Facts and figures MULTILIFT SELECT 15
|
|
- Julian Bell
- 5 years ago
- Views:
Transcription
1 Facts and figures MULTILIFT SELECT 15
2 MULTILIFT SELECT 15 Technical data min. 180 Stroke Z-axis Stroke X-axis Clamping face fixed mould platen 220 E A D K Stroke Y axis 195 B 2) C 157 P Conveyor belt available as an option L Guarding available as an option G M 1) R Working area S N 1) Wider conveyor belt possible in conjunction with extension of the Z-axis 2) Crossing height can be increased by 200 as an option 2
3 Technical data MULTILIFT SELECT 15 Machine type Dim. A Dim. B 1) Dim. C Dim. D Dim. E Dim. G Dim. K Conveyor belt Dim. N max. Extended *) Dim. L Dim. M 2) 570 A / E / H / S / E GOLDEN ELECTRIC 570 C GOLDEN EDITION / A / H / S / ( ) ) 720 A / H / S / ( ) ) 820 A / H / S / ( ) ) 920 A / H / S / ( ) ) Machine type Dim. P Dim. R *) Dim. S Extended *) Extended 570 A / E / H / S / / E GOLDEN ELECTRIC 570 C GOLDEN EDITION / / A / H / / S 695 (620 3) ) ( ) ) / ( ) ) ( ) ) ( ) ) / ( ) ) ( ) ) 720 A / H / / S 765 (690 3) ) ( ) ) / ( ) ) ( ) ) ( ) ) / ( ) ) ( ) ) 820 A / H / / S 765 (690 3) ) ( ) ) / ( ) ) ( ) ) ( ) ) / ( ) ) ( ) ) 920 A / H / / S 695 (570 3) ) (970 3) ) / ( ) ) ( ) ) ( ) ) / ( ) ) ( ) ) *) Optional 1) Crossing height can be increased by 200 as an option 2) Wider conveyor belt possible in conjunction with extension of the Z-axis 3) Values in brackets apply for version with servo-hydraulic system 3
4 MULTILIFT SELECT 15 Technical data Main axes Machine type Handling weight 3) Z-axis Y-axis X-axis Weight Stroke Speed Stroke Speed Stroke Speed Robot Extended *) Extended *) Extended *) Max. kg Max. /s Max. /s Max. /s kg 570 A / E / H / S / C GOLDEN EDITION / A / H / S / A / H / S / A / H / S / A / H / S / Auxiliary axes (gripper axes) C-axis B-axis *) Torque 2) Weight Torque 2) Weight Nm kg Nm kg 28 2,6 14 3,5 B-axis C-axis *) Optional 1) Gripper plus part weight plus weight of auxiliary axes (B, C axis) 2) At 6 bar pressure level 4
5 Equipment MULTILIFT SELECT 15 The requirement for the use of the MULTILIFT SELECT is an ARBURG ALLROUNDER. Axes Main axes with servo-electric drive for rapid, simultaneous movements with a high repeat accuracy C-axis with pneumatic drive for swivelling the finished parts j B-axis with pneumatic drive for setting down the finished parts in two different rotational positions Pneumatic valves for grippers Pneumatic valves for actuating gripper functions, such as grippers, gripper jaws, cylinders, lifting and rotary units (see additional information): - 1 with blocked central position (5/3) j Additional pneumatic valves (maximum 5) in any combinations of the following versions (see additional information): - with blocked central position (5/3) - with vented central position (5/3) All pneumatic valves connected to the gripper flange with rapid connect couplings Vacuum equipment for grippers Vacuum device (venturi principle) for parts handling with suction devices j Additional vacuum devices (maximum 3) All vacuum equipment connected near the gripper. Including vacuum switches for parts monitoring j Discharge function for reliable part transfer Pneumatic maintenance unit Manually-adjustable filter pressure reducer for adjusting the pressure level Electric on/off function Control Sequence prograing with symbols via SELOGICA. Teach-in function for user-friendly sequence prograing Display selection via function and direct access keys Cycle step display in sequence diagram Robot system can be moved in units analogous to the cycle sequence Three different speeds can be selected in manual mode for fast and reliable prograing. Axes can be moved progressively or incrementally (0.1, 1 or 10 ) Prograable sequence branches for reliable separation of random samples, rejects and sprues Data record for robotic system integrated in data record for injection moulding machine j Synchronous movements of robotic system with ejector and mould opening movement Interface between robotic system and injection moulding machine j Mobile ARBURG Mobile SELOGICA (AMS) control panel for easy and flexible operation Inputs/outputs for grippers Interface with 8 freely prograable inputs for monitoring sensors for gripper functions. All inputs connected to plugs, including counterplug j Additional interface for monitoring 8 further sensors Freely prograable outputs for actuating pneumatic valves for gripper functions. All outputs directly connected to pneumatic valves Inputs/outputs for peripherals Interface (floating) with 4 freely prograable inputs and outputs for peripherals. Connected to 42-pin connector on MULTILIFT, including counterplug j Additional interface (floating) with 