increments are available for no additional charge. For punches, external radii will be.005 unless otherwise noted. For dies/guides, internal radii will be.007 unless noted. All shapes can be mirrored. Punches, guides, and dies are viewed in die position. Use die view when ordering tooling. All shapes are centered on shank unless otherwise noted. Die View C = centerline T.S. = theoretical sharp T.I. = theoretical intersection L GROUP A S102 S103 S105 S106 S S109 S110 S121 S122 S123 0 S124 S161 S162 S163 S164 S165 S S167 S170 33

34 SPECIAL SHAPES GROUP B NOTE: If not specified: Key will be located as shown on page 35. Alternate key locations at 15 increments are available for no additional charge. For punches, external radii will be.005 unless otherwise noted. For dies/guides, internal radii will be.007 unless noted. All shapes can be mirrored. Punches, guides, and dies are viewed in die position. Use die view when ordering tooling. All shapes are centered on shank unless otherwise noted. Die View C = centerline T.S. = theoretical sharp T.I. = theoretical intersection L 90 S6 S10 S11 S S13 S14 S15 S16 0 S17 S18 S19 S S21 S22 S24 S30 34

35 GROUP B SPECIAL SHAPES NOTE: If not specified: Key will be located as shown on page 35. Alternate key locations at 15 increments are available for no additional charge. For punches, external radii will be.005 unless otherwise noted. For dies/guides, internal radii will be.007 unless noted. All shapes can be mirrored. Punches, guides, and dies are viewed in die position. Use die view when ordering tooling. All shapes are centered on shank unless otherwise noted. Die View C = centerline T.S. = theoretical sharp T.I. = theoretical intersection L 90 S31 S33 S35 S S40 S41 S42 S43 0 S46 S52 S53 S54 S55 S S57 S58 35

36 SPECIAL SHAPES GROUP B NOTE: If not specified: Key will be located as shown on page 35. Alternate key locations at 15 increments are available for no additional charge. For punches, external radii will be.005 unless otherwise noted. For dies/guides, internal radii will be.007 unless noted. All shapes can be mirrored. Punches, guides, and dies are viewed in die position. Use die view when ordering tooling. All shapes are centered on shank unless otherwise noted. Die View C = centerline T.S. = theoretical sharp T.I. = theoretical intersection L 90 S60 S61 S62 S66 S79 S82 S83 S S87 S88 S91 S S114 S115 S116 S117 36

37 GROUP B SPECIAL SHAPES NOTE: If not specified: Key will be located as shown on page 35. Alternate key locations at 15 increments are available for no additional charge. For punches, external radii will be.005 unless otherwise noted. For dies/guides, internal radii will be.007 unless noted. All shapes can be mirrored. Punches, guides, and dies are viewed in die position. Use die view when ordering tooling. All shapes are centered on shank unless otherwise noted. Die View C = centerline T.S. = theoretical sharp T.I. = theoretical intersection L 90 S118 S119 S120 S QTY OF TABS S126 S127 S128 S S168 S169 S171 S S174 S176 S177 S179 37

38 ALTERATION INFORMATION CODES A2 Air hole diameter A3 Air hole diameter A4 Air hole diameter A6 Air hole diameter ALTERATIONS A9 Air hole diameter A12 Air hole diameter ABR Blend radius for other than.500 inch (rounds only) ABRD Point length: longer than longest std. length (rounds only) ABR Point length: longer than longest std. length (shapes only) AD Reduce body diameter ADL Altered die land (smaller) AE Ejector size-different than standard for punch AH Reduce head diamter AHR Altered radius under head AK Add key to other than shape tool AL Overall length shorter (shorten shank, maintain point) AP Smaller than standard P (rounds) ART Relief taper other than standard ARD Relief diamter larger than standard size AT Reduced Head Thickness AW Smaller than standard W (shapes) EBT Extra back taper MK Multiple keys NS No side hole - Ejector PL Precision overall length PT Precision head thickness SF Key other than 15 SH Slug Hugger SL Shear location at high point on Omni Shear WN Whistle notch SL = o Standard Effex PinPoint SheerPerfection SURFACE FINISH OPTIONS A conventional radial grind with a finish measuring 6-8 micron for reduced galling, increased wear resistance and longer punch life. Grind lines of our standard finish are altered so they run parallel to the centerline of the tool. Punches glide smoothly, reducing build-up of loose particles and requiring less pressure for easier stripping. This straight line grind finish is produced by precision grinding parallel with the centerline fo the tool and then indexing the punch in millionths increments to achieve the required shape. It also improves the lubrication-retaining characteristics of the ridges and requires less tonnage for straight shearing. Available alone or in combination with any other finish, this polish improves the finish of any punch by up to 4 microns. This is an ideal solution for forming applications to prevent marring resulting from running metal against metal. Sheer- Perfection is also available on extrusion dies and other internal features. 38