4 freely prograable inputs and outputs. Connected to 42-pin connector on MULTILIFT, including counterplug j Additional interface (24V DC) with 16 freely prograable inputs and outputs. Connected to 72-pin connector on MULTILIFT (including counterplug) or in the machine control cabinet Guards j Electrical equipment for protecting one door within the guard fence, fully connected on the machine, including the following: - 2 emergency stop buttons - 1 acknowledge button - 3 switches for door j Corrugated wire mesh guard for housing the robot system Additional options j Conveyor belt for setting down parts, including interface, expandable to include clear button j Universally adjustable removal hand with up to 8 suction devices. Size and design adapted to the machine type and application j Sprue grippers, pneumatically operated with spring return movement Additional information - Pneumatic valve 5/3 with blocked central position for gripper functions, the position of which should be maintained when not actuated, for example, if the safety guard is open, EMERGEN- CY STOP - Pneumatic valve 5/3 with vented central position for gripper functions, which should be depressurised when not actuated, in order to ensure part-protecting transfer via the machine-side ejector, for example. Basic machine j Option 5
6 MULTILIFT SELECT 15 Gripper adaptations Pin no Assignment interface X001 gripper inputs S S 5008 Function Designation Pin no. Function Designation S S V Gripper input V Gripper input 5 GND 16 GND S S V Gripper input V Gripper input 6 GND 19 GND S S V Gripper input V Gripper input 7 GND 22 GND S S V Gripper input V Gripper input 8 GND 25 GND PE Detail E: Gripper flange of vertical axis ± ± ± ± Pneumatic connection C-axis Pneumatic rapid connect couplings Pn 1- Pn 12 for hose size DA6 / DI4 Plug connector for vacuum Va 1 - Va 4 for hose size DA6 / DI4 200 Ø Interface X 011 Gripper inputs Pneum. B and C axis Ø6.6 8 Ø5H7 E Interface X 001-X 002 Gripper inputs S 5001-S
7 Secondary axes MULTILIFT SELECT 15 B axis (pneumatic) 0 90 or 180 Hole pattern, see Detail E, gripper flange C axis (pneumatic) Ø Hole pattern, see Detail E, gripper flange DIN
8 MULTILIFT SELECT 15 ARBURG GmbH + Co KG Arthur-Hehl-Strasse Lossburg Tel.: contact@arburg.com With locations in Europe: Germany, Belgium, Denmark, France, United Kingdom, Italy, Netherlands, Austria, Poland, Switzerland, Slovakia, Spain, Czech Republic, Turkey, Hungary Asia: People s Republic of China, Indonesia, Malaysia, Singapore, Taiwan, Thailand, United Arab Emirates America: Brazil, Mexico, USA For more information, please go to ARBURG GmbH + Co KG The brochure is protected by copyright. Any utilisation, which is not expressly permitted under copyright legislation, requires the previous approval of ARBURG. All data and technical information have been compiled with great care. However we accept no responsibility for correctness. Individual illustrations and information may deviate from the actual delivery condition of the machine. The relevant valid operating instructions are applicable for the installation and operation of the machine. ARBURG GmbH + Co KG DIN EN ISO certified _EN_GB_ Subject to alterations
Cyclone Click to go to the page. Cyclone
Cyclone.0311.2 Click to go to the page Cyclone The Cyclone (1,000-8,000 CFM) Suitable for collection of virtually any type of dust Applications: Heavy Moulding Grinding Planing Cabinet Shops Dust Transfer
More informationThermal Mass Flow Meter for Gases
Thermal Mass Flow Meter for Gases measuring monitoring analysing Direct mass flow rate measurement of gases Measuring accuracy: ±1.0% f.s. +0.5% m.v. pmax PN 16, tmax 175 C Fast response time No moving
More informationcompact ejector, Series ECS with release valve with silencer with non-return valve, With filter vacuum switch: electronic 1x PNP and 1x analog
with release valve with silencer with non-return valve, With filter vacuum switch: electronic x PNP and x analog Ambient temperature min./max. +0 C / +0 C Medium temperature min./max. +0 C / + C Working
More information2017 Source of Foreign Income Earned By Fund
2017 Source of Foreign Income Earned By Fund Putnam Emerging Markets Equity Fund EIN: 26-2670607 FYE: 08/31/2017 Statement Pursuant to 1.853-4: The fund is hereby electing to apply code section 853 for
More informationCheck-Q-meter. Table of contents. Features. Functions. RE 27551/ /10 Replaces: Type FD
Check-Q-meter RE /0.0 /0 Replaces: 09.9 Type FD Nominal size... Series ax. Operating pressure 0 bar ax. Flow 0 l/min K9/ Table of contents Contents Page Features Functions Ordering details Symbols Functional
More informationRotary modules.
Rotary modules www.comoso.com www.comoso.com Rotary modules ROTARY MODULES Series Size Page Rotary modules RM swivel unit 156 RM 08 160 RM 10 162 RM 12 164 RM 15 168 RM 21 172 RM rotor 176 RM 50 180 RM
More informationAF SERIES AWEA MECHANTRONIC CO., LTD. High Performance Vertical Machining Center AGENT ISO 9001 ISO 14001
AWEA MECHANTRONIC CO., LTD. HEADQUARTERS 629, Suezhetou Section, Kwanpu Rd., Wenshan Li, Hsinpu, Hsinchu, Taiwan TEL : +886-3-88-191 FAX : +886-3-88-19 Website : www.awea.com CENTRAL TAIWAN SCIENCE PARK
More informationTSK. Flap-Type Flowmeter. Range: to GPM Accuracy: ± 2.5% of Full Scale P max. : 580 PSI T max
Flap-Type Flowmeter measuring monitoring analyzing TSK Range: 6.6...26.4 to 880...6600 GPM Accuracy: ± 2.5% of Full Scale P max : 580 PSI T max : -40 572 F Connection: Wafer Flange 1.5" 20" ASME Material:,
More information2.9. Namur Valves 2.9. page 175. Namur 1/4 also called Namur 1 in accordance to VDI / VDE Namur 1/2 also called Namur 2.
2.9 page 175 Namur 1/4 also called Namur 1 in accordance to VDI / VDE 3845. Namur 1/2 also called Namur 2. 2.9 Namur Valves + Selected models are available for low temperature application. Temperature-range:
More informationCanadian Imports of Honey
of 0409000029 - Honey, natural, in containers of a weight > 5 kg, nes (Kilogram) Argentina 236,716 663,087 2,160,216 761,990 35.27% 202.09% /0 76,819 212,038 717,834 257,569 35.88% 205.69% /0 United States
More informationDOG-1/-3. Oscillation Flowmeter. for gases. Measuring ranges: m 3 /h air : 120 C. p max. : PN 40; t max
Oscillation Flowmeter for gases measuring monitoring analysing DOG1/3 Measuring ranges: 0.2 20... 200 20000 m 3 /h air p max : PN 40; t max : 120 C Connection: flange DN 25... DN 400 Material: cast iron,
More informationDVZ. Vortex Flowmeter Compact. for low viscosity liquids. Range: l/min. Accuracy: ±2.5% of full scale. p max : 20 bar; t max : 80 C
Vortex Flowmeter Compact for low viscosity liquids measuring monitoring analysing DVZ Range: 0.4. 000 l/min Accuracy: ±.% of full scale p max : 0 bar; t max : 80 C Connections: G ¼... G, ¼" NPT..." NPT
More informationOperating Instructions for Digital Manometer. Model: MAN-SD
Operating Instructions for Digital Manometer Model: MAN-SD 1. Contents 1. Contents...2 2. Note...3 3. Instrument Inspection...3 4. Regulation Use...4 5. Operating Principle...4 6. Mechanical Connection...5
More informationOscillation Flow Meter for Gases
Oscillation Flow Meter for Gases measuring monitoring analysing Measuring ranges: 0.2 to 000 m 3 /h air pmax: PN 0, tmax: 0 C Connection: flange DN 25 DN 00 : Cast Iron, steel or stainless steel Accuracy:
More informationMetal core drills the most cost-effective drilling experience.
Metal core drilling Metal core drills the most cost-effective drilling experience. Core drilling is an extremely efficient process: faster, quieter and more accurate than twist drilling. And since core
More informationIts modular concept allows to build up a ball valve for any degree of automation and any kind of application
Type 2657...59 DN 10 up to 80 mm; Plastic; 2/2 way dvantages/benefits ntegrated pilot valves, position feed-back and limit switches available Customized system solutions with Burkert valves & sensors With
More informationINDUSTRIAL TRIALS OF A SYSTEM FOR MEASUREMENT OF COUPLING FORCES
INDUSTRIAL TRIALS OF A SYSTEM FOR MEASUREMENT OF COUPLING FORCES Uwe Kaulbars (1), Enrico Concettoni (2) (1) BG Institute for Occupational Safety and Health (BGIA), Sankt Augustin (Germany) (2) Dept. of
More informationRoHS. Versatile. X g. X 2 e
s IN8, - and The inclinometers of the IN8 series allow measuring inclinations in the range of ±85 or -dimensional inclinations up to 0. With their high robustness, their protection level up to max. IP9k
More information74VHCT138ATTR 3 TO 8 LINE DECODER (INVERTING)
3 TO 8 LINE DECODER (INVERTING) HIGH SPEED: t PD = 7.6 ns (TYP.) at V CC = 5V LOW POWER DISSIPATION: I CC = 4 µa (MAX.) at T A =25 C COMPATIBLE WITH TTL OUTPUTS: V IH = 2V (MIN.), V IL = 0.8V (MAX) POWER
More informationEnabling switch ZSB. 3-stage function Dual-channel version Housing G3 Coiled connection cable Two illuminated buttons Including holder
witch ZB switch ZB stage function Dualchannel version Housing G Coiled connection cable ZB, stage function 00 Ø0 0 Ø. 0 stage function function is only active in the second stage (middle position, actuating
More informationIBV Series C Carbon Steel Inverted Bucket Vertical Steam Trap
Local regulations may restrict the use of this product to below the conditions quoted. In the interests of development and improvement of the product, we reserve the right to change the specification without