39 ALTERATION INFORMATION Alterations are for ranges beyond the sizes listed in catalog. HEAD THICKNESS AT Stock removed from head end. Thinner head shortens overall length. PRECISION HEAD held to PT HEAD DIAMETER AH Maximum head diameter reduction is equal to the body size. OVERALL LENGTH AL Shorter length: Punch - Shorten shank maintain point. Headed Die - Stock removed shortens land length. imum length: Dies - Headless products =.250 Dies - Headed products = T PRECISION LENGTH: Held to PL BODY DIAMETER AD Body Dia Punch. D Ejector. D Die. D POINT LENGTH AB Longer than longest standard length. length is shortened; overall length does not change (minimum shank length.750) LAND THICKNESS ADL Hole Size Max. Land Material Thk. Land Thk P over To minimize slug packing, land length should be shortened for material thickness under.030 or hole diameter under.250. RELIEF DIAMETER ARD Larger relief diameter than specified for P range. EXTRA BACK TAPER EBT The stripping tonnage and the likelihood of galling are reduced by increasing the back taper on the punch tip. Standard taper: For Tol. #1 =.0005/inch/side For Tol. #2 =.0001/inch/side NO BACK TAPER NBT Maintains exact punch diameter after sharpening tip for close tolerance work. STRAIGHT BEFORE RADIUS SBR = B- R 2 -(R-( D P* )) 2 2 *Use P or W whichever is smaller 39

40 KEYING INFORMATION Punches are viewed looking through the head Key-9 Key-10 For standard "M" dimension for keys 1-4 see chart below. For keys 5,6,9 & 10 consult with sales for prices (full length keys). Standard key location Y =0º Alternate Y available upon request Dies are viewed from top Key-9 Key-10 Key-8 (1/4 Dowel) HEADED DIE Die View Key-3&4 See chart below Key-5 Key-9 For Standard M dimensions on keys 1-4 see chart below. Standard Headless Die X=.250 unless specified. Top View Top View DOWEL PIN KEYING M =.5D + 1/2 dowel diameter: Headed punches, dies & guides M dimension: Headless dies and guides (see chart) FLAT KEYING M =.5D: Headed punches, dies and guides M dim. : Headless dies, guides and working end keys (see chart) D D Dowel.1875 Dowel D/2 D/2 M D M DOWEL KEY TOLERANCE "M" Radial 0 o 4' 0 o 2' FLAT KEY TOLERANCE "M" Radial.001/inch.0005/inch 40

41 EJECTOR COMPONENTS EJECTOR HOLE DIAMETER SPRING HOLE DIAMETER EJECTOR PIN EXTENSION MINIMUM PUNCH DIAMETER (D MINIMUM POINT DIAMETER (P) MAXIMUM SHANK LENGTH MAXIMUM POINT LENGTH (B) PART DESCRIPTION SET PART NO. EJ2 EJ3 EJ4 EJ6 EJ9 EJ12 SCREW SIZE (S /4-28 5/16-24 LENGTH (L) DIAMETER (D) FREE LENGTH (L) PRESSURE (1/8 pre-load) BLS HEAD DIAMETER (H) HEAD THICKNESS (T) PIN DIAMETER (D) LENGTH (L) NOTE: Pre-packaged component sets include set screw, spring and pin. One set contains 10 set screws, 10 springs and 10 pins. The spring and pin are for the longest punch available for the set. User must cut the spring and pin to size for shorter length punches. SPRINGS PINS SCREWS EJ2SPRING EJ2PIN EJ2SCREW EJ3SPRING EJ3PIN EJ3SCREW EJ4SPRING EJ4PIN EJ4SCREW EJ6SPRING EJ6PIN EJ6SCREW EJ9SPRING EJ9PIN EJ9SCREW EJ12SPRING EJ12PIN EJ12SCREW 41

42 TONNAGE CALCULATION Tonnage (U.S.) = Total Perimeter Inches (P) x Material Thickness (T) x 25 x Material Multiplication Factor (F) x Shear Factor (S). Tonnes (Metric) = Total Perimeter Distance (P) x Material Thickness (T) x.0352 x Material Multiplication Factor (F) x Shear Factor (S). 100% 90% 80% 70% 60% 50% 40% 30% 20% 10% MATERIAL MULTIPLICATION FACTOR (F) Material Description Multiplier (F) Aluminum - Soft Sheet.3 Aluminum - Half Hard.38 Aluminum - Hard.5 Brass - Soft Sheet.6 Brass - Half Hard.7 Copper - Rolled.57 Steel - Mild 1 Steel - ASTM - A Steel - 50 Carbon 1.4 Steel - Cold Drawn 1.2 Steel - Stainless 1.4 Spring Steel - (tempered) 4 Based on Mild Steel Shear Strength of 50,000 P.S.I. (345MPa) SHEAR FACTOR(S).062 (1.59mm) CONCAVE SHEAR 0% In. (1.90) (2.66) (3.42) (4.55) (5.31) (6.35) (7.94) (9.53) (11.1) (12.7) (mm).125 (3.18mm) CONCAVE SHEAR.250 (6.35mm) CONCAVE SHEAR.438 (11.1mm) CONCAVE SHEAR Shear Tonnage Chart: To find the actual tonnage required when using a given shear, multiply the calculated tonnage by the percentage shown on the chart for a specified material thickness. NON-FERROUS Gauge Decimal (mm) MATERIAL THICKNESS Gauge Decimal (inches) GAUGE NO. STEEL SHEETS Gauge Decimal (inches) Gauge Decimal (mm)