More informationIBV Series Z Alloy Steel Inverted Bucket Vertical Steam Trap
Local regulations may restrict the use of this product to below the conditions quoted. In the interests of development and improvement of the product, we reserve the right to change the specification without
More informationAerospace part number guide
TRELLEBORG SEALING SOLUTIONS Aerospace part number guide YOUR PARTNER FOR SEALING TECHNOLOGY Your Partner for Sealing Technology Trelleborg Sealing Solutions is a major international sealing force, uniquely
More informationEUROMASTER HYDRAULIC PRESSBRAKES
EUROMASTER HYDRAULIC PRESSBRAKES EUROMASTER HYDRAULIC PRESSBRAKES 02_ EUROMASTER Euromaster 50250 The Euromaster has been developed as a modern pressbrake with electronic levelling and depth control Synchro
More informationBSH Description. 2. Features. 3. Applications. 4. Pinning information. N-channel enhancement mode field-effect transistor
M3D88 Rev. 25 August 2 Product specification. Description in a plastic package using TrenchMOS technology. Product availability: in SOT23. 2. Features TrenchMOS technology Very fast switching Logic level
More informationDimensional drawing face mount flange radial. R = bending radius min. 40 mm. Dimensional drawing face mount flange axial
Incremental Encoder DRS/DRS, face mount flange up to 8,2 Dimensional drawing face mount flange radial Incremental Encoder Connector or cable outlet Protection class up to IP s TTL and HTL Zero-Pulse-Teach
More informationOverload Relays. SIRIUS 3RU1 Thermal Overload Relays. 3RU11 for standard applications. 5/46 Siemens LV 1 AO 2011
SIRIUS 3RU1 Thermal Overview 1 2 7 3 4 6 "Increased safety" type of EEx e according to ATEX directive 94/9/EC The 3RU11 thermal overload relays are suitable for the overload of explosion-proof motors with
More informationBASE. Rotary limit switch. OptiOnS. FEAtuRES. CERtiFiCAtiOnS
Rotary limit switch BASE Rotary limit switch used to control and measure the movement of industrial machines. Its compact size make it suitable for use in narrow spaces. FEAtuRES It consists of a gear
More informationLINE TECH Linear Modules. Ready to built-in linear modules with drive
Ready to built-in linear modules with drive Anodized profile, produced in extrusion molding method Linear rail guiding system (LM3 LM5) Actuation by ball screw, high-helix lead _ screw or toothed belt
More informationAN2970 Application note
Application note Principles of capacitive touch and proximity sensing technology The objective of this document is to present the principles of capacitive sensing and charge transfer used in STMicroelectronics
More informationIdentification system for short product names. Changes/amendments at a glance. 2 Bosch Rexroth AG OBB omega modules R ( )
Omega Modules OBB 2 OBB omega modules R9990079 (206-05) Identification system for short product names Short product name Example: O B B - 085 - N N - System = Omega module Guideway = Ball Rail System Drive
More informationREADY TO SCRAP: HOW MANY VESSELS AT DEMOLITION VALUE?
READY TO SCRAP: HOW MANY VESSELS AT DEMOLITION VALUE? August 206 VesselsValue Global number of vessels at demolition value At scrap value 7,27 6 Above scrap value,8 84 Number of vessels at demolition value
More informationDistributed by: www.jameco.com 1-800-831-4242 The content and copyrights of the attached material are the property of its owner. L7900 SERIES NEGATIVE VOLTAGE REGULATORS OUTPUT CURRENT UP TO 1.5A OUTPUT
More informationDRS 61: Incremental encoders, number of lines and zero pulse width freely programmable DRS 60: Incremental Encoders with Zero-Pulse-Teach
NEW DRS : Incremental encoders, number of lines and zero pulse width freely programmable DRS : s with Zero-Pulse-Teach Further highlights of this generation of encoders: Simple zero-pulse-teach by pressing
More informationAppendix B: Detailed tables showing overall figures by country and measure
44 country and measure % who report that they are very happy Source: World Values Survey, 2010-2014 except United States, Pew Research Center 2012 Gender and Generations survey and Argentina 32% 32% 36%
More informationthe foundation of any business starts here
the foundation of any business starts here TABLE OF CONTENT The Company... 3 Electric Motors... 4 Gearboxes... 5 Automation Products... 6 Electric Components... 9 Pneumatics... 12 Hydraulics... 13 Handling
More informationDS 300. Electronic Pressure Switch. with IO-Link interface. Stainless Steel Sensor. accuracy according to IEC 60770: 0.35 % FSO.