43 Optima Coating Solutions for Your Applications COATINGS Developed by Wilson Tool Engineers, Optima is a great choice for most applications. With a micro hardness of 3500 HV, Optima far exceeds the hardness levels that can be achieved with conventional tool steels and may outlast untreated tools by as much as 5-7 times. Optima provides increased wear resistance, improves surface finish and greater resistance to corner breakdown. It has a coefficient of friction 0.3 and a purple to gray color. OptimaX Takes our original Optima coating to the next level. This two part coating process offers all the wear resistance and hardness of Optima plus provides added lubricity and further reduces galling. OptimaX is ideal for stamping material such as aluminum as well as for forming carbon steels, alloy steels, stainless and Aluminum. It has a black color and a coefficient of friction of TiCrN This nano-layer coating with a micro hardness of 4000 HV provides a very high hardness in conjunction with low friction and galling resistance. It has a pale gold/silver color and a coefficient friction of TiCrN is a general purpose coating for piercing and forming applications. TiCrN works well in all types of materials, both ferrous and non-ferrous. Wearbeater This is a Titanium Nitride coating (TiN) with a hardness of 2300 HV. Wearbeater reduces galling on galvanized and soft materials by increasing lubricity. It is used in forming and extrusion applications. Wearbeater has a gold color and a coefficient of friction of 0.4. AlCrN A next generation film which provides excellent hardness and wear resistance when piercing materials such as HSLA and Stainless Steel. ALCrN has a micro hardness of 3200 HV and a Grey color. It has a coefficient of friction of 0.6. AlCrN is substantially tougher than TiAlN and AlTiN, which makes it more suitable for high impact applications. (Note: Not recommended for aluminum applications.) TiZrN The multi-layer film structure of TiZrN gives it exceptional hardness and toughness; it has a micro hardness of 3500 HV. TiZrN was designed for stamping and forming non-ferrous materials like, but not limited to, aluminum, brass and bronze. It has a pale gold color and a coefficient of friction of TiZrN is a great coating for wear resistance. AlTiN and TiAlN These coatings are generally interchangeable and could be considered for use in stainless applications as well as HSLA. They have a hardness of 4500 HV, a dark color and a coefficient of friction of The difference between these coatings is the ratio of aluminum to titanium in the film. By varying the percentages, you get different properties / color. The high hardness makes these coatings a good choice for high temperature applications. (Note: Not recommended for aluminum applications.) FORTE TM This is a proprietary multi-layer nano coating that is a good choice for high-pressure applications and punching and forming for high and low alloy steel in all thicknesses. Forte is applied at a lower temperature than CVD coatings resulting in no dimensional changes. It has a hardness of 3500 HV, a dark color and a coefficient of friction of

44 WILSON TOOL INTERNATIONAL WORLD HEADQUARTERS Wilson Tool International - United States Tel (Free): Fax (Free): imapx@wilsontool.com NORTH AMERICA Wilson Tool - Punching and Stamping Division Tel: Fax: Wilson Tool - Press Brake Division Tel: Fax: bending@wilsontoolcanada.com Wilson Tool - Tel: 52 (81) Fax: 52 (81) SOUTH AMERICA Wilson Tool - Argentina Tel: ventasargentina@wilsontool.com EUROPE / MIDEAST / AFRICA Wilson Tool - United Kingdom Tel (Free): Tel: Fax (Free): Fax: or 46 sales@wilsontool.eu.com Wilson Tool - Germany Tel (Free): Tel: Fax (Free): Fax: verkauf@wilsontool.eu.com Wilson Tool - Denmark Tel (Free): Tel: Fax (Free): Fax: sales@wilsontool.dk Wilson Tool - France Tel: +33 (0) Fax: +33 (0) ventes@wilsontool.eu.com Wilson Tool - South Africa Tel: Fax: simon.penney@wilsontool.com Toolspress - Italy Tel: / Fax: info@toolspress.com Milling Puncionadeiras - Brazil Tel/Fax: vendas@milling.com.br CHINA / PACIFIC RIM Wilson Tool - China Tel: Fax: sales@wilsontool.cn S401C 2015 Wilson Tool International