DS 00 Electronic Pressure Switch with IO-Link interface Stainless Steel Sensor accuracy according to IEC 60770: 0.5 % FSO Nominal pressure from 0... 00 mbar up to 0... 600 bar Digital output signal IO-Link
More informationPREMIUM PM Automatic horizontal sliding car door EN compliance
Automatic horizontal sliding car door EN 81-0 compliance Residencial Commercial Service lifts DOC-FECMCBPP0C00EN ONGOING VERSION: 16-0-014 ENG www.fermator.com Door configuration LIFT APPLICATION Door
More informationPRESSURE GAUGE SELECTORS
PRESSURE GUGE SELECORS Gauge isolator valves are designed to protect pressure gauges from pressure shocks when the pressure reading is not required; after each reading setting the selector to the closed
More information4/4-way servo solenoid directional control valves, directly operated, with electrical position feedback and on-board electronics (OBE)
4/4-way servo solenoid directional control valves, directly operated, with electrical position feedback and on-board electronics (OBE) RE 9035/. Replaces: 05. 1/1 Type 4WRPEH 6 Size 6 Unit series X Maximum
More informationDistributed by: www.jameco.com 1-800-831-4242 The content and copyrights of the attached material are the property of its owner. LM117/217 LM317 1.2V TO 37V VOLTAGE REGULATOR OUTPUT VOLTAGE RANGE: 1.2
More informationStandard specifications ZX165UFE02001
Standard specifications ZXUF000 May, 0 KAWASAKI HAVY INDUSTRIS, LTD. ROBOT DIVISION Materials and specifications are subject to change without notice. Specification : (Arm): (Controller): 00-DA 0-00DA
More informationTurbine Meter TRZ 03 PRODUCT INFORMATION. Reliable Measurement of Gas
Turbine Meter TRZ 0 PRODUCT INFORMATION Reliable Measurement of Gas TURBINE METER TRZ 0 Method of operation, Construction Method of operation The TRZ 0 turbine meter is a flow meter suitable for gas measurement
More informationGlobal Data Catalog initiative Christophe Charpentier ArcGIS Content Product Manager
Global Data Catalog initiative Christophe Charpentier ArcGIS Content Product Manager ccharpentier@esri.com We are in a global economy Global Economy Business and Operations are now global Strategic need
More informationLD-LP-LL-LC Rope Safety Switches with reset for emergency stop
TECHNICA DATASHEET D-P--C Rope Safety Switches with reset for emergency stop Metal or polymer housing, from one or three conduit entries Protection degree IP6 In conformity with EN ISO 13850 contact blocks
More informationSYNCHROMASTER HYDRAULIC PRESSBRAKES
HYDRAULIC PRESSBRAKES HYDRAULIC PRESSBRAKES 02_ Synchromaster 30100 STANDARD EXECUTION - Electro-hydraulic levelling and depth stop setting by Synchro system - Automatic compensation of the sideframe deflection
More informationQuick Guide QUICK GUIDE. Activity 1: Determine the Reaction Rate in the Presence or Absence of an Enzyme
Activity 1: Determine the Reaction Rate in the Presence or Absence of an 1. Find your 15 ml conical tubes labeled Stop Solution, 1.5 mm Substrate, and Buffer. Write your initials on each tube. 2. Label
More informationQUANTUM CONCEPT. Swimming User s Manual
QUANTUM CONCEPT Swimming User s Manual 480.508.0 Version.4 Edition July 05 Documentation Updates Swiss Timing Ltd. reserves the right to make improvements in the products described in this documentation
More informationMIK. Electromagnetic Flowmeter Compact. for conductivity liquids. Range from liquids, acids and caustic solutions:
Electromagnetic Flowmeter Compact for conductivity liquids measuring monitoring analysing MIK Range from liquids, acids and caustic solutions: 0.0-0. 3-700 l/min frequency-, switching-, analogue output
More informationVOLUMEC. Valve Position Indicator 5
VOLUMEC Valve Position Indicator 5 2 KRACHT CORP. 8600 S Wilkinson Way Unit A Perrysburg, OH 43551 USA P +1 419 874 1000 F +1 419 874 1006 flowmeters@krachtcorp.com www.krachtcorp.com VOLUMEC Valve Position
More informationFlow Divider Type MH2FA, Series 4X (Differential lock) Size 12 to 32 up to 420 bar up to 300 L/min
RE 8/0.98 8/0.9 Flow Divider Type MHF, eries X (Differential lock) ize to up to 0 bar up to 00 /min RE 8/0.98 Replaces: 0.9 Characteristics: Double-acting (dividing and summating) flow divider Fixed division
More informationPHOENIX CONTACT - 04/2016. Features
Signal conditioner Data sheet 100238_de_06 1 Description PHOENIX CONTACT - 04/2016 Features The MCR-C-UI-UI(-450)-DCI(-NC) 3-way isolation amplifier is used to electrically isolate and convert analog signals.
More informationSemi-automatic titrators PH-Burette. A great ph-meter with integrated burette. Incredible price! Infinite possibilities
Semi-automatic titrators PH-Burette. A great ph-meter with integrated burette. Incredible price! Infinite possibilities instruments 5 YEARS G U A R A N T E E Quality at a reasonable price The optimum combination
More information04 June Dim A W V Total. Total Laser Met
4 June 218 Member State State as on 4 June 218 Acronyms are listed in the last page of this document. AUV Mass and Related Quantities Length PR T TF EM Mass Dens Pres F Torq Visc H Grav FF Dim A W V Total
More informationVK2 volume flow controller Overview
New option with sound attenuator Maintenance-free VK2 volume flow controller that operates without an auxiliary power supply, for ventilation and air conditioning systems. Adjustable on site. Outstanding
More information5/2-5/3 SPOOL VALVES MULTIFUNCTION air operated or solenoid air operated with subbase ISO 5599/1 sizes 1, 2 and 3
/ - / SPOOL VALVES MULTIFUNCTION air operated or solenoid air operated with subbase ISO 99/ sizes, and Series Fluids air or inert gas, filtered, lubricated or not Operating pressure Pilot pressure Ambient
More informationCONTINENT WISE ANALYSIS OF ZOOLOGICAL SCIENCE PERIODICALS: A SCIENTOMETRIC STUDY
CONTINENT WISE ANALYSIS OF ZOOLOGICAL SCIENCE PERIODICALS: A SCIENTOMETRIC STUDY Mr.Chopkar Hemraj D. Librarian NKSPT S Arts, Science & Commerce College, Badnapur. (MS) India Mr. Phatak Anil Shahaji Research
More informationProduct description. Compact Modules. Characteristic features. Further highlights
4 Compact Modules Product description Characteristic features Five fine-tuned sizes based on a compact precision aluminum profile with two integrated pre-tensioned ball rail systems Identical external
More informationLatest generation testo air velocity & IAQ probes with cable handle. Instruction manual
Latest generation testo air velocity & IAQ probes with cable handle Instruction manual Contents Contents 1 About this document... 5 2 Safety and disposal... 5 3 System description... 6 4 Description of
More information[ Care and Use Manual ]
Oasis HLB DISKS I. Introduction Oasis HLB is a Hydrophilic-Lipophilic-Balanced, water-wettable, reversed-phase sorbent for all your SPE needs. It is made from a specific ratio of two monomers, the hydrophilic
More informationElectroMechanical Cylinder LEMC
www.lmotion.ru lmotionmail@ya.ru.: (9)9160 ElectroMechanical Cylinder LEMC THE POWER OF KNOWLEDGE ENGINEERING www.lmotion.ru lmotionmail@ya.ru.: (9)9160 ElectroMechanical Cylinder LEMC enefits High efficiency
More informationORTHOBLOC 3000 Drive systems Maintenance
15 en 284 261 282 113 130 120 061 002 264 193 099 001 25 063 65 119 112 133 252 254 1 115 118 04 ORTHOBLOC 3000 Maintenance NOTE LEROY-SOMER reserves the right to modify the characteristics of its products
More informationInfrared Hand-Held Thermometers
Infrared Hand-Held Thermometers measuring monitoring analysing Model: TIR-H... Measuring range from -2... 5 C to -32... 9 C Measuring accuracy: ±1% to ± 2% of measured value Option: analogue output, RS
More informationXBC300 Gen2. Fully-automated debonder and Cleaner
XBC300 Gen2 Fully-automated debonder and Cleaner XBC300 Gen2 FULLY AUTOMATED DEBONDER AND CLEANER The SUSS XBC300 Gen2 debonder and cleaner platform is designed for process development as well as high
More informationS Sapling INSTALLATION MANUAL FOR FIELD SELECTABLE ANALOG CLOCKS SAA SERIES SPECIFICATIONS. advanced time and control systems
INSTALLATION MANUAL FOR FIELD SELECTABLE ANALOG CLOCKS SAA SERIES SPECIFICATIONS Time base: 60 Hz (3-wire system) Quartz (2-wire system) Power input: 85 135 VAC / 60 Hz 7 28 VAC / 60 Hz Current consumption:
More informationElectroMechanical Cylinder LEMC
ElectroMechanical Cylinder EMC ElectroMechanical Cylinder EMC enefits High eficiency ong service life from use of SKF planetary roller screw Compact and robust structural design Modular concept with multiple
More informationL78L00 SERIES POSITIVE VOLTAGE REGULATORS
L78L00 SERIES POSITIE OLTAGE REGULATORS OUTPUT CURRENT UP TO 100 OUTPUT OLTAGESOF 3.3; 5; ; 8; 9; 12; 15; 18; 24 THERMAL OERLOAD PROTECTION SHORT CIRCUIT PROTECTION NO EXTERNAL COMPONENTS ARE REQUIRED
More informationPLUTO The Transport Response to the National Planning Framework. Dr. Aoife O Grady Department of Transport, Tourism and Sport
PLUTO 2040 The Transport Response to the National Planning Framework Dr. Aoife O Grady Department of Transport, Tourism and Sport Dublin Economics Workshop 15 th September 2018 The Story of Pluto National
More informationProduct Data. Brüel & Kjær B. Sound Power Source Type Introduction
Product Data Sound Power Source Type 425 USES: Determination of sound power output of equipment by the Substitution Method Determination, by the Juxtaposition Method, of sound power output of equipment
More information3.2 HP 114 HIGH PERFORMANCE BUTTERFLY VALVE HP 114 TECHNICAL DATA
ug type butterfly valve in double-eccentric construction. Reliable sealing even with extreme temperature and pressure conditions. TECHNICA DATA Nominal diameter: 0 larger nominal diameter on request Face-to-face:
More informationObsolete Product(s) - Obsolete Product(s)
L494 MULTIFUNCTION OLTAGE REGULATOR FOR CAR RADIO PROGRAMMABLE OUTPUTS: TO (00mA); TO (00mA); TO (00mA) STANDBY OUT AND OUT2 WITH INDEPENDENT EN- ABLE CONTROL FOR STAND-BY MODE 0.4A HIGH SIDE DRIER LOAD
More informationMade in Italy HOSE REELS CATALOGUE TECHNOLOGY FOR FLUIDYNAMICS. No. E14/A1
Made in Italy HOSE REELS CATALOGUE TECHNOLOGY FOR FLUIDYNAMICS No. E14/A1 The complete range of our products is presented in the specific catalogues: HOSE REELS CATALOGUE No. E14/A2 HOSE REELS CATALOGUE
More informationAbsolute encoders multiturn
elektronischer electronic multiturn, Multiturn, magnetic magnetisch Sendix M66 / M68 (shaft / hollow shaft) The Sendix M6 with Energy Harvesting Technology is an electronic multiturn encoder in miniature
More informationK 080/12 F 10 K 3-2X/.. Features
RE 2 1/11.02 Replaces: 0.2 Fine throttle Type F Nominal sizes and Series 2X and 3X Maximum operating pressure 2 bar Maximum flow 0 L/min K 00/12 F K 3-2X/.. K 0/ F P 3-3X/.. Overview of contents Contents
More informationInstruction. Vacuum Circuit Breaker Operator Module. Type 3AH 4.16kV to 38kV. Power Transmission & Distribution
Instruction 0001-22-2--00 Vacuum Circuit Breaker Operator Module Type 3AH 4.16kV to 38kV Power Transmission & Distribution Hazardous voltages and high-speed moving parts. Will cause death, serious injury
More informationKeysight Technologies Measuring Substrate-Independent Young s Modulus of Low-k Films by Instrumented Indentation. Application Note
Keysight Technologies Measuring Substrate-Independent Young s Modulus of Low-k Films by Instrumented Indentation Application Note Introduction In digital circuits, insulating dielectrics separate the conducting
More informationKD A LOW DROP POSITIVE VOLTAGE REGULATOR ADJUSTABLE AND FIXED
7.5A LOW DROP POSITIVE VOLTAGE REGULATOR ADJUSTABLE AND FIXED THREE TERMINAL ADJUSTABLE OR FIXED OUTPUT VOLTAGE 1.5V,1.8V, 2.5V, 3.0, 3.3V OUTPUT CURRENT UP TO 7.5A 1.4V MAX DROPOUT VOLTAGE AT FULL LOAD
More informationIndustrial Resistance Thermometers according to DIN Model MWD
Industrial Resistance Thermometers according to DIN measuring monitoring analysing MWD OMeasuring O range: -98... +600 ºC O O Pt00 sensor: class A, class B, class /3, class /0, or O O Output: resistance
More informationHigh Pressure fi lters. FHB series. Maximum working pressure up to 32 MPa (320 bar) - Flow rate up to 485 l/min
High Pressure fi lters FHB series Maximum working pressure up to MPa (0 bar) - Flow rate up to 8 l/min High Pressure fi lters Introduction FILTER SIZING INDEX CALCULATION CORRECTIVE FACTOR Page Introduction
More informationSpare parts list. Spare parts list
Spare parts list TXHt 120, 120r, 120F, 120Fr, 120V, TXHt 150, 150r, 150F, 150Fr, 150V TXHt 200, 200r, 200F, 200Fr, 200V, TXHt 250w, 250wr, 250wF, 250wFr TXHt 400w, 400wr, 400w HD, 400wr HD Spare parts
More informationHIGH FREQUENCY WELDING MACHINES FOR PRODUCTION OF: MEDICAL BAGS PARA-MEDICAL AND ORTHOPEDIC ITEMS
HIGH FREQUENCY WELDING MACHINES FOR PRODUCTION OF: MEDICAL BAGS PARA-MEDICAL AND ORTHOPEDIC ITEMS AUTOM A T I C I N - L I N E W E L D I NG MACHI N E S U N I B L O O D M O DEL FOR PRODUCTI O N O F B L O
More informationApplied Fluid Mechanics
Applied Fluid Mechanics 1. The Nature of Fluid and the Study of Fluid Mechanics 2. Viscosity of Fluid 3. Pressure Measurement 4. Forces Due to Static Fluid 5. Buoyancy and Stability 6. Flow of Fluid and
More informationAir distribution systems. Jet nozzle DW-N2... Swivel jet nozzle DW-V2... Twist nozzle DW-V2-...-DR
Air distribution systems Jet nozzle DW-N... Swivel jet nozzle DW-V... Twist nozzle DW-V-...-DR DS E 01. Jet nozzle and twist nozzle Preliminary remarks Jet nozzle DW N Swivel jet nozzle DW V Twist nozzle
More informationGripper modules GM GMQ 12 - GMQ 32 & GMK 20 - GMK 32
Table of contents: GM Gripper modules GM GMQ - GMQ & GMK 0 - GMK Gripper modules GM GMQ Gripper actuator & gripper GM GMK 0 GMQ 0 Gripper actuator & gripper GMK/GMQ 0 GMK GMQ 0 Gripper actuator & gripper
More information. HIGH SPEED .LOW POWER DISSIPATION .OUTPUT DRIVE CAPABILITY M54HCT138 M74HCT138 3 TO 8 LINE DECODER (INVERTING) t PD = 16 ns (TYP.
M54HCT138 M74HCT138 3 TO 8 LINE DECODER (INVERTING). HIGH SPEED t PD = 16 ns (TYP.) at V CC =5V.LOW POWER DISSIPATION ICC =4µAATTA =25 C.OUTPUT DRIVE CAPABILITY 10 LSTTL LOADS BALANCED PROPAGATION DELAYS
More informationCTV series CHARACTERISTICS LINEAR UNITS
CTV series CHARACTERISTICS The CTV series describes s with a precision ball screw drive and two parallel, integrated, Zerobacklash rail guides. Compact dimensions allow high performance features such as,
More informationCALEFFI. Modulating digital controller for heating and cooling. 161 series 01122/08 GB. replaces dp 01122/05
Modulating digital controller for heating and cooling series REGI ERED SI EN ISO 00:000 Cert. n FM UNI EN ISO 00:000 Cert. n 000 0/0 G replaces dp 0/0 Function The controller can be used with three-point
More informationProduct Data. Brüel & Kjær B. Sound Intensity Calibrator Type 3541
Product Data Sound Intensity Calibrator Type 3541 USES: Sound intensity and particle velocity calibrations Sound pressure calibration Measurement of pressure-residual intensity index FEATURES: Intensity
More informationLamp and Control Panel (Lamp Panel)
www.reinhausen.com Lamp and Control Panel (Lamp Panel) Operating Instructions BA 47/0 EN NOTE! Changes may have been made to a product after going to press with this documentation. We expressly reserve
More informationDRIFTER PLOW-IN-A-BOX
DRIFTER PLOW-IN-A-BOX ASSEMBLY / OWNER S MANUAL Part No: 10-0550 OPERATING INSTRUCTIONS Congratulations! You ve just purchased one of the industry s top plow systems. The DRIFTER Plow System works great
More informationAIR PREPARATION. ELECTRONICALLY CONTROLLED PRESSURE REGULATING VALVE (PROPORTIONAL PRESSURE REGULATING VALVE) SERIES control
AIR PREPARATION ELECTRONICALLY CONTROLLED PRESSRE REGLATING ALE (PROPORTIONAL PRESSRE REGLATING ALE) SERIES control Description Abb. Port size Recommended Type Data Sheet No. flow (l/min)* airfit tecno
More informationR310EN 2403 ( ) The Drive & Control Company
Feed Modules VKK R310EN 2403 (2008.09) The Drive & Control Company Linear Motion and Assembly Technologies Ball Rail Systems Roller Rail Systems Linear Bushings and Shafts Ball Screw Drives Linear Motion
More informationClausing Industrial, Inc. Variable Speed 20" Single and Multi-spindle, Belt Drive Industrial Drill Presses
www.clausing-industrial.com Variable Speed 20" Single and Multi-spindle, Belt Drive Industrial Drill Presses Clausing Industrial, Inc. Two Speed Variable Speeds 150-2000rpm Variable Speeds 200-1300rpm
More informationPHT4NQ10LT. 1. Description. 2. Features. 3. Applications. 4. Pinning information. N-channel enhancement mode field-effect transistor
MD87 Rev. September Product specification. Description in a plastic package using TrenchMOS technology. Product availability: in SOT.. Features TrenchMOS technology Fast switching Low on-state resistance
More informationLD29300xx. 3 A, very low drop voltage regulators. Features. Description
3 A, very low drop voltage regulators Features Very low dropout voltage (Typ. 0.4 at 3 A) Guaranteed output current up to 3 A Fixed voltage with ± 1 % tolerance at 25 C Internal current and thermal limit
More informationInternational Standardization for Measurement and Characterization of Nanomaterials
2012/SOM2/SCSC/CON/008 International Standardization for Measurement and Characterization of Nanomaterials Submitted by: Japan 9 th Conference on Standards and Conformance in the Field of Innovations and
More informationFittings and Pipe Connections
KWD Market Report Fittings and Pipe Connections Europe 2016 Situation and Trends for Heating & Plumbing Pipe Systems Contents: 1. Fittings and pipe connections Europe 2016 page 6 2. Terms and definitions
More informationMulti Core-Drill. Laboratory Asphalt Core-Drill
Multi Core-Drill Laboratory Asphalt Core-Drill 1 MULTI CORE-DRILL LABORATORY ASPHALT CORE-DRILL Advanced Asphalt Core-Drill Specimen preparation and ultimately specimen quality are critical factors in
More informationIEEE Transactions on Image Processing EiC Report
IEEE Transactions on Image Processing EiC Report Clem Karl 9/23/2013 Appreciation of AE Effort AEs are on the front lines of TIP AE effort makes the journal what it is Thank you! 2 Outline TIP Overview
More informationData Sheet. Functional Safety Characteristic Safety Values for BE..(FS) Brakes * _0715*
Drive Technology \ Drive Automation \ System Integration \ Services *22292616_0715* Data Sheet Functional Safety Characteristic Safety Values for BE..(FS) Brakes Edition 07/2015 22292616/EN SEW-EURODRIVE
More